* gnus.texi (Posting Server): Document message-smtpmail-send-it.

* message.texi (Mail Variables): Add message-smtpmail-send-it.

diff --git a/texi/ChangeLog b/texi/ChangeLog
index fcc3f33..af71e4b 100644 (file)
--- a/texi/ChangeLog
+++ b/texi/ChangeLog
@@ -1,3 +1,9 @@
+2002-08-28  Katsumi Yamaoka  <yamaoka@jpl.org>
+
+       * gnus.texi (Posting Server): Document message-smtpmail-send-it.
+
+       * message.texi (Mail Variables): Add message-smtpmail-send-it.
+
 2002-08-27  Simon Josefsson  <jas@extundo.com>
 
        * gnus.texi (Mail Source Specifiers): Fix :path default.

diff --git a/texi/gnus.texi b/texi/gnus.texi
index 8a93d80..17adc5d 100644 (file)
--- a/texi/gnus.texi
+++ b/texi/gnus.texi
@@ -2125,7 +2125,7 @@ Place point on the subject line of the highest-scored unread article.
 @end table
 
 This variable can also be a function.  In that case, that function
-will be called to place point on a subject line.  
+will be called to place point on a subject line.
 
 If you want to prevent automatic selection in some group (say, in a
 binary group with Huge articles) you can set the
@@ -3853,7 +3853,7 @@ topic.
 
 @item subscribe-level
 When subscribing new groups by topic (see the @code{subscribe} parameter),
-the group will be subscribed with the level specified in the 
+the group will be subscribed with the level specified in the
 @code{subscribe-level} instead of @code{gnus-level-default-subscribed}.
 
 @end table
@@ -4160,7 +4160,7 @@ something like:
 
 If you would like greater control of the time format, you can use a
 user-defined format spec.  Something like the following should do the
-trick: 
+trick:
 
 @lisp
 (setq gnus-group-line-format
@@ -4171,7 +4171,7 @@ trick:
         (format-time-string "%b %d  %H:%M" time)
       "")))
 @end lisp
-            
+
 
 @node File Commands
 @subsection File Commands
@@ -5097,7 +5097,7 @@ as an rfc822 @sc{mime} section; if the prefix is 3, decode message and
 forward as an rfc822 @sc{mime} section; if the prefix is 4, forward message
 directly inline; otherwise, the message is forwarded as no prefix given
 but use the flipped value of (@code{message-forward-as-mime}).  By
-default, the message is decoded and forwarded as an rfc822 @sc{mime} 
+default, the message is decoded and forwarded as an rfc822 @sc{mime}
 section.
 
 @item S m
@@ -8238,7 +8238,7 @@ If a prefix is given, a charset will be asked for.
 
 @vindex gnus-article-wash-function
 The default is to use the function specified by
-@code{mm-inline-text-html-renderer} (@pxref{Customization, , , emacs-mime}) 
+@code{mm-inline-text-html-renderer} (@pxref{Customization, , , emacs-mime})
 to convert the @sc{html}, but this is controlled by the
 @code{gnus-article-wash-function} variable.  Pre-defined functions you
 can use include:
@@ -10808,7 +10808,7 @@ When you press those magical @kbd{C-c C-c} keys to ship off your latest
 
 Thank you for asking.  I hate you.
 
-It can be quite complicated.  
+It can be quite complicated.
 
 @vindex gnus-post-method
 When posting news, Message usually invokes @code{message-send-news}
@@ -10854,6 +10854,10 @@ package correctly.  An example:
       smtpmail-default-smtp-server "YOUR SMTP HOST")
 @end lisp
 
+To the thing similar to this, there is @code{message-smtpmail-send-it}.
+It is useful if your ISP requires the POP-before-SMTP authentication.
+See the documentation for the function @code{mail-source-touch-pop}.
+
 Other possible choises for @code{message-send-mail-function} includes
 @code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
 and @code{feedmail-send-it}.
@@ -16104,7 +16108,7 @@ line from the article you respond to in these cases.
 
 @code{nnvirtual} groups do not inherit anything but articles and marks
 from component groups---group parameters, for instance, are not
-inherited. 
+inherited.
 
 
 @node Kibozed Groups
@@ -16426,7 +16430,7 @@ with the predicate then defined as:
 
 or you could append your predicate to the predefined
 @code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
-wherever. 
+wherever.
 
 @lisp
 (require 'gnus-agent)
@@ -20146,7 +20150,7 @@ functions all take one parameter.
 Internally, Gnus calls @code{gnus-make-predicate} on these specifiers
 to create a function that can be called.  This input parameter to this
 function will be passed along to all the functions in the predicate
-specifier. 
+specifier.
 
 
 @node Moderation
@@ -20851,7 +20855,7 @@ Specifiers}) follows.
 (setq mail-sources
       '((file :prescript "formail -bs spamassassin < /var/mail/%u")
         (pop :user "jrl"
-             :server "pophost" 
+             :server "pophost"
              :postscript "mv %t /tmp/foo; formail -bs spamc < /tmp/foo > %t")))
 @end lisp
 

diff --git a/texi/message.texi b/texi/message.texi
index 91063c3..692a7ff 100644 (file)
--- a/texi/message.texi
+++ b/texi/message.texi
@@ -47,7 +47,7 @@ license to the document, as described in section 6 of the license.
 @page
 
 @vskip 0pt plus 1filll
-Copyright @copyright{} 1996, 1997, 1998, 1999, 2000, 2001, 2002 
+Copyright @copyright{} 1996, 1997, 1998, 1999, 2000, 2001, 2002
      Free Software Foundation, Inc.
 
 Permission is granted to copy, distribute and/or modify this document
@@ -380,9 +380,9 @@ way.  The following variables would come in handy.
 @vindex message-subscribed-addresses
 @item message-subscribed-addresses
 This should be a list of addresses the user is subscribed to.  Its
-default value is @code{nil}.   Example: 
+default value is @code{nil}.   Example:
 @lisp
-(setq message-subscribed-addresses 
+(setq message-subscribed-addresses
       '("ding@@gnus.org" "bing@@noose.org"))
 @end lisp
 
@@ -1206,12 +1206,14 @@ buffers that are initialized as mail.
 @findex message-send-mail-with-sendmail
 @findex message-send-mail-with-mh
 @findex message-send-mail-with-qmail
+@findex message-smtpmail-send-it
 @findex smtpmail-send-it
 @findex feedmail-send-it
 Function used to send the current buffer as mail. The default is
 @code{message-send-mail-with-sendmail}. Other valid values include
 @code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
-@code{smtpmail-send-it} and @code{feedmail-send-it}.
+@code{message-smtpmail-send-it}, @code{smtpmail-send-it} and
+@code{feedmail-send-it}.
 
 @item message-mh-deletable-headers
 @vindex message-mh-deletable-headers
@@ -1252,7 +1254,7 @@ the problem will actually occur.
 @item message-send-mail-partially-limit
 @vindex message-send-mail-partially-limit
 The limitation of messages sent as message/partial.
-The lower bound of message size in characters, beyond which the message 
+The lower bound of message size in characters, beyond which the message
 should be sent in several parts. If it is nil, the size is unlimited.
 
 @end table
@@ -1586,8 +1588,8 @@ that you are silly and have nothing important to say.
 Symbol naming a @sc{mime} charset.  Non-ASCII characters in messages are
 assumed to be encoded using this charset.  The default is @code{nil},
 which means ask the user.  (This variable is used only on non-@sc{mule}
-Emacsen.  
-@xref{Charset Translation, , Charset Translation, emacs-mime, 
+Emacsen.
+@xref{Charset Translation, , Charset Translation, emacs-mime,
       Emacs MIME Manual}, for details on the @sc{mule}-to-@sc{mime}
 translation process.