@syncodeindex fn cp
@syncodeindex vr cp
@syncodeindex pg cp
-@dircategory Emacs
-@direntry
-* Gnus: (gnus). The newsreader Gnus.
-@end direntry
+
@documentencoding ISO-8859-1
-@iftex
-@finalout
-@end iftex
-@setchapternewpage odd
+
+@copying
+Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+ 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end quotation
+@end copying
@iftex
@iflatex
\makeindex
\begin{document}
-\newcommand{\gnusversionname}{Gnus v5.10.6}
+\newcommand{\gnusversionname}{No Gnus v0.3}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
@iftex
@iflatex
+
\begin{titlepage}
{
\thispagestyle{empty}
-Copyright \copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004
-Free Software Foundation, Inc.
-
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
+@c @insertcopying
\newpage
\end{titlepage}
@end iflatex
@end iftex
@ifnottex
+@insertcopying
+@end ifnottex
-This file documents Gnus, the GNU Emacs newsreader.
-
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
- Free Software Foundation, Inc.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being none, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
+@dircategory Emacs
+@direntry
+* Gnus: (gnus). The newsreader Gnus.
+@end direntry
+@iftex
+@finalout
+@end iftex
+@setchapternewpage odd
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-@end ifnottex
-
-@tex
@titlepage
@title Gnus Manual
@author by Lars Magne Ingebrigtsen
@page
-
@vskip 0pt plus 1filll
-Copyright @copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004
- Free Software Foundation, Inc.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-
+@insertcopying
@end titlepage
-@page
-
-@end tex
@node Top
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Gnus v5.10.6.
+This manual corresponds to No Gnus v0.3.
@end ifinfo
@end iftex
@menu
-* Starting Up:: Finding news can be a pain.
-* Group Buffer:: Selecting, subscribing and killing groups.
-* Summary Buffer:: Reading, saving and posting articles.
-* Article Buffer:: Displaying and handling articles.
-* Composing Messages:: Information on sending mail and news.
-* Select Methods:: Gnus reads all messages from various select methods.
-* Scoring:: Assigning values to articles.
-* Various:: General purpose settings.
-* The End:: Farewell and goodbye.
-* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
-* Index:: Variable, function and concept index.
-* Key Index:: Key Index.
+* Starting Up:: Finding news can be a pain.
+* Group Buffer:: Selecting, subscribing and killing groups.
+* Summary Buffer:: Reading, saving and posting articles.
+* Article Buffer:: Displaying and handling articles.
+* Composing Messages:: Information on sending mail and news.
+* Select Methods:: Gnus reads all messages from various select methods.
+* Scoring:: Assigning values to articles.
+* Various:: General purpose settings.
+* The End:: Farewell and goodbye.
+* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
+* Index:: Variable, function and concept index.
+* Key Index:: Key Index.
Other related manuals
-* Message:(message). Composing messages.
-* Emacs-MIME:(emacs-mime). Composing messages; @acronym{MIME}-specific parts.
-* Sieve:(sieve). Managing Sieve scripts in Emacs.
-* PGG:(pgg). @acronym{PGP/MIME} with Gnus.
-* SASL:(sasl). @acronym{SASL} authentication in Emacs.
+* Message:(message). Composing messages.
+* Emacs-MIME:(emacs-mime). Composing messages; @acronym{MIME}-specific parts.
+* Sieve:(sieve). Managing Sieve scripts in Emacs.
+* PGG:(pgg). @acronym{PGP/MIME} with Gnus.
+* SASL:(sasl). @acronym{SASL} authentication in Emacs.
@detailmenu
--- The Detailed Node Listing ---
* Unread Articles:: Marks for unread articles.
* Read Articles:: Marks for read articles.
* Other Marks:: Marks that do not affect readedness.
-
-Marking Articles
-
-* Setting Marks:: How to set and remove marks.
-* Generic Marking Commands:: How to customize the marking.
-* Setting Process Marks:: How to mark articles for later processing.
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
Threading
* IMAP:: Using Gnus as a @acronym{IMAP} client.
* Other Sources:: Reading directories, files, SOUP packets.
* Combined Groups:: Combining groups into one group.
+* Email Based Diary:: Using mails to manage diary events in Gnus.
* Gnus Unplugged:: Reading news and mail offline.
Server Buffer
* Direct Functions:: Connecting directly to the server.
* Indirect Functions:: Connecting indirectly to the server.
* Common Variables:: Understood by several connection functions.
+* NNTP marks:: Storing marks for @acronym{NNTP} servers.
Getting Mail
* Virtual Groups:: Combining articles from many groups.
* Kibozed Groups:: Looking through parts of the newsfeed for articles.
+Email Based Diary
+
+* The NNDiary Back End:: Basic setup and usage.
+* The Gnus Diary Library:: Utility toolkit on top of nndiary.
+* Sending or Not Sending:: A final note on sending diary messages.
+
+The NNDiary Back End
+
+* Diary Messages:: What makes a message valid for nndiary.
+* Running NNDiary:: NNDiary has two modes of operation.
+* Customizing NNDiary:: Bells and whistles.
+
+The Gnus Diary Library
+
+* Diary Summary Line Format:: A nicer summary buffer line format.
+* Diary Articles Sorting:: A nicer way to sort messages.
+* Diary Headers Generation:: Not doing it manually.
+* Diary Group Parameters:: Not handling them manually.
+
Gnus Unplugged
* Agent Basics:: How it all is supposed to work.
Filtering Spam Using The Spam ELisp Package
-* Spam ELisp Package Sequence of Events::
-* Spam ELisp Package Filtering of Incoming Mail::
-* Spam ELisp Package Global Variables::
-* Spam ELisp Package Configuration Examples::
-* Blacklists and Whitelists::
-* BBDB Whitelists::
-* Gmane Spam Reporting::
-* Anti-spam Hashcash Payments::
-* Blackholes::
-* Regular Expressions Header Matching::
-* Bogofilter::
-* SpamAssassin backend::
-* ifile spam filtering::
-* spam-stat spam filtering::
-* SpamOracle::
-* Extending the Spam ELisp package::
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* SpamAssassin back end::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
Filtering Spam Using Statistics with spam-stat
* Red Gnus:: Third time best---Gnus 5.4/5.5.
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
-* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
* No Gnus:: Lars, FIXME!
Customization
terminology section (@pxref{Terminology}).
@menu
-* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
-* The Server is Down:: How can I read my mail then?
-* Slave Gnusae:: You can have more than one Gnus active at a time.
-* Fetching a Group:: Starting Gnus just to read a group.
-* New Groups:: What is Gnus supposed to do with new groups?
-* Changing Servers:: You may want to move from one server to another.
-* Startup Files:: Those pesky startup files---@file{.newsrc}.
-* Auto Save:: Recovering from a crash.
-* The Active File:: Reading the active file over a slow line Takes Time.
-* Startup Variables:: Other variables you might change.
+* Finding the News:: Choosing a method for getting news.
+* The First Time:: What does Gnus do the first time you start it?
+* The Server is Down:: How can I read my mail then?
+* Slave Gnusae:: You can have more than one Gnus active at a time.
+* New Groups:: What is Gnus supposed to do with new groups?
+* Changing Servers:: You may want to move from one server to another.
+* Startup Files:: Those pesky startup files---@file{.newsrc}.
+* Auto Save:: Recovering from a crash.
+* The Active File:: Reading the active file over a slow line Takes Time.
+* Startup Variables:: Other variables you might change.
@end menu
If you can use a local spool, you probably should, as it will almost
certainly be much faster. But do not use the local spool if your
-server is running Leafnode; in this case, use @code{(nntp "localhost")}.
+server is running Leafnode (which is a simple, standalone private news
+server); in this case, use @code{(nntp "localhost")}.
@vindex gnus-nntpserver-file
@cindex NNTPSERVER
(setq gnus-secondary-select-methods '((nnmbox "")))
@end lisp
+Note: the @acronym{NNTP} back end stores marks in marks files
+(@pxref{NNTP marks}). This feature makes it easy to share marks between
+several Gnus installations, but may slow down things a bit when fetching
+new articles. @xref{NNTP marks}, for more information.
+
@node The First Time
@section The First Time
@cindex first time usage
-If no startup files exist, Gnus will try to determine what groups should
-be subscribed by default.
+If no startup files exist (@pxref{Startup Files}), Gnus will try to
+determine what groups should be subscribed by default.
@vindex gnus-default-subscribed-newsgroups
If the variable @code{gnus-default-subscribed-newsgroups} is set, Gnus
incorporated into the slave. If you answer ``no'', the slave may see some
messages as unread that have been read in the master.
-@node Fetching a Group
-@section Fetching a Group
-@cindex fetching a group
-
-@findex gnus-fetch-group
-It is sometimes convenient to be able to just say ``I want to read this
-group and I don't care whether Gnus has been started or not''. This is
-perhaps more useful for people who write code than for users, but the
-command @code{gnus-fetch-group} provides this functionality in any case.
-It takes the group name as a parameter.
@node New Groups
@cindex .newsrc.el
@cindex .newsrc.eld
-Now, you all know about the @file{.newsrc} file. All subscription
-information is traditionally stored in this file.
+Most common Unix news readers use a shared startup file called
+@file{.newsrc}. This file contains all the information about what
+groups are subscribed, and which articles in these groups have been
+read.
Things got a bit more complicated with @sc{gnus}. In addition to
keeping the @file{.newsrc} file updated, it also used a file called
However, this will make it impossible to use other newsreaders than
Gnus. But hey, who would want to, right? Similarly, setting
@code{gnus-read-newsrc-file} to @code{nil} makes Gnus ignore the
-@file{.newsrc} file and any @file{.newsrc-SERVER} files, which is
-convenient if you have a tendency to use Netscape once in a while.
+@file{.newsrc} file and any @file{.newsrc-SERVER} files, which can be
+convenient if you use a different news reader occasionally, and you
+want to read a different subset of the available groups with that
+news reader.
@vindex gnus-save-killed-list
If @code{gnus-save-killed-list} (default @code{t}) is @code{nil}, Gnus
@vindex gnus-init-file
@vindex gnus-site-init-file
When Gnus starts, it will read the @code{gnus-site-init-file}
-(@file{.../site-lisp/gnus} by default) and @code{gnus-init-file}
+(@file{.../site-lisp/gnus-init} by default) and @code{gnus-init-file}
(@file{~/.gnus} by default) files. These are normal Emacs Lisp files
and can be used to avoid cluttering your @file{~/.emacs} and
@file{site-init} files with Gnus stuff. Gnus will also check for files
with the same names as these, but with @file{.elc} and @file{.el}
suffixes. In other words, if you have set @code{gnus-init-file} to
@file{~/.gnus}, it will look for @file{~/.gnus.elc}, @file{~/.gnus.el},
-and finally @file{~/.gnus} (in this order).
-
+and finally @file{~/.gnus} (in this order). If Emacs was invoked with
+the @option{-q} or @option{--no-init-file} options (@pxref{Initial
+Options, ,Initial Options, emacs, The Emacs Manual}), Gnus doesn't read
+@code{gnus-init-file}.
@node Auto Save
Commands}) the following Sieve code is generated:
@example
-if address \"sender\" \"sieve-admin@@extundo.com\" @{
- fileinto \"INBOX.list.sieve\";
+if address "sender" "sieve-admin@@extundo.com" @{
+ fileinto "INBOX.list.sieve";
@}
@end example
+To generate tests for multiple email-addresses use a group parameter
+like @code{(sieve address "sender" ("name@@one.org" else@@two.org"))}.
+When generating a sieve script (@pxref{Sieve Commands}) Sieve code
+like the following is generated:
+
+@example
+if address "sender" ["name@@one.org", "else@@two.org"] @{
+ fileinto "INBOX.list.sieve";
+@}
+@end example
+
+See @pxref{Sieve Commands} for commands and variables that might be of
+interest in relation to the sieve parameter.
+
The Sieve language is described in RFC 3028. @xref{Top, Emacs Sieve,
Top, sieve, Emacs Sieve}.
the group by putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")}
into the group parameters for the group.
-This can also be used as a group-specific hook function. If you want to
+This can also be used as a group-specific hook function. If you want to
hear a beep when you enter a group, you could put something like
@code{(dummy-variable (ding))} in the parameters of that group.
@code{dummy-variable} will be set to the (meaningless) result of the
-@code{(ding)} form.
+@code{(ding)} form.
Alternatively, since the VARIABLE becomes local to the group, this
pattern can be used to temporarily change a hook. For example, if the
@item T M-p
@kindex T M-p (Topic)
@findex gnus-topic-goto-previous-topic
-Go to the next topic (@code{gnus-topic-goto-previous-topic}).
+Go to the previous topic (@code{gnus-topic-goto-previous-topic}).
@item G p
@kindex G p (Topic)
8: comp.binaries.fractals
13: comp.sources.unix
452: alt.sex.emacs
-@end group
+@end group
@end example
The @samp{Emacs} topic has the topic parameter @code{(score-file
@code{From} header, the value of the @code{To} or @code{Newsreader}
headers are used instead.
+To distinguish regular articles from those where the @code{From} field
+has been swapped, a string is prefixed to the @code{To} or
+@code{Newsgroups} header in the summary line. By default the string is
+@samp{-> } for @code{To} and @samp{=> } for @code{Newsgroups}, you can
+customize these strings with @code{gnus-summary-to-prefix} and
+@code{gnus-summary-newsgroup-prefix}.
+
@end enumerate
@vindex nnmail-extra-headers
@item gnus-select-article-hook
@vindex gnus-select-article-hook
-This hook is called whenever an article is selected. By default it
-exposes any threads hidden under the selected article. If you would
-like each article to be saved in the Agent as you read it, putting
-@code{gnus-agent-fetch-selected-article} on this hook will do so.
+This hook is called whenever an article is selected. The default is
+@code{nil}. If you would like each article to be saved in the Agent as
+you read it, putting @code{gnus-agent-fetch-selected-article} on this
+hook will do so.
@item gnus-mark-article-hook
@vindex gnus-mark-article-hook
This hook is called whenever an article is selected. It is intended to
be used for marking articles as read. The default value is
@code{gnus-summary-mark-read-and-unread-as-read}, and will change the
-mark of almost any article you read to @code{gnus-unread-mark}. The
-only articles not affected by this function are ticked, dormant, and
+mark of almost any article you read to @code{gnus-read-mark}. The only
+articles not affected by this function are ticked, dormant, and
expirable articles. If you'd instead like to just have unread articles
marked as read, you can use @code{gnus-summary-mark-unread-as-read}
instead. It will leave marks like @code{gnus-low-score-mark},
In addition, you also have marks that do not affect readedness.
-@menu
-* Unread Articles:: Marks for unread articles.
-* Read Articles:: Marks for read articles.
-* Other Marks:: Marks that do not affect readedness.
-@end menu
-
@ifinfo
-There's a plethora of commands for manipulating these marks:
+There's a plethora of commands for manipulating these marks.
@end ifinfo
@menu
-* Setting Marks:: How to set and remove marks.
-* Generic Marking Commands:: How to customize the marking.
-* Setting Process Marks:: How to mark articles for later processing.
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
@end menu
(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
matching articles.
+@item / R
+@kindex / R (Summary)
+@findex gnus-summary-limit-to-recipient
+Limit the summary buffer to articles that match some recipient
+(@code{gnus-summary-limit-to-recipient}). If given a prefix, exclude
+matching articles.
+
@item / x
@kindex / x (Summary)
@findex gnus-summary-limit-to-extra
@findex gnus-thread-sort-by-score
@findex gnus-thread-sort-by-subject
@findex gnus-thread-sort-by-author
+@findex gnus-thread-sort-by-recipient
@findex gnus-thread-sort-by-number
@findex gnus-thread-sort-by-random
@vindex gnus-thread-sort-functions
By default, sorting is done on article numbers. Ready-made sorting
predicate functions include @code{gnus-thread-sort-by-number},
-@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-subject},
-@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score},
+@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-recipient},
+@code{gnus-thread-sort-by-subject}, @code{gnus-thread-sort-by-date},
+@code{gnus-thread-sort-by-score},
@code{gnus-thread-sort-by-most-recent-number},
@code{gnus-thread-sort-by-most-recent-date},
@code{gnus-thread-sort-by-random} and
@findex gnus-summary-morse-message
Morse decode the article buffer (@code{gnus-summary-morse-message}).
+@item W i
+@kindex W i (Summary)
+@findex gnus-summary-idna-message
+Decode IDNA encoded domain names in the current articles. IDNA
+encoded domain names looks like @samp{xn--bar}. If a string remain
+unencoded after running invoking this, it is likely an invalid IDNA
+string (@samp{xn--bar} is invalid). You must have GNU Libidn
+(@url{http://www.gnu.org/software/libidn/}) installed for this command
+to work.
+
@item W t
@item t
@kindex W t (Summary)
@code{mm-discouraged-alternatives} in @ref{Display Customization,
Display Customization, , emacs-mime, Emacs-Mime Manual}. Images or
other material inside a "multipart/related" part might be overlooked
-when this variable is nil.
+when this variable is @code{nil}.
@vindex gnus-mime-display-multipart-as-mixed
@item gnus-mime-display-multipart-as-mixed
-Display "multipart" parts as "multipart/mixed". If t, it overrides nil
-values of @code{gnus-mime-display-multipart-alternative-as-mixed} and
+Display "multipart" parts as "multipart/mixed". If @code{t}, it
+overrides @code{nil} values of
+@code{gnus-mime-display-multipart-alternative-as-mixed} and
@code{gnus-mime-display-multipart-related-as-mixed}.
@vindex mm-file-name-rewrite-functions
just send out messages without saying what character sets they use. To
help a bit with this, some local news hierarchies have policies that say
what character set is the default. For instance, the @samp{fj}
-hierarchy uses @code{iso-2022-jp-2}.
+hierarchy uses @code{iso-2022-jp}.
@vindex gnus-group-charset-alist
This knowledge is encoded in the @code{gnus-group-charset-alist}
@findex gnus-summary-sort-by-author
Sort by author (@code{gnus-summary-sort-by-author}).
+@item C-c C-s C-t
+@kindex C-c C-s C-t (Summary)
+@findex gnus-summary-sort-by-recipient
+Sort by recipient (@code{gnus-summary-sort-by-recipient}).
+
@item C-c C-s C-s
@kindex C-c C-s C-s (Summary)
@findex gnus-summary-sort-by-subject
@item c (Article)
@kindex c (Article)
Copy the @acronym{MIME} object to a fresh buffer and display this buffer
-(@code{gnus-mime-copy-part}). Compressed files like @file{.gz} and
+(@code{gnus-mime-copy-part}). If given a prefix, copy the raw contents
+without decoding. If given a numerical prefix, you can do semi-manual
+charset stuff (see @code{gnus-summary-show-article-charset-alist} in
+@ref{Paging the Article}). Compressed files like @file{.gz} and
@file{.bz2} are automatically decompressed if
@code{auto-compression-mode} is enabled (@pxref{Compressed Files,,
Accessing Compressed Files, emacs, The Emacs Editor}).
the raw contents without decoding. If given a numerical prefix, you can
do semi-manual charset stuff (see
@code{gnus-summary-show-article-charset-alist} in @ref{Paging the
-Article}).
+Article}). Compressed files like @file{.gz} and @file{.bz2} are
+automatically decompressed depending on @code{jka-compr} regardless of
+@code{auto-compression-mode} (@pxref{Compressed Files,, Accessing
+Compressed Files, emacs, The Emacs Editor}).
@findex gnus-mime-view-part-internally
@item E (Article)
@item gnus-use-idna
This variable controls whether Gnus performs IDNA decoding of
internationalized domain names inside @samp{From}, @samp{To} and
-@samp{Cc} headers. This requires
+@samp{Cc} headers. @xref{IDNA, ,IDNA,message, The Message Manual},
+for how to compose such messages. This requires
@uref{http://www.gnu.org/software/libidn/, GNU Libidn}, and this
variable is only enabled if you have installed it.
said to @dfn{match}.
Each style may contain an arbitrary amount of @dfn{attributes}. Each
-attribute consists of a @code{(@var{name} @var{value})} pair. The
-attribute name can be one of:
+attribute consists of a @code{(@var{name} @var{value})} pair. In
+addition, you can also use the @code{(@var{name} :file @var{value})}
+form or the @code{(@var{name} :value @var{value})} form. Where
+@code{:file} signifies @var{value} represents a file name and its
+contents should be used as the attribute value, @code{:value} signifies
+@var{value} does not represent a file name explicitly. The attribute
+name can be one of:
@itemize @bullet
@item @code{signature}
* IMAP:: Using Gnus as a @acronym{IMAP} client.
* Other Sources:: Reading directories, files, SOUP packets.
* Combined Groups:: Combining groups into one group.
+* Email Based Diary:: Using mails to manage diary events in Gnus.
* Gnus Unplugged:: Reading news and mail offline.
@end menu
* Direct Functions:: Connecting directly to the server.
* Indirect Functions:: Connecting indirectly to the server.
* Common Variables:: Understood by several connection functions.
+* NNTP marks:: Storing marks for @acronym{NNTP} servers.
@end menu
@end table
+@node NNTP marks
+@subsubsection NNTP marks
+@cindex storing NNTP marks
+
+Gnus stores marks (@pxref{Marking Articles}) for @acronym{NNTP}
+servers in marks files. A marks file records what marks you have set
+in a group and each file is specific to the corresponding server.
+Marks files are stored in @file{~/News/marks}
+(@code{nntp-marks-directory}) under a classic hierarchy resembling
+that of a news server, for example marks for the group
+@samp{gmane.discuss} on the news.gmane.org server will be stored in
+the file @file{~/News/marks/news.gmane.org/gmane/discuss/.marks}.
+
+Marks files are useful because you can copy the @file{~/News/marks}
+directory (using rsync, scp or whatever) to another Gnus installation,
+and it will realize what articles you have read and marked. The data
+in @file{~/News/marks} has priority over the same data in
+@file{~/.newsrc.eld}.
+
+Note that marks files are very much server-specific: Gnus remembers
+the article numbers so if you don't use the same servers on both
+installations things are most likely to break (most @acronym{NNTP}
+servers do not use the same article numbers as any other server).
+However, if you use servers A, B, C on one installation and servers A,
+D, E on the other, you can sync the marks files for A and then you'll
+get synchronization for that server between the two installations.
+
+Using @acronym{NNTP} marks can possibly incur a performance penalty so
+if Gnus feels sluggish, try setting the @code{nntp-marks-is-evil}
+variable to @code{t}. Marks will then be stored in @file{~/.newsrc.eld}.
+
+Related variables:
+
+@table @code
+
+@item nntp-marks-is-evil
+@vindex nntp-marks-is-evil
+If non-@code{nil}, this back end will ignore any marks files. The
+default is @code{nil}.
+
+@item nntp-marks-directory
+@vindex nntp-marks-directory
+The directory where marks for nntp groups will be stored.
+
+@end table
+
@node News Spool
@subsection News Spool
("list.\\1" "From:.* \\(.*\\)-list@@majordomo.com")
@end lisp
+@noindent
+In that case, @code{nnmail-split-lowercase-expanded} controls whether
+the inserted text should be made lowercase. @xref{Fancy Mail Splitting}.
+
The second element can also be a function. In that case, it will be
called narrowed to the headers with the first element of the rule as the
argument. It should return a non-@code{nil} value if it thinks that the
mail belongs in that group.
+@cindex @samp{bogus} group
The last of these groups should always be a general one, and the regular
-expression should @emph{always} be @samp{*} so that it matches any mails
+expression should @emph{always} be @samp{""} so that it matches any mails
that haven't been matched by any of the other regexps. (These rules are
-processed from the beginning of the alist toward the end. The first
-rule to make a match will ``win'', unless you have crossposting enabled.
-In that case, all matching rules will ``win''.) When new groups are
-created by splitting mail, you may want to run
-@code{gnus-group-find-new-groups} to see the new groups.
+processed from the beginning of the alist toward the end. The first rule
+to make a match will ``win'', unless you have crossposting enabled. In
+that case, all matching rules will ``win''.) If no rule matched, the mail
+will end up in the @samp{bogus} group. When new groups are created by
+splitting mail, you may want to run @code{gnus-group-find-new-groups} to
+see the new groups. This also applies to the @samp{bogus} group.
If you like to tinker with this yourself, you can set this variable to a
function of your choice. This function will be called without any
The mail back ends all support cross-posting. If several regexps match,
the mail will be ``cross-posted'' to all those groups.
@code{nnmail-crosspost} says whether to use this mechanism or not. Note
-that no articles are crossposted to the general (@samp{*}) group.
+that no articles are crossposted to the general (@samp{""}) group.
@vindex nnmail-crosspost-link-function
@cindex crosspost
By default the splitting codes @acronym{MIME} decodes headers so you
can match on non-@acronym{ASCII} strings. The
@code{nnmail-mail-splitting-charset} variable specifies the default
-charset for decoding. The behaviour can be turned off completely by
+charset for decoding. The behavior can be turned off completely by
binding @code{nnmail-mail-splitting-decodes} to @code{nil}, which is
useful if you want to match articles based on the raw header data.
@end table
+@vindex pop3-movemail
+@vindex pop3-leave-mail-on-server
If the @code{:program} and @code{:function} keywords aren't specified,
-@code{pop3-movemail} will be used.
+@code{pop3-movemail} will be used. If the
+@code{pop3-leave-mail-on-server} is non-@code{nil} the mail is to be
+left on the @acronym{POP} server after fetching when using
+@code{pop3-movemail}. Note that POP servers maintain no state
+information between sessions, so what the client believes is there and
+what is actually there may not match up. If they do not, then the whole
+thing can fall apart and leave you with a corrupt mailbox.
Here are some examples. Fetch from the default @acronym{POP} server,
using the default user name, and default fetcher:
Prefix for file name for storing incoming mail. The default is
@file{Incoming}, in which case files will end up with names like
@file{Incoming30630D_} or @file{Incoming298602ZD}. This is really only
-relevant if @code{mail-source-delete-incoming} is @code{nil}.
+relevant if @code{mail-source-delete-incoming} is @code{nil} or a
+number.
@item mail-source-default-file-modes
@vindex mail-source-default-file-modes
;; @r{the bugs- list, but allow cross-posting when the}
;; @r{message was really cross-posted.}
(any "bugs-mypackage@@somewhere" "mypkg.bugs")
- (any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
+ (any "mypackage@@somewhere" - "bugs-mypackage" "mypkg.list")
;; @r{People@dots{}}
(any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
;; @r{Unmatched mail goes to the catch all group.}
@table @code
-@item group
+@item group
If the split is a string, that will be taken as a group name. Normal
regexp match expansion will be done. See below for examples.
The buffer is narrowed to the message in question when @var{function}
is run. That's why @code{(widen)} needs to be called after
@code{save-excursion} and @code{save-restriction} in the example
-above. Also note that with the nnimap backend, message bodies will
+above. Also note that with the nnimap back end, message bodies will
not be downloaded by default. You need to set
@code{nnimap-split-download-body} to @code{t} to do that
(@pxref{Splitting in IMAP}).
up to @samp{\\9} will be substituted with the text matched by the
groupings 1 through 9.
+@vindex nnmail-split-lowercase-expanded
+Where @code{nnmail-split-lowercase-expanded} controls whether the
+lowercase of the matched string should be used for the substitution.
+Setting it as non-@code{nil} is useful to avoid the creation of multiple
+groups when users send to an address using different case
+(i.e. mailing-list@@domain vs Mailing-List@@Domain). The default value
+is @code{t}.
+
@vindex nnmail-split-fancy-match-partial-words
@code{nnmail-split-fancy-match-partial-words} controls whether partial
words are matched during fancy splitting.
In this example, messages sent from @samp{joedavis@@foo.org} will
normally not be filed in @samp{joemail}. With
-@code{nnmail-split-fancy-match-partial-words} set to t, however, the
-match will happen. In effect, the requirement of a word boundary is
-removed and instead the match becomes more like a grep.
+@code{nnmail-split-fancy-match-partial-words} set to @code{t},
+however, the match will happen. In effect, the requirement of a word
+boundary is removed and instead the match becomes more like a grep.
@findex nnmail-split-fancy-with-parent
@code{nnmail-split-fancy-with-parent} is a function which allows you to
@item nnml-use-compressed-files
@vindex nnml-use-compressed-files
If non-@code{nil}, @code{nnml} will allow using compressed message
-files.
+files. This variable requires @code{auto-compression-mode} to be
+enabled (@pxref{Compressed Files, ,Compressed Files, emacs, The Emacs
+Manual})
+
+@item nnml-compressed-files-size-threshold
+@vindex nnml-compressed-files-size-threshold
+Default size threshold for compressed message files. Message files with
+bodies larger than that many characters will be automatically compressed
+if @code{nnml-use-compressed-files} is non-nil.
@end table
@acronym{RSS} has a quite regular and nice interface, and it's
possible to get the information Gnus needs to keep groups updated.
+Note: you had better use Emacs which supports the @code{utf-8} coding
+system because @acronym{RSS} uses UTF-8 for encoding non-@acronym{ASCII}
+text by default. It is also used by default for non-@acronym{ASCII}
+group names.
+
@kindex G R (Summary)
-Use @kbd{G R} from the summary buffer to subscribe to a feed---you
-will be prompted for the location of the feed.
+Use @kbd{G R} from the summary buffer to subscribe to a feed---you will
+be prompted for the location, the title and the description of the feed.
+The title, which allows any characters, will be used for the group name
+and the name of the group data file. The description can be omitted.
An easy way to get started with @code{nnrss} is to say something like
-the following in the group buffer: @kbd{B nnrss RET y}, then
+the following in the group buffer: @kbd{B nnrss RET RET y}, then
subscribe to groups.
+The @code{nnrss} back end saves the group data file in
+@code{nnrss-directory} (see below) for each @code{nnrss} group. File
+names containing non-@acronym{ASCII} characters will be encoded by the
+coding system specified with the @code{nnmail-pathname-coding-system}
+variable. If it is @code{nil}, in Emacs the coding system defaults to
+the value of @code{default-file-name-coding-system}. If you are using
+XEmacs and want to use non-@acronym{ASCII} group names, you should set
+the value for the @code{nnmail-pathname-coding-system} variable properly.
+
@cindex OPML
You can also use the following commands to import and export your
subscriptions from a file in @acronym{OPML} format (Outline Processor
The directory where @code{nnrss} stores its files. The default is
@file{~/News/rss/}.
+@item nnrss-file-coding-system
+@vindex nnrss-file-coding-system
+The coding system used when reading and writing the @code{nnrss} groups
+data files. The default is the value of
+@code{mm-universal-coding-system} (which defaults to @code{emacs-mule}
+in Emacs or @code{escape-quoted} in XEmacs).
+
@item nnrss-use-local
@vindex nnrss-use-local
@findex nnrss-generate-download-script
A file containing credentials used to log in on servers. The format is
(almost) the same as the @code{ftp} @file{~/.netrc} file. See the
variable @code{nntp-authinfo-file} for exact syntax; also see
-@ref{NNTP}.
+@ref{NNTP}. An example of an .authinfo line for an IMAP server, is:
+
+@example
+machine students.uio.no login larsi password geheimnis port imap
+@end example
+
+Note that it should be @code{port imap}, or @code{port 143}, if you
+use a @code{nnimap-stream} of @code{tls} or @code{ssl}, even if the
+actual port number used is port 993 for secured IMAP. For
+convenience, Gnus will accept @code{port imaps} as a synonym of
+@code{port imap}.
@item nnimap-need-unselect-to-notice-new-mail
@vindex nnimap-need-unselect-to-notice-new-mail
Set to non-@code{nil} to download entire articles during splitting.
This is generally not required, and will slow things down
considerably. You may need it if you want to use an advanced
-splitting function that analyses the body to split the article.
+splitting function that analyzes the body to split the article.
@end table
@acronym{IMAP} is a complex protocol, more so than @acronym{NNTP} or
@acronym{POP3}. Implementation bugs are not unlikely, and we do our
-best to fix them right away. If you encounter odd behaviour, chances
+best to fix them right away. If you encounter odd behavior, chances
are that either the server or Gnus is buggy.
If you are familiar with network protocols in general, you will
@vindex imap-log
Because the protocol dump, when enabled, generates lots of data, it is
disabled by default. You can enable it by setting @code{imap-log} as
-follows:
+follows:
@lisp
(setq imap-log t)
their @acronym{NOV} lines removed from the @acronym{NOV} file.
+@node Email Based Diary
+@section Email Based Diary
+@cindex diary
+@cindex email based diary
+@cindex calendar
+
+This section describes a special mail back end called @code{nndiary},
+and its companion library @code{gnus-diary}. It is ``special'' in the
+sense that it is not meant to be one of the standard alternatives for
+reading mail with Gnus. See @ref{Choosing a Mail Back End} for that.
+Instead, it is used to treat @emph{some} of your mails in a special way,
+namely, as event reminders.
+
+Here is a typical scenario:
+
+@itemize @bullet
+@item
+You've got a date with Andy Mc Dowell or Bruce Willis (select according
+to your sexual preference) in one month. You don't want to forget it.
+@item
+So you send a ``reminder'' message (actually, a diary one) to yourself.
+@item
+You forget all about it and keep on getting and reading new mail, as usual.
+@item
+From time to time, as you type `g' in the group buffer and as the date
+is getting closer, the message will pop up again to remind you of your
+appointment, just as if it were new and unread.
+@item
+Read your ``new'' messages, this one included, and start dreaming again
+of the night you're gonna have.
+@item
+Once the date is over (you actually fell asleep just after dinner), the
+message will be automatically deleted if it is marked as expirable.
+@end itemize
+
+The Gnus Diary back end has the ability to handle regular appointments
+(that wouldn't ever be deleted) as well as punctual ones, operates as a
+real mail back end and is configurable in many ways. All of this is
+explained in the sections below.
+
+@menu
+* The NNDiary Back End:: Basic setup and usage.
+* The Gnus Diary Library:: Utility toolkit on top of nndiary.
+* Sending or Not Sending:: A final note on sending diary messages.
+@end menu
+
+
+@node The NNDiary Back End
+@subsection The NNDiary Back End
+@cindex nndiary
+@cindex the nndiary back end
+
+@code{nndiary} is a back end very similar to @code{nnml} (@pxref{Mail
+Spool}). Actually, it could appear as a mix of @code{nnml} and
+@code{nndraft}. If you know @code{nnml}, you're already familiar with
+the message storing scheme of @code{nndiary}: one file per message, one
+directory per group.
+
+ Before anything, there is one requirement to be able to run
+@code{nndiary} properly: you @emph{must} use the group timestamp feature
+of Gnus. This adds a timestamp to each group's parameters. @ref{Group
+Timestamp} to see how it's done.
+
+@menu
+* Diary Messages:: What makes a message valid for nndiary.
+* Running NNDiary:: NNDiary has two modes of operation.
+* Customizing NNDiary:: Bells and whistles.
+@end menu
+
+@node Diary Messages
+@subsubsection Diary Messages
+@cindex nndiary messages
+@cindex nndiary mails
+
+@code{nndiary} messages are just normal ones, except for the mandatory
+presence of 7 special headers. These headers are of the form
+@code{X-Diary-<something>}, @code{<something>} being one of
+@code{Minute}, @code{Hour}, @code{Dom}, @code{Month}, @code{Year},
+@code{Time-Zone} and @code{Dow}. @code{Dom} means ``Day of Month'', and
+@code{dow} means ``Day of Week''. These headers actually behave like
+crontab specifications and define the event date(s):
+
+@itemize @bullet
+@item
+For all headers except the @code{Time-Zone} one, a header value is
+either a star (meaning all possible values), or a list of fields
+(separated by a comma).
+@item
+A field is either an integer, or a range.
+@item
+A range is two integers separated by a dash.
+@item
+Possible integer values are 0--59 for @code{Minute}, 0--23 for
+@code{Hour}, 1--31 for @code{Dom}, 1--12 for @code{Month}, above 1971
+for @code{Year} and 0--6 for @code{Dow} (0 meaning Sunday).
+@item
+As a special case, a star in either @code{Dom} or @code{Dow} doesn't
+mean ``all possible values'', but ``use only the other field''. Note
+that if both are star'ed, the use of either one gives the same result.
+@item
+The @code{Time-Zone} header is special in that it can only have one
+value (@code{GMT}, for instance). A star doesn't mean ``all possible
+values'' (because it makes no sense), but ``the current local time
+zone''. Most of the time, you'll be using a star here. However, for a
+list of available time zone values, see the variable
+@code{nndiary-headers}.
+@end itemize
+
+As a concrete example, here are the diary headers to add to your message
+for specifying ``Each Monday and each 1st of month, at 12:00, 20:00,
+21:00, 22:00, 23:00 and 24:00, from 1999 to 2010'' (I'll let you find
+what to do then):
+
+@example
+X-Diary-Minute: 0
+X-Diary-Hour: 12, 20-24
+X-Diary-Dom: 1
+X-Diary-Month: *
+X-Diary-Year: 1999-2010
+X-Diary-Dow: 1
+X-Diary-Time-Zone: *
+@end example
+
+@node Running NNDiary
+@subsubsection Running NNDiary
+@cindex running nndiary
+@cindex nndiary operation modes
+
+@code{nndiary} has two modes of operation: ``traditional'' (the default)
+and ``autonomous''. In traditional mode, @code{nndiary} does not get new
+mail by itself. You have to move (@kbd{B m}) or copy (@kbd{B c}) mails
+from your primary mail back end to nndiary groups in order to handle them
+as diary messages. In autonomous mode, @code{nndiary} retrieves its own
+mail and handles it independently from your primary mail back end.
+
+One should note that Gnus is not inherently designed to allow several
+``master'' mail back ends at the same time. However, this does make
+sense with @code{nndiary}: you really want to send and receive diary
+messages to your diary groups directly. So, @code{nndiary} supports
+being sort of a ``second primary mail back end'' (to my knowledge, it is
+the only back end offering this feature). However, there is a limitation
+(which I hope to fix some day): respooling doesn't work in autonomous
+mode.
+
+In order to use @code{nndiary} in autonomous mode, you have several
+things to do:
+
+@itemize @bullet
+@item
+Allow @code{nndiary} to retrieve new mail by itself. Put the following
+line in your @file{gnusrc} file:
+
+@lisp
+(setq nndiary-get-new-mail t)
+@end lisp
+@item
+You must arrange for diary messages (those containing @code{X-Diary-*}
+headers) to be split in a private folder @emph{before} Gnus treat them.
+Again, this is needed because Gnus cannot (yet ?) properly handle
+multiple primary mail back ends. Getting those messages from a separate
+source will compensate this misfeature to some extent.
+
+As an example, here's my procmailrc entry to store diary files in
+@file{~/.nndiary} (the default @code{nndiary} mail source file):
+
+@example
+:0 HD :
+* ^X-Diary
+.nndiary
+@end example
+@end itemize
+
+Once this is done, you might want to customize the following two options
+that affect the diary mail retrieval and splitting processes:
+
+@defvar nndiary-mail-sources
+This is the diary-specific replacement for the standard
+@code{mail-sources} variable. It obeys the same syntax, and defaults to
+@code{(file :path "~/.nndiary")}.
+@end defvar
+
+@defvar nndiary-split-methods
+This is the diary-specific replacement for the standard
+@code{nnmail-split-methods} variable. It obeys the same syntax.
+@end defvar
+
+ Finally, you may add a permanent @code{nndiary} virtual server
+(something like @code{(nndiary "diary")} should do) to your
+@code{gnus-secondary-select-methods}.
+
+ Hopefully, almost everything (see the TODO section in
+@file{nndiary.el}) will work as expected when you restart Gnus: in
+autonomous mode, typing @kbd{g} and @kbd{M-g} in the group buffer, will
+also get your new diary mails and split them according to your
+diary-specific rules, @kbd{F} will find your new diary groups etc.
+
+@node Customizing NNDiary
+@subsubsection Customizing NNDiary
+@cindex customizing nndiary
+@cindex nndiary customization
+
+Now that @code{nndiary} is up and running, it's time to customize it.
+The custom group is called @code{nndiary} (no, really ?!). You should
+browse it to figure out which options you'd like to tweak. The following
+two variables are probably the only ones you will want to change:
+
+@defvar nndiary-reminders
+This is the list of times when you want to be reminded of your
+appointements (e.g. 3 weeks before, then 2 days before, then 1 hour
+before and that's it). Remember that ``being reminded'' means that the
+diary message will pop up as brand new and unread again when you get new
+mail.
+@end defvar
+
+@defvar nndiary-week-starts-on-monday
+Rather self-explanatory. Otherwise, Sunday is assumed (this is the
+default).
+@end defvar
+
+
+@node The Gnus Diary Library
+@subsection The Gnus Diary Library
+@cindex gnus-diary
+@cindex the gnus diary library
+
+Using @code{nndiary} manually (I mean, writing the headers by hand and
+so on) would be rather boring. Fortunately, there is a library called
+@code{gnus-diary} written on top of @code{nndiary}, that does many
+useful things for you.
+
+ In order to use it, add the following line to your @file{gnusrc} file:
+
+@lisp
+(require 'gnus-diary)
+@end lisp
+
+ Also, you shouldn't use any @code{gnus-user-format-function-[d|D]}
+(@pxref{Summary Buffer Lines}). @code{gnus-diary} provides both of these
+(sorry if you used them before).
+
+
+@menu
+* Diary Summary Line Format:: A nicer summary buffer line format.
+* Diary Articles Sorting:: A nicer way to sort messages.
+* Diary Headers Generation:: Not doing it manually.
+* Diary Group Parameters:: Not handling them manually.
+@end menu
+
+@node Diary Summary Line Format
+@subsubsection Diary Summary Line Format
+@cindex diary summary buffer line
+@cindex diary summary line format
+
+Displaying diary messages in standard summary line format (usually
+something like @samp{From Joe: Subject}) is pretty useless. Most of
+the time, you're the one who wrote the message, and you mostly want to
+see the event's date.
+
+ @code{gnus-diary} provides two supplemental user formats to be used in
+summary line formats. @code{D} corresponds to a formatted time string
+for the next occurrence of the event (e.g. ``Sat, Sep 22 01, 12:00''),
+while @code{d} corresponds to an approximative remaining time until the
+next occurrence of the event (e.g. ``in 6 months, 1 week'').
+
+ For example, here's how Joe's birthday is displayed in my
+@code{nndiary+diary:birthdays} summary buffer (note that the message is
+expirable, but will never be deleted, as it specifies a periodic event):
+
+@example
+ E Sat, Sep 22 01, 12:00: Joe's birthday (in 6 months, 1 week)
+@end example
+
+In order to get something like the above, you would normally add the
+following line to your diary groups'parameters:
+
+@lisp
+(gnus-summary-line-format "%U%R%z %uD: %(%s%) (%ud)\n")
+@end lisp
+
+However, @code{gnus-diary} does it automatically (@pxref{Diary Group
+Parameters}). You can however customize the provided summary line format
+with the following user options:
+
+@defvar gnus-diary-summary-line-format
+Defines the summary line format used for diary groups (@pxref{Summary
+Buffer Lines}). @code{gnus-diary} uses it to automatically update the
+diary groups'parameters.
+@end defvar
+
+@defvar gnus-diary-time-format
+Defines the format to display dates in diary summary buffers. This is
+used by the @code{D} user format. See the docstring for details.
+@end defvar
+
+@defvar gnus-diary-delay-format-function
+Defines the format function to use for displaying delays (remaining
+times) in diary summary buffers. This is used by the @code{d} user
+format. There are currently built-in functions for English and French;
+you can also define your own. See the docstring for details.
+@end defvar
+
+@node Diary Articles Sorting
+@subsubsection Diary Articles Sorting
+@cindex diary articles sorting
+@cindex diary summary lines sorting
+@findex gnus-summary-sort-by-schedule
+@findex gnus-thread-sort-by-schedule
+@findex gnus-article-sort-by-schedule
+
+@code{gnus-diary} provides new sorting functions (@pxref{Sorting the
+Summary Buffer} ) called @code{gnus-summary-sort-by-schedule},
+@code{gnus-thread-sort-by-schedule} and
+@code{gnus-article-sort-by-schedule}. These functions let you organize
+your diary summary buffers from the closest event to the farthest one.
+
+@code{gnus-diary} automatically installs
+@code{gnus-summary-sort-by-schedule} as a menu item in the summary
+buffer's ``sort'' menu, and the two others as the primary (hence
+default) sorting functions in the group parameters (@pxref{Diary Group
+Parameters}).
+
+@node Diary Headers Generation
+@subsubsection Diary Headers Generation
+@cindex diary headers generation
+@findex gnus-diary-check-message
+
+@code{gnus-diary} provides a function called
+@code{gnus-diary-check-message} to help you handle the @code{X-Diary-*}
+headers. This function ensures that the current message contains all the
+required diary headers, and prompts you for values or corrections if
+needed.
+
+ This function is hooked into the @code{nndiary} back end, so that
+moving or copying an article to a diary group will trigger it
+automatically. It is also bound to @kbd{C-c D c} in @code{message-mode}
+and @code{article-edit-mode} in order to ease the process of converting
+a usual mail to a diary one.
+
+ This function takes a prefix argument which will force prompting of
+all diary headers, regardless of their presence or validity. That way,
+you can very easily reschedule an already valid diary message, for
+instance.
+
+@node Diary Group Parameters
+@subsubsection Diary Group Parameters
+@cindex diary group parameters
+
+When you create a new diary group, or visit one, @code{gnus-diary}
+automatically checks your group parameters and if needed, sets the
+summary line format to the diary-specific value, installs the
+diary-specific sorting functions, and also adds the different
+@code{X-Diary-*} headers to the group's posting-style. It is then easier
+to send a diary message, because if you use @kbd{C-u a} or @kbd{C-u m}
+on a diary group to prepare a message, these headers will be inserted
+automatically (although not filled with proper values yet).
+
+@node Sending or Not Sending
+@subsection Sending or Not Sending
+
+Well, assuming you've read of of the above, here are two final notes on
+mail sending with @code{nndiary}:
+
+@itemize @bullet
+@item
+@code{nndiary} is a @emph{real} mail back end. You really send real diary
+messsages for real. This means for instance that you can give
+appointements to anybody (provided they use Gnus and @code{nndiary}) by
+sending the diary message to them as well.
+@item
+However, since @code{nndiary} also has a @code{request-post} method, you
+can also use @kbd{C-u a} instead of @kbd{C-u m} on a diary group and the
+message won't actually be sent; just stored locally in the group. This
+comes in very handy for private appointments.
+@end itemize
+
@node Gnus Unplugged
@section Gnus Unplugged
@cindex offline
While it may be obvious to all, the only headers and articles
available while unplugged are those headers and articles that were
fetched into the Agent while previously plugged. To put it another
-way, "If you forget to fetch something while plugged, you might have a
-less than satisfying unplugged session". For this reason, the Agent
+way, ``If you forget to fetch something while plugged, you might have a
+less than satisfying unplugged session''. For this reason, the Agent
adds two visual effects to your summary buffer. These effects display
the download status of each article so that you always know which
articles will be available when unplugged.
If you would like to use the undownloaded faces, you must enable the
undownloaded faces by setting the @code{agent-enable-undownloaded-faces}
-group parameter to t. This parameter, like all other agent
-parameters, may be set on an Agent Category (@pxref{Agent
-Categories}), a Group Topic (@pxref{Topic Parameters}), or an
-individual group (@pxref{Group Parameters}).
+group parameter to @code{t}. This parameter, like all other agent
+parameters, may be set on an Agent Category (@pxref{Agent Categories}),
+a Group Topic (@pxref{Topic Parameters}), or an individual group
+(@pxref{Group Parameters}).
The one problem common to all users using the agent is how quickly it
can consume disk space. If you using the agent on many groups, it is
@vindex gnus-agent
Is the agent enabled? The default is @code{t}. When first enabled,
the agent will use @code{gnus-agent-auto-agentize-methods} to
-automatically mark some backends as agentized. You may change which
-backends are agentized using the agent commands in the server buffer.
+automatically mark some back ends as agentized. You may change which
+back ends are agentized using the agent commands in the server buffer.
To enter the server buffer, use the @kbd{^}
(@code{gnus-group-enter-server-mode}) command in the group buffer.
If @code{gnus-agent-mark-unread-after-downloaded} is non-@code{nil},
mark articles as unread after downloading. This is usually a safe
thing to do as the newly downloaded article has obviously not been
-read. The default is t.
+read. The default is @code{t}.
@item gnus-agent-consider-all-articles
@vindex gnus-agent-consider-all-articles
buffer how to maneuver around undownloaded (only headers stored in the
agent) and unfetched (neither article nor headers stored) articles.
-The legal values are @code{nil} (maneuver to any article),
+The valid values are @code{nil} (maneuver to any article),
@code{undownloaded} (maneuvering while unplugged ignores articles that
have not been fetched), @code{always-undownloaded} (maneuvering always
ignores articles that have not been fetched), @code{unfetched}
If you have never used the Agent before (or more technically, if
@file{~/News/agent/lib/servers} does not exist), Gnus will
automatically agentize a few servers for you. This variable control
-which backends should be auto-agentized. It is typically only useful
-to agentize remote backends. The auto-agentizing has the same effect
+which back ends should be auto-agentized. It is typically only useful
+to agentize remote back ends. The auto-agentizing has the same effect
as running @kbd{J a} on the servers (@pxref{Server Agent Commands}).
If the file exist, you must manage the servers manually by adding or
removing them, this variable is only applicable the first time you
@table @dfn
@item If I read an article while plugged, do they get entered into the Agent?
-@strong{No}. If you want this behaviour, add
+@strong{No}. If you want this behavior, add
@code{gnus-agent-fetch-selected-article} to
@code{gnus-select-article-hook}.
group name with @code{gnus-adaptive-file-suffix} appended. The default
is @file{ADAPT}.
+@vindex gnus-adaptive-pretty-print
+Adaptive score files can get huge and are not meant to be edited by
+human hands. If @code{gnus-adaptive-pretty-print} is @code{nil} (the
+deafult) those files will not be written in a human readable way.
+
@vindex gnus-score-exact-adapt-limit
When doing adaptive scoring, substring or fuzzy matching would probably
give you the best results in most cases. However, if the header one
1000)
@end example
-The possibilities are endless.
+Suppose you're readin ga high volume group and you're only interested
+in replies. The plan is to score down all articles that don't have
+subject that begin with "Re:", "Fw:" or "Fwd:" and then score up all
+parents of articles that have subjects that begin with reply marks.
+
+@example
+((! ("subject" "re:\\|fwd?:" r))
+ -200)
+((1- ("subject" "re:\\|fwd?:" r))
+ 200)
+@end example
+The possibilities are endless.
@node Advanced Scoring Tips
@subsection Advanced Scoring Tips
...
@end example
-Then that means "score on the from header of the grandparent of the
-current article". An indirection is quite fast, but it's better to say:
+Then that means ``score on the from header of the grandparent of the
+current article''. An indirection is quite fast, but it's better to say:
@example
(1-
When score files are loaded and @code{gnus-decay-scores} is
non-@code{nil}, Gnus will run the score files through the decaying
mechanism thereby lowering the scores of all non-permanent score rules.
-The decay itself if performed by the @code{gnus-decay-score-function}
-function, which is @code{gnus-decay-score} by default. Here's the
-definition of that function:
+If @code{gnus-decay-scores} is a regexp, only score files matching this
+regexp are treated. E.g. you may set it to @samp{\\.ADAPT\\'} if only
+@emph{adaptive} score files should be decayed. The decay itself if
+performed by the @code{gnus-decay-score-function} function, which is
+@code{gnus-decay-score} by default. Here's the definition of that
+function:
@lisp
(defun gnus-decay-score (score)
* Undo:: Some actions can be undone.
* Predicate Specifiers:: Specifying predicates.
* Moderation:: What to do if you're a moderator.
+* Fetching a Group:: Starting Gnus just to read a group.
* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
* Fuzzy Matching:: What's the big fuzz?
* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
Gnus usually moves point to a pre-defined place on each line in most
buffers. By default, point move to the first colon character on the
-line. You can customize this behaviour in three different ways.
+line. You can customize this behavior in three different ways.
You can move the colon character to somewhere else on the line.
@item gnus-nocem-verifyer
@vindex gnus-nocem-verifyer
-@findex mc-verify
+@findex pgg-verify
This should be a function for verifying that the NoCeM issuer is who she
-says she is. The default is @code{mc-verify}, which is a Mailcrypt
-function. If this is too slow and you don't care for verification
-(which may be dangerous), you can set this variable to @code{nil}.
-
-If you want signed NoCeM messages to be verified and unsigned messages
-not to be verified (but used anyway), you could do something like:
-
-@lisp
-(setq gnus-nocem-verifyer 'my-gnus-mc-verify)
-
-(defun my-gnus-mc-verify ()
- (not (eq 'forged
- (ignore-errors
- (if (mc-verify)
- t
- 'forged)))))
-@end lisp
+says she is. The default is @code{pgg-verify}, which returns
+non-@code{nil} if the verification is successful, otherwise (including
+the case the NoCeM message was not signed) returns @code{nil}. If this
+is too slow and you don't care for verification (which may be dangerous),
+you can set this variable to @code{nil}.
-This might be dangerous, though.
+Formerly the default was @code{mc-verify}, which is a Mailcrypt
+function. While you can still use it, you can change it into
+@code{pgg-verify} running with GnuPG if you are willing to add the
+@acronym{PGP} public keys to GnuPG's keyring.
@item gnus-nocem-directory
@vindex gnus-nocem-directory
@end lisp
+@node Fetching a Group
+@section Fetching a Group
+@cindex fetching a group
+
+@findex gnus-fetch-group
+It is sometimes convenient to be able to just say ``I want to read this
+group and I don't care whether Gnus has been started or not''. This is
+perhaps more useful for people who write code than for users, but the
+command @code{gnus-fetch-group} provides this functionality in any case.
+It takes the group name as a parameter.
+
+
@node Image Enhancements
@section Image Enhancements
@end iftex
@c @anchor{X-Face}
-Gnus now uses the internal ELisp-based @code{uncompface} program for
-decoding an @code{X-Face} header normally in Emacs. While it doesn't
-require any other external program, you may feel it is slow if you are
-using a slow machine. In such a case, you can modify the following
-variables:
-
-@table @code
-@item uncompface-use-external
-@vindex uncompface-use-external
-Specify which of the internal or the external decoder should be used.
-@code{nil} means to use the internal ELisp-based @code{uncompface}
-program. @code{t} means to use the external decoder. The default value
-is normally @code{undecided} which means to determine it by checking
-whether the host machine is slow, being controlled by
-@code{uncompface-use-external-threshold} (which see).
-
-@item uncompface-use-external-threshold
-@vindex uncompface-use-external-threshold
-A number of seconds to check whether the host machine is slow. If the
-host takes time larger than this value for decoding an @code{X-Face}
-using the internal ELisp-based @code{uncompface} program, it will be
-changed to using the external decoder. The default is 0.1 seconds.
-@end table
-
-If the internal decoder is invalidated or if you are using XEmacs,
-decoding an @code{X-Face} header either requires an Emacs that has
+Decoding an @code{X-Face} header either requires an Emacs that has
@samp{compface} support (which most XEmacs versions has), or that you
have @samp{compface} installed on your system. If either is true,
Gnus will default to displaying @code{X-Face} headers.
@code{gnus-picon-databases} points to the directory containing the
Picons databases.
+@vindex gnus-picon-style
+The variable @code{gnus-picon-style} controls how picons are displayed.
+If @code{inline}, the textual representation is replaced. If
+@code{right}, picons are added right to the textual representation.
+
The following variables offer control over where things are located.
@table @code
@samp{vmadmin.com}. If you get 200 messages about @samp{VIAGRA}, you
discard all messages with @samp{VIAGRA} in the message. If you get
lots of spam from Bulgaria, for example, you try to filter all mail
-from Bulgarian IPs.
+from Bulgarian IPs.
This, unfortunately, is a great way to discard legitimate e-mail. The
risks of blocking a whole country (Bulgaria, Norway, Nigeria, China,
"spam"))))
@end lisp
-Note that with the nnimap backend, message bodies will not be
+Note that with the nnimap back end, message bodies will not be
downloaded by default. You need to set
@code{nnimap-split-download-body} to @code{t} to do that
(@pxref{Splitting in IMAP}).
@cindex hashcash
A novel technique to fight spam is to require senders to do something
-costly for each message they send. This has the obvious drawback that
-you cannot rely on everyone in the world using this technique,
-since it is not part of the Internet standards, but it may be useful
-in smaller communities.
+costly and demonstrably unique for each message they send. This has
+the obvious drawback that you cannot rely on everyone in the world
+using this technique, since it is not part of the Internet standards,
+but it may be useful in smaller communities.
While the tools in the previous section work well in practice, they
work only because the tools are constantly maintained and updated as
@cindex X-Hashcash
The ``something costly'' is to burn CPU time, more specifically to
compute a hash collision up to a certain number of bits. The
-resulting hashcash cookie is inserted in a @samp{X-Hashcash:}
-header. For more details, and for the external application
-@code{hashcash} you need to install to use this feature, see
-@uref{http://www.cypherspace.org/~adam/hashcash/}. Even more
-information can be found at @uref{http://www.camram.org/}.
+resulting hashcash cookie is inserted in a @samp{X-Hashcash:} header.
+For more details, and for the external application @code{hashcash} you
+need to install to use this feature, see
+@uref{http://www.hashcash.org/}. Even more information can be found
+at @uref{http://www.camram.org/}.
-If you wish to call hashcash for each message you send, say something
-like:
+If you wish to generate hashcash for each message you send, you can
+customize @code{message-generate-hashcash} (@pxref{Mail Headers, ,Mail
+Headers,message, The Message Manual}), as in:
@lisp
-(require 'hashcash)
-(add-hook 'message-send-hook 'mail-add-payment)
+(setq message-generate-hashcash t)
@end lisp
-The @file{hashcash.el} library can be found in the Gnus development
-contrib directory or at
-@uref{http://users.actrix.gen.nz/mycroft/hashcash.el}.
-
You will need to set up some additional variables as well:
@table @code
@item hashcash-default-payment
@vindex hashcash-default-payment
This variable indicates the default number of bits the hash collision
-should consist of. By default this is 0, meaning nothing will be
-done. Suggested useful values include 17 to 29.
+should consist of. By default this is 20. Suggested useful values
+include 17 to 29.
@item hashcash-payment-alist
@vindex hashcash-payment-alist
@var{amount})} cells, where the @var{string} is the string to use
(normally the email address or newsgroup name is used).
-@item hashcash
-@vindex hashcash
-Where the @code{hashcash} binary is installed.
+@item hashcash-path
+@vindex hashcash-path
+Where the @code{hashcash} binary is installed. This variable should
+be automatically set by @code{executable-find}, but if it's @code{nil}
+(usually because the @code{hashcash} binary is not in your path)
+you'll get a warning when you check hashcash payments and an error
+when you generate hashcash payments.
@end table
-Currently there is no built in functionality in Gnus to verify
-hashcash cookies, it is expected that this is performed by your hand
-customized mail filtering scripts. Improvements in this area would be
-a useful contribution, however.
+Gnus can verify hashcash cookies, although this can also be done by
+hand customized mail filtering scripts. To verify a hashcash cookie
+in a message, use the @code{mail-check-payment} function in the
+@code{hashcash.el} library. You can also use the @code{spam.el}
+package with the @code{spam-use-hashcash} back end to validate hashcash
+cookies in incoming mail and filter mail accordingly (@pxref{Anti-spam
+Hashcash Payments}).
@node Filtering Spam Using The Spam ELisp Package
@subsection Filtering Spam Using The Spam ELisp Package
@cindex spam filtering
@cindex spam
-The idea behind @file{spam.el} is to have a control center for spam detection
-and filtering in Gnus. To that end, @file{spam.el} does two things: it
+The idea behind @code{spam.el} is to have a control center for spam detection
+and filtering in Gnus. To that end, @code{spam.el} does two things: it
filters new mail, and it analyzes mail known to be spam or ham.
-@dfn{Ham} is the name used throughout @file{spam.el} to indicate
+@dfn{Ham} is the name used throughout @code{spam.el} to indicate
non-spam messages.
-First of all, you @strong{must} run the function
-@code{spam-initialize} to autoload @code{spam.el} and to install the
+Make sure you read the section on the @code{spam.el} sequence of
+events. See @xref{Spam ELisp Package Sequence of Events}.
+
+@cindex spam-initialize
+To use @code{spam.el}, you @strong{must} run the function
+@code{spam-initialize} to autoload @file{spam.el} and to install the
@code{spam.el} hooks. There is one exception: if you use the
@code{spam-use-stat} (@pxref{spam-stat spam filtering}) setting, you
should turn it on before @code{spam-initialize}:
group.
@menu
-* Spam ELisp Package Sequence of Events::
-* Spam ELisp Package Filtering of Incoming Mail::
-* Spam ELisp Package Global Variables::
-* Spam ELisp Package Configuration Examples::
-* Blacklists and Whitelists::
-* BBDB Whitelists::
-* Gmane Spam Reporting::
-* Anti-spam Hashcash Payments::
-* Blackholes::
-* Regular Expressions Header Matching::
-* Bogofilter::
-* SpamAssassin backend::
-* ifile spam filtering::
-* spam-stat spam filtering::
-* SpamOracle::
-* Extending the Spam ELisp package::
-@end menu
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Sorting and Score Display in Summary Buffer::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* SpamAssassin back end::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
+@end menu
@node Spam ELisp Package Sequence of Events
@subsubsection Spam ELisp Package Sequence of Events
@cindex spam filtering
@cindex spam filtering sequence of events
@cindex spam
-
You must read this section to understand how @code{spam.el} works.
Do not skip, speed-read, or glance through this section.
@code{spam.el} and the rest of Gnus: checking new mail for spam, and
leaving a group.
-Getting new mail is done in one of two ways. You can either split
-your incoming mail or you can classify new articles as ham or spam
-when you enter the group.
+Getting new mail in Gnus is done in one of two ways. You can either
+split your incoming mail or you can classify new articles as ham or
+spam when you enter the group.
-Splitting incoming mail is better suited to mail backends such as
+Splitting incoming mail is better suited to mail back ends such as
@code{nnml} or @code{nnimap} where new mail appears in a single file
called a @dfn{Spool File}. See @xref{Spam ELisp Package Filtering of
Incoming Mail}.
@vindex gnus-spam-autodetect
@vindex gnus-spam-autodetect-methods
-For backends such as @code{nntp} there is no incoming mail spool, so
+For back ends such as @code{nntp} there is no incoming mail spool, so
an alternate mechanism must be used. This may also happen for
-backends where the server is in charge of splitting incoming mail, and
+back ends where the server is in charge of splitting incoming mail, and
Gnus does not do further splitting. The @code{spam-autodetect} and
@code{spam-autodetect-methods} group parameters (accessible with
@kbd{G c} and @kbd{G p} as usual), and the corresponding variables
(accessible with @kbd{M-x customize-variable} as usual) can help.
When @code{spam-autodetect} is used (you can turn it on for a
-group/topic or wholesale by regex, as needed), it hooks into the
-process of entering a group. Thus, entering a group with unseen or
-unread articles becomes the substitute for checking incoming mail.
-Whether only unseen articles or all unread articles will be processed
-is determined by the @code{spam-autodetect-recheck-messages}. When
-set to @code{t}, unread messages will be rechecked.
+group/topic or wholesale by regular expression matches, as needed), it
+hooks into the process of entering a group. Thus, entering a group
+with unseen or unread articles becomes the substitute for checking
+incoming mail. Whether only unseen articles or all unread articles
+will be processed is determined by the
+@code{spam-autodetect-recheck-messages}. When set to @code{t}, unread
+messages will be rechecked. You should probably stick with the
+default of only checking unseen messages.
@code{spam-autodetect} grants the user at once more and less control
of spam filtering. The user will have more control over each group's
variable) will be marked as spam. Thus, mail split into a spam group
gets automatically marked as spam when you enter the group.
-So, when you exit a group, the @code{spam-processors} are applied, if
-any are set, and the processed mail is moved to the
+Thus, when you exit a group, the @code{spam-processors} are applied,
+if any are set, and the processed mail is moved to the
@code{ham-process-destination} or the @code{spam-process-destination}
depending on the article's classification. If the
@code{ham-process-destination} or the @code{spam-process-destination},
@code{spam-process-destination} is @code{nil}, the spam is marked as
expired, which is usually the right thing to do.
-If spam can not be moved---because of a read-only backend such as
+If spam can not be moved---because of a read-only back end such as
@acronym{NNTP}, for example, it will be copied.
If a ham mail is found in a ham group, as determined by the
necessary, which is what most people want. More on this in
@xref{Spam ELisp Package Configuration Examples}.
-If ham can not be moved---because of a read-only backend such as
+If ham can not be moved---because of a read-only back end such as
@acronym{NNTP}, for example, it will be copied.
If all this seems confusing, don't worry. Soon it will be as natural
@cindex spam filtering incoming mail
@cindex spam
-To use the @file{spam.el} facilities for incoming mail filtering, you
+To use the @code{spam.el} facilities for incoming mail filtering, you
must add the following to your fancy split list
@code{nnmail-split-fancy} or @code{nnimap-split-fancy}:
The boolean variable @code{nnimap-split-download-body} needs to be
set, if you want to split based on the whole message instead of just
the headers. By default, the nnimap back end will only retrieve the
-message headers. If you use @code{spam-check-bogofilter},
-@code{spam-check-ifile}, or @code{spam-check-stat} (the splitters that
-can benefit from the full message body), you should set this variable.
-It is not set by default because it will slow @acronym{IMAP} down, and
-that is not an appropriate decision to make on behalf of the user.
+message headers. If you use a @emph{statistical} filter,
+e.g. @code{spam-check-bogofilter}, @code{spam-check-ifile}, or
+@code{spam-check-stat} (the splitters that can benefit from the full
+message body), this variable will be set automatically. It is not set
+for non-statistical back ends by default because it will slow
+@acronym{IMAP} down.
@xref{Splitting in IMAP}.
-@emph{TODO: spam.el needs to provide a uniform way of training all the
-statistical databases. Some have that functionality built-in, others
-don't.}
-
@node Spam ELisp Package Global Variables
@subsubsection Spam ELisp Package Global Variables
@cindex spam filtering
@code{spam-mark-ham-unread-before-move-from-spam-group} parameter is
set, the ham articles are marked as unread before being moved.
-If ham can not be moved---because of a read-only backend such as
+If ham can not be moved---because of a read-only back end such as
@acronym{NNTP}, for example, it will be copied.
Note that you can use multiples destinations per group or regular
that if you see @samp{nntp:servername} before the group name in the
group buffer then you need it here as well.
-If spam can not be moved---because of a read-only backend such as
+If spam can not be moved---because of a read-only back end such as
@acronym{NNTP}, for example, it will be copied.
Note that you can use multiples destinations per group or regular
only unseen articles or all unread articles should be checked for
spam. It is recommended that you leave it off.
+@node Spam ELisp Package Sorting and Score Display in Summary Buffer
+@subsubsection Spam ELisp Package Sorting and Score Display in Summary Buffer
+@cindex spam scoring
+@cindex spam sorting
+@cindex spam score summary buffer
+@cindex spam sort summary buffer
+@cindex spam
+
+You can display the spam score of articles in your summary buffer, and
+you can sort articles by their spam score.
+
+First you need to decide which back end you will be using. If you use
+the @code{spam-use-spamassassin},
+@code{spam-use-spamassassin-headers}, or @code{spam-use-regex-headers}
+back end, the @code{X-Spam-Status} header will be used. If you use
+@code{spam-use-bogofilter}, the @code{X-Bogosity} header will be used.
+If you use @code{spam-use-crm114}, any header that matches the CRM114
+score format will be used. As long as you set the appropriate back end
+variable to t @emph{before} you load @file{spam.el}, you will be
+fine. @code{spam.el} will automatically add the right header to the
+internal Gnus list of required headers.
+
+To show the spam score in your summary buffer, add this line to your
+@code{gnus.el} file (note @code{spam.el} does not do that by default
+so it won't override any existing @code{S} formats you may have).
+
+@lisp
+(defalias 'gnus-user-format-function-S 'spam-user-format-function-S)
+@end lisp
+
+Now just set your summary line format to use @code{%uS}. Here's an
+example that formats the spam score in a 5-character field:
+
+@lisp
+(setq gnus-summary-line-format
+ "%U%R %10&user-date; $%5uS %6k %B %(%4L: %*%-25,25a%) %s \n")
+@end lisp
+
+Finally, to sort by spam status, either do it globally:
+
+@lisp
+(setq
+ gnus-show-threads nil
+ gnus-article-sort-functions
+ '(spam-article-sort-by-spam-status))
+@end lisp
+
+or per group (@pxref{Sorting the Summary Buffer}).
+
@node Spam ELisp Package Configuration Examples
@subsubsection Spam ELisp Package Configuration Examples
@cindex spam filtering
;; @r{any ham goes to my @samp{nnimap+mail.lifelogs.com:mail} folder, but}
;; @r{also to my @samp{nnimap+mail.lifelogs.com:trainham} folder for training}
- (ham-process-destination "nnimap+mail.lifelogs.com:mail"
+ (ham-process-destination "nnimap+mail.lifelogs.com:mail"
"nnimap+mail.lifelogs.com:trainham")
;; @r{in this group, only @samp{!} marks are ham}
(ham-marks
@end example
-@subsubheading Using @file{spam.el} on an IMAP server with a statistical filter on the server
+@subsubheading Using @code{spam.el} on an IMAP server with a statistical filter on the server
From Reiner Steib <reiner.steib@@gmx.de>.
My provider has set up bogofilter (in combination with @acronym{DCC}) on
(spam-contents gnus-group-spam-classification-ham))
@end lisp
-@itemize
+@itemize
@item @b{The Spam folder:}
In my ham folders, I just hit @kbd{S x}
(@code{gnus-summary-mark-as-spam}) whenever I see an unrecognized spam
mail (false negative). On group exit, those messages are moved to
-@samp{training.ham}.
+@samp{training.spam}.
@end itemize
@subsubheading Reporting spam articles in Gmane groups with @code{spam-report.el}
added to a group's @code{spam-process} parameter, the senders of
spam-marked articles will be added to the blacklist.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-spam-exit-processor-blacklist}, it is recommended
ham-marked articles in @emph{ham} groups will be added to the
whitelist.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-ham-exit-processor-whitelist}, it is recommended
addresses in the BBDB will be allowed through; all others will be
classified as spammers.
+While @code{spam-use-BBDB-exclusive} @emph{can} be used as an alias
+for @code{spam-use-BBDB} as far as @code{spam.el} is concerned, it is
+@emph{not} a separate back end. If you set
+@code{spam-use-BBDB-exclusive} to t, @emph{all} your BBDB splitting
+will be exclusive.
+
@end defvar
@defvar gnus-group-ham-exit-processor-BBDB
ham-marked articles in @emph{ham} groups will be added to the
BBDB.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-ham-exit-processor-BBDB}, it is recommended
Gmane can be found at @uref{http://gmane.org}.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-spam-exit-processor-report-gmane}, it is recommended
Similar to @code{spam-use-whitelist} (@pxref{Blacklists and
Whitelists}), but uses hashcash tokens for whitelisting messages
-instead of the sender address. You must have the @code{hashcash.el}
-package loaded for @code{spam-use-hashcash} to work properly.
-Messages without a hashcash payment token will be sent to the next
-spam-split rule. This is an explicit filter, meaning that unless a
-hashcash token is found, the messages are not assumed to be spam or
-ham.
+instead of the sender address. Messages without a hashcash payment
+token will be sent to the next spam-split rule. This is an explicit
+filter, meaning that unless a hashcash token is found, the messages
+are not assumed to be spam or ham.
@end defvar
contains outdated servers.
The blackhole check uses the @code{dig.el} package, but you can tell
-@file{spam.el} to use @code{dns.el} instead for better performance if
+@code{spam.el} to use @code{dns.el} instead for better performance if
you set @code{spam-use-dig} to @code{nil}. It is not recommended at
this time to set @code{spam-use-dig} to @code{nil} despite the
possible performance improvements, because some users may be unable to
added to a group's @code{spam-process} parameter, spam-marked articles
will be added to the Bogofilter spam database.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-spam-exit-processor-bogofilter}, it is recommended
articles in @emph{ham} groups will be added to the Bogofilter database
of non-spam messages.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-ham-exit-processor-bogofilter}, it is recommended
used, or has already been used on the article. The 0.9.2.1 version of
Bogofilter was used to test this functionality.
-@node SpamAssassin backend
-@subsubsection SpamAssassin backend
+@node SpamAssassin back end
+@subsubsection SpamAssassin back end
@cindex spam filtering
@cindex spamassassin, spam filtering
@cindex spam
added to a group's @code{spam-process} parameter, the spam-marked
articles will be added to the spam-stat database of spam messages.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-spam-exit-processor-stat}, it is recommended
articles in @emph{ham} groups will be added to the spam-stat database
of non-spam messages.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-ham-exit-processor-stat}, it is recommended
the same way, we promise.
@end defvar
-This enables @file{spam.el} to cooperate with @file{spam-stat.el}.
+This enables @code{spam.el} to cooperate with @file{spam-stat.el}.
@file{spam-stat.el} provides an internal (Lisp-only) spam database,
which unlike ifile or Bogofilter does not require external programs.
A spam and a ham processor, and the @code{spam-use-stat} variable for
@xref{Mail Source Specifiers}, (@pxref{SpamAssassin}). This method has
the advantage that the user can see the @emph{X-Spam} headers.
-The easiest method is to make @file{spam.el} (@pxref{Filtering Spam
+The easiest method is to make @code{spam.el} (@pxref{Filtering Spam
Using The Spam ELisp Package}) call SpamOracle.
@vindex spam-use-spamoracle
-To enable SpamOracle usage by @file{spam.el}, set the variable
+To enable SpamOracle usage by @code{spam.el}, set the variable
@code{spam-use-spamoracle} to @code{t} and configure the
@code{nnmail-split-fancy} or @code{nnimap-split-fancy} as described in
the section @xref{Filtering Spam Using The Spam ELisp Package}. In
characteristics of your spam mails. Using the @emph{add} mode
(training mode) one has to feed good (ham) and spam mails to
SpamOracle. This can be done by pressing @kbd{|} in the Summary buffer
-and pipe the mail to a SpamOracle process or using @file{spam.el}'s
+and pipe the mail to a SpamOracle process or using @code{spam.el}'s
spam- and ham-processors, which is much more convenient. For a
detailed description of spam- and ham-processors, @xref{Filtering Spam
Using The Spam ELisp Package}.
to a group's @code{spam-process} parameter, spam-marked articles will be
sent to SpamOracle as spam samples.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-spam-exit-processor-spamoracle}, it is recommended
@emph{ham} groups will be sent to the SpamOracle as samples of ham
messages.
-@emph{WARNING}
+@emph{WARNING}
Instead of the obsolete
@code{gnus-group-ham-exit-processor-spamoracle}, it is recommended
"True if blackbox should be used.")
@end lisp
-Add
-@lisp
-(spam-use-blackbox . spam-check-blackbox)
-@end lisp
-to @code{spam-list-of-checks}.
-
-Add
-@lisp
-(gnus-group-ham-exit-processor-blackbox ham spam-use-blackbox)
-(gnus-group-spam-exit-processor-blackbox spam spam-use-blackbox)
-@end lisp
-
-to @code{spam-list-of-processors}.
-
-Add
-@lisp
-(spam-use-blackbox spam-blackbox-register-routine
- nil
- spam-blackbox-unregister-routine
- nil)
-@end lisp
+Write @code{spam-check-blackbox} if Blackbox can check incoming mail.
-to @code{spam-registration-functions}. Write the register/unregister
-routines using the bogofilter register/unregister routines as a
-start, or other restister/unregister routines more appropriate to
-Blackbox.
+Write @code{spam-blackbox-register-routine} and
+@code{spam-blackbox-unregister-routine} using the bogofilter
+register/unregister routines as a start, or other restister/unregister
+routines more appropriate to Blackbox, if Blackbox can
+register/unregister spam and ham.
@item
Functionality
-Write the @code{spam-check-blackbox} function. It should return
-@samp{nil} or @code{spam-split-group}, observing the other
-conventions. See the existing @code{spam-check-*} functions for
-examples of what you can do, and stick to the template unless you
-fully understand the reasons why you aren't.
-
-Make sure to add @code{spam-use-blackbox} to
-@code{spam-list-of-statistical-checks} if Blackbox is a statistical
-mail analyzer that needs the full message body to operate.
+The @code{spam-check-blackbox} function should return @samp{nil} or
+@code{spam-split-group}, observing the other conventions. See the
+existing @code{spam-check-*} functions for examples of what you can
+do, and stick to the template unless you fully understand the reasons
+why you aren't.
@end enumerate
provide them if Blackbox supports spam or ham processing.
Also, ham and spam processors are being phased out as single
-variables. Instead the form @code{'(spam spam-use-blackbox)} or
+variables. Instead the form @code{'(spam spam-use-blackbox)} or
@code{'(ham spam-use-blackbox)} is favored. For now, spam/ham
processor variables are still around but they won't be for long.
(variable-item spam-use-blackbox)
@end lisp
to the @code{spam-autodetect-methods} group parameter in
-@code{gnus.el}.
+@code{gnus.el} if Blackbox can check incoming mail for spam contents.
+
+Finally, use the appropriate @code{spam-install-*-backend} function in
+@code{spam.el}. Here are the available functions.
+
+
+@enumerate
+
+@item
+@code{spam-install-backend-alias}
+
+This function will simply install an alias for a back end that does
+everything like the original back end. It is currently only used to
+make @code{spam-use-BBDB-exclusive} act like @code{spam-use-BBDB}.
+
+@item
+@code{spam-install-nocheck-backend}
+
+This function installs a back end that has no check function, but can
+register/unregister ham or spam. The @code{spam-use-gmane} back end is
+such a back end.
+
+@item
+@code{spam-install-checkonly-backend}
+
+This function will install a back end that can only check incoming mail
+for spam contents. It can't register or unregister messages.
+@code{spam-use-blackholes} and @code{spam-use-hashcash} are such
+back ends.
+
+@item
+@code{spam-install-statistical-checkonly-backend}
+
+This function installs a statistical back end (one which requires the
+full body of a message to check it) that can only check incoming mail
+for contents. @code{spam-use-regex-body} is such a filter.
+
+@item
+@code{spam-install-statistical-backend}
+
+This function install a statistical back end with incoming checks and
+registration/unregistration routines. @code{spam-use-bogofilter} is
+set up this way.
+
+@item
+@code{spam-install-backend}
+
+This is the most normal back end installation, where a back end that can
+check and register/unregister messages is set up without statistical
+abilities. The @code{spam-use-BBDB} is such a back end.
+
+@item
+@code{spam-install-mover-backend}
+
+Mover back ends are internal to @code{spam.el} and specifically move
+articles around when the summary is exited. You will very probably
+never install such a back end.
+@end enumerate
@end enumerate
* Red Gnus:: Third time best---Gnus 5.4/5.5.
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
-* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
* No Gnus:: Lars, FIXME!
@end menu
@kbd{J r} in the server buffer. Gnus will not download articles into
the Agent cache, unless you instruct it to do so, though, by using
@kbd{J u} or @kbd{J s} from the Group buffer. You revert to the old
-behaviour of having the Agent disabled with @code{(setq gnus-agent
+behavior of having the Agent disabled with @code{(setq gnus-agent
nil)}. Note that putting @code{(gnus-agentize)} in @file{~/.gnus.el}
is not needed any more.
system. While the variable is called @code{canlock-password}, it is not
security sensitive data. Publishing your canlock string on the web
will not allow anyone to be able to anything she could not already do.
-The behaviour can be changed by customizing @code{message-insert-canlock}.
+The behavior can be changed by customizing @code{message-insert-canlock}.
@item
Gnus supports server-side mail filtering using Sieve.
@item
The default for @code{message-forward-show-mml} changed to symbol @code{best}.
-The behaviour for the @code{best} value is to show @acronym{MML} (i.e.,
+The behavior for the @code{best} value is to show @acronym{MML} (i.e.,
convert to @acronym{MIME}) when appropriate. @acronym{MML} will not be
used when forwarding signed or encrypted messages, as the conversion
invalidate the digital signature.
number of unread articles is called @dfn{activating the group}.
Un-activated groups are listed with @samp{*} in the group buffer.
+@item spool
+@cindex spool
+News servers store their articles locally in one fashion or other.
+One old-fashioned storage method is to have just one file per
+article. That's called a ``traditional spool''.
+
@item server
@cindex server
A machine one can connect to and get news (or mail) from.
@item gnus-read-active-file
Set this to @code{nil}, which will inhibit Gnus from requesting the
-entire active file from the server. This file is often v. large. You
+entire active file from the server. This file is often very large. You
also have to set @code{gnus-check-new-newsgroups} and
@code{gnus-check-bogus-newsgroups} to @code{nil} to make sure that Gnus
doesn't suddenly decide to fetch the active file anyway.
@code{gnus-nov-is-evil} to @code{nil} to make entering and exiting the
summary buffer faster.
-Gnus uses the internal ELisp-based @code{uncompface} program for
-decoding an @code{X-Face} header normally in Emacs. If you feel it is
-slow, set @code{uncompface-use-external} to @code{t}. @xref{X-Face}.
-
@page
@node Troubleshooting
edebug. Debugging Lisp code is documented in the Elisp manual
(@pxref{Debugging, , Debugging Lisp Programs, elisp, The GNU Emacs
Lisp Reference Manual}). To get you started with edebug, consider if
-you discover some weird behaviour when pressing @kbd{c}, the first
+you discover some weird behavior when pressing @kbd{c}, the first
step is to do @kbd{C-h k c} and click on the hyperlink (Emacs only) in
the documentation buffer that leads you to the function definition,
then press @kbd{M-x edebug-defun RET} with point inside that function,
alterations. This comes in handy if the back end really carries all
the information (as is the case with virtual and imap groups). This
function should destructively alter the info to suit its needs, and
-should return a non-@code{nil} value.
+should return a non-@code{nil} value (exceptionally,
+@code{nntp-request-update-info} always returns @code{nil} not to waste
+the network resources).
There should be no result data from this function.
projects / gnus / blobdiff