* Server Buffer:: Making and editing virtual servers.
* Getting News:: Reading USENET news with Gnus.
-* Using @acronym{IMAP}:: Reading mail from @acronym{IMAP}.
+* Using IMAP:: Reading mail from @acronym{IMAP}.
* Getting Mail:: Reading your personal mail with Gnus.
* Browsing the Web:: Getting messages from a plethora of Web sources.
* Other Sources:: Reading directories, files.
corresponding regular expression in @code{gnus-article-banner-alist} is
used.
+For instance:
+
+@lisp
+(setq gnus-article-banner-alist
+ ((googleGroups .
+ "^\n*--~--~---------\\(.+\n\\)+")))
+@end lisp
+
Regardless of a group, you can hide things like advertisements only when
the sender of an article has a certain mail address specified in
@code{gnus-article-address-banner-alist}.
@item A C
@vindex gnus-fetch-partial-articles
@findex gnus-summary-show-complete-article
-If @code{gnus-fetch-partial-articles} is non-@code{nil}, Gnus will
+If @code{<backend>-fetch-partial-articles} is non-@code{nil}, Gnus will
fetch partial articles, if the backend it fetches them from supports
it. Currently only @code{nnimap} does. If you're looking at a
partial article, and want to see the complete article instead, then
install an OpenPGP implementation such as GnuPG. The Lisp interface
to GnuPG included with Emacs is called EasyPG (@pxref{Top, ,EasyPG,
epa, EasyPG Assistant user's manual}), but PGG (@pxref{Top, ,PGG, pgg,
-PGG Manual}), Mailcrypt, and gpg.el are also supported.
+PGG Manual}), and Mailcrypt are also supported.
@item
To handle @acronym{S/MIME} message, you need to install OpenSSL. OpenSSL 0.9.6
@vindex mml1991-use
Symbol indicating elisp interface to OpenPGP implementation for
@acronym{PGP} messages. The default is @code{epg}, but @code{pgg},
-@code{mailcrypt}, and @code{gpg} are also supported although
+and @code{mailcrypt} are also supported although
deprecated. By default, Gnus uses the first available interface in
this order.
@vindex mml2015-use
Symbol indicating elisp interface to OpenPGP implementation for
@acronym{PGP/MIME} messages. The default is @code{epg}, but
-@code{pgg}, @code{mailcrypt}, and @code{gpg} are also supported
+@code{pgg}, and @code{mailcrypt} are also supported
although deprecated. By default, Gnus uses the first available
interface in this order.
@menu
* Server Buffer:: Making and editing virtual servers.
* Getting News:: Reading USENET news with Gnus.
-* Using @acronym{IMAP}:: Reading mail from @acronym{IMAP}.
+* Using IMAP:: Reading mail from @acronym{IMAP}.
* Getting Mail:: Reading your personal mail with Gnus.
* Browsing the Web:: Getting messages from a plethora of Web sources.
* Other Sources:: Reading directories, files.
Note that not all servers support the recommended ID. This works for
INN versions 2.3.0 and later, for instance.
+@item nntp-server-list-active-group
+If @code{nil}, then always use @samp{GROUP} instead of @samp{LIST
+ACTIVE}. This is usually slower, but on misconfigured servers that
+don't update their active files often, this can help.
+
+
@end table
@menu
@end table
-@node Using @acronym{IMAP}
-@section Using @acronym{IMAP}
+@node Using IMAP
+@section Using IMAP
@cindex imap
The most popular mail backend is probably @code{nnimap}, which
from different locations, or with different user agents.
@menu
-* Connecting to an @acronym{IMAP} Server:: Getting started with @acronym{IMAP}.
-* Customizing the @acronym{IMAP} Connection:: Variables for @acronym{IMAP} connection.
-* Client-Side @acronym{IMAP} Splitting:: Put mail in the correct mail box.
+* Connecting to an IMAP Server:: Getting started with @acronym{IMAP}.
+* Customizing the IMAP Connection:: Variables for @acronym{IMAP} connection.
+* Client-Side IMAP Splitting:: Put mail in the correct mail box.
@end menu
-@node Connecting to an @acronym{IMAP} Server
-@subsection Connecting to an @acronym{IMAP} Server
+@node Connecting to an IMAP Server
+@subsection Connecting to an IMAP Server
Connecting to an @acronym{IMAP} can be very easy. Type @kbd{B} in the
-group buffer, or add something like the following to your secondary
-select methods:
+group buffer, or (if your primary interest is reading email), say
+something like:
@example
-(setq gnus-secondary-select-methods
- '((nnimap "imap.gmail.com")))
+(setq gnus-select-method
+ '(nnimap "imap.gmail.com"))
@end example
You'll be prompted for a user name and password. If you grow tired of
That should basically be it for most users.
-@node Customizing the @acronym{IMAP} Connection
-@subsection Customizing the @acronym{IMAP} Connection
+@node Customizing the IMAP Connection
+@subsection Customizing the IMAP Connection
Here's an example method that's more complex:
@example
(nnimap "imap.gmail.com"
(nnimap-inbox "INBOX")
- (nnimap-split-methods ,nnmail-split-methods)
+ (nnimap-split-methods default)
(nnimap-expunge t)
- (nnimap-stream 'ssl)
+ (nnimap-stream ssl)
(nnir-search-engine imap)
(nnimap-expunge-inbox t))
@end example
Virtually all @code{IMAP} server support fast streaming of data. If
you have problems connecting to the server, try setting this to @code{nil}.
+@item nnimap-fetch-partial-articles
+If non-@code{nil}, fetch partial articles from the server. If set to
+a string, then it's interpreted as a regexp, and parts that have
+matching types will be fetched. For instance, @samp{"text/"} will
+fetch all textual parts, while leaving the rest on the server.
+
@end table
-@node Client-Side @acronym{IMAP} Splitting
-@subsection Client-Side @acronym{IMAP} Splitting
+@node Client-Side IMAP Splitting
+@subsection Client-Side IMAP Splitting
Many people prefer to do the sorting/splitting of mail into their mail
boxes on the @acronym{IMAP} server. That way they don't have to
@item nnimap-split-methods
Uses the same syntax as @code{nnmail-split-methods} (@pxref{Splitting
-Mail}).
+Mail}), except the symbol @code{default}, which means that it should
+use the value of the @code{nnmail-split-methods} variable.
+
+@item nnimap-split-fancy
+Uses the same syntax as @code{nnmail-split-fancy}.
@end table
message. The function should return a list of group names that it
thinks should carry this mail message.
+This variable can also be a fancy split method. For the syntax,
+see @ref{Fancy Mail Splitting}.
+
Note that the mail back ends are free to maul the poor, innocent,
incoming headers all they want to. They all add @code{Lines} headers;
some add @code{X-Gnus-Group} headers; most rename the Unix mbox
@acronym{IMAP} as intended, as a network mail reading protocol (ie
with nnimap), for some reason or other, Gnus let you treat it similar
to a @acronym{POP} server and fetches articles from a given
-@acronym{IMAP} mailbox. @xref{Using @acronym{IMAP}}, for more information.
+@acronym{IMAP} mailbox. @xref{Using IMAP}, for more information.
Keywords:
:fetchflag "\\Seen")
@end lisp
-@item webmail
-Get mail from a webmail server, such as @uref{http://www.hotmail.com/},
-@uref{http://webmail.netscape.com/}, @uref{http://www.netaddress.com/},
-@uref{http://mail.yahoo.com/}.
-
-NOTE: Webmail largely depends on cookies. A "one-line-cookie" patch is
-required for url "4.0pre.46".
-
-WARNING: Mails may be lost. NO WARRANTY.
-
-Keywords:
-
-@table @code
-@item :subtype
-The type of the webmail server. The default is @code{hotmail}. The
-alternatives are @code{netscape}, @code{netaddress}, @code{my-deja}.
-
-@item :user
-The user name to give to the webmail server. The default is the login
-name.
-
-@item :password
-The password to give to the webmail server. If not specified, the user is
-prompted.
-
-@item :dontexpunge
-If non-@code{nil}, only fetch unread articles and don't move them to
-trash folder after finishing the fetch.
-
-@end table
-
-An example webmail source:
-
-@lisp
-(webmail :subtype 'hotmail
- :user "user-name"
- :password "secret")
-@end lisp
-
@item group
Get the actual mail source from the @code{mail-source} group parameter,
@xref{Group Parameters}.
above. Also note that with the nnimap backend, message bodies will
not be downloaded by default. You need to set
@code{nnimap-split-download-body} to @code{t} to do that
-(@pxref{Client-Side @acronym{IMAP} Splitting}).
+(@pxref{Client-Side IMAP Splitting}).
@item (! @var{func} @var{split})
If the split is a list, and the first element is @code{!}, then
Ordered list of suffixes on picon file names to try. Defaults to
@code{("xpm" "gif" "xbm")} minus those not built-in your Emacs.
+@item gnus-picon-inhibit-top-level-domains
+@vindex gnus-picon-inhibit-top-level-domains
+If non-@code{nil} (which is the default), don't display picons for
+things like @samp{.net} and @samp{.de}, which aren't usually very
+interesting.
+
@end table
@node Gravatars
The size in pixels of gravatars. Gravatars are always square, so one
number for the size is enough.
-@item gnus-gravatar-relief
-@vindex gnus-gravatar-relief
-If non-nil, adds a shadow rectangle around the image. The value,
-relief, specifies the width of the shadow lines, in pixels. If relief
-is negative, shadows are drawn so that the image appears as a pressed
-button; otherwise, it appears as an unpressed button.
+@item gnus-gravatar-properties
+@vindex gnus-gravatar-properties
+List of image properties applied to Gravatar images.
@end table
Note that with the nnimap back end, message bodies will not be
downloaded by default. You need to set
@code{nnimap-split-download-body} to @code{t} to do that
-(@pxref{Client-Side @acronym{IMAP} Splitting}).
+(@pxref{Client-Side IMAP Splitting}).
That is about it. As some spam is likely to get through anyway, you
might want to have a nifty function to call when you happen to read
retrieve the message bodies as well. We don't set this by default
because it will slow @acronym{IMAP} down, and that is not an
appropriate decision to make on behalf of the user. @xref{Client-Side
-@acronym{IMAP} Splitting}.
+IMAP Splitting}.
You have to specify one or more spam back ends for @code{spam-split}
to use, by setting the @code{spam-use-*} variables. @xref{Spam Back
spam-move-spam-nonspam-groups-only nil
spam-mark-only-unseen-as-spam t
spam-mark-ham-unread-before-move-from-spam-group t
- nnimap-split-rule 'nnimap-split-fancy
;; @r{understand what this does before you copy it to your own setup!}
+ ;; @r{for nnimap you'll probably want to set nnimap-split-methods, see the manual}
nnimap-split-fancy '(|
;; @r{trace references to parents and put in their group}
(: gnus-registry-split-fancy-with-parent)
@example
(setq spam-use-spamoracle t
spam-split-group "Junk"
+ ;; @r{for nnimap you'll probably want to set nnimap-split-methods, see the manual}
nnimap-split-inbox '("INBOX")
- nnimap-split-rule 'nnimap-split-fancy
nnimap-split-fancy '(| (: spam-split) "INBOX"))
@end example
Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
@item
-Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el, webmail.el,
+Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el,
nnwarchive and many, many other things connected with @acronym{MIME} and
other types of en/decoding, as well as general bug fixing, new
functionality and stuff.
@acronym{TLS} wrapper shipped with Gnus
@acronym{TLS}/@acronym{SSL} is now supported in @acronym{IMAP} and
-@acronym{NNTP} via @file{tls.el} and GNUTLS. The old
-@acronym{TLS}/@acronym{SSL} support via (external third party)
-@file{ssl.el} and OpenSSL still works.
+@acronym{NNTP} via @file{tls.el} and GNUTLS.
@item
Improved anti-spam features.
projects / gnus / blobdiff