Headers matching the @code{message-ignored-supersedes-headers} are
removed before popping up the new message buffer. The default is@*
@samp{^Path:\\|^Date\\|^NNTP-Posting-Host:\\|^Xref:\\|^Lines:\\|@*
-^Received:\\|^X-From-Line:\\|Return-Path:\\|^Supersedes:}.
+^Received:\\|^X-From-Line:\\|^X-Trace:\\|^X-Complaints-To:\\|@*
+Return-Path:\\|^Supersedes:\\|^NNTP-Posting-Date:\\|^X-Trace:\\|@*
+^X-Complaints-To:\\|^Cancel-Lock:\\|^Cancel-Key:\\|^X-Hashcash:\\|@*
+^X-Payment:\\|^Approved:}.
@vindex message-ignored-bounced-headers
Headers that match the @code{message-ignored-bounced-headers} regexp
will be removed before popping up the buffer. The default is
-@samp{^\\(Received\\|Return-Path\\):}.
+@samp{^\\(Received\\|Return-Path\\|Delivered-To\\):}.
@node Mailing Lists
@cindex Mail-Followup-To
Sometimes while posting to mailing lists, the poster needs to direct
followups to the post to specific places. The Mail-Followup-To (MFT)
-was created to enable just this. Two example scenarios where this is
+was created to enable just this. Three example scenarios where this is
useful:
@itemize @bullet
@kindex C-c C-f x
@findex message-cross-post-followup-to
@vindex message-cross-post-default
+@vindex message-cross-post-note-function
@cindex X-Post
@cindex cross-post
-Ask for an additional @samp{Newsgroups} and @samp{FollowUp-To} for a
-cross-post. @code{message-cross-post-followup-to} mangles
-@samp{FollowUp-To} and @samp{Newsgroups} header to point to group.
-If @code{message-cross-post-default} is @code{nil} or if called with a
-prefix-argument @samp{Follow-Up} is set, but the message is not
-cross-posted.
+Set up the @samp{FollowUp-To} header with a target newsgroup for a
+cross-post, add that target newsgroup to the @samp{Newsgroups} header if
+it is not a member of @samp{Newsgroups}, and insert a note in the body.
+If @code{message-cross-post-default} is @code{nil} or if this command is
+called with a prefix-argument, only the @samp{FollowUp-To} header will
+be set but the the target newsgroup will not be added to the
+@samp{Newsgroups} header. The function to insert a note is controlled
+by the @code{message-cross-post-note-function} variable.
@item C-c C-f t
@kindex C-c C-f t
@findex message-reduce-to-to-cc
Replace contents of @samp{To} header with contents of @samp{Cc} or
-@samp{Bcc} header.
+@samp{Bcc} header. (Iff @samp{Cc} header is not present, @samp{Bcc}
+header will be used instead.)
@item C-c C-f w
@kindex C-c C-f w
@findex message-insert-wide-reply
Insert @samp{To} and @samp{Cc} headers as if you were doing a wide
-reply.
+reply even if the message was not made for a wide reply first.
@item C-c C-f a
@kindex C-c C-f a
@item C-c M-m
@kindex C-c M-m
@findex message-mark-inserted-region
-Mark some region in the current article with enclosing tags.
-See @code{message-mark-insert-begin} and @code{message-mark-insert-end}.
+Mark some region in the current article with enclosing tags. See
+@code{message-mark-insert-begin} and @code{message-mark-insert-end}.
+When called with a prefix argument, use slrn style verbatim marks
+(@samp{#v+} and @samp{#v-}).
@item C-c M-f
@kindex C-c M-f
@findex message-mark-insert-file
Insert a file in the current article with enclosing tags.
See @code{message-mark-insert-begin} and @code{message-mark-insert-end}.
+When called with a prefix argument, use slrn style verbatim marks
+(@samp{#v+} and @samp{#v-}).
@end table
The @code{message-use-idna} variable control whether @acronym{IDNA} is
used. If the variable is @code{nil} no @acronym{IDNA} encoding will
ever happen, if it is set to the symbol @code{ask} the user will be
-queried, and if set to @code{t} @acronym{IDNA} encoding happens
-automatically (the default).
+queried, and if set to @code{t} (which is the default if @acronym{IDNA}
+is fully available) @acronym{IDNA} encoding happens automatically.
@findex message-idna-to-ascii-rhs
If you want to experiment with the @acronym{IDNA} encoding, you can
Kill the address under point.
@item C-c C-z
-@kindex C-c C-x
+@kindex C-c C-z
@findex message-kill-to-signature
Kill all the text up to the signature, or if that's missing, up to the
end of the message (@code{message-kill-to-signature}).
@kindex TAB
@findex message-tab
@vindex message-tab-body-function
-If non-@code{nil} execute the function specified in
-@code{message-tab-body-function}. Otherwise use the function bound to
-@kbd{TAB} in @code{text-mode-map} or @code{global-map}.
+If @code{message-tab-body-function} is non-@code{nil}, execute the
+function it specifies. Otherwise use the function bound to @kbd{TAB} in
+@code{text-mode-map} or @code{global-map}.
@end table
@item message-required-mail-headers
@vindex message-required-mail-headers
@xref{News Headers}, for the syntax of this variable. It is
-@code{(From Date Subject (optional . In-Reply-To) Message-ID Lines
+@code{(From Subject Date (optional . In-Reply-To) Message-ID
(optional . User-Agent))} by default.
@item message-ignored-mail-headers
@vindex message-ignored-mail-headers
-Regexp of headers to be removed before mailing. The default is
-@samp{^[GF]cc:\\|^Resent-Fcc:\\|^Xref:\\|^X-Draft-From:}.
+Regexp of headers to be removed before mailing. The default is@*
+@samp{^[GF]cc:\\|^Resent-Fcc:\\|^Xref:\\|^X-Draft-From:\\|@*
+^X-Gnus-Agent-Meta-Information:}.
@item message-default-mail-headers
@vindex message-default-mail-headers
@item message-ignored-news-headers
@vindex message-ignored-news-headers
Regexp of headers to be removed before posting. The default is@*
-@samp{^NNTP-Posting-Host:\\|^Xref:\\|^[BGF]cc:\\|^Resent-Fcc:\\|^X-Draft-From:}.
+@samp{^NNTP-Posting-Host:\\|^Xref:\\|^[BGF]cc:\\|^Resent-Fcc:\\|@*
+^X-Draft-From:\\|^X-Gnus-Agent-Meta-Information:}.
@item message-default-news-headers
@vindex message-default-news-headers
@item message-default-charset
@vindex message-default-charset
@cindex charset
-Symbol naming a @acronym{MIME} charset. Non-@acronym{ASCII}
-characters in messages are assumed to be encoded using this charset.
-The default is @code{nil}, which means ask the user. (This variable
-is used only on non-@sc{mule} Emacsen. @xref{Charset Translation, ,
-Charset Translation, emacs-mime, Emacs MIME Manual}, for details on
-the @sc{mule}-to-@acronym{MIME} translation process.
+Symbol naming a @acronym{MIME} charset. Non-@acronym{ASCII} characters
+in messages are assumed to be encoded using this charset. The default
+is @code{iso-8859-1} on non-@sc{mule} Emacsen; otherwise @code{nil},
+which means ask the user. (This variable is used only on non-@sc{mule}
+Emacsen.) @xref{Charset Translation, , Charset Translation, emacs-mime,
+Emacs MIME Manual}, for details on the @sc{mule}-to-@acronym{MIME}
+translation process.
@item message-signature-separator
@vindex message-signature-separator
projects / gnus / blobdiff