\begin{document}
% Adjust ../Makefile.in if you change the following line:
-\newcommand{\gnusversionname}{No Gnus v0.5}
+\newcommand{\gnusversionname}{No Gnus v0.7}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
luck.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to No Gnus v0.5.
+This manual corresponds to No Gnus v0.7.
@end ifinfo
* Various:: General purpose settings.
* The End:: Farewell and goodbye.
* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
+* GNU Free Documentation License:: The license for this documentation.
* Index:: Variable, function and concept index.
* Key Index:: Key Index.
@chapter Starting Gnus
@cindex starting up
-If you are haven't used Emacs much before using Gnus, read @ref{Emacs
-for Heathens} first.
+If you haven't used Emacs much before using Gnus, read @ref{Emacs for
+Heathens} first.
@kindex M-x gnus
@findex gnus
the commands that say they move to the next unread group. The default
is @code{t}.
+@vindex gnus-summary-next-group-on-exit
+If @code{gnus-summary-next-group-on-exit} is @code{t}, when a summary is
+exited, the point in the group buffer is moved to the next unread group.
+Otherwise, the point is set to the group just exited. The default is
+@code{t}.
@node Selecting a Group
@section Selecting a Group
@item v
@kindex v (Group)
@cindex keys, reserved for users (Group)
-The key @kbd{v} is reserved for users. You can bind it key to some
-function or better use it as a prefix key. For example:
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key. For example:
@lisp
(define-key gnus-group-mode-map (kbd "v j d")
@kindex v (Summary)
@cindex keys, reserved for users (Summary)
-The key @kbd{v} is reserved for users. You can bind it key to some
-function or better use it as a prefix key. For example:
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key. For example:
@lisp
(define-key gnus-summary-mode-map (kbd "v -") "LrS") ;; lower subthread
@end lisp
(@code{gnus-summary-limit-to-recipient}). If given a prefix, exclude
matching articles.
+@item / A
+@kindex / A (Summary)
+@findex gnus-summary-limit-to-address
+Limit the summary buffer to articles in which contents of From, To or Cc
+header match a given address (@code{gnus-summary-limit-to-address}). If
+given a prefix, exclude matching articles.
+
@item / S
@kindex / S (Summary)
@findex gnus-summary-limit-to-singletons
@code{nil}, no pre-fetching will be done.
@vindex gnus-async-prefetch-article-p
-@findex gnus-async-read-p
+@findex gnus-async-unread-p
There are probably some articles that you don't want to pre-fetch---read
articles, for instance. The @code{gnus-async-prefetch-article-p}
variable controls whether an article is to be pre-fetched. This
function should return non-@code{nil} when the article in question is
-to be pre-fetched. The default is @code{gnus-async-read-p}, which
+to be pre-fetched. The default is @code{gnus-async-unread-p}, which
returns @code{nil} on read articles. The function is called with an
article data structure as the only parameter.
message ID or a mail address. If it is one of the symbols @code{mid} or
@code{mail}, Gnus will always assume that the string is a message ID or
a mail address, respectively. If this variable is set to the symbol
-@code{ask}, always query the user what do do. If it is a function, this
+@code{ask}, always query the user what to do. If it is a function, this
function will be called with the string as its only argument. The
function must return @code{mid}, @code{mail}, @code{invalid} or
@code{ask}. The default value is the function
some format, you @kbd{C-d} and read these messages in a more convenient
fashion.
+@vindex gnus-auto-select-on-ephemeral-exit
+The variable @code{gnus-auto-select-on-ephemeral-exit} controls what
+article should be selected after exiting a digest group. Valid values
+include:
+
+@table @code
+@item next
+Select the next article.
+
+@item next-unread
+Select the next unread article.
+
+@item next-noselect
+Move the cursor to the next article. This is the default.
+
+@item next-unread-noselect
+Move the cursor to the next unread article.
+@end table
+
+If it has any other value or there is no next (unread) article, the
+article selected before entering to the digest group will appear.
+
@item C-M-d
@kindex C-M-d (Summary)
@findex gnus-summary-read-document
@kindex v (Article)
@cindex keys, reserved for users (Article)
-The key @kbd{v} is reserved for users. You can bind it key to some
-function or better use it as a prefix key.
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key.
A few additional keystrokes are available:
@item gnus-single-article-buffer
@vindex gnus-single-article-buffer
+@cindex article buffers, several
If non-@code{nil}, use the same article buffer for all the groups.
(This is the default.) If @code{nil}, each group will have its own
article buffer.
@vindex gnus-message-archive-method
@code{gnus-message-archive-method} says what virtual server Gnus is to
-use to store sent messages. The default is:
+use to store sent messages. The default is @code{"archive"}, and when
+actually being used it is expanded into:
@lisp
(nnfolder "archive"
(nnfolder-inhibit-expiry t))
@end lisp
+@quotation
+@vindex gnus-update-message-archive-method
+Note: a server like this is saved in the @file{~/.newsrc.eld} file first
+so that it may be used as a real method of the server which is named
+@code{"archive"} (that is, for the case where
+@code{gnus-message-archive-method} is set to @code{"archive"}) ever
+since. If it once has been saved, it will never be updated by default
+even if you change the value of @code{gnus-message-archive-method}
+afterward. Therefore, the server @code{"archive"} doesn't necessarily
+mean the @code{nnfolder} server like this at all times. If you want the
+saved method to reflect always the value of
+@code{gnus-message-archive-method}, set the
+@code{gnus-update-message-archive-method} variable to a non-@code{nil}
+value. The default value of this variable is @code{nil}.
+@end quotation
+
You can, however, use any mail select method (@code{nnml},
@code{nnmbox}, etc.). @code{nnfolder} is a quite likable select method
for doing this sort of thing, though. If you don't like the default
@item v
@kindex v (Server)
@cindex keys, reserved for users (Server)
-The key @kbd{v} is reserved for users. You can bind it key to some
-function or better use it as a prefix key.
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key.
@item a
@kindex a (Server)
@code{nnmail-split-header-length-limit} are excluded from the split
function.
-@vindex nnmail-mail-splitting-charset
@vindex nnmail-mail-splitting-decodes
-By default, splitting @acronym{MIME}-decodes headers so you
-can match on non-@acronym{ASCII} strings. The
-@code{nnmail-mail-splitting-charset} variable specifies the default
-charset for decoding. The behavior can be turned off completely by
-binding @code{nnmail-mail-splitting-decodes} to @code{nil}, which is
-useful if you want to match articles based on the raw header data.
+@vindex nnmail-mail-splitting-charset
+By default, splitting does not decode headers, so you can not match on
+non-@acronym{ASCII} strings. But it is useful if you want to match
+articles based on the raw header data. To enable it, set the
+@code{nnmail-mail-splitting-decodes} variable to a non-@code{nil} value.
+In addition, the value of the @code{nnmail-mail-splitting-charset}
+variable is used for decoding non-@acronym{MIME} encoded string when
+@code{nnmail-mail-splitting-decodes} is non-@code{nil}. The default
+value is @code{nil} which means not to decode non-@acronym{MIME} encoded
+string. A suitable value for you will be @code{undecided} or be the
+charset used normally in mails you are interested in.
@vindex nnmail-resplit-incoming
By default, splitting is performed on all incoming messages. If you
@item mail-source-delete-old-incoming-confirm
@vindex mail-source-delete-old-incoming-confirm
-If non-@code{nil}, ask for for confirmation before deleting old incoming
+If non-@code{nil}, ask for confirmation before deleting old incoming
files. This variable only applies when
@code{mail-source-delete-incoming} is a positive number.
@itemize @bullet
@item
Allow @code{nndiary} to retrieve new mail by itself. Put the following
-line in your @file{gnusrc} file:
+line in your @file{~/.gnus.el} file:
@lisp
(setq nndiary-get-new-mail t)
@defvar nndiary-reminders
This is the list of times when you want to be reminded of your
-appointements (e.g. 3 weeks before, then 2 days before, then 1 hour
+appointments (e.g. 3 weeks before, then 2 days before, then 1 hour
before and that's it). Remember that ``being reminded'' means that the
diary message will pop up as brand new and unread again when you get new
mail.
@code{gnus-diary} written on top of @code{nndiary}, that does many
useful things for you.
- In order to use it, add the following line to your @file{gnusrc} file:
+ In order to use it, add the following line to your @file{~/.gnus.el} file:
@lisp
(require 'gnus-diary)
@node Sending or Not Sending
@subsection Sending or Not Sending
-Well, assuming you've read of of the above, here are two final notes on
+Well, assuming you've read all of the above, here are two final notes on
mail sending with @code{nndiary}:
@itemize @bullet
@item
@code{nndiary} is a @emph{real} mail back end. You really send real diary
messsages for real. This means for instance that you can give
-appointements to anybody (provided they use Gnus and @code{nndiary}) by
+appointments to anybody (provided they use Gnus and @code{nndiary}) by
sending the diary message to them as well.
@item
However, since @code{nndiary} also has a @code{request-post} method, you
This variable works the same way as @code{gnus-verbose}, but it applies
to the Gnus back ends instead of Gnus proper.
+@item gnus-add-timestamp-to-message
+@vindex gnus-add-timestamp-to-message
+This variable controls whether to add timestamps to messages that are
+controlled by @code{gnus-verbose} and @code{gnus-verbose-backends} and
+are issued. The default value is @code{nil} which means never to add
+timestamp. If it is @code{log}, add timestamps to only the messages
+that go into the @samp{*Messages*} buffer (in XEmacs, it is the
+@w{@samp{ *Message-Log*}} buffer). If it is neither @code{nil} nor
+@code{log}, add timestamps not only to log messages but also to the ones
+displayed in the echo area.
+
@item nnheader-max-head-length
@vindex nnheader-max-head-length
When the back ends read straight heads of articles, they all try to read
@page
@include gnus-faq.texi
+@node GNU Free Documentation License
+@chapter GNU Free Documentation License
+@include doclicense.texi
+
@node Index
@chapter Index
@printindex cp
projects / gnus / blobdiff