@syncodeindex vr cp
@syncodeindex pg cp
-@documentencoding ISO-8859-1
+@documentencoding UTF-8
@copying
Copyright @copyright{} 1995-2012 Free Software Foundation, Inc.
\begin{document}
% Adjust ../Makefile.in if you change the following line:
-\newcommand{\gnusversionname}{No Gnus v0.20}
+\newcommand{\gnusversionname}{Ma Gnus v0.6}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
luck.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to No Gnus v0.20
+This manual corresponds to Ma Gnus v0.6
@ifnottex
@insertcopying
the program.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to No Gnus v0.20
+This manual corresponds to Ma Gnus v0.6
@heading Other related manuals
@itemize
@item Message manual: Composing messages
@item Emacs-MIME: Composing messages; @acronym{MIME}-specific parts.
@item Sieve: Managing Sieve scripts in Emacs.
-@item PGG: @acronym{PGP/MIME} with Gnus.
+@item EasyPG: @acronym{PGP/MIME} with Gnus.
@item SASL: @acronym{SASL} authentication in Emacs.
@end itemize
* Message:(message). Composing messages.
* Emacs-MIME:(emacs-mime). Composing messages; @acronym{MIME}-specific parts.
* Sieve:(sieve). Managing Sieve scripts in Emacs.
-* PGG:(pgg). @acronym{PGP/MIME} with Gnus.
+* EasyPG:(epa). @acronym{PGP/MIME} with Gnus.
* SASL:(sasl). @acronym{SASL} authentication in Emacs.
@detailmenu
* Direct Functions:: Connecting directly to the server.
* Indirect Functions:: Connecting indirectly to the server.
* Common Variables:: Understood by several connection functions.
-* NNTP marks:: Storing marks for @acronym{NNTP} servers.
Getting Mail
* Formatting Variables:: You can specify what buffers should look like.
* Window Layout:: Configuring the Gnus buffer windows.
* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
* Daemons:: Gnus can do things behind your back.
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
-* No Gnus:: Very punny.
+* No Gnus:: Very punny. Gnus 5.12/5.13
+* Ma Gnus:: Celebrating 25 years of Gnus.
Customization
(setq gnus-secondary-select-methods '((nnmbox "")))
@end lisp
-Note: the @acronym{NNTP} back end stores marks in marks files
-(@pxref{NNTP marks}). This feature makes it easy to share marks between
-several Gnus installations, but may slow down things a bit when fetching
-new articles. @xref{NNTP marks}, for more information.
@node The Server is Down
generated, if @code{(gcc-self . "string")} is present, this string will
be inserted literally as a @code{gcc} header. This parameter takes
precedence over any default @code{Gcc} rules as described later
-(@pxref{Archived Messages}).
+(@pxref{Archived Messages}), with the exception for messages to resend.
@strong{Caveat}: Adding @code{(gcc-self . t)} to the parameter list of
@code{nntp} groups (or the like) isn't valid. An @code{nntp} server
@example
(posting-style
(name "Funky Name")
+ ("X-Message-SMTP-Method" "smtp smtp.example.org 587")
("X-My-Header" "Funky Value")
(signature "Funky Signature"))
@end example
@lisp
(gnus-summary-prepared-hook
- '(lambda nil (local-set-key "d" (local-key-binding "n"))))
+ (lambda nil (local-set-key "d" (local-key-binding "n"))))
@end lisp
when the group is entered, the 'd' key will not mark the article as
named @code{file-name} (a certain coding system of which an alias is
@code{file-name}) in XEmacs.
-The @code{nnml} back end, the @code{nnrss} back end, the @acronym{NNTP}
-marks feature (@pxref{NNTP marks}), the agent, and the cache use
-non-@acronym{ASCII} group names in those files and directories. This
-variable overrides the value of @code{file-name-coding-system} which
-specifies the coding system used when encoding and decoding those file
-names and directory names.
+The @code{nnml} back end, the @code{nnrss} back end, the agent, and
+the cache use non-@acronym{ASCII} group names in those files and
+directories. This variable overrides the value of
+@code{file-name-coding-system} which specifies the coding system used
+when encoding and decoding those file names and directory names.
In XEmacs (with the @code{mule} feature), @code{file-name-coding-system}
is the only means to specify the coding system used to encode and decode
"")))
@end lisp
+To see what variables are dynamically bound (like
+@code{gnus-tmp-group}), you have to look at the source code. The
+variable names aren't guaranteed to be stable over Gnus versions,
+either.
+
@node File Commands
@subsection File Commands
@acronym{ASCII} equivalents (@code{gnus-article-treat-non-ascii}).
This is mostly useful if you're on a terminal that has a limited font
and doesn't show accented characters, ``advanced'' punctuation, and the
-like. For instance, @samp{»} is translated into @samp{>>}, and so on.
+like. For instance, @samp{Ã\82»} is translated into @samp{>>}, and so on.
@item W Y f
@kindex W Y f (Summary)
Also @pxref{Group Parameters}.
-@vindex gnus-propagate-marks
-@item gnus-propagate-marks
-If non-@code{nil}, propagate marks to the backends for possible
-storing. @xref{NNTP marks}, and friends, for a more fine-grained
-sieve.
-
@end table
@xref{Mail Variables, ,Mail Variables,message,Message manual}, for more
information.
+
@node POP before SMTP
@section POP before SMTP
@cindex pop before smtp
-@findex message-smtpmail-send-it
@findex mail-source-touch-pop
-Does your @acronym{ISP} require the @acronym{POP}-before-@acronym{SMTP}
-authentication? It is whether you need to connect to the @acronym{POP}
-mail server within a certain time before sending mails. If so, there is
-a convenient way. To do that, put the following lines in your
-@file{~/.gnus.el} file:
+Does your @acronym{ISP} use @acronym{POP}-before-@acronym{SMTP}
+authentication? This authentication method simply requires you to
+contact the @acronym{POP} server before sending email. To do that,
+put the following lines in your @file{~/.gnus.el} file:
@lisp
-(setq message-send-mail-function 'message-smtpmail-send-it)
(add-hook 'message-send-mail-hook 'mail-source-touch-pop)
@end lisp
@noindent
-It means to let Gnus connect to the @acronym{POP} mail server in advance
-whenever you send a mail. The @code{mail-source-touch-pop} function
-does only a @acronym{POP} authentication according to the value of
-@code{mail-sources} without fetching mails, just before sending a mail.
-Note that you have to use @code{message-smtpmail-send-it} which runs
-@code{message-send-mail-hook} rather than @code{smtpmail-send-it} and
-set the value of @code{mail-sources} for a @acronym{POP} connection
-correctly. @xref{Mail Sources}.
+The @code{mail-source-touch-pop} function does @acronym{POP}
+authentication according to the value of @code{mail-sources} without
+fetching mails, just before sending a mail. @xref{Mail Sources}.
If you have two or more @acronym{POP} mail servers set in
@code{mail-sources}, you may want to specify one of them to
(mail-source-touch-pop))))
@end lisp
+
@node Mail and Post
@section Mail and Post
Gnus provides a few different methods for storing the mail and news you
send. The default method is to use the @dfn{archive virtual server} to
store the messages. If you want to disable this completely, the
-@code{gnus-message-archive-group} variable should be @code{nil}, which
-is the default.
+@code{gnus-message-archive-group} variable should be @code{nil}. The
+default is "sent.%Y-%m", which gives you one archive group per month.
For archiving interesting messages in a group you read, see the
@kbd{B c} (@code{gnus-summary-copy-article}) command (@pxref{Mail
non-@code{nil}, the behavior is the same as @code{all}, but it may be
changed in the future.
+@item gnus-gcc-self-resent-messages
+@vindex gnus-gcc-self-resent-messages
+Like the @code{gcc-self} group parameter, applied only for unmodified
+messages that @code{gnus-summary-resend-message} (@pxref{Summary Mail
+Commands}) resends. Non-@code{nil} value of this variable takes
+precedence over any existing @code{Gcc} header.
+
+If this is @code{none}, no @code{Gcc} copy will be made. If this is
+@code{t}, messages resent will be @code{Gcc} copied to the current
+group. If this is a string, it specifies a group to which resent
+messages will be @code{Gcc} copied. If this is @code{nil}, @code{Gcc}
+will be done according to existing @code{Gcc} header(s), if any. If
+this is @code{no-gcc-self}, that is the default, resent messages will be
+@code{Gcc} copied to groups that existing @code{Gcc} header specifies,
+except for the current group.
+
+@item gnus-gcc-pre-body-encode-hook
+@vindex gnus-gcc-pre-body-encode-hook
+@itemx gnus-gcc-post-body-encode-hook
+@vindex gnus-gcc-post-body-encode-hook
+
+These hooks are run before/after encoding the message body of the Gcc
+copy of a sent message. The current buffer (when the hook is run)
+contains the message including the message header. Changes made to
+the message will only affect the Gcc copy, but not the original
+message. You can use these hooks to edit the copy (and influence
+subsequent transformations), e.g. remove MML secure tags
+(@pxref{Signing and encrypting}).
+
@end table
In the case of a string value, if the @code{match} is a regular
expression, a @samp{gnus-match-substitute-replacement} is proceed on
the value to replace the positional parameters @samp{\@var{n}} by the
-corresponding parenthetical matches (see @xref{Replacing the Text that
-Matched, , Text Replacement, elisp, The Emacs Lisp Reference Manual}.)
+corresponding parenthetical matches (see @xref{Replacing Match,,
+Replacing the Text that Matched, elisp, The Emacs Lisp Reference Manual}.)
@vindex message-reply-headers
(signature-file "~/.work-signature")
(address "user@@bar.foo")
(body "You are fired.\n\nSincerely, your boss.")
+ ("X-Message-SMTP-Method" "smtp smtp.example.org 587")
(organization "Important Work, Inc"))
("nnml:.*"
(From (with-current-buffer gnus-article-buffer
You may also use @code{message-alternative-emails} instead.
@xref{Message Headers, ,Message Headers, message, Message Manual}.
+Of particular interest in the ``work-mail'' style is the
+@samp{X-Message-SMTP-Method} header. It specifies how to send the
+outgoing email. You may want to sent certain emails through certain
+@acronym{SMTP} servers due to company policies, for instance.
+@xref{Mail Variables, ,Message Variables, message, Message Manual}.
+
+
@node Drafts
@section Drafts
@cindex drafts
* Direct Functions:: Connecting directly to the server.
* Indirect Functions:: Connecting indirectly to the server.
* Common Variables:: Understood by several connection functions.
-* NNTP marks:: Storing marks for @acronym{NNTP} servers.
@end menu
@end table
-@node NNTP marks
-@subsubsection NNTP marks
-@cindex storing NNTP marks
-
-Gnus stores marks (@pxref{Marking Articles}) for @acronym{NNTP}
-servers in marks files. A marks file records what marks you have set
-in a group and each file is specific to the corresponding server.
-Marks files are stored in @file{~/News/marks}
-(@code{nntp-marks-directory}) under a classic hierarchy resembling
-that of a news server, for example marks for the group
-@samp{gmane.discuss} on the news.gmane.org server will be stored in
-the file @file{~/News/marks/news.gmane.org/gmane/discuss/.marks}.
-
-Marks files are useful because you can copy the @file{~/News/marks}
-directory (using rsync, scp or whatever) to another Gnus installation,
-and it will realize what articles you have read and marked. The data
-in @file{~/News/marks} has priority over the same data in
-@file{~/.newsrc.eld}.
-
-Note that marks files are very much server-specific: Gnus remembers
-the article numbers so if you don't use the same servers on both
-installations things are most likely to break (most @acronym{NNTP}
-servers do not use the same article numbers as any other server).
-However, if you use servers A, B, C on one installation and servers A,
-D, E on the other, you can sync the marks files for A and then you'll
-get synchronization for that server between the two installations.
-
-Using @acronym{NNTP} marks can possibly incur a performance penalty so
-if Gnus feels sluggish, try setting the @code{nntp-marks-is-evil}
-variable to @code{t}. Marks will then be stored in @file{~/.newsrc.eld}.
-
-Related variables:
-
-@table @code
-
-@item nntp-marks-is-evil
-@vindex nntp-marks-is-evil
-If non-@code{nil}, this back end will ignore any marks files. The
-default is @code{nil}.
-
-@item nntp-marks-directory
-@vindex nntp-marks-directory
-The directory where marks for nntp groups will be stored.
-
-@end table
-
-
@node News Spool
@subsection News Spool
@cindex nnspool
servers that doesn't support that command.
@item nnimap-streaming
-Virtually all @code{IMAP} server support fast streaming of data. If
-you have problems connecting to the server, try setting this to @code{nil}.
+Virtually all @acronym{IMAP} server support fast streaming of data.
+If you have problems connecting to the server, try setting this to
+@code{nil}.
@item nnimap-fetch-partial-articles
If non-@code{nil}, fetch partial articles from the server. If set to
matching types will be fetched. For instance, @samp{"text/"} will
fetch all textual parts, while leaving the rest on the server.
+@item nnimap-record-commands
+If non-@code{nil}, record all @acronym{IMAP} commands in the
+@samp{"*imap log*"} buffer.
+
@end table
@table @code
@item nnimap-inbox
-This is the @acronym{IMAP} mail box that will be scanned for new mail.
+This is the @acronym{IMAP} mail box that will be scanned for new
+mail. This can also be a list of mail box names.
@item nnimap-split-methods
Uses the same syntax as @code{nnmail-split-methods} (@pxref{Splitting
and says what authentication scheme to use. The default is
@code{password}.
+@item :leave
+Non-@code{nil} if the mail is to be left on the @acronym{POP} server
+after fetching. Mails once fetched will never be fetched again by the
+@acronym{UIDL} control. Only the built-in @code{pop3-movemail} program
+(the default) supports this keyword.
+
+If this is neither @code{nil} nor a number, all mails will be left on
+the server. If this is a number, leave mails on the server for this
+many days since you first checked new mails. If this is @code{nil}
+(the default), mails will be deleted on the server right after fetching.
+
+@vindex pop3-uidl-file
+The @code{pop3-uidl-file} variable specifies the file to which the
+@acronym{UIDL} data are locally stored. The default value is
+@file{~/.pop3-uidl}.
+
+Note that @acronym{POP} servers maintain no state information between
+sessions, so what the client believes is there and what is actually
+there may not match up. If they do not, then you may get duplicate
+mails or the whole thing can fall apart and leave you with a corrupt
+mailbox.
+
@end table
-@vindex pop3-movemail
+@findex pop3-movemail
@vindex pop3-leave-mail-on-server
If the @code{:program} and @code{:function} keywords aren't specified,
-@code{pop3-movemail} will be used. If @code{pop3-leave-mail-on-server}
-is non-@code{nil} the mail is to be left on the @acronym{POP} server
-after fetching when using @code{pop3-movemail}. Note that POP servers
-maintain no state information between sessions, so what the client
-believes is there and what is actually there may not match up. If they
-do not, then you may get duplicate mails or the whole thing can fall
-apart and leave you with a corrupt mailbox.
+@code{pop3-movemail} will be used.
Here are some examples for getting mail from a @acronym{POP} server.
+
Fetch from the default @acronym{POP} server, using the default user
name, and default fetcher:
:user "user-name" :password "secret")
@end lisp
+Leave mails on the server for 14 days:
+
+@lisp
+(pop :server "my.pop.server"
+ :user "user-name" :password "secret"
+ :leave 14)
+@end lisp
+
Use @samp{movemail} to move the mail:
@lisp
@acronym{NOV} databases for the incoming mails. This makes it possibly the
fastest back end when it comes to reading mail.
-@cindex self contained nnml servers
-@cindex marks
-When the marks file is used (which it is by default), @code{nnml}
-servers have the property that you may backup them using @code{tar} or
-similar, and later be able to restore them into Gnus (by adding the
-proper @code{nnml} server) and have all your marks be preserved. Marks
-for a group are usually stored in the @code{.marks} file (but see
-@code{nnml-marks-file-name}) within each @code{nnml} group's directory.
-Individual @code{nnml} groups are also possible to backup, use @kbd{G m}
-to restore the group (after restoring the backup into the nnml
-directory).
-
-If for some reason you believe your @file{.marks} files are screwed
-up, you can just delete them all. Gnus will then correctly regenerate
-them next time it starts.
-
Virtual server settings:
@table @code
@vindex nnml-prepare-save-mail-hook
Hook run narrowed to an article before saving.
-@item nnml-marks-is-evil
-@vindex nnml-marks-is-evil
-If non-@code{nil}, this back end will ignore any @sc{marks} files. The
-default is @code{nil}.
-
-@item nnml-marks-file-name
-@vindex nnml-marks-file-name
-The name of the @dfn{marks} files. The default is @file{.marks}.
-
@item nnml-use-compressed-files
@vindex nnml-use-compressed-files
If non-@code{nil}, @code{nnml} will allow using compressed message
@code{nnfolder} will add extra headers to keep track of article
numbers and arrival dates.
-@cindex self contained nnfolder servers
-@cindex marks
-When the marks file is used (which it is by default), @code{nnfolder}
-servers have the property that you may backup them using @code{tar} or
-similar, and later be able to restore them into Gnus (by adding the
-proper @code{nnfolder} server) and have all your marks be preserved.
-Marks for a group are usually stored in a file named as the mbox file
-with @code{.mrk} concatenated to it (but see
-@code{nnfolder-marks-file-suffix}) within the @code{nnfolder}
-directory. Individual @code{nnfolder} groups are also possible to
-backup, use @kbd{G m} to restore the group (after restoring the backup
-into the @code{nnfolder} directory).
-
Virtual server settings:
@table @code
The directory where the @acronym{NOV} files should be stored. If
@code{nil}, @code{nnfolder-directory} is used.
-@item nnfolder-marks-is-evil
-@vindex nnfolder-marks-is-evil
-If non-@code{nil}, this back end will ignore any @sc{marks} files. The
-default is @code{nil}.
-
-@item nnfolder-marks-file-suffix
-@vindex nnfolder-marks-file-suffix
-The extension for @sc{marks} files. The default is @file{.mrk}.
-
-@item nnfolder-marks-directory
-@vindex nnfolder-marks-directory
-The directory where the @sc{marks} files should be stored. If
-@code{nil}, @code{nnfolder-directory} is used.
-
@end table
format to which mail was converted, primarily involving creating a
spool-file-like entity with a scheme for inserting Babyl-specific
headers and status bits above the top of each message in the file.
-Rmail was Emacs' first mail reader, it was written by Richard Stallman,
+Rmail was Emacs's first mail reader, it was written by Richard Stallman,
and Stallman came out of that TOPS/Babyl environment, so he wrote Rmail
to understand the mail files folks already had in existence. Gnus (and
VM, for that matter) continue to support this format because it's
@code{nnmaildir} stores article marks for a given group in the
corresponding maildir, in a way designed so that it's easy to manipulate
them from outside Gnus. You can tar up a maildir, unpack it somewhere
-else, and still have your marks. @code{nnml} also stores marks, but
-it's not as easy to work with them from outside Gnus as with
-@code{nnmaildir}.
+else, and still have your marks.
@code{nnmaildir} uses a significant amount of memory to speed things up.
(It keeps in memory some of the things that @code{nnml} stores in files
might interfere with overwriting data, so you may want to shut down Gnus
before you restore the data.
-It is also possible to archive individual @code{nnml},
-@code{nnfolder}, or @code{nnmaildir} groups, while preserving marks.
-For @code{nnml} or @code{nnmaildir}, you copy all files in the group's
-directory. For @code{nnfolder} you need to copy both the base folder
-file itself (@file{FOO}, say), and the marks file (@file{FOO.mrk} in
-this example). Restoring the group is done with @kbd{G m} from the Group
-buffer. The last step makes Gnus notice the new directory.
-@code{nnmaildir} notices the new directory automatically, so @kbd{G m}
-is unnecessary in that case.
-
@node Web Searches
@subsection Web Searches
@cindex nnweb
@item !
@itemx not
-@itemx ¬
+@itemx Ã\82¬
This logical operator only takes a single argument. It returns the
logical negation of the value of its argument.
(* (abs score)
gnus-score-decay-scale)))))))
(if (and (featurep 'xemacs)
- ;; XEmacs' floor can handle only the floating point
+ ;; XEmacs's floor can handle only the floating point
;; number below the half of the maximum integer.
(> (abs n) (lsh -1 -2)))
(string-to-number
@include emacs-mime.texi
@chapter Sieve
@include sieve.texi
-@chapter PGG
-@include pgg.texi
+@chapter EasyPG
+@include epa.texi
@chapter SASL
@include sasl.texi
@end iflatex
* Formatting Variables:: You can specify what buffers should look like.
* Window Layout:: Configuring the Gnus buffer windows.
* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
* Daemons:: Gnus can do things behind your back.
Ignoring is done first; then cutting; then maxing; and then as the very
last operation, padding.
-If you use lots of these advanced thingies, you'll find that Gnus gets
-quite slow. This can be helped enormously by running @kbd{M-x
-gnus-compile} when you are satisfied with the look of your lines.
-@xref{Compilation}.
-
@node User-Defined Specs
@subsection User-Defined Specs
@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
@cindex %<<, %>>, guillemets
-@c @cindex %<<, %>>, %«, %», guillemets
+@c @cindex %<<, %>>, %Ã\82«, %Ã\82», guillemets
@vindex gnus-balloon-face-0
Text inside the @samp{%<<} and @samp{%>>} specifiers will get the
special @code{balloon-help} property set to
interface.
-@node Compilation
-@section Compilation
-@cindex compilation
-@cindex byte-compilation
-
-@findex gnus-compile
-
-Remember all those line format specification variables?
-@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
-on. Now, Gnus will of course heed whatever these variables are, but,
-unfortunately, changing them will mean a quite significant slow-down.
-(The default values of these variables have byte-compiled functions
-associated with them, while the user-generated versions do not, of
-course.)
-
-To help with this, you can run @kbd{M-x gnus-compile} after you've
-fiddled around with the variables and feel that you're (kind of)
-satisfied. This will result in the new specs being byte-compiled, and
-you'll get top speed again. Gnus will save these compiled specs in the
-@file{.newsrc.eld} file. (User-defined functions aren't compiled by
-this function, though---you should compile them yourself by sticking
-them into the @file{~/.gnus.el} file and byte-compiling that file.)
-
-
@node Mode Lines
@section Mode Lines
@cindex mode lines
If @code{inline}, the textual representation is replaced. If
@code{right}, picons are added right to the textual representation.
+@vindex gnus-picon-properties
+The value of the variable @code{gnus-picon-properties} is a list of
+properties applied to picons.
+
The following variables offer control over where things are located.
@table @code
@cindex Pterodactyl Gnus
@cindex Oort Gnus
@cindex No Gnus
+@cindex Ma Gnus
@cindex Gnus versions
The first ``proper'' release of Gnus 5 was done in November 1995 when it
http://git.gnus.org for details (http://www.gnus.org will be updated
with the information when possible).
+On the January 31th 2012, Ma Gnus was begun.
+
If you happen upon a version of Gnus that has a prefixed name --
``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'',
-``Pterodactyl Gnus'', ``Oort Gnus'', ``No Gnus'' -- don't panic.
-Don't let it know that you're frightened. Back away. Slowly. Whatever
-you do, don't run. Walk away, calmly, until you're out of its reach.
-Find a proper released version of Gnus and snuggle up to that instead.
+``Pterodactyl Gnus'', ``Oort Gnus'', ``No Gnus'', ``Ma Gnus'' -- don't
+panic. Don't let it know that you're frightened. Back away. Slowly.
+Whatever you do, don't run. Walk away, calmly, until you're out of
+its reach. Find a proper released version of Gnus and snuggle up to
+that instead.
@node Why?
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
-* No Gnus:: Very punny.
+* No Gnus:: Very punny. Gnus 5.12/5.13.
+* Ma Gnus:: Celebrating 25 years of Gnus.
@end menu
These lists are, of course, just @emph{short} overviews of the
@include gnus-news.texi
+@node Ma Gnus
+@subsubsection Ma Gnus
+@cindex Ma Gnus
+
+I'm sure there will be lots of text here. It's really spelled 真
+Gnus.
+
+New features in Ma Gnus:
+
+@itemize @bullet
+
+@item Changes in Message mode and related Gnus features
+@c ****************************************************
+
+@itemize @bullet
+
+@item
+The new hooks @code{gnus-gcc-pre-body-encode-hook} and
+@code{gnus-gcc-post-body-encode-hook} are run before/after encoding
+the message body of the Gcc copy of a sent message. See
+@xref{Archived Messages}.
+
+@end itemize
+
+@end itemize
+
@iftex
@page
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
like @c
-@samp{No Gnus v0.20} @c Adjust ../Makefile.in if you change this line!
+@samp{Ma Gnus v0.6} @c Adjust ../Makefile.in if you change this line!
@c
you have the right files loaded. Otherwise you have some old @file{.el}
files lying around. Delete these.
@lisp
(("summary"
- ("win95" -10000 nil s)
+ ("Windows 95" -10000 nil s)
("Gnus"))
("from"
("Lars" -1000))
@c Local Variables:
@c mode: texinfo
-@c coding: iso-8859-1
+@c coding: utf-8
@c End:
projects / gnus / blobdiff