spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Gnus 5.8.5.
+This manual corresponds to Gnus 5.8.7.
@end ifinfo
@findex gnus-group-list-cached
List all groups with cached articles (@code{gnus-group-list-cached}).
+@item A ?
+@kindex A ? (Group)
+@findex gnus-group-list-dormant
+List all groups with dormant articles (@code{gnus-group-list-dormant}).
+
@end table
@vindex gnus-permanently-visible-groups
Groups matching this regexp will always be listed in the group buffer,
whether they are empty or not.
-@end table
+@item gnus-group-name-charset-method-alist
+@vindex gnus-group-name-charset-method-alist
+An alist of method and the charset for group names. It is used to show
+non-ASCII group names.
+
+For example:
+@lisp
+(setq gnus-group-name-charset-method-alist
+ '(((nntp "news.com.cn") . cn-gb-2312)))
+@end lisp
+
+@item gnus-group-name-charset-group-alist
+@vindex gnus-group-name-charset-group-alist
+An alist of regexp of group name and the charset for group names.
+It is used to show non-ASCII group names.
+
+For example:
+@lisp
+(setq gnus-group-name-charset-group-alist
+ '(("\\.com\\.cn:" . cn-gb-2312)))
+@end lisp
+@end table
@node Scanning New Messages
@subsection Scanning New Messages
the process/prefix convention.
@item S o m
+@itemx C-c C-f
@kindex S o m (Summary)
+@kindex C-c C-f (Summary)
@findex gnus-summary-mail-forward
@c @icon{gnus-summary-mail-forward}
Forward the current article to some other person
-(@code{gnus-summary-mail-forward}). If given a prefix, include the full
-headers of the forwarded article.
+(@code{gnus-summary-mail-forward}). If no prefix is given, the message
+is forwarded according to the value of (@code{message-forward-as-mime})
+and (@code{message-forward-show-mml}); if the prefix is 1, decode the
+message and forward directly inline; if the prefix is 2, foward message
+as an rfc822 MIME section; if the prefix is 3, decode message and
+forward as an rfc822 MIME section; if the prefix is 4, foward message
+directly inline; otherwise, the message is forwarded as no prefix given
+but use the flipped value of (@code{message-forward-as-mime}). By
+default, the message is decoded and forwarded as an rfc822 MIME section.
@item S m
@itemx m
@kindex S o p (Summary)
@findex gnus-summary-post-forward
Forward the current article to a newsgroup
-(@code{gnus-summary-post-forward}). If given a prefix, include the full
-headers of the forwarded article.
+(@code{gnus-summary-post-forward}).
+ If no prefix is given, the message is forwarded according to the value
+of (@code{message-forward-as-mime}) and
+(@code{message-forward-show-mml}); if the prefix is 1, decode the
+message and forward directly inline; if the prefix is 2, foward message
+as an rfc822 MIME section; if the prefix is 3, decode message and
+forward as an rfc822 MIME section; if the prefix is 4, foward message
+directly inline; otherwise, the message is forwarded as no prefix given
+but use the flipped value of (@code{message-forward-as-mime}). By
+default, the message is decoded and forwarded as an rfc822 MIME section.
@item S O p
@kindex S O p (Summary)
Gnus if the message in question has a @code{Content-Transfer-Encoding}
header that says that this encoding has been done.
+@item W 6
+@kindex W 6 (Summary)
+@findex gnus-article-de-base64-unreadable
+Treat base64 (@code{gnus-article-de-base64-unreadable}).
+Base64 is one common @sc{mime} encoding employed when sending non-ASCII
+(i. e., 8-bit) articles. Note that the this is usually done
+automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding has
+been done.
+
+@item W Z
+@kindex W Z (Summary)
+@findex gnus-article-decode-HZ
+Treat HZ or HZP (@code{gnus-article-decode-HZ}). HZ (or HZP) is one
+common encoding employed when sending Chinese articles. It typically
+makes strings look like @samp{~@{<:Ky2;S@{#,NpJ)l6HK!#~@}}.
+
+@item W h
+@kindex W h (Summary)
+@findex gnus-article-wash-html
+Treat HTML (@code{gnus-article-wash-html}).
+Note that the this is usually done automatically by Gnus if the message
+in question has a @code{Content-Type} header that says that this type
+has been done.
+
@item W f
@kindex W f (Summary)
@cindex x-face
@table @kbd
@item K b
@kindex K b (Summary)
-Make all the @sc{mime} parts have buttons in from of them. This is
+Make all the @sc{mime} parts have buttons in front of them. This is
mostly useful if you wish to save (or perform other actions) on inlined
parts.
If non-@code{nil}, add a @code{to-list} group parameter to mail groups
that have none when you do a @kbd{a}.
+@item message-send-mail-partially-limit
+@vindex message-send-mail-partially-limit
+The limitation of messages sent as message/partial.
+The lower bound of message size in characters, beyond which the message
+should be sent in several parts. If it is nil, the size is unlimited.
+
@end table
@item directory
Get mail from several files in a directory. This is typically used when
-you have procmail split the incoming mail into several files.
+you have procmail split the incoming mail into several files. Setting
+@code{nnmail-scan-directory-mail-source-once} to non-nil force Gnus to
+scan the mail source only once.
Keywords:
@table @code
@item :path
The path of the directory where the mails are stored. The default is
-@samp{~/Maildir/new}.
+taken from the @code{MAILDIR} environment variable or
+@samp{~/Maildir/}.
+@item :subdirs
+The subdirectories of the Maildir. The default is
+@samp{("new" "cur")}.
-If you sometimes look at your mail through a pop3 daemon before fetching
-them with Gnus, you may also have to fetch your mails from the
-@code{cur} directory inside the maildir, like in the first example
-below.
+@c If you sometimes look at your mail through a pop3 daemon before fetching
+@c them with Gnus, you may also have to fetch your mails from the
+@c @code{cur} directory inside the maildir, like in the first example
+@c below.
You can also get mails from remote hosts (because maildirs don't suffer
from locking problems).
Two example maildir mail sources:
@lisp
-(maildir :path "/home/user-name/Maildir/cur")
+(maildir :path "/home/user-name/Maildir/" :subdirs ("cur" "new"))
@end lisp
@lisp
-(maildir :path "/user@@remotehost.org:~/Maildir/new")
+(maildir :path "/user@@remotehost.org:~/Maildir/" :subdirs ("new"))
@end lisp
@item imap
This variable can also have a function as its value, the function will
be called with the headers narrowed and should return a group where it
-thinks the article should be splitted to.
+thinks the article should be splitted to. See @code{nnimap-split-fancy}.
The splitting code tries to create mailboxes if it need too.
+To allow for different split rules on different virtual servers, and
+even different split rules in different inboxes on the same server,
+the syntax of this variable have been extended along the lines of:
+
+@lisp
+(setq nnimap-split-rule
+ '(("my1server" (".*" (("ding" "ding@@gnus.org")
+ ("junk" "From:.*Simon")))
+ ("my2server" ("INBOX" nnimap-split-fancy))
+ ("my[34]server" (".*" (("private" "To:.*Simon")
+ ("junk" my-junk-func)))))
+@end lisp
+
+The virtual server name is in fact a regexp, so that the same rules
+may apply to several servers. In the example, the servers
+@code{my3server} and @code{my4server} both use the same rules.
+Similarly, the inbox string is also a regexp. The actual splitting
+rules are as before, either a function, or a list with group/regexp or
+group/function elements.
+
Nnmail equivalent: @code{nnmail-split-methods}.
@item nnimap-split-predicate
projects / gnus / blobdiff