\input texinfo
+@include gnus-overrides.texi
+
@setfilename gnus
@settitle Gnus Manual
@syncodeindex fn cp
@documentencoding ISO-8859-1
@copying
-Copyright @copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+Copyright @copyright{} 1995-2011 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
@titlepage
+@ifset WEBHACKDEVEL
+@title Gnus Manual (DEVELOPMENT VERSION)
+@end ifset
+@ifclear WEBHACKDEVEL
@title Gnus Manual
+@end ifclear
@author by Lars Magne Ingebrigtsen
@page
* Composing Messages:: Information on sending mail and news.
* Select Methods:: Gnus reads all messages from various select methods.
* Scoring:: Assigning values to articles.
+* Searching:: Mail and News search engines.
* Various:: General purpose settings.
* The End:: Farewell and goodbye.
* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
Starting Gnus
* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
* The Server is Down:: How can I read my mail then?
* Slave Gnusae:: You can have more than one Gnus active at a time.
* Fetching a Group:: Starting Gnus just to read a group.
* Server Buffer:: Making and editing virtual servers.
* Getting News:: Reading USENET news with Gnus.
-* Using @acronym{IMAP}:: Reading mail from @acronym{IMAP}.
+* Using IMAP:: Reading mail from @acronym{IMAP}.
* Getting Mail:: Reading your personal mail with Gnus.
* Browsing the Web:: Getting messages from a plethora of Web sources.
* Other Sources:: Reading directories, files.
* Anything Groups:: Dired? Who needs dired?
* Document Groups:: Single files can be the basis of a group.
* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+* The Empty Backend:: The backend that never has any news.
Document Groups
* Advanced Scoring Examples:: What they look like.
* Advanced Scoring Tips:: Getting the most out of it.
+Searching
+
+* nnir:: Searching with various engines.
+* nnmairix:: Searching with Mairix.
+
+nnir
+
+* What is nnir?:: What does nnir do.
+* Basic Usage:: How to perform simple searches.
+* Setting up nnir:: How to set up nnir.
+
+Setting up nnir
+
+* Associating Engines:: How to associate engines.
+
Various
* Process/Prefix:: A convention used by many treatment commands.
* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendinitis in ten easy steps!
* Daemons:: Gnus can do things behind your back.
* Undo:: Some actions can be undone.
* Predicate Specifiers:: Specifying predicates.
* Smileys:: Show all those happy faces the way they were
meant to be shown.
* Picons:: How to display pictures of what you're reading.
+* Gravatars:: Display the avatar of people you read.
* XVarious:: Other XEmacsy Gnusey variables.
Thwarting Email Spam
@menu
* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
* The Server is Down:: How can I read my mail then?
* Slave Gnusae:: You can have more than one Gnus active at a time.
* New Groups:: What is Gnus supposed to do with new groups?
If that fails as well, Gnus will try to use the machine running Emacs
as an @acronym{NNTP} server. That's a long shot, though.
-@vindex gnus-nntp-server
-If @code{gnus-nntp-server} is set, this variable will override
-@code{gnus-select-method}. You should therefore set
-@code{gnus-nntp-server} to @code{nil}, which is what it is by default.
-
-@vindex gnus-secondary-servers
-@vindex gnus-nntp-server
-You can also make Gnus prompt you interactively for the name of an
-@acronym{NNTP} server. If you give a non-numerical prefix to @code{gnus}
-(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
-in the @code{gnus-secondary-servers} list (if any). You can also just
-type in the name of any server you feel like visiting. (Note that this
-will set @code{gnus-nntp-server}, which means that if you then @kbd{M-x
-gnus} later in the same Emacs session, Gnus will contact the same
-server.)
-
@findex gnus-group-browse-foreign-server
@kindex B (Group)
However, if you use one @acronym{NNTP} server regularly and are just
new articles. @xref{NNTP marks}, for more information.
-@node The First Time
-@section The First Time
-@cindex first time usage
-
-If no startup files exist (@pxref{Startup Files}), Gnus will try to
-determine what groups should be subscribed by default.
-
-@vindex gnus-default-subscribed-newsgroups
-If the variable @code{gnus-default-subscribed-newsgroups} is set, Gnus
-will subscribe you to just those groups in that list, leaving the rest
-killed. Your system administrator should have set this variable to
-something useful.
-
-Since she hasn't, Gnus will just subscribe you to a few arbitrarily
-picked groups (i.e., @samp{*.newusers}). (@dfn{Arbitrary} is defined
-here as @dfn{whatever Lars thinks you should read}.)
-
-You'll also be subscribed to the Gnus documentation group, which should
-help you with most common problems.
-
-If @code{gnus-default-subscribed-newsgroups} is @code{t}, Gnus will just
-use the normal functions for handling new groups, and not do anything
-special.
-
-
@node The Server is Down
@section The Server is Down
@cindex server errors
more meant for setting some ground rules, while the other variable is
used more for user fiddling. By default this variable makes all new
groups that come from mail back ends (@code{nnml}, @code{nnbabyl},
-@code{nnfolder}, @code{nnmbox}, @code{nnmh}, and @code{nnmaildir})
-subscribed. If you don't like that, just set this variable to
-@code{nil}.
-
-New groups that match this regexp are subscribed using
+@code{nnfolder}, @code{nnmbox}, @code{nnmh}, @code{nnimap}, and
+@code{nnmaildir}) subscribed. If you don't like that, just set this
+variable to @code{nil}.
+
+@vindex gnus-auto-subscribed-categories
+As if that wasn't enough, @code{gnus-auto-subscribed-categories} also
+allows you to specify that new groups should be subcribed based on the
+category their select methods belong to. The default is @samp{(mail
+post-mail)}, meaning that all new groups from mail-like backends
+should be subscribed automatically.
+
+New groups that match these variables are subscribed using
@code{gnus-subscribe-options-newsgroup-method}.
@vindex gnus-no-groups-message
Message displayed by Gnus when no groups are available.
-@item gnus-play-startup-jingle
-@vindex gnus-play-startup-jingle
-If non-@code{nil}, play the Gnus jingle at startup.
-
-@item gnus-startup-jingle
-@vindex gnus-startup-jingle
-Jingle to be played if the above variable is non-@code{nil}. The
-default is @samp{Tuxedomoon.Jingle4.au}.
-
@item gnus-use-backend-marks
@vindex gnus-use-backend-marks
If non-@code{nil}, Gnus will store article marks both in the
* Exiting Gnus:: Stop reading news and get some work done.
* Group Topics:: A folding group mode divided into topics.
* Non-ASCII Group Names:: Accessing groups of non-English names.
-* Searching:: Mail search engines.
* Misc Group Stuff:: Other stuff that you can to do.
@end menu
@section Subscription Commands
@cindex subscription
+The following commands allow for managing your subscriptions in the
+Group buffer. If you want to subscribe to many groups, it's probably
+more convenient to go to the @ref{Server Buffer}, and choose the
+server there using @kbd{RET} or @kbd{SPC}. Then you'll have the
+commands listed in @ref{Browse Foreign Server} at hand.
+
@table @kbd
@item S t
All groups with a level less than or equal to
@code{gnus-group-default-list-level} will be listed in the group buffer
by default.
+This variable can also be a function. In that case, that function will
+be called and the result will be used as value.
+
@vindex gnus-group-list-inactive-groups
If @code{gnus-group-list-inactive-groups} is non-@code{nil}, non-active
@section Foreign Groups
@cindex foreign groups
+If you recall how to subscribe to servers (@pxref{Finding the News})
+you will remember that @code{gnus-secondary-select-methods} and
+@code{gnus-select-method} let you write a definition in Emacs Lisp of
+what servers you want to see when you start up. The alternate
+approach is to use foreign servers and groups. ``Foreign'' here means
+they are not coming from the select methods. All foreign server
+configuration and subscriptions are stored only in the
+@file{~/.newsrc.eld} file.
+
Below are some group mode commands for making and editing general foreign
groups, as well as commands to ease the creation of a few
special-purpose groups. All these commands insert the newly created
Top, sieve, Emacs Sieve}.
@item (agent parameters)
-If the agent has been enabled, you can set any of the its parameters
-to control the behavior of the agent in individual groups. See Agent
+If the agent has been enabled, you can set any of its parameters to
+control the behavior of the agent in individual groups. See Agent
Parameters in @ref{Category Syntax}. Most users will choose to set
agent parameters in either an agent category or group topic to
minimize the configuration effort.
@item u
@kindex u (Browse)
@findex gnus-browse-unsubscribe-current-group
+@vindex gnus-browse-subscribe-newsgroup-method
Unsubscribe to the current group, or, as will be the case here,
-subscribe to it (@code{gnus-browse-unsubscribe-current-group}).
+subscribe to it (@code{gnus-browse-unsubscribe-current-group}). You
+can affect the way the new group is entered into the Group buffer
+using the variable @code{gnus-browse-subscribe-newsgroup-method}. See
+@pxref{Subscription Methods} for available options.
@item l
@itemx q
header will be displayed incorrectly in the article buffer.
-@node Searching
-@section Searching
+@node Misc Group Stuff
+@section Misc Group Stuff
@menu
-* nnir:: Searching on IMAP, with swish, namazu, etc.
-* nnmairix:: Searching maildir, MH or mbox with Mairix.
+* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
+* Group Information:: Information and help on groups and Gnus.
+* Group Timestamp:: Making Gnus keep track of when you last read a group.
+* File Commands:: Reading and writing the Gnus files.
+* Sieve Commands:: Managing Sieve scripts.
@end menu
-@cindex Searching
+@table @kbd
-FIXME: This node is a stub.
+@item v
+@kindex v (Group)
+@cindex keys, reserved for users (Group)
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key. For example:
-FIXME: Add a brief overview of Gnus search capabilities. A brief
-comparison of nnir, nnmairix, contrib/gnus-namazu would be nice
-as well.
+@lisp
+(define-key gnus-group-mode-map (kbd "v j d")
+ (lambda ()
+ (interactive)
+ (gnus-group-jump-to-group "nndraft:drafts")))
+@end lisp
-FIXME: Explain difference to @ref{Searching for Articles}, add reference
-and back-reference.
+On keys reserved for users in Emacs and on keybindings in general
+@xref{Keymaps, Keymaps, , emacs, The Emacs Editor}.
-@node nnir
-@subsection nnir
+@item ^
+@kindex ^ (Group)
+@findex gnus-group-enter-server-mode
+Enter the server buffer (@code{gnus-group-enter-server-mode}).
+@xref{Server Buffer}.
-FIXME: As a first step, convert the commentary of @file{nnir} to texi.
-@cindex nnir
+@item a
+@kindex a (Group)
+@findex gnus-group-post-news
+Start composing a message (a news by default)
+(@code{gnus-group-post-news}). If given a prefix, post to the group
+under the point. If the prefix is 1, prompt for a group to post to.
+Contrary to what the name of this function suggests, the prepared
+article might be a mail instead of a news, if a mail group is specified
+with the prefix argument. @xref{Composing Messages}.
-@node nnmairix
-@subsection nnmairix
+@item m
+@kindex m (Group)
+@findex gnus-group-mail
+Mail a message somewhere (@code{gnus-group-mail}). If given a prefix,
+use the posting style of the group under the point. If the prefix is 1,
+prompt for a group name to find the posting style.
+@xref{Composing Messages}.
-@cindex mairix
-@cindex nnmairix
-This paragraph describes how to set up mairix and the back end
-@code{nnmairix} for indexing and searching your mail from within
-Gnus. Additionally, you can create permanent ``smart'' groups which are
-bound to mairix searches and are automatically updated.
+@item i
+@kindex i (Group)
+@findex gnus-group-news
+Start composing a news (@code{gnus-group-news}). If given a prefix,
+post to the group under the point. If the prefix is 1, prompt
+for group to post to. @xref{Composing Messages}.
-@menu
-* About mairix:: About the mairix mail search engine
-* nnmairix requirements:: What you will need for using nnmairix
-* What nnmairix does:: What does nnmairix actually do?
-* Setting up mairix:: Set up your mairix installation
-* Configuring nnmairix:: Set up the nnmairix back end
-* nnmairix keyboard shortcuts:: List of available keyboard shortcuts
-* Propagating marks:: How to propagate marks from nnmairix groups
-* nnmairix tips and tricks:: Some tips, tricks and examples
-* nnmairix caveats:: Some more stuff you might want to know
-@end menu
+This function actually prepares a news even when using mail groups.
+This is useful for ``posting'' messages to mail groups without actually
+sending them over the network: they're just saved directly to the group
+in question. The corresponding back end must have a request-post method
+for this to work though.
-@c FIXME: The markup in this section might need improvement.
-@c E.g. adding @samp, @var, @file, @command, etc.
-@c Cf. (info "(texinfo)Indicating")
+@item G z
+@kindex G z (Group)
+@findex gnus-group-compact-group
-@node About mairix
-@subsubsection About mairix
+Compact the group under point (@code{gnus-group-compact-group}).
+Currently implemented only in nnml (@pxref{Mail Spool}). This removes
+gaps between article numbers, hence getting a correct total article
+count.
-Mairix is a tool for indexing and searching words in locally stored
-mail. It was written by Richard Curnow and is licensed under the
-GPL. Mairix comes with most popular GNU/Linux distributions, but it also
-runs under Windows (with cygwin), Mac OS X and Solaris. The homepage can
-be found at
-@uref{http://www.rpcurnow.force9.co.uk/mairix/index.html}
+@end table
-Though mairix might not be as flexible as other search tools like
-swish++ or namazu, which you can use via the @code{nnir} back end, it
-has the prime advantage of being incredibly fast. On current systems, it
-can easily search through headers and message bodies of thousands and
-thousands of mails in well under a second. Building the database
-necessary for searching might take a minute or two, but only has to be
-done once fully. Afterwards, the updates are done incrementally and
-therefore are really fast, too. Additionally, mairix is very easy to set
-up.
+Variables for the group buffer:
-For maximum speed though, mairix should be used with mails stored in
-@code{Maildir} or @code{MH} format (this includes the @code{nnml} back
-end), although it also works with mbox. Mairix presents the search
-results by populating a @emph{virtual} maildir/MH folder with symlinks
-which point to the ``real'' message files (if mbox is used, copies are
-made). Since mairix already presents search results in such a virtual
-mail folder, it is very well suited for using it as an external program
-for creating @emph{smart} mail folders, which represent certain mail
-searches.
+@table @code
-@node nnmairix requirements
-@subsubsection nnmairix requirements
+@item gnus-group-mode-hook
+@vindex gnus-group-mode-hook
+is called after the group buffer has been
+created.
-Mairix searches local mail---that means, mairix absolutely must have
-direct access to your mail folders. If your mail resides on another
-server (e.g. an @acronym{IMAP} server) and you happen to have shell
-access, @code{nnmairix} supports running mairix remotely, e.g. via ssh.
+@item gnus-group-prepare-hook
+@vindex gnus-group-prepare-hook
+is called after the group buffer is
+generated. It may be used to modify the buffer in some strange,
+unnatural way.
-Additionally, @code{nnmairix} only supports the following Gnus back
-ends: @code{nnml}, @code{nnmaildir}, and @code{nnimap}. You must use
-one of these back ends for using @code{nnmairix}. Other back ends, like
-@code{nnmbox}, @code{nnfolder} or @code{nnmh}, won't work.
+@item gnus-group-prepared-hook
+@vindex gnus-group-prepare-hook
+is called as the very last thing after the group buffer has been
+generated. It may be used to move point around, for instance.
-If you absolutely must use mbox and still want to use @code{nnmairix},
-you can set up a local @acronym{IMAP} server, which you then access via
-@code{nnimap}. This is a rather massive setup for accessing some mbox
-files, so just change to MH or Maildir already... However, if you're
-really, really passionate about using mbox, you might want to look into
-the package @file{mairix.el}, which comes with Emacs 23.
+@item gnus-permanently-visible-groups
+@vindex gnus-permanently-visible-groups
+Groups matching this regexp will always be listed in the group buffer,
+whether they are empty or not.
-@node What nnmairix does
-@subsubsection What nnmairix does
+@end table
-The back end @code{nnmairix} enables you to call mairix from within Gnus,
-either to query mairix with a search term or to update the
-database. While visiting a message in the summary buffer, you can use
-several pre-defined shortcuts for calling mairix, e.g. to quickly
-search for all mails from the sender of the current message or to
-display the whole thread associated with the message, even if the
-mails are in different folders.
+@node Scanning New Messages
+@subsection Scanning New Messages
+@cindex new messages
+@cindex scanning new news
-Additionally, you can create permanent @code{nnmairix} groups which are bound
-to certain mairix searches. This way, you can easily create a group
-containing mails from a certain sender, with a certain subject line or
-even for one specific thread based on the Message-ID. If you check for
-new mail in these folders (e.g. by pressing @kbd{g} or @kbd{M-g}), they
-automatically update themselves by calling mairix.
+@table @kbd
-You might ask why you need @code{nnmairix} at all, since mairix already
-creates the group, populates it with links to the mails so that you can
-then access it with Gnus, right? Well, this @emph{might} work, but often
-does not---at least not without problems. Most probably you will get
-strange article counts, and sometimes you might see mails which Gnus
-claims have already been canceled and are inaccessible. This is due to
-the fact that Gnus isn't really amused when things are happening behind
-its back. Another problem can be the mail back end itself, e.g. if you
-use mairix with an @acronym{IMAP} server (I had Dovecot complaining
-about corrupt index files when mairix changed the contents of the search
-group). Using @code{nnmairix} should circumvent these problems.
+@item g
+@kindex g (Group)
+@findex gnus-group-get-new-news
+@c @icon{gnus-group-get-new-news}
+Check the server(s) for new articles. If the numerical prefix is used,
+this command will check only groups of level @var{arg} and lower
+(@code{gnus-group-get-new-news}). If given a non-numerical prefix, this
+command will force a total re-reading of the active file(s) from the
+back end(s).
-@code{nnmairix} is not really a mail back end---it's actually more like
-a wrapper, sitting between a ``real'' mail back end where mairix stores
-the searches and the Gnus front end. You can choose between three
-different mail back ends for the mairix folders: @code{nnml},
-@code{nnmaildir} or @code{nnimap}. @code{nnmairix} will call the mairix
-binary so that the search results are stored in folders named
-@code{zz_mairix-<NAME>-<NUMBER>} on this mail back end, but it will
-present these folders in the Gnus front end only with @code{<NAME>}.
-You can use an existing mail back end where you already store your mail,
-but if you're uncomfortable with @code{nnmairix} creating new mail
-groups alongside your other mail, you can also create e.g. a new
-@code{nnmaildir} or @code{nnml} server exclusively for mairix, but then
-make sure those servers do not accidentally receive your new mail
-(@pxref{nnmairix caveats}). A special case exists if you want to use
-mairix remotely on an IMAP server with @code{nnimap}---here the mairix
-folders and your other mail must be on the same @code{nnimap} back end.
+@item M-g
+@kindex M-g (Group)
+@findex gnus-group-get-new-news-this-group
+@vindex gnus-goto-next-group-when-activating
+@c @icon{gnus-group-get-new-news-this-group}
+Check whether new articles have arrived in the current group
+(@code{gnus-group-get-new-news-this-group}).
+@code{gnus-goto-next-group-when-activating} says whether this command is
+to move point to the next group or not. It is @code{t} by default.
-@node Setting up mairix
-@subsubsection Setting up mairix
+@findex gnus-activate-all-groups
+@cindex activating groups
+@item C-c M-g
+@kindex C-c M-g (Group)
+Activate absolutely all groups (@code{gnus-activate-all-groups}).
-First: create a backup of your mail folders (@pxref{nnmairix caveats}).
+@item R
+@kindex R (Group)
+@cindex restarting
+@findex gnus-group-restart
+Restart Gnus (@code{gnus-group-restart}). This saves the @file{.newsrc}
+file(s), closes the connection to all servers, clears up all run-time
+Gnus variables, and then starts Gnus all over again.
-Setting up mairix is easy: simply create a @file{.mairixrc} file with
-(at least) the following entries:
+@end table
-@example
-# Your Maildir/MH base folder
-base=~/Maildir
-@end example
+@vindex gnus-get-new-news-hook
+@code{gnus-get-new-news-hook} is run just before checking for new news.
-This is the base folder for your mails. All the following directories
-are relative to this base folder. If you want to use @code{nnmairix}
-with @code{nnimap}, this base directory has to point to the mail
-directory where the @acronym{IMAP} server stores the mail folders!
+@vindex gnus-after-getting-new-news-hook
+@code{gnus-after-getting-new-news-hook} is run after checking for new
+news.
-@example
-maildir= ... your maildir folders which should be indexed ...
-mh= ... your nnml/mh folders which should be indexed ...
-mbox = ... your mbox files which should be indexed ...
-@end example
-This specifies all your mail folders and mbox files (relative to the
-base directory!) you want to index with mairix. Note that the
-@code{nnml} back end saves mails in MH format, so you have to put those
-directories in the @code{mh} line. See the example at the end of this
-section and mairixrc's man-page for further details.
+@node Group Information
+@subsection Group Information
+@cindex group information
+@cindex information on groups
-@example
-omit=zz_mairix-*
-@end example
+@table @kbd
-@vindex nnmairix-group-prefix
-This should make sure that you don't accidentally index the mairix
-search results. You can change the prefix of these folders with the
-variable @code{nnmairix-group-prefix}.
-@example
-mformat= ... 'maildir' or 'mh' ...
-database= ... location of database file ...
-@end example
+@item H f
+@kindex H f (Group)
+@findex gnus-group-fetch-faq
+@vindex gnus-group-faq-directory
+@cindex FAQ
+@cindex ange-ftp
+Try to fetch the @acronym{FAQ} for the current group
+(@code{gnus-group-fetch-faq}). Gnus will try to get the @acronym{FAQ}
+from @code{gnus-group-faq-directory}, which is usually a directory on
+a remote machine. This variable can also be a list of directories.
+In that case, giving a prefix to this command will allow you to choose
+between the various sites. @code{ange-ftp} (or @code{efs}) will be
+used for fetching the file.
-The @code{format} setting specifies the output format for the mairix
-search folder. Set this to @code{mh} if you want to access search results
-with @code{nnml}. Otherwise choose @code{maildir}.
+If fetching from the first site is unsuccessful, Gnus will attempt to go
+through @code{gnus-group-faq-directory} and try to open them one by one.
-To summarize, here is my shortened @file{.mairixrc} file as an example:
+@item H d
+@itemx C-c C-d
+@c @icon{gnus-group-describe-group}
+@kindex H d (Group)
+@kindex C-c C-d (Group)
+@cindex describing groups
+@cindex group description
+@findex gnus-group-describe-group
+Describe the current group (@code{gnus-group-describe-group}). If given
+a prefix, force Gnus to re-read the description from the server.
-@example
-base=~/Maildir
-maildir=.personal:.work:.logcheck:.sent
-mh=../Mail/nnml/*...
-mbox=../mboxmail/mailarchive_year*
-mformat=maildir
-omit=zz_mairix-*
-database=~/.mairixdatabase
-@end example
+@item M-d
+@kindex M-d (Group)
+@findex gnus-group-describe-all-groups
+Describe all groups (@code{gnus-group-describe-all-groups}). If given a
+prefix, force Gnus to re-read the description file from the server.
-In this case, the base directory is @file{~/Maildir}, where all my Maildir
-folders are stored. As you can see, the folders are separated by
-colons. If you wonder why every folder begins with a dot: this is
-because I use Dovecot as @acronym{IMAP} server, which again uses
-@code{Maildir++} folders. For testing nnmairix, I also have some
-@code{nnml} mail, which is saved in @file{~/Mail/nnml}. Since this has
-to be specified relative to the @code{base} directory, the @code{../Mail}
-notation is needed. Note that the line ends in @code{*...}, which means
-to recursively scan all files under this directory. Without the three
-dots, the wildcard @code{*} will not work recursively. I also have some
-old mbox files with archived mail lying around in @file{~/mboxmail}.
-The other lines should be obvious.
+@item H v
+@itemx V
+@kindex V (Group)
+@kindex H v (Group)
+@cindex version
+@findex gnus-version
+Display current Gnus version numbers (@code{gnus-version}).
-See the man page for @code{mairixrc} for details and further options,
-especially regarding wildcard usage, which may be a little different
-than you are used to.
+@item ?
+@kindex ? (Group)
+@findex gnus-group-describe-briefly
+Give a very short help message (@code{gnus-group-describe-briefly}).
-Now simply call @code{mairix} to create the index for the first time.
-Note that this may take a few minutes, but every following index will do
-the updates incrementally and hence is very fast.
+@item C-c C-i
+@kindex C-c C-i (Group)
+@cindex info
+@cindex manual
+@findex gnus-info-find-node
+Go to the Gnus info node (@code{gnus-info-find-node}).
+@end table
-@node Configuring nnmairix
-@subsubsection Configuring nnmairix
-In group mode, type @kbd{G b c}
-(@code{nnmairix-create-server-and-default-group}). This will ask you for all
-necessary information and create a @code{nnmairix} server as a foreign
-server. You will have to specify the following:
+@node Group Timestamp
+@subsection Group Timestamp
+@cindex timestamps
+@cindex group timestamps
-@itemize @bullet
+It can be convenient to let Gnus keep track of when you last read a
+group. To set the ball rolling, you should add
+@code{gnus-group-set-timestamp} to @code{gnus-select-group-hook}:
-@item
-The @strong{name} of the @code{nnmairix} server---choose whatever you
-want.
+@lisp
+(add-hook 'gnus-select-group-hook 'gnus-group-set-timestamp)
+@end lisp
-@item
-The name of the @strong{back end server} where mairix should store its
-searches. This must be a full server name, like @code{nnml:mymail}.
-Just hit @kbd{TAB} to see the available servers. Currently, servers
-which are accessed through @code{nnmaildir}, @code{nnimap} and
-@code{nnml} are supported. As explained above, for locally stored
-mails, this can be an existing server where you store your mails.
-However, you can also create e.g. a new @code{nnmaildir} or @code{nnml}
-server exclusively for @code{nnmairix} in your secondary select methods
-(@pxref{Finding the News}). If you use a secondary @code{nnml} server
-just for mairix, make sure that you explicitly set the server variable
-@code{nnml-get-new-mail} to @code{nil}, or you might loose mail
-(@pxref{nnmairix caveats}). If you want to use mairix remotely on an
-@acronym{IMAP} server, you have to choose the corresponding
-@code{nnimap} server here.
+After doing this, each time you enter a group, it'll be recorded.
-@item
-@vindex nnmairix-mairix-search-options
-The @strong{command} to call the mairix binary. This will usually just
-be @code{mairix}, but you can also choose something like @code{ssh
-SERVER mairix} if you want to call mairix remotely, e.g. on your
-@acronym{IMAP} server. If you want to add some default options to
-mairix, you could do this here, but better use the variable
-@code{nnmairix-mairix-search-options} instead.
+This information can be displayed in various ways---the easiest is to
+use the @samp{%d} spec in the group line format:
-@item
-The name of the @strong{default search group}. This will be the group
-where all temporary mairix searches are stored, i.e. all searches which
-are not bound to permanent @code{nnmairix} groups. Choose whatever you
-like.
+@lisp
+(setq gnus-group-line-format
+ "%M\%S\%p\%P\%5y: %(%-40,40g%) %d\n")
+@end lisp
-@item
-If the mail back end is @code{nnimap} or @code{nnmaildir}, you will be
-asked if you work with @strong{Maildir++}, i.e. with hidden maildir
-folders (=beginning with a dot). For example, you have to answer
-@samp{yes} here if you work with the Dovecot @acronym{IMAP}
-server. Otherwise, you should answer @samp{no} here.
+This will result in lines looking like:
-@end itemize
+@example
+* 0: mail.ding 19961002T012943
+ 0: custom 19961002T012713
+@end example
-@node nnmairix keyboard shortcuts
-@subsubsection nnmairix keyboard shortcuts
+As you can see, the date is displayed in compact ISO 8601 format. This
+may be a bit too much, so to just display the date, you could say
+something like:
-In group mode:
+@lisp
+(setq gnus-group-line-format
+ "%M\%S\%p\%P\%5y: %(%-40,40g%) %6,6~(cut 2)d\n")
+@end lisp
-@table @kbd
+If you would like greater control of the time format, you can use a
+user-defined format spec. Something like the following should do the
+trick:
-@item G b c
-@kindex G b c (Group)
-@findex nnmairix-create-server-and-default-group
-Creates @code{nnmairix} server and default search group for this server
-(@code{nnmairix-create-server-and-default-group}). You should have done
-this by now (@pxref{Configuring nnmairix}).
+@lisp
+(setq gnus-group-line-format
+ "%M\%S\%p\%P\%5y: %(%-40,40g%) %ud\n")
+(defun gnus-user-format-function-d (headers)
+ (let ((time (gnus-group-timestamp gnus-tmp-group)))
+ (if time
+ (format-time-string "%b %d %H:%M" time)
+ "")))
+@end lisp
-@item G b s
-@kindex G b s (Group)
-@findex nnmairix-search
-Prompts for query which is then sent to the mairix binary. Search
-results are put into the default search group which is automatically
-displayed (@code{nnmairix-search}).
-@item G b m
-@kindex G b m (Group)
-@findex nnmairix-widget-search
-Allows you to create a mairix search or a permanent group more
-comfortably using graphical widgets, similar to a customization
-group. Just try it to see how it works (@code{nnmairix-widget-search}).
+@node File Commands
+@subsection File Commands
+@cindex file commands
-@item G b i
-@kindex G b i (Group)
-@findex nnmairix-search-interactive
-Another command for creating a mairix query more comfortably, but uses
-only the minibuffer (@code{nnmairix-search-interactive}).
+@table @kbd
-@item G b g
-@kindex G b g (Group)
-@findex nnmairix-create-search-group
-Creates a permanent group which is associated with a search query
-(@code{nnmairix-create-search-group}). The @code{nnmairix} back end
-automatically calls mairix when you update this group with @kbd{g} or
-@kbd{M-g}.
+@item r
+@kindex r (Group)
+@findex gnus-group-read-init-file
+@vindex gnus-init-file
+@cindex reading init file
+Re-read the init file (@code{gnus-init-file}, which defaults to
+@file{~/.gnus.el}) (@code{gnus-group-read-init-file}).
-@item G b q
-@kindex G b q (Group)
-@findex nnmairix-group-change-query-this-group
-Changes the search query for the @code{nnmairix} group under cursor
-(@code{nnmairix-group-change-query-this-group}).
+@item s
+@kindex s (Group)
+@findex gnus-group-save-newsrc
+@cindex saving .newsrc
+Save the @file{.newsrc.eld} file (and @file{.newsrc} if wanted)
+(@code{gnus-group-save-newsrc}). If given a prefix, force saving the
+file(s) whether Gnus thinks it is necessary or not.
-@item G b t
-@kindex G b t (Group)
-@findex nnmairix-group-toggle-threads-this-group
-Toggles the 'threads' parameter for the @code{nnmairix} group under cursor,
-i.e. if you want see the whole threads of the found messages
-(@code{nnmairix-group-toggle-threads-this-group}).
+@c @item Z
+@c @kindex Z (Group)
+@c @findex gnus-group-clear-dribble
+@c Clear the dribble buffer (@code{gnus-group-clear-dribble}).
-@item G b u
-@kindex G b u (Group)
-@findex nnmairix-update-database
-@vindex nnmairix-mairix-update-options
-Calls mairix binary for updating the database
-(@code{nnmairix-update-database}). The default parameters are @code{-F}
-and @code{-Q} for making this as fast as possible (see variable
-@code{nnmairix-mairix-update-options} for defining these default
-options).
+@end table
-@item G b r
-@kindex G b r (Group)
-@findex nnmairix-group-toggle-readmarks-this-group
-Keep articles in this @code{nnmairix} group always read or unread, or leave the
-marks unchanged (@code{nnmairix-group-toggle-readmarks-this-group}).
-@item G b d
-@kindex G b d (Group)
-@findex nnmairix-group-delete-recreate-this-group
-Recreate @code{nnmairix} group on the ``real'' mail back end
-(@code{nnmairix-group-delete-recreate-this-group}). You can do this if
-you always get wrong article counts with a @code{nnmairix} group.
+@node Sieve Commands
+@subsection Sieve Commands
+@cindex group sieve commands
-@item G b a
-@kindex G b a (Group)
-@findex nnmairix-group-toggle-allowfast-this-group
-Toggles the @code{allow-fast} parameters for group under cursor
-(@code{nnmairix-group-toggle-allowfast-this-group}). The default
-behavior of @code{nnmairix} is to do a mairix search every time you
-update or enter the group. With the @code{allow-fast} parameter set,
-mairix will only be called when you explicitly update the group, but not
-upon entering. This makes entering the group faster, but it may also
-lead to dangling symlinks if something changed between updating and
-entering the group which is not yet in the mairix database.
+Sieve is a server-side mail filtering language. In Gnus you can use
+the @code{sieve} group parameter (@pxref{Group Parameters}) to specify
+sieve rules that should apply to each group. Gnus provides two
+commands to translate all these group parameters into a proper Sieve
+script that can be transfered to the server somehow.
-@item G b p
-@kindex G b p (Group)
-@findex nnmairix-group-toggle-propmarks-this-group
-Toggle marks propagation for this group
-(@code{nnmairix-group-toggle-propmarks-this-group}). (@pxref{Propagating
-marks}).
+@vindex gnus-sieve-file
+@vindex gnus-sieve-region-start
+@vindex gnus-sieve-region-end
+The generated Sieve script is placed in @code{gnus-sieve-file} (by
+default @file{~/.sieve}). The Sieve code that Gnus generate is placed
+between two delimiters, @code{gnus-sieve-region-start} and
+@code{gnus-sieve-region-end}, so you may write additional Sieve code
+outside these delimiters that will not be removed the next time you
+regenerate the Sieve script.
-@item G b o
-@kindex G b o (Group)
-@findex nnmairix-propagate-marks
-Manually propagate marks (@code{nnmairix-propagate-marks}); needed only when
-@code{nnmairix-propagate-marks-upon-close} is set to @code{nil}.
+@vindex gnus-sieve-crosspost
+The variable @code{gnus-sieve-crosspost} controls how the Sieve script
+is generated. If it is non-@code{nil} (the default) articles is
+placed in all groups that have matching rules, otherwise the article
+is only placed in the group with the first matching rule. For
+example, the group parameter @samp{(sieve address "sender"
+"owner-ding@@hpc.uh.edu")} will generate the following piece of Sieve
+code if @code{gnus-sieve-crosspost} is @code{nil}. (When
+@code{gnus-sieve-crosspost} is non-@code{nil}, it looks the same
+except that the line containing the call to @code{stop} is removed.)
-@end table
+@example
+if address "sender" "owner-ding@@hpc.uh.edu" @{
+ fileinto "INBOX.ding";
+ stop;
+@}
+@end example
-In summary mode:
+@xref{Top, Emacs Sieve, Top, sieve, Emacs Sieve}.
@table @kbd
-@item $ m
-@kindex $ m (Summary)
-@findex nnmairix-widget-search-from-this-article
-Allows you to create a mairix query or group based on the current
-message using graphical widgets (same as @code{nnmairix-widget-search})
-(@code{nnmairix-widget-search-from-this-article}).
+@item D g
+@kindex D g (Group)
+@findex gnus-sieve-generate
+@vindex gnus-sieve-file
+@cindex generating sieve script
+Regenerate a Sieve script from the @code{sieve} group parameters and
+put you into the @code{gnus-sieve-file} without saving it.
-@item $ g
-@kindex $ g (Summary)
-@findex nnmairix-create-search-group-from-message
-Interactively creates a new search group with query based on the current
-message, but uses the minibuffer instead of graphical widgets
-(@code{nnmairix-create-search-group-from-message}).
+@item D u
+@kindex D u (Group)
+@findex gnus-sieve-update
+@vindex gnus-sieve-file
+@cindex updating sieve script
+Regenerates the Gnus managed part of @code{gnus-sieve-file} using the
+@code{sieve} group parameters, save the file and upload it to the
+server using the @code{sieveshell} program.
-@item $ t
-@kindex $ t (Summary)
-@findex nnmairix-search-thread-this-article
-Searches thread for the current article
-(@code{nnmairix-search-thread-this-article}). This is effectively a
-shortcut for calling @code{nnmairix-search} with @samp{m:msgid} of the
-current article and enabled threads.
+@end table
-@item $ f
-@kindex $ f (Summary)
-@findex nnmairix-search-from-this-article
-Searches all messages from sender of the current article
-(@code{nnmairix-search-from-this-article}). This is a shortcut for
-calling @code{nnmairix-search} with @samp{f:From}.
-@item $ o
-@kindex $ o (Summary)
-@findex nnmairix-goto-original-article
-(Only in @code{nnmairix} groups!) Tries determine the group this article
-originally came from and displays the article in this group, so that
-e.g. replying to this article the correct posting styles/group
-parameters are applied (@code{nnmairix-goto-original-article}). This
-function will use the registry if available, but can also parse the
-article file name as a fallback method.
+@node Summary Buffer
+@chapter Summary Buffer
+@cindex summary buffer
-@item $ u
-@kindex $ u (Summary)
-@findex nnmairix-remove-tick-mark-original-article
-Remove possibly existing tick mark from original article
-(@code{nnmairix-remove-tick-mark-original-article}). (@pxref{nnmairix
-tips and tricks}).
+A line for each article is displayed in the summary buffer. You can
+move around, read articles, post articles and reply to articles.
-@end table
+The most common way to a summary buffer is to select a group from the
+group buffer (@pxref{Selecting a Group}).
-@node Propagating marks
-@subsubsection Propagating marks
+You can have as many summary buffers open as you wish.
-First of: you really need a patched mairix binary for using the marks
-propagation feature efficiently. Otherwise, you would have to update
-the mairix database all the time. You can get the patch at
+You can customize the Summary Mode tool bar, see @kbd{M-x
+customize-apropos RET gnus-summary-tool-bar}. This feature is only
+available in Emacs.
-@uref{http://www.randomsample.de/mairix-maildir-patch.tar}
+@kindex v (Summary)
+@cindex keys, reserved for users (Summary)
+The key @kbd{v} is reserved for users. You can bind it to some
+command or better use it as a prefix key. For example:
+@lisp
+(define-key gnus-summary-mode-map (kbd "v -") "LrS") ;; lower subthread
+@end lisp
-You need the mairix v0.21 source code for this patch; everything else
-is explained in the accompanied readme file. If you don't want to use
-marks propagation, you don't have to apply these patches, but they also
-fix some annoyances regarding changing maildir flags, so it might still
-be useful to you.
+@menu
+* Summary Buffer Format:: Deciding how the summary buffer is to look.
+* Summary Maneuvering:: Moving around the summary buffer.
+* Choosing Articles:: Reading articles.
+* Paging the Article:: Scrolling the current article.
+* Reply Followup and Post:: Posting articles.
+* Delayed Articles:: Send articles at a later time.
+* Marking Articles:: Marking articles as read, expirable, etc.
+* Limiting:: You can limit the summary buffer.
+* Threading:: How threads are made.
+* Sorting the Summary Buffer:: How articles and threads are sorted.
+* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
+* Article Caching:: You may store articles in a cache.
+* Persistent Articles:: Making articles expiry-resistant.
+* Sticky Articles:: Article buffers that are not reused.
+* Article Backlog:: Having already read articles hang around.
+* Saving Articles:: Ways of customizing article saving.
+* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
+* Article Treatment:: The article buffer can be mangled at will.
+* MIME Commands:: Doing MIMEy things with the articles.
+* Charsets:: Character set issues.
+* Article Commands:: Doing various things with the article buffer.
+* Summary Sorting:: Sorting the summary buffer in various ways.
+* Finding the Parent:: No child support? Get the parent.
+* Alternative Approaches:: Reading using non-default summaries.
+* Tree Display:: A more visual display of threads.
+* Mail Group Commands:: Some commands can only be used in mail groups.
+* Various Summary Stuff:: What didn't fit anywhere else.
+* Exiting the Summary Buffer:: Returning to the Group buffer,
+ or reselecting the current group.
+* Crosspost Handling:: How crossposted articles are dealt with.
+* Duplicate Suppression:: An alternative when crosspost handling fails.
+* Security:: Decrypt and Verify.
+* Mailing List:: Mailing list minor mode.
+@end menu
-With the patched mairix binary, you can use @code{nnmairix} as an
-alternative to mail splitting (@pxref{Fancy Mail Splitting}). For
-example, instead of splitting all mails from @samp{david@@foobar.com}
-into a group, you can simply create a search group with the query
-@samp{f:david@@foobar.com}. This is actually what ``smart folders'' are
-all about: simply put everything in one mail folder and dynamically
-create searches instead of splitting. This is more flexible, since you
-can dynamically change your folders any time you want to. This also
-implies that you will usually read your mails in the @code{nnmairix}
-groups instead of your ``real'' mail groups.
-There is one problem, though: say you got a new mail from
-@samp{david@@foobar.com}; it will now show up in two groups, the
-``real'' group (your INBOX, for example) and in the @code{nnmairix}
-search group (provided you have updated the mairix database). Now you
-enter the @code{nnmairix} group and read the mail. The mail will be
-marked as read, but only in the @code{nnmairix} group---in the ``real''
-mail group it will be still shown as unread.
+@node Summary Buffer Format
+@section Summary Buffer Format
+@cindex summary buffer format
-You could now catch up the mail group (@pxref{Group Data}), but this is
-tedious and error prone, since you may overlook mails you don't have
-created @code{nnmairix} groups for. Of course, you could first use
-@code{nnmairix-goto-original-article} (@pxref{nnmairix keyboard
-shortcuts}) and then read the mail in the original group, but that's
-even more cumbersome.
+@iftex
+@iflatex
+\gnusfigure{The Summary Buffer}{180}{
+\put(0,0){\epsfig{figure=ps/summary,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-article,width=7.5cm}}}
+}
+@end iflatex
+@end iftex
-Clearly, the easiest way would be if marks could somehow be
-automatically set for the original article. This is exactly what
-@emph{marks propagation} is about.
+@menu
+* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
+* Summary Buffer Mode Line:: You can say how the mode line should look.
+* Summary Highlighting:: Making the summary buffer all pretty and nice.
+@end menu
-Marks propagation is deactivated by default. You can activate it for a
-certain @code{nnmairix} group with
-@code{nnmairix-group-toggle-propmarks-this-group} (bound to @kbd{G b
-p}). This function will warn you if you try to use it with your default
-search group; the reason is that the default search group is used for
-temporary searches, and it's easy to accidentally propagate marks from
-this group. However, you can ignore this warning if you really want to.
-
-With marks propagation enabled, all the marks you set in a @code{nnmairix}
-group should now be propagated to the original article. For example,
-you can now tick an article (by default with @kbd{!}) and this mark should
-magically be set for the original article, too.
-
-A few more remarks which you may or may not want to know:
-
-@vindex nnmairix-propagate-marks-upon-close
-Marks will not be set immediately, but only upon closing a group. This
-not only makes marks propagation faster, it also avoids problems with
-dangling symlinks when dealing with maildir files (since changing flags
-will change the file name). You can also control when to propagate marks
-via @code{nnmairix-propagate-marks-upon-close} (see the doc-string for
-details).
-
-Obviously, @code{nnmairix} will have to look up the original group for every
-article you want to set marks for. If available, @code{nnmairix} will first use
-the registry for determining the original group. The registry is very
-fast, hence you should really, really enable the registry when using
-marks propagation. If you don't have to worry about RAM and disc space,
-set @code{gnus-registry-max-entries} to a large enough value; to be on
-the safe side, choose roughly the amount of mails you index with mairix.
-
-@vindex nnmairix-only-use-registry
-If you don't want to use the registry or the registry hasn't seen the
-original article yet, @code{nnmairix} will use an additional mairix
-search for determining the file name of the article. This, of course, is
-way slower than the registry---if you set hundreds or even thousands of
-marks this way, it might take some time. You can avoid this situation by
-setting @code{nnmairix-only-use-registry} to t.
-
-Maybe you also want to propagate marks the other way round, i.e. if you
-tick an article in a "real" mail group, you'd like to have the same
-article in a @code{nnmairix} group ticked, too. For several good
-reasons, this can only be done efficiently if you use maildir. To
-immediately contradict myself, let me mention that it WON'T work with
-@code{nnmaildir}, since @code{nnmaildir} stores the marks externally and
-not in the file name. Therefore, propagating marks to @code{nnmairix}
-groups will usually only work if you use an IMAP server which uses
-maildir as its file format.
-
-@vindex nnmairix-propagate-marks-to-nnmairix-groups
-If you work with this setup, just set
-@code{nnmairix-propagate-marks-to-nnmairix-groups} to @code{t} and see what
-happens. If you don't like what you see, just set it to @code{nil} again. One
-problem might be that you get a wrong number of unread articles; this
-usually happens when you delete or expire articles in the original
-groups. When this happens, you can recreate the @code{nnmairix} group on the
-back end using @kbd{G b d}.
-
-@node nnmairix tips and tricks
-@subsubsection nnmairix tips and tricks
-
-@itemize
-@item
-Checking Mail
-
-@findex nnmairix-update-groups
-I put all my important mail groups at group level 1. The mairix groups
-have group level 5, so they do not get checked at start up (@pxref{Group
-Levels}).
-
-I use the following to check for mails:
+@findex mail-extract-address-components
+@findex gnus-extract-address-components
+@vindex gnus-extract-address-components
+Gnus will use the value of the @code{gnus-extract-address-components}
+variable as a function for getting the name and address parts of a
+@code{From} header. Two pre-defined functions exist:
+@code{gnus-extract-address-components}, which is the default, quite
+fast, and too simplistic solution; and
+@code{mail-extract-address-components}, which works very nicely, but is
+slower. The default function will return the wrong answer in 5% of the
+cases. If this is unacceptable to you, use the other function instead:
@lisp
-(defun my-check-mail-mairix-update (level)
- (interactive "P")
- ;; if no prefix given, set level=1
- (gnus-group-get-new-news (or level 1))
- (nnmairix-update-groups "mairixsearch" t t)
- (gnus-group-list-groups))
-
-(define-key gnus-group-mode-map "g" 'my-check-mail-mairix-update)
+(setq gnus-extract-address-components
+ 'mail-extract-address-components)
@end lisp
-Instead of @samp{"mairixsearch"} use the name of your @code{nnmairix}
-server. See the doc string for @code{nnmairix-update-groups} for
-details.
-
-@item
-Example: search group for ticked articles
+@vindex gnus-summary-same-subject
+@code{gnus-summary-same-subject} is a string indicating that the current
+article has the same subject as the previous. This string will be used
+with those specs that require it. The default is @code{""}.
-For example, you can create a group for all ticked articles, where the
-articles always stay unread:
-Hit @kbd{G b g}, enter group name (e.g. @samp{important}), use
-@samp{F:f} as query and do not include threads.
+@node Summary Buffer Lines
+@subsection Summary Buffer Lines
-Now activate marks propagation for this group by using @kbd{G b p}. Then
-activate the always-unread feature by using @kbd{G b r} twice.
+@vindex gnus-summary-line-format
+You can change the format of the lines in the summary buffer by changing
+the @code{gnus-summary-line-format} variable. It works along the same
+lines as a normal @code{format} string, with some extensions
+(@pxref{Formatting Variables}).
-So far so good---but how do you remove the tick marks in the @code{nnmairix}
-group? There are two options: You may simply use
-@code{nnmairix-remove-tick-mark-original-article} (bound to @kbd{$ u}) to remove
-tick marks from the original article. The other possibility is to set
-@code{nnmairix-propagate-marks-to-nnmairix-groups} to @code{t}, but see the above
-comments about this option. If it works for you, the tick marks should
-also exist in the @code{nnmairix} group and you can remove them as usual,
-e.g. by marking an article as read.
+There should always be a colon or a point position marker on the line;
+the cursor always moves to the point position marker or the colon after
+performing an operation. (Of course, Gnus wouldn't be Gnus if it wasn't
+possible to change this. Just write a new function
+@code{gnus-goto-colon} which does whatever you like with the cursor.)
+@xref{Positioning Point}.
-When you have removed a tick mark from the original article, this
-article should vanish from the @code{nnmairix} group after you have updated the
-mairix database and updated the group. Fortunately, there is a function
-for doing exactly that: @code{nnmairix-update-groups}. See the previous code
-snippet and the doc string for details.
+The default string is @samp{%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n}.
-@item
-Dealing with auto-subscription of mail groups
+The following format specification characters and extended format
+specification(s) are understood:
-As described before, all @code{nnmairix} groups are in fact stored on
-the mail back end in the form @samp{zz_mairix-<NAME>-<NUMBER>}. You can
-see them when you enter the back end server in the server buffer. You
-should not subscribe these groups! Unfortunately, these groups will
-usually get @emph{auto-subscribed} when you use @code{nnmaildir} or
-@code{nnml}, i.e. you will suddenly see groups of the form
-@samp{zz_mairix*} pop up in your group buffer. If this happens to you,
-simply kill these groups with C-k. For avoiding this, turn off
-auto-subscription completely by setting the variable
-@code{gnus-auto-subscribed-groups} to @code{nil} (@pxref{Filtering New
-Groups}), or if you like to keep this feature use the following kludge
-for turning it off for all groups beginning with @samp{zz_}:
+@table @samp
+@item N
+Article number.
+@item S
+Subject string. List identifiers stripped,
+@code{gnus-list-identifiers}. @xref{Article Hiding}.
+@item s
+Subject if the article is the root of the thread or the previous article
+had a different subject, @code{gnus-summary-same-subject} otherwise.
+(@code{gnus-summary-same-subject} defaults to @code{""}.)
+@item F
+Full @code{From} header.
+@item n
+The name (from the @code{From} header).
+@item f
+The name, @code{To} header or the @code{Newsgroups} header (@pxref{To
+From Newsgroups}).
+@item a
+The name (from the @code{From} header). This differs from the @code{n}
+spec in that it uses the function designated by the
+@code{gnus-extract-address-components} variable, which is slower, but
+may be more thorough.
+@item A
+The address (from the @code{From} header). This works the same way as
+the @code{a} spec.
+@item L
+Number of lines in the article.
+@item c
+Number of characters in the article. This specifier is not supported
+in some methods (like nnfolder).
+@item k
+Pretty-printed version of the number of characters in the article;
+for example, @samp{1.2k} or @samp{0.4M}.
+@item I
+Indentation based on thread level (@pxref{Customizing Threading}).
+@item B
+A complex trn-style thread tree, showing response-connecting trace
+lines. A thread could be drawn like this:
-@lisp
-(setq gnus-auto-subscribed-groups
- "^\\(nnml\\|nnfolder\\|nnmbox\\|nnmh\\|nnbabyl\\|nnmaildir\\).*:\\([^z]\\|z$\\|\\z[^z]\\|zz$\\|zz[^_]\\|zz_$\\).*")
-@end lisp
+@example
+>
++->
+| +->
+| | \->
+| | \->
+| \->
++->
+\->
+@end example
-@end itemize
+You can customize the appearance with the following options. Note
+that it is possible to make the thread display look really neat by
+replacing the default @acronym{ASCII} characters with graphic
+line-drawing glyphs.
+@table @code
+@item gnus-sum-thread-tree-root
+@vindex gnus-sum-thread-tree-root
+Used for the root of a thread. If @code{nil}, use subject
+instead. The default is @samp{> }.
-@node nnmairix caveats
-@subsubsection nnmairix caveats
+@item gnus-sum-thread-tree-false-root
+@vindex gnus-sum-thread-tree-false-root
+Used for the false root of a thread (@pxref{Loose Threads}). If
+@code{nil}, use subject instead. The default is @samp{> }.
-@itemize
-@item
-You can create a secondary @code{nnml} server just for nnmairix, but then
-you have to explicitly set the corresponding server variable
-@code{nnml-get-new-mail} to @code{nil}. Otherwise, new mail might get
-put into this secondary server (and would never show up again). Here's
-an example server definition:
+@item gnus-sum-thread-tree-single-indent
+@vindex gnus-sum-thread-tree-single-indent
+Used for a thread with just one message. If @code{nil}, use subject
+instead. The default is @samp{}.
-@lisp
-(nnml "mairix" (nnml-directory "mairix") (nnml-get-new-mail nil))
-@end lisp
+@item gnus-sum-thread-tree-vertical
+@vindex gnus-sum-thread-tree-vertical
+Used for drawing a vertical line. The default is @samp{| }.
-(The @code{nnmaildir} back end also has a server variabe
-@code{get-new-mail}, but its default value is @code{nil}, so you don't
-have to explicitly set it if you use a @code{nnmaildir} server just for
-mairix.)
+@item gnus-sum-thread-tree-indent
+@vindex gnus-sum-thread-tree-indent
+Used for indenting. The default is @samp{ }.
-@item
-If you use the Gnus registry: don't use the registry with
-@code{nnmairix} groups (put them in
-@code{gnus-registry-unfollowed-groups}). Be @emph{extra careful} if
-you use @code{gnus-registry-split-fancy-with-parent}; mails which are
-split into @code{nnmairix} groups are usually gone for good as soon as
-you check the group for new mail (yes, it has happened to me...).
+@item gnus-sum-thread-tree-leaf-with-other
+@vindex gnus-sum-thread-tree-leaf-with-other
+Used for a leaf with brothers. The default is @samp{+-> }.
-@item
-Therefore: @emph{Never ever} put ``real'' mails into @code{nnmairix}
-groups (you shouldn't be able to, anyway).
+@item gnus-sum-thread-tree-single-leaf
+@vindex gnus-sum-thread-tree-single-leaf
+Used for a leaf without brothers. The default is @samp{\-> }
-@item
-If you use the Gnus agent (@pxref{Gnus Unplugged}): don't agentize
-@code{nnmairix} groups (though I have no idea what happens if you do).
+@end table
-@item
-mairix does only support us-ascii characters.
+@item T
+Nothing if the article is a root and lots of spaces if it isn't (it
+pushes everything after it off the screen).
+@item [
+Opening bracket, which is normally @samp{[}, but can also be @samp{<}
+for adopted articles (@pxref{Customizing Threading}).
+@item ]
+Closing bracket, which is normally @samp{]}, but can also be @samp{>}
+for adopted articles.
+@item >
+One space for each thread level.
+@item <
+Twenty minus thread level spaces.
+@item U
+Unread. @xref{Read Articles}.
-@item
-@code{nnmairix} uses a rather brute force method to force Gnus to
-completely reread the group on the mail back end after mairix was
-called---it simply deletes and re-creates the group on the mail
-back end. So far, this has worked for me without any problems, and I
-don't see how @code{nnmairix} could delete other mail groups than its
-own, but anyway: you really should have a backup of your mail
-folders.
+@item R
+This misleadingly named specifier is the @dfn{secondary mark}. This
+mark will say whether the article has been replied to, has been cached,
+or has been saved. @xref{Other Marks}.
-@item
-All necessary information is stored in the group parameters
-(@pxref{Group Parameters}). This has the advantage that no active file
-is needed, but also implies that when you kill a @code{nnmairix} group,
-it is gone for good.
+@item i
+Score as a number (@pxref{Scoring}).
+@item z
+@vindex gnus-summary-zcore-fuzz
+Zcore, @samp{+} if above the default level and @samp{-} if below the
+default level. If the difference between
+@code{gnus-summary-default-score} and the score is less than
+@code{gnus-summary-zcore-fuzz}, this spec will not be used.
+@item V
+Total thread score.
+@item x
+@code{Xref}.
+@item D
+@code{Date}.
+@item d
+The @code{Date} in @code{DD-MMM} format.
+@item o
+The @code{Date} in @var{YYYYMMDD}@code{T}@var{HHMMSS} format.
+@item M
+@code{Message-ID}.
+@item r
+@code{References}.
+@item t
+Number of articles in the current sub-thread. Using this spec will slow
+down summary buffer generation somewhat.
+@item e
+An @samp{=} (@code{gnus-not-empty-thread-mark}) will be displayed if the
+article has any children.
+@item P
+The line number.
+@item O
+Download mark.
+@item *
+Desired cursor position (instead of after first colon).
+@item &user-date;
+Age sensitive date format. Various date format is defined in
+@code{gnus-summary-user-date-format-alist}.
+@item u
+User defined specifier. The next character in the format string should
+be a letter. Gnus will call the function
+@code{gnus-user-format-function-@var{x}}, where @var{x} is the letter
+following @samp{%u}. The function will be passed the current header as
+argument. The function should return a string, which will be inserted
+into the summary just like information from any other summary specifier.
+@end table
-@item
-@findex nnmairix-purge-old-groups
-If you create and kill a lot of @code{nnmairix} groups, the
-``zz_mairix-*'' groups will accumulate on the mail back end server. To
-delete old groups which are no longer needed, call
-@code{nnmairix-purge-old-groups}. Note that this assumes that you don't
-save any ``real'' mail in folders of the form
-@code{zz_mairix-<NAME>-<NUMBER>}. You can change the prefix of
-@code{nnmairix} groups by changing the variable
-@code{nnmairix-group-prefix}.
+Text between @samp{%(} and @samp{%)} will be highlighted with
+@code{gnus-mouse-face} when the mouse point is placed inside the area.
+There can only be one such area.
-@item
-The following only applies if you @emph{don't} use the mentioned patch
-for mairix (@pxref{Propagating marks}):
+The @samp{%U} (status), @samp{%R} (replied) and @samp{%z} (zcore) specs
+have to be handled with care. For reasons of efficiency, Gnus will
+compute what column these characters will end up in, and ``hard-code''
+that. This means that it is invalid to have these specs after a
+variable-length spec. Well, you might not be arrested, but your summary
+buffer will look strange, which is bad enough.
-A problem can occur when using @code{nnmairix} with maildir folders and
-comes with the fact that maildir stores mail flags like @samp{Seen} or
-@samp{Replied} by appending chars @samp{S} and @samp{R} to the message
-file name, respectively. This implies that currently you would have to
-update the mairix database not only when new mail arrives, but also when
-mail flags are changing. The same applies to new mails which are indexed
-while they are still in the @samp{new} folder but then get moved to
-@samp{cur} when Gnus has seen the mail. If you don't update the database
-after this has happened, a mairix query can lead to symlinks pointing to
-non-existing files. In Gnus, these messages will usually appear with
-``(none)'' entries in the header and can't be accessed. If this happens
-to you, using @kbd{G b u} and updating the group will usually fix this.
+The smart choice is to have these specs as far to the left as possible.
+(Isn't that the case with everything, though? But I digress.)
-@end itemize
+This restriction may disappear in later versions of Gnus.
-@node Misc Group Stuff
-@section Misc Group Stuff
-@menu
-* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
-* Group Information:: Information and help on groups and Gnus.
-* Group Timestamp:: Making Gnus keep track of when you last read a group.
-* File Commands:: Reading and writing the Gnus files.
-* Sieve Commands:: Managing Sieve scripts.
-@end menu
+@node To From Newsgroups
+@subsection To From Newsgroups
+@cindex To
+@cindex Newsgroups
-@table @kbd
+In some groups (particularly in archive groups), the @code{From} header
+isn't very interesting, since all the articles there are written by
+you. To display the information in the @code{To} or @code{Newsgroups}
+headers instead, you need to decide three things: What information to
+gather; where to display it; and when to display it.
-@item v
-@kindex v (Group)
-@cindex keys, reserved for users (Group)
-The key @kbd{v} is reserved for users. You can bind it to some
-command or better use it as a prefix key. For example:
+@enumerate
+@item
+@vindex gnus-extra-headers
+The reading of extra header information is controlled by the
+@code{gnus-extra-headers}. This is a list of header symbols. For
+instance:
@lisp
-(define-key gnus-group-mode-map (kbd "v j d")
- (lambda ()
- (interactive)
- (gnus-group-jump-to-group "nndraft:drafts")))
+(setq gnus-extra-headers
+ '(To Newsgroups X-Newsreader))
@end lisp
-On keys reserved for users in Emacs and on keybindings in general
-@xref{Keymaps, Keymaps, , emacs, The Emacs Editor}.
-
-@item ^
-@kindex ^ (Group)
-@findex gnus-group-enter-server-mode
-Enter the server buffer (@code{gnus-group-enter-server-mode}).
-@xref{Server Buffer}.
+This will result in Gnus trying to obtain these three headers, and
+storing it in header structures for later easy retrieval.
-@item a
-@kindex a (Group)
-@findex gnus-group-post-news
-Start composing a message (a news by default)
-(@code{gnus-group-post-news}). If given a prefix, post to the group
-under the point. If the prefix is 1, prompt for a group to post to.
-Contrary to what the name of this function suggests, the prepared
-article might be a mail instead of a news, if a mail group is specified
-with the prefix argument. @xref{Composing Messages}.
+@item
+@findex gnus-extra-header
+The value of these extra headers can be accessed via the
+@code{gnus-extra-header} function. Here's a format line spec that will
+access the @code{X-Newsreader} header:
-@item m
-@kindex m (Group)
-@findex gnus-group-mail
-Mail a message somewhere (@code{gnus-group-mail}). If given a prefix,
-use the posting style of the group under the point. If the prefix is 1,
-prompt for a group name to find the posting style.
-@xref{Composing Messages}.
+@example
+"%~(form (gnus-extra-header 'X-Newsreader))@@"
+@end example
-@item i
-@kindex i (Group)
-@findex gnus-group-news
-Start composing a news (@code{gnus-group-news}). If given a prefix,
-post to the group under the point. If the prefix is 1, prompt
-for group to post to. @xref{Composing Messages}.
+@item
+@vindex gnus-ignored-from-addresses
+The @code{gnus-ignored-from-addresses} variable says when the @samp{%f}
+summary line spec returns the @code{To}, @code{Newsreader} or
+@code{From} header. If this regexp matches the contents of the
+@code{From} header, the value of the @code{To} or @code{Newsreader}
+headers are used instead.
-This function actually prepares a news even when using mail groups.
-This is useful for ``posting'' messages to mail groups without actually
-sending them over the network: they're just saved directly to the group
-in question. The corresponding back end must have a request-post method
-for this to work though.
+To distinguish regular articles from those where the @code{From} field
+has been swapped, a string is prefixed to the @code{To} or
+@code{Newsgroups} header in the summary line. By default the string is
+@samp{-> } for @code{To} and @samp{=> } for @code{Newsgroups}, you can
+customize these strings with @code{gnus-summary-to-prefix} and
+@code{gnus-summary-newsgroup-prefix}.
-@item G z
-@kindex G z (Group)
-@findex gnus-group-compact-group
+@end enumerate
-Compact the group under point (@code{gnus-group-compact-group}).
-Currently implemented only in nnml (@pxref{Mail Spool}). This removes
-gaps between article numbers, hence getting a correct total article
-count.
+@vindex nnmail-extra-headers
+A related variable is @code{nnmail-extra-headers}, which controls when
+to include extra headers when generating overview (@acronym{NOV}) files.
+If you have old overview files, you should regenerate them after
+changing this variable, by entering the server buffer using @kbd{^},
+and then @kbd{g} on the appropriate mail server (e.g. nnml) to cause
+regeneration.
-@end table
+@vindex gnus-summary-line-format
+You also have to instruct Gnus to display the data by changing the
+@code{%n} spec to the @code{%f} spec in the
+@code{gnus-summary-line-format} variable.
-Variables for the group buffer:
+In summary, you'd typically put something like the following in
+@file{~/.gnus.el}:
-@table @code
+@lisp
+(setq gnus-extra-headers
+ '(To Newsgroups))
+(setq nnmail-extra-headers gnus-extra-headers)
+(setq gnus-summary-line-format
+ "%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n")
+(setq gnus-ignored-from-addresses
+ "Your Name Here")
+@end lisp
-@item gnus-group-mode-hook
-@vindex gnus-group-mode-hook
-is called after the group buffer has been
-created.
+(The values listed above are the default values in Gnus. Alter them
+to fit your needs.)
-@item gnus-group-prepare-hook
-@vindex gnus-group-prepare-hook
-is called after the group buffer is
-generated. It may be used to modify the buffer in some strange,
-unnatural way.
+A note for news server administrators, or for users who wish to try to
+convince their news server administrator to provide some additional
+support:
-@item gnus-group-prepared-hook
-@vindex gnus-group-prepare-hook
-is called as the very last thing after the group buffer has been
-generated. It may be used to move point around, for instance.
-
-@item gnus-permanently-visible-groups
-@vindex gnus-permanently-visible-groups
-Groups matching this regexp will always be listed in the group buffer,
-whether they are empty or not.
-
-@end table
+The above is mostly useful for mail groups, where you have control over
+the @acronym{NOV} files that are created. However, if you can persuade your
+nntp admin to add (in the usual implementation, notably INN):
-@node Scanning New Messages
-@subsection Scanning New Messages
-@cindex new messages
-@cindex scanning new news
+@example
+Newsgroups:full
+@end example
-@table @kbd
+to the end of her @file{overview.fmt} file, then you can use that just
+as you would the extra headers from the mail groups.
-@item g
-@kindex g (Group)
-@findex gnus-group-get-new-news
-@c @icon{gnus-group-get-new-news}
-Check the server(s) for new articles. If the numerical prefix is used,
-this command will check only groups of level @var{arg} and lower
-(@code{gnus-group-get-new-news}). If given a non-numerical prefix, this
-command will force a total re-reading of the active file(s) from the
-back end(s).
-@item M-g
-@kindex M-g (Group)
-@findex gnus-group-get-new-news-this-group
-@vindex gnus-goto-next-group-when-activating
-@c @icon{gnus-group-get-new-news-this-group}
-Check whether new articles have arrived in the current group
-(@code{gnus-group-get-new-news-this-group}).
-@code{gnus-goto-next-group-when-activating} says whether this command is
-to move point to the next group or not. It is @code{t} by default.
+@node Summary Buffer Mode Line
+@subsection Summary Buffer Mode Line
-@findex gnus-activate-all-groups
-@cindex activating groups
-@item C-c M-g
-@kindex C-c M-g (Group)
-Activate absolutely all groups (@code{gnus-activate-all-groups}).
+@vindex gnus-summary-mode-line-format
+You can also change the format of the summary mode bar (@pxref{Mode Line
+Formatting}). Set @code{gnus-summary-mode-line-format} to whatever you
+like. The default is @samp{Gnus: %%b [%A] %Z}.
-@item R
-@kindex R (Group)
-@cindex restarting
-@findex gnus-group-restart
-Restart Gnus (@code{gnus-group-restart}). This saves the @file{.newsrc}
-file(s), closes the connection to all servers, clears up all run-time
-Gnus variables, and then starts Gnus all over again.
+Here are the elements you can play with:
+@table @samp
+@item G
+Group name.
+@item p
+Unprefixed group name.
+@item A
+Current article number.
+@item z
+Current article score.
+@item V
+Gnus version.
+@item U
+Number of unread articles in this group.
+@item e
+Number of unread articles in this group that aren't displayed in the
+summary buffer.
+@item Z
+A string with the number of unread and unselected articles represented
+either as @samp{<%U(+%e) more>} if there are both unread and unselected
+articles, and just as @samp{<%U more>} if there are just unread articles
+and no unselected ones.
+@item g
+Shortish group name. For instance, @samp{rec.arts.anime} will be
+shortened to @samp{r.a.anime}.
+@item S
+Subject of the current article.
+@item u
+User-defined spec (@pxref{User-Defined Specs}).
+@item s
+Name of the current score file (@pxref{Scoring}).
+@item d
+Number of dormant articles (@pxref{Unread Articles}).
+@item t
+Number of ticked articles (@pxref{Unread Articles}).
+@item r
+Number of articles that have been marked as read in this session.
+@item E
+Number of articles expunged by the score files.
@end table
-@vindex gnus-get-new-news-hook
-@code{gnus-get-new-news-hook} is run just before checking for new news.
-
-@vindex gnus-after-getting-new-news-hook
-@code{gnus-after-getting-new-news-hook} is run after checking for new
-news.
-
-@node Group Information
-@subsection Group Information
-@cindex group information
-@cindex information on groups
+@node Summary Highlighting
+@subsection Summary Highlighting
-@table @kbd
+@table @code
+@item gnus-visual-mark-article-hook
+@vindex gnus-visual-mark-article-hook
+This hook is run after selecting an article. It is meant to be used for
+highlighting the article in some way. It is not run if
+@code{gnus-visual} is @code{nil}.
-@item H f
-@kindex H f (Group)
-@findex gnus-group-fetch-faq
-@vindex gnus-group-faq-directory
-@cindex FAQ
-@cindex ange-ftp
-Try to fetch the @acronym{FAQ} for the current group
-(@code{gnus-group-fetch-faq}). Gnus will try to get the @acronym{FAQ}
-from @code{gnus-group-faq-directory}, which is usually a directory on
-a remote machine. This variable can also be a list of directories.
-In that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} (or @code{efs}) will be
-used for fetching the file.
+@item gnus-summary-update-hook
+@vindex gnus-summary-update-hook
+This hook is called when a summary line is changed. It is not run if
+@code{gnus-visual} is @code{nil}.
-If fetching from the first site is unsuccessful, Gnus will attempt to go
-through @code{gnus-group-faq-directory} and try to open them one by one.
+@item gnus-summary-selected-face
+@vindex gnus-summary-selected-face
+This is the face (or @dfn{font} as some people call it) used to
+highlight the current article in the summary buffer.
-@item H C
-@kindex H C (Group)
-@findex gnus-group-fetch-control
-@vindex gnus-group-fetch-control-use-browse-url
-@cindex control message
-Fetch the control messages for the group from the archive at
-@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
-group if given a prefix argument.
+@item gnus-summary-highlight
+@vindex gnus-summary-highlight
+Summary lines are highlighted according to this variable, which is a
+list where the elements are of the format @code{(@var{form}
+. @var{face})}. If you would, for instance, like ticked articles to be
+italic and high-scored articles to be bold, you could set this variable
+to something like
+@lisp
+(((eq mark gnus-ticked-mark) . italic)
+ ((> score default) . bold))
+@end lisp
+As you may have guessed, if @var{form} returns a non-@code{nil} value,
+@var{face} will be applied to the line.
+@end table
-If @code{gnus-group-fetch-control-use-browse-url} is non-@code{nil},
-Gnus will open the control messages in a browser using
-@code{browse-url}. Otherwise they are fetched using @code{ange-ftp}
-and displayed in an ephemeral group.
-Note that the control messages are compressed. To use this command
-you need to turn on @code{auto-compression-mode} (@pxref{Compressed
-Files, ,Compressed Files, emacs, The Emacs Manual}).
+@node Summary Maneuvering
+@section Summary Maneuvering
+@cindex summary movement
-@item H d
-@itemx C-c C-d
-@c @icon{gnus-group-describe-group}
-@kindex H d (Group)
-@kindex C-c C-d (Group)
-@cindex describing groups
-@cindex group description
-@findex gnus-group-describe-group
-Describe the current group (@code{gnus-group-describe-group}). If given
-a prefix, force Gnus to re-read the description from the server.
+All the straight movement commands understand the numeric prefix and
+behave pretty much as you'd expect.
-@item M-d
-@kindex M-d (Group)
-@findex gnus-group-describe-all-groups
-Describe all groups (@code{gnus-group-describe-all-groups}). If given a
-prefix, force Gnus to re-read the description file from the server.
+None of these commands select articles.
-@item H v
-@itemx V
-@kindex V (Group)
-@kindex H v (Group)
-@cindex version
-@findex gnus-version
-Display current Gnus version numbers (@code{gnus-version}).
+@table @kbd
+@item G M-n
+@itemx M-n
+@kindex M-n (Summary)
+@kindex G M-n (Summary)
+@findex gnus-summary-next-unread-subject
+Go to the next summary line of an unread article
+(@code{gnus-summary-next-unread-subject}).
-@item ?
-@kindex ? (Group)
-@findex gnus-group-describe-briefly
-Give a very short help message (@code{gnus-group-describe-briefly}).
+@item G M-p
+@itemx M-p
+@kindex M-p (Summary)
+@kindex G M-p (Summary)
+@findex gnus-summary-prev-unread-subject
+Go to the previous summary line of an unread article
+(@code{gnus-summary-prev-unread-subject}).
-@item C-c C-i
-@kindex C-c C-i (Group)
-@cindex info
-@cindex manual
-@findex gnus-info-find-node
-Go to the Gnus info node (@code{gnus-info-find-node}).
+@item G g
+@kindex G g (Summary)
+@findex gnus-summary-goto-subject
+Ask for an article number and then go to the summary line of that article
+without displaying the article (@code{gnus-summary-goto-subject}).
@end table
+If Gnus asks you to press a key to confirm going to the next group, you
+can use the @kbd{C-n} and @kbd{C-p} keys to move around the group
+buffer, searching for the next group to read without actually returning
+to the group buffer.
-@node Group Timestamp
-@subsection Group Timestamp
-@cindex timestamps
-@cindex group timestamps
+Variables related to summary movement:
-It can be convenient to let Gnus keep track of when you last read a
-group. To set the ball rolling, you should add
-@code{gnus-group-set-timestamp} to @code{gnus-select-group-hook}:
+@table @code
-@lisp
-(add-hook 'gnus-select-group-hook 'gnus-group-set-timestamp)
-@end lisp
+@vindex gnus-auto-select-next
+@item gnus-auto-select-next
+If you issue one of the movement commands (like @kbd{n}) and there are
+no more unread articles after the current one, Gnus will offer to go to
+the next group. If this variable is @code{t} and the next group is
+empty, Gnus will exit summary mode and return to the group buffer. If
+this variable is neither @code{t} nor @code{nil}, Gnus will select the
+next group with unread articles. As a special case, if this variable
+is @code{quietly}, Gnus will select the next group without asking for
+confirmation. If this variable is @code{almost-quietly}, the same
+will happen only if you are located on the last article in the group.
+Finally, if this variable is @code{slightly-quietly}, the @kbd{Z n}
+command will go to the next group without confirmation. Also
+@pxref{Group Levels}.
-After doing this, each time you enter a group, it'll be recorded.
+@item gnus-auto-select-same
+@vindex gnus-auto-select-same
+If non-@code{nil}, all the movement commands will try to go to the next
+article with the same subject as the current. (@dfn{Same} here might
+mean @dfn{roughly equal}. See @code{gnus-summary-gather-subject-limit}
+for details (@pxref{Customizing Threading}).) If there are no more
+articles with the same subject, go to the first unread article.
-This information can be displayed in various ways---the easiest is to
-use the @samp{%d} spec in the group line format:
+This variable is not particularly useful if you use a threaded display.
-@lisp
-(setq gnus-group-line-format
- "%M\%S\%p\%P\%5y: %(%-40,40g%) %d\n")
-@end lisp
-
-This will result in lines looking like:
+@item gnus-summary-check-current
+@vindex gnus-summary-check-current
+If non-@code{nil}, all the ``unread'' movement commands will not proceed
+to the next (or previous) article if the current article is unread.
+Instead, they will choose the current article.
-@example
-* 0: mail.ding 19961002T012943
- 0: custom 19961002T012713
-@end example
+@item gnus-auto-center-summary
+@vindex gnus-auto-center-summary
+If non-@code{nil}, Gnus will keep the point in the summary buffer
+centered at all times. This makes things quite tidy, but if you have a
+slow network connection, or simply do not like this un-Emacsism, you can
+set this variable to @code{nil} to get the normal Emacs scrolling
+action. This will also inhibit horizontal re-centering of the summary
+buffer, which might make it more inconvenient to read extremely long
+threads.
-As you can see, the date is displayed in compact ISO 8601 format. This
-may be a bit too much, so to just display the date, you could say
-something like:
+This variable can also be a number. In that case, center the window at
+the given number of lines from the top.
-@lisp
-(setq gnus-group-line-format
- "%M\%S\%p\%P\%5y: %(%-40,40g%) %6,6~(cut 2)d\n")
-@end lisp
+@item gnus-summary-stop-at-end-of-message
+@vindex gnus-summary-stop-at-end-of-message
+If non-@code{nil}, don't go to the next article when hitting
+@kbd{SPC}, and you're at the end of the article.
-If you would like greater control of the time format, you can use a
-user-defined format spec. Something like the following should do the
-trick:
+@end table
-@lisp
-(setq gnus-group-line-format
- "%M\%S\%p\%P\%5y: %(%-40,40g%) %ud\n")
-(defun gnus-user-format-function-d (headers)
- (let ((time (gnus-group-timestamp gnus-tmp-group)))
- (if time
- (format-time-string "%b %d %H:%M" time)
- "")))
-@end lisp
+@node Choosing Articles
+@section Choosing Articles
+@cindex selecting articles
-@node File Commands
-@subsection File Commands
-@cindex file commands
+@menu
+* Choosing Commands:: Commands for choosing articles.
+* Choosing Variables:: Variables that influence these commands.
+@end menu
-@table @kbd
-@item r
-@kindex r (Group)
-@findex gnus-group-read-init-file
-@vindex gnus-init-file
-@cindex reading init file
-Re-read the init file (@code{gnus-init-file}, which defaults to
-@file{~/.gnus.el}) (@code{gnus-group-read-init-file}).
+@node Choosing Commands
+@subsection Choosing Commands
-@item s
-@kindex s (Group)
-@findex gnus-group-save-newsrc
-@cindex saving .newsrc
-Save the @file{.newsrc.eld} file (and @file{.newsrc} if wanted)
-(@code{gnus-group-save-newsrc}). If given a prefix, force saving the
-file(s) whether Gnus thinks it is necessary or not.
+None of the following movement commands understand the numeric prefix,
+and they all select and display an article.
-@c @item Z
-@c @kindex Z (Group)
-@c @findex gnus-group-clear-dribble
-@c Clear the dribble buffer (@code{gnus-group-clear-dribble}).
+If you want to fetch new articles or redisplay the group, see
+@ref{Exiting the Summary Buffer}.
-@end table
+@table @kbd
+@item SPACE
+@kindex SPACE (Summary)
+@findex gnus-summary-next-page
+Select the current article, or, if that one's read already, the next
+unread article (@code{gnus-summary-next-page}).
+If you have an article window open already and you press @kbd{SPACE}
+again, the article will be scrolled. This lets you conveniently
+@kbd{SPACE} through an entire newsgroup. @xref{Paging the Article}.
-@node Sieve Commands
-@subsection Sieve Commands
-@cindex group sieve commands
+@item G n
+@itemx n
+@kindex n (Summary)
+@kindex G n (Summary)
+@findex gnus-summary-next-unread-article
+@c @icon{gnus-summary-next-unread}
+Go to next unread article (@code{gnus-summary-next-unread-article}).
-Sieve is a server-side mail filtering language. In Gnus you can use
-the @code{sieve} group parameter (@pxref{Group Parameters}) to specify
-sieve rules that should apply to each group. Gnus provides two
-commands to translate all these group parameters into a proper Sieve
-script that can be transfered to the server somehow.
+@item G p
+@itemx p
+@kindex p (Summary)
+@findex gnus-summary-prev-unread-article
+@c @icon{gnus-summary-prev-unread}
+Go to previous unread article (@code{gnus-summary-prev-unread-article}).
-@vindex gnus-sieve-file
-@vindex gnus-sieve-region-start
-@vindex gnus-sieve-region-end
-The generated Sieve script is placed in @code{gnus-sieve-file} (by
-default @file{~/.sieve}). The Sieve code that Gnus generate is placed
-between two delimiters, @code{gnus-sieve-region-start} and
-@code{gnus-sieve-region-end}, so you may write additional Sieve code
-outside these delimiters that will not be removed the next time you
-regenerate the Sieve script.
+@item G N
+@itemx N
+@kindex N (Summary)
+@kindex G N (Summary)
+@findex gnus-summary-next-article
+Go to the next article (@code{gnus-summary-next-article}).
-@vindex gnus-sieve-crosspost
-The variable @code{gnus-sieve-crosspost} controls how the Sieve script
-is generated. If it is non-@code{nil} (the default) articles is
-placed in all groups that have matching rules, otherwise the article
-is only placed in the group with the first matching rule. For
-example, the group parameter @samp{(sieve address "sender"
-"owner-ding@@hpc.uh.edu")} will generate the following piece of Sieve
-code if @code{gnus-sieve-crosspost} is @code{nil}. (When
-@code{gnus-sieve-crosspost} is non-@code{nil}, it looks the same
-except that the line containing the call to @code{stop} is removed.)
+@item G P
+@itemx P
+@kindex P (Summary)
+@kindex G P (Summary)
+@findex gnus-summary-prev-article
+Go to the previous article (@code{gnus-summary-prev-article}).
-@example
-if address "sender" "owner-ding@@hpc.uh.edu" @{
- fileinto "INBOX.ding";
- stop;
-@}
-@end example
+@item G C-n
+@kindex G C-n (Summary)
+@findex gnus-summary-next-same-subject
+Go to the next article with the same subject
+(@code{gnus-summary-next-same-subject}).
-@xref{Top, Emacs Sieve, Top, sieve, Emacs Sieve}.
+@item G C-p
+@kindex G C-p (Summary)
+@findex gnus-summary-prev-same-subject
+Go to the previous article with the same subject
+(@code{gnus-summary-prev-same-subject}).
-@table @kbd
+@item G f
+@itemx .
+@kindex G f (Summary)
+@kindex . (Summary)
+@findex gnus-summary-first-unread-article
+Go to the first unread article
+(@code{gnus-summary-first-unread-article}).
-@item D g
-@kindex D g (Group)
-@findex gnus-sieve-generate
-@vindex gnus-sieve-file
-@cindex generating sieve script
-Regenerate a Sieve script from the @code{sieve} group parameters and
-put you into the @code{gnus-sieve-file} without saving it.
+@item G b
+@itemx ,
+@kindex G b (Summary)
+@kindex , (Summary)
+@findex gnus-summary-best-unread-article
+Go to the unread article with the highest score
+(@code{gnus-summary-best-unread-article}). If given a prefix argument,
+go to the first unread article that has a score over the default score.
-@item D u
-@kindex D u (Group)
-@findex gnus-sieve-update
-@vindex gnus-sieve-file
-@cindex updating sieve script
-Regenerates the Gnus managed part of @code{gnus-sieve-file} using the
-@code{sieve} group parameters, save the file and upload it to the
-server using the @code{sieveshell} program.
+@item G l
+@itemx l
+@kindex l (Summary)
+@kindex G l (Summary)
+@findex gnus-summary-goto-last-article
+Go to the previous article read (@code{gnus-summary-goto-last-article}).
-@end table
+@item G o
+@kindex G o (Summary)
+@findex gnus-summary-pop-article
+@cindex history
+@cindex article history
+Pop an article off the summary history and go to this article
+(@code{gnus-summary-pop-article}). This command differs from the
+command above in that you can pop as many previous articles off the
+history as you like, while @kbd{l} toggles the two last read articles.
+For a somewhat related issue (if you use these commands a lot),
+@pxref{Article Backlog}.
+@item G j
+@itemx j
+@kindex j (Summary)
+@kindex G j (Summary)
+@findex gnus-summary-goto-article
+Ask for an article number or @code{Message-ID}, and then go to that
+article (@code{gnus-summary-goto-article}).
-@node Summary Buffer
-@chapter Summary Buffer
-@cindex summary buffer
+@end table
-A line for each article is displayed in the summary buffer. You can
-move around, read articles, post articles and reply to articles.
-The most common way to a summary buffer is to select a group from the
-group buffer (@pxref{Selecting a Group}).
+@node Choosing Variables
+@subsection Choosing Variables
-You can have as many summary buffers open as you wish.
+Some variables relevant for moving and selecting articles:
-You can customize the Summary Mode tool bar, see @kbd{M-x
-customize-apropos RET gnus-summary-tool-bar}. This feature is only
-available in Emacs.
+@table @code
+@item gnus-auto-extend-newsgroup
+@vindex gnus-auto-extend-newsgroup
+All the movement commands will try to go to the previous (or next)
+article, even if that article isn't displayed in the Summary buffer if
+this variable is non-@code{nil}. Gnus will then fetch the article from
+the server and display it in the article buffer.
-@kindex v (Summary)
-@cindex keys, reserved for users (Summary)
-The key @kbd{v} is reserved for users. You can bind it to some
-command or better use it as a prefix key. For example:
-@lisp
-(define-key gnus-summary-mode-map (kbd "v -") "LrS") ;; lower subthread
-@end lisp
+@item gnus-select-article-hook
+@vindex gnus-select-article-hook
+This hook is called whenever an article is selected. The default is
+@code{nil}. If you would like each article to be saved in the Agent as
+you read it, putting @code{gnus-agent-fetch-selected-article} on this
+hook will do so.
-@menu
-* Summary Buffer Format:: Deciding how the summary buffer is to look.
-* Summary Maneuvering:: Moving around the summary buffer.
-* Choosing Articles:: Reading articles.
-* Paging the Article:: Scrolling the current article.
-* Reply Followup and Post:: Posting articles.
-* Delayed Articles:: Send articles at a later time.
-* Marking Articles:: Marking articles as read, expirable, etc.
-* Limiting:: You can limit the summary buffer.
-* Threading:: How threads are made.
-* Sorting the Summary Buffer:: How articles and threads are sorted.
-* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
-* Article Caching:: You may store articles in a cache.
-* Persistent Articles:: Making articles expiry-resistant.
-* Sticky Articles:: Article buffers that are not reused.
-* Article Backlog:: Having already read articles hang around.
-* Saving Articles:: Ways of customizing article saving.
-* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
-* Article Treatment:: The article buffer can be mangled at will.
-* MIME Commands:: Doing MIMEy things with the articles.
-* Charsets:: Character set issues.
-* Article Commands:: Doing various things with the article buffer.
-* Summary Sorting:: Sorting the summary buffer in various ways.
-* Finding the Parent:: No child support? Get the parent.
-* Alternative Approaches:: Reading using non-default summaries.
-* Tree Display:: A more visual display of threads.
-* Mail Group Commands:: Some commands can only be used in mail groups.
-* Various Summary Stuff:: What didn't fit anywhere else.
-* Exiting the Summary Buffer:: Returning to the Group buffer,
- or reselecting the current group.
-* Crosspost Handling:: How crossposted articles are dealt with.
-* Duplicate Suppression:: An alternative when crosspost handling fails.
-* Security:: Decrypt and Verify.
-* Mailing List:: Mailing list minor mode.
-@end menu
+@item gnus-mark-article-hook
+@vindex gnus-mark-article-hook
+@findex gnus-summary-mark-unread-as-read
+@findex gnus-summary-mark-read-and-unread-as-read
+@findex gnus-unread-mark
+This hook is called whenever an article is selected. It is intended to
+be used for marking articles as read. The default value is
+@code{gnus-summary-mark-read-and-unread-as-read}, and will change the
+mark of almost any article you read to @code{gnus-read-mark}. The only
+articles not affected by this function are ticked, dormant, and
+expirable articles. If you'd instead like to just have unread articles
+marked as read, you can use @code{gnus-summary-mark-unread-as-read}
+instead. It will leave marks like @code{gnus-low-score-mark},
+@code{gnus-del-mark} (and so on) alone.
+@end table
-@node Summary Buffer Format
-@section Summary Buffer Format
-@cindex summary buffer format
-@iftex
-@iflatex
-\gnusfigure{The Summary Buffer}{180}{
-\put(0,0){\epsfig{figure=ps/summary,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-article,width=7.5cm}}}
-}
-@end iflatex
-@end iftex
+@node Paging the Article
+@section Scrolling the Article
+@cindex article scrolling
-@menu
-* Summary Buffer Lines:: You can specify how summary lines should look.
-* To From Newsgroups:: How to not display your own name.
-* Summary Buffer Mode Line:: You can say how the mode line should look.
-* Summary Highlighting:: Making the summary buffer all pretty and nice.
-@end menu
+@table @kbd
-@findex mail-extract-address-components
-@findex gnus-extract-address-components
-@vindex gnus-extract-address-components
-Gnus will use the value of the @code{gnus-extract-address-components}
-variable as a function for getting the name and address parts of a
-@code{From} header. Two pre-defined functions exist:
-@code{gnus-extract-address-components}, which is the default, quite
-fast, and too simplistic solution; and
-@code{mail-extract-address-components}, which works very nicely, but is
-slower. The default function will return the wrong answer in 5% of the
-cases. If this is unacceptable to you, use the other function instead:
+@item SPACE
+@kindex SPACE (Summary)
+@findex gnus-summary-next-page
+Pressing @kbd{SPACE} will scroll the current article forward one page,
+or, if you have come to the end of the current article, will choose the
+next article (@code{gnus-summary-next-page}).
-@lisp
-(setq gnus-extract-address-components
- 'mail-extract-address-components)
-@end lisp
+@vindex gnus-article-boring-faces
+@vindex gnus-article-skip-boring
+If @code{gnus-article-skip-boring} is non-@code{nil} and the rest of
+the article consists only of citations and signature, then it will be
+skipped; the next article will be shown instead. You can customize
+what is considered uninteresting with
+@code{gnus-article-boring-faces}. You can manually view the article's
+pages, no matter how boring, using @kbd{C-M-v}.
-@vindex gnus-summary-same-subject
-@code{gnus-summary-same-subject} is a string indicating that the current
-article has the same subject as the previous. This string will be used
-with those specs that require it. The default is @code{""}.
+@item DEL
+@kindex DEL (Summary)
+@findex gnus-summary-prev-page
+Scroll the current article back one page (@code{gnus-summary-prev-page}).
+@item RET
+@kindex RET (Summary)
+@findex gnus-summary-scroll-up
+Scroll the current article one line forward
+(@code{gnus-summary-scroll-up}).
-@node Summary Buffer Lines
-@subsection Summary Buffer Lines
+@item M-RET
+@kindex M-RET (Summary)
+@findex gnus-summary-scroll-down
+Scroll the current article one line backward
+(@code{gnus-summary-scroll-down}).
-@vindex gnus-summary-line-format
-You can change the format of the lines in the summary buffer by changing
-the @code{gnus-summary-line-format} variable. It works along the same
-lines as a normal @code{format} string, with some extensions
-(@pxref{Formatting Variables}).
+@item A g
+@itemx g
+@kindex A g (Summary)
+@kindex g (Summary)
+@findex gnus-summary-show-article
+@vindex gnus-summary-show-article-charset-alist
+(Re)fetch the current article (@code{gnus-summary-show-article}). If
+given a prefix, show a completely ``raw'' article, just the way it
+came from the server. If given a prefix twice (i.e., @kbd{C-u C-u
+g'}), fetch the current article, but don't run any of the article
+treatment functions.
-There should always be a colon or a point position marker on the line;
-the cursor always moves to the point position marker or the colon after
-performing an operation. (Of course, Gnus wouldn't be Gnus if it wasn't
-possible to change this. Just write a new function
-@code{gnus-goto-colon} which does whatever you like with the cursor.)
-@xref{Positioning Point}.
+@cindex charset, view article with different charset
+If given a numerical prefix, you can do semi-manual charset stuff.
+@kbd{C-u 0 g cn-gb-2312 RET} will decode the message as if it were
+encoded in the @code{cn-gb-2312} charset. If you have
-The default string is @samp{%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n}.
+@lisp
+(setq gnus-summary-show-article-charset-alist
+ '((1 . cn-gb-2312)
+ (2 . big5)))
+@end lisp
-The following format specification characters and extended format
-specification(s) are understood:
+then you can say @kbd{C-u 1 g} to get the same effect.
-@table @samp
-@item N
-Article number.
-@item S
-Subject string. List identifiers stripped,
-@code{gnus-list-identifiers}. @xref{Article Hiding}.
-@item s
-Subject if the article is the root of the thread or the previous article
-had a different subject, @code{gnus-summary-same-subject} otherwise.
-(@code{gnus-summary-same-subject} defaults to @code{""}.)
-@item F
-Full @code{From} header.
-@item n
-The name (from the @code{From} header).
-@item f
-The name, @code{To} header or the @code{Newsgroups} header (@pxref{To
-From Newsgroups}).
-@item a
-The name (from the @code{From} header). This differs from the @code{n}
-spec in that it uses the function designated by the
-@code{gnus-extract-address-components} variable, which is slower, but
-may be more thorough.
-@item A
-The address (from the @code{From} header). This works the same way as
-the @code{a} spec.
-@item L
-Number of lines in the article.
-@item c
-Number of characters in the article. This specifier is not supported
-in some methods (like nnfolder).
-@item k
-Pretty-printed version of the number of characters in the article;
-for example, @samp{1.2k} or @samp{0.4M}.
-@item I
-Indentation based on thread level (@pxref{Customizing Threading}).
-@item B
-A complex trn-style thread tree, showing response-connecting trace
-lines. A thread could be drawn like this:
+@item A <
+@itemx <
+@kindex < (Summary)
+@kindex A < (Summary)
+@findex gnus-summary-beginning-of-article
+Scroll to the beginning of the article
+(@code{gnus-summary-beginning-of-article}).
-@example
->
-+->
-| +->
-| | \->
-| | \->
-| \->
-+->
-\->
-@end example
+@item A >
+@itemx >
+@kindex > (Summary)
+@kindex A > (Summary)
+@findex gnus-summary-end-of-article
+Scroll to the end of the article (@code{gnus-summary-end-of-article}).
-You can customize the appearance with the following options. Note
-that it is possible to make the thread display look really neat by
-replacing the default @acronym{ASCII} characters with graphic
-line-drawing glyphs.
-@table @code
-@item gnus-sum-thread-tree-root
-@vindex gnus-sum-thread-tree-root
-Used for the root of a thread. If @code{nil}, use subject
-instead. The default is @samp{> }.
+@item A s
+@itemx s
+@kindex A s (Summary)
+@kindex s (Summary)
+@findex gnus-summary-isearch-article
+Perform an isearch in the article buffer
+(@code{gnus-summary-isearch-article}).
-@item gnus-sum-thread-tree-false-root
-@vindex gnus-sum-thread-tree-false-root
-Used for the false root of a thread (@pxref{Loose Threads}). If
-@code{nil}, use subject instead. The default is @samp{> }.
+@item h
+@kindex h (Summary)
+@findex gnus-summary-select-article-buffer
+Select the article buffer (@code{gnus-summary-select-article-buffer}).
-@item gnus-sum-thread-tree-single-indent
-@vindex gnus-sum-thread-tree-single-indent
-Used for a thread with just one message. If @code{nil}, use subject
-instead. The default is @samp{}.
+@end table
-@item gnus-sum-thread-tree-vertical
-@vindex gnus-sum-thread-tree-vertical
-Used for drawing a vertical line. The default is @samp{| }.
-@item gnus-sum-thread-tree-indent
-@vindex gnus-sum-thread-tree-indent
-Used for indenting. The default is @samp{ }.
+@node Reply Followup and Post
+@section Reply, Followup and Post
-@item gnus-sum-thread-tree-leaf-with-other
-@vindex gnus-sum-thread-tree-leaf-with-other
-Used for a leaf with brothers. The default is @samp{+-> }.
-
-@item gnus-sum-thread-tree-single-leaf
-@vindex gnus-sum-thread-tree-single-leaf
-Used for a leaf without brothers. The default is @samp{\-> }
-
-@end table
-
-@item T
-Nothing if the article is a root and lots of spaces if it isn't (it
-pushes everything after it off the screen).
-@item [
-Opening bracket, which is normally @samp{[}, but can also be @samp{<}
-for adopted articles (@pxref{Customizing Threading}).
-@item ]
-Closing bracket, which is normally @samp{]}, but can also be @samp{>}
-for adopted articles.
-@item >
-One space for each thread level.
-@item <
-Twenty minus thread level spaces.
-@item U
-Unread. @xref{Read Articles}.
-
-@item R
-This misleadingly named specifier is the @dfn{secondary mark}. This
-mark will say whether the article has been replied to, has been cached,
-or has been saved. @xref{Other Marks}.
-
-@item i
-Score as a number (@pxref{Scoring}).
-@item z
-@vindex gnus-summary-zcore-fuzz
-Zcore, @samp{+} if above the default level and @samp{-} if below the
-default level. If the difference between
-@code{gnus-summary-default-score} and the score is less than
-@code{gnus-summary-zcore-fuzz}, this spec will not be used.
-@item V
-Total thread score.
-@item x
-@code{Xref}.
-@item D
-@code{Date}.
-@item d
-The @code{Date} in @code{DD-MMM} format.
-@item o
-The @code{Date} in @var{YYYYMMDD}@code{T}@var{HHMMSS} format.
-@item M
-@code{Message-ID}.
-@item r
-@code{References}.
-@item t
-Number of articles in the current sub-thread. Using this spec will slow
-down summary buffer generation somewhat.
-@item e
-An @samp{=} (@code{gnus-not-empty-thread-mark}) will be displayed if the
-article has any children.
-@item P
-The line number.
-@item O
-Download mark.
-@item *
-Desired cursor position (instead of after first colon).
-@item &user-date;
-Age sensitive date format. Various date format is defined in
-@code{gnus-user-date-format-alist}.
-@item u
-User defined specifier. The next character in the format string should
-be a letter. Gnus will call the function
-@code{gnus-user-format-function-@var{x}}, where @var{x} is the letter
-following @samp{%u}. The function will be passed the current header as
-argument. The function should return a string, which will be inserted
-into the summary just like information from any other summary specifier.
-@end table
-
-Text between @samp{%(} and @samp{%)} will be highlighted with
-@code{gnus-mouse-face} when the mouse point is placed inside the area.
-There can only be one such area.
-
-The @samp{%U} (status), @samp{%R} (replied) and @samp{%z} (zcore) specs
-have to be handled with care. For reasons of efficiency, Gnus will
-compute what column these characters will end up in, and ``hard-code''
-that. This means that it is invalid to have these specs after a
-variable-length spec. Well, you might not be arrested, but your summary
-buffer will look strange, which is bad enough.
-
-The smart choice is to have these specs as far to the left as possible.
-(Isn't that the case with everything, though? But I digress.)
-
-This restriction may disappear in later versions of Gnus.
-
-
-@node To From Newsgroups
-@subsection To From Newsgroups
-@cindex To
-@cindex Newsgroups
-
-In some groups (particularly in archive groups), the @code{From} header
-isn't very interesting, since all the articles there are written by
-you. To display the information in the @code{To} or @code{Newsgroups}
-headers instead, you need to decide three things: What information to
-gather; where to display it; and when to display it.
-
-@enumerate
-@item
-@vindex gnus-extra-headers
-The reading of extra header information is controlled by the
-@code{gnus-extra-headers}. This is a list of header symbols. For
-instance:
-
-@lisp
-(setq gnus-extra-headers
- '(To Newsgroups X-Newsreader))
-@end lisp
-
-This will result in Gnus trying to obtain these three headers, and
-storing it in header structures for later easy retrieval.
-
-@item
-@findex gnus-extra-header
-The value of these extra headers can be accessed via the
-@code{gnus-extra-header} function. Here's a format line spec that will
-access the @code{X-Newsreader} header:
-
-@example
-"%~(form (gnus-extra-header 'X-Newsreader))@@"
-@end example
-
-@item
-@vindex gnus-ignored-from-addresses
-The @code{gnus-ignored-from-addresses} variable says when the @samp{%f}
-summary line spec returns the @code{To}, @code{Newsreader} or
-@code{From} header. If this regexp matches the contents of the
-@code{From} header, the value of the @code{To} or @code{Newsreader}
-headers are used instead.
-
-To distinguish regular articles from those where the @code{From} field
-has been swapped, a string is prefixed to the @code{To} or
-@code{Newsgroups} header in the summary line. By default the string is
-@samp{-> } for @code{To} and @samp{=> } for @code{Newsgroups}, you can
-customize these strings with @code{gnus-summary-to-prefix} and
-@code{gnus-summary-newsgroup-prefix}.
-
-@end enumerate
-
-@vindex nnmail-extra-headers
-A related variable is @code{nnmail-extra-headers}, which controls when
-to include extra headers when generating overview (@acronym{NOV}) files.
-If you have old overview files, you should regenerate them after
-changing this variable, by entering the server buffer using @kbd{^},
-and then @kbd{g} on the appropriate mail server (e.g. nnml) to cause
-regeneration.
-
-@vindex gnus-summary-line-format
-You also have to instruct Gnus to display the data by changing the
-@code{%n} spec to the @code{%f} spec in the
-@code{gnus-summary-line-format} variable.
-
-In summary, you'd typically put something like the following in
-@file{~/.gnus.el}:
-
-@lisp
-(setq gnus-extra-headers
- '(To Newsgroups))
-(setq nnmail-extra-headers gnus-extra-headers)
-(setq gnus-summary-line-format
- "%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n")
-(setq gnus-ignored-from-addresses
- "Your Name Here")
-@end lisp
-
-(The values listed above are the default values in Gnus. Alter them
-to fit your needs.)
-
-A note for news server administrators, or for users who wish to try to
-convince their news server administrator to provide some additional
-support:
-
-The above is mostly useful for mail groups, where you have control over
-the @acronym{NOV} files that are created. However, if you can persuade your
-nntp admin to add (in the usual implementation, notably INN):
-
-@example
-Newsgroups:full
-@end example
-
-to the end of her @file{overview.fmt} file, then you can use that just
-as you would the extra headers from the mail groups.
-
-
-@node Summary Buffer Mode Line
-@subsection Summary Buffer Mode Line
-
-@vindex gnus-summary-mode-line-format
-You can also change the format of the summary mode bar (@pxref{Mode Line
-Formatting}). Set @code{gnus-summary-mode-line-format} to whatever you
-like. The default is @samp{Gnus: %%b [%A] %Z}.
-
-Here are the elements you can play with:
-
-@table @samp
-@item G
-Group name.
-@item p
-Unprefixed group name.
-@item A
-Current article number.
-@item z
-Current article score.
-@item V
-Gnus version.
-@item U
-Number of unread articles in this group.
-@item e
-Number of unread articles in this group that aren't displayed in the
-summary buffer.
-@item Z
-A string with the number of unread and unselected articles represented
-either as @samp{<%U(+%e) more>} if there are both unread and unselected
-articles, and just as @samp{<%U more>} if there are just unread articles
-and no unselected ones.
-@item g
-Shortish group name. For instance, @samp{rec.arts.anime} will be
-shortened to @samp{r.a.anime}.
-@item S
-Subject of the current article.
-@item u
-User-defined spec (@pxref{User-Defined Specs}).
-@item s
-Name of the current score file (@pxref{Scoring}).
-@item d
-Number of dormant articles (@pxref{Unread Articles}).
-@item t
-Number of ticked articles (@pxref{Unread Articles}).
-@item r
-Number of articles that have been marked as read in this session.
-@item E
-Number of articles expunged by the score files.
-@end table
-
-
-@node Summary Highlighting
-@subsection Summary Highlighting
-
-@table @code
-
-@item gnus-visual-mark-article-hook
-@vindex gnus-visual-mark-article-hook
-This hook is run after selecting an article. It is meant to be used for
-highlighting the article in some way. It is not run if
-@code{gnus-visual} is @code{nil}.
-
-@item gnus-summary-update-hook
-@vindex gnus-summary-update-hook
-This hook is called when a summary line is changed. It is not run if
-@code{gnus-visual} is @code{nil}.
-
-@item gnus-summary-selected-face
-@vindex gnus-summary-selected-face
-This is the face (or @dfn{font} as some people call it) used to
-highlight the current article in the summary buffer.
-
-@item gnus-summary-highlight
-@vindex gnus-summary-highlight
-Summary lines are highlighted according to this variable, which is a
-list where the elements are of the format @code{(@var{form}
-. @var{face})}. If you would, for instance, like ticked articles to be
-italic and high-scored articles to be bold, you could set this variable
-to something like
-@lisp
-(((eq mark gnus-ticked-mark) . italic)
- ((> score default) . bold))
-@end lisp
-As you may have guessed, if @var{form} returns a non-@code{nil} value,
-@var{face} will be applied to the line.
-@end table
-
-
-@node Summary Maneuvering
-@section Summary Maneuvering
-@cindex summary movement
-
-All the straight movement commands understand the numeric prefix and
-behave pretty much as you'd expect.
-
-None of these commands select articles.
-
-@table @kbd
-@item G M-n
-@itemx M-n
-@kindex M-n (Summary)
-@kindex G M-n (Summary)
-@findex gnus-summary-next-unread-subject
-Go to the next summary line of an unread article
-(@code{gnus-summary-next-unread-subject}).
-
-@item G M-p
-@itemx M-p
-@kindex M-p (Summary)
-@kindex G M-p (Summary)
-@findex gnus-summary-prev-unread-subject
-Go to the previous summary line of an unread article
-(@code{gnus-summary-prev-unread-subject}).
-
-@item G g
-@kindex G g (Summary)
-@findex gnus-summary-goto-subject
-Ask for an article number and then go to the summary line of that article
-without displaying the article (@code{gnus-summary-goto-subject}).
-@end table
-
-If Gnus asks you to press a key to confirm going to the next group, you
-can use the @kbd{C-n} and @kbd{C-p} keys to move around the group
-buffer, searching for the next group to read without actually returning
-to the group buffer.
-
-Variables related to summary movement:
-
-@table @code
-
-@vindex gnus-auto-select-next
-@item gnus-auto-select-next
-If you issue one of the movement commands (like @kbd{n}) and there are
-no more unread articles after the current one, Gnus will offer to go to
-the next group. If this variable is @code{t} and the next group is
-empty, Gnus will exit summary mode and return to the group buffer. If
-this variable is neither @code{t} nor @code{nil}, Gnus will select the
-next group with unread articles. As a special case, if this variable
-is @code{quietly}, Gnus will select the next group without asking for
-confirmation. If this variable is @code{almost-quietly}, the same
-will happen only if you are located on the last article in the group.
-Finally, if this variable is @code{slightly-quietly}, the @kbd{Z n}
-command will go to the next group without confirmation. Also
-@pxref{Group Levels}.
-
-@item gnus-auto-select-same
-@vindex gnus-auto-select-same
-If non-@code{nil}, all the movement commands will try to go to the next
-article with the same subject as the current. (@dfn{Same} here might
-mean @dfn{roughly equal}. See @code{gnus-summary-gather-subject-limit}
-for details (@pxref{Customizing Threading}).) If there are no more
-articles with the same subject, go to the first unread article.
-
-This variable is not particularly useful if you use a threaded display.
-
-@item gnus-summary-check-current
-@vindex gnus-summary-check-current
-If non-@code{nil}, all the ``unread'' movement commands will not proceed
-to the next (or previous) article if the current article is unread.
-Instead, they will choose the current article.
-
-@item gnus-auto-center-summary
-@vindex gnus-auto-center-summary
-If non-@code{nil}, Gnus will keep the point in the summary buffer
-centered at all times. This makes things quite tidy, but if you have a
-slow network connection, or simply do not like this un-Emacsism, you can
-set this variable to @code{nil} to get the normal Emacs scrolling
-action. This will also inhibit horizontal re-centering of the summary
-buffer, which might make it more inconvenient to read extremely long
-threads.
-
-This variable can also be a number. In that case, center the window at
-the given number of lines from the top.
-
-@item gnus-summary-stop-at-end-of-message
-@vindex gnus-summary-stop-at-end-of-message
-If non-@code{nil}, don't go to the next article when hitting
-@kbd{SPC}, and you're at the end of the article.
-
-@end table
-
-
-@node Choosing Articles
-@section Choosing Articles
-@cindex selecting articles
-
-@menu
-* Choosing Commands:: Commands for choosing articles.
-* Choosing Variables:: Variables that influence these commands.
-@end menu
-
-
-@node Choosing Commands
-@subsection Choosing Commands
-
-None of the following movement commands understand the numeric prefix,
-and they all select and display an article.
-
-If you want to fetch new articles or redisplay the group, see
-@ref{Exiting the Summary Buffer}.
-
-@table @kbd
-@item SPACE
-@kindex SPACE (Summary)
-@findex gnus-summary-next-page
-Select the current article, or, if that one's read already, the next
-unread article (@code{gnus-summary-next-page}).
-
-If you have an article window open already and you press @kbd{SPACE}
-again, the article will be scrolled. This lets you conveniently
-@kbd{SPACE} through an entire newsgroup. @xref{Paging the Article}.
-
-@item G n
-@itemx n
-@kindex n (Summary)
-@kindex G n (Summary)
-@findex gnus-summary-next-unread-article
-@c @icon{gnus-summary-next-unread}
-Go to next unread article (@code{gnus-summary-next-unread-article}).
-
-@item G p
-@itemx p
-@kindex p (Summary)
-@findex gnus-summary-prev-unread-article
-@c @icon{gnus-summary-prev-unread}
-Go to previous unread article (@code{gnus-summary-prev-unread-article}).
-
-@item G N
-@itemx N
-@kindex N (Summary)
-@kindex G N (Summary)
-@findex gnus-summary-next-article
-Go to the next article (@code{gnus-summary-next-article}).
-
-@item G P
-@itemx P
-@kindex P (Summary)
-@kindex G P (Summary)
-@findex gnus-summary-prev-article
-Go to the previous article (@code{gnus-summary-prev-article}).
-
-@item G C-n
-@kindex G C-n (Summary)
-@findex gnus-summary-next-same-subject
-Go to the next article with the same subject
-(@code{gnus-summary-next-same-subject}).
-
-@item G C-p
-@kindex G C-p (Summary)
-@findex gnus-summary-prev-same-subject
-Go to the previous article with the same subject
-(@code{gnus-summary-prev-same-subject}).
-
-@item G f
-@itemx .
-@kindex G f (Summary)
-@kindex . (Summary)
-@findex gnus-summary-first-unread-article
-Go to the first unread article
-(@code{gnus-summary-first-unread-article}).
-
-@item G b
-@itemx ,
-@kindex G b (Summary)
-@kindex , (Summary)
-@findex gnus-summary-best-unread-article
-Go to the unread article with the highest score
-(@code{gnus-summary-best-unread-article}). If given a prefix argument,
-go to the first unread article that has a score over the default score.
-
-@item G l
-@itemx l
-@kindex l (Summary)
-@kindex G l (Summary)
-@findex gnus-summary-goto-last-article
-Go to the previous article read (@code{gnus-summary-goto-last-article}).
-
-@item G o
-@kindex G o (Summary)
-@findex gnus-summary-pop-article
-@cindex history
-@cindex article history
-Pop an article off the summary history and go to this article
-(@code{gnus-summary-pop-article}). This command differs from the
-command above in that you can pop as many previous articles off the
-history as you like, while @kbd{l} toggles the two last read articles.
-For a somewhat related issue (if you use these commands a lot),
-@pxref{Article Backlog}.
-
-@item G j
-@itemx j
-@kindex j (Summary)
-@kindex G j (Summary)
-@findex gnus-summary-goto-article
-Ask for an article number or @code{Message-ID}, and then go to that
-article (@code{gnus-summary-goto-article}).
-
-@end table
-
-
-@node Choosing Variables
-@subsection Choosing Variables
-
-Some variables relevant for moving and selecting articles:
-
-@table @code
-@item gnus-auto-extend-newsgroup
-@vindex gnus-auto-extend-newsgroup
-All the movement commands will try to go to the previous (or next)
-article, even if that article isn't displayed in the Summary buffer if
-this variable is non-@code{nil}. Gnus will then fetch the article from
-the server and display it in the article buffer.
-
-@item gnus-select-article-hook
-@vindex gnus-select-article-hook
-This hook is called whenever an article is selected. The default is
-@code{nil}. If you would like each article to be saved in the Agent as
-you read it, putting @code{gnus-agent-fetch-selected-article} on this
-hook will do so.
-
-@item gnus-mark-article-hook
-@vindex gnus-mark-article-hook
-@findex gnus-summary-mark-unread-as-read
-@findex gnus-summary-mark-read-and-unread-as-read
-@findex gnus-unread-mark
-This hook is called whenever an article is selected. It is intended to
-be used for marking articles as read. The default value is
-@code{gnus-summary-mark-read-and-unread-as-read}, and will change the
-mark of almost any article you read to @code{gnus-read-mark}. The only
-articles not affected by this function are ticked, dormant, and
-expirable articles. If you'd instead like to just have unread articles
-marked as read, you can use @code{gnus-summary-mark-unread-as-read}
-instead. It will leave marks like @code{gnus-low-score-mark},
-@code{gnus-del-mark} (and so on) alone.
-
-@end table
-
-
-@node Paging the Article
-@section Scrolling the Article
-@cindex article scrolling
-
-@table @kbd
-
-@item SPACE
-@kindex SPACE (Summary)
-@findex gnus-summary-next-page
-Pressing @kbd{SPACE} will scroll the current article forward one page,
-or, if you have come to the end of the current article, will choose the
-next article (@code{gnus-summary-next-page}).
-
-@vindex gnus-article-boring-faces
-@vindex gnus-article-skip-boring
-If @code{gnus-article-skip-boring} is non-@code{nil} and the rest of
-the article consists only of citations and signature, then it will be
-skipped; the next article will be shown instead. You can customize
-what is considered uninteresting with
-@code{gnus-article-boring-faces}. You can manually view the article's
-pages, no matter how boring, using @kbd{C-M-v}.
-
-@item DEL
-@kindex DEL (Summary)
-@findex gnus-summary-prev-page
-Scroll the current article back one page (@code{gnus-summary-prev-page}).
-
-@item RET
-@kindex RET (Summary)
-@findex gnus-summary-scroll-up
-Scroll the current article one line forward
-(@code{gnus-summary-scroll-up}).
-
-@item M-RET
-@kindex M-RET (Summary)
-@findex gnus-summary-scroll-down
-Scroll the current article one line backward
-(@code{gnus-summary-scroll-down}).
-
-@item A g
-@itemx g
-@kindex A g (Summary)
-@kindex g (Summary)
-@findex gnus-summary-show-article
-@vindex gnus-summary-show-article-charset-alist
-(Re)fetch the current article (@code{gnus-summary-show-article}). If
-given a prefix, fetch the current article, but don't run any of the
-article treatment functions. This will give you a ``raw'' article, just
-the way it came from the server.
-
-@cindex charset, view article with different charset
-If given a numerical prefix, you can do semi-manual charset stuff.
-@kbd{C-u 0 g cn-gb-2312 RET} will decode the message as if it were
-encoded in the @code{cn-gb-2312} charset. If you have
-
-@lisp
-(setq gnus-summary-show-article-charset-alist
- '((1 . cn-gb-2312)
- (2 . big5)))
-@end lisp
-
-then you can say @kbd{C-u 1 g} to get the same effect.
-
-@item A <
-@itemx <
-@kindex < (Summary)
-@kindex A < (Summary)
-@findex gnus-summary-beginning-of-article
-Scroll to the beginning of the article
-(@code{gnus-summary-beginning-of-article}).
-
-@item A >
-@itemx >
-@kindex > (Summary)
-@kindex A > (Summary)
-@findex gnus-summary-end-of-article
-Scroll to the end of the article (@code{gnus-summary-end-of-article}).
-
-@item A s
-@itemx s
-@kindex A s (Summary)
-@kindex s (Summary)
-@findex gnus-summary-isearch-article
-Perform an isearch in the article buffer
-(@code{gnus-summary-isearch-article}).
-
-@item h
-@kindex h (Summary)
-@findex gnus-summary-select-article-buffer
-Select the article buffer (@code{gnus-summary-select-article-buffer}).
-
-@end table
-
-
-@node Reply Followup and Post
-@section Reply, Followup and Post
-
-@menu
-* Summary Mail Commands:: Sending mail.
-* Summary Post Commands:: Sending news.
-* Summary Message Commands:: Other Message-related commands.
-* Canceling and Superseding::
-@end menu
+@menu
+* Summary Mail Commands:: Sending mail.
+* Summary Post Commands:: Sending news.
+* Summary Message Commands:: Other Message-related commands.
+* Canceling and Superseding::
+@end menu
@node Summary Mail Commands
change this. The default value is @code{"X-Gnus-Delayed"}.
@end table
-The way delaying works is like this: when you use the
-@code{gnus-delay-article} command, you give a certain delay. Gnus
-calculates the deadline of the message and stores it in the
-@code{X-Gnus-Delayed} header and puts the message in the
-@code{nndraft:delayed} group.
+The way delaying works is like this: when you use the
+@code{gnus-delay-article} command, you give a certain delay. Gnus
+calculates the deadline of the message and stores it in the
+@code{X-Gnus-Delayed} header and puts the message in the
+@code{nndraft:delayed} group.
+
+@findex gnus-delay-send-queue
+And whenever you get new news, Gnus looks through the group for articles
+which are due and sends them. It uses the @code{gnus-delay-send-queue}
+function for this. By default, this function is added to the hook
+@code{gnus-get-new-news-hook}. But of course, you can change this.
+Maybe you want to use the demon to send drafts? Just tell the demon to
+execute the @code{gnus-delay-send-queue} function.
+
+@table @code
+@item gnus-delay-initialize
+@findex gnus-delay-initialize
+By default, this function installs @code{gnus-delay-send-queue} in
+@code{gnus-get-new-news-hook}. But it accepts the optional second
+argument @code{no-check}. If it is non-@code{nil},
+@code{gnus-get-new-news-hook} is not changed. The optional first
+argument is ignored.
+
+For example, @code{(gnus-delay-initialize nil t)} means to do nothing.
+Presumably, you want to use the demon for sending due delayed articles.
+Just don't forget to set that up :-)
+@end table
+
+When delaying an article with @kbd{C-c C-j}, Message mode will
+automatically add a @code{"Date"} header with the current time. In
+many cases you probably want the @code{"Date"} header to reflect the
+time the message is sent instead. To do this, you have to delete
+@code{Date} from @code{message-draft-headers}.
+
+
+@node Marking Articles
+@section Marking Articles
+@cindex article marking
+@cindex article ticking
+@cindex marks
+
+There are several marks you can set on an article.
+
+You have marks that decide the @dfn{readedness} (whoo, neato-keano
+neologism ohoy!) of the article. Alphabetic marks generally mean
+@dfn{read}, while non-alphabetic characters generally mean @dfn{unread}.
+
+In addition, you also have marks that do not affect readedness.
+
+@ifinfo
+There's a plethora of commands for manipulating these marks.
+@end ifinfo
+
+@menu
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
+@end menu
+
+
+@node Unread Articles
+@subsection Unread Articles
+
+The following marks mark articles as (kinda) unread, in one form or
+other.
+
+@table @samp
+@item !
+@vindex gnus-ticked-mark
+Marked as ticked (@code{gnus-ticked-mark}).
+
+@dfn{Ticked articles} are articles that will remain visible always. If
+you see an article that you find interesting, or you want to put off
+reading it, or replying to it, until sometime later, you'd typically
+tick it. However, articles can be expired (from news servers by the
+news server software, Gnus itself never expires ticked messages), so if
+you want to keep an article forever, you'll have to make it persistent
+(@pxref{Persistent Articles}).
+
+@item ?
+@vindex gnus-dormant-mark
+Marked as dormant (@code{gnus-dormant-mark}).
+
+@dfn{Dormant articles} will only appear in the summary buffer if there
+are followups to it. If you want to see them even if they don't have
+followups, you can use the @kbd{/ D} command (@pxref{Limiting}).
+Otherwise (except for the visibility issue), they are just like ticked
+messages.
+
+@item SPACE
+@vindex gnus-unread-mark
+Marked as unread (@code{gnus-unread-mark}).
+
+@dfn{Unread articles} are articles that haven't been read at all yet.
+@end table
+
+
+@node Read Articles
+@subsection Read Articles
+@cindex expirable mark
+
+All the following marks mark articles as read.
+
+@table @samp
+
+@item r
+@vindex gnus-del-mark
+These are articles that the user has marked as read with the @kbd{d}
+command manually, more or less (@code{gnus-del-mark}).
+
+@item R
+@vindex gnus-read-mark
+Articles that have actually been read (@code{gnus-read-mark}).
+
+@item O
+@vindex gnus-ancient-mark
+Articles that were marked as read in previous sessions and are now
+@dfn{old} (@code{gnus-ancient-mark}).
+
+@item K
+@vindex gnus-killed-mark
+Marked as killed (@code{gnus-killed-mark}).
+
+@item X
+@vindex gnus-kill-file-mark
+Marked as killed by kill files (@code{gnus-kill-file-mark}).
+
+@item Y
+@vindex gnus-low-score-mark
+Marked as read by having too low a score (@code{gnus-low-score-mark}).
+
+@item C
+@vindex gnus-catchup-mark
+Marked as read by a catchup (@code{gnus-catchup-mark}).
+
+@item G
+@vindex gnus-canceled-mark
+Canceled article (@code{gnus-canceled-mark})
+
+@item Q
+@vindex gnus-sparse-mark
+Sparsely reffed article (@code{gnus-sparse-mark}). @xref{Customizing
+Threading}.
+
+@item M
+@vindex gnus-duplicate-mark
+Article marked as read by duplicate suppression
+(@code{gnus-duplicate-mark}). @xref{Duplicate Suppression}.
+
+@end table
+
+All these marks just mean that the article is marked as read, really.
+They are interpreted differently when doing adaptive scoring, though.
+
+One more special mark, though:
+
+@table @samp
+@item E
+@vindex gnus-expirable-mark
+Marked as expirable (@code{gnus-expirable-mark}).
+
+Marking articles as @dfn{expirable} (or have them marked as such
+automatically) doesn't make much sense in normal groups---a user doesn't
+control expiring of news articles, but in mail groups, for instance,
+articles marked as @dfn{expirable} can be deleted by Gnus at
+any time.
+@end table
+
+
+@node Other Marks
+@subsection Other Marks
+@cindex process mark
+@cindex bookmarks
+
+There are some marks that have nothing to do with whether the article is
+read or not.
+
+@itemize @bullet
+
+@item
+You can set a bookmark in the current article. Say you are reading a
+long thesis on cats' urinary tracts, and have to go home for dinner
+before you've finished reading the thesis. You can then set a bookmark
+in the article, and Gnus will jump to this bookmark the next time it
+encounters the article. @xref{Setting Marks}.
+
+@item
+@vindex gnus-replied-mark
+All articles that you have replied to or made a followup to (i.e., have
+answered) will be marked with an @samp{A} in the second column
+(@code{gnus-replied-mark}).
+
+@item
+@vindex gnus-forwarded-mark
+All articles that you have forwarded will be marked with an @samp{F} in
+the second column (@code{gnus-forwarded-mark}).
+
+@item
+@vindex gnus-cached-mark
+Articles stored in the article cache will be marked with an @samp{*} in
+the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
+
+@item
+@vindex gnus-saved-mark
+Articles ``saved'' (in some manner or other; not necessarily
+religiously) are marked with an @samp{S} in the second column
+(@code{gnus-saved-mark}).
+
+@item
+@vindex gnus-recent-mark
+Articles that according to the server haven't been shown to the user
+before are marked with a @samp{N} in the second column
+(@code{gnus-recent-mark}). Note that not all servers support this
+mark, in which case it simply never appears. Compare with
+@code{gnus-unseen-mark}.
+
+@item
+@vindex gnus-unseen-mark
+Articles that haven't been seen before in Gnus by the user are marked
+with a @samp{.} in the second column (@code{gnus-unseen-mark}).
+Compare with @code{gnus-recent-mark}.
+
+@item
+@vindex gnus-downloaded-mark
+When using the Gnus agent (@pxref{Agent Basics}), articles may be
+downloaded for unplugged (offline) viewing. If you are using the
+@samp{%O} spec, these articles get the @samp{+} mark in that spec.
+(The variable @code{gnus-downloaded-mark} controls which character to
+use.)
+
+@item
+@vindex gnus-undownloaded-mark
+When using the Gnus agent (@pxref{Agent Basics}), some articles might
+not have been downloaded. Such articles cannot be viewed while you
+are unplugged (offline). If you are using the @samp{%O} spec, these
+articles get the @samp{-} mark in that spec. (The variable
+@code{gnus-undownloaded-mark} controls which character to use.)
-@findex gnus-delay-send-queue
-And whenever you get new news, Gnus looks through the group for articles
-which are due and sends them. It uses the @code{gnus-delay-send-queue}
-function for this. By default, this function is added to the hook
-@code{gnus-get-new-news-hook}. But of course, you can change this.
-Maybe you want to use the demon to send drafts? Just tell the demon to
-execute the @code{gnus-delay-send-queue} function.
+@item
+@vindex gnus-downloadable-mark
+The Gnus agent (@pxref{Agent Basics}) downloads some articles
+automatically, but it is also possible to explicitly mark articles for
+download, even if they would not be downloaded automatically. Such
+explicitly-marked articles get the @samp{%} mark in the first column.
+(The variable @code{gnus-downloadable-mark} controls which character to
+use.)
-@table @code
-@item gnus-delay-initialize
-@findex gnus-delay-initialize
-By default, this function installs @code{gnus-delay-send-queue} in
-@code{gnus-get-new-news-hook}. But it accepts the optional second
-argument @code{no-check}. If it is non-@code{nil},
-@code{gnus-get-new-news-hook} is not changed. The optional first
-argument is ignored.
+@item
+@vindex gnus-not-empty-thread-mark
+@vindex gnus-empty-thread-mark
+If the @samp{%e} spec is used, the presence of threads or not will be
+marked with @code{gnus-not-empty-thread-mark} and
+@code{gnus-empty-thread-mark} in the third column, respectively.
-For example, @code{(gnus-delay-initialize nil t)} means to do nothing.
-Presumably, you want to use the demon for sending due delayed articles.
-Just don't forget to set that up :-)
-@end table
+@item
+@vindex gnus-process-mark
+Finally we have the @dfn{process mark} (@code{gnus-process-mark}). A
+variety of commands react to the presence of the process mark. For
+instance, @kbd{X u} (@code{gnus-uu-decode-uu}) will uudecode and view
+all articles that have been marked with the process mark. Articles
+marked with the process mark have a @samp{#} in the second column.
-When delaying an article with @kbd{C-c C-j}, Message mode will
-automatically add a @code{"Date"} header with the current time. In
-many cases you probably want the @code{"Date"} header to reflect the
-time the message is sent instead. To do this, you have to delete
-@code{Date} from @code{message-draft-headers}.
+@end itemize
+You might have noticed that most of these ``non-readedness'' marks
+appear in the second column by default. So if you have a cached, saved,
+replied article that you have process-marked, what will that look like?
-@node Marking Articles
-@section Marking Articles
-@cindex article marking
-@cindex article ticking
-@cindex marks
+Nothing much. The precedence rules go as follows: process -> cache ->
+replied -> saved. So if the article is in the cache and is replied,
+you'll only see the cache mark and not the replied mark.
-There are several marks you can set on an article.
-You have marks that decide the @dfn{readedness} (whoo, neato-keano
-neologism ohoy!) of the article. Alphabetic marks generally mean
-@dfn{read}, while non-alphabetic characters generally mean @dfn{unread}.
+@node Setting Marks
+@subsection Setting Marks
+@cindex setting marks
-In addition, you also have marks that do not affect readedness.
+All the marking commands understand the numeric prefix.
-@ifinfo
-There's a plethora of commands for manipulating these marks.
-@end ifinfo
+@table @kbd
+@item M c
+@itemx M-u
+@kindex M c (Summary)
+@kindex M-u (Summary)
+@findex gnus-summary-clear-mark-forward
+@cindex mark as unread
+Clear all readedness-marks from the current article
+(@code{gnus-summary-clear-mark-forward}). In other words, mark the
+article as unread.
-@menu
-* Unread Articles:: Marks for unread articles.
-* Read Articles:: Marks for read articles.
-* Other Marks:: Marks that do not affect readedness.
-* Setting Marks:: How to set and remove marks.
-* Generic Marking Commands:: How to customize the marking.
-* Setting Process Marks:: How to mark articles for later processing.
-@end menu
+@item M t
+@itemx !
+@kindex ! (Summary)
+@kindex M t (Summary)
+@findex gnus-summary-tick-article-forward
+Tick the current article (@code{gnus-summary-tick-article-forward}).
+@xref{Article Caching}.
+@item M ?
+@itemx ?
+@kindex ? (Summary)
+@kindex M ? (Summary)
+@findex gnus-summary-mark-as-dormant
+Mark the current article as dormant
+(@code{gnus-summary-mark-as-dormant}). @xref{Article Caching}.
-@node Unread Articles
-@subsection Unread Articles
+@item M d
+@itemx d
+@kindex M d (Summary)
+@kindex d (Summary)
+@findex gnus-summary-mark-as-read-forward
+Mark the current article as read
+(@code{gnus-summary-mark-as-read-forward}).
-The following marks mark articles as (kinda) unread, in one form or
-other.
+@item D
+@kindex D (Summary)
+@findex gnus-summary-mark-as-read-backward
+Mark the current article as read and move point to the previous line
+(@code{gnus-summary-mark-as-read-backward}).
-@table @samp
-@item !
-@vindex gnus-ticked-mark
-Marked as ticked (@code{gnus-ticked-mark}).
+@item M k
+@itemx k
+@kindex k (Summary)
+@kindex M k (Summary)
+@findex gnus-summary-kill-same-subject-and-select
+Mark all articles that have the same subject as the current one as read,
+and then select the next unread article
+(@code{gnus-summary-kill-same-subject-and-select}).
-@dfn{Ticked articles} are articles that will remain visible always. If
-you see an article that you find interesting, or you want to put off
-reading it, or replying to it, until sometime later, you'd typically
-tick it. However, articles can be expired (from news servers by the
-news server software, Gnus itself never expires ticked messages), so if
-you want to keep an article forever, you'll have to make it persistent
-(@pxref{Persistent Articles}).
+@item M K
+@itemx C-k
+@kindex M K (Summary)
+@kindex C-k (Summary)
+@findex gnus-summary-kill-same-subject
+Mark all articles that have the same subject as the current one as read
+(@code{gnus-summary-kill-same-subject}).
-@item ?
-@vindex gnus-dormant-mark
-Marked as dormant (@code{gnus-dormant-mark}).
+@item M C
+@kindex M C (Summary)
+@findex gnus-summary-catchup
+@c @icon{gnus-summary-catchup}
+Mark all unread articles as read (@code{gnus-summary-catchup}).
-@dfn{Dormant articles} will only appear in the summary buffer if there
-are followups to it. If you want to see them even if they don't have
-followups, you can use the @kbd{/ D} command (@pxref{Limiting}).
-Otherwise (except for the visibility issue), they are just like ticked
-messages.
+@item M C-c
+@kindex M C-c (Summary)
+@findex gnus-summary-catchup-all
+Mark all articles in the group as read---even the ticked and dormant
+articles (@code{gnus-summary-catchup-all}).
-@item SPACE
-@vindex gnus-unread-mark
-Marked as unread (@code{gnus-unread-mark}).
+@item M H
+@kindex M H (Summary)
+@findex gnus-summary-catchup-to-here
+Catchup the current group to point (before the point)
+(@code{gnus-summary-catchup-to-here}).
-@dfn{Unread articles} are articles that haven't been read at all yet.
-@end table
+@item M h
+@kindex M h (Summary)
+@findex gnus-summary-catchup-from-here
+Catchup the current group from point (after the point)
+(@code{gnus-summary-catchup-from-here}).
+
+@item C-w
+@kindex C-w (Summary)
+@findex gnus-summary-mark-region-as-read
+Mark all articles between point and mark as read
+(@code{gnus-summary-mark-region-as-read}).
+@item M V k
+@kindex M V k (Summary)
+@findex gnus-summary-kill-below
+Kill all articles with scores below the default score (or below the
+numeric prefix) (@code{gnus-summary-kill-below}).
-@node Read Articles
-@subsection Read Articles
-@cindex expirable mark
+@item M e
+@itemx E
+@kindex M e (Summary)
+@kindex E (Summary)
+@findex gnus-summary-mark-as-expirable
+Mark the current article as expirable
+(@code{gnus-summary-mark-as-expirable}).
-All the following marks mark articles as read.
+@item M b
+@kindex M b (Summary)
+@findex gnus-summary-set-bookmark
+Set a bookmark in the current article
+(@code{gnus-summary-set-bookmark}).
-@table @samp
+@item M B
+@kindex M B (Summary)
+@findex gnus-summary-remove-bookmark
+Remove the bookmark from the current article
+(@code{gnus-summary-remove-bookmark}).
-@item r
-@vindex gnus-del-mark
-These are articles that the user has marked as read with the @kbd{d}
-command manually, more or less (@code{gnus-del-mark}).
+@item M V c
+@kindex M V c (Summary)
+@findex gnus-summary-clear-above
+Clear all marks from articles with scores over the default score (or
+over the numeric prefix) (@code{gnus-summary-clear-above}).
-@item R
-@vindex gnus-read-mark
-Articles that have actually been read (@code{gnus-read-mark}).
+@item M V u
+@kindex M V u (Summary)
+@findex gnus-summary-tick-above
+Tick all articles with scores over the default score (or over the
+numeric prefix) (@code{gnus-summary-tick-above}).
-@item O
-@vindex gnus-ancient-mark
-Articles that were marked as read in previous sessions and are now
-@dfn{old} (@code{gnus-ancient-mark}).
+@item M V m
+@kindex M V m (Summary)
+@findex gnus-summary-mark-above
+Prompt for a mark, and mark all articles with scores over the default
+score (or over the numeric prefix) with this mark
+(@code{gnus-summary-clear-above}).
+@end table
-@item K
-@vindex gnus-killed-mark
-Marked as killed (@code{gnus-killed-mark}).
+@vindex gnus-summary-goto-unread
+The @code{gnus-summary-goto-unread} variable controls what action should
+be taken after setting a mark. If non-@code{nil}, point will move to
+the next/previous unread article. If @code{nil}, point will just move
+one line up or down. As a special case, if this variable is
+@code{never}, all the marking commands as well as other commands (like
+@kbd{SPACE}) will move to the next article, whether it is unread or not.
+The default is @code{t}.
-@item X
-@vindex gnus-kill-file-mark
-Marked as killed by kill files (@code{gnus-kill-file-mark}).
-@item Y
-@vindex gnus-low-score-mark
-Marked as read by having too low a score (@code{gnus-low-score-mark}).
+@node Generic Marking Commands
+@subsection Generic Marking Commands
-@item C
-@vindex gnus-catchup-mark
-Marked as read by a catchup (@code{gnus-catchup-mark}).
+Some people would like the command that ticks an article (@kbd{!}) go to
+the next article. Others would like it to go to the next unread
+article. Yet others would like it to stay on the current article. And
+even though I haven't heard of anybody wanting it to go to the
+previous (unread) article, I'm sure there are people that want that as
+well.
-@item G
-@vindex gnus-canceled-mark
-Canceled article (@code{gnus-canceled-mark})
+Multiply these five behaviors with five different marking commands, and
+you get a potentially complex set of variable to control what each
+command should do.
-@item Q
-@vindex gnus-sparse-mark
-Sparsely reffed article (@code{gnus-sparse-mark}). @xref{Customizing
-Threading}.
+To sidestep that mess, Gnus provides commands that do all these
+different things. They can be found on the @kbd{M M} map in the summary
+buffer. Type @kbd{M M C-h} to see them all---there are too many of them
+to list in this manual.
-@item M
-@vindex gnus-duplicate-mark
-Article marked as read by duplicate suppression
-(@code{gnus-duplicate-mark}). @xref{Duplicate Suppression}.
+While you can use these commands directly, most users would prefer
+altering the summary mode keymap. For instance, if you would like the
+@kbd{!} command to go to the next article instead of the next unread
+article, you could say something like:
-@end table
+@lisp
+@group
+(add-hook 'gnus-summary-mode-hook 'my-alter-summary-map)
+(defun my-alter-summary-map ()
+ (local-set-key "!" 'gnus-summary-put-mark-as-ticked-next))
+@end group
+@end lisp
-All these marks just mean that the article is marked as read, really.
-They are interpreted differently when doing adaptive scoring, though.
+@noindent
+or
-One more special mark, though:
+@lisp
+(defun my-alter-summary-map ()
+ (local-set-key "!" "MM!n"))
+@end lisp
-@table @samp
-@item E
-@vindex gnus-expirable-mark
-Marked as expirable (@code{gnus-expirable-mark}).
-Marking articles as @dfn{expirable} (or have them marked as such
-automatically) doesn't make much sense in normal groups---a user doesn't
-control expiring of news articles, but in mail groups, for instance,
-articles marked as @dfn{expirable} can be deleted by Gnus at
-any time.
-@end table
+@node Setting Process Marks
+@subsection Setting Process Marks
+@cindex setting process marks
+Process marks are displayed as @code{#} in the summary buffer, and are
+used for marking articles in such a way that other commands will
+process these articles. For instance, if you process mark four
+articles and then use the @kbd{*} command, Gnus will enter these four
+articles into the cache. For more information,
+@pxref{Process/Prefix}.
-@node Other Marks
-@subsection Other Marks
-@cindex process mark
-@cindex bookmarks
+@table @kbd
-There are some marks that have nothing to do with whether the article is
-read or not.
+@item M P p
+@itemx #
+@kindex # (Summary)
+@kindex M P p (Summary)
+@findex gnus-summary-mark-as-processable
+Mark the current article with the process mark
+(@code{gnus-summary-mark-as-processable}).
+@findex gnus-summary-unmark-as-processable
-@itemize @bullet
+@item M P u
+@itemx M-#
+@kindex M P u (Summary)
+@kindex M-# (Summary)
+Remove the process mark, if any, from the current article
+(@code{gnus-summary-unmark-as-processable}).
-@item
-You can set a bookmark in the current article. Say you are reading a
-long thesis on cats' urinary tracts, and have to go home for dinner
-before you've finished reading the thesis. You can then set a bookmark
-in the article, and Gnus will jump to this bookmark the next time it
-encounters the article. @xref{Setting Marks}.
+@item M P U
+@kindex M P U (Summary)
+@findex gnus-summary-unmark-all-processable
+Remove the process mark from all articles
+(@code{gnus-summary-unmark-all-processable}).
-@item
-@vindex gnus-replied-mark
-All articles that you have replied to or made a followup to (i.e., have
-answered) will be marked with an @samp{A} in the second column
-(@code{gnus-replied-mark}).
+@item M P i
+@kindex M P i (Summary)
+@findex gnus-uu-invert-processable
+Invert the list of process marked articles
+(@code{gnus-uu-invert-processable}).
-@item
-@vindex gnus-forwarded-mark
-All articles that you have forwarded will be marked with an @samp{F} in
-the second column (@code{gnus-forwarded-mark}).
+@item M P R
+@kindex M P R (Summary)
+@findex gnus-uu-mark-by-regexp
+Mark articles that have a @code{Subject} header that matches a regular
+expression (@code{gnus-uu-mark-by-regexp}).
-@item
-@vindex gnus-cached-mark
-Articles stored in the article cache will be marked with an @samp{*} in
-the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
+@item M P G
+@kindex M P G (Summary)
+@findex gnus-uu-unmark-by-regexp
+Unmark articles that have a @code{Subject} header that matches a regular
+expression (@code{gnus-uu-unmark-by-regexp}).
-@item
-@vindex gnus-saved-mark
-Articles ``saved'' (in some manner or other; not necessarily
-religiously) are marked with an @samp{S} in the second column
-(@code{gnus-saved-mark}).
+@item M P r
+@kindex M P r (Summary)
+@findex gnus-uu-mark-region
+Mark articles in region (@code{gnus-uu-mark-region}).
-@item
-@vindex gnus-recent-mark
-Articles that according to the server haven't been shown to the user
-before are marked with a @samp{N} in the second column
-(@code{gnus-recent-mark}). Note that not all servers support this
-mark, in which case it simply never appears. Compare with
-@code{gnus-unseen-mark}.
+@item M P g
+@kindex M P g (Summary)
+@findex gnus-uu-unmark-region
+Unmark articles in region (@code{gnus-uu-unmark-region}).
-@item
-@vindex gnus-unseen-mark
-Articles that haven't been seen before in Gnus by the user are marked
-with a @samp{.} in the second column (@code{gnus-unseen-mark}).
-Compare with @code{gnus-recent-mark}.
+@item M P t
+@kindex M P t (Summary)
+@findex gnus-uu-mark-thread
+Mark all articles in the current (sub)thread
+(@code{gnus-uu-mark-thread}).
-@item
-@vindex gnus-downloaded-mark
-When using the Gnus agent (@pxref{Agent Basics}), articles may be
-downloaded for unplugged (offline) viewing. If you are using the
-@samp{%O} spec, these articles get the @samp{+} mark in that spec.
-(The variable @code{gnus-downloaded-mark} controls which character to
-use.)
+@item M P T
+@kindex M P T (Summary)
+@findex gnus-uu-unmark-thread
+Unmark all articles in the current (sub)thread
+(@code{gnus-uu-unmark-thread}).
-@item
-@vindex gnus-undownloaded-mark
-When using the Gnus agent (@pxref{Agent Basics}), some articles might
-not have been downloaded. Such articles cannot be viewed while you
-are unplugged (offline). If you are using the @samp{%O} spec, these
-articles get the @samp{-} mark in that spec. (The variable
-@code{gnus-undownloaded-mark} controls which character to use.)
+@item M P v
+@kindex M P v (Summary)
+@findex gnus-uu-mark-over
+Mark all articles that have a score above the prefix argument
+(@code{gnus-uu-mark-over}).
-@item
-@vindex gnus-downloadable-mark
-The Gnus agent (@pxref{Agent Basics}) downloads some articles
-automatically, but it is also possible to explicitly mark articles for
-download, even if they would not be downloaded automatically. Such
-explicitly-marked articles get the @samp{%} mark in the first column.
-(The variable @code{gnus-downloadable-mark} controls which character to
-use.)
+@item M P s
+@kindex M P s (Summary)
+@findex gnus-uu-mark-series
+Mark all articles in the current series (@code{gnus-uu-mark-series}).
-@item
-@vindex gnus-not-empty-thread-mark
-@vindex gnus-empty-thread-mark
-If the @samp{%e} spec is used, the presence of threads or not will be
-marked with @code{gnus-not-empty-thread-mark} and
-@code{gnus-empty-thread-mark} in the third column, respectively.
+@item M P S
+@kindex M P S (Summary)
+@findex gnus-uu-mark-sparse
+Mark all series that have already had some articles marked
+(@code{gnus-uu-mark-sparse}).
-@item
-@vindex gnus-process-mark
-Finally we have the @dfn{process mark} (@code{gnus-process-mark}). A
-variety of commands react to the presence of the process mark. For
-instance, @kbd{X u} (@code{gnus-uu-decode-uu}) will uudecode and view
-all articles that have been marked with the process mark. Articles
-marked with the process mark have a @samp{#} in the second column.
+@item M P a
+@kindex M P a (Summary)
+@findex gnus-uu-mark-all
+Mark all articles in series order (@code{gnus-uu-mark-all}).
-@end itemize
+@item M P b
+@kindex M P b (Summary)
+@findex gnus-uu-mark-buffer
+Mark all articles in the buffer in the order they appear
+(@code{gnus-uu-mark-buffer}).
-You might have noticed that most of these ``non-readedness'' marks
-appear in the second column by default. So if you have a cached, saved,
-replied article that you have process-marked, what will that look like?
+@item M P k
+@kindex M P k (Summary)
+@findex gnus-summary-kill-process-mark
+Push the current process mark set onto the stack and unmark all articles
+(@code{gnus-summary-kill-process-mark}).
-Nothing much. The precedence rules go as follows: process -> cache ->
-replied -> saved. So if the article is in the cache and is replied,
-you'll only see the cache mark and not the replied mark.
+@item M P y
+@kindex M P y (Summary)
+@findex gnus-summary-yank-process-mark
+Pop the previous process mark set from the stack and restore it
+(@code{gnus-summary-yank-process-mark}).
+@item M P w
+@kindex M P w (Summary)
+@findex gnus-summary-save-process-mark
+Push the current process mark set onto the stack
+(@code{gnus-summary-save-process-mark}).
-@node Setting Marks
-@subsection Setting Marks
-@cindex setting marks
+@end table
-All the marking commands understand the numeric prefix.
+Also see the @kbd{&} command in @ref{Searching for Articles}, for how to
+set process marks based on article body contents.
-@table @kbd
-@item M c
-@itemx M-u
-@kindex M c (Summary)
-@kindex M-u (Summary)
-@findex gnus-summary-clear-mark-forward
-@cindex mark as unread
-Clear all readedness-marks from the current article
-(@code{gnus-summary-clear-mark-forward}). In other words, mark the
-article as unread.
-@item M t
-@itemx !
-@kindex ! (Summary)
-@kindex M t (Summary)
-@findex gnus-summary-tick-article-forward
-Tick the current article (@code{gnus-summary-tick-article-forward}).
-@xref{Article Caching}.
+@node Limiting
+@section Limiting
+@cindex limiting
-@item M ?
-@itemx ?
-@kindex ? (Summary)
-@kindex M ? (Summary)
-@findex gnus-summary-mark-as-dormant
-Mark the current article as dormant
-(@code{gnus-summary-mark-as-dormant}). @xref{Article Caching}.
+It can be convenient to limit the summary buffer to just show some
+subset of the articles currently in the group. The effect most limit
+commands have is to remove a few (or many) articles from the summary
+buffer.
-@item M d
-@itemx d
-@kindex M d (Summary)
-@kindex d (Summary)
-@findex gnus-summary-mark-as-read-forward
-Mark the current article as read
-(@code{gnus-summary-mark-as-read-forward}).
+Limiting commands work on subsets of the articles already fetched from
+the servers. These commands don't query the server for additional
+articles.
-@item D
-@kindex D (Summary)
-@findex gnus-summary-mark-as-read-backward
-Mark the current article as read and move point to the previous line
-(@code{gnus-summary-mark-as-read-backward}).
+@table @kbd
-@item M k
-@itemx k
-@kindex k (Summary)
-@kindex M k (Summary)
-@findex gnus-summary-kill-same-subject-and-select
-Mark all articles that have the same subject as the current one as read,
-and then select the next unread article
-(@code{gnus-summary-kill-same-subject-and-select}).
+@item / /
+@itemx / s
+@kindex / / (Summary)
+@findex gnus-summary-limit-to-subject
+Limit the summary buffer to articles that match some subject
+(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
+matching articles.
-@item M K
-@itemx C-k
-@kindex M K (Summary)
-@kindex C-k (Summary)
-@findex gnus-summary-kill-same-subject
-Mark all articles that have the same subject as the current one as read
-(@code{gnus-summary-kill-same-subject}).
+@item / a
+@kindex / a (Summary)
+@findex gnus-summary-limit-to-author
+Limit the summary buffer to articles that match some author
+(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
+matching articles.
-@item M C
-@kindex M C (Summary)
-@findex gnus-summary-catchup
-@c @icon{gnus-summary-catchup}
-Mark all unread articles as read (@code{gnus-summary-catchup}).
+@item / R
+@kindex / R (Summary)
+@findex gnus-summary-limit-to-recipient
+Limit the summary buffer to articles that match some recipient
+(@code{gnus-summary-limit-to-recipient}). If given a prefix, exclude
+matching articles.
-@item M C-c
-@kindex M C-c (Summary)
-@findex gnus-summary-catchup-all
-Mark all articles in the group as read---even the ticked and dormant
-articles (@code{gnus-summary-catchup-all}).
+@item / A
+@kindex / A (Summary)
+@findex gnus-summary-limit-to-address
+Limit the summary buffer to articles in which contents of From, To or Cc
+header match a given address (@code{gnus-summary-limit-to-address}). If
+given a prefix, exclude matching articles.
-@item M H
-@kindex M H (Summary)
-@findex gnus-summary-catchup-to-here
-Catchup the current group to point (before the point)
-(@code{gnus-summary-catchup-to-here}).
+@item / S
+@kindex / S (Summary)
+@findex gnus-summary-limit-to-singletons
+Limit the summary buffer to articles that aren't part of any displayed
+threads (@code{gnus-summary-limit-to-singletons}). If given a prefix,
+limit to articles that are part of displayed threads.
-@item M h
-@kindex M h (Summary)
-@findex gnus-summary-catchup-from-here
-Catchup the current group from point (after the point)
-(@code{gnus-summary-catchup-from-here}).
+@item / x
+@kindex / x (Summary)
+@findex gnus-summary-limit-to-extra
+Limit the summary buffer to articles that match one of the ``extra''
+headers (@pxref{To From Newsgroups})
+(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
+matching articles.
-@item C-w
-@kindex C-w (Summary)
-@findex gnus-summary-mark-region-as-read
-Mark all articles between point and mark as read
-(@code{gnus-summary-mark-region-as-read}).
+@item / u
+@itemx x
+@kindex / u (Summary)
+@kindex x (Summary)
+@findex gnus-summary-limit-to-unread
+Limit the summary buffer to articles not marked as read
+(@code{gnus-summary-limit-to-unread}). If given a prefix, limit the
+buffer to articles strictly unread. This means that ticked and
+dormant articles will also be excluded.
-@item M V k
-@kindex M V k (Summary)
-@findex gnus-summary-kill-below
-Kill all articles with scores below the default score (or below the
-numeric prefix) (@code{gnus-summary-kill-below}).
+@item / m
+@kindex / m (Summary)
+@findex gnus-summary-limit-to-marks
+Ask for a mark and then limit to all articles that have been marked
+with that mark (@code{gnus-summary-limit-to-marks}).
-@item M e
-@itemx E
-@kindex M e (Summary)
-@kindex E (Summary)
-@findex gnus-summary-mark-as-expirable
-Mark the current article as expirable
-(@code{gnus-summary-mark-as-expirable}).
+@item / t
+@kindex / t (Summary)
+@findex gnus-summary-limit-to-age
+Ask for a number and then limit the summary buffer to articles older than (or equal to) that number of days
+(@code{gnus-summary-limit-to-age}). If given a prefix, limit to
+articles younger than that number of days.
-@item M b
-@kindex M b (Summary)
-@findex gnus-summary-set-bookmark
-Set a bookmark in the current article
-(@code{gnus-summary-set-bookmark}).
+@item / n
+@kindex / n (Summary)
+@findex gnus-summary-limit-to-articles
+With prefix @samp{n}, limit the summary buffer to the next @samp{n}
+articles. If not given a prefix, use the process marked articles
+instead. (@code{gnus-summary-limit-to-articles}).
-@item M B
-@kindex M B (Summary)
-@findex gnus-summary-remove-bookmark
-Remove the bookmark from the current article
-(@code{gnus-summary-remove-bookmark}).
+@item / w
+@kindex / w (Summary)
+@findex gnus-summary-pop-limit
+Pop the previous limit off the stack and restore it
+(@code{gnus-summary-pop-limit}). If given a prefix, pop all limits off
+the stack.
-@item M V c
-@kindex M V c (Summary)
-@findex gnus-summary-clear-above
-Clear all marks from articles with scores over the default score (or
-over the numeric prefix) (@code{gnus-summary-clear-above}).
+@item / .
+@kindex / . (Summary)
+@findex gnus-summary-limit-to-unseen
+Limit the summary buffer to the unseen articles
+(@code{gnus-summary-limit-to-unseen}).
-@item M V u
-@kindex M V u (Summary)
-@findex gnus-summary-tick-above
-Tick all articles with scores over the default score (or over the
-numeric prefix) (@code{gnus-summary-tick-above}).
+@item / v
+@kindex / v (Summary)
+@findex gnus-summary-limit-to-score
+Limit the summary buffer to articles that have a score at or above some
+score (@code{gnus-summary-limit-to-score}).
-@item M V m
-@kindex M V m (Summary)
-@findex gnus-summary-mark-above
-Prompt for a mark, and mark all articles with scores over the default
-score (or over the numeric prefix) with this mark
-(@code{gnus-summary-clear-above}).
-@end table
+@item / p
+@kindex / p (Summary)
+@findex gnus-summary-limit-to-display-predicate
+Limit the summary buffer to articles that satisfy the @code{display}
+group parameter predicate
+(@code{gnus-summary-limit-to-display-predicate}). @xref{Group
+Parameters}, for more on this predicate.
-@vindex gnus-summary-goto-unread
-The @code{gnus-summary-goto-unread} variable controls what action should
-be taken after setting a mark. If non-@code{nil}, point will move to
-the next/previous unread article. If @code{nil}, point will just move
-one line up or down. As a special case, if this variable is
-@code{never}, all the marking commands as well as other commands (like
-@kbd{SPACE}) will move to the next article, whether it is unread or not.
-The default is @code{t}.
+@item / r
+@kindex / r (Summary)
+@findex gnus-summary-limit-to-replied
+Limit the summary buffer to replied articles
+(@code{gnus-summary-limit-to-replied}). If given a prefix, exclude
+replied articles.
+@item / E
+@itemx M S
+@kindex M S (Summary)
+@kindex / E (Summary)
+@findex gnus-summary-limit-include-expunged
+Include all expunged articles in the limit
+(@code{gnus-summary-limit-include-expunged}).
-@node Generic Marking Commands
-@subsection Generic Marking Commands
+@item / D
+@kindex / D (Summary)
+@findex gnus-summary-limit-include-dormant
+Include all dormant articles in the limit
+(@code{gnus-summary-limit-include-dormant}).
-Some people would like the command that ticks an article (@kbd{!}) go to
-the next article. Others would like it to go to the next unread
-article. Yet others would like it to stay on the current article. And
-even though I haven't heard of anybody wanting it to go to the
-previous (unread) article, I'm sure there are people that want that as
-well.
+@item / *
+@kindex / * (Summary)
+@findex gnus-summary-limit-include-cached
+Include all cached articles in the limit
+(@code{gnus-summary-limit-include-cached}).
-Multiply these five behaviors with five different marking commands, and
-you get a potentially complex set of variable to control what each
-command should do.
+@item / d
+@kindex / d (Summary)
+@findex gnus-summary-limit-exclude-dormant
+Exclude all dormant articles from the limit
+(@code{gnus-summary-limit-exclude-dormant}).
-To sidestep that mess, Gnus provides commands that do all these
-different things. They can be found on the @kbd{M M} map in the summary
-buffer. Type @kbd{M M C-h} to see them all---there are too many of them
-to list in this manual.
+@item / M
+@kindex / M (Summary)
+@findex gnus-summary-limit-exclude-marks
+Exclude all marked articles (@code{gnus-summary-limit-exclude-marks}).
-While you can use these commands directly, most users would prefer
-altering the summary mode keymap. For instance, if you would like the
-@kbd{!} command to go to the next article instead of the next unread
-article, you could say something like:
+@item / T
+@kindex / T (Summary)
+@findex gnus-summary-limit-include-thread
+Include all the articles in the current thread in the limit.
-@lisp
-@group
-(add-hook 'gnus-summary-mode-hook 'my-alter-summary-map)
-(defun my-alter-summary-map ()
- (local-set-key "!" 'gnus-summary-put-mark-as-ticked-next))
-@end group
-@end lisp
+@item / c
+@kindex / c (Summary)
+@findex gnus-summary-limit-exclude-childless-dormant
+Exclude all dormant articles that have no children from the limit@*
+(@code{gnus-summary-limit-exclude-childless-dormant}).
-@noindent
-or
+@item / C
+@kindex / C (Summary)
+@findex gnus-summary-limit-mark-excluded-as-read
+Mark all excluded unread articles as read
+(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
+also mark excluded ticked and dormant articles as read.
-@lisp
-(defun my-alter-summary-map ()
- (local-set-key "!" "MM!n"))
-@end lisp
+@item / b
+@kindex / b (Summary)
+@findex gnus-summary-limit-to-bodies
+Limit the summary buffer to articles that have bodies that match a
+certain regexp (@code{gnus-summary-limit-to-bodies}). If given a
+prefix, reverse the limit. This command is quite slow since it
+requires selecting each article to find the matches.
+@item / h
+@kindex / h (Summary)
+@findex gnus-summary-limit-to-headers
+Like the previous command, only limit to headers instead
+(@code{gnus-summary-limit-to-headers}).
-@node Setting Process Marks
-@subsection Setting Process Marks
-@cindex setting process marks
+@end table
-Process marks are displayed as @code{#} in the summary buffer, and are
-used for marking articles in such a way that other commands will
-process these articles. For instance, if you process mark four
-articles and then use the @kbd{*} command, Gnus will enter these four
-articles into the cache. For more information,
-@pxref{Process/Prefix}.
+
+The following commands aren't limiting commands, but use the @kbd{/}
+prefix as well.
@table @kbd
+@item / N
+@kindex / N (Summary)
+@findex gnus-summary-insert-new-articles
+Insert all new articles in the summary buffer. It scans for new emails
+if @var{back-end}@code{-get-new-mail} is non-@code{nil}.
-@item M P p
-@itemx #
-@kindex # (Summary)
-@kindex M P p (Summary)
-@findex gnus-summary-mark-as-processable
-Mark the current article with the process mark
-(@code{gnus-summary-mark-as-processable}).
-@findex gnus-summary-unmark-as-processable
+@item / o
+@kindex / o (Summary)
+@findex gnus-summary-insert-old-articles
+Insert all old articles in the summary buffer. If given a numbered
+prefix, fetch this number of articles.
-@item M P u
-@itemx M-#
-@kindex M P u (Summary)
-@kindex M-# (Summary)
-Remove the process mark, if any, from the current article
-(@code{gnus-summary-unmark-as-processable}).
+@end table
-@item M P U
-@kindex M P U (Summary)
-@findex gnus-summary-unmark-all-processable
-Remove the process mark from all articles
-(@code{gnus-summary-unmark-all-processable}).
-@item M P i
-@kindex M P i (Summary)
-@findex gnus-uu-invert-processable
-Invert the list of process marked articles
-(@code{gnus-uu-invert-processable}).
+@node Threading
+@section Threading
+@cindex threading
+@cindex article threading
-@item M P R
-@kindex M P R (Summary)
-@findex gnus-uu-mark-by-regexp
-Mark articles that have a @code{Subject} header that matches a regular
-expression (@code{gnus-uu-mark-by-regexp}).
+Gnus threads articles by default. @dfn{To thread} is to put responses
+to articles directly after the articles they respond to---in a
+hierarchical fashion.
-@item M P G
-@kindex M P G (Summary)
-@findex gnus-uu-unmark-by-regexp
-Unmark articles that have a @code{Subject} header that matches a regular
-expression (@code{gnus-uu-unmark-by-regexp}).
+Threading is done by looking at the @code{References} headers of the
+articles. In a perfect world, this would be enough to build pretty
+trees, but unfortunately, the @code{References} header is often broken
+or simply missing. Weird news propagation exacerbates the problem,
+so one has to employ other heuristics to get pleasing results. A
+plethora of approaches exists, as detailed in horrible detail in
+@ref{Customizing Threading}.
-@item M P r
-@kindex M P r (Summary)
-@findex gnus-uu-mark-region
-Mark articles in region (@code{gnus-uu-mark-region}).
+First, a quick overview of the concepts:
-@item M P g
-@kindex M P g (Summary)
-@findex gnus-uu-unmark-region
-Unmark articles in region (@code{gnus-uu-unmark-region}).
+@table @dfn
+@item root
+The top-most article in a thread; the first article in the thread.
-@item M P t
-@kindex M P t (Summary)
-@findex gnus-uu-mark-thread
-Mark all articles in the current (sub)thread
-(@code{gnus-uu-mark-thread}).
+@item thread
+A tree-like article structure.
-@item M P T
-@kindex M P T (Summary)
-@findex gnus-uu-unmark-thread
-Unmark all articles in the current (sub)thread
-(@code{gnus-uu-unmark-thread}).
+@item sub-thread
+A small(er) section of this tree-like structure.
-@item M P v
-@kindex M P v (Summary)
-@findex gnus-uu-mark-over
-Mark all articles that have a score above the prefix argument
-(@code{gnus-uu-mark-over}).
+@item loose threads
+Threads often lose their roots due to article expiry, or due to the root
+already having been read in a previous session, and not displayed in the
+summary buffer. We then typically have many sub-threads that really
+belong to one thread, but are without connecting roots. These are
+called loose threads.
-@item M P s
-@kindex M P s (Summary)
-@findex gnus-uu-mark-series
-Mark all articles in the current series (@code{gnus-uu-mark-series}).
+@item thread gathering
+An attempt to gather loose threads into bigger threads.
-@item M P S
-@kindex M P S (Summary)
-@findex gnus-uu-mark-sparse
-Mark all series that have already had some articles marked
-(@code{gnus-uu-mark-sparse}).
+@item sparse threads
+A thread where the missing articles have been ``guessed'' at, and are
+displayed as empty lines in the summary buffer.
-@item M P a
-@kindex M P a (Summary)
-@findex gnus-uu-mark-all
-Mark all articles in series order (@code{gnus-uu-mark-all}).
+@end table
-@item M P b
-@kindex M P b (Summary)
-@findex gnus-uu-mark-buffer
-Mark all articles in the buffer in the order they appear
-(@code{gnus-uu-mark-buffer}).
-@item M P k
-@kindex M P k (Summary)
-@findex gnus-summary-kill-process-mark
-Push the current process mark set onto the stack and unmark all articles
-(@code{gnus-summary-kill-process-mark}).
+@menu
+* Customizing Threading:: Variables you can change to affect the threading.
+* Thread Commands:: Thread based commands in the summary buffer.
+@end menu
-@item M P y
-@kindex M P y (Summary)
-@findex gnus-summary-yank-process-mark
-Pop the previous process mark set from the stack and restore it
-(@code{gnus-summary-yank-process-mark}).
-@item M P w
-@kindex M P w (Summary)
-@findex gnus-summary-save-process-mark
-Push the current process mark set onto the stack
-(@code{gnus-summary-save-process-mark}).
+@node Customizing Threading
+@subsection Customizing Threading
+@cindex customizing threading
-@end table
+@menu
+* Loose Threads:: How Gnus gathers loose threads into bigger threads.
+* Filling In Threads:: Making the threads displayed look fuller.
+* More Threading:: Even more variables for fiddling with threads.
+* Low-Level Threading:: You thought it was over@dots{} but you were wrong!
+@end menu
-Also see the @kbd{&} command in @ref{Searching for Articles}, for how to
-set process marks based on article body contents.
+@node Loose Threads
+@subsubsection Loose Threads
+@cindex <
+@cindex >
+@cindex loose threads
-@node Limiting
-@section Limiting
-@cindex limiting
+@table @code
+@item gnus-summary-make-false-root
+@vindex gnus-summary-make-false-root
+If non-@code{nil}, Gnus will gather all loose subtrees into one big tree
+and create a dummy root at the top. (Wait a minute. Root at the top?
+Yup.) Loose subtrees occur when the real root has expired, or you've
+read or killed the root in a previous session.
-It can be convenient to limit the summary buffer to just show some
-subset of the articles currently in the group. The effect most limit
-commands have is to remove a few (or many) articles from the summary
-buffer.
+When there is no real root of a thread, Gnus will have to fudge
+something. This variable says what fudging method Gnus should use.
+There are four possible values:
+
+@iftex
+@iflatex
+\gnusfigure{The Summary Buffer}{390}{
+\put(0,0){\epsfig{figure=ps/summary-adopt,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-empty,width=7.5cm}}}
+\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=ps/summary-none,width=7.5cm}}}
+\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=ps/summary-dummy,width=7.5cm}}}
+}
+@end iflatex
+@end iftex
-Limiting commands work on subsets of the articles already fetched from
-the servers. These commands don't query the server for additional
-articles.
+@cindex adopting articles
-@table @kbd
+@table @code
-@item / /
-@itemx / s
-@kindex / / (Summary)
-@findex gnus-summary-limit-to-subject
-Limit the summary buffer to articles that match some subject
-(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
-matching articles.
+@item adopt
+Gnus will make the first of the orphaned articles the parent. This
+parent will adopt all the other articles. The adopted articles will be
+marked as such by pointy brackets (@samp{<>}) instead of the standard
+square brackets (@samp{[]}). This is the default method.
-@item / a
-@kindex / a (Summary)
-@findex gnus-summary-limit-to-author
-Limit the summary buffer to articles that match some author
-(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
-matching articles.
+@item dummy
+@vindex gnus-summary-dummy-line-format
+@vindex gnus-summary-make-false-root-always
+Gnus will create a dummy summary line that will pretend to be the
+parent. This dummy line does not correspond to any real article, so
+selecting it will just select the first real article after the dummy
+article. @code{gnus-summary-dummy-line-format} is used to specify the
+format of the dummy roots. It accepts only one format spec: @samp{S},
+which is the subject of the article. @xref{Formatting Variables}.
+If you want all threads to have a dummy root, even the non-gathered
+ones, set @code{gnus-summary-make-false-root-always} to @code{t}.
-@item / R
-@kindex / R (Summary)
-@findex gnus-summary-limit-to-recipient
-Limit the summary buffer to articles that match some recipient
-(@code{gnus-summary-limit-to-recipient}). If given a prefix, exclude
-matching articles.
+@item empty
+Gnus won't actually make any article the parent, but simply leave the
+subject field of all orphans except the first empty. (Actually, it will
+use @code{gnus-summary-same-subject} as the subject (@pxref{Summary
+Buffer Format}).)
-@item / A
-@kindex / A (Summary)
-@findex gnus-summary-limit-to-address
-Limit the summary buffer to articles in which contents of From, To or Cc
-header match a given address (@code{gnus-summary-limit-to-address}). If
-given a prefix, exclude matching articles.
+@item none
+Don't make any article parent at all. Just gather the threads and
+display them after one another.
-@item / S
-@kindex / S (Summary)
-@findex gnus-summary-limit-to-singletons
-Limit the summary buffer to articles that aren't part of any displayed
-threads (@code{gnus-summary-limit-to-singletons}). If given a prefix,
-limit to articles that are part of displayed threads.
+@item nil
+Don't gather loose threads.
+@end table
-@item / x
-@kindex / x (Summary)
-@findex gnus-summary-limit-to-extra
-Limit the summary buffer to articles that match one of the ``extra''
-headers (@pxref{To From Newsgroups})
-(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
-matching articles.
+@item gnus-summary-gather-subject-limit
+@vindex gnus-summary-gather-subject-limit
+Loose threads are gathered by comparing subjects of articles. If this
+variable is @code{nil}, Gnus requires an exact match between the
+subjects of the loose threads before gathering them into one big
+super-thread. This might be too strict a requirement, what with the
+presence of stupid newsreaders that chop off long subject lines. If
+you think so, set this variable to, say, 20 to require that only the
+first 20 characters of the subjects have to match. If you set this
+variable to a really low number, you'll find that Gnus will gather
+everything in sight into one thread, which isn't very helpful.
-@item / u
-@itemx x
-@kindex / u (Summary)
-@kindex x (Summary)
-@findex gnus-summary-limit-to-unread
-Limit the summary buffer to articles not marked as read
-(@code{gnus-summary-limit-to-unread}). If given a prefix, limit the
-buffer to articles strictly unread. This means that ticked and
-dormant articles will also be excluded.
+@cindex fuzzy article gathering
+If you set this variable to the special value @code{fuzzy}, Gnus will
+use a fuzzy string comparison algorithm on the subjects (@pxref{Fuzzy
+Matching}).
-@item / m
-@kindex / m (Summary)
-@findex gnus-summary-limit-to-marks
-Ask for a mark and then limit to all articles that have been marked
-with that mark (@code{gnus-summary-limit-to-marks}).
+@item gnus-simplify-subject-fuzzy-regexp
+@vindex gnus-simplify-subject-fuzzy-regexp
+This can either be a regular expression or list of regular expressions
+that match strings that will be removed from subjects if fuzzy subject
+simplification is used.
-@item / t
-@kindex / t (Summary)
-@findex gnus-summary-limit-to-age
-Ask for a number and then limit the summary buffer to articles older than (or equal to) that number of days
-(@code{gnus-summary-limit-to-age}). If given a prefix, limit to
-articles younger than that number of days.
+@item gnus-simplify-ignored-prefixes
+@vindex gnus-simplify-ignored-prefixes
+If you set @code{gnus-summary-gather-subject-limit} to something as low
+as 10, you might consider setting this variable to something sensible:
-@item / n
-@kindex / n (Summary)
-@findex gnus-summary-limit-to-articles
-With prefix @samp{n}, limit the summary buffer to the next @samp{n}
-articles. If not given a prefix, use the process marked articles
-instead. (@code{gnus-summary-limit-to-articles}).
+@c Written by Michael Ernst <mernst@cs.rice.edu>
+@lisp
+(setq gnus-simplify-ignored-prefixes
+ (concat
+ "\\`\\[?\\("
+ (mapconcat
+ 'identity
+ '("looking"
+ "wanted" "followup" "summary\\( of\\)?"
+ "help" "query" "problem" "question"
+ "answer" "reference" "announce"
+ "How can I" "How to" "Comparison of"
+ ;; ...
+ )
+ "\\|")
+ "\\)\\s *\\("
+ (mapconcat 'identity
+ '("for" "for reference" "with" "about")
+ "\\|")
+ "\\)?\\]?:?[ \t]*"))
+@end lisp
-@item / w
-@kindex / w (Summary)
-@findex gnus-summary-pop-limit
-Pop the previous limit off the stack and restore it
-(@code{gnus-summary-pop-limit}). If given a prefix, pop all limits off
-the stack.
+All words that match this regexp will be removed before comparing two
+subjects.
-@item / .
-@kindex / . (Summary)
-@findex gnus-summary-limit-to-unseen
-Limit the summary buffer to the unseen articles
-(@code{gnus-summary-limit-to-unseen}).
+@item gnus-simplify-subject-functions
+@vindex gnus-simplify-subject-functions
+If non-@code{nil}, this variable overrides
+@code{gnus-summary-gather-subject-limit}. This variable should be a
+list of functions to apply to the @code{Subject} string iteratively to
+arrive at the simplified version of the string.
-@item / v
-@kindex / v (Summary)
-@findex gnus-summary-limit-to-score
-Limit the summary buffer to articles that have a score at or above some
-score (@code{gnus-summary-limit-to-score}).
+Useful functions to put in this list include:
-@item / p
-@kindex / p (Summary)
-@findex gnus-summary-limit-to-display-predicate
-Limit the summary buffer to articles that satisfy the @code{display}
-group parameter predicate
-(@code{gnus-summary-limit-to-display-predicate}). @xref{Group
-Parameters}, for more on this predicate.
+@table @code
+@item gnus-simplify-subject-re
+@findex gnus-simplify-subject-re
+Strip the leading @samp{Re:}.
-@item / r
-@kindex / r (Summary)
-@findex gnus-summary-limit-to-replied
-Limit the summary buffer to replied articles
-(@code{gnus-summary-limit-to-replied}). If given a prefix, exclude
-replied articles.
+@item gnus-simplify-subject-fuzzy
+@findex gnus-simplify-subject-fuzzy
+Simplify fuzzily.
-@item / E
-@itemx M S
-@kindex M S (Summary)
-@kindex / E (Summary)
-@findex gnus-summary-limit-include-expunged
-Include all expunged articles in the limit
-(@code{gnus-summary-limit-include-expunged}).
+@item gnus-simplify-whitespace
+@findex gnus-simplify-whitespace
+Remove excessive whitespace.
-@item / D
-@kindex / D (Summary)
-@findex gnus-summary-limit-include-dormant
-Include all dormant articles in the limit
-(@code{gnus-summary-limit-include-dormant}).
+@item gnus-simplify-all-whitespace
+@findex gnus-simplify-all-whitespace
+Remove all whitespace.
+@end table
-@item / *
-@kindex / * (Summary)
-@findex gnus-summary-limit-include-cached
-Include all cached articles in the limit
-(@code{gnus-summary-limit-include-cached}).
+You may also write your own functions, of course.
-@item / d
-@kindex / d (Summary)
-@findex gnus-summary-limit-exclude-dormant
-Exclude all dormant articles from the limit
-(@code{gnus-summary-limit-exclude-dormant}).
-@item / M
-@kindex / M (Summary)
-@findex gnus-summary-limit-exclude-marks
-Exclude all marked articles (@code{gnus-summary-limit-exclude-marks}).
+@item gnus-summary-gather-exclude-subject
+@vindex gnus-summary-gather-exclude-subject
+Since loose thread gathering is done on subjects only, that might lead
+to many false hits, especially with certain common subjects like
+@samp{} and @samp{(none)}. To make the situation slightly better,
+you can use the regexp @code{gnus-summary-gather-exclude-subject} to say
+what subjects should be excluded from the gathering process.@*
+The default is @samp{^ *$\\|^(none)$}.
-@item / T
-@kindex / T (Summary)
-@findex gnus-summary-limit-include-thread
-Include all the articles in the current thread in the limit.
+@item gnus-summary-thread-gathering-function
+@vindex gnus-summary-thread-gathering-function
+Gnus gathers threads by looking at @code{Subject} headers. This means
+that totally unrelated articles may end up in the same ``thread'', which
+is confusing. An alternate approach is to look at all the
+@code{Message-ID}s in all the @code{References} headers to find matches.
+This will ensure that no gathered threads ever include unrelated
+articles, but it also means that people who have posted with broken
+newsreaders won't be gathered properly. The choice is yours---plague or
+cholera:
-@item / c
-@kindex / c (Summary)
-@findex gnus-summary-limit-exclude-childless-dormant
-Exclude all dormant articles that have no children from the limit@*
-(@code{gnus-summary-limit-exclude-childless-dormant}).
+@table @code
+@item gnus-gather-threads-by-subject
+@findex gnus-gather-threads-by-subject
+This function is the default gathering function and looks at
+@code{Subject}s exclusively.
-@item / C
-@kindex / C (Summary)
-@findex gnus-summary-limit-mark-excluded-as-read
-Mark all excluded unread articles as read
-(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
-also mark excluded ticked and dormant articles as read.
+@item gnus-gather-threads-by-references
+@findex gnus-gather-threads-by-references
+This function looks at @code{References} headers exclusively.
+@end table
-@item / b
-@kindex / b (Summary)
-@findex gnus-summary-limit-to-bodies
-Limit the summary buffer to articles that have bodies that match a
-certain regexp (@code{gnus-summary-limit-to-bodies}). If given a
-prefix, reverse the limit. This command is quite slow since it
-requires selecting each article to find the matches.
+If you want to test gathering by @code{References}, you could say
+something like:
-@item / h
-@kindex / h (Summary)
-@findex gnus-summary-limit-to-headers
-Like the previous command, only limit to headers instead
-(@code{gnus-summary-limit-to-headers}).
+@lisp
+(setq gnus-summary-thread-gathering-function
+ 'gnus-gather-threads-by-references)
+@end lisp
@end table
-The following commands aren't limiting commands, but use the @kbd{/}
-prefix as well.
+@node Filling In Threads
+@subsubsection Filling In Threads
-@table @kbd
-@item / N
-@kindex / N (Summary)
-@findex gnus-summary-insert-new-articles
-Insert all new articles in the summary buffer. It scans for new emails
-if @var{back-end}@code{-get-new-mail} is non-@code{nil}.
+@table @code
+@item gnus-fetch-old-headers
+@vindex gnus-fetch-old-headers
+If non-@code{nil}, Gnus will attempt to build old threads by fetching
+more old headers---headers to articles marked as read. If you would
+like to display as few summary lines as possible, but still connect as
+many loose threads as possible, you should set this variable to
+@code{some} or a number. If you set it to a number, no more than that
+number of extra old headers will be fetched. In either case, fetching
+old headers only works if the back end you are using carries overview
+files---this would normally be @code{nntp}, @code{nnspool},
+@code{nnml}, and @code{nnmaildir}. Also remember that if the root of
+the thread has been expired by the server, there's not much Gnus can
+do about that.
-@item / o
-@kindex / o (Summary)
-@findex gnus-summary-insert-old-articles
-Insert all old articles in the summary buffer. If given a numbered
-prefix, fetch this number of articles.
+This variable can also be set to @code{invisible}. This won't have any
+visible effects, but is useful if you use the @kbd{A T} command a lot
+(@pxref{Finding the Parent}).
-@end table
+The server has to support @acronym{NOV} for any of this to work.
+@cindex Gmane, gnus-fetch-old-headers
+This feature can seriously impact performance it ignores all locally
+cached header entries. Setting it to @code{t} for groups for a server
+that doesn't expire articles (such as news.gmane.org), leads to very
+slow summary generation.
-@node Threading
-@section Threading
-@cindex threading
-@cindex article threading
+@item gnus-fetch-old-ephemeral-headers
+@vindex gnus-fetch-old-ephemeral-headers
+Same as @code{gnus-fetch-old-headers}, but only used for ephemeral
+newsgroups.
-Gnus threads articles by default. @dfn{To thread} is to put responses
-to articles directly after the articles they respond to---in a
-hierarchical fashion.
+@item gnus-build-sparse-threads
+@vindex gnus-build-sparse-threads
+Fetching old headers can be slow. A low-rent similar effect can be
+gotten by setting this variable to @code{some}. Gnus will then look at
+the complete @code{References} headers of all articles and try to string
+together articles that belong in the same thread. This will leave
+@dfn{gaps} in the threading display where Gnus guesses that an article
+is missing from the thread. (These gaps appear like normal summary
+lines. If you select a gap, Gnus will try to fetch the article in
+question.) If this variable is @code{t}, Gnus will display all these
+``gaps'' without regard for whether they are useful for completing the
+thread or not. Finally, if this variable is @code{more}, Gnus won't cut
+off sparse leaf nodes that don't lead anywhere. This variable is
+@code{nil} by default.
-Threading is done by looking at the @code{References} headers of the
-articles. In a perfect world, this would be enough to build pretty
-trees, but unfortunately, the @code{References} header is often broken
-or simply missing. Weird news propagation exacerbates the problem,
-so one has to employ other heuristics to get pleasing results. A
-plethora of approaches exists, as detailed in horrible detail in
-@ref{Customizing Threading}.
+@item gnus-read-all-available-headers
+@vindex gnus-read-all-available-headers
+This is a rather obscure variable that few will find useful. It's
+intended for those non-news newsgroups where the back end has to fetch
+quite a lot to present the summary buffer, and where it's impossible to
+go back to parents of articles. This is mostly the case in the
+web-based groups.
-First, a quick overview of the concepts:
+If you don't use those, then it's safe to leave this as the default
+@code{nil}. If you want to use this variable, it should be a regexp
+that matches the group name, or @code{t} for all groups.
-@table @dfn
-@item root
-The top-most article in a thread; the first article in the thread.
+@end table
-@item thread
-A tree-like article structure.
-@item sub-thread
-A small(er) section of this tree-like structure.
+@node More Threading
+@subsubsection More Threading
-@item loose threads
-Threads often lose their roots due to article expiry, or due to the root
-already having been read in a previous session, and not displayed in the
-summary buffer. We then typically have many sub-threads that really
-belong to one thread, but are without connecting roots. These are
-called loose threads.
+@table @code
+@item gnus-show-threads
+@vindex gnus-show-threads
+If this variable is @code{nil}, no threading will be done, and all of
+the rest of the variables here will have no effect. Turning threading
+off will speed group selection up a bit, but it is sure to make reading
+slower and more awkward.
-@item thread gathering
-An attempt to gather loose threads into bigger threads.
+@item gnus-thread-hide-subtree
+@vindex gnus-thread-hide-subtree
+If non-@code{nil}, all threads will be hidden when the summary buffer is
+generated.
-@item sparse threads
-A thread where the missing articles have been ``guessed'' at, and are
-displayed as empty lines in the summary buffer.
+This can also be a predicate specifier (@pxref{Predicate Specifiers}).
+Available predicates are @code{gnus-article-unread-p} and
+@code{gnus-article-unseen-p}.
-@end table
+Here's an example:
+@lisp
+(setq gnus-thread-hide-subtree
+ '(or gnus-article-unread-p
+ gnus-article-unseen-p))
+@end lisp
-@menu
-* Customizing Threading:: Variables you can change to affect the threading.
-* Thread Commands:: Thread based commands in the summary buffer.
-@end menu
+(It's a pretty nonsensical example, since all unseen articles are also
+unread, but you get my drift.)
-@node Customizing Threading
-@subsection Customizing Threading
-@cindex customizing threading
+@item gnus-thread-expunge-below
+@vindex gnus-thread-expunge-below
+All threads that have a total score (as defined by
+@code{gnus-thread-score-function}) less than this number will be
+expunged. This variable is @code{nil} by default, which means that no
+threads are expunged.
-@menu
-* Loose Threads:: How Gnus gathers loose threads into bigger threads.
-* Filling In Threads:: Making the threads displayed look fuller.
-* More Threading:: Even more variables for fiddling with threads.
-* Low-Level Threading:: You thought it was over@dots{} but you were wrong!
-@end menu
+@item gnus-thread-hide-killed
+@vindex gnus-thread-hide-killed
+if you kill a thread and this variable is non-@code{nil}, the subtree
+will be hidden.
+@item gnus-thread-ignore-subject
+@vindex gnus-thread-ignore-subject
+Sometimes somebody changes the subject in the middle of a thread. If
+this variable is non-@code{nil}, which is the default, the subject
+change is ignored. If it is @code{nil}, a change in the subject will
+result in a new thread.
-@node Loose Threads
-@subsubsection Loose Threads
-@cindex <
-@cindex >
-@cindex loose threads
+@item gnus-thread-indent-level
+@vindex gnus-thread-indent-level
+This is a number that says how much each sub-thread should be indented.
+The default is 4.
-@table @code
-@item gnus-summary-make-false-root
-@vindex gnus-summary-make-false-root
-If non-@code{nil}, Gnus will gather all loose subtrees into one big tree
-and create a dummy root at the top. (Wait a minute. Root at the top?
-Yup.) Loose subtrees occur when the real root has expired, or you've
-read or killed the root in a previous session.
+@item gnus-sort-gathered-threads-function
+@vindex gnus-sort-gathered-threads-function
+Sometimes, particularly with mailing lists, the order in which mails
+arrive locally is not necessarily the same as the order in which they
+arrived on the mailing list. Consequently, when sorting sub-threads
+using the default @code{gnus-thread-sort-by-number}, responses can end
+up appearing before the article to which they are responding to.
+Setting this variable to an alternate value
+(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
+appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
+more logical sub-thread ordering in such instances.
-When there is no real root of a thread, Gnus will have to fudge
-something. This variable says what fudging method Gnus should use.
-There are four possible values:
+@end table
-@iftex
-@iflatex
-\gnusfigure{The Summary Buffer}{390}{
-\put(0,0){\epsfig{figure=ps/summary-adopt,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-empty,width=7.5cm}}}
-\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=ps/summary-none,width=7.5cm}}}
-\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=ps/summary-dummy,width=7.5cm}}}
-}
-@end iflatex
-@end iftex
-@cindex adopting articles
+@node Low-Level Threading
+@subsubsection Low-Level Threading
@table @code
-@item adopt
-Gnus will make the first of the orphaned articles the parent. This
-parent will adopt all the other articles. The adopted articles will be
-marked as such by pointy brackets (@samp{<>}) instead of the standard
-square brackets (@samp{[]}). This is the default method.
+@item gnus-parse-headers-hook
+@vindex gnus-parse-headers-hook
+Hook run before parsing any headers.
-@item dummy
-@vindex gnus-summary-dummy-line-format
-@vindex gnus-summary-make-false-root-always
-Gnus will create a dummy summary line that will pretend to be the
-parent. This dummy line does not correspond to any real article, so
-selecting it will just select the first real article after the dummy
-article. @code{gnus-summary-dummy-line-format} is used to specify the
-format of the dummy roots. It accepts only one format spec: @samp{S},
-which is the subject of the article. @xref{Formatting Variables}.
-If you want all threads to have a dummy root, even the non-gathered
-ones, set @code{gnus-summary-make-false-root-always} to @code{t}.
+@item gnus-alter-header-function
+@vindex gnus-alter-header-function
+If non-@code{nil}, this function will be called to allow alteration of
+article header structures. The function is called with one parameter,
+the article header vector, which it may alter in any way. For instance,
+if you have a mail-to-news gateway which alters the @code{Message-ID}s
+in systematic ways (by adding prefixes and such), you can use this
+variable to un-scramble the @code{Message-ID}s so that they are more
+meaningful. Here's one example:
-@item empty
-Gnus won't actually make any article the parent, but simply leave the
-subject field of all orphans except the first empty. (Actually, it will
-use @code{gnus-summary-same-subject} as the subject (@pxref{Summary
-Buffer Format}).)
+@lisp
+(setq gnus-alter-header-function 'my-alter-message-id)
-@item none
-Don't make any article parent at all. Just gather the threads and
-display them after one another.
+(defun my-alter-message-id (header)
+ (let ((id (mail-header-id header)))
+ (when (string-match
+ "\\(<[^<>@@]*\\)\\.?cygnus\\..*@@\\([^<>@@]*>\\)" id)
+ (mail-header-set-id
+ (concat (match-string 1 id) "@@" (match-string 2 id))
+ header))))
+@end lisp
-@item nil
-Don't gather loose threads.
@end table
-@item gnus-summary-gather-subject-limit
-@vindex gnus-summary-gather-subject-limit
-Loose threads are gathered by comparing subjects of articles. If this
-variable is @code{nil}, Gnus requires an exact match between the
-subjects of the loose threads before gathering them into one big
-super-thread. This might be too strict a requirement, what with the
-presence of stupid newsreaders that chop off long subject lines. If
-you think so, set this variable to, say, 20 to require that only the
-first 20 characters of the subjects have to match. If you set this
-variable to a really low number, you'll find that Gnus will gather
-everything in sight into one thread, which isn't very helpful.
-
-@cindex fuzzy article gathering
-If you set this variable to the special value @code{fuzzy}, Gnus will
-use a fuzzy string comparison algorithm on the subjects (@pxref{Fuzzy
-Matching}).
-@item gnus-simplify-subject-fuzzy-regexp
-@vindex gnus-simplify-subject-fuzzy-regexp
-This can either be a regular expression or list of regular expressions
-that match strings that will be removed from subjects if fuzzy subject
-simplification is used.
+@node Thread Commands
+@subsection Thread Commands
+@cindex thread commands
-@item gnus-simplify-ignored-prefixes
-@vindex gnus-simplify-ignored-prefixes
-If you set @code{gnus-summary-gather-subject-limit} to something as low
-as 10, you might consider setting this variable to something sensible:
+@table @kbd
-@c Written by Michael Ernst <mernst@cs.rice.edu>
-@lisp
-(setq gnus-simplify-ignored-prefixes
- (concat
- "\\`\\[?\\("
- (mapconcat
- 'identity
- '("looking"
- "wanted" "followup" "summary\\( of\\)?"
- "help" "query" "problem" "question"
- "answer" "reference" "announce"
- "How can I" "How to" "Comparison of"
- ;; ...
- )
- "\\|")
- "\\)\\s *\\("
- (mapconcat 'identity
- '("for" "for reference" "with" "about")
- "\\|")
- "\\)?\\]?:?[ \t]*"))
-@end lisp
+@item T k
+@itemx C-M-k
+@kindex T k (Summary)
+@kindex C-M-k (Summary)
+@findex gnus-summary-kill-thread
+Mark all articles in the current (sub-)thread as read
+(@code{gnus-summary-kill-thread}). If the prefix argument is positive,
+remove all marks instead. If the prefix argument is negative, tick
+articles instead.
-All words that match this regexp will be removed before comparing two
-subjects.
+@item T l
+@itemx C-M-l
+@kindex T l (Summary)
+@kindex C-M-l (Summary)
+@findex gnus-summary-lower-thread
+Lower the score of the current (sub-)thread
+(@code{gnus-summary-lower-thread}).
-@item gnus-simplify-subject-functions
-@vindex gnus-simplify-subject-functions
-If non-@code{nil}, this variable overrides
-@code{gnus-summary-gather-subject-limit}. This variable should be a
-list of functions to apply to the @code{Subject} string iteratively to
-arrive at the simplified version of the string.
+@item T i
+@kindex T i (Summary)
+@findex gnus-summary-raise-thread
+Increase the score of the current (sub-)thread
+(@code{gnus-summary-raise-thread}).
-Useful functions to put in this list include:
+@item T #
+@kindex T # (Summary)
+@findex gnus-uu-mark-thread
+Set the process mark on the current (sub-)thread
+(@code{gnus-uu-mark-thread}).
-@table @code
-@item gnus-simplify-subject-re
-@findex gnus-simplify-subject-re
-Strip the leading @samp{Re:}.
+@item T M-#
+@kindex T M-# (Summary)
+@findex gnus-uu-unmark-thread
+Remove the process mark from the current (sub-)thread
+(@code{gnus-uu-unmark-thread}).
-@item gnus-simplify-subject-fuzzy
-@findex gnus-simplify-subject-fuzzy
-Simplify fuzzily.
+@item T T
+@kindex T T (Summary)
+@findex gnus-summary-toggle-threads
+Toggle threading (@code{gnus-summary-toggle-threads}).
-@item gnus-simplify-whitespace
-@findex gnus-simplify-whitespace
-Remove excessive whitespace.
+@item T s
+@kindex T s (Summary)
+@findex gnus-summary-show-thread
+Expose the (sub-)thread hidden under the current article, if any@*
+(@code{gnus-summary-show-thread}).
-@item gnus-simplify-all-whitespace
-@findex gnus-simplify-all-whitespace
-Remove all whitespace.
-@end table
+@item T h
+@kindex T h (Summary)
+@findex gnus-summary-hide-thread
+Hide the current (sub-)thread (@code{gnus-summary-hide-thread}).
-You may also write your own functions, of course.
+@item T S
+@kindex T S (Summary)
+@findex gnus-summary-show-all-threads
+Expose all hidden threads (@code{gnus-summary-show-all-threads}).
+@item T H
+@kindex T H (Summary)
+@findex gnus-summary-hide-all-threads
+Hide all threads (@code{gnus-summary-hide-all-threads}).
-@item gnus-summary-gather-exclude-subject
-@vindex gnus-summary-gather-exclude-subject
-Since loose thread gathering is done on subjects only, that might lead
-to many false hits, especially with certain common subjects like
-@samp{} and @samp{(none)}. To make the situation slightly better,
-you can use the regexp @code{gnus-summary-gather-exclude-subject} to say
-what subjects should be excluded from the gathering process.@*
-The default is @samp{^ *$\\|^(none)$}.
+@item T t
+@kindex T t (Summary)
+@findex gnus-summary-rethread-current
+Re-thread the current article's thread
+(@code{gnus-summary-rethread-current}). This works even when the
+summary buffer is otherwise unthreaded.
-@item gnus-summary-thread-gathering-function
-@vindex gnus-summary-thread-gathering-function
-Gnus gathers threads by looking at @code{Subject} headers. This means
-that totally unrelated articles may end up in the same ``thread'', which
-is confusing. An alternate approach is to look at all the
-@code{Message-ID}s in all the @code{References} headers to find matches.
-This will ensure that no gathered threads ever include unrelated
-articles, but it also means that people who have posted with broken
-newsreaders won't be gathered properly. The choice is yours---plague or
-cholera:
+@item T ^
+@kindex T ^ (Summary)
+@findex gnus-summary-reparent-thread
+Make the current article the child of the marked (or previous) article
+(@code{gnus-summary-reparent-thread}).
-@table @code
-@item gnus-gather-threads-by-subject
-@findex gnus-gather-threads-by-subject
-This function is the default gathering function and looks at
-@code{Subject}s exclusively.
+@item T M-^
+@kindex T M-^ (Summary)
+@findex gnus-summary-reparent-children
+Make the current article the parent of the marked articles
+(@code{gnus-summary-reparent-children}).
-@item gnus-gather-threads-by-references
-@findex gnus-gather-threads-by-references
-This function looks at @code{References} headers exclusively.
@end table
-If you want to test gathering by @code{References}, you could say
-something like:
+The following commands are thread movement commands. They all
+understand the numeric prefix.
-@lisp
-(setq gnus-summary-thread-gathering-function
- 'gnus-gather-threads-by-references)
-@end lisp
+@table @kbd
-@end table
+@item T n
+@kindex T n (Summary)
+@itemx C-M-f
+@kindex C-M-n (Summary)
+@itemx M-down
+@kindex M-down (Summary)
+@findex gnus-summary-next-thread
+Go to the next thread (@code{gnus-summary-next-thread}).
+@item T p
+@kindex T p (Summary)
+@itemx C-M-b
+@kindex C-M-p (Summary)
+@itemx M-up
+@kindex M-up (Summary)
+@findex gnus-summary-prev-thread
+Go to the previous thread (@code{gnus-summary-prev-thread}).
-@node Filling In Threads
-@subsubsection Filling In Threads
+@item T d
+@kindex T d (Summary)
+@findex gnus-summary-down-thread
+Descend the thread (@code{gnus-summary-down-thread}).
-@table @code
-@item gnus-fetch-old-headers
-@vindex gnus-fetch-old-headers
-If non-@code{nil}, Gnus will attempt to build old threads by fetching
-more old headers---headers to articles marked as read. If you would
-like to display as few summary lines as possible, but still connect as
-many loose threads as possible, you should set this variable to
-@code{some} or a number. If you set it to a number, no more than that
-number of extra old headers will be fetched. In either case, fetching
-old headers only works if the back end you are using carries overview
-files---this would normally be @code{nntp}, @code{nnspool},
-@code{nnml}, and @code{nnmaildir}. Also remember that if the root of
-the thread has been expired by the server, there's not much Gnus can
-do about that.
+@item T u
+@kindex T u (Summary)
+@findex gnus-summary-up-thread
+Ascend the thread (@code{gnus-summary-up-thread}).
+
+@item T o
+@kindex T o (Summary)
+@findex gnus-summary-top-thread
+Go to the top of the thread (@code{gnus-summary-top-thread}).
+@end table
+
+@vindex gnus-thread-operation-ignore-subject
+If you ignore subject while threading, you'll naturally end up with
+threads that have several different subjects in them. If you then issue
+a command like @kbd{T k} (@code{gnus-summary-kill-thread}) you might not
+wish to kill the entire thread, but just those parts of the thread that
+have the same subject as the current article. If you like this idea,
+you can fiddle with @code{gnus-thread-operation-ignore-subject}. If it
+is non-@code{nil} (which it is by default), subjects will be ignored
+when doing thread commands. If this variable is @code{nil}, articles in
+the same thread with different subjects will not be included in the
+operation in question. If this variable is @code{fuzzy}, only articles
+that have subjects fuzzily equal will be included (@pxref{Fuzzy
+Matching}).
-This variable can also be set to @code{invisible}. This won't have any
-visible effects, but is useful if you use the @kbd{A T} command a lot
-(@pxref{Finding the Parent}).
-The server has to support @acronym{NOV} for any of this to work.
+@node Sorting the Summary Buffer
+@section Sorting the Summary Buffer
-@cindex Gmane, gnus-fetch-old-headers
-This feature can seriously impact performance it ignores all locally
-cached header entries. Setting it to @code{t} for groups for a server
-that doesn't expire articles (such as news.gmane.org), leads to very
-slow summary generation.
+@findex gnus-thread-sort-by-total-score
+@findex gnus-thread-sort-by-date
+@findex gnus-thread-sort-by-score
+@findex gnus-thread-sort-by-subject
+@findex gnus-thread-sort-by-author
+@findex gnus-thread-sort-by-recipient
+@findex gnus-thread-sort-by-number
+@findex gnus-thread-sort-by-random
+@vindex gnus-thread-sort-functions
+@findex gnus-thread-sort-by-most-recent-number
+@findex gnus-thread-sort-by-most-recent-date
+If you are using a threaded summary display, you can sort the threads by
+setting @code{gnus-thread-sort-functions}, which can be either a single
+function, a list of functions, or a list containing functions and
+@code{(not some-function)} elements.
-@item gnus-fetch-old-ephemeral-headers
-@vindex gnus-fetch-old-ephemeral-headers
-Same as @code{gnus-fetch-old-headers}, but only used for ephemeral
-newsgroups.
+By default, sorting is done on article numbers. Ready-made sorting
+predicate functions include @code{gnus-thread-sort-by-number},
+@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-recipient},
+@code{gnus-thread-sort-by-subject},
+@code{gnus-thread-sort-by-date},
+@code{gnus-thread-sort-by-score},
+@code{gnus-thread-sort-by-most-recent-number},
+@code{gnus-thread-sort-by-most-recent-date},
+@code{gnus-thread-sort-by-random} and
+@code{gnus-thread-sort-by-total-score}.
-@item gnus-build-sparse-threads
-@vindex gnus-build-sparse-threads
-Fetching old headers can be slow. A low-rent similar effect can be
-gotten by setting this variable to @code{some}. Gnus will then look at
-the complete @code{References} headers of all articles and try to string
-together articles that belong in the same thread. This will leave
-@dfn{gaps} in the threading display where Gnus guesses that an article
-is missing from the thread. (These gaps appear like normal summary
-lines. If you select a gap, Gnus will try to fetch the article in
-question.) If this variable is @code{t}, Gnus will display all these
-``gaps'' without regard for whether they are useful for completing the
-thread or not. Finally, if this variable is @code{more}, Gnus won't cut
-off sparse leaf nodes that don't lead anywhere. This variable is
-@code{nil} by default.
+Each function takes two threads and returns non-@code{nil} if the first
+thread should be sorted before the other. Note that sorting really is
+normally done by looking only at the roots of each thread.
-@item gnus-read-all-available-headers
-@vindex gnus-read-all-available-headers
-This is a rather obscure variable that few will find useful. It's
-intended for those non-news newsgroups where the back end has to fetch
-quite a lot to present the summary buffer, and where it's impossible to
-go back to parents of articles. This is mostly the case in the
-web-based groups.
+If you use more than one function, the primary sort key should be the
+last function in the list. You should probably always include
+@code{gnus-thread-sort-by-number} in the list of sorting
+functions---preferably first. This will ensure that threads that are
+equal with respect to the other sort criteria will be displayed in
+ascending article order.
-If you don't use those, then it's safe to leave this as the default
-@code{nil}. If you want to use this variable, it should be a regexp
-that matches the group name, or @code{t} for all groups.
+If you would like to sort by reverse score, then by subject, and finally
+by number, you could do something like:
-@end table
+@lisp
+(setq gnus-thread-sort-functions
+ '(gnus-thread-sort-by-number
+ gnus-thread-sort-by-subject
+ (not gnus-thread-sort-by-total-score)))
+@end lisp
+The threads that have highest score will be displayed first in the
+summary buffer. When threads have the same score, they will be sorted
+alphabetically. The threads that have the same score and the same
+subject will be sorted by number, which is (normally) the sequence in
+which the articles arrived.
-@node More Threading
-@subsubsection More Threading
+If you want to sort by score and then reverse arrival order, you could
+say something like:
-@table @code
-@item gnus-show-threads
-@vindex gnus-show-threads
-If this variable is @code{nil}, no threading will be done, and all of
-the rest of the variables here will have no effect. Turning threading
-off will speed group selection up a bit, but it is sure to make reading
-slower and more awkward.
+@lisp
+(setq gnus-thread-sort-functions
+ '((not gnus-thread-sort-by-number)
+ gnus-thread-sort-by-score))
+@end lisp
-@item gnus-thread-hide-subtree
-@vindex gnus-thread-hide-subtree
-If non-@code{nil}, all threads will be hidden when the summary buffer is
-generated.
+@vindex gnus-thread-score-function
+The function in the @code{gnus-thread-score-function} variable (default
+@code{+}) is used for calculating the total score of a thread. Useful
+functions might be @code{max}, @code{min}, or squared means, or whatever
+tickles your fancy.
-This can also be a predicate specifier (@pxref{Predicate Specifiers}).
-Available predicates are @code{gnus-article-unread-p} and
-@code{gnus-article-unseen-p}.
+@findex gnus-article-sort-functions
+@findex gnus-article-sort-by-date
+@findex gnus-article-sort-by-most-recent-date
+@findex gnus-article-sort-by-score
+@findex gnus-article-sort-by-subject
+@findex gnus-article-sort-by-author
+@findex gnus-article-sort-by-random
+@findex gnus-article-sort-by-number
+@findex gnus-article-sort-by-most-recent-number
+If you are using an unthreaded display for some strange reason or
+other, you have to fiddle with the @code{gnus-article-sort-functions}
+variable. It is very similar to the
+@code{gnus-thread-sort-functions}, except that it uses slightly
+different functions for article comparison. Available sorting
+predicate functions are @code{gnus-article-sort-by-number},
+@code{gnus-article-sort-by-author},
+@code{gnus-article-sort-by-subject}, @code{gnus-article-sort-by-date},
+@code{gnus-article-sort-by-random}, and
+@code{gnus-article-sort-by-score}.
-Here's an example:
+If you want to sort an unthreaded summary display by subject, you could
+say something like:
@lisp
-(setq gnus-thread-hide-subtree
- '(or gnus-article-unread-p
- gnus-article-unseen-p))
+(setq gnus-article-sort-functions
+ '(gnus-article-sort-by-number
+ gnus-article-sort-by-subject))
@end lisp
-(It's a pretty nonsensical example, since all unseen articles are also
-unread, but you get my drift.)
+You can define group specific sorting via @code{gnus-parameters},
+@xref{Group Parameters}.
-@item gnus-thread-expunge-below
-@vindex gnus-thread-expunge-below
-All threads that have a total score (as defined by
-@code{gnus-thread-score-function}) less than this number will be
-expunged. This variable is @code{nil} by default, which means that no
-threads are expunged.
+@node Asynchronous Fetching
+@section Asynchronous Article Fetching
+@cindex asynchronous article fetching
+@cindex article pre-fetch
+@cindex pre-fetch
-@item gnus-thread-hide-killed
-@vindex gnus-thread-hide-killed
-if you kill a thread and this variable is non-@code{nil}, the subtree
-will be hidden.
+If you read your news from an @acronym{NNTP} server that's far away, the
+network latencies may make reading articles a chore. You have to wait
+for a while after pressing @kbd{n} to go to the next article before the
+article appears. Why can't Gnus just go ahead and fetch the article
+while you are reading the previous one? Why not, indeed.
-@item gnus-thread-ignore-subject
-@vindex gnus-thread-ignore-subject
-Sometimes somebody changes the subject in the middle of a thread. If
-this variable is non-@code{nil}, which is the default, the subject
-change is ignored. If it is @code{nil}, a change in the subject will
-result in a new thread.
+First, some caveats. There are some pitfalls to using asynchronous
+article fetching, especially the way Gnus does it.
-@item gnus-thread-indent-level
-@vindex gnus-thread-indent-level
-This is a number that says how much each sub-thread should be indented.
-The default is 4.
+Let's say you are reading article 1, which is short, and article 2 is
+quite long, and you are not interested in reading that. Gnus does not
+know this, so it goes ahead and fetches article 2. You decide to read
+article 3, but since Gnus is in the process of fetching article 2, the
+connection is blocked.
-@item gnus-sort-gathered-threads-function
-@vindex gnus-sort-gathered-threads-function
-Sometimes, particularly with mailing lists, the order in which mails
-arrive locally is not necessarily the same as the order in which they
-arrived on the mailing list. Consequently, when sorting sub-threads
-using the default @code{gnus-thread-sort-by-number}, responses can end
-up appearing before the article to which they are responding to.
-Setting this variable to an alternate value
-(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
-appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
-more logical sub-thread ordering in such instances.
+To avoid these situations, Gnus will open two (count 'em two)
+connections to the server. Some people may think this isn't a very nice
+thing to do, but I don't see any real alternatives. Setting up that
+extra connection takes some time, so Gnus startup will be slower.
-@end table
+Gnus will fetch more articles than you will read. This will mean that
+the link between your machine and the @acronym{NNTP} server will become more
+loaded than if you didn't use article pre-fetch. The server itself will
+also become more loaded---both with the extra article requests, and the
+extra connection.
+Ok, so now you know that you shouldn't really use this thing@dots{} unless
+you really want to.
-@node Low-Level Threading
-@subsubsection Low-Level Threading
+@vindex gnus-asynchronous
+Here's how: Set @code{gnus-asynchronous} to @code{t}. The rest should
+happen automatically.
-@table @code
+@vindex gnus-use-article-prefetch
+You can control how many articles are to be pre-fetched by setting
+@code{gnus-use-article-prefetch}. This is 30 by default, which means
+that when you read an article in the group, the back end will pre-fetch
+the next 30 articles. If this variable is @code{t}, the back end will
+pre-fetch all the articles it can without bound. If it is
+@code{nil}, no pre-fetching will be done.
-@item gnus-parse-headers-hook
-@vindex gnus-parse-headers-hook
-Hook run before parsing any headers.
+@vindex gnus-async-prefetch-article-p
+@findex gnus-async-unread-p
+There are probably some articles that you don't want to pre-fetch---read
+articles, for instance. The @code{gnus-async-prefetch-article-p}
+variable controls whether an article is to be pre-fetched. This
+function should return non-@code{nil} when the article in question is
+to be pre-fetched. The default is @code{gnus-async-unread-p}, which
+returns @code{nil} on read articles. The function is called with an
+article data structure as the only parameter.
-@item gnus-alter-header-function
-@vindex gnus-alter-header-function
-If non-@code{nil}, this function will be called to allow alteration of
-article header structures. The function is called with one parameter,
-the article header vector, which it may alter in any way. For instance,
-if you have a mail-to-news gateway which alters the @code{Message-ID}s
-in systematic ways (by adding prefixes and such), you can use this
-variable to un-scramble the @code{Message-ID}s so that they are more
-meaningful. Here's one example:
+If, for instance, you wish to pre-fetch only unread articles shorter
+than 100 lines, you could say something like:
+
+@lisp
+(defun my-async-short-unread-p (data)
+ "Return non-nil for short, unread articles."
+ (and (gnus-data-unread-p data)
+ (< (mail-header-lines (gnus-data-header data))
+ 100)))
+
+(setq gnus-async-prefetch-article-p 'my-async-short-unread-p)
+@end lisp
+
+These functions will be called many, many times, so they should
+preferably be short and sweet to avoid slowing down Gnus too much.
+It's probably a good idea to byte-compile things like this.
-@lisp
-(setq gnus-alter-header-function 'my-alter-message-id)
+@vindex gnus-async-post-fetch-function
+@findex gnus-html-prefetch-images
+After an article has been prefetched, this
+@code{gnus-async-post-fetch-function} will be called. The buffer will
+be narrowed to the region of the article that was fetched. A useful
+value would be @code{gnus-html-prefetch-images}, which will prefetch
+and store images referenced in the article, so that you don't have to
+wait for them to be fetched when you read the article. This is useful
+for @acronym{HTML} messages that have external images.
-(defun my-alter-message-id (header)
- (let ((id (mail-header-id header)))
- (when (string-match
- "\\(<[^<>@@]*\\)\\.?cygnus\\..*@@\\([^<>@@]*>\\)" id)
- (mail-header-set-id
- (concat (match-string 1 id) "@@" (match-string 2 id))
- header))))
-@end lisp
+@vindex gnus-prefetched-article-deletion-strategy
+Articles have to be removed from the asynch buffer sooner or later. The
+@code{gnus-prefetched-article-deletion-strategy} says when to remove
+articles. This is a list that may contain the following elements:
+
+@table @code
+@item read
+Remove articles when they are read.
+@item exit
+Remove articles when exiting the group.
@end table
+The default value is @code{(read exit)}.
-@node Thread Commands
-@subsection Thread Commands
-@cindex thread commands
+@c @vindex gnus-use-header-prefetch
+@c If @code{gnus-use-header-prefetch} is non-@code{nil}, prefetch articles
+@c from the next group.
-@table @kbd
-@item T k
-@itemx C-M-k
-@kindex T k (Summary)
-@kindex C-M-k (Summary)
-@findex gnus-summary-kill-thread
-Mark all articles in the current (sub-)thread as read
-(@code{gnus-summary-kill-thread}). If the prefix argument is positive,
-remove all marks instead. If the prefix argument is negative, tick
-articles instead.
+@node Article Caching
+@section Article Caching
+@cindex article caching
+@cindex caching
-@item T l
-@itemx C-M-l
-@kindex T l (Summary)
-@kindex C-M-l (Summary)
-@findex gnus-summary-lower-thread
-Lower the score of the current (sub-)thread
-(@code{gnus-summary-lower-thread}).
+If you have an @emph{extremely} slow @acronym{NNTP} connection, you may
+consider turning article caching on. Each article will then be stored
+locally under your home directory. As you may surmise, this could
+potentially use @emph{huge} amounts of disk space, as well as eat up all
+your inodes so fast it will make your head swim. In vodka.
-@item T i
-@kindex T i (Summary)
-@findex gnus-summary-raise-thread
-Increase the score of the current (sub-)thread
-(@code{gnus-summary-raise-thread}).
+Used carefully, though, it could be just an easier way to save articles.
-@item T #
-@kindex T # (Summary)
-@findex gnus-uu-mark-thread
-Set the process mark on the current (sub-)thread
-(@code{gnus-uu-mark-thread}).
+@vindex gnus-use-long-file-name
+@vindex gnus-cache-directory
+@vindex gnus-use-cache
+To turn caching on, set @code{gnus-use-cache} to @code{t}. By default,
+all articles ticked or marked as dormant will then be copied
+over to your local cache (@code{gnus-cache-directory}). Whether this
+cache is flat or hierarchical is controlled by the
+@code{gnus-use-long-file-name} variable, as usual.
-@item T M-#
-@kindex T M-# (Summary)
-@findex gnus-uu-unmark-thread
-Remove the process mark from the current (sub-)thread
-(@code{gnus-uu-unmark-thread}).
+When re-selecting a ticked or dormant article, it will be fetched from the
+cache instead of from the server. As articles in your cache will never
+expire, this might serve as a method of saving articles while still
+keeping them where they belong. Just mark all articles you want to save
+as dormant, and don't worry.
-@item T T
-@kindex T T (Summary)
-@findex gnus-summary-toggle-threads
-Toggle threading (@code{gnus-summary-toggle-threads}).
+When an article is marked as read, is it removed from the cache.
-@item T s
-@kindex T s (Summary)
-@findex gnus-summary-show-thread
-Expose the (sub-)thread hidden under the current article, if any@*
-(@code{gnus-summary-show-thread}).
+@vindex gnus-cache-remove-articles
+@vindex gnus-cache-enter-articles
+The entering/removal of articles from the cache is controlled by the
+@code{gnus-cache-enter-articles} and @code{gnus-cache-remove-articles}
+variables. Both are lists of symbols. The first is @code{(ticked
+dormant)} by default, meaning that ticked and dormant articles will be
+put in the cache. The latter is @code{(read)} by default, meaning that
+articles marked as read are removed from the cache. Possibly
+symbols in these two lists are @code{ticked}, @code{dormant},
+@code{unread} and @code{read}.
-@item T h
-@kindex T h (Summary)
-@findex gnus-summary-hide-thread
-Hide the current (sub-)thread (@code{gnus-summary-hide-thread}).
+@findex gnus-jog-cache
+So where does the massive article-fetching and storing come into the
+picture? The @code{gnus-jog-cache} command will go through all
+subscribed newsgroups, request all unread articles, score them, and
+store them in the cache. You should only ever, ever ever ever, use this
+command if 1) your connection to the @acronym{NNTP} server is really, really,
+really slow and 2) you have a really, really, really huge disk.
+Seriously. One way to cut down on the number of articles downloaded is
+to score unwanted articles down and have them marked as read. They will
+not then be downloaded by this command.
-@item T S
-@kindex T S (Summary)
-@findex gnus-summary-show-all-threads
-Expose all hidden threads (@code{gnus-summary-show-all-threads}).
+@vindex gnus-uncacheable-groups
+@vindex gnus-cacheable-groups
+It is likely that you do not want caching on all groups. For instance,
+if your @code{nnml} mail is located under your home directory, it makes no
+sense to cache it somewhere else under your home directory. Unless you
+feel that it's neat to use twice as much space.
-@item T H
-@kindex T H (Summary)
-@findex gnus-summary-hide-all-threads
-Hide all threads (@code{gnus-summary-hide-all-threads}).
+To limit the caching, you could set @code{gnus-cacheable-groups} to a
+regexp of groups to cache, @samp{^nntp} for instance, or set the
+@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
+Both variables are @code{nil} by default. If a group matches both
+variables, the group is not cached.
-@item T t
-@kindex T t (Summary)
-@findex gnus-summary-rethread-current
-Re-thread the current article's thread
-(@code{gnus-summary-rethread-current}). This works even when the
-summary buffer is otherwise unthreaded.
+@findex gnus-cache-generate-nov-databases
+@findex gnus-cache-generate-active
+@vindex gnus-cache-active-file
+The cache stores information on what articles it contains in its active
+file (@code{gnus-cache-active-file}). If this file (or any other parts
+of the cache) becomes all messed up for some reason or other, Gnus
+offers two functions that will try to set things right. @kbd{M-x
+gnus-cache-generate-nov-databases} will (re)build all the @acronym{NOV}
+files, and @kbd{gnus-cache-generate-active} will (re)generate the active
+file.
-@item T ^
-@kindex T ^ (Summary)
-@findex gnus-summary-reparent-thread
-Make the current article the child of the marked (or previous) article
-(@code{gnus-summary-reparent-thread}).
+@findex gnus-cache-move-cache
+@code{gnus-cache-move-cache} will move your whole
+@code{gnus-cache-directory} to some other location. You get asked to
+where, isn't that cool?
-@item T M-^
-@kindex T M-^ (Summary)
-@findex gnus-summary-reparent-children
-Make the current article the parent of the marked articles
-(@code{gnus-summary-reparent-children}).
+@node Persistent Articles
+@section Persistent Articles
+@cindex persistent articles
-@end table
+Closely related to article caching, we have @dfn{persistent articles}.
+In fact, it's just a different way of looking at caching, and much more
+useful in my opinion.
-The following commands are thread movement commands. They all
-understand the numeric prefix.
+Say you're reading a newsgroup, and you happen on to some valuable gem
+that you want to keep and treasure forever. You'd normally just save it
+(using one of the many saving commands) in some file. The problem with
+that is that it's just, well, yucky. Ideally you'd prefer just having
+the article remain in the group where you found it forever; untouched by
+the expiry going on at the news server.
-@table @kbd
+This is what a @dfn{persistent article} is---an article that just won't
+be deleted. It's implemented using the normal cache functions, but
+you use two explicit commands for managing persistent articles:
-@item T n
-@kindex T n (Summary)
-@itemx C-M-f
-@kindex C-M-n (Summary)
-@itemx M-down
-@kindex M-down (Summary)
-@findex gnus-summary-next-thread
-Go to the next thread (@code{gnus-summary-next-thread}).
+@table @kbd
-@item T p
-@kindex T p (Summary)
-@itemx C-M-b
-@kindex C-M-p (Summary)
-@itemx M-up
-@kindex M-up (Summary)
-@findex gnus-summary-prev-thread
-Go to the previous thread (@code{gnus-summary-prev-thread}).
+@item *
+@kindex * (Summary)
+@findex gnus-cache-enter-article
+Make the current article persistent (@code{gnus-cache-enter-article}).
-@item T d
-@kindex T d (Summary)
-@findex gnus-summary-down-thread
-Descend the thread (@code{gnus-summary-down-thread}).
+@item M-*
+@kindex M-* (Summary)
+@findex gnus-cache-remove-article
+Remove the current article from the persistent articles
+(@code{gnus-cache-remove-article}). This will normally delete the
+article.
+@end table
-@item T u
-@kindex T u (Summary)
-@findex gnus-summary-up-thread
-Ascend the thread (@code{gnus-summary-up-thread}).
+Both these commands understand the process/prefix convention.
-@item T o
-@kindex T o (Summary)
-@findex gnus-summary-top-thread
-Go to the top of the thread (@code{gnus-summary-top-thread}).
-@end table
+To avoid having all ticked articles (and stuff) entered into the cache,
+you should set @code{gnus-use-cache} to @code{passive} if you're just
+interested in persistent articles:
-@vindex gnus-thread-operation-ignore-subject
-If you ignore subject while threading, you'll naturally end up with
-threads that have several different subjects in them. If you then issue
-a command like @kbd{T k} (@code{gnus-summary-kill-thread}) you might not
-wish to kill the entire thread, but just those parts of the thread that
-have the same subject as the current article. If you like this idea,
-you can fiddle with @code{gnus-thread-operation-ignore-subject}. If it
-is non-@code{nil} (which it is by default), subjects will be ignored
-when doing thread commands. If this variable is @code{nil}, articles in
-the same thread with different subjects will not be included in the
-operation in question. If this variable is @code{fuzzy}, only articles
-that have subjects fuzzily equal will be included (@pxref{Fuzzy
-Matching}).
+@lisp
+(setq gnus-use-cache 'passive)
+@end lisp
+@node Sticky Articles
+@section Sticky Articles
+@cindex sticky articles
-@node Sorting the Summary Buffer
-@section Sorting the Summary Buffer
+When you select an article the current article buffer will be reused
+according to the value of the variable
+@code{gnus-single-article-buffer}. If its value is non-@code{nil} (the
+default) all articles reuse the same article buffer. Else each group
+has its own article buffer.
-@findex gnus-thread-sort-by-total-score
-@findex gnus-thread-sort-by-date
-@findex gnus-thread-sort-by-score
-@findex gnus-thread-sort-by-subject
-@findex gnus-thread-sort-by-author
-@findex gnus-thread-sort-by-recipient
-@findex gnus-thread-sort-by-number
-@findex gnus-thread-sort-by-random
-@vindex gnus-thread-sort-functions
-@findex gnus-thread-sort-by-most-recent-number
-@findex gnus-thread-sort-by-most-recent-date
-If you are using a threaded summary display, you can sort the threads by
-setting @code{gnus-thread-sort-functions}, which can be either a single
-function, a list of functions, or a list containing functions and
-@code{(not some-function)} elements.
+This implies that it's not possible to have more than one article buffer
+in a group at a time. But sometimes you might want to display all the
+latest emails from your mother, your father, your aunt, your uncle and
+your 17 cousins to coordinate the next christmas party.
-By default, sorting is done on article numbers. Ready-made sorting
-predicate functions include @code{gnus-thread-sort-by-number},
-@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-recipient},
-@code{gnus-thread-sort-by-subject},
-@code{gnus-thread-sort-by-date},
-@code{gnus-thread-sort-by-score},
-@code{gnus-thread-sort-by-most-recent-number},
-@code{gnus-thread-sort-by-most-recent-date},
-@code{gnus-thread-sort-by-random} and
-@code{gnus-thread-sort-by-total-score}.
+That's where sticky articles come in handy. A sticky article buffer
+basically is a normal article buffer, but it won't be reused when you
+select another article. You can make an article sticky with:
-Each function takes two threads and returns non-@code{nil} if the first
-thread should be sorted before the other. Note that sorting really is
-normally done by looking only at the roots of each thread.
+@table @kbd
+@item A S
+@kindex A S (Summary)
+@findex gnus-sticky-article
+Make the current article sticky. If a prefix arg is given, ask for a
+name for this sticky article buffer.
+@end table
-If you use more than one function, the primary sort key should be the
-last function in the list. You should probably always include
-@code{gnus-thread-sort-by-number} in the list of sorting
-functions---preferably first. This will ensure that threads that are
-equal with respect to the other sort criteria will be displayed in
-ascending article order.
+To close a sticky article buffer you can use these commands:
-If you would like to sort by reverse score, then by subject, and finally
-by number, you could do something like:
+@table @kbd
+@item q
+@kindex q (Article)
+@findex bury-buffer
+Puts this sticky article buffer at the end of the list of all buffers.
-@lisp
-(setq gnus-thread-sort-functions
- '(gnus-thread-sort-by-number
- gnus-thread-sort-by-subject
- (not gnus-thread-sort-by-total-score)))
-@end lisp
+@item k
+@kindex k (Article)
+@findex gnus-kill-sticky-article-buffer
+Kills this sticky article buffer.
+@end table
-The threads that have highest score will be displayed first in the
-summary buffer. When threads have the same score, they will be sorted
-alphabetically. The threads that have the same score and the same
-subject will be sorted by number, which is (normally) the sequence in
-which the articles arrived.
+To kill all sticky article buffers you can use:
-If you want to sort by score and then reverse arrival order, you could
-say something like:
+@defun gnus-kill-sticky-article-buffers ARG
+Kill all sticky article buffers.
+If a prefix ARG is given, ask for confirmation.
+@end defun
-@lisp
-(setq gnus-thread-sort-functions
- '((not gnus-thread-sort-by-number)
- gnus-thread-sort-by-score))
-@end lisp
+@node Article Backlog
+@section Article Backlog
+@cindex backlog
+@cindex article backlog
-@vindex gnus-thread-score-function
-The function in the @code{gnus-thread-score-function} variable (default
-@code{+}) is used for calculating the total score of a thread. Useful
-functions might be @code{max}, @code{min}, or squared means, or whatever
-tickles your fancy.
+If you have a slow connection, but the idea of using caching seems
+unappealing to you (and it is, really), you can help the situation some
+by switching on the @dfn{backlog}. This is where Gnus will buffer
+already read articles so that it doesn't have to re-fetch articles
+you've already read. This only helps if you are in the habit of
+re-selecting articles you've recently read, of course. If you never do
+that, turning the backlog on will slow Gnus down a little bit, and
+increase memory usage some.
-@findex gnus-article-sort-functions
-@findex gnus-article-sort-by-date
-@findex gnus-article-sort-by-most-recent-date
-@findex gnus-article-sort-by-score
-@findex gnus-article-sort-by-subject
-@findex gnus-article-sort-by-author
-@findex gnus-article-sort-by-random
-@findex gnus-article-sort-by-number
-@findex gnus-article-sort-by-most-recent-number
-If you are using an unthreaded display for some strange reason or
-other, you have to fiddle with the @code{gnus-article-sort-functions}
-variable. It is very similar to the
-@code{gnus-thread-sort-functions}, except that it uses slightly
-different functions for article comparison. Available sorting
-predicate functions are @code{gnus-article-sort-by-number},
-@code{gnus-article-sort-by-author},
-@code{gnus-article-sort-by-subject}, @code{gnus-article-sort-by-date},
-@code{gnus-article-sort-by-random}, and
-@code{gnus-article-sort-by-score}.
+@vindex gnus-keep-backlog
+If you set @code{gnus-keep-backlog} to a number @var{n}, Gnus will store
+at most @var{n} old articles in a buffer for later re-fetching. If this
+variable is non-@code{nil} and is not a number, Gnus will store
+@emph{all} read articles, which means that your Emacs will grow without
+bound before exploding and taking your machine down with you. I put
+that in there just to keep y'all on your toes.
-If you want to sort an unthreaded summary display by subject, you could
-say something like:
+The default value is 20.
-@lisp
-(setq gnus-article-sort-functions
- '(gnus-article-sort-by-number
- gnus-article-sort-by-subject))
-@end lisp
-You can define group specific sorting via @code{gnus-parameters},
-@xref{Group Parameters}.
+@node Saving Articles
+@section Saving Articles
+@cindex saving articles
+Gnus can save articles in a number of ways. Below is the documentation
+for saving articles in a fairly straight-forward fashion (i.e., little
+processing of the article is done before it is saved). For a different
+approach (uudecoding, unsharing) you should use @code{gnus-uu}
+(@pxref{Decoding Articles}).
-@node Asynchronous Fetching
-@section Asynchronous Article Fetching
-@cindex asynchronous article fetching
-@cindex article pre-fetch
-@cindex pre-fetch
+For the commands listed here, the target is a file. If you want to
+save to a group, see the @kbd{B c} (@code{gnus-summary-copy-article})
+command (@pxref{Mail Group Commands}).
-If you read your news from an @acronym{NNTP} server that's far away, the
-network latencies may make reading articles a chore. You have to wait
-for a while after pressing @kbd{n} to go to the next article before the
-article appears. Why can't Gnus just go ahead and fetch the article
-while you are reading the previous one? Why not, indeed.
+@vindex gnus-save-all-headers
+If @code{gnus-save-all-headers} is non-@code{nil}, Gnus will not delete
+unwanted headers before saving the article.
-First, some caveats. There are some pitfalls to using asynchronous
-article fetching, especially the way Gnus does it.
+@vindex gnus-saved-headers
+If the preceding variable is @code{nil}, all headers that match the
+@code{gnus-saved-headers} regexp will be kept, while the rest will be
+deleted before saving.
-Let's say you are reading article 1, which is short, and article 2 is
-quite long, and you are not interested in reading that. Gnus does not
-know this, so it goes ahead and fetches article 2. You decide to read
-article 3, but since Gnus is in the process of fetching article 2, the
-connection is blocked.
+@table @kbd
-To avoid these situations, Gnus will open two (count 'em two)
-connections to the server. Some people may think this isn't a very nice
-thing to do, but I don't see any real alternatives. Setting up that
-extra connection takes some time, so Gnus startup will be slower.
+@item O o
+@itemx o
+@kindex O o (Summary)
+@kindex o (Summary)
+@findex gnus-summary-save-article
+@c @icon{gnus-summary-save-article}
+Save the current article using the default article saver
+(@code{gnus-summary-save-article}).
-Gnus will fetch more articles than you will read. This will mean that
-the link between your machine and the @acronym{NNTP} server will become more
-loaded than if you didn't use article pre-fetch. The server itself will
-also become more loaded---both with the extra article requests, and the
-extra connection.
+@item O m
+@kindex O m (Summary)
+@findex gnus-summary-save-article-mail
+Save the current article in a Unix mail box (mbox) file
+(@code{gnus-summary-save-article-mail}).
-Ok, so now you know that you shouldn't really use this thing@dots{} unless
-you really want to.
+@item O r
+@kindex O r (Summary)
+@findex gnus-summary-save-article-rmail
+Save the current article in Rmail format
+(@code{gnus-summary-save-article-rmail}). This is mbox since Emacs 23,
+Babyl in older versions.
-@vindex gnus-asynchronous
-Here's how: Set @code{gnus-asynchronous} to @code{t}. The rest should
-happen automatically.
+@item O f
+@kindex O f (Summary)
+@findex gnus-summary-save-article-file
+@c @icon{gnus-summary-save-article-file}
+Save the current article in plain file format
+(@code{gnus-summary-save-article-file}).
-@vindex gnus-use-article-prefetch
-You can control how many articles are to be pre-fetched by setting
-@code{gnus-use-article-prefetch}. This is 30 by default, which means
-that when you read an article in the group, the back end will pre-fetch
-the next 30 articles. If this variable is @code{t}, the back end will
-pre-fetch all the articles it can without bound. If it is
-@code{nil}, no pre-fetching will be done.
+@item O F
+@kindex O F (Summary)
+@findex gnus-summary-write-article-file
+Write the current article in plain file format, overwriting any previous
+file contents (@code{gnus-summary-write-article-file}).
-@vindex gnus-async-prefetch-article-p
-@findex gnus-async-unread-p
-There are probably some articles that you don't want to pre-fetch---read
-articles, for instance. The @code{gnus-async-prefetch-article-p}
-variable controls whether an article is to be pre-fetched. This
-function should return non-@code{nil} when the article in question is
-to be pre-fetched. The default is @code{gnus-async-unread-p}, which
-returns @code{nil} on read articles. The function is called with an
-article data structure as the only parameter.
+@item O b
+@kindex O b (Summary)
+@findex gnus-summary-save-article-body-file
+Save the current article body in plain file format
+(@code{gnus-summary-save-article-body-file}).
+
+@item O h
+@kindex O h (Summary)
+@findex gnus-summary-save-article-folder
+Save the current article in mh folder format
+(@code{gnus-summary-save-article-folder}).
+
+@item O v
+@kindex O v (Summary)
+@findex gnus-summary-save-article-vm
+Save the current article in a VM folder
+(@code{gnus-summary-save-article-vm}).
-If, for instance, you wish to pre-fetch only unread articles shorter
-than 100 lines, you could say something like:
+@item O p
+@itemx |
+@kindex O p (Summary)
+@kindex | (Summary)
+@findex gnus-summary-pipe-output
+@vindex gnus-summary-pipe-output-default-command
+Save the current article in a pipe. Uhm, like, what I mean is---Pipe
+the current article to a process (@code{gnus-summary-pipe-output}).
+If given a symbolic prefix (@pxref{Symbolic Prefixes}), include the
+complete headers in the piped output. The symbolic prefix @code{r} is
+special; it lets this command pipe a raw article including all headers.
+The @code{gnus-summary-pipe-output-default-command} variable can be set
+to a string containing the default command and options (default
+@code{nil}).
-@lisp
-(defun my-async-short-unread-p (data)
- "Return non-nil for short, unread articles."
- (and (gnus-data-unread-p data)
- (< (mail-header-lines (gnus-data-header data))
- 100)))
+@item O P
+@kindex O P (Summary)
+@findex gnus-summary-muttprint
+@vindex gnus-summary-muttprint-program
+Save the current article into muttprint. That is, print it using the
+external program @uref{http://muttprint.sourceforge.net/,
+Muttprint}. The program name and options to use is controlled by the
+variable @code{gnus-summary-muttprint-program}.
+(@code{gnus-summary-muttprint}).
-(setq gnus-async-prefetch-article-p 'my-async-short-unread-p)
-@end lisp
+@end table
-These functions will be called many, many times, so they should
-preferably be short and sweet to avoid slowing down Gnus too much.
-It's probably a good idea to byte-compile things like this.
+@vindex gnus-prompt-before-saving
+All these commands use the process/prefix convention
+(@pxref{Process/Prefix}). If you save bunches of articles using these
+functions, you might get tired of being prompted for files to save each
+and every article in. The prompting action is controlled by
+the @code{gnus-prompt-before-saving} variable, which is @code{always} by
+default, giving you that excessive prompting action you know and
+loathe. If you set this variable to @code{t} instead, you'll be prompted
+just once for each series of articles you save. If you like to really
+have Gnus do all your thinking for you, you can even set this variable
+to @code{nil}, which means that you will never be prompted for files to
+save articles in. Gnus will simply save all the articles in the default
+files.
-@vindex gnus-async-post-fetch-function
-@findex gnus-html-prefetch-images
-After an article has been prefetched, this
-@code{gnus-async-post-fetch-function} will be called. The buffer will
-be narrowed to the region of the article that was fetched. A useful
-value would be @code{gnus-html-prefetch-images}, which will prefetch
-and store images referenced in the article, so that you don't have to
-wait for them to be fetched when you read the article. This is useful
-for @acronym{HTML} messages that have external images.
-@vindex gnus-prefetched-article-deletion-strategy
-Articles have to be removed from the asynch buffer sooner or later. The
-@code{gnus-prefetched-article-deletion-strategy} says when to remove
-articles. This is a list that may contain the following elements:
+@vindex gnus-default-article-saver
+You can customize the @code{gnus-default-article-saver} variable to make
+Gnus do what you want it to. You can use any of the eight ready-made
+functions below, or you can create your own.
@table @code
-@item read
-Remove articles when they are read.
-@item exit
-Remove articles when exiting the group.
-@end table
+@item gnus-summary-save-in-rmail
+@findex gnus-summary-save-in-rmail
+@vindex gnus-rmail-save-name
+@findex gnus-plain-save-name
+This is the default format, that used by the Rmail package. Since Emacs
+23, Rmail uses standard mbox format. Before this, it used the
+@dfn{Babyl} format. Accordingly, this command writes mbox format since
+Emacs 23, unless appending to an existing Babyl file. In older versions
+of Emacs, it always uses Babyl format. Uses the function in the
+@code{gnus-rmail-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-plain-save-name}.
-The default value is @code{(read exit)}.
+@item gnus-summary-save-in-mail
+@findex gnus-summary-save-in-mail
+@vindex gnus-mail-save-name
+Save in a Unix mail (mbox) file. Uses the function in the
+@code{gnus-mail-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-plain-save-name}.
-@c @vindex gnus-use-header-prefetch
-@c If @code{gnus-use-header-prefetch} is non-@code{nil}, prefetch articles
-@c from the next group.
+@item gnus-summary-save-in-file
+@findex gnus-summary-save-in-file
+@vindex gnus-file-save-name
+@findex gnus-numeric-save-name
+Append the article straight to an ordinary file. Uses the function in
+the @code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
+@item gnus-summary-write-to-file
+@findex gnus-summary-write-to-file
+Write the article straight to an ordinary file. The file is
+overwritten if it exists. Uses the function in the
+@code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
-@node Article Caching
-@section Article Caching
-@cindex article caching
-@cindex caching
+@item gnus-summary-save-body-in-file
+@findex gnus-summary-save-body-in-file
+Append the article body to an ordinary file. Uses the function in the
+@code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
-If you have an @emph{extremely} slow @acronym{NNTP} connection, you may
-consider turning article caching on. Each article will then be stored
-locally under your home directory. As you may surmise, this could
-potentially use @emph{huge} amounts of disk space, as well as eat up all
-your inodes so fast it will make your head swim. In vodka.
+@item gnus-summary-write-body-to-file
+@findex gnus-summary-write-body-to-file
+Write the article body straight to an ordinary file. The file is
+overwritten if it exists. Uses the function in the
+@code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
-Used carefully, though, it could be just an easier way to save articles.
+@item gnus-summary-save-in-folder
+@findex gnus-summary-save-in-folder
+@findex gnus-folder-save-name
+@findex gnus-Folder-save-name
+@vindex gnus-folder-save-name
+@cindex rcvstore
+@cindex MH folders
+Save the article to an MH folder using @code{rcvstore} from the MH
+library. Uses the function in the @code{gnus-folder-save-name} variable
+to get a file name to save the article in. The default is
+@code{gnus-folder-save-name}, but you can also use
+@code{gnus-Folder-save-name}, which creates capitalized names.
-@vindex gnus-use-long-file-name
-@vindex gnus-cache-directory
-@vindex gnus-use-cache
-To turn caching on, set @code{gnus-use-cache} to @code{t}. By default,
-all articles ticked or marked as dormant will then be copied
-over to your local cache (@code{gnus-cache-directory}). Whether this
-cache is flat or hierarchical is controlled by the
-@code{gnus-use-long-file-name} variable, as usual.
+@item gnus-summary-save-in-vm
+@findex gnus-summary-save-in-vm
+Save the article in a VM folder. You have to have the VM mail
+reader to use this setting.
-When re-selecting a ticked or dormant article, it will be fetched from the
-cache instead of from the server. As articles in your cache will never
-expire, this might serve as a method of saving articles while still
-keeping them where they belong. Just mark all articles you want to save
-as dormant, and don't worry.
+@item gnus-summary-save-in-pipe
+@findex gnus-summary-save-in-pipe
+Pipe the article to a shell command. This function takes optional two
+arguments COMMAND and RAW. Valid values for COMMAND include:
-When an article is marked as read, is it removed from the cache.
+@itemize @bullet
+@item a string@*
+The executable command name and possibly arguments.
+@item @code{nil}@*
+You will be prompted for the command in the minibuffer.
+@item the symbol @code{default}@*
+It will be replaced with the command which the variable
+@code{gnus-summary-pipe-output-default-command} holds or the command
+last used for saving.
+@end itemize
-@vindex gnus-cache-remove-articles
-@vindex gnus-cache-enter-articles
-The entering/removal of articles from the cache is controlled by the
-@code{gnus-cache-enter-articles} and @code{gnus-cache-remove-articles}
-variables. Both are lists of symbols. The first is @code{(ticked
-dormant)} by default, meaning that ticked and dormant articles will be
-put in the cache. The latter is @code{(read)} by default, meaning that
-articles marked as read are removed from the cache. Possibly
-symbols in these two lists are @code{ticked}, @code{dormant},
-@code{unread} and @code{read}.
+Non-@code{nil} value for RAW overrides @code{:decode} and
+@code{:headers} properties (see below) and the raw article including all
+headers will be piped.
+@end table
-@findex gnus-jog-cache
-So where does the massive article-fetching and storing come into the
-picture? The @code{gnus-jog-cache} command will go through all
-subscribed newsgroups, request all unread articles, score them, and
-store them in the cache. You should only ever, ever ever ever, use this
-command if 1) your connection to the @acronym{NNTP} server is really, really,
-really slow and 2) you have a really, really, really huge disk.
-Seriously. One way to cut down on the number of articles downloaded is
-to score unwanted articles down and have them marked as read. They will
-not then be downloaded by this command.
+The symbol of each function may have the following properties:
-@vindex gnus-uncacheable-groups
-@vindex gnus-cacheable-groups
-It is likely that you do not want caching on all groups. For instance,
-if your @code{nnml} mail is located under your home directory, it makes no
-sense to cache it somewhere else under your home directory. Unless you
-feel that it's neat to use twice as much space.
+@table @code
+@item :decode
+The value non-@code{nil} means save decoded articles. This is
+meaningful only with @code{gnus-summary-save-in-file},
+@code{gnus-summary-save-body-in-file},
+@code{gnus-summary-write-to-file},
+@code{gnus-summary-write-body-to-file}, and
+@code{gnus-summary-save-in-pipe}.
-To limit the caching, you could set @code{gnus-cacheable-groups} to a
-regexp of groups to cache, @samp{^nntp} for instance, or set the
-@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
-Both variables are @code{nil} by default. If a group matches both
-variables, the group is not cached.
+@item :function
+The value specifies an alternative function which appends, not
+overwrites, articles to a file. This implies that when saving many
+articles at a time, @code{gnus-prompt-before-saving} is bound to
+@code{t} and all articles are saved in a single file. This is
+meaningful only with @code{gnus-summary-write-to-file} and
+@code{gnus-summary-write-body-to-file}.
-@findex gnus-cache-generate-nov-databases
-@findex gnus-cache-generate-active
-@vindex gnus-cache-active-file
-The cache stores information on what articles it contains in its active
-file (@code{gnus-cache-active-file}). If this file (or any other parts
-of the cache) becomes all messed up for some reason or other, Gnus
-offers two functions that will try to set things right. @kbd{M-x
-gnus-cache-generate-nov-databases} will (re)build all the @acronym{NOV}
-files, and @kbd{gnus-cache-generate-active} will (re)generate the active
-file.
+@item :headers
+The value specifies the symbol of a variable of which the value
+specifies headers to be saved. If it is omitted,
+@code{gnus-save-all-headers} and @code{gnus-saved-headers} control what
+headers should be saved.
+@end table
-@findex gnus-cache-move-cache
-@code{gnus-cache-move-cache} will move your whole
-@code{gnus-cache-directory} to some other location. You get asked to
-where, isn't that cool?
+@vindex gnus-article-save-directory
+All of these functions, except for the last one, will save the article
+in the @code{gnus-article-save-directory}, which is initialized from the
+@env{SAVEDIR} environment variable. This is @file{~/News/} by
+default.
-@node Persistent Articles
-@section Persistent Articles
-@cindex persistent articles
+As you can see above, the functions use different functions to find a
+suitable name of a file to save the article in. Below is a list of
+available functions that generate names:
-Closely related to article caching, we have @dfn{persistent articles}.
-In fact, it's just a different way of looking at caching, and much more
-useful in my opinion.
+@table @code
-Say you're reading a newsgroup, and you happen on to some valuable gem
-that you want to keep and treasure forever. You'd normally just save it
-(using one of the many saving commands) in some file. The problem with
-that is that it's just, well, yucky. Ideally you'd prefer just having
-the article remain in the group where you found it forever; untouched by
-the expiry going on at the news server.
+@item gnus-Numeric-save-name
+@findex gnus-Numeric-save-name
+File names like @file{~/News/Alt.andrea-dworkin/45}.
-This is what a @dfn{persistent article} is---an article that just won't
-be deleted. It's implemented using the normal cache functions, but
-you use two explicit commands for managing persistent articles:
+@item gnus-numeric-save-name
+@findex gnus-numeric-save-name
+File names like @file{~/News/alt.andrea-dworkin/45}.
-@table @kbd
+@item gnus-Plain-save-name
+@findex gnus-Plain-save-name
+File names like @file{~/News/Alt.andrea-dworkin}.
-@item *
-@kindex * (Summary)
-@findex gnus-cache-enter-article
-Make the current article persistent (@code{gnus-cache-enter-article}).
+@item gnus-plain-save-name
+@findex gnus-plain-save-name
+File names like @file{~/News/alt.andrea-dworkin}.
-@item M-*
-@kindex M-* (Summary)
-@findex gnus-cache-remove-article
-Remove the current article from the persistent articles
-(@code{gnus-cache-remove-article}). This will normally delete the
-article.
+@item gnus-sender-save-name
+@findex gnus-sender-save-name
+File names like @file{~/News/larsi}.
@end table
-Both these commands understand the process/prefix convention.
-
-To avoid having all ticked articles (and stuff) entered into the cache,
-you should set @code{gnus-use-cache} to @code{passive} if you're just
-interested in persistent articles:
+@vindex gnus-split-methods
+You can have Gnus suggest where to save articles by plonking a regexp into
+the @code{gnus-split-methods} alist. For instance, if you would like to
+save articles related to Gnus in the file @file{gnus-stuff}, and articles
+related to VM in @file{vm-stuff}, you could set this variable to something
+like:
@lisp
-(setq gnus-use-cache 'passive)
+(("^Subject:.*gnus\\|^Newsgroups:.*gnus" "gnus-stuff")
+ ("^Subject:.*vm\\|^Xref:.*vm" "vm-stuff")
+ (my-choosing-function "../other-dir/my-stuff")
+ ((equal gnus-newsgroup-name "mail.misc") "mail-stuff"))
@end lisp
-@node Sticky Articles
-@section Sticky Articles
-@cindex sticky articles
-
-When you select an article the current article buffer will be reused
-according to the value of the variable
-@code{gnus-single-article-buffer}. If its value is non-@code{nil} (the
-default) all articles reuse the same article buffer. Else each group
-has its own article buffer.
+We see that this is a list where each element is a list that has two
+elements---the @dfn{match} and the @dfn{file}. The match can either be
+a string (in which case it is used as a regexp to match on the article
+head); it can be a symbol (which will be called as a function with the
+group name as a parameter); or it can be a list (which will be
+@code{eval}ed). If any of these actions have a non-@code{nil} result,
+the @dfn{file} will be used as a default prompt. In addition, the
+result of the operation itself will be used if the function or form
+called returns a string or a list of strings.
-This implies that it's not possible to have more than one article buffer
-in a group at a time. But sometimes you might want to display all the
-latest emails from your mother, your father, your aunt, your uncle and
-your 17 cousins to coordinate the next christmas party.
+You basically end up with a list of file names that might be used when
+saving the current article. (All ``matches'' will be used.) You will
+then be prompted for what you really want to use as a name, with file
+name completion over the results from applying this variable.
-That's where sticky articles come in handy. A sticky article buffer
-basically is a normal article buffer, but it won't be reused when you
-select another article. You can make an article sticky with:
+This variable is @code{((gnus-article-archive-name))} by default, which
+means that Gnus will look at the articles it saves for an
+@code{Archive-name} line and use that as a suggestion for the file
+name.
-@table @kbd
-@item A S
-@kindex A S (Summary)
-@findex gnus-sticky-article
-Make the current article sticky. If a prefix arg is given, ask for a
-name for this sticky article buffer.
-@end table
+Here's an example function to clean up file names somewhat. If you have
+lots of mail groups called things like
+@samp{nnml:mail.whatever}, you may want to chop off the beginning of
+these group names before creating the file name to save to. The
+following will do just that:
-To close a sticky article buffer you can use these commands:
+@lisp
+(defun my-save-name (group)
+ (when (string-match "^nnml:mail." group)
+ (substring group (match-end 0))))
-@table @kbd
-@item q
-@kindex q (Article)
-@findex bury-buffer
-Puts this sticky article buffer at the end of the list of all buffers.
+(setq gnus-split-methods
+ '((gnus-article-archive-name)
+ (my-save-name)))
+@end lisp
-@item k
-@kindex k (Article)
-@findex gnus-kill-sticky-article-buffer
-Kills this sticky article buffer.
-@end table
-To kill all sticky article buffers you can use:
+@vindex gnus-use-long-file-name
+Finally, you have the @code{gnus-use-long-file-name} variable. If it is
+@code{nil}, all the preceding functions will replace all periods
+(@samp{.}) in the group names with slashes (@samp{/})---which means that
+the functions will generate hierarchies of directories instead of having
+all the files in the top level directory
+(@file{~/News/alt/andrea-dworkin} instead of
+@file{~/News/alt.andrea-dworkin}.) This variable is @code{t} by default
+on most systems. However, for historical reasons, this is @code{nil} on
+Xenix and usg-unix-v machines by default.
-@defun gnus-kill-sticky-article-buffers ARG
-Kill all sticky article buffers.
-If a prefix ARG is given, ask for confirmation.
-@end defun
+This function also affects kill and score file names. If this variable
+is a list, and the list contains the element @code{not-score}, long file
+names will not be used for score files, if it contains the element
+@code{not-save}, long file names will not be used for saving, and if it
+contains the element @code{not-kill}, long file names will not be used
+for kill files.
-@node Article Backlog
-@section Article Backlog
-@cindex backlog
-@cindex article backlog
+If you'd like to save articles in a hierarchy that looks something like
+a spool, you could
-If you have a slow connection, but the idea of using caching seems
-unappealing to you (and it is, really), you can help the situation some
-by switching on the @dfn{backlog}. This is where Gnus will buffer
-already read articles so that it doesn't have to re-fetch articles
-you've already read. This only helps if you are in the habit of
-re-selecting articles you've recently read, of course. If you never do
-that, turning the backlog on will slow Gnus down a little bit, and
-increase memory usage some.
+@lisp
+(setq gnus-use-long-file-name '(not-save)) ; @r{to get a hierarchy}
+(setq gnus-default-article-saver
+ 'gnus-summary-save-in-file) ; @r{no encoding}
+@end lisp
-@vindex gnus-keep-backlog
-If you set @code{gnus-keep-backlog} to a number @var{n}, Gnus will store
-at most @var{n} old articles in a buffer for later re-fetching. If this
-variable is non-@code{nil} and is not a number, Gnus will store
-@emph{all} read articles, which means that your Emacs will grow without
-bound before exploding and taking your machine down with you. I put
-that in there just to keep y'all on your toes.
+Then just save with @kbd{o}. You'd then read this hierarchy with
+ephemeral @code{nneething} groups---@kbd{G D} in the group buffer, and
+the top level directory as the argument (@file{~/News/}). Then just walk
+around to the groups/directories with @code{nneething}.
-The default value is 20.
+@node Decoding Articles
+@section Decoding Articles
+@cindex decoding articles
-@node Saving Articles
-@section Saving Articles
-@cindex saving articles
+Sometime users post articles (or series of articles) that have been
+encoded in some way or other. Gnus can decode them for you.
-Gnus can save articles in a number of ways. Below is the documentation
-for saving articles in a fairly straight-forward fashion (i.e., little
-processing of the article is done before it is saved). For a different
-approach (uudecoding, unsharing) you should use @code{gnus-uu}
-(@pxref{Decoding Articles}).
+@menu
+* Uuencoded Articles:: Uudecode articles.
+* Shell Archives:: Unshar articles.
+* PostScript Files:: Split PostScript.
+* Other Files:: Plain save and binhex.
+* Decoding Variables:: Variables for a happy decoding.
+* Viewing Files:: You want to look at the result of the decoding?
+@end menu
-For the commands listed here, the target is a file. If you want to
-save to a group, see the @kbd{B c} (@code{gnus-summary-copy-article})
-command (@pxref{Mail Group Commands}).
+@cindex series
+@cindex article series
+All these functions use the process/prefix convention
+(@pxref{Process/Prefix}) for finding out what articles to work on, with
+the extension that a ``single article'' means ``a single series''. Gnus
+can find out by itself what articles belong to a series, decode all the
+articles and unpack/view/save the resulting file(s).
-@vindex gnus-save-all-headers
-If @code{gnus-save-all-headers} is non-@code{nil}, Gnus will not delete
-unwanted headers before saving the article.
+Gnus guesses what articles are in the series according to the following
+simplish rule: The subjects must be (nearly) identical, except for the
+last two numbers of the line. (Spaces are largely ignored, however.)
-@vindex gnus-saved-headers
-If the preceding variable is @code{nil}, all headers that match the
-@code{gnus-saved-headers} regexp will be kept, while the rest will be
-deleted before saving.
+For example: If you choose a subject called @samp{cat.gif (2/3)}, Gnus
+will find all the articles that match the regexp @samp{^cat.gif
+([0-9]+/[0-9]+).*$}.
-@table @kbd
+Subjects that are non-standard, like @samp{cat.gif (2/3) Part 6 of a
+series}, will not be properly recognized by any of the automatic viewing
+commands, and you have to mark the articles manually with @kbd{#}.
-@item O o
-@itemx o
-@kindex O o (Summary)
-@kindex o (Summary)
-@findex gnus-summary-save-article
-@c @icon{gnus-summary-save-article}
-Save the current article using the default article saver
-(@code{gnus-summary-save-article}).
-@item O m
-@kindex O m (Summary)
-@findex gnus-summary-save-article-mail
-Save the current article in a Unix mail box (mbox) file
-(@code{gnus-summary-save-article-mail}).
+@node Uuencoded Articles
+@subsection Uuencoded Articles
+@cindex uudecode
+@cindex uuencoded articles
-@item O r
-@kindex O r (Summary)
-@findex gnus-summary-save-article-rmail
-Save the current article in Rmail format
-(@code{gnus-summary-save-article-rmail}). This is mbox since Emacs 23,
-Babyl in older versions.
+@table @kbd
-@item O f
-@kindex O f (Summary)
-@findex gnus-summary-save-article-file
-@c @icon{gnus-summary-save-article-file}
-Save the current article in plain file format
-(@code{gnus-summary-save-article-file}).
+@item X u
+@kindex X u (Summary)
+@findex gnus-uu-decode-uu
+@c @icon{gnus-uu-decode-uu}
+Uudecodes the current series (@code{gnus-uu-decode-uu}).
-@item O F
-@kindex O F (Summary)
-@findex gnus-summary-write-article-file
-Write the current article in plain file format, overwriting any previous
-file contents (@code{gnus-summary-write-article-file}).
+@item X U
+@kindex X U (Summary)
+@findex gnus-uu-decode-uu-and-save
+Uudecodes and saves the current series
+(@code{gnus-uu-decode-uu-and-save}).
-@item O b
-@kindex O b (Summary)
-@findex gnus-summary-save-article-body-file
-Save the current article body in plain file format
-(@code{gnus-summary-save-article-body-file}).
+@item X v u
+@kindex X v u (Summary)
+@findex gnus-uu-decode-uu-view
+Uudecodes and views the current series (@code{gnus-uu-decode-uu-view}).
-@item O h
-@kindex O h (Summary)
-@findex gnus-summary-save-article-folder
-Save the current article in mh folder format
-(@code{gnus-summary-save-article-folder}).
+@item X v U
+@kindex X v U (Summary)
+@findex gnus-uu-decode-uu-and-save-view
+Uudecodes, views and saves the current series
+(@code{gnus-uu-decode-uu-and-save-view}).
-@item O v
-@kindex O v (Summary)
-@findex gnus-summary-save-article-vm
-Save the current article in a VM folder
-(@code{gnus-summary-save-article-vm}).
+@end table
-@item O p
-@itemx |
-@kindex O p (Summary)
-@kindex | (Summary)
-@findex gnus-summary-pipe-output
-@vindex gnus-summary-pipe-output-default-command
-Save the current article in a pipe. Uhm, like, what I mean is---Pipe
-the current article to a process (@code{gnus-summary-pipe-output}).
-If given a symbolic prefix (@pxref{Symbolic Prefixes}), include the
-complete headers in the piped output. The symbolic prefix @code{r} is
-special; it lets this command pipe a raw article including all headers.
-The @code{gnus-summary-pipe-output-default-command} variable can be set
-to a string containing the default command and options (default
-@code{nil}).
+Remember that these all react to the presence of articles marked with
+the process mark. If, for instance, you'd like to decode and save an
+entire newsgroup, you'd typically do @kbd{M P a}
+(@code{gnus-uu-mark-all}) and then @kbd{X U}
+(@code{gnus-uu-decode-uu-and-save}).
-@item O P
-@kindex O P (Summary)
-@findex gnus-summary-muttprint
-@vindex gnus-summary-muttprint-program
-Save the current article into muttprint. That is, print it using the
-external program @uref{http://muttprint.sourceforge.net/,
-Muttprint}. The program name and options to use is controlled by the
-variable @code{gnus-summary-muttprint-program}.
-(@code{gnus-summary-muttprint}).
+All this is very much different from how @code{gnus-uu} worked with
+@sc{gnus 4.1}, where you had explicit keystrokes for everything under
+the sun. This version of @code{gnus-uu} generally assumes that you mark
+articles in some way (@pxref{Setting Process Marks}) and then press
+@kbd{X u}.
-@end table
+@vindex gnus-uu-notify-files
+Note: When trying to decode articles that have names matching
+@code{gnus-uu-notify-files}, which is hard-coded to
+@samp{[Cc][Ii][Nn][Dd][Yy][0-9]+.\\(gif\\|jpg\\)}, @code{gnus-uu} will
+automatically post an article on @samp{comp.unix.wizards} saying that
+you have just viewed the file in question. This feature can't be turned
+off.
-@vindex gnus-prompt-before-saving
-All these commands use the process/prefix convention
-(@pxref{Process/Prefix}). If you save bunches of articles using these
-functions, you might get tired of being prompted for files to save each
-and every article in. The prompting action is controlled by
-the @code{gnus-prompt-before-saving} variable, which is @code{always} by
-default, giving you that excessive prompting action you know and
-loathe. If you set this variable to @code{t} instead, you'll be prompted
-just once for each series of articles you save. If you like to really
-have Gnus do all your thinking for you, you can even set this variable
-to @code{nil}, which means that you will never be prompted for files to
-save articles in. Gnus will simply save all the articles in the default
-files.
+@node Shell Archives
+@subsection Shell Archives
+@cindex unshar
+@cindex shell archives
+@cindex shared articles
-@vindex gnus-default-article-saver
-You can customize the @code{gnus-default-article-saver} variable to make
-Gnus do what you want it to. You can use any of the eight ready-made
-functions below, or you can create your own.
+Shell archives (``shar files'') used to be a popular way to distribute
+sources, but it isn't used all that much today. In any case, we have
+some commands to deal with these:
-@table @code
+@table @kbd
-@item gnus-summary-save-in-rmail
-@findex gnus-summary-save-in-rmail
-@vindex gnus-rmail-save-name
-@findex gnus-plain-save-name
-This is the default format, that used by the Rmail package. Since Emacs
-23, Rmail uses standard mbox format. Before this, it used the
-@dfn{Babyl} format. Accordingly, this command writes mbox format since
-Emacs 23, unless appending to an existing Babyl file. In older versions
-of Emacs, it always uses Babyl format. Uses the function in the
-@code{gnus-rmail-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-plain-save-name}.
+@item X s
+@kindex X s (Summary)
+@findex gnus-uu-decode-unshar
+Unshars the current series (@code{gnus-uu-decode-unshar}).
-@item gnus-summary-save-in-mail
-@findex gnus-summary-save-in-mail
-@vindex gnus-mail-save-name
-Save in a Unix mail (mbox) file. Uses the function in the
-@code{gnus-mail-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-plain-save-name}.
+@item X S
+@kindex X S (Summary)
+@findex gnus-uu-decode-unshar-and-save
+Unshars and saves the current series (@code{gnus-uu-decode-unshar-and-save}).
-@item gnus-summary-save-in-file
-@findex gnus-summary-save-in-file
-@vindex gnus-file-save-name
-@findex gnus-numeric-save-name
-Append the article straight to an ordinary file. Uses the function in
-the @code{gnus-file-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-numeric-save-name}.
+@item X v s
+@kindex X v s (Summary)
+@findex gnus-uu-decode-unshar-view
+Unshars and views the current series (@code{gnus-uu-decode-unshar-view}).
-@item gnus-summary-write-to-file
-@findex gnus-summary-write-to-file
-Write the article straight to an ordinary file. The file is
-overwritten if it exists. Uses the function in the
-@code{gnus-file-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-numeric-save-name}.
+@item X v S
+@kindex X v S (Summary)
+@findex gnus-uu-decode-unshar-and-save-view
+Unshars, views and saves the current series
+(@code{gnus-uu-decode-unshar-and-save-view}).
+@end table
-@item gnus-summary-save-body-in-file
-@findex gnus-summary-save-body-in-file
-Append the article body to an ordinary file. Uses the function in the
-@code{gnus-file-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-numeric-save-name}.
projects / gnus / blobdiff