@c \input texinfo @c -*-texinfo-*-
@setfilename gnus
-@settitle Pterodactyl Gnus 0.87 Manual
+@settitle Pterodactyl Gnus 0.97 Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
@tex
@titlepage
-@title Pterodactyl Gnus 0.87 Manual
+@title Pterodactyl Gnus 0.97 Manual
@author by Lars Magne Ingebrigtsen
@page
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Pterodactyl Gnus 0.87.
+This manual corresponds to Pterodactyl Gnus 0.97.
@end ifinfo
Some news servers (Leafnode and old versions of INN, for instance) do
not support the @code{LIST ACTIVE group}. For these servers, @code{nil}
-is probably the most effficient value for this variable.
+is probably the most efficient value for this variable.
If this variable is @code{nil}, Gnus will ask for group info in total
lock-step, which isn't very fast. If it is @code{some} and you use an
Short (collapsed) group name. The @code{gnus-group-uncollapsed-levels}
variable says how many levels to leave at the end of the group name.
The default is 1---this will mean that group names like
-@samp{gnu.emacs.gnus} will be shortened to @samp{g.emacs.gnus}.
+@samp{gnu.emacs.gnus} will be shortened to @samp{g.e.gnus}.
@item m
@vindex gnus-new-mail-mark
@end table
-All the commands below obeys the process/prefix convention
+All the commands below obey the process/prefix convention
(@pxref{Process/Prefix}).
When given a symbolic prefix (@pxref{Symbolic Prefixes}), all these
(@code{gnus-topic-move-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T j
+@kindex T j (Topic)
+@findex gnus-topic-jump-to-topic
+Go to a topic (@code{gnus-topic-jump-to-topic}).
+
@item T c
@kindex T c (Topic)
@findex gnus-topic-copy-group
@item N
Article number.
@item S
-Subject string.
+Subject string. List identifiers stripped, @code{gnus-list-identifies}. @xref{Article Hiding}.
@item s
Subject if the article is the root of the thread or the previous article
had a different subject, @code{gnus-summary-same-subject} otherwise.
Some people would like the command that ticks an article (@kbd{!}) go to
the next article. Others would like it to go to the next unread
article. Yet others would like it to stay on the current article. And
-even though I haven't heard of anybody wanting it to go the the
+even though I haven't heard of anybody wanting it to go to the
previous (unread) article, I'm sure there are people that want that as
well.
While you can use these commands directly, most users would prefer
altering the summary mode keymap. For instance, if you would like the
-@kbd{!} command to go the the next article instead of the next unread
+@kbd{!} command to go to the next article instead of the next unread
article, you could say something like:
@lisp
This is a number that says how much each sub-thread should be indented.
The default is 4.
+@item gnus-sort-gathered-threads-function
+@vindex gnus-sort-gathered-threads-function
+Sometimes, particularly with mailing lists, the order in which mails
+arrive locally is not necessarily the same as the order in which they
+arrived on the mailing list. Consequently, when sorting sub-threads
+using the default @code{gnus-thread-sort-by-number}, responses can end
+up appearing before the article to which they are responding to. Setting
+this variable to an alternate value
+(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
+appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
+more logical sub-thread ordering in such instances.
+
@end table
@findex gnus-article-emphasize
@kindex W e (Summary)
People commonly add emphasis to words in news articles by writing things
-like @samp{_this_} or @samp{*this*}. Gnus can make this look nicer by
-running the article through the @kbd{W e}
+like @samp{_this_} or @samp{*this*} or @samp{/this/}. Gnus can make
+this look nicer by running the article through the @kbd{W e}
(@code{gnus-article-emphasize}) command.
@vindex gnus-emphasis-alist
("\\*\\(\\w+\\)\\*" 0 1 gnus-emphasis-bold)))
@end lisp
+@cindex slash
+@cindex asterisk
+@cindex underline
+@cindex /
+@cindex *
+
@vindex gnus-emphasis-underline
@vindex gnus-emphasis-bold
@vindex gnus-emphasis-italic
Hide signature (@code{gnus-article-hide-signature}). @xref{Article
Signature}.
+@item W W l
+@kindex W W l (Summary)
+@findex gnus-article-hide-list-identifiers
+@vindex gnus-list-identifiers
+Hide list identifiers specified in @code{gnus-list-identifiers}. Theese
+are strings some list servers add to the beginning of all @code{Subject}
+headers---for example, @samp{[zebra 4711]}.
+
+@table @code
+
+@item gnus-list-identifiers
+@vindex gnus-list-identifiers
+A regular expression that matches list identifiers to be removed from
+subject. This can also be a list of regular expressions.
+
+@end table
+
@item W W p
@kindex W W p (Summary)
@findex gnus-article-hide-pgp
You can give the command a numerical prefix to specify the width to use
when filling.
-@item W q
-@kindex W q (Summary)
-@findex gnus-article-fill-long-lines
+@item W Q
+@kindex W Q (Summary)
+@findex gnus-article-fill-long-lines
Fill long lines (@code{gnus-article-fill-long-lines}).
@item W C
@kindex W C (Summary)
-@findex gnus-article-capitalize-sentencse
+@findex gnus-article-capitalize-sentences
Capitalize the first word in each sentence
(@code{gnus-article-capitalize-sentences}).
@vindex gnus-signature-limit
@code{gnus-signature-limit} provides a limit to what is considered a
-signature.
+signature when displaying articles.
@enumerate
@item
Copy the @sc{mime} object to a fresh buffer and display this buffer
(@code{gnus-mime-copy-part}).
+@findex gnus-mime-view-part-as-type
+@item t (Article)
+View the @sc{mime} object as if it were a different @sc{mime} media type
+(@code{gnus-mime-view-part-as-type}.
+
@findex gnus-mime-pipe-part
@item | (Article)
Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
@code{gnus-treat-hide-headers}. Below is a list of variables that can
be set, but first we discuss the values these variables can have.
+Note: Some values, while valid, make little sense. Check the list below
+for sensible values.
+
@enumerate
@item
@code{nil}: Don't do this treatment.
The following treatment options are available. The easiest way to
customize this is to examine the @code{gnus-article-treat} customization
-group.
+group. Values in brackets are suggested sensible values. Others are possible
+but those listed are probably sufficient for most people.
@table @code
-@item gnus-treat-highlight-signature
-@item gnus-treat-buttonize
-@item gnus-treat-buttonize-head
-@item gnus-treat-emphasize
-@item gnus-treat-fill-article
-@item gnus-treat-strip-cr
-@item gnus-treat-hide-headers
-@item gnus-treat-hide-boring-headers
-@item gnus-treat-hide-signature
-@item gnus-treat-hide-citation
-@item gnus-treat-strip-pgp
-@item gnus-treat-strip-pem
-@item gnus-treat-highlight-headers
-@item gnus-treat-highlight-citation
-@item gnus-treat-highlight-signature
-@item gnus-treat-date-ut
-@item gnus-treat-date-local
-@item gnus-treat-date-lapsed
-@item gnus-treat-date-original
-@item gnus-treat-strip-headers-in-body
-@item gnus-treat-strip-trailing-blank-lines
-@item gnus-treat-strip-leading-blank-lines
-@item gnus-treat-strip-multiple-blank-lines
-@item gnus-treat-strip-blank-lines
-@item gnus-treat-overstrike
-@item gnus-treat-display-xface
-@item gnus-treat-display-smileys
-@item gnus-treat-display-picons
-@item gnus-treat-capitalize-sentences
-@item gnus-treat-fill-long-lines
+@item gnus-treat-highlight-signature (t, last)
+@item gnus-treat-buttonize (t, integer)
+@item gnus-treat-buttonize-head (head)
+@item gnus-treat-emphasize (t, head, integer)
+@item gnus-treat-fill-article (t, integer)
+@item gnus-treat-strip-cr (t, integer)
+@item gnus-treat-hide-headers (head)
+@item gnus-treat-hide-boring-headers (head)
+@item gnus-treat-hide-signature (t, last)
+@item gnus-treat-hide-citation (t, integer)
+@item gnus-treat-strip-pgp (t, last, integer)
+@item gnus-treat-strip-pem (t, last, integer)
+@item gnus-treat-highlight-headers (head)
+@item gnus-treat-highlight-citation (t, integer)
+@item gnus-treat-highlight-signature (t, last, integer)
+@item gnus-treat-date-ut (head)
+@item gnus-treat-date-local (head)
+@item gnus-treat-date-lapsed (head)
+@item gnus-treat-date-original (head)
+@item gnus-treat-strip-headers-in-body (t, integer)
+@item gnus-treat-strip-trailing-blank-lines (t, last, integer)
+@item gnus-treat-strip-leading-blank-lines (t, integer)
+@item gnus-treat-strip-multiple-blank-lines (t, integer)
+@item gnus-treat-overstrike (t, integer)
+@item gnus-treat-display-xface (head)
+@item gnus-treat-display-smileys (t, integer)
+@item gnus-treat-display-picons (head)
+@item gnus-treat-capitalize-sentences (t, integer)
+@item gnus-treat-fill-long-lines (t, integer)
@item gnus-treat-play-sounds
@item gnus-treat-translate
@end table
@code{organization}, @code{address}, @code{name} or @code{body}. The
attribute name can also be a string. In that case, this will be used as
a header name, and the value will be inserted in the headers of the
-article.
+article. If the attribute name is @code{eval}, the form is evaluated,
+and the result is thrown away.
-The attribute value can be a string (used verbatim), a function (the
-return value will be used), a variable (its value will be used) or a
-list (it will be @code{eval}ed and the return value will be used).
+The attribute value can be a string (used verbatim), a function with
+zero arguments (the return value will be used), a variable (its value
+will be used) or a list (it will be @code{eval}ed and the return value
+will be used). The functions and sexps are called/@code{eval}ed in the
+message buffer that is being set up. The headers of the current article
+are available through the @code{message-reply-headers} variable.
If you wish to check whether the message you are about to compose is
meant to be a news article or a mail message, you can check the values
-of the two dynamically bound variables @code{message-this-is-news} and
-@code{message-this-is-mail}.
+of the @code{message-news-p} and @code{message-mail-p} functions.
-@vindex message-this-is-mail
-@vindex message-this-is-news
+@findex message-mail-p
+@findex message-news-p
So here's a new example:
(signature my-funny-signature-randomizer))
((equal (system-name) "gnarly")
(signature my-quote-randomizer))
- (message-this-is-news
+ ((message-news-p)
(signature my-news-signature))
- (posting-from-work-p
+ ((posting-from-work-p)
(signature-file "~/.work-signature")
(address "user@@bar.foo")
(body "You are fired.\n\nSincerely, your boss.")
course.
@menu
+* Mail in a Newsreader:: Important introductory notes.
* Getting Started Reading Mail:: A simple cookbook example.
* Splitting Mail:: How to create mail groups.
* Mail Sources:: How to tell Gnus where to get mail from.
* Mail Backend Variables:: Variables for customizing mail handling.
* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
* Incorporating Old Mail:: What about the old mail you have?
* Expiring Mail:: Getting rid of unwanted mail.
* Washing Mail:: Removing gruft from the mail you get.
@end menu
+@node Mail in a Newsreader
+@subsection Mail in a Newsreader
+
+If you are used to traditional mail readers, but have decided to switch
+to reading mail with Gnus, you may find yourself experiencing something
+of a culture shock.
+
+Gnus does not behave like traditional mail readers. If you want to make
+it behave that way, you can, but it's an uphill battle.
+
+Gnus, by default, handles all its groups using the same approach. This
+approach is very newsreaderly---you enter a group, see the new/unread
+messages, and when you read the messages, they get marked as read, and
+you don't see them any more. (Unless you explicitly ask for them.)
+
+In particular, you do not do anything explicitly to delete messages.
+
+Does this mean that all the messages that have been marked as read are
+deleted? How awful!
+
+But, no, it means that old messages are @dfn{expired} according to some
+scheme or other. For news messages, the expire process is controlled by
+the news administrator; for mail, the expire process is controlled by
+you. The expire process for mail is covered in depth in @pxref{Expiring
+Mail}.
+
+What many Gnus users find, after using it a while for both news and
+mail, is that the transport mechanism has very little to do with how
+they want to treat a message.
+
+Many people subscribe to several mailing lists. These are transported
+via SMTP, and are therefore mail. But we might go for weeks without
+answering, or even reading these messages very carefully. We may not
+need to save them because if we should need to read one again, they are
+archived somewhere else.
+
+Some people have local news groups which have only a handful of readers.
+These are transported via NNTP, and are therefore news. But we may need
+to read and answer a large fraction of the messages very carefully in
+order to do our work. And there may not be an archive, so we may need
+to save the interesting messages the same way we would personal mail.
+
+The important distinction turns out to be not the transport mechanism,
+but other factors such as how interested we are in the subject matter,
+or how easy it is to retrieve the message if we need to read it again.
+
+Gnus provides many options for sorting mail into ``groups'' which behave
+like newsgroups, and for treating each group (whether mail or news)
+differently.
+
+Some users never get comfortable using the Gnus (ahem) paradigm and wish
+that Gnus should grow up and be a male, er, mail reader. It is possible
+to whip Gnus into a more mailreaderly being, but, as said before, it's
+not easy. People who prefer proper mail readers should try @sc{vm}
+instead, which is an excellent, and proper, mail reader.
+
+I don't mean to scare anybody off, but I want to make it clear that you
+may be required to learn a new way of thinking about messages. After
+you've been subjected to The Gnus Way, you will come to love it. I can
+guarantee it. (At least the guy who sold me the Emacs Subliminal
+Brain-Washing Functions that I've put into Gnus did guarantee it. You
+Will Be Assimilated. You Love Gnus. You Love The Gnus Mail Way.
+You Do.)
+
+
@node Getting Started Reading Mail
@subsection Getting Started Reading Mail
@cindex mail spool
@cindex mail source
-You tell Gnus how to fetch mail by creating a @dfn{mail source
-specifier}.
+You tell Gnus how to fetch mail by setting @code{mail-sources}
+(@pxref{Fetching Mail}) to a @dfn{mail source specifier}.
Here's an example:
variables.
@table @code
-@item mail-source-movemail-program
-@vindex mail-source-movemail-program
-A command to be executed to move mail from the inbox. The default is
-@samp{movemail}.
-
-This can also be a function. In that case, the function will be
-called with two parameters -- the name of the INBOX file, and the file
-to be moved to.
-
-@item mail-source-movemail-args
-@vindex mail-source-movemail-args
-Extra arguments to give to the command described above.
-
@item mail-source-crash-box
@vindex mail-source-crash-box
File where mail will be stored while processing it. The default is
;; Other mailing lists...
(any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
(any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
+ ;; Both lists below have the same suffix, so prevent
+ ;; cross-posting to mkpkg.list of messages posted only to
+ ;; the bugs- list, but allow cross-posting when the
+ ;; message was really cross-posted.
+ (any "bugs-mypackage@@somewhere" "mypkg.bugs")
+ (any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
;; People...
(any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
;; Unmatched mail goes to the catch all group.
examples.
@item
-@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
-which is a string, then store the message as specified by SPLIT, if
-header FIELD (a regexp) contains VALUE (also a regexp).
+@var{(FIELD VALUE [- RESTRICT [- RESTRICT [...]]] SPLIT)}: If the split
+is a list, the first element of which is a string, then store the
+message as specified by SPLIT, if header FIELD (a regexp) contains VALUE
+(also a regexp). If RESTRICT (yet another regexp) matches some string
+after FIELD and before the end of the matched VALUE, the SPLIT is
+ignored. If none of the RESTRICT clauses match, SPLIT is processed.
@item
@var{(| SPLIT...)}: If the split is a list, and the first element is
groupings 1 through 9.
+@node Group Mail Splitting
+@subsection Group Mail Splitting
+@cindex mail splitting
+@cindex group mail splitting
+
+@findex gnus-group-split
+If you subscribe to dozens of mailing lists but you don't want to
+maintain mail splitting rules manually, group mail splitting is for you.
+You just have to set @var{to-list} and/or @var{to-address} in group
+parameters or group customization and set @code{nnmail-split-methods} to
+@code{gnus-group-split}. This splitting function will scan all groups
+for those parameters and split mail accordingly, i.e., messages posted
+from or to the addresses specified in the parameters @var{to-list} or
+@var{to-address} of a mail group will be stored in that group.
+
+Sometimes, mailing lists have multiple addresses, and you may want mail
+splitting to recognize them all: just set the @var{extra-aliases} group
+parameter to the list of additional addresses and it's done. If you'd
+rather use a regular expression, set @var{split-regexp}.
+
+All these parameters in a group will be used to create an
+@code{nnmail-split-fancy} split, in which the @var{FIELD} is @samp{any},
+the @var{VALUE} is a single regular expression that matches
+@var{to-list}, @var{to-address}, all of @var{extra-aliases} and all
+matches of @var{split-regexp}, and the @var{SPLIT} is the name of the
+group. @var{RESTRICT}s are also supported: just set the
+@var{split-exclude} parameter to a list of regular expressions.
+
+If you can't get the right split to be generated using all these
+parameters, or you just need something fancier, you can set the
+parameter @var{split-spec} to an @code{nnmail-split-fancy} split. In
+this case, all other aforementioned parameters will be ignored by
+@code{gnus-group-split}. In particular, @var{split-spec} may be set to
+@code{nil}, in which case the group will be ignored by
+@code{gnus-group-split}.
+
+@vindex gnus-group-split-default-catch-all-group
+@code{gnus-group-split} will do cross-posting on all groups that match,
+by defining a single @code{&} fancy split containing one split for each
+group. If a message doesn't match any split, it will be stored in the
+group named in @code{gnus-group-split-default-catch-all-group}, unless
+some group has @var{split-spec} set to @code{catch-all}, in which case
+that group is used as the catch-all group. Note that, in this case,
+there's no cross-posting, as a @code{|} fancy split encloses the
+@code{&} split and the catch-all group.
+
+It's time for an example. Assume the following group parameters have
+been defined:
+
+@example
+nnml:mail.bar:
+((to-address . "bar@@femail.com")
+ (split-regexp . ".*@@femail\\.com"))
+nnml:mail.foo:
+((to-list . "foo@@nowhere.gov")
+ (extra-aliases "foo@@localhost" "foo-redist@@home")
+ (split-exclude "bugs-foo" "rambling-foo")
+ (admin-address . "foo-request@@nowhere.gov"))
+nnml:mail.others:
+((split-spec . catch-all))
+@end example
+
+Setting @code{nnmail-split-methods} to @code{gnus-group-split} will
+behave as if @code{nnmail-split-fancy} had been selected and variable
+@code{nnmail-split-fancy} had been set as follows:
+
+@lisp
+(| (& (any "\\(bar@@femail\\.com\\|.*@@femail\\.com\\)" "mail.bar")
+ (any "\\(foo@@nowhere\\.gov\\|foo@@localhost\\|foo-redist@@home\\)"
+ - "bugs-foo" - "rambling-foo" "mail.foo"))
+ "mail.others")
+@end lisp
+
+@findex gnus-group-split-fancy
+If you'd rather not use group splitting for all your mail groups, you
+may use it for only some of them, by using @code{nnmail-split-fancy}
+splits like this:
+
+@lisp
+(: gnus-mlsplt-fancy GROUPS NO-CROSSPOST CATCH-ALL)
+@end lisp
+
+@var{GROUPS} may be a regular expression or a list of group names whose
+parameters will be scanned to generate the output split.
+@var{NO-CROSSPOST} can be used to disable cross-posting; in this case, a
+single @code{|} split will be output. @var{CATCH-ALL} may be the name
+of a group to be used as the default catch-all group. If
+@var{CATCH-ALL} is @code{nil}, or if @var{SPLIT-REGEXP} matches the
+empty string in any selected group, no catch-all split will be issued.
+Otherwise, if some group has @var{SPLIT-SPEC} set to @code{catch-all},
+this group will override the value of the @var{CATCH-ALL} argument.
+
+@findex gnus-group-split-setup
+Unfortunately, scanning all groups and their parameters can be quite
+slow, especially considering that it has to be done for every message.
+But don't despair! The function @code{gnus-group-split-setup} can be
+used to select @code{gnus-group-split} in a much more efficient way. It
+sets @code{nnmail-split-methods} to @code{nnmail-split-fancy} and sets
+@code{nnmail-split-fancy} to the split produced by
+@code{gnus-group-split-fancy}. Thus, the group parameters are only
+scanned once, no matter how many messages are split.
+
+@findex gnus-group-split-update
+However, if you change group parameters, you have to update
+@code{nnmail-split-fancy} manually. You can do it by running
+@code{gnus-group-split-update}. If you'd rather have it updated
+automatically, just tell @code{gnus-group-split-setup} to do it for
+you. For example, add to your @file{.gnus}:
+
+@lisp
+(gnus-group-split-setup AUTO-UPDATE CATCH-ALL)
+@end lisp
+
+If @var{AUTO-UPDATE} is non-@code{nil}, @code{gnus-group-split-update}
+will be added to @code{nnmail-pre-get-new-mail-hook}, so you won't ever
+have to worry about updating @code{nnmail-split-fancy} again. If you
+don't omit @var{CATCH-ALL} (it's optional),
+@code{gnus-group-split-default-catch-all-group} will be set to its
+value.
+
+@vindex gnus-group-split-updated-hook
+Because you may want to change @code{nnmail-split-fancy} after it is set
+by @code{gnus-group-split-update}, this function will run
+@code{gnus-group-split-updated-hook} just before finishing.
+
@node Incorporating Old Mail
@subsection Incorporating Old Mail
'("(idm)" "nagnagnag"))
@end lisp
+This can also be done non-destructively with
+@code{gnus-list-identifiers}, @xref{Article Hiding}.
+
@item nnmail-remove-tabs
@findex nnmail-remove-tabs
Translate all @samp{TAB} characters into @samp{SPACE} characters.
@item nnfolder
-Basically the effetc of @code{nnfolder} is @code{nnmbox} (the first
+Basically the effect of @code{nnfolder} is @code{nnmbox} (the first
method described above) on a per-group basis. That is, @code{nnmbox}
itself puts *all* one's mail in one file; @code{nnfolder} provides a
little bit of optimization to this so that each of one's mail groups has
@kindex J S (Agent Group)
@findex gnus-group-send-drafts
Send all sendable messages in the draft group
-(@code{gnus-agent-fetch-session}). @xref{Drafts}.
+(@code{gnus-group-send-drafts}). @xref{Drafts}.
@item J a
@kindex J a (Agent Group)
@vindex gnus-score-uncacheable-files
@cindex score cache
All score files are normally cached to avoid excessive re-loading of
-score files. However, if this might make you Emacs grow big and
+score files. However, if this might make your Emacs grow big and
bloated, so this regexp can be used to weed out score files unlikely to be needed again. It would be a bad idea to deny caching of
@file{all.SCORE}, while it might be a good idea to not cache
@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
the matches.
@item Marking as read
-You will probably want to mark articles that has a score below a certain
+You will probably want to mark articles that have scores below a certain
number as read. This is most easily achieved by putting the following
in your @file{all.SCORE} file:
@lisp
Matt Armstrong,
Marc Auslander,
Miles Bader,
+Alexei V. Barantsev,
Frank Bennett,
Robert Bihlmeyer,
Chris Bone,
Mark Borges,
Mark Boyns,
Lance A. Brown,
+Rob Browning,
Kees de Bruin,
Martin Buchholz,
Joe Buehler,
David Charlap,
Dan Christensen,
Kevin Christian,
+Jae-you Chung, @c ?
+James H. Cloos, Jr.,
+Laura Conrad,
Michael R. Cook,
Glenn Coombs,
+Andrew J. Cosgriff,
+Neil Crellin,
Frank D. Cringle,
Geoffrey T. Dairiki,
Andre Deparade,
Michael Welsh Duggan,
Dave Edmondson,
Paul Eggert,
+Mark W. Eichin,
Karl Eichwalder,
Enami Tsugutomo, @c Enami
Michael Ernst,
Sam Falkner,
Nelson Jose dos Santos Ferreira,
Sigbjorn Finne,
+Sven Fischer,
Paul Fisher,
Decklin Foster,
Gary D. Foster,
Yoshiki Hayashi, @c ?
P. E. Jareth Hein,
Hisashige Kenji, @c Hisashige
+Scott Hofmann,
Marc Horowitz,
Gunnar Horrigmo,
Richard Hoskins,
Brad Howes,
+Miguel de Icaza,
François Felix Ingrand,
+Tatsuya Ichikawa, @c ?
Ishikawa Ichiro, @c Ishikawa
Lee Iverson,
Iwamuro Motonori, @c Iwamuro
Rajappa Iyer,
Andreas Jaeger,
+Adam P. Jenkins,
Randell Jesup,
Fred Johansen,
Gareth Jones,
Simon Josefsson,
Greg Klanderman,
Karl Kleinpaste,
+Michael Klingbeil,
Peter Skov Knudsen,
Shuhei Kobayashi, @c Kobayashi
+Petr Konecny,
Koseki Yoshinori, @c Koseki
Thor Kristoffersen,
Jens Lautenbacher,
Ken Olstad,
Masaharu Onishi, @c Onishi
Hideki Ono, @c Ono
+Ettore Perazzoli,
William Perry,
Stephen Peters,
Jens-Ulrik Holger Petersen,
Richard Stallman,
Greg Stark,
Sam Steingold,
+Paul Stevenson,
Jonas Steverud,
Paul Stodghill,
+Kiyokazu Suto, @c Suto
Kurt Swanson,
Samuel Tardieu,
Teddy,
Chuck Thompson,
+Tozawa Akihiko, @c Tozawa
Philippe Troin,
James Troup,
Trung Tran-Duc,
+Jack Twilley,
Aaron M. Ucko,
Aki Vehtari,
Didier Verna,
+Vladimir Volovich,
Jan Vroonhof,
Stefan Waldherr,
Pete Ware,
are in the cache.
@item
AUTHINFO GENERIC
-@item
- support qmail maildir spools
@item
`run-with-idle-timer' in gnus-demon.
@item
> bar 1
@end example
+@item
+Allow "orphan" scores in the Agent scoring.
+
+@item
+@example
+ - Edit article's summary line.
+ - End edit
+ - Sort lines in buffer by subject
+
+ --> the old subject line appears in Summary buffer, not the one that was
+ just changed to.
+@end example
+
@item
Solve the halting problem.
projects / gnus / blobdiff