;;; pop3.el --- Post Office Protocol (RFC 1460) interface
;; Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-;; 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+;; 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
;; Author: Richard L. Pieri <ratinox@peorth.gweep.net>
;; Maintainer: FSF
;; This file is part of GNU Emacs.
-;; GNU Emacs is free software; you can redistribute it and/or modify
+;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 3, or (at your option)
-;; any later version.
+;; the Free Software Foundation, either version 3 of the License, or
+;; (at your option) any later version.
;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-;; Boston, MA 02110-1301, USA.
+;; along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
;;; Commentary:
:type 'boolean
:group 'pop3)
+(defcustom pop3-display-message-size-flag t
+ "*If non-nil, display the size of the message that is being fetched."
+ :version "22.1" ;; Oort Gnus
+ :type 'boolean
+ :group 'pop3)
+
(defvar pop3-timestamp nil
"Timestamp returned when initially connected to the POP server.
Used for APOP authentication.")
(defvar pop3-read-point nil)
(defvar pop3-debug nil)
-;; Borrowed from nnheader-accept-process-output in nnheader.el.
-(defvar pop3-read-timeout
- (if (string-match "windows-nt\\|os/2\\|emx\\|cygwin"
- (symbol-name system-type))
- ;; http://thread.gmane.org/v9655t3pjo.fsf@marauder.physik.uni-ulm.de
- ;;
- ;; IIRC, values lower than 1.0 didn't/don't work on Windows/DOS.
- ;;
- ;; There should probably be a runtime test to determine the timing
- ;; resolution, or a primitive to report it. I don't know off-hand
- ;; what's possible. Perhaps better, maybe the Windows/DOS primitive
- ;; could round up non-zero timeouts to a minimum of 1.0?
- 1.0
- 0.1)
- "How long pop3 should wait between checking for the end of output.
+;; Borrowed from nnheader-accept-process-output in nnheader.el. See the
+;; comments there for explanations about the values.
+
+(eval-and-compile
+ (if (and (fboundp 'nnheader-accept-process-output)
+ (boundp 'nnheader-read-timeout))
+ (defalias 'pop3-accept-process-output 'nnheader-accept-process-output)
+ ;; Borrowed from `nnheader.el':
+ (defvar pop3-read-timeout
+ (if (string-match "windows-nt\\|os/2\\|emx\\|cygwin"
+ (symbol-name system-type))
+ 1.0
+ 0.01)
+ "How long pop3 should wait between checking for the end of output.
Shorter values mean quicker response, but are more CPU intensive.")
-
-;; Borrowed from nnheader-accept-process-output in nnheader.el.
-(defun pop3-accept-process-output (process)
- (accept-process-output
- process
- (truncate pop3-read-timeout)
- (truncate (* (- pop3-read-timeout
- (truncate pop3-read-timeout))
- 1000))))
+ (defun pop3-accept-process-output (process)
+ (accept-process-output
+ process
+ (truncate pop3-read-timeout)
+ (truncate (* (- pop3-read-timeout
+ (truncate pop3-read-timeout))
+ 1000))))))
(defun pop3-movemail (&optional crashbox)
"Transfer contents of a maildrop to the specified CRASHBOX."
(crashbuf (get-buffer-create " *pop3-retr*"))
(n 1)
message-count
+ message-sizes
(pop3-password pop3-password))
;; for debugging only
(if pop3-debug (switch-to-buffer (process-buffer process)))
(pop3-pass process))
(t (error "Invalid POP3 authentication scheme")))
(setq message-count (car (pop3-stat process)))
+ (when (and pop3-display-message-size-flag
+ (> message-count 0))
+ (setq message-sizes (pop3-list process)))
(unwind-protect
(while (<= n message-count)
- (message "Retrieving message %d of %d from %s..."
- n message-count pop3-mailhost)
+ (if pop3-display-message-size-flag
+ (message "Retrieving message %d of %d from %s... (%.1fk)"
+ n message-count pop3-mailhost
+ (/ (cdr (assoc n message-sizes))
+ 1024.0))
+ (message "Retrieving message %d of %d from %s..."
+ n message-count pop3-mailhost))
(pop3-retr process n crashbuf)
(save-excursion
(set-buffer crashbuf)
(unless pop3-leave-mail-on-server
(pop3-dele process n))
(setq n (+ 1 n))
- (if pop3-debug (sit-for 1) (sit-for 0.1))) ; why?
+ (pop3-accept-process-output process))
(when (and pop3-leave-mail-on-server
(> n 1))
(message "pop3.el doesn't support UIDL. Setting `pop3-leave-mail-on-server'
to turn on TLS security after opening the stream). However, if
this is nil, `ssl' is assumed for connexions to port
995 (pop3s)."
- :version "23.0" ;; No Gnus
+ :version "23.1" ;; No Gnus
:group 'pop3
:type '(choice (const :tag "Plain" nil)
(const :tag "SSL/TLS" ssl)
(setq match-end (point))
(goto-char pop3-read-point)
(if (looking-at "-ERR")
- (error (buffer-substring (point) (- match-end 2)))
+ (error "%s" (buffer-substring (point) (- match-end 2)))
(if (not (looking-at "+OK"))
(progn (setq pop3-read-point match-end) nil)
(setq pop3-read-point match-end)
))
(defun pop3-list (process &optional msg)
- "Scan listing of available messages.
-This function currently does nothing.")
+ "If MSG is nil, return an alist of (MESSAGE-ID . SIZE) pairs.
+Otherwise, return the size of the message-id MSG"
+ (pop3-send-command process (if msg
+ (format "LIST %d" msg)
+ "LIST"))
+ (let ((response (pop3-read-response process t)))
+ (if msg
+ (string-to-number (nth 2 (split-string response " ")))
+ (let ((start pop3-read-point) end)
+ (save-excursion
+ (set-buffer (process-buffer process))
+ (while (not (re-search-forward "^\\.\r\n" nil t))
+ (pop3-accept-process-output process)
+ (goto-char start))
+ (setq pop3-read-point (point-marker))
+ (goto-char (match-beginning 0))
+ (setq end (point-marker))
+ (mapcar #'(lambda (s) (let ((split (split-string s " ")))
+ (cons (string-to-number (nth 0 split))
+ (string-to-number (nth 1 split)))))
+ (delete "" (split-string (buffer-substring start end)
+ "\r\n"))))))))
(defun pop3-retr (process msg crashbuf)
"Retrieve message-id MSG to buffer CRASHBUF."
(provide 'pop3)
-;;; arch-tag: 2facc142-1d74-498e-82af-4659b64cac12
+;; arch-tag: 2facc142-1d74-498e-82af-4659b64cac12
;;; pop3.el ends here