--- /dev/null
+\documentclass{article}
+
+% Previously we had five input LaTeX files (booklet.tex bk-lt.tex bk-a4.tex
+% refcard.tex gnusref.tex) and two logo files (gnuslogo-refcard.eps and
+% gnuslogo-booklet.eps).
+%
+% From this LaTeX file (gnus-refcard.tex) plus a single logo (gnus-logo.eps),
+% we can generate the refcard and the booklet version. This simplifies to
+% distribute the refcard with Emacs. Appropriate Makefile rules were added in
+% gnus/texi/Makefile.
+
+% For Emacs, we may use the following commands (w/o) using Gnus' Makefile:
+%
+% latex gnus-refcard.tex &&
+% dvips -t letter -f gnus-refcard.dvi > gnus-refcard.ps
+%
+% latex '\def\booklettrue{}\def\letterpapertrue{}\input{gnus-refcard}' &&
+% mv gnus-refcard.dvi gnus-booklet.dvi &&
+% dvips -t letter -f gnus-booklet.dvi > gnus-booklet.ps
+
+\usepackage{ifthen}
+\ifthenelse{\isundefined{\booklettrue}}{
+ \typeout{Creating reference card...}
+}{
+ \typeout{Creating reference booklet...}}
+
+\usepackage{supertabular}
+
+\newlength{\logowidth} \setlength{\logowidth} {6.861in}
+\newlength{\logoheight} \setlength{\logoheight}{7.013in}
+
+\usepackage{graphicx}
+
+\usepackage{geometry}
+
+\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ % Reference Card
+
+ \def\Guide{Card}\def\guide{card}
+ \def\logoscale{0.25}
+
+ % Page setup for the refcard:
+
+ % \setlength{\textwidth}{7.26in} \setlength{\textheight}{10in}
+ % \setlength{\topmargin}{-1.0in}
+ % % the same settings work for A4, although there is a bit of space at the
+ % % top and bottom of the page.
+ % \setlength{\oddsidemargin}{-0.5in} \setlength{\evensidemargin}{-0.5in}
+
+ \ifthenelse{\isundefined{\letterpapertrue}}{
+ \geometry{a4paper,hmargin=10mm,tmargin=10mm,bmargin=35mm}
+ }{
+ \geometry{hmargin=20mm,tmargin=10mm,bmargin=12mm}
+ }
+
+}{ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ % Reference Booklet
+
+ \def\Guide{Booklet}\def\guide{booklet}
+ \def\logoscale{0.5}% FIXME: too large for 2up printing? --rsteib
+
+ \ifthenelse{\isundefined{\letterpapertrue}}{
+ \geometry{a5paper,hmargin=10mm,tmargin=10mm,bmargin=4mm}
+ }{
+ \geometry{a5paper,hmargin=20mm,tmargin=10mm,bmargin=4mm}
+ }
+
+ \def\sec{\section}
+ \def\subsec{\subsection}
+ \def\subsubsec{\subsubsection}
+ \def\blankpage{\vspace*{\fill}\par
+ %\centerline{(This page intentionally left blank.)}
+ \par\vspace*{\fill}\pagebreak}
+}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
+%% include file for the Gnus refcard and booklet
+
+\def\progver{5.11} % program version
+% \def\refver{5.10-2} % refcard version (not used)
+\def\date{April, 2006}
+\def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$}
+
+%%
+\newlength{\keycolwidth}
+\newenvironment{keys}[1]% #1 is the widest key
+{\nopagebreak%\noindent%
+ \settowidth{\keycolwidth}{#1}%
+ \addtolength{\keycolwidth}{\tabcolsep}%
+ \addtolength{\keycolwidth}{-\columnwidth}%
+ \begin{supertabular}{@{}l@{\hspace{\tabcolsep}}p{-\keycolwidth}@{}}}%
+ {\end{supertabular}\\}
+
+%% uncomment the first definition if you do not want pagebreaks in maps
+%%\newcommand{\esamepage}{\samepage}
+\newcommand{\esamepage}{}
+
+\newcommand*{\B}[1]{{\bf#1})} % bold l)etter
+
+\newcommand{\Title}{%
+ \begin{center}
+ {\bf\LARGE Gnus \progver\ Reference \Guide\\}
+ %{\normalsize \Guide\ version \refver}
+ \end{center}
+ }
+
+% \newcommand*{\LogoOLD}[1]{\centerline{%
+% \makebox[\logoscale\logowidth][l]{\vbox to \logoscale\logoheight
+% {\vfill\epsfig{figure=gnuslogo-#1}}\vspace{-\baselineskip}}}}
+
+\newcommand*{\Logo}[1]{\centerline{%
+ \includegraphics[width=\logoscale\logowidth]{gnus-logo}}}
+
+%% Contributions by:
+%% 1995 Vladimir Alexiev <vladimir@cs.ualberta.ca>
+%% 2000 Felix Natter <fnatter@gmx.net>
+%% 2001, 2002, 2003, 2005 \author.
+%% Original Gnus manual 1994 Lars Magne Ingebrigtsen
+%% Some material from Emacs Help Bindings feature (C-h b).
+%% Gnus logo by Luis Fernandes.
+\newcommand{\Copyright}{%
+ \begin{center}
+ Copyright \copyright\ 1995, 2000, 2002--2016 Free Software Foundation, Inc.\\*
+ \end{center}
+
+ Permission is granted to make and distribute copies of this reference
+ \guide{} provided the copyright notice and this permission are preserved on
+ all copies. Please send corrections, additions and suggestions to the
+ current maintainer's email address. \Guide{} last edited on \date.
+ }
+
+\newcommand{\Notes}{%
+ \subsection*{Notes}
+ {\esamepage
+ Gnus is complex. Currently it has some 876 interactive (user-callable)
+ functions. Of these 618 are in the two major modes (Group and
+ Summary/Article). Many of these functions have more than one binding, some
+ have 3 or even 4 bindings. The total number of keybindings is 677. So in
+ order to save 40\% space, every function is listed only once on this
+ \guide, under the ``more logical'' binding. Alternative bindings are given
+ in parentheses in the beginning of the description.
+
+ Many Gnus commands are affected by the numeric prefix. Normally you enter a
+ prefix by holding the Meta key and typing a number, but in most Gnus modes
+ you don't need to use Meta since the digits are not self-inserting. The
+ prefixed behavior of commands is given in [brackets]. Often the prefix is
+ used to specify:
+
+ \quad [distance] How many objects to move the point over.
+
+ \quad [scope] How many objects to operate on (including current one).
+
+ \quad [p/p] The ``Process/Prefix Convention'': If a prefix is given then it
+ determines how many objects to operate on. Else if there are some objects
+ marked with the process mark \#, these are operated on. Else only the
+ current object is affected.
+
+ \quad [level] A group subscribedness level. Only groups with a lower or
+ equal level will be affected by the operation. If no prefix is given,
+ `gnus-group-default-list-level' is used. If
+ `gnus-group-use-permanent-levels', then a prefix to the `g' and `l'
+ commands will also set the default level.
+
+ \quad [score] An article score. If no prefix is given,
+ `gnus-summary-default-score' is used. \\*[\baselineskip]
+ % some keys
+ Gnus startup-commands:\\*
+ \begin{keys}{M-x gnus-unplugged}
+ M-x gnus & start Gnus. \\
+ M-x gnus-no-server & start Gnus without connecting to server
+ (i.e. to read mail). \\
+ \end{keys}
+ Additionally, there are two commands \texttt{gnus-plugged} and
+ \texttt{gnus-unplugged}, which are only used if you want to download
+ news and/or read previously downloaded news offline (see C-c C-i g Gnus
+ Unplugged RET). Note: \texttt{gnus-no-server} ignores the stuff in
+ \texttt{gnus-agent-directory}, and thus does not allow you to use Gnus
+ Unplugged.\\
+ %
+ \begin{keys}{C-c C-i}
+ C-c C-i & Go to the Gnus online {\bf info}.\\
+ C-c C-b & Send a Gnus {\bf bug} report.\\
+ \end{keys}
+ }}
+
+\newcommand{\GroupLevels}{%
+ The table below assumes that you use the default Gnus levels.
+ Fill your user-specific levels in the blank cells.\\[1\baselineskip]
+ \begin{tabular}{|c|l|l|}
+ \hline
+ Level & Groups & Status \\
+ \hline
+ 1 & draft/mail groups & \\
+ 2 & mail groups & \\
+ 3 & & subscribed \\
+ 4 & & \\
+ 5 & default list level & \\
+ \hline
+ 6 & & unsubscribed \\
+ 7 & & \\
+ \hline
+ 8 & & zombies \\
+ \hline
+ 9 & & killed \\
+ \hline
+ \end{tabular}}
+
+\newcommand{\MarkCharacters}{%
+ {\esamepage If a command directly sets a mark, it is shown in parentheses.\\*
+ \newlength{\markcolwidth}
+ \settowidth{\markcolwidth}{` '}% widest character
+ \addtolength{\markcolwidth}{4\tabcolsep}
+ \addtolength{\markcolwidth}{-\columnwidth}
+ \newlength{\markdblcolwidth}
+ \setlength{\markdblcolwidth}{\columnwidth}
+ \addtolength{\markdblcolwidth}{-2\tabcolsep}
+ \begin{tabular}{|c|p{-\markcolwidth}|}
+ \hline
+ \multicolumn{2}{|p{\markdblcolwidth}|}{{\bf ``Read'' Marks.}
+ All these marks appear in the first column of the summary line, and so
+ are mutually exclusive.}\\
+ \hline
+ ` ' & (M-u, M SPC, M c) Not read.\\
+ ! & (!, M !, M t) Ticked (interesting).\\
+ ? & (?, M ?) Dormant (only followups are interesting).\\
+ E & (E, M e, M x) {\bf Expirable}. Only has effect in mail groups.\\
+ G & (C, B DEL) Canceled article (or deleted in mailgroups).\\
+ \$ & (M-d, M s x, S x). Marked as spam.\\
+ \hline\hline
+ \multicolumn{2}{|p{\markdblcolwidth}|}
+ {The marks below mean that the article
+ is read (killed, uninteresting), and have more or less the same effect.
+ Some commands however explicitly differentiate between them (e.g.\ M
+ M-C-r, adaptive scoring).}\\
+ \hline
+ r & (d, M d, M r) Deleted (marked as {\bf read}).\\
+ C & (M C; M C-c; M H; c, Z c; Z n; Z C) Killed by {\bf catch-up}.\\
+ F & SOUPed article. See the manual.\\
+ O & {\bf Old} (read in a previous session).\\
+ K & (k, M k; C-k, M K) {\bf Killed}.\\
+ M & Article marked as read by duplicate suppression.\\
+ Q & Article is part of a sparse thread (see ``Threading''
+ in manual).\\
+ R & {\bf Read} (viewed in actuality).\\
+ X & Killed by a kill file.\\
+ Y & Killed due to low score.\\
+ \hline\multicolumn{2}{c}{\vspace{1ex}}\\\hline
+ \multicolumn{2}{|p{\markdblcolwidth}|}
+ {{\bf Marks not affecting visibility}}\\
+ \hline
+ \# & (\#, M \#, M P p) Processable (affected by next operation).
+ [2]\\
+ A & {\bf Answered} (followed-up or replied). [2]\\
+ F & Forwarded. [2]\\
+ $\ast$ & Cached. [2]\\
+ S & Saved. [2]\\
+ N & Recently arrived. [2]\\
+ . & Unseen. [2]\\
+ + & Over default score. [3]\\
+ $-$ & Under default score. [3]\\
+ $=$ & Has children (thread underneath it). Add `\%e' to
+ `gnus-summary-line-format'. [3]\\
+ \hline
+ \end{tabular}
+ }}
+
+\newcommand{\GroupModeGeneral}{%
+ \begin{keys}{C-c M-C-x}
+ RET & (=) Enter this group. [Prefix: how many (read) articles to fetch.
+ Positive: newest articles, negative: oldest ones; non-numerical:
+ view all articles, not just unread]\\
+ M-RET & Enter group quickly.\\
+ M-SPC & Same as RET but does not expunge and hide dormants.\\
+ M-C-RET & Enter group without any processing, changes will not be permanent.\\
+ SPC & Select this group and display the first (unread) article. [Same
+ prefix as above.]\\
+ ? & Give a very short help message.\\
+ $<$ & Go to the beginning of the Group buffer.\\
+ $>$ & Go to the end of the Group buffer.\\
+ , & Jump to the lowest-level group with unread articles.\\
+ . & Jump to the first group with unread articles.\\
+ \^{} & Enter the Server buffer mode.\\
+ a & Post an {\bf article} to a group
+ [Prefix: use group under point to find posting-style].\\
+ b & Find {\bf bogus} groups and delete them.\\
+ c & Mark all unticked articles in group as read ({\bf catch-up}).
+ [p/p]\\
+ g & Check the server for new articles ({\bf get}). [level]\\
+ M-g & Check the server for new articles in this group ({\bf get}). [p/p]\\
+ j & {\bf Jump} to a group.\\
+ m & {\bf Mail} a message to someone
+ [Prefix: use group under point to find posting-style].\\
+ n & Go to the {\bf next} group with unread articles. [distance]\\
+ M-n & Go to the {\bf next} group on the same or lower level.
+ [distance]\\
+ p & (DEL) Go to the {\bf previous} group with unread articles.
+ [distance]\\
+ M-p & Go to the {\bf previous} group on the same or lower level. [distance]\\
+ q & {\bf Quit} Gnus.\\
+ r & Re-read the init file ({\bf reset}).\\
+ s & {\bf Save} `.newsrc.eld' file (and `.newsrc' if
+ `gnus-save-newsrc-file').\\
+ z & Suspend (kill all buffers of) Gnus.\\
+ B & {\bf Browse} a foreign server.\\
+ C & Mark all articles in this group as read ({\bf Catch-up}). [p/p]\\
+ F & {\bf Find} new groups and process them.\\
+ N & Go to the {\bf next} group. [distance]\\
+ P & Go to the {\bf previous} group. [distance]\\
+ Q & {\bf Quit} Gnus without saving any startup (.newsrc) files.\\
+ R & {\bf Restart} Gnus.\\
+ Z & Clear the dribble buffer.\\
+ M-c & Clear data from group (marks and list of read articles). \\
+ C-c C-s & {\bf Sort} the groups by name, number of unread articles, or level
+ (depending on `gnus-group-sort-function').\\
+ C-c C-x & Run all expirable articles in group through the {\bf expiry}
+ process.\\
+ C-c M-C-x & Run all articles in all groups through the {\bf expiry} process.\\
+ C-c M-g & Activate all {\bf groups}.\\
+ C-c C-i & Gnus online-manual ({\bf info}).\\
+ C-x C-t & {\bf Transpose} two groups.\\
+ H f & Fetch this group's {\bf FAQ} (using ange-ftp).\\
+ H c & Display this group's {\bf charter}. [Prefix: query for group]\\
+ H C & Display this group's {\bf control message} (using
+ ange-ftp). [Prefix: query for group]\\
+ H v & (V) Display the Gnus {\bf version} number.\\
+ H d & (C-c C-d) Show the {\bf description} of this group
+ [Prefix: re-read from server].\\
+ M-d & {\bf Describe} all groups. [Prefix: re-read from server]\\
+ D g & Regenerate a Sieve script from group parameters.\\
+ D u & Regenerate Sieve script and {\bf upload} to server.\\
+ \end{keys}
+ }
+
+\newcommand{\ListGroups}{%
+ {\esamepage
+ \begin{keys}{A M}
+ A d & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\
+ A k & (C-c C-l) List all {\bf killed} groups.
+ [Prefix: look at active-file from server]\\
+ A l & List all groups on a specific level.
+ [Prefix: also list groups with no unread articles]\\
+ A a & (C-c C-a) List all groups whose names match a regexp
+ ({\bf apropos}).\\
+ A A & List the server's active-file.\\
+ A M & List groups that {\bf match} a regexp.\\
+ A m & List groups that {\bf match} a regexp and have unread articles.
+ [level]\\
+ A s & (l) List all {\bf subscribed} groups with unread articles.
+ [level; 5 and lower is the default]\\
+ A u & (L) List all groups (including read and {\bf unsubscribed}).
+ [level; 7 and lower is the default]\\
+ A z & List all {\bf zombie} groups.\\
+ A c & List all groups with cached articles. [level]\\
+ A ? & List all groups with dormant articles. [level]\\
+ \end{keys}
+ }
+
+ \newcommand{\CreateEditGroups}{%
+ {\esamepage
+ The select methods are indicated in parentheses.\\*
+ \begin{keys}{G DEL}
+ G a & Make the Gnus list {\bf archive} group. (nndir over ange-ftp)\\
+ G c & {\bf Customize} this group's parameters.\\
+ G d & Make a {\bf directory} group (every file must be a posting and files
+ must have numeric names). (nndir)\\
+ G D & Enter a {\bf directory} as a (temporary) group.
+ (nneething without recording articles read)\\
+ G e & (M-e) {\bf Edit} this group's select method.\\
+ G E & {\bf Edit} this group's info (select method, articles read, etc).\\
+ G f & Make a group based on a {\bf file}. (nndoc)\\
+ G h & Make the Gnus {\bf help} (documentation) group. (nndoc)\\
+ G k & Make a {\bf kiboze} group. (nnkiboze)\\
+ G m & {\bf Make} a new group.\\
+ G p & Edit this group's {\bf parameters}.\\
+ G r & Rename this group (does not work with read-only groups!).\\
+ G u & Create one of the groups mentioned in gnus-{\bf useful}-groups.\\
+ G v & Add this group to a {\bf virtual} group. [p/p]\\
+ G V & Make a new empty {\bf virtual} group. (nnvirtual)\\
+ G w & Create ephemeral group based on web-search. [Prefix: make solid group
+ instead]\\
+ G R & Make an {\bf RSS} group.\\
+ G DEL & {\bf Delete} group [Prefix: delete all articles as well].\\
+ G x & Expunge all deleted articles in an nnimap mailbox.\\
+ G l & Edit ACL (Access Control {\bf List}) for an nnimap mailbox.\\
+ \end{keys}
+ You can also create mail-groups and read your mail with Gnus (very useful
+ if you are subscribed to mailing lists), using one of the methods
+ nnmbox, nnbabyl, nnml, nnmh, or nnfolder. Read about it in the online info
+ (C-c C-i g Reading Mail RET).
+ }}
+
+ % TODO:
+ \newcommand{\SoupCommands}{%
+ \begin{keys}{G s w}
+ G s b & gnus-group-brew-soup: not documented.\\
+ G s p & gnus-soup-pack-packet: not documented.\\
+ G s r & nnsoup-pack-replies: not documented.\\
+ G s s & gnus-soup-send-replies: not documented.\\
+ G s w & gnus-soup-save-areas: not documented.\\
+ \end{keys}}
+
+ \newcommand{\MarkGroups}{%
+ \begin{keys}{M m}
+ M m & (\#) Set the process {\bf mark} on this group. [scope]\\
+ M r & Mark all groups matching regular expression.\\
+ M u & (M-\#) Remove process mark from this group ({\bf unmark}).
+ [scope]\\
+ M U & Remove the process mark from all groups (\textbf{unmark all}).\\
+ M w & Mark all groups in the current region. [prefix: unmark]\\
+ M b & Mark all groups in the {\bf buffer}. [prefix: unmark]\\
+ \end{keys}}
+
+ \newcommand{\GroupTopicsGeneral}{%
+ {\esamepage
+ Topics are ``categories'' for groups. Press t in the group-buffer to
+ toggle gnus-topic-mode (C-c C-i g Group Topics RET).\\*
+ \begin{keys}{C-c C-x}
+ T n & Prompt for topic {\bf name} and create it.\\
+ T m & {\bf Move} the current group to some other topic [p/p].\\
+ T j & {\bf Jump} to a topic.\\
+ T c & {\bf Copy} the current group to some other topic [p/p].\\
+ T D & Remove (not delete) the current group [p/p].\\
+ T M & {\bf Move} all groups matching a regexp to a topic.\\
+ T C & {\bf Copy} all groups matching a regexp to a topic.\\
+ T H & Toggle {\bf hiding} of empty topics.\\
+ T r & {\bf Rename} a topic.\\
+ T DEL & Delete an empty topic.\\
+ T \# & Mark all groups in the current topic with the process-mark.\\
+ T M-\# & Remove the process-mark from all groups in the current topic.\\
+ T TAB & (TAB) Indent current topic [Prefix: unindent].\\
+ M-TAB & Unindent the current topic.\\
+ RET & (SPC) Either unfold topic or enter group [level].\\
+ T s & {\bf Show} the current topic. [Prefix: show permanently]\\
+ T h & {\bf Hide} the current topic. [Prefix: hide permanently]\\
+ C-c C-x & Expire all articles in current group or topic.\\
+ C-k & {\bf Kill} a group or topic.\\
+ C-y & {\bf Yank} a group or topic.\\
+ A T & List active-file using {\bf topics}.\\
+ G p & Edit topic-{\bf parameters}.\\
+ T M-n & Go to {\bf next} topic. [distance]\\
+ T M-p & Go to {\bf previous} topic. [distance]\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\TopicSorting}{%
+ {\esamepage
+ \begin{keys}{T S m}
+ T S a & Sort {\bf alphabetically}.\\
+ T S u & Sort by number of {\bf unread} articles.\\
+ T S l & Sort by group {\bf level}.\\
+ T S v & Sort by group score ({\bf value}).\\
+ T S r & Sort by group {\bf rank}.\\
+ T S m & Sort by {\bf method}.\\
+ T S e & Sort by {\bf server} name.\\
+ T S s & Sort according to `gnus-group-sort-function'.\\
+ \end{keys}
+ With a prefix these commands will sort in reverse order.
+ }
+ }
+
+ \newcommand{\SubscribeKillYankGroups}{%
+ {\esamepage
+ \begin{keys}{S C-k}
+ S k & (C-k) {\bf Kill} this group.\\
+ S l & Set the {\bf level} of this group. [p/p]\\
+ S s & (U) Prompt for a group and toggle its {\bf subscription}.\\
+ S t & (u) {\bf Toggle} subscription to this group. [p/p]\\
+ S w & (C-w) Kill all groups in the region.\\
+ S y & (C-y) {\bf Yank} the last killed group.\\
+ S z & Kill all {\bf zombie} groups.\\
+ S C-k & Kill all groups on a certain level.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\SummaryModeGeneral}{%
+ {\esamepage
+ \begin{keys}{M-RET}
+ SPC & (A SPC, A n) Select an article, scroll it one page, move to the
+ next one.\\
+ DEL & (A DEL, A p, b) Scroll this article one page back. [distance]\\
+ RET & (A RET) Scroll this article one line forward. [distance]\\
+ M-RET & (A M-RET) Scroll this article one line backward. [distance]\\
+ = & Expand the Summary window (fullsize).
+ [Prefix: shrink to display article window]\\
+ %
+ \& & Execute a command on all articles whose header matches a regexp.
+ [Prefix: move backwards]\\
+ M-\& & Execute a command on all articles having the process mark.\\
+ %
+ M-n & (G M-n) Go to {\bf next} summary line of unread article.
+ [distance]\\
+ M-p & (G M-p) Go to {\bf previous} summary line of an unread article.
+ [distance]\\
+ M-s & {\bf Search} through all subsequent articles for a regexp.\\
+ M-r & Search through all previous articles for a regexp.\\
+ %
+ A P & {\bf Postscript}-print current buffer.\\
+ %
+ M-k & Edit this group's {\bf kill} file.\\
+ M-K & Edit the general {\bf kill} file.\\
+ %
+ C-t & Toggle {\bf truncation} of summary lines.\\
+ Y g & Regenerate the summary-buffer.\\
+ Y c & Insert all cached articles into the summary-buffer.\\
+ %
+ M-C-e & {\bf Edit} the group-parameters.\\
+ M-C-a & Customize the group-parameters.\\
+ %
+ % article handling
+ %
+ A $<$ & ($<$, A b) Scroll to the beginning of this article.\\
+ A $>$ & ($>$, A e) Scroll to the end of this article.\\
+ A s & (s) Perform an i{\bf search} in the article buffer.\\
+ %
+ A D & (C-d) Un{\bf digestify} this article into a separate group.
+ [Prefix: force digest]\\
+ M-C-d & Like C-d, but open several documents in nndoc-groups, wrapped
+ in an nnvirtual group [p/p]\\
+ %
+ A g & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\
+ A r & (\^{}, A \^{}) Fetch the parent(s) of this article.
+ [Prefix: if positive fetch \textit{n} ancestors;
+ negative: fetch only the \textit{n}th ancestor]\\
+ A t & {\bf Translate} this article.\\
+ A R & Fetch all articles mentioned in the {\bf References}-header.\\
+ A T & Fetch full \textbf{thread} in which the current article appears.\\
+ M-\^{} & Fetch the article with a given Message-ID.\\
+ S y & {\bf Yank} the current article into an existing message-buffer.
+ [p/p]\\
+ A M & Setup group parameters for {\bf mailing} lists from
+ headers. [Prefix: replace old settings]\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\MIMESummary}{%
+ {\esamepage
+ For the commands operating on one MIME part (a subset of gnus-article-*), a
+ prefix selects which part to operate on. If the point is placed over a
+ MIME button in the article buffer, use the corresponding bindings for the
+ article buffer instead.
+
+ \begin{keys}{W M w}
+ K v & (b, W M b) {\bf View} the MIME-part.\\
+ K o & {\bf Save} the MIME part.\\
+ K c & {\bf Copy} the MIME part.\\
+ K e & View the MIME part {\bf externally}.\\
+ K i & View the MIME part {\bf internally}.\\
+ K $\mid$ & Pipe the MIME part to an external command.\\
+ K b & Make all the MIME parts have buttons in front of them.\\
+ K m & Try to repair {\bf multipart-headers}.\\
+ K C & View the MIME part using a different {\bf charset}.\\
+ X m & Save all parts matching a MIME type to a directory. [p/p]\\
+ M-t & Toggle the buttonized display of the article buffer.\\
+ W M w & Decode RFC2047-encoded words in the article headers.\\
+ W M c & Decode encoded article bodies. [Prefix: prompt for charset]\\
+ W M v & View all MIME parts in the current article.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\SortSummary}{%
+ {\esamepage
+ \begin{keys}{C-c C-s C-a}
+ C-c C-s C-a & Sort the summary-buffer by {\bf author}.\\
+ C-c C-s C-t & Sort the summary-buffer by {\bf recipient}.\\
+ C-c C-s C-d & Sort the summary-buffer by {\bf date}.\\
+ C-c C-s C-i & Sort the summary-buffer by article score.\\
+ C-c C-s C-l & Sort the summary-buffer by amount of {\bf lines}.\\
+ C-c C-s C-c & Sort the summary-buffer by length.\\
+ C-c C-s C-n & Sort the summary-buffer by article {\bf number}.\\
+ C-c C-s C-s & Sort the summary-buffer by {\bf subject}.\\
+ C-c C-s C-r & Sort the summary-buffer {\bf randomly}.\\
+ C-c C-s C-o & Sort the summary-buffer using the default method.\\
+ \end{keys}
+ With a prefix these functions sort in reverse order.
+ }
+ }
+
+ \newcommand{\MailGroups}{% formerly \Bsubmap
+ {\esamepage
+ These commands (except `B c') are only valid in a mail group.\\*
+ \begin{keys}{B M-C-e}
+ B DEL & (B backspace, B delete) {\bf Delete} the mail article from disk (!).
+ [p/p]\\
+ B B & Crosspost this article to another group.\\
+ B c & {\bf Copy} this article from any group to a mail group. [p/p]\\
+ B e & {\bf Expire} all expirable articles in this group. [p/p]\\
+ B i & {\bf Import} a random file into this group.\\
+ B I & Create an empty article in this group.\\
+ B m & {\bf Move} the article from one mail group to another. [p/p]\\
+ B p & Query whether the article was {\bf posted} as well.\\
+ B q & {\bf Query} where the article will end up after fancy splitting\\
+ B r & {\bf Respool} this mail article. [p/p]\\
+ B t & {\bf Trace} the fancy splitting patterns applied to this article.\\
+ B w & (e) Edit this article.\\
+ B M-C-e & {\bf Expunge} (delete from disk) all expirable articles in this group
+ (!). [p/p]\\
+ K E & {\bf Encrypt} article body. [p/p]\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\DraftGroup}{% formerly \Dsubmap
+ {\esamepage
+ The ``drafts''-group contains messages that have been saved but not sent
+ and rejected articles. \\*
+ \begin{keys}{B DEL}
+ D e & \textbf{edit} message.\\
+ D s & \textbf{Send} message. [p/p]\\
+ D S & \textbf{Send} all messages.\\
+ D t & \textbf{Toggle} sending (mark as unsendable).\\
+ B DEL & \textbf{Delete} message (like in mailgroup).\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\SelectArticles}{% formerly \Gsubmap
+ {\esamepage
+ These commands select the target article. They do not use the prefix.\\*
+ \begin{keys}{G C-n}
+ h & Enter article-buffer.\\
+ G b & (,) Go to the {\bf best} article (the one with highest score).\\
+ G f & (.) Go to the {\bf first} unread article.\\
+ G n & (n) Go to the {\bf next} unread article.\\
+ G p & (p) Go to the {\bf previous} unread article.\\
+ %
+ G N & (N) Go to {\bf the} next article.\\
+ G P & (P) Go to the {\bf previous} article.\\
+ %
+ G C-n & (M-C-n) Go to the {\bf next} article with the same subject.\\
+ G C-p & (M-C-p) Go to the {\bf previous} article with the same subject.\\
+ %
+ G l & (l) Go to the previously read article ({\bf last-read-article}).\\
+ G o & Pop an article off the summary history and go to it.\\
+ %
+ G g & Search an article via subject.\\
+ G j & (j) Search an article via Message-Id or subject.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\ArticleModeGeneral}{%
+ {\esamepage
+ The normal navigation keys work in Article mode. Some additional keys are:\\
+ \begin{keys}{C-c RET}
+ C-c \^{} & Get the article with the Message-ID near point.\\
+ C-c RET & Send reply to address near point.\\
+ h & Go to the \textbf{header}-line of the article in the
+ summary-buffer.\\
+ s & Go to \textbf{summary}-buffer.\\
+ RET & (middle mouse button) Activate the button at point to follow
+ an URL or Message-ID.\\
+ TAB & Move the point to the next button.\\
+ M-TAB & Move point to previous button.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\WashArticle}{% formerly \Wsubmap
+ {\esamepage
+ \begin{keys}{W W H}
+ W 6 & Translate a base64 article.\\
+ W a & Strip certain {\bf headers} from body.\\
+ W b & Make Message-IDs and URLs in the article mouse-clickable
+ {\bf buttons}.\\
+ W c & Translate CRLF-pairs to LF and then remaining CR's to LF's.\\
+ W d & Treat {\bf dumbquotes}.\\
+ W e & Treat {\bf emphasized} text.\\
+ W h & Treat {\bf HTML}.\\
+ W l & (w) Remove page breaks ({\bf\^{}L}) from the article.\\
+ W m & {\bf Morse} decode article.\\
+ W o & Treat {\bf overstrike} or underline (\^{}H\_) in the article.\\
+ W p & Verify X-{\bf PGP}-Sig header.\\
+ W q & Treat {\bf quoted}-printable in the article.\\
+ W r & (C-c C-r) Do a Caesar {\bf rotate} (rot13) on the article.\\
+ W s & Verify (and decrypt) a {\bf signed} message.\\
+ W t & (t) {\bf Toggle} display of all headers.\\
+ W u & {\bf Unsplit} broken URLs.\\
+ W v & (v) Toggle permanent {\bf verbose} displaying of all headers.\\
+ W w & Do word {\bf wrap} in the article.\\
+ W B & Add clickable {\bf buttons} to the article headers.\\
+ W C & {\bf Capitalize} first word in each sentence.\\
+ W Q & Fill long lines.\\
+ W Z & Translate a HZ-encoded article.\\
+ %
+ W G u & {\bf Unfold} folded header lines.\\
+ W G f & {\bf Fold} all header lines.\\
+ W G n & Unfold {\bf Newsgroups:} and Follow-Up-To:.\\
+ %
+ W Y c & Repair broken {\bf citations}.\\
+ W Y a & Repair broken {\bf attribution} lines.\\
+ W Y u & {\bf Unwrap} broken citation lines.\\
+ W Y f & Do a {\bf full} deuglification (W Y c, W Y a, W Y u).\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\BlankAndWhitespace}{%
+ {\esamepage
+ \begin{keys}{W E w}
+ W E l & Strip blank {\bf lines} from the beginning of the article.\\
+ W E m & Replace blank lines with empty lines and remove {\bf multiple}
+ blank lines.\\
+ W E t & Remove {\bf trailing} blank lines.\\
+ W E a & Strip blank lines at start and end
+ (W E l, W E m and W E t).\\
+ W E A & Strip {\bf all} blank lines.\\
+ W E s & Strip leading blank lines from the article body.\\
+ W E e & Strip trailing blank lines from the article body.\\
+ W E w & Remove leading {\bf whitespace} from all headers.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\Picons}{%
+ {\esamepage
+ \begin{keys}{W D D}
+ W D s & (W g) Display {\bf smilies}.\\
+ W D x & (W f) Look for and display any X-{\bf Face} headers.\\
+ W D d & Display any Face headers.\\
+ W D n & Toggle picons in {\bf Newsgroups} and Followup-To.\\
+ W D m & Toggle picons in {\bf mail} headers (To and Cc).\\
+ W D f & Toggle picons in {\bf From}.\\
+ W D D & Remove all images from the article buffer.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\TimeAndDate}{%
+ {\esamepage
+ \begin{keys}{W T u}
+ W T u & (W T z) Display the article timestamp in GMT ({\bf UT, ZULU}).\\
+ W T i & Display the article timestamp in {\bf ISO} 8601.\\
+ W T l & Display the article timestamp in the {\bf local} timezone.\\
+ W T s & Display according to `gnus-article-time-format'.\\
+ W T e & Display the time {\bf elapsed} since it was sent.\\
+ W T o & Display the {\bf original} timestamp.\\
+ W T p & Display the date in format that's {\bf
+ pronounceable} in English.\\
+ \end{keys}
+ }
+ }
+
+ \newcommand{\HideHighlightArticle}{%
+ {\esamepage
+ \begin{keys}{W W C-c}
+ W W a & Hide {\bf all} unwanted parts. Calls W W h, W W s, W W C-c.\\
+ W W h & Hide article {\bf headers}.\\
+ W W b & Hide {\bf boring} headers.\\
+ W W s & Hide {\bf signature}.\\
+ W W l & Hide {\bf list} identifiers in subject-header.\\
+ W W P & Hide {\bf PEM} (privacy enhanced messages).\\
+ W W B & Hide banner specified by group parameter.\\
+ W W c & Hide {\bf citation}.\\
+ W W C-c & Hide {\bf citation} using a more intelligent algorithm.\\
+ W W C & Hide cited text in articles that aren't roots.\\
+ W H a & Highlight {\bf all} parts. Calls W b, W H c, W H h, W H s.\\
+ W H c & Highlight article {\bf citations}.\\
+ W H h & Highlight article {\bf headers}.\\
+ W H s & Highlight article {\bf signature}.\\
+ \end{keys}
+ For all hiding-commands: A positive prefix always hides, and a negative
+ prefix will show what was previously hidden.
+ }}
+
+ \newcommand{\MIMEArticleMode}{%
+ {\esamepage
+ \begin{keys}{RET}
+ RET & (BUTTON-2) Toggle display of the MIME object.\\
+ v & Prompt for a method and then view object using this method.\\
+ o & Prompt for a filename and save the MIME object.\\
+ C-o & Prompt for a filename to save the MIME object to and remove it.\\
+ d & {\bf Delete} the MIME object.\\
+ c & {\bf Copy} the MIME object to a new buffer and display this buffer.\\
+ i & Display the MIME object in this buffer.\\
+ C & Copy the MIME object to a new buffer and display this buffer using {\bf Charset} \\
+ E & View internally. \\
+ e & View {\bf externally}. \\
+ t & View the MIME object as a different {\bf type}.\\
+ p & {\bf Print} the MIME object.\\
+ $\mid$ & Pipe the MIME object to a process.\\
+ . & Take action on the MIME object.\\
+ \end{keys}
+ }
+ }
+
+ %% end of article mode for reading ..........................................
+
+ \newcommand{\MarkArticlesGeneral}{% formerly \Msubmap
+ {\esamepage
+ \begin{keys}{M M-C-r}
+ d & (M d, M r) Mark this article as read and move to the next one.
+ [scope]\\
+ D & Mark this article as read and move to previous one. [scope]\\
+ ! & (u, M !, M t) Tick this article (mark it as interesting) and move
+ to the next one. [scope]\\
+ U & Tick this article and move to the previous one. [scope]\\
+ M ? & (?) Mark this article as dormant (only followups are
+ interesting). [scope]\\
+ M D & Show all {\bf dormant} articles (normally they are hidden unless they
+ have any followups).\\
+ M M-D & Hide all {\bf dormant} articles.\\
+ C-w & Mark all articles between point and mark as read.\\
+ M-u & (M SPC, M c) Clear all marks from this article and move to the next
+ one. [scope]\\
+ M-U & Clear all marks from this article and move to the previous one.
+ [scope]\\
+ %
+ M e & (E, M x) Mark this article as {\bf expirable}. [scope]\\
+ %
+ M k & (k) {\bf Kill} all articles with same subject, select
+ next unread one.\\
+ M K & (C-k) {\bf Kill} all articles with the same subject as this one.\\
+ %
+ M C & {\bf Catch-up} the articles that are not ticked and not dormant.\\
+ M C-c & {\bf Catch-up} all articles in this group.\\
+ M H & {\bf Catch-up} (mark read) this group to point (to-{\bf here}).\\
+ %
+ M b & Set a {\bf bookmark} in this article.\\
+ M B & Remove the {\bf bookmark} from this article.\\
+ %
+ M M-r & (x) Expunge all {\bf read} articles from this group.\\
+ M M-C-r & Expunge all articles having a given mark.\\
+ M S & (C-c M-C-s) {\bf Show} all expunged articles.\\
+ M M C-h & Displays some more keys doing ticking slightly differently.\\
+ \end{keys}
+ The variable `gnus-summary-goto-unread' controls what happens after a mark
+ has been set (C-x C-i g Setting Marks RET)
+ }}
+
+ \newcommand{\MarkByScore}{%
+ \begin{keys}{M V m}
+ M V c & {\bf Clear} all marks from all high-scored articles. [score]\\
+ M V k & {\bf Kill} all low-scored articles. [score]\\
+ M V m & Mark all high-scored articles with a given {\bf mark}. [score]\\
+ M V u & Mark all high-scored articles as interesting (tick them). [score]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\ProcessMark}{%
+ {\esamepage
+ These commands set and remove the process mark (\#). You only need to use
+ it if the set of articles you want to operate on is non-contiguous. Else
+ use a numeric prefix.\\*
+ \begin{keys}{M P R}
+ M P p & (\#, M \#) Mark this article.\\
+ M P u & (M-\#, M M-\#) \textbf{unmark} this article.\\
+ M P b & Mark all articles in {\bf buffer}.\\
+ M P r & Mark all articles in the {\bf region}.\\
+ M P g & Unmark all articles in the region.\\
+ M P R & Mark all articles matching a {\bf regexp}.\\
+ M P G & Unmark all articles matching a regexp.\\
+ M P t & Mark all articles in this (sub){\bf thread}.\\
+ M P T & Unmark all articles in this (sub){\bf thread}.\\
+ M P s & Mark all articles in the current {\bf series}.\\
+ M P S & Mark all {\bf series} that already contain a marked article.\\
+ M P a & Mark {\bf all} articles (in series order).\\
+ M P U & \textbf{unmark} all articles.\\
+ M P i & {\bf Invert} the list of process-marked articles.\\
+ M P k & Push process-mark set onto stack and unmark
+ all articles.\\
+ M P y & Pop process-mark set from stack and restore it.\\
+ M P w & Push process-mark set on the stack.\\
+ M P v & Mark all articles with score over default score. [Prefix: score]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\Limiting}{%
+ {\esamepage
+ \begin{keys}{/M}
+ // & (/s) Limit the summary-buffer to articles matching {\bf subject}.\\
+ /a & Limit the summary-buffer to articles matching {\bf author}.\\
+ /R & Limit the summary-buffer to articles matching {\bf recipient}.\\
+ /x & Limit depending on ``extra'' headers.\\
+ /u & (x) Limit to {\bf unread} articles.
+ [Prefix: also exclude ticked and dormant articles]\\
+ /. & Limit to unseen articles.\\
+ /m & Limit to articles marked with specified {\bf mark}.\\
+ /t & Ask for a number and exclude articles younger than that many days.
+ [Prefix: exclude older articles]\\
+ /n & Limit to current article. [p/p]\\
+ /w & Pop previous limit off stack and restore it.
+ [Prefix: pop all limits]\\
+ /v & Limit to score. [score]\\
+ /E & (M S) Include all expunged articles in the limit.\\
+ /D & Include all dormant articles in the limit.\\
+ /* & Limit to cached articles.\\
+ Y C & Include all cached articles in the limit.\\
+ /d & Exclude all dormant articles from the limit.\\
+ /M & Exclude all marked articles.\\
+ /T & Include all articles from the current thread in the limit.\\
+ /c & Exclude all dormant articles that have no children from the limit.\\
+ /C & Mark all excluded unread articles as read.
+ [Prefix: also mark ticked and dormant articles]\\
+ /o & Insert all {\bf old} articles. [Prefix: how many]\\
+ /N & Insert all {\bf new} articles.\\
+ /p & Limit to articles {\bf predicated} in the `display' group parameter.\\
+ /r & Limit to {\bf replied} articles. [Prefix: unreplied]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\OutputArticles}{% formerly \Osubmap
+ {\esamepage
+ \begin{keys}{O m}
+ O o & (o, C-o) Save this article using the default article saver. [p/p]\\
+ O b & Save this article's {\bf body} in plain file format [p/p]\\
+ O f & Save this article in plain {\bf file} format. [p/p]\\
+ O F & like O f, but overwrite file's contents. [p/p]\\
+ O h & Save this article in {\bf mh} folder format. [p/p]\\
+ O m & Save this article in {\bf mail} format. [p/p]\\
+ O r & Save this article in {\bf rmail} format. [p/p]\\
+ O v & Save this article in {\bf vm} format. [p/p]\\
+ O p & ($\mid$) {\bf Pipe} this article to a shell command. [p/p]\\
+ O P & \textbf{Print} this article using Muttprint. [p/p]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\PostReplyetc}{% formerly \Ssubmap
+ {\esamepage
+ These commands put you in a separate news or mail buffer. See the section
+ about composing messages for more information.\\*
+ %After
+ %editing the article, send it by pressing C-c C-c. If you are in a
+ %foreign group and want to post the article using the foreign server, give
+ %a prefix to C-c C-c.\\*
+ \begin{keys}{S O m}
+ S p & (a) {\bf Post} an article to this group.\\
+ S f & (f) Post a {\bf followup} to this article.\\
+ S F & (F) Post a {\bf followup} and include the original. [p/p]\\
+ S o p & Forward this article as a {\bf post} to a newsgroup.\\
+ S M-c & Complain about excessive crossposting to
+ article's author. [p/p]\\
+ %
+ S m & (m) Send a {\bf mail} to some other person.\\
+ S r & (r) Mail a {\bf reply} to the author of this article.\\
+ S R & (R) Mail a {\bf reply} and include the original. [p/p]\\
+ S B r & Like S r but ignore the Reply-To: header.\\
+ S B R & Like S R but ignore the Reply-To: header.\\
+ S w & Mail a {\bf wide} reply to this article.\\
+ S W & Mail a {\bf wide} reply to this article and include
+ the original.\\
+ S v & Mail a {\bf very} wide reply to this article.\\
+ S V & Mail a {\bf very} wide reply to this article and include the original.\\
+ S o m & (C-c C-f) Forward this article by {\bf mail} to a person.\\
+ S D b & Resend {\bf bounced} mail.\\
+ S D r & {\bf Resend} mail to a different person.\\
+ S D e & {\bf Edit} and resend.\\
+ %
+ S n & Post a followup via {\bf news} even if you got the message
+ through mail.\\
+ S N & Post a followup via {\bf news} and include the original mail.
+ [p/p]\\
+ %
+ S c & (C) {\bf Cancel} this article (only works if it is
+ your own). [p/p]\\
+ S s & {\bf Supersede} this article with a new one (only for own
+ articles).\\
+ %
+ S O m & Digest these series and forward by {\bf mail}. [p/p]\\
+ S O p & Digest these series and forward as a {\bf post} to a newsgroup.
+ [p/p]\\
+ %
+ S u & {\bf Uuencode} a file and post it as a series.\\
+ \end{keys}
+ If you want to cancel or supersede an article you just posted (before it
+ has appeared on the server), go to the *post-news* buffer, change
+ `Message-ID' to `Cancel' or `Supersedes' and send again with C-c C-c.
+ }}
+
+\newcommand{\Threading}{% formerly \Tsubmap
+ {\esamepage
+ \begin{keys}{T M-\#}
+ T \# & Mark this thread with the process mark.\\
+ T M-\# & Remove process-marks from this thread.\\
+ %
+ T t & Re-{\bf thread} the current article's thread.\\
+ T \^{} & Make the current article child of the marked (or previous) one.\\
+ % movement
+ T n & (M-C-f, M-down) Go to the {\bf next} thread. [distance]\\
+ T p & (M-C-b, M-up) Go to the {\bf previous} thread. [distance]\\
+ T d & {\bf Descend} this thread. [distance]\\
+ T u & Ascend this thread ({\bf up}-thread). [distance]\\
+ T o & Go to the top of this thread.\\
+ %
+ T s & {\bf Show} the thread hidden under this article.\\
+ T h & {\bf Hide} this (sub)thread.\\
+ %
+ T i & {\bf Increase} the score of this thread.\\
+ T l & (M-C-l) {\bf Lower} the score of this thread.\\
+ %
+ T k & (M-C-k) {\bf Kill} the current (sub)thread. [Negative prefix:
+ tick it, positive prefix: unmark it.]\\
+ %
+ T H & {\bf Hide} all threads.\\
+ T S & {\bf Show} all hidden threads.\\
+ T T & (M-C-t) {\bf Toggle} threading.\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\Scoring}{% formerly \Vsubmap
+ {\esamepage
+ Read about Adaptive Scoring in the online info.\\*
+ \begin{keys}{\bf A p m l}
+ V a & {\bf Add} a new score entry, specifying all elements.\\
+ V c & Specify a new score file as {\bf current}.\\
+ V e & {\bf Edit} the current score alist.\\
+ V f & Edit a score {\bf file} and make it the current one.\\
+ V m & {\bf Mark} all articles below a given score as read.\\
+ V s & Set the {\bf score} of this article.\\
+ V t & Display all score rules applied to this article ({\bf track}).\\
+ W w & List {\bf words} used in scoring.\\
+ V x & {\bf Expunge} all low-scored articles. [score]\\
+ V C & {\bf Customize} current score file with a user-friendly
+ interface.\\
+ V F & {\bf Flush} the cache of score files.\\
+ V R & {\bf Re-score} the summary buffer.\\
+ V S & Display the {\bf score} of this article.\\
+ \bf A p m l& Make a scoring entry based on this article.\\
+ \end{keys}
+ The four letters stand for:\\*
+ \quad \B{A}ction: I)ncrease, L)ower;\\*
+ \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-post), d)ate, l)ines,
+ message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\*
+ \quad \B{m}atch type:\\*
+ \qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\*
+ \qquad date: b)efore, a)t, n)this,\\*
+ \qquad number: $<$, =, $>$;\\*
+ \quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate.
+
+ If you type the second letter in uppercase, the remaining two are assumed
+ to be s)ubstring and t)emporary.
+ If you type the third letter in uppercase, the last one is assumed to be
+ t)emporary.
+
+ \quad Extra keys for manual editing of a score file:\\*
+ \begin{keys}{C-c C-c}
+ C-c C-c & Finish editing the score file.\\
+ C-c C-d & Insert the current {\bf date} as number of days.\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\ExtractSeries}{% formerly \Xsubmap
+ {\esamepage
+ Gnus recognizes if the current article is part of a series (multipart
+ posting whose parts are identified by numbers in their subjects, e.g.{}
+ 1/10\dots10/10) and processes the series accordingly. You can mark and
+ process more than one series at a time. If the posting contains any
+ archives, they are expanded and gathered in a new group.\\*
+ \begin{keys}{X p}
+ X b & Un-{\bf binhex} these series. [p/p]\\
+ X o & Simply {\bf output} these series (no decoding). [p/p]\\
+ X p & Unpack these {\bf postscript} series. [p/p]\\
+ X s & Un-{\bf shar} these series. [p/p]\\
+ X u & {\bf Uudecode} these series. [p/p]\\
+ \end{keys}
+
+ Each one of these commands has four variants:\\*
+ \begin{keys}{X v \bf Z}
+ X \bf z & Decode these series. [p/p]\\
+ X \bf Z & Decode and save these series. [p/p]\\
+ X v \bf z & Decode and view these series. [p/p]\\
+ X v \bf Z & Decode, save and view these series. [p/p]\\
+ \end{keys}
+ where {\bf z} or {\bf Z} identifies the decoding method (b, o, p, s, u).
+
+ An alternative binding for the most-often used of these commands is\\*
+ \begin{keys}{C-c C-v C-v}
+ C-c C-v C-v & (X v u) Uudecode and view these series. [p/p]\\
+ \end{keys}
+ }}
+
+\newcommand{\ExitSummary}{% formerly \Zsubmap
+ {\esamepage
+ \begin{keys}{Z G}
+ Z Z & (q, Z Q) Exit this group.\\
+ Z E & (Q) {\bf Exit} without updating the group information.\\
+ %
+ Z c & (c) Mark all unticked articles as read ({\bf catch-up}) and exit.\\
+ Z C & Mark all articles as read ({\bf catch-up}) and exit.\\
+ %
+ Z n & Mark all articles as read and go to the {\bf next} group.\\
+ Z N & Exit and go to {\bf the} next group.\\
+ Z P & Exit and go to the {\bf previous} group.\\
+ %
+ Z G & (M-g) Check for new articles in this group ({\bf get}).\\
+ Z R & (C-x C-s) Exit this group, and then enter it again ({\bf reenter}).
+ [Prefix: select all articles, read and unread.]\\
+ Z s & Update and save the dribble buffer. [Prefix: save .newsrc* as well]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\MsgCompositionGeneral}{%
+ Press C-c ? in the composition-buffer to get this information.\\*
+ {\esamepage
+ \begin{keys}{C-c C-m}
+ % sending
+ C-c C-c & Send message and exit. [Prefix: send via foreign server]\\
+ C-c C-s & Send message. [Prefix: send via foreign server]\\
+ C-c C-d & Don't send message (save as \textbf{draft}).\\
+ C-c C-k & \textbf{Kill} message-buffer.\\
+ C-c C-m & {\bf Mail} reply to the address near point.
+ [Prefix: include the original]\\
+ % modify headers/body
+ C-c C-o & Sort headers.\\
+ C-c C-e & \textbf{Elide} region.\\
+ C-c C-v & Kill everything outside region.\\
+ C-c C-r & Do a \textbf{Rot-13} on the body.\\
+ C-c C-w & Insert signature (from `message-signature-file').\\
+ C-c C-z & Kill everything up to signature.\\
+ C-c C-y & \textbf{Yank} original message.\\
+ C-c C-q & Fill the yanked message.\\
+ C-c M-C-y & \textbf{Yank} a buffer and quote it.\\
+ M-RET & Insert four newlines and format quoted text. [Prefix:
+ justify as well]\\
+ C-c M-r & \textbf{Rename} message buffer. [Prefix: ask for new name]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\MsgCompositionMovementArticle}{%
+ The following functions create the header-field if necessary.\\*
+ {\esamepage
+ \begin{keys}{C-c C-f C-u}
+ C-c TAB & Move to \textbf{signature}.\\
+ C-c C-b & Move to \textbf{body}.\\
+ C-c C-f C-t & (C-c C-t) Move to \textbf{To:}.\\
+ C-c C-f C-c & Move to \textbf{Cc:}.\\
+ C-c C-f C-b & Move to \textbf{Bcc:}.\\
+ C-c C-f C-w & Move to \textbf{Fcc:}.\\
+ C-c C-f C-s & Move to \textbf{Subject:}.\\
+ C-c C-f C-r & Move to \textbf{Reply-To:}.\\
+ C-c C-f C-f & Move to \textbf{Followup-To:}.\\
+ C-c C-f C-n & (C-c C-n) Move to \textbf{Newsgroups:}.\\
+ C-c C-f C-u & Move to \textbf{Summary:}.\\
+ C-c C-f C-k & Move to \textbf{Keywords:}.\\
+ C-c C-f C-d & Move to \textbf{Distribution:}.\\
+ C-c C-f C-m & Move to \textbf{Mail-Followup-To:}.\\
+ C-c C-f C-o & Move to \textbf{From:}.\\
+ C-c C-f C-a & Insert a reasonable \textbf{Mail-Followup-To:} for
+ an unsubscribed list. [Prefix: include addresses in \textbf{Cc:}]\\
+ C-c C-f TAB & (C-c C-u) Move to \textbf{Importance:}.\\
+ C-c M-n & Insert \textbf{Disposition-Notification-To:}
+ (request receipt).\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\MsgCompositionMML}{%
+ {\esamepage
+ \begin{keys}{C-c C-m P}
+ C-c C-m f & (C-c C-a) Attach \textbf{file}.\\
+ C-c C-m b & Attach contents of \textbf{buffer}.\\
+ C-c C-m e & Attach \textbf{external} file (ftp..).\\
+ C-c C-m P & Create MIME-\textbf{preview} (new
+ buffer). [Prefix: show raw MIME preview]\\
+ C-c C-m v & \textbf{Validate} article.\\
+ C-c C-m p & Insert \textbf{part}.\\
+ C-c C-m m & Insert \textbf{multi}-part.\\
+ C-c C-m q & \textbf{Quote} region.\\
+ C-c C-m c s & Encrypt message using \textbf{S/MIME}.\\
+ C-c C-m c o & Encrypt message using PGP.\\
+ C-c C-m c p & Encrypt message using \textbf{PGP/MIME}.\\
+ C-c C-m s s & Sign message using \textbf{S/MIME}.\\
+ C-c C-m s o & Sign message using PGP.\\
+ C-c C-m s p & Sign message using \textbf{PGP/MIME}.\\
+ C-c C-m C-n & Remove security related MML tags from message.\\
+ % TODO: narrow headers (C-c C-m n) ?
+ \end{keys}
+ }
+ }
+
+%% TODO:
+\newcommand{\ServerMode}{%
+ {\esamepage
+ To enter this mode, press \^{} while in Group mode.\\*
+ \begin{keys}{SPC}
+ SPC & (RET) Browse this server.\\
+ a & {\bf Add} a new server.\\
+ c & {\bf Copy} this server.\\
+ e & {\bf Edit} a server.\\
+ k & {\bf Kill} this server. [scope]\\
+ l & {\bf List} all servers.\\
+ q & Return to the group buffer ({\bf quit}).\\
+ s & Request that the server scan its sources for new articles.\\
+ g & Request that the server regenerate its data.\\
+ y & {\bf Yank} the previously killed server.\\
+ O & Try to {\bf open} a connection to this server.\\
+ C & {\bf Close} connection to this server.\\
+ D & Mark this server as unreachable ({\bf deny}).\\
+ M-o & {\bf Open} the connection to all servers.\\
+ M-c & {\bf Close} the connection to all servers.\\
+ R & Make all denied servers into closed servers.\\
+ L & Set server status to offline.\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\BrowseServer}{%
+ {\esamepage
+ To enter this mode, press `B' while in Group mode.\\*
+ \begin{keys}{RET}
+ RET & Enter the current group.\\
+ SPC & Enter the current group and display the first article.\\
+ ? & Give a very short help message.\\
+ n & Go to the {\bf next} group. [distance]\\
+ p & Go to the {\bf previous} group. [distance]\\
+ q & (l) {\bf Quit} browse mode.\\
+ u & Subscribe to the current group. [scope]\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\GroupUnplugged}{%
+ {\esamepage
+ \begin{keys}{J S}
+ J j & Toggle plugged-state.\\
+ J s & Fetch articles from all groups for offline-reading.\\
+ J u & Fetch all eligible articles from this group.\\
+ J S & \textbf{Send} all sendable messages in the drafts group.\\
+ %
+ J c & Enter \textbf{category} buffer.\\
+ J a & \textbf{Add} this group to an Agent category [p/p].\\
+ J r & \textbf{Remove} this group from its Agent category [p/p].\\
+ J Y & Synchronize flags changed while unplugged with remote server.\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\SummaryUnplugged}{%
+ {\esamepage
+ \begin{keys}{J M-\#}
+ J \# & \textbf{Mark} the article for downloading.\\
+ J M-\# & \textbf{Unmark} the article for downloading.\\
+ @ & \textbf{Toggle} whether to download the article.\\
+ J c & Mark all undownloaded articles as read (\textbf{catch-up}).\\
+ J u & Download all downloadable articles from group.\\
+ \end{keys}
+ }
+ }
+
+\newcommand{\ServerUnplugged}{%
+ {\esamepage
+ \begin{keys}{J a}
+ J a & \textbf{Add} the current server to the list of servers covered
+ by the agent.\\
+ J r & \textbf{Remove} the current server from the list of servers covered
+ by the agent.\\
+ \end{keys}
+ }
+ }
+
+% end {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
+
+
+% o some things might not be updated: scoring and server modes, maybe more
+% o Gnus Unplugged category-buffer commands need to be written
+
+\begin{document}
+
+\ifthenelse{\isundefined{\booklettrue}}{ % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \raggedbottom\raggedright
+ \twocolumn
+ % use \tiny to shrink it to 4 pages (needs a high-resolution printer though)
+ % \tiny
+ \scriptsize
+ \pagestyle{plain}
+ \Title
+ \par
+ \Logo{refcard}
+}{
+ \setcounter{page}{0}
+ \thispagestyle{empty}
+ \vspace*{\fill}
+ \Title
+ \vspace{0.4in}
+ \Logo{booklet}
+ \vspace*{\fill}
+ \pagebreak
+}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% TODO: how does this work ?
+%\tableofcontents
+
+\Notes
+%
+
+\section*{Group-Mode}
+\GroupModeGeneral
+ \subsection*{Group Subscribedness-Levels}
+ \GroupLevels
+ \subsection*{List Groups}
+ \ListGroups
+ \subsection*{Create/Edit Foreign Groups}
+ \CreateEditGroups
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
+ \subsection*{Unsubscribe, Kill and Yank Groups}
+ \SubscribeKillYankGroups
+ \subsection*{Mark Groups}
+ \MarkGroups
+ \subsection*{Group-Unplugged}
+ \GroupUnplugged
+% topics in group-mode
+ \subsection*{Group Topics}
+ \GroupTopicsGeneral
+ \subsubsection*{Topic Sorting}
+ \TopicSorting
+
+% \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
+
+% summary-mode
+\section*{Summary Mode}
+\SummaryModeGeneral
+ \subsection*{Select Articles}
+ \SelectArticles
+%
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
+ \subsection*{Threading}
+ \Threading
+%
+ \subsection*{Limiting}
+ \Limiting
+ \subsection*{Sort the Summary-Buffer}
+ \SortSummary
+ \subsection*{Score (Value) Commands}
+ \Scoring
+
+\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \subsection*{Output Articles}
+ \OutputArticles
+ \subsection*{Extract Series (Uudecode etc)}
+ \ExtractSeries
+}{}%ifcard% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ \subsection*{MIME operations from the Summary-Buffer}
+ \MIMESummary
+
+\ifthenelse{\isundefined{\booklettrue}}{}{% ifbooklet %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \subsection*{Extract Series (Uudecode etc)}
+ \ExtractSeries
+ \subsection*{Output Articles}
+ \OutputArticles
+}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%
+ \subsection*{Post, Followup, Reply, Forward, Cancel}
+ \PostReplyetc
+
+\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% newpage ifcard
+
+ \subsection*{Message Composition}
+
+ \MsgCompositionGeneral
+ \subsubsection*{Jumping in message-buffer}
+ \MsgCompositionMovementArticle
+ \subsubsection*{Attachments/MML}
+ \MsgCompositionMML
+% marking articles
+ \subsection*{Mark Articles}
+ \MarkArticlesGeneral
+ \subsubsection*{Mark Based on Score}
+ \MarkByScore
+ \subsubsection*{The Process Mark}
+ \ProcessMark
+ \subsubsection*{Mark Indication-Characters}
+ \MarkCharacters
+%
+%\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}%
+ \newpage
+ \subsection*{Summary-Unplugged}
+ \SummaryUnplugged
+ \subsection*{Mail-Group Commands}
+ \MailGroups
+ \subsection*{Draft-Group Commands}
+ \DraftGroup
+% exiting
+ \subsection*{Exit the Summary-Buffer}
+ \ExitSummary
+%
+%
+\section*{Article Mode (reading)}
+\ArticleModeGeneral
+ \subsection*{Wash the Article-Buffer}
+ \WashArticle
+ \subsubsection*{Blank Lines and Whitespace}
+ \BlankAndWhitespace
+ \subsubsection*{Picons, X-faces, Smileys}
+ \Picons
+ \subsubsection*{Time and Date}
+ \TimeAndDate
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
+ \subsection*{Hide/Highlight Parts of the Article}
+ \HideHighlightArticle
+ \subsection*{MIME operations from the Article-Buffer (reading)}
+ \MIMEArticleMode
+%
+%
+\ifthenelse{\isundefined{\booklettrue}}{\pagebreak}{}%
+\section*{Server Mode}
+\ServerMode
+ \subsection*{Unplugged-Server}
+ \ServerUnplugged
+%
+%
+\section*{Browse Server Mode}
+\BrowseServer
+
+%\pagebreak
+\vspace*{\fill}
+\Copyright
+
+\end{document}
+
+%%% Local Variables:
+%%% mode: latex
+%%% TeX-master: t
+%%% End:
projects / packages / blobdiff