This file documents Message, the Emacs message composition mode.
-Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1996, 1997, 1998, 1999, 2000, 2001, 2002
+Copyright @copyright{} 1996, 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@code{message-wide-reply-to-function}. It is used in the same way as
@code{message-reply-to-function} (@pxref{Reply}).
-@findex message-dont-reply-to-names
+@vindex message-dont-reply-to-names
Addresses that match the @code{message-dont-reply-to-names} regular
expression will be removed from the @code{Cc} header.
+@vindex message-wide-reply-confirm-recipients
+If @code{message-wide-reply-confirm-recipients} is non-@code{nil} you
+will be asked to confirm that you want to reply to multiple
+recipients. The default is @code{nil}.
@node Followup
@section Followup
The @code{message-cancel-news} command cancels the article in the
current buffer.
+@vindex message-cancel-message
+The value of @code{message-cancel-message} is inserted in the body of
+the cancel message. The default is @samp{I am canceling my own
+article.}.
+
+@cindex Cancel Locks
+@vindex message-insert-canlock
+@cindex canlock
+When Message posts news messages, it inserts @code{Cancel-Lock}
+headers by default. This is a cryptographic header that ensures that
+only you can cancel your own messages, which is nice. The downside
+is that if you lose your @file{.emacs} file (which is where Gnus
+stores the secret cancel lock password (which is generated
+automatically the first time you use this feature)), you won't be
+able to cancel your message.
+
+Whether to insert the header or not is controlled by the
+@code{message-insert-canlock} variable.
+
+Not many news servers respect the @code{Cancel-Lock} header yet, but
+this is expected to change in the future.
+
@node Superseding
@section Superseding
included as inline @sc{mime} RFC822 parts. If it's @code{nil}, forwarded
messages will just be copied inline to the new message, like previous,
non @sc{mime}-savvy versions of gnus would do.
+
+@item message-forward-before-signature
+@vindex message-forward-before-signature
+If non-@code{nil}, put forwarded message before signature, else after.
+
@end table
@vindex message-subscribed-addresses
@item message-subscribed-addresses
This should be a list of addresses the user is subscribed to. Its
-default value is @code{nil}. Example:
+default value is @code{nil}. Example:
@lisp
-(setq message-subscribed-addresses
+(setq message-subscribed-addresses
'("ding@@gnus.org" "bing@@noose.org"))
@end lisp
'(gnus-find-subscribed-addresses))
@end lisp
+@vindex message-subscribed-address-file
@item message-subscribed-address-file
You might be one organised human freak and have a list of addresses of
all subscribed mailing lists in a separate file! Then you can just
address, then no MFT is generated; otherwise, a MFT is added to the
other headers and set to the value of all addresses in To: and Cc:
+@kindex C-c C-f C-a
+@findex message-generate-unsubscribed-mail-followup-to
+@kindex C-c C-f C-m
+@findex message-goto-mail-followup-to
Hm. ``So'', you ask, ``what if I send an email to a list I am not
subscribed to? I want my MFT to say that I want an extra copy.'' (This
is supposed to be interpreted by others the same way as if there were no
MFT, but you can use an explicit MFT to override someone else's
-to-address group parameter.) Well, the kind folks at Gnus Towers are
-working on a database of all known mailing list addresses that can be
-used for this purpose. Till then, you could, like, insert a MFT header
-manually, with the help of @kbd{C-c C-f C-m} !!
+to-address group parameter.) The function
+@code{message-generate-unsubscribed-mail-followup-to} might come in
+handy. It is bound to @kbd{C-c C-f C-a} by default. In any case, you
+can insert a MFT of your own choice; @kbd{C-c C-f C-m}
+(@code{message-goto-mail-followup-to}) will help you get started.
@c @node Honoring an MFT post
@subsection Honoring an MFT post
@menu
* Buffer Entry:: Commands after entering a Message buffer.
-* Header Commands:: Commands for moving to headers.
+* Header Commands:: Commands for moving headers or changing headers.
* Movement:: Moving around in message buffers.
* Insertion:: Inserting things into message buffers.
* MIME:: @sc{mime} considerations.
@node Header Commands
@section Header Commands
-All these commands move to the header in question (except for the
-@samp{Importance:} related commands). If it doesn't exist, it will be
-inserted.
+@subsection Commands for moving to headers
+
+These following commands move to the header in question. If it doesn't
+exist, it will be inserted.
@table @kbd
buffer, it cycles between the three valid values according to RFC
1376: @samp{low}, @samp{normal} and @samp{high}.
+@item C-c C-f C-a
+@kindex C-c C-f C-a
+@findex message-generate-unsubscribed-mail-followup-to
+Insert a reasonable @samp{Mail-Followup-To:} header
+(@pxref{Mailing Lists}) in a post to an
+unsubscribed list. When making original posts to a mailing list you are
+not subscribed to, you have to type in a @samp{Mail-Followup-To:} header
+by hand. The contents, usually, are the addresses of the list and your
+own address. This function inserts such a header automatically. It
+fetches the contents of the @samp{To:} header in the current mail
+buffer, and appends the current @code{user-mail-address}.
+
+If the optional argument @code{include-cc} is non-nil, the addresses in
+the @samp{Cc:} header are also put into the @samp{Mail-Followup-To:}
+header.
+
+@end table
+
+@subsection Commands to change headers
+
+@table @kbd
+
+@item C-c C-o
+@kindex C-c C-o
+@findex message-sort-headers
+@vindex message-header-format-alist
+Sort headers according to @code{message-header-format-alist}
+(@code{message-sort-headers}).
+
+@item C-c C-t
+@kindex C-c C-t
+@findex message-insert-to
+Insert a @code{To} header that contains the @code{Reply-To} or
+@code{From} header of the message you're following up
+(@code{message-insert-to}).
+
+@item C-c C-n
+@kindex C-c C-n
+@findex message-insert-newsgroups
+Insert a @code{Newsgroups} header that reflects the @code{Followup-To}
+or @code{Newsgroups} header of the article you're replying to
+(@code{message-insert-newsgroups}).
+
+@item C-c C-l
+@kindex C-c C-l
+@findex message-to-list-only
+Send a message to the list only. Remove all addresses but the list
+address from @code{To:} and @code{Cc:} headers.
+
+@item C-c M-n
+@kindex C-c M-n
+@findex message-insert-disposition-notification-to
+Insert a request for a disposition
+notification. (@code{message-insert-disposition-notification-to}).
+This means that if the recipient support RFC 2298 she might send you a
+notification that she received the message.
+
@item M-x message-insert-importance-high
@kindex M-x message-insert-importance-high
@findex message-insert-importance-high
-Insert a @samp{Importance:} header with a value of @samp{high},
+@cindex Importance
+Insert an @samp{Importance} header with a value of @samp{high},
deleting headers if necessary.
@item M-x message-insert-importance-low
@kindex M-x message-insert-importance-low
@findex message-insert-importance-low
-Insert a @samp{Importance:} header with a value of @samp{low},
-deleting headers if necessary.
+@cindex Importance
+Insert an @samp{Importance} header with a value of @samp{low}, deleting
+headers if necessary.
+
+@item C-c C-f s
+@kindex C-c C-f s
+@findex message-change-subject
+@cindex Subject
+Change the current @samp{Subject} header. Ask for new @samp{Subject}
+header and append @code{(was: <Old Subject>)}. The old subject can be
+stripped on replying, see @code{message-subject-trailing-was-query}
+(@pxref{Message Headers}).
+
+@item C-c C-f x
+@kindex C-c C-f x
+@findex message-cross-post-followup-to
+@vindex message-cross-post-default
+@cindex X-Post
+@cindex cross-post
+Ask for an additional @samp{Newsgroups} and @samp{FollowUp-To} for a
+cross-post. @code{message-cross-post-followup-to} mangles
+@samp{FollowUp-To} and @samp{Newsgroups} header to point to group.
+If @code{message-cross-post-default} is @code{nil} or if called with a
+prefix-argument @samp{Follow-Up} is set, but the message is not
+cross-posted.
+
+@item C-c C-f t
+@kindex C-c C-f t
+@findex message-reduce-to-to-cc
+Replace contents of @samp{To} header with contents of @samp{Cc} or
+@samp{Bcc} header.
+
+@item C-c C-f w
+@kindex C-c C-f w
+@findex message-insert-wide-reply
+Insert @samp{To} and @samp{Cc} headers as if you were doing a wide
+reply.
+
+@item C-c C-f a
+@kindex C-c C-f a
+@findex message-add-archive-header
+@vindex message-archive-header
+@vindex message-archive-note
+@cindex X-No-Archive
+Insert @samp{X-No-Archive: Yes} in the header and a note in the body.
+The header and the note can be customized using
+@code{message-archive-header} and @code{message-archive-note}. When
+called with a prefix argument, ask for a text to insert. If you don't
+want the note in the body, set @code{message-archive-note} to
+@code{nil}.
@end table
@item C-a
@kindex C-a
@findex message-beginning-of-line
+@vindex message-beginning-of-line
If at beginning of header value, go to beginning of line, else go to
beginning of header value. (The header value comes after the header
-name and the colon.)
+name and the colon.) This behaviour can be disabled by toggling
+the variable @code{message-beginning-of-line}.
@end table
@findex message-insert-headers
Insert the message headers (@code{message-insert-headers}).
-@item C-c M-n
-@kindex C-c M-n
-@findex message-insert-disposition-notification-to
-Insert a request for a disposition
-notification. (@code{message-insert-disposition-notification-to}).
-This means that if the recipient support RFC 2298 she might send you a
-notification that she received the message.
+@item C-c M-m
+@kindex C-c M-m
+@findex message-mark-inserted-region
+Mark some region in the current article with enclosing tags.
+See @code{message-mark-insert-begin} and @code{message-mark-insert-end}.
+
+@item C-c M-f
+@kindex C-c M-f
+@findex message-mark-insert-file
+Insert a file in the current article with enclosing tags.
+See @code{message-mark-insert-begin} and @code{message-mark-insert-end}.
@end table
Digitally encrypt current message using @sc{pgp/mime}.
+@item C-c C-m C-n
+@kindex C-c C-m C-n
+@findex mml-unsecure-message
+Remove security related MML tags from message.
+
@end table
These commands do not immediately sign or encrypt the message, they
message a single part tag will be used. This way, message mode will
do the Right Thing (TM) with signed/encrypted multipart messages.
+@vindex mml-signencrypt-style-alist
+By default, when encrypting a message, Gnus will use the "signencrypt"
+mode. If you would like to disable this for a particular message,
+give the mml-secure-message-encrypt-* command a prefix argument. (for
+example, C-u C-c C-m c p). Additionally, by default Gnus will
+separately sign, then encrypt a message which has the mode
+signencrypt. If you would like to change this behavior you can
+customize the @code{mml-signencrypt-style-alist} variable. For
+example:
+
+
+@lisp
+(setq mml-signencrypt-style-alist '(("smime" combined)
+ ("pgp" combined)
+ ("pgpmime" combined)))
+@end lisp
+
+Will cause Gnus to sign and encrypt in one pass, thus generating a
+single signed and encrypted part. Note that combined sign and encrypt
+does not work with all supported OpenPGP implementations (in
+particular, PGP version 2 do not support this).
+
Since signing and especially encryption often is used when sensitive
information is sent, you may want to have some way to ensure that your
mail is actually signed or encrypted. After invoking the above
@subsection Using PGP/MIME
@sc{pgp/mime} requires an external OpenPGP implementation, such as GNU
-Privacy Guard (@uref{http://www.gnupg.org/}). It also requires an
-Emacs interface to it, such as Mailcrypt (available from
-@uref{http://www.nb.net/~lbudney/linux/software/mailcrypt.html}) or
-Florian Weimer's @code{gpg.el}.
+Privacy Guard (@uref{http://www.gnupg.org/}). One Emacs interface to
+OpenPGP implementations, PGG (@pxref{Top, ,PGG, pgg, PGG Manual}), is
+included, but Mailcrypt and Florian Weimer's @code{gpg.el} are also
+supported.
@vindex gpg-temp-directory
Note, if you are using the @code{gpg.el} you must make sure that the
-path specified by @code{gpg-temp-directory} have permissions 0700.
+directory specified by @code{gpg-temp-directory} have permissions 0700.
Creating your own OpenPGP key is described in detail in the
documentation of your OpenPGP implementation, so we refer to it.
@item C-c C-e
@kindex C-c C-e
@findex message-elide-region
+@vindex message-elide-ellipsis
Elide the text between point and mark (@code{message-elide-region}).
The text is killed and replaced with the contents of the variable
@code{message-elide-ellipsis}. The default value is to use an ellipsis
@samp{*} says where point will be placed.
-@item C-c C-t
-@kindex C-c C-t
-@findex message-insert-to
-Insert a @code{To} header that contains the @code{Reply-To} or
-@code{From} header of the message you're following up
-(@code{message-insert-to}).
-
-@item C-c C-n
-@kindex C-c C-n
-@findex message-insert-newsgroups
-Insert a @code{Newsgroups} header that reflects the @code{Followup-To}
-or @code{Newsgroups} header of the article you're replying to
-(@code{message-insert-newsgroups}).
-
@item C-c M-r
@kindex C-c M-r
@findex message-rename-buffer
Rename the buffer (@code{message-rename-buffer}). If given a prefix,
prompt for a new buffer name.
+@item TAB
+@kindex TAB
+@findex message-tab
+@vindex message-tab-body-function
+If non-@code{nil} execute the function specified in
+@code{message-tab-body-function}. Otherwise use the function bound to
+@kbd{TAB} in @code{text-mode-map} or @code{global-map}.
+
@end table
@item message-generate-headers-first
@vindex message-generate-headers-first
-If non-@code{nil}, generate all required headers before starting to
-compose the message.
+If @code{t}, generate all required headers before starting to
+compose the message. This can also be a list of headers to generate:
-The variables @code{message-required-mail-headers} and
-@code{message-required-news-headers} specify which headers are required.
+@lisp
+(setq message-generate-headers-first
+ '(References))
+@end lisp
+
+@vindex message-required-headers
+The variables @code{message-required-headers},
+@code{message-required-mail-headers} and
+@code{message-required-news-headers} specify which headers are
+required.
Note that some headers will be removed and re-generated before posting,
because of the variable @code{message-deletable-headers} (see below).
+@item message-draft-headers
+@vindex message-draft-headers
+When running Message from Gnus, the message buffers are associated
+with a draft group. @code{message-draft-headers} says which headers
+should be generated when a draft is written to the draft group.
+
@item message-from-style
@vindex message-from-style
Specifies how @code{From} headers should look. There are four valid
@item message-subject-re-regexp
@vindex message-subject-re-regexp
-@cindex Aw:
-@cindex Sv:
-@cindex Re:
+@cindex Aw
+@cindex Sv
+@cindex Re
Responses to messages have subjects that start with @samp{Re: }. This
is @emph{not} an abbreviation of the English word ``response'', but is
Latin, and means ``in response to''. Some illiterate nincompoops have
@lisp
(setq message-subject-re-regexp
- "^\\(\\(\\([Rr][Ee]\\|[Ss][Vv]\\|[Aa][Ww]\\): *\\)+\\))
+ "^\\(\\(\\([Rr][Ee]\\|[Ss][Vv]\\|[Aa][Ww]\\): *\\)+\\)")
@end lisp
+@item message-subject-trailing-was-query
+@vindex message-subject-trailing-was-query
+@vindex message-subject-trailing-was-ask-regexp
+@vindex message-subject-trailing-was-regexp
+Controls what to do with trailing @samp{(was: <old subject>)} in subject
+lines. If @code{nil}, leave the subject unchanged. If it is the symbol
+@code{ask}, query the user what do do. In this case, the subject is
+matched against @code{message-subject-trailing-was-ask-regexp}. If
+@code{message-subject-trailing-was-query} is t, always strip the
+trailing old subject. In this case,
+@code{message-subject-trailing-was-regexp} is used.
+
@item message-alternative-emails
@vindex message-alternative-emails
A regexp to match the alternative email addresses. The first matched
address (not primary one) is used in the @code{From} field.
+@item message-allow-no-recipients
+@vindex message-allow-no-recipients
+Specifies what to do when there are no recipients other than
+@code{Gcc} or @code{Fcc}. If it is @code{always}, the posting is
+allowed. If it is @code{never}, the posting is not allowed. If it is
+@code{ask} (the default), you are prompted.
+
@end table
@findex message-send-mail-with-sendmail
@findex message-send-mail-with-mh
@findex message-send-mail-with-qmail
+@findex message-smtpmail-send-it
@findex smtpmail-send-it
@findex feedmail-send-it
Function used to send the current buffer as mail. The default is
@code{message-send-mail-with-sendmail}. Other valid values include
@code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
-@code{smtpmail-send-it} and @code{feedmail-send-it}.
+@code{message-smtpmail-send-it}, @code{smtpmail-send-it} and
+@code{feedmail-send-it}.
@item message-mh-deletable-headers
@vindex message-mh-deletable-headers
messages via MH. Set it to @code{nil} if your MH can handle these
headers.
+@item message-qmail-inject-program
+@vindex message-qmail-inject-program
+@cindex qmail
+Location of the qmail-inject program.
+
+@item message-qmail-inject-args
+@vindex message-qmail-inject-args
+Arguments passed to qmail-inject programs.
+This should be a list of strings, one string for each argument. It
+may also be a function.
+
+For e.g., if you wish to set the envelope sender address so that bounces
+go to the right place or to deal with listserv's usage of that address, you
+might set this variable to @code{'("-f" "you@@some.where")}.
+
+@item message-sendmail-f-is-evil
+@vindex message-sendmail-f-is-evil
+@cindex sendmail
+Non-@code{nil} means don't add @samp{-f username} to the sendmail
+command line. Doing so would be even more evil than leaving it out.
+
+@item message-mailer-swallows-blank-line
+@vindex message-mailer-swallows-blank-line
+Set this to non-@code{nil} if the system's mailer runs the header and
+body together. (This problem exists on Sunos 4 when sendmail is run
+in remote mode.) The value should be an expression to test whether
+the problem will actually occur.
+
@item message-send-mail-partially-limit
@vindex message-send-mail-partially-limit
-The limitation of messages sent as message/partial.
-The lower bound of message size in characters, beyond which the message
-should be sent in several parts. If it is nil, the size is unlimited.
+The limitation of messages sent as message/partial. The lower bound
+of message size in characters, beyond which the message should be sent
+in several parts. If it is @code{nil}, the size is unlimited.
@end table
@item Organization
@cindex organization
+@vindex message-user-organization
+@vindex message-user-organization-file
This optional header will be filled out depending on the
@code{message-user-organization} variable.
@code{message-user-organization-file} will be used if this variable is
@item Expires
@cindex Expires
+@vindex message-expires
This extremely optional header will be inserted according to the
@code{message-expires} variable. It is highly deprecated and shouldn't
be used unless you know what you're doing.
@item Distribution
@cindex Distribution
+@vindex message-distribution-function
This optional header is filled out according to the
@code{message-distribution-function} variable. It is a deprecated and
much misunderstood header.
@item Path
@cindex path
+@vindex message-user-path
This extremely optional header should probably never be used.
However, some @emph{very} old servers require that this header is
present. @code{message-user-path} further controls how this
@code{optional}, the cdr of this cons will only be inserted if it is
non-@code{nil}.
+If you want to delete an entry from this list, the following Lisp
+snippet might be useful. Adjust accordingly if you want to remove
+another element.
+
+@lisp
+(setq message-required-news-headers
+ (delq 'Message-ID message-required-news-headers))
+@end lisp
+
Other variables for customizing outgoing news articles:
@table @code
citation between @code{(point)} and @code{(mark t)}. And each function
should leave point and mark around the citation text as modified.
+@item message-mark-insert-begin
+@vindex message-mark-insert-begin
+String to mark the beginning of some inserted text.
+
+@item message-mark-insert-end
+@vindex message-mark-insert-end
+String to mark the end of some inserted text.
+
@item message-signature
@vindex message-signature
String to be inserted at the end of the message buffer. If @code{t}
File containing the signature to be inserted at the end of the buffer.
The default is @file{~/.signature}.
+@item message-signature-insert-empty-line
+@vindex message-signature-insert-empty-line
+If @code{t} (the default value) an empty line is inserted before the
+signature separator.
+
@end table
Note that RFC1036bis says that a signature should be preceded by the three
Symbol naming a @sc{mime} charset. Non-ASCII characters in messages are
assumed to be encoded using this charset. The default is @code{nil},
which means ask the user. (This variable is used only on non-@sc{mule}
-Emacsen.
-@xref{Charset Translation, , Charset Translation, emacs-mime,
+Emacsen.
+@xref{Charset Translation, , Charset Translation, emacs-mime,
Emacs MIME Manual}, for details on the @sc{mule}-to-@sc{mime}
translation process.
@vindex message-directory
Directory used by many mailey things. The default is @file{~/Mail/}.
+@item message-auto-save-directory
+@vindex message-auto-save-directory
+Directory where Message auto-saves buffers if Gnus isn't running. If
+@code{nil}, Message won't auto-save. The default is @file{~/Mail/drafts/}.
+
@item message-signature-setup-hook
@vindex message-signature-setup-hook
Hook run when initializing the message buffer. It is run after the
@item message-send-mail-hook
@vindex message-send-mail-hook
-Hook run before sending mail messages.
+Hook run before sending mail messages. This hook is run very late --
+just before the message is actually sent as news.
@item message-send-news-hook
@vindex message-send-news-hook
-Hook run before sending news messages.
+Hook run before sending news messages. This hook is run very late --
+just before the message is actually sent as news.
@item message-sent-hook
@vindex message-sent-hook
Hook run after sending messages.
+@item message-cancel-hook
+@vindex message-cancel-hook
+Hook run when cancelling news articles.
+
@item message-mode-syntax-table
@vindex message-mode-syntax-table
Syntax table used in message mode buffers.
+@item message-strip-special-text-properties
+@vindex message-strip-special-text-properties
+Emacs has a number of special text properties which can break message
+composing in various ways. If this option is set, message will strip
+these properties from the message composition buffer. However, some
+packages requires these properties to be present in order to work. If
+you use one of these packages, turn this option off, and hope the
+message composition doesn't break too bad.
+
@item message-send-method-alist
@vindex message-send-method-alist
an article\\nthat has been posted to %s as well.\\n\\n"}.
@item message-fcc-externalize-attachments
-@vindex message-gcc-externalize-attachments
+@vindex message-fcc-externalize-attachments
If @code{nil}, attach files as normal parts in Fcc copies; if it is
non-@code{nil}, attach local files as external parts.
+@item message-interactive
+@vindex message-interactive
+If non-@code{nil} wait for and display errors when sending a message;
+if @code{nil} let the mailer mail back a message to report errors.
+
@end table
projects / gnus / blobdiff