* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendinitis in ten easy steps!
* Daemons:: Gnus can do things behind your back.
* Undo:: Some actions can be undone.
* Predicate Specifiers:: Specifying predicates.
* Smileys:: Show all those happy faces the way they were
meant to be shown.
* Picons:: How to display pictures of what you're reading.
+* Gravatars:: Display the avatar of people you read.
* XVarious:: Other XEmacsy Gnusey variables.
Thwarting Email Spam
If that fails as well, Gnus will try to use the machine running Emacs
as an @acronym{NNTP} server. That's a long shot, though.
-@vindex gnus-nntp-server
-If @code{gnus-nntp-server} is set, this variable will override
-@code{gnus-select-method}. You should therefore set
-@code{gnus-nntp-server} to @code{nil}, which is what it is by default.
-
-@vindex gnus-secondary-servers
-@vindex gnus-nntp-server
-You can also make Gnus prompt you interactively for the name of an
-@acronym{NNTP} server. If you give a non-numerical prefix to @code{gnus}
-(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
-in the @code{gnus-secondary-servers} list (if any). You can also just
-type in the name of any server you feel like visiting. (Note that this
-will set @code{gnus-nntp-server}, which means that if you then @kbd{M-x
-gnus} later in the same Emacs session, Gnus will contact the same
-server.)
-
@findex gnus-group-browse-foreign-server
@kindex B (Group)
However, if you use one @acronym{NNTP} server regularly and are just
@section Subscription Commands
@cindex subscription
+The following commands allow for managing your subscriptions in the
+Group buffer. If you want to subscribe to many groups, it's probably
+more convenient to go to the @ref{Server Buffer}, and choose the
+server there using @kbd{RET} or @kbd{SPC}. Then you'll have the
+commands listed in @ref{Browse Foreign Server} at hand.
+
@table @kbd
@item S t
All groups with a level less than or equal to
@code{gnus-group-default-list-level} will be listed in the group buffer
by default.
+This variable can also be a function. In that case, that function will
+be called and the result will be used as value.
+
@vindex gnus-group-list-inactive-groups
If @code{gnus-group-list-inactive-groups} is non-@code{nil}, non-active
Top, sieve, Emacs Sieve}.
@item (agent parameters)
-If the agent has been enabled, you can set any of the its parameters
-to control the behavior of the agent in individual groups. See Agent
+If the agent has been enabled, you can set any of its parameters to
+control the behavior of the agent in individual groups. See Agent
Parameters in @ref{Category Syntax}. Most users will choose to set
agent parameters in either an agent category or group topic to
minimize the configuration effort.
If fetching from the first site is unsuccessful, Gnus will attempt to go
through @code{gnus-group-faq-directory} and try to open them one by one.
-@item H C
-@kindex H C (Group)
-@findex gnus-group-fetch-control
-@vindex gnus-group-fetch-control-use-browse-url
-@cindex control message
-Fetch the control messages for the group from the archive at
-@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
-group if given a prefix argument.
-
-If @code{gnus-group-fetch-control-use-browse-url} is non-@code{nil},
-Gnus will open the control messages in a browser using
-@code{browse-url}. Otherwise they are fetched using @code{ange-ftp}
-and displayed in an ephemeral group.
-
-Note that the control messages are compressed. To use this command
-you need to turn on @code{auto-compression-mode} (@pxref{Compressed
-Files, ,Compressed Files, emacs, The Emacs Manual}).
-
@item H d
@itemx C-c C-d
@c @icon{gnus-group-describe-group}
@vindex gnus-summary-show-article-charset-alist
(Re)fetch the current article (@code{gnus-summary-show-article}). If
given a prefix, fetch the current article, but don't run any of the
-article treatment functions. This will give you a ``raw'' article, just
-the way it came from the server.
+article treatment functions. If given a prefix twice (i.e., @kbd{C-u
+C-u g'}), show a completely ``raw'' article, just the way it came from
+the server.
@cindex charset, view article with different charset
If given a numerical prefix, you can do semi-manual charset stuff.
corresponding regular expression in @code{gnus-article-banner-alist} is
used.
+For instance:
+
+@lisp
+(setq gnus-article-banner-alist
+ ((googleGroups .
+ "^\n*--~--~---------\\(.+\n\\)+")))
+@end lisp
+
Regardless of a group, you can hide things like advertisements only when
the sender of an article has a certain mail address specified in
@code{gnus-article-address-banner-alist}.
the charset defined in @code{gnus-summary-show-article-charset-alist}
(@pxref{Paging the Article}) will be used.
-@vindex gnus-article-wash-function
The default is to use the function specified by
@code{mm-text-html-renderer} (@pxref{Display Customization, ,Display
Customization, emacs-mime, The Emacs MIME Manual}) to convert the
-@acronym{HTML}, but this is controlled by the
-@code{gnus-article-wash-function} variable. Pre-defined functions you
-can use include:
+@acronym{HTML}. Pre-defined functions you can use include:
@table @code
-@item gnus-article-html
+@item shr
+Use Gnus simple html renderer.
+
+@item gnus-w3m
Use Gnus rendered based on w3m.
@item w3
@code{nnbabyl}, @code{nnmaildir}, @code{nnml}, are able to locate
articles from any groups, while @code{nnfolder}, and @code{nnimap} are
only able to locate articles that have been posted to the current
-group. (Anything else would be too time consuming.) @code{nnmh} does
-not support this at all.
+group. @code{nnmh} does not support this at all.
+Fortunately, the special @code{nnregistry} back end is able to locate
+articles in any groups, regardless of their back end (@pxref{Registry
+Article Refer Method, fetching by @code{Message-ID} using the
+registry}).
@node Alternative Approaches
@section Alternative Approaches
@item mm-text-html-renderer
@vindex mm-text-html-renderer
If set to @code{gnus-article-html}, Gnus will use the built-in method,
-that's based on @code{curl} and @code{w3m}.
+that's based on @code{w3m}.
@item gnus-blocked-images
@vindex gnus-blocked-images
-Images that have @acronym{URL}s that match this regexp won't be
-fetched and displayed. For instance, do block all @acronym{URL}s that
-have the string ``ads'' in them, do the following:
+External images that have @acronym{URL}s that match this regexp won't
+be fetched and displayed. For instance, do block all @acronym{URL}s
+that have the string ``ads'' in them, do the following:
@lisp
(setq gnus-blocked-images "ads")
@end lisp
-The default is to block all external images.
+This can also be a function to be evaluated. If so, it will be
+called with the group name as the parameter. The default value is
+@code{gnus-block-private-groups}, which will return @samp{"."} for
+anything that isn't a newsgroup. This means that no external images
+will be fetched as a result of reading mail, so that nobody can use
+web bugs (and the like) to track whether you've read email.
@item gnus-html-cache-directory
@vindex gnus-html-cache-directory
(This is the default.) If @code{nil}, each group will have its own
article buffer.
+@item gnus-widen-article-window
+@cindex gnus-widen-article-window
+If non-@code{nil}, selecting the article buffer with the @kbd{h}
+command will ``widen'' the article window to take the entire frame.
+
@vindex gnus-article-decode-hook
@item gnus-article-decode-hook
@cindex @acronym{MIME}
@item nnimap-server-port
If the server uses a non-standard port, that can be specified here. A
-typical port would be @samp{imap} or @samp{imaps}.
+typical port would be @code{"imap"} or @code{"imaps"}.
@item nnimap-stream
How @code{nnimap} should connect to the server. Possible values are:
Mail}), except the symbol @code{default}, which means that it should
use the value of the @code{nnmail-split-methods} variable.
+@item nnimap-split-fancy
+Uses the same syntax as @code{nnmail-split-fancy}.
+
+@item nnimap-unsplittable-articles
+List of flag symbols to ignore when doing splitting. That is,
+articles that have these flags won't be considered when splitting.
+The default is @samp{(%Deleted %Seen)}.
+
@end table
message. The function should return a list of group names that it
thinks should carry this mail message.
+This variable can also be a fancy split method. For the syntax,
+see @ref{Fancy Mail Splitting}.
+
Note that the mail back ends are free to maul the poor, innocent,
incoming headers all they want to. They all add @code{Lines} headers;
some add @code{X-Gnus-Group} headers; most rename the Unix mbox
mail back ends.
@code{nnmaildir} is largely similar to @code{nnml}, with some notable
-differences. Each message is stored in a separate file, but the
-filename is unrelated to the article number in Gnus. @code{nnmaildir}
+differences. Each message is stored in a separate file, but the
+filename is unrelated to the article number in Gnus. @code{nnmaildir}
also stores the equivalent of @code{nnml}'s overview files in one file
-per article, so it uses about twice as many inodes as @code{nnml}. (Use
-@code{df -i} to see how plentiful your inode supply is.) If this slows
-you down or takes up very much space, consider switching to
-@uref{http://www.namesys.com/, ReiserFS} or another non-block-structured
+per article, so it uses about twice as many inodes as @code{nnml}.
+(Use @code{df -i} to see how plentiful your inode supply is.) If this
+slows you down or takes up very much space, a non-block-structured
file system.
Since maildirs don't require locking for delivery, the maildirs you use
the feeds from local files in @code{nnrss-directory}. You can use
the command @code{nnrss-generate-download-script} to generate a
download script using @command{wget}.
-
-@item nnrss-wash-html-in-text-plain-parts
-Non-@code{nil} means that @code{nnrss} renders text in @samp{text/plain}
-parts as @acronym{HTML}. The function specified by the
-@code{mm-text-html-renderer} variable (@pxref{Display Customization,
-,Display Customization, emacs-mime, The Emacs MIME Manual}) will be used
-to render text. If it is @code{nil}, which is the default, text will
-simply be folded. Leave it @code{nil} if you prefer to see
-@samp{text/html} parts.
@end table
The following code may be helpful, if you want to show the description in
@item lanl-gov-announce
Announcement messages from LANL Gov Announce.
+@cindex git commit messages
+@item git
+@code{git} commit messages.
+
@cindex forwarded messages
@item rfc822-forward
A message forwarded according to RFC822.
* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendinitis in ten easy steps!
* Daemons:: Gnus can do things behind your back.
* Undo:: Some actions can be undone.
* Predicate Specifiers:: Specifying predicates.
buffer should be given. Here's an excerpt of this variable:
@lisp
-((group (vertical 1.0 (group 1.0 point)
- (if gnus-carpal (group-carpal 4))))
+((group (vertical 1.0 (group 1.0 point)))
(article (vertical 1.0 (summary 0.25 point)
(article 1.0))))
@end lisp
@lisp
(article (vertical 1.0 (group 4)
(summary 0.25 point)
- (if gnus-carpal (summary-carpal 4))
(article 1.0)))
@end lisp
If the @dfn{split} looks like something that can be @code{eval}ed (to be
precise---if the @code{car} of the split is a function or a subr), this
split will be @code{eval}ed. If the result is non-@code{nil}, it will
-be used as a split. This means that there will be three buffers if
-@code{gnus-carpal} is @code{nil}, and four buffers if @code{gnus-carpal}
-is non-@code{nil}.
+be used as a split.
Not complicated enough for you? Well, try this on for size:
@lisp
(article (horizontal 1.0
(vertical 0.5
- (group 1.0)
- (gnus-carpal 4))
+ (group 1.0))
(vertical 1.0
(summary 0.25 point)
- (summary-carpal 4)
(article 1.0))))
@end lisp
@end table
-@node Buttons
-@section Buttons
-@cindex buttons
-@cindex mouse
-@cindex click
-
-Those new-fangled @dfn{mouse} contraptions is very popular with the
-young, hep kids who don't want to learn the proper way to do things
-these days. Why, I remember way back in the summer of '89, when I was
-using Emacs on a Tops 20 system. Three hundred users on one single
-machine, and every user was running Simula compilers. Bah!
-
-Right.
-
-@vindex gnus-carpal
-Well, you can make Gnus display bufferfuls of buttons you can click to
-do anything by setting @code{gnus-carpal} to @code{t}. Pretty simple,
-really. Tell the chiropractor I sent you.
-
-
-@table @code
-
-@item gnus-carpal-mode-hook
-@vindex gnus-carpal-mode-hook
-Hook run in all carpal mode buffers.
-
-@item gnus-carpal-button-face
-@vindex gnus-carpal-button-face
-Face used on buttons.
-
-@item gnus-carpal-header-face
-@vindex gnus-carpal-header-face
-Face used on carpal buffer headers.
-
-@item gnus-carpal-group-buffer-buttons
-@vindex gnus-carpal-group-buffer-buttons
-Buttons in the group buffer.
-
-@item gnus-carpal-summary-buffer-buttons
-@vindex gnus-carpal-summary-buffer-buttons
-Buttons in the summary buffer.
-
-@item gnus-carpal-server-buffer-buttons
-@vindex gnus-carpal-server-buffer-buttons
-Buttons in the server buffer.
-
-@item gnus-carpal-browse-buffer-buttons
-@vindex gnus-carpal-browse-buffer-buttons
-Buttons in the browse buffer.
-@end table
-
-All the @code{buttons} variables are lists. The elements in these list
-are either cons cells where the @code{car} contains a text to be displayed and
-the @code{cdr} contains a function symbol, or a simple string.
-
-
@node Daemons
@section Daemons
@cindex demons
@vindex gnus-gravatar-properties
List of image properties applied to Gravatar images.
+@item gnus-gravatar-too-ugly
+@vindex gnus-gravatar-too-ugly
+Regexp that matches mail addresses or names of people of which avatars
+should not be displayed, or @code{nil}. It default to the value of
+@code{gnus-article-x-face-too-ugly} (@pxref{X-Face}).
+
@end table
If you want to see them in the From field, set:
group:
@table @kbd
-@item M-d
+@item $
+@itemx M-d
@itemx M s x
@itemx S x
-@kindex M-d
-@kindex S x
-@kindex M s x
+@kindex $ (Summary)
+@kindex M-d (Summary)
+@kindex S x (Summary)
+@kindex M s x (Summary)
@findex gnus-summary-mark-as-spam
@findex gnus-summary-mark-as-spam
Mark current article as spam, showing it with the @samp{$} mark
spam-move-spam-nonspam-groups-only nil
spam-mark-only-unseen-as-spam t
spam-mark-ham-unread-before-move-from-spam-group t
- nnimap-split-rule 'nnimap-split-fancy
;; @r{understand what this does before you copy it to your own setup!}
+ ;; @r{for nnimap you'll probably want to set nnimap-split-methods, see the manual}
nnimap-split-fancy '(|
;; @r{trace references to parents and put in their group}
(: gnus-registry-split-fancy-with-parent)
@example
(setq spam-use-spamoracle t
spam-split-group "Junk"
+ ;; @r{for nnimap you'll probably want to set nnimap-split-methods, see the manual}
nnimap-split-inbox '("INBOX")
- nnimap-split-rule 'nnimap-split-fancy
nnimap-split-fancy '(| (: spam-split) "INBOX"))
@end example
the sender in addition to the Message-ID. Several strategies are
available.
+@item
+Refer to messages by ID
+
+Commands like @code{gnus-summary-refer-parent-article} can take
+advantage of the registry to jump to the referred article, regardless
+of the group the message is in.
+
@item
Store custom flags and keywords
@menu
* Setup::
* Fancy splitting to parent::
+* Registry Article Refer Method::
* Store custom flags and keywords::
* Store arbitrary data::
@end menu
The file where the registry will be stored between Gnus sessions.
@end defvar
+@node Registry Article Refer Method
+@subsection Fetching by @code{Message-ID} Using the Registry
+
+The registry knows how to map each @code{Message-ID} to the group it's
+in. This can be leveraged to enhance the ``article refer method'',
+the thing that tells Gnus how to look up an article given its
+Message-ID (@pxref{Finding the Parent}).
+
+@vindex nnregistry
+@vindex gnus-refer-article-method
+
+The @code{nnregistry} refer method does exactly that. It has the
+advantage that an article may be found regardless of the group it's
+in---provided its @code{Message-ID} is known to the registry. It can
+be enabled by augmenting the start-up file with something along these
+lines:
+
+@example
+;; Keep enough entries to have a good hit rate when referring to an
+;; article using the registry. Use long group names so that Gnus
+;; knows where the article is.
+(setq gnus-registry-max-entries 2500
+ gnus-registry-use-long-group-names t)
+
+(gnus-registry-initialize)
+
+(setq gnus-refer-article-method
+ '(current
+ (nnregistry)
+ (nnweb "gmane" (nnweb-type gmane))))
+@end example
+
+The example above instructs Gnus to first look up the article in the
+current group, or, alternatively, using the registry, and finally, if
+all else fails, using Gmane.
+
@node Fancy splitting to parent
@subsection Fancy splitting to parent
You can do lots of strange stuff with the Gnus window & frame
configuration (@pxref{Window Layout}).
-@item
-You can click on buttons instead of using the keyboard
-(@pxref{Buttons}).
-
@end itemize
(setq gnus-read-active-file 'some)
@end lisp
-On the other hand, if the manual says ``set @code{gnus-nntp-server} to
-@samp{nntp.ifi.uio.no}'', that means:
+On the other hand, if the manual says ``set @code{gnus-nntp-server-file} to
+@samp{/etc/nntpserver}'', that means:
@lisp
-(setq gnus-nntp-server "nntp.ifi.uio.no")
+(setq gnus-nntp-server-file "/etc/nntpserver")
@end lisp
So be careful not to mix up strings (the latter) with symbols (the
projects / gnus / blobdiff