Use the normal HTML rendering code instead of the special HTML washing code.

[gnus] / texi / gnus-news.texi

diff --git a/texi/gnus-news.texi b/texi/gnus-news.texi
index 4b33b14..1136d52 100644 (file)
--- a/texi/gnus-news.texi
+++ b/texi/gnus-news.texi
@@ -1,6 +1,6 @@
 @c -*-texinfo-*-
 
 @c -*-texinfo-*-
 

-@c Copyright (C) 2004, 2005, 2006 Free Software Foundation, Inc.
+@c Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

 
 @c    Permission is granted to anyone to make or distribute verbatim copies
 @c    of this document as received, in any medium, provided that the
 
 @c    Permission is granted to anyone to make or distribute verbatim copies
 @c    of this document as received, in any medium, provided that the


@@ -18,7 +18,18 @@
 
 @itemize @bullet
 
 
 @itemize @bullet
 

-@item Installation changes in No Gnus
+@item Supported Emacs versions
+The following Emacs versions are supported by No Gnus:
+@itemize @bullet
+
+@item Emacs 22 and up
+@item XEmacs 21.4
+@item XEmacs 21.5
+@item SXEmacs
+
+@end itemize
+
+@item Installation changes

 
 @itemize @bullet
 @item Upgrading from previous (stable) version if you have used No Gnus.
 
 @itemize @bullet
 @item Upgrading from previous (stable) version if you have used No Gnus.


@@ -32,27 +43,42 @@ file, where this release will store flags for nntp.  See a later entry
 for more information about nntp marks.  Note that downgrading isn't
 safe in general.
 
 for more information about nntp marks.  Note that downgrading isn't
 safe in general.
 

-@item Lisp files are now installed in .../site-lisp/gnus/ by default.
-It defaulted to .../site-lisp/ formerly.  In addition to this, the new
-installer issues a warning if other Gnus installations which will
-shadow the latest one are detected.  You can then remove those shadows
-manually or remove them using @samp{make remove-installed-shadows}.
+@item Incompatibility when switching from Emacs 23 to Emacs 22 
+In Emacs 23, Gnus uses Emacs' new internal coding system @code{utf-8-emacs}
+for saving articles drafts and @file{~/.newsrc.eld}.  These files may not
+be read correctly in Emacs 22 and below.  If you want to use Gnus across
+different Emacs versions, you may set @code{mm-auto-save-coding-system}
+to @code{emacs-mule}.
+@c FIXME: Untested.  (Or did anyone test it?)
+@c Cf. http://thread.gmane.org/gmane.emacs.gnus.general/66251/focus=66344
+
+@item Lisp files are now installed in @file{.../site-lisp/gnus/} by default.
+It defaulted to @file{.../site-lisp/} formerly.  In addition to this,
+the new installer issues a warning if other Gnus installations which
+will shadow the latest one are detected.  You can then remove those
+shadows manually or remove them using @code{make
+remove-installed-shadows}.
+
+@item The installation directory name is allowed to have spaces and/or tabs.

 @end itemize
 
 @end itemize
 

-@item Major new features in No Gnus
+@item New packages and libraries within Gnus

 
 @itemize @bullet
 
 @itemize @bullet

-@item International host names (@acronym{IDNA}) can now be decoded
-inside article bodies using @kbd{W i}
-(@code{gnus-summary-idna-message}).  This requires that GNU Libidn
-(@url{http://www.gnu.org/software/libidn/}) has been installed.

 
 

-@item Gnus includes an Emacs Lisp @acronym{SASL} library.
+@item New version of @code{nnimap}
+
+@code{nnimap} has been reimplemented in a mostly-compatible way.  See
+the Gnus manual for a description of the new interface.  In
+particular, @code{nnimap-inbox} and the client side split method has
+changed.
+
+@item Gnus includes the Emacs Lisp @acronym{SASL} library.

 
 This provides a clean @acronym{API} to @acronym{SASL} mechanisms from
 within Emacs.  The user visible aspects of this, compared to the earlier
 situation, include support for @acronym{DIGEST}-@acronym{MD5} and
 
 This provides a clean @acronym{API} to @acronym{SASL} mechanisms from
 within Emacs.  The user visible aspects of this, compared to the earlier
 situation, include support for @acronym{DIGEST}-@acronym{MD5} and

-@acronym{NTLM}.
+@acronym{NTLM}.   @xref{Top, ,Emacs SASL, sasl, Emacs SASL}.

 
 @item ManageSieve connections uses the @acronym{SASL} library by default.
 
 
 @item ManageSieve connections uses the @acronym{SASL} library by default.
 


@@ -68,19 +94,72 @@ passphrase is managed by this mechanism.  Passwords for ManageSieve
 connections are managed by this mechanism, after querying the user
 about whether to do so.
 
 connections are managed by this mechanism, after querying the user
 about whether to do so.
 

-@item The @file{all.SCORE} file can be edited from the group buffer
-using @kbd{W e}.
+@item Using EasyPG with Gnus
+When EasyPG, is available, Gnus will use it instead of @acronym{PGG}.
+EasyPG is an Emacs user interface to GNU Privacy Guard.  @xref{Top,
+,EasyPG Assistant user's manual, epa, EasyPG Assistant user's manual}.
+EasyPG is included in Emacs 23 and available separately as well.
+@end itemize

 
 

-@item Gnus now views DNS master files sent as text/dns using dns-mode.
+@item Changes in group mode
+@c ************************

 
 

-@item Gnus now supports the ``hashcash'' client puzzle anti-spam mechanism.
-See the Gnus manual, section Hashcash, for more information.  Use
-@code{(setq message-generate-hashcash t)} to enable.
+@itemize @bullet
+
+@item
+Symbols like @code{gcc-self} now has the same presedence rules in
+@code{gnus-parameters} as other ``real'' variables: The last match
+wins instead of the first match.
+
+@item
+Old intermediate incoming mail files (@file{Incoming*}) are deleted
+after a couple of days, not immediately.  @xref{Mail Source
+Customization}.
+(New in Gnus 5.10.10 / No Gnus 0.8)
+@c This entry is also present in the node "Oort Gnus".
+
+@end itemize
+
+@item Changes in summary and article mode
+
+@itemize @bullet
+
+@item Gnus now supports sticky article buffers.  Those are article buffers
+that are not reused when you select another article.  @xref{Sticky
+Articles}.
+
+@c @item Bookmarks
+@c FIXME: To be added
+
+@item Gnus can selectively display @samp{text/html} articles
+with a WWW browser with @kbd{K H}.  @xref{MIME Commands}.
+
+@c gnus-registry-marks
+@c FIXME: To be added
+
+@item International host names (@acronym{IDNA}) can now be decoded
+inside article bodies using @kbd{W i}
+(@code{gnus-summary-idna-message}).  This requires that GNU Libidn
+(@url{http://www.gnu.org/software/libidn/}) has been installed.
+@c FIXME: Also mention @code{message-use-idna}?
+
+@item The non-@acronym{ASCII} group names handling has been much
+improved.  The back ends that fully support non-@acronym{ASCII} group
+names are now @code{nntp}, @code{nnml}, and @code{nnrss}.  Also the
+agent, the cache, and the marks features work with those back ends.
+@xref{Non-ASCII Group Names}.
+
+@item Gnus now displays @acronym{DNS} master files sent as text/dns
+using dns-mode.

 
 @item Gnus supports new limiting commands in the Summary buffer:
 @kbd{/ r} (@code{gnus-summary-limit-to-replied}) and @kbd{/ R}
 (@code{gnus-summary-limit-to-recipient}).  @xref{Limiting}.
 
 
 @item Gnus supports new limiting commands in the Summary buffer:
 @kbd{/ r} (@code{gnus-summary-limit-to-replied}) and @kbd{/ R}
 (@code{gnus-summary-limit-to-recipient}).  @xref{Limiting}.
 

+@item You can now fetch all ticked articles from the server using
+@kbd{Y t} (@code{gnus-summary-insert-ticked-articles}).  @xref{Summary
+Generation Commands}.
+

 @item Gnus supports a new sort command in the Summary buffer:
 @kbd{C-c C-s C-t} (@code{gnus-summary-sort-by-recipient}).  @xref{Summary
 Sorting}.
 @item Gnus supports a new sort command in the Summary buffer:
 @kbd{C-c C-s C-t} (@code{gnus-summary-sort-by-recipient}).  @xref{Summary
 Sorting}.


@@ -88,10 +167,103 @@ Sorting}.
 @item @acronym{S/MIME} now features @acronym{LDAP} user certificate searches.
 You need to configure the server in @code{smime-ldap-host-list}.
 
 @item @acronym{S/MIME} now features @acronym{LDAP} user certificate searches.
 You need to configure the server in @code{smime-ldap-host-list}.
 

-@item URLs inside OpenPGP: headers are retrieved and imported to your
-PGP key ring when you click on them.
+@item URLs inside Open@acronym{PGP} headers are retrieved and imported
+to your PGP key ring when you click on them.
+
+@item
+Picons can be displayed right from the textual address, see
+@code{gnus-picon-style}.  @xref{Picons}.
+
+@item @acronym{ANSI} @acronym{SGR} control sequences can be transformed
+using @kbd{W A}.
+
+@acronym{ANSI} sequences are used in some Chinese hierarchies for
+highlighting articles (@code{gnus-article-treat-ansi-sequences}).
+
+@item Gnus now MIME decodes articles even when they lack "MIME-Version" header.
+This changes the default of @code{gnus-article-loose-mime}.
+
+@item @code{gnus-decay-scores} can be a regexp matching score files.
+For example, set it to @samp{\\.ADAPT\\'} and only adaptive score files
+will be decayed.  @xref{Score Decays}.
+
+@item Strings prefixing to the @code{To} and @code{Newsgroup} headers in
+summary lines when using @code{gnus-ignored-from-addresses} can be
+customized with @code{gnus-summary-to-prefix} and
+@code{gnus-summary-newsgroup-prefix}.  @xref{To From Newsgroups}.
+
+@item You can replace @acronym{MIME} parts with external bodies.
+See @code{gnus-mime-replace-part} and @code{gnus-article-replace-part}.
+@xref{MIME Commands}, @ref{Using MIME}.
+
+@item
+The option @code{mm-fill-flowed} can be used to disable treatment of
+format=flowed messages.  Also, flowed text is disabled when sending
+inline @acronym{PGP} signed messages.  @xref{Flowed text, ,Flowed text,
+emacs-mime, The Emacs MIME Manual}.  (New in Gnus 5.10.7)
+@c This entry is also present in the node "Oort Gnus".
+
+@item Now the new command @kbd{S W}
+(@code{gnus-article-wide-reply-with-original}) for a wide reply in the
+article buffer yanks a text that is in the active region, if it is set,
+as well as the @kbd{R} (@code{gnus-article-reply-with-original}) command.
+Note that the @kbd{R} command in the article buffer no longer accepts a
+prefix argument, which was used to make it do a wide reply.
+@xref{Article Keymap}.
+
+@item The new command @kbd{C-h b}
+(@code{gnus-article-describe-bindings}) used in the article buffer now
+shows not only the article commands but also the real summary commands
+that are accessible from the article buffer.
+

 @end itemize
 
 @end itemize
 

+@item Changes in Message mode
+
+@itemize @bullet
+@item Gnus now supports the ``hashcash'' client puzzle anti-spam mechanism.
+Use @code{(setq message-generate-hashcash t)} to enable.
+@xref{Hashcash}.
+
+@item You can now drag and drop attachments to the Message buffer.
+See @code{mml-dnd-protocol-alist} and @code{mml-dnd-attach-options}.
+@xref{MIME, ,MIME, message, Message Manual}.
+
+@item The option @code{message-yank-empty-prefix} now controls how
+empty lines are prefixed in cited text.  @xref{Insertion Variables,
+,Insertion Variables, message, Message Manual}.
+
+@item Gnus uses narrowing to hide headers in Message buffers.
+The @code{References} header is hidden by default.  To make all
+headers visible, use @code{(setq message-hidden-headers nil)}.
+@xref{Message Headers, ,Message Headers, message, Message Manual}.
+
+@item You can highlight different levels of citations like in the
+article buffer.  See @code{gnus-message-highlight-citation}.
+
+@item @code{auto-fill-mode} is enabled by default in Message mode.
+See @code{message-fill-column}.  @xref{Various Message Variables, ,
+Message Headers, message, Message Manual}.
+
+@item You can now store signature files in a special directory
+named @code{message-signature-directory}.
+
+@item The option @code{message-citation-line-format} controls the format
+of the "Whomever writes:" line.  You need to set
+@code{message-citation-line-function} to
+@code{message-insert-formatted-citation-line} as well.
+@end itemize
+
+@item Changes in Browse Server mode
+
+@itemize @bullet
+@item Gnus' sophisticated subscription methods are now available in
+Browse Server buffers as well using the variable
+@code{gnus-browse-subscribe-newsgroup-method}.
+
+@end itemize
+
+

 @item Changes in back ends
 
 @itemize @bullet
 @item Changes in back ends
 
 @itemize @bullet


@@ -119,56 +291,50 @@ Non-@acronym{ASCII} group names for the @code{nnrss} groups are also
 supported.  @xref{RSS}.
 
 @item Retrieving mail with @acronym{POP3} is supported over @acronym{SSL}/@acronym{TLS} and with StartTLS.
 supported.  @xref{RSS}.
 
 @item Retrieving mail with @acronym{POP3} is supported over @acronym{SSL}/@acronym{TLS} and with StartTLS.

-@end itemize

 
 

-@item Changes in Message
+@item The nnml back end allows other compression programs beside @file{gzip}
+for compressed message files.  @xref{Mail Spool}.

 
 

-@itemize @bullet
-@item You can now drag and drop attachments to the Message buffer.
-See @code{mml-dnd-protocol-alist} and @code{mml-dnd-attach-options}.
-@xref{MIME, ,MIME, message, Message Manual}.
+@item The nnml back end supports group compaction.

 
 

-@item The option @code{message-yank-empty-prefix} now controls how
-empty lines are prefixed in cited text.  @xref{Insertion Variables,
-,Insertion Variables, message, Message Manual}.
+This feature, accessible via the functions
+@code{gnus-group-compact-group} (@kbd{G z} in the group buffer) and
+@code{gnus-server-compact-server} (@kbd{z} in the server buffer)
+renumbers all articles in a group, starting from 1 and removing gaps.
+As a consequence, you get a correct total article count (until
+messages are deleted again).

 
 

-@item Gnus uses narrowing to hide headers in Message buffers.
-The @code{References} header is hidden by default.  To make all
-headers visible, use @code{(setq message-hidden-headers nil)}.
+@c @item nnmairix.el
+@c FIXME
+
+@c @item nnir.el
+@c FIXME

 
 

-@item The nnml back end allows other compression programs beside @file{gzip}
-for compressed message files.  @xref{Mail Spool}.

 @end itemize
 
 @end itemize
 

-@item Other changes in No Gnus
+@item Appearance
+@c Maybe it's not worth to separate this from "Miscellaneous"?

 
 @itemize @bullet
 
 @itemize @bullet

-@item
-Picons can be displayed right from the textual address, see
-@code{gnus-picon-style}.  @xref{Picons}.
-
-@item @acronym{ANSI} @acronym{SGR} control sequences can be transformed
-using @kbd{W A}.

 
 

-@acronym{ANSI} sequences are used in some Chinese hierarchies for
-highlighting articles (@code{gnus-article-treat-ansi-sequences}).
+@item The tool bar has been updated to use GNOME icons.
+You can also customize the tool bars: @kbd{M-x customize-apropos RET
+-tool-bar$} should get you started.  (Only for Emacs, not in XEmacs.)
+@c FIXME: Document this in the manual

 
 

-@item Gnus now MIME decodes articles even when they lack "MIME-Version" header.
-This changes the default of @code{gnus-article-loose-mime}.
+@item The tool bar icons are now (de)activated correctly
+in the group buffer, see the variable @code{gnus-group-update-tool-bar}.
+Its default value depends on your Emacs version.
+@c FIXME: Document this in the manual

 
 

-@item @code{gnus-decay-scores} can be a regexp matching score files.
-For example, set it to @samp{\\.ADAPT\\'} and only adaptive score files
-will be decayed.  @xref{Score Decays}.
+@item You can change the location of XEmacs' toolbars in Gnus buffers.
+See @code{gnus-use-toolbar} and @code{message-use-toolbar}.

 
 

-@item Strings prefixing to the @code{To} and @code{Newsgroup} headers in
-summary lines when using @code{gnus-ignored-from-addresses} can be
-customized with @code{gnus-summary-to-prefix} and
-@code{gnus-summary-newsgroup-prefix}.  @xref{To From Newsgroups}.
+@end itemize

 
 

-@item You can replace @acronym{MIME} parts with external bodies.
-See @code{gnus-mime-replace-part} and @code{gnus-article-replace-part}.
-@xref{MIME Commands}, @ref{Using MIME}.
+@item Miscellaneous changes

 
 

+@itemize @bullet

 @item Having edited the select-method for the foreign server in the
 server buffer is immediately reflected to the subscription of the groups
 which use the server in question.  For instance, if you change
 @item Having edited the select-method for the foreign server in the
 server buffer is immediately reflected to the subscription of the groups
 which use the server in question.  For instance, if you change


@@ -176,25 +342,24 @@ which use the server in question.  For instance, if you change
 @samp{foo.example.com}, Gnus will connect to the news host by way of the
 intermediate host @samp{bar.example.com} from next time.
 
 @samp{foo.example.com}, Gnus will connect to the news host by way of the
 intermediate host @samp{bar.example.com} from next time.
 

-@item You can change the location of XEmacs' toolbars in Gnus buffers.
-See @code{gnus-use-toolbar} and @code{message-use-toolbar}.
+@item The @file{all.SCORE} file can be edited from the group buffer
+using @kbd{W e}.

 
 

-@c FIXME: Document this in the manual
-@item The tool bar icons are now (de)activated correctly
-in the group buffer, see the variable @code{gnus-group-update-tool-bar}.
-Its default value depends on your Emacs version.
-@c FIXME: Document this in the manual
+@item You can set @code{gnus-mark-copied-or-moved-articles-as-expirable}
+to a non-@code{nil} value so that articles that have been read may be
+marked as expirable automatically when copying or moving them to a group
+that has auto-expire turned on.  The default is @code{nil} and copying
+and moving of articles behave as before; i.e., the expirable marks will
+be unchanged except that the marks will be removed when copying or
+moving articles to a group that has not turned auto-expire on.
+@xref{Expiring Mail}.
+
+@item NoCeM support has been removed.
+
+@item Carpal mode has been removed.

 
 

-@item
-The option @code{mm-fill-flowed} can be used to disable treatment of
-format=flowed messages.  Also, flowed text is disabled when sending
-inline @acronym{PGP} signed messages.

 @end itemize
 
 @end itemize
 
 @c gnus-news.texi ends here.
 @end itemize
 
 @end itemize
 
 @c gnus-news.texi ends here.

-
-@ignore
-   arch-tag: 872c7569-4340-4d73-9d1d-7826d9f94a51
-@end ignore