-@echo off
-
-rem Written by Frank Schmitt <ich@frank-schmitt.net>
-rem based on the work by David Charlap (shamino@writeme.com)
-rem .
-rem Clear PWD so emacs doesn't get confused
-set GNUS_PWD_SAVE=%PWD%
-set PWD=
-set ERROR=:
-
-if "%1" == "" goto usage
-
-rem Emacs 20.7 no longer includes emacs.bat. Use emacs.exe if the batch file is
-rem not present -- this also fixes the problem about too many parameters on Win9x.
-if exist %1\emacs.bat goto ebat
-if exist %1\emacs.exe goto eexe
-if exist %1\xemacs.exe goto xemacs
-goto noemacs
-
-:ebat
-set EMACS=emacs.bat
-echo.
-echo ***************************************************************************
-echo * Using emacs.bat (If you've got en Emacs >= 20.3 please remove Emacs.bat,
-echo * it isn't needed anymore.
-echo ***************************************************************************
-echo.
-goto emacs
-
-:eexe
-set EMACS=emacs.exe
-echo.
-echo ***************************************************************************
-echo * Using emacs.exe
-echo ***************************************************************************
-echo.
-goto emacs
-
-:emacs
-if not "%2" == "/copy" goto emacsnocopy
-if not exist %1\..\site-lisp mkdir %1\..\site-lisp
-if not exist %1\..\site-lisp\gnus mkdir %1\..\site-lisp\gnus
-if not exist %1\..\site-lisp\subdirs.el set subdirwarning=yes
-:emacsnocopy
-set EMACS_ARGS=-batch -q -no-site-file
-set GNUS_INFO_DIR=%1\..\info
-set GNUS_LISP_DIR=%1\..\site-lisp\gnus\lisp
-set GNUS_ETC_DIR=%1\..\site-lisp\gnus\etc
-goto lisp
-
-:xemacs
-set EMACS=xemacs.exe
-if not "%2" == "/copy" goto xemacsnocopy
-if not exist %1\..\..\site-packages\ mkdir %1\..\..\site-packages\
-if not exist %1\..\..\site-packages\info mkdir %1\..\..\site-packages\info
-if not exist %1\..\..\site-packages\lisp mkdir %1\..\..\site-packages\lisp
-if not exist %1\..\..\site-packages\etc mkdir %1\..\..\site-packages\etc
-:xemacsnocopy
-set EMACS_ARGS=-batch -no-autoloads
-set GNUS_INFO_DIR=%1\..\..\site-packages\info
-set GNUS_LISP_DIR=%1\..\..\site-packages\lisp\gnus
-set GNUS_ETC_DIR=%1\..\..\site-packages\etc
-echo.
-echo ***************************************************************************
-echo * Using xemacs.exe
-echo ***************************************************************************
-echo.
-goto lisp
-
-:lisp
-set EMACSBATCH=call %1\%EMACS% %EMACS_ARGS%
-cd lisp
-if exist gnus-load.el del gnus-load.el
-echo.
-echo Stand by while generating autoloads.
-echo.
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-cus-load .
-if ErrorLevel 1 set ERROR=make-cus-load
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-auto-load .
-if ErrorLevel 1 set ERROR=%ERROR%,make-auto-load
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-load
-if ErrorLevel 1 set ERROR=%ERROR%,make-load
-echo.
-echo Stand by while compiling lisp files.
-echo.
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-compile
-if ErrorLevel 1 set ERROR=%ERROR%,compile
-
-if not "%2" == "/copy" goto infotest
-echo.
-echo Stand by while copying lisp files.
-echo.
-if not exist %GNUS_LISP_DIR% mkdir %GNUS_LISP_DIR%
-xcopy /R /Q /Y *.el* %GNUS_LISP_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-lisp
-goto infotest
-
-:infotest
-cd ..\texi
-if exist sieve del sieve
-makeinfo sieve.texi
-if exist sieve goto minfo
-REM It seems that makeinfo isn't available
-set EMACSINFO=%EMACSBATCH% -l infohack.el -f batch-makeinfo
-echo.
-echo ***************************************************************************
-echo * Using infohack.el, if you've got makeinfo.exe put it in PATH.
-echo ***************************************************************************
-echo.
-goto info
-
-:minfo
-set EMACSINFO=makeinfo
-echo.
-echo ***************************************************************************
-echo * Using makeinfo
-echo ***************************************************************************
-echo.
-goto info
-
-:info
-echo.
-echo Stand by while generating info files.
-echo.
-%EMACSINFO% emacs-mime.texi
-if ErrorLevel 1 set ERROR=%ERROR%,emacs-mime.texi
-%EMACSINFO% gnus.texi
-if ErrorLevel 1 set ERROR=%ERROR%,gnus.texi
-%EMACSINFO% sieve.texi
-if ErrorLevel 1 set ERROR=%ERROR%,sieve.texi
-%EMACSINFO% pgg.texi
-if ErrorLevel 1 set ERROR=%ERROR%,pgg.texi
-%EMACSINFO% message.texi
-if ErrorLevel 1 set ERROR=%ERROR%,message.texi
-
-if not "%2" == "/copy" goto nocopy
-if not exist %GNUS_INFO_DIR% mkdir %GNUS_INFO_DIR%
-
-echo.
-echo Stand by while copying info files.
-echo.
-xcopy /R /Q /Y gnus %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-info
-xcopy /R /Q /Y gnus-? %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-x-info
-xcopy /R /Q /Y gnus-?? %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-xx-info
-xcopy /R /Q /Y message %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-message-info
-if exist message-1 xcopy /R /Q /Y message-? %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-message-x-info
-xcopy /R /Q /Y emacs-mime %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-emacs-mime-info
-xcopy /R /Q /Y sieve %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-sieve-info
-xcopy /R /Q /Y pgg %GNUS_INFO_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-pgg-info
-
-echo.
-echo ***************************************************************************
-echo * You should add the following lines to
-echo * %GNUS_INFO_DIR%\dir
-echo * if they aren't already there:
-echo *
-echo * * PGG: (pgg). Emacs interface to various PGP implementations.
-echo * * Sieve: (sieve). Managing Sieve scripts in Emacs.
-echo ***************************************************************************
-echo.
-
-:etc
-cd ..\etc
-echo.
-echo Stand by while copying etc files.
-echo.
-if not exist %GNUS_ETC_DIR% mkdir %GNUS_ETC_DIR%
-xcopy /R /Q /Y gnus-tut.txt %GNUS_ETC_DIR%
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-tut-txt
-if not exist %GNUS_ETC_DIR%\gnus mkdir %GNUS_ETC_DIR%\gnus
-xcopy /R /Q /Y .\gnus\* %GNUS_ETC_DIR%\gnus\
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-*
-if not exist %GNUS_ETC_DIR%\smilies mkdir %GNUS_ETC_DIR%\smilies
-xcopy /R /Q /Y .\smilies\* %GNUS_ETC_DIR%\smilies\
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-smilies-*
-goto warnings
-
-:nocopy
-echo.
-echo ***************************************************************************
-echo * You chose not to copy the files, therefore you should add the
-echo * following lines to the TOP of your [X]emacs customization file:
-echo *
-echo * (add-to-list 'load-path "/Path/to/gnus/lisp")
-echo * (if (featurep 'xemacs)
-echo * (add-to-list 'Info-directory-list "c:/Path/to/gnus/texi/")
-echo * (add-to-list 'Info-default-directory-list "c:/Path/to/gnus/texi/")
-echo * (require 'gnus-load)
-echo *
-echo * Replace c:/Path/to/gnus with the Path where your new Gnus is (that's here
-echo * and yes, you've got to use forward slashes).
-echo ***************************************************************************
-echo.
-
-:warnings
-if not "%subdirwarning%" == "yes" goto warngnusload
-echo.
-echo ***************************************************************************
-echo * There's no subdirs.el file in your site-lisp directory, you should
-echo * therefor add the following line to the TOP of your Emacs
-echo * customization file:
-echo *
-echo * (add-to-list 'load-path "/Path/to/emacs-site-lisp-directory/gnus/lisp")
-echo * (require 'gnus-load)
-echo * Yes, it must be forward slashes.
-echo ***************************************************************************
-echo.
-goto warnerrors
-
-:warngnusload
-echo.
-echo ***************************************************************************
-echo * You should add the following line to the TOP of your Emacs
-echo * customization file:
-echo *
-echo * (require 'gnus-load)
-echo ***************************************************************************
-echo.
-
-:warnerrors
-if "%ERROR%"==":" goto noerrors
-set errorlevel=1
-echo.
-echo ***************************************************************************
-echo * WARNING ERRORS OCCURRED!
-echo * You should look for error messages in the output of the called programs
-echo * and try to find out what exactly went wrong.
-echo * Errors occured in the following modules:
-echo * %ERROR%
-echo ***************************************************************************
-echo.
-goto done
-
-:noerrors
-set errorlevel=0
-
-:done
-cd ..
-goto end
-
-:noemacs
-echo.
-echo ***************************************************************************
-echo * Unable to find emacs.exe or xemacs.exe on the path you specified!
-echo * STOP!
-echo ***************************************************************************
-echo.
-goto usage
-
-:usage
-echo.
-echo ***************************************************************************
-echo * Usage: make.bat :[X]Emacs-exe-dir: [/copy]
-echo *
-echo * where: :[X]Emacs-exe-dir: is the directory your
-echo * emacs.exe respectively xemacs.exe resides in,
-echo * e.g. G:\Programme\XEmacs\XEmacs-21.4.11\i586-pc-win32\
-echo * or G:\Emacs\bin
-echo * /copy indicates that the compiled files should be copied to your
-echo * emacs lisp, info, and etc site directories.
-echo *
-echo * Note: If you have Emacs/w3 you should set the environment variable
-echo * W3DIR to the directory where w3 is installed eg.
-echo * set W3DIR=d:\lisp\w3-4.0pre46\lisp
-echo ***************************************************************************
-echo.
-
-:end
-rem Restore environment variables
-set PWD=%GNUS_PWD_SAVE%
-set GNUS_PWD_SAVE=
-set EMACSBATCH=
-set GNUS_LISP_DIR=
-set GNUS_INFO_DIR=
-set GNUS_ETC_DIR=
-set subdirwarning=
-set ERROR=
+@echo OFF\r
+REM Change this to ON when debugging this batch file.\r
+\r
+rem Written by Frank Schmitt (ich@frank-schmitt.net)\r
+rem based on the work by David Charlap (shamino@writeme.com)\r
+rem .\r
+rem .\r
+rem Clear PWD so emacs doesn't get confused\r
+set GNUS_PWD_SAVE=%PWD%\r
+set PWD=\r
+set ERROR=:\r
+REM set pause=\r
+\r
+if %1p == p goto usage\r
+\r
+echo * Installing Gnus on your system. Operating system:\r
+ver\r
+rem Emacs 20.7 no longer includes emacs.bat. Use emacs.exe if the batch file is\r
+rem not present -- this also fixes the problem about too many parameters on Win9x.\r
+if exist %1\emacs.bat goto ebat\r
+if exist %1\emacs.exe goto eexe\r
+if exist %1\xemacs.exe goto xemacs\r
+goto noemacs\r
+\r
+:ebat\r
+set EMACS=emacs.bat\r
+echo.\r
+echo ***************************************************************************\r
+echo * Using emacs.bat (If you've got Emacs 20.3 or higher please remove\r
+echo * Emacs.bat, it isn't needed anymore.)\r
+echo ***************************************************************************\r
+echo.\r
+goto emacs\r
+\r
+:eexe\r
+set EMACS=emacs.exe\r
+echo.\r
+echo ***************************************************************************\r
+echo * Using emacs.exe\r
+echo ***************************************************************************\r
+echo.\r
+goto emacs\r
+\r
+:emacs\r
+if not "%2" == "/copy" goto emacsnocopy\r
+if not exist %1\..\site-lisp\nul mkdir %1\..\site-lisp\r
+if not exist %1\..\site-lisp\gnus\nul mkdir %1\..\site-lisp\gnus\r
+if not exist %1\..\site-lisp\subdirs.el set subdirwarning=yes\r
+:emacsnocopy\r
+set EMACS_ARGS=-batch -q -no-site-file\r
+set GNUS_INFO_DIR=%1\..\info\r
+set GNUS_LISP_DIR=%1\..\site-lisp\gnus\lisp\r
+set GNUS_ETC_DIR=%1\..\site-lisp\gnus\etc\r
+goto lisp\r
+\r
+:xemacs\r
+set EMACS=xemacs.exe\r
+if not "%2" == "/copy" goto xemacsnocopy\r
+if not exist %1\..\..\site-packages\nul mkdir %1\..\..\site-packages\\r
+if not exist %1\..\..\site-packages\info\nul mkdir %1\..\..\site-packages\info\r
+if not exist %1\..\..\site-packages\lisp\nul mkdir %1\..\..\site-packages\lisp\r
+if not exist %1\..\..\site-packages\etc\nul mkdir %1\..\..\site-packages\etc\r
+:xemacsnocopy\r
+set EMACS_ARGS=-batch -no-autoloads\r
+set GNUS_INFO_DIR=%1\..\..\site-packages\info\r
+set GNUS_LISP_DIR=%1\..\..\site-packages\lisp\gnus\r
+set GNUS_ETC_DIR=%1\..\..\site-packages\etc\r
+echo.\r
+echo ***************************************************************************\r
+echo * Using xemacs.exe\r
+echo ***************************************************************************\r
+echo.\r
+goto lisp\r
+\r
+:lisp\r
+if "%pause%" == "pause" pause\r
+set EMACSBATCH=call %1\%EMACS% %EMACS_ARGS%\r
+cd lisp\r
+if exist gnus-load.el attrib -r gnus-load.el\r
+if exist gnus-load.el del gnus-load.el\r
+echo.\r
+echo * Stand by while generating autoloads.\r
+echo.\r
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-cus-load .\r
+if ErrorLevel 1 set ERROR=make-cus-load\r
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-auto-load .\r
+if ErrorLevel 1 set ERROR=%ERROR%,make-auto-load\r
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-load\r
+if ErrorLevel 1 set ERROR=%ERROR%,make-load\r
+echo.\r
+echo * Stand by while compiling lisp files.\r
+echo.\r
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-compile\r
+if ErrorLevel 1 set ERROR=%ERROR%,compile\r
+\r
+if not "%2" == "/copy" goto infotest\r
+echo.\r
+echo * Stand by while copying lisp files.\r
+echo.\r
+if not exist %GNUS_LISP_DIR%\nul mkdir %GNUS_LISP_DIR%\r
+xcopy /R /Q /Y *.el* %GNUS_LISP_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-lisp\r
+goto infotest\r
+\r
+:infotest\r
+cd ..\texi\r
+if exist sieve attrib -r sieve\r
+if exist sieve del sieve\r
+\r
+echo * Checking if makeinfo is available...\r
+makeinfo sieve.texi\r
+if exist sieve goto minfo\r
+echo * No makeinfo found, using infohack.el.\r
+set EMACSINFO=%EMACSBATCH% -l infohack.el -f batch-makeinfo\r
+echo.\r
+echo ***************************************************************************\r
+echo * Using infohack.el, if you've got makeinfo.exe put it in PATH.\r
+echo ***************************************************************************\r
+echo.\r
+goto info\r
+\r
+:minfo\r
+set EMACSINFO=makeinfo\r
+echo.\r
+echo ***************************************************************************\r
+echo * Using makeinfo\r
+echo ***************************************************************************\r
+echo.\r
+goto info\r
+\r
+:info\r
+if "%pause%" == "pause" pause\r
+echo.\r
+echo * Stand by while generating info files.\r
+echo.\r
+%EMACSINFO% emacs-mime.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,emacs-mime.texi\r
+%EMACSINFO% gnus.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,gnus.texi\r
+%EMACSINFO% sieve.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,sieve.texi\r
+%EMACSINFO% pgg.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,pgg.texi\r
+%EMACSINFO% message.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,message.texi\r
+%EMACSINFO% sasl.texi\r
+if ErrorLevel 1 set ERROR=%ERROR%,sasl.texi\r
+\r
+if not "%2" == "/copy" goto nocopy\r
+if not exist %GNUS_INFO_DIR%\nul mkdir %GNUS_INFO_DIR%\r
+\r
+echo.\r
+echo * Stand by while copying info files.\r
+echo.\r
+xcopy /R /Q /Y gnus %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-info\r
+xcopy /R /Q /Y gnus-? %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-x-info\r
+xcopy /R /Q /Y gnus-?? %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-xx-info\r
+xcopy /R /Q /Y message %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-message-info\r
+if exist message-1 xcopy /R /Q /Y message-? %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-message-x-info\r
+xcopy /R /Q /Y emacs-mime %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-emacs-mime-info\r
+xcopy /R /Q /Y sieve %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-sieve-info\r
+xcopy /R /Q /Y pgg %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-pgg-info\r
+xcopy /R /Q /Y sasl %GNUS_INFO_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-sasl-info\r
+\r
+echo.\r
+echo ***************************************************************************\r
+echo * You should add the following lines to\r
+echo * %GNUS_INFO_DIR%\dir\r
+echo * if they aren't already there:\r
+echo *\r
+echo * * PGG: (pgg). Emacs interface to various PGP implementations.\r
+echo * * Sieve: (sieve). Managing Sieve scripts in Emacs.\r
+echo * * SASL: (sasl). The Emacs SASL library.\r
+echo ***************************************************************************\r
+echo.\r
+\r
+:etc\r
+if "%pause%" == "pause" pause\r
+cd ..\etc\r
+echo.\r
+echo * Stand by while copying etc files.\r
+echo.\r
+REM\r
+if not exist %GNUS_ETC_DIR% mkdir %GNUS_ETC_DIR%\r
+echo ** gnus-tut.txt ...\r
+xcopy /R /Q /Y gnus-tut.txt %GNUS_ETC_DIR%\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-tut-txt\r
+REM\r
+REM FIXME: Instead of C&P, we should use a FOR loop.\r
+REM\r
+set i=images\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=images\mail\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=images\gnus\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=images\smilies\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=images\smilies\grayscale\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=images\smilies\medium\r
+if not exist %GNUS_ETC_DIR%\%i%\nul mkdir %GNUS_ETC_DIR%\%i%\r
+echo ** .\%i%\ ...\r
+xcopy /R /Q /Y .\%i%\*.* %GNUS_ETC_DIR%\%i%\\r
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-%i%\r
+REM\r
+set i=\r
+goto warnings\r
+\r
+:nocopy\r
+echo.\r
+echo ***************************************************************************\r
+echo * You chose not to copy the files, therefore you should add the\r
+echo * following lines to the TOP of your [X]emacs customization file:\r
+echo *\r
+echo * (add-to-list 'load-path "/Path/to/gnus/lisp")\r
+echo * (if (featurep 'xemacs)\r
+echo * (add-to-list 'Info-directory-list "c:/Path/to/gnus/texi/")\r
+echo * (add-to-list 'Info-default-directory-list "c:/Path/to/gnus/texi/"))\r
+echo * (require 'gnus-load)\r
+echo *\r
+echo * Replace c:/Path/to/gnus with the Path where your new Gnus is (that's here\r
+echo * and yes, you've got to use forward slashes).\r
+echo ***************************************************************************\r
+echo.\r
+\r
+:warnings\r
+if not "%subdirwarning%" == "yes" goto warngnusload\r
+echo.\r
+echo ***************************************************************************\r
+echo * There's no subdirs.el file in your site-lisp directory, you should\r
+echo * therefor add the following line to the TOP of your Emacs\r
+echo * customization file:\r
+echo *\r
+echo * (add-to-list 'load-path "/Path/to/emacs-site-lisp-directory/gnus/lisp")\r
+echo * (require 'gnus-load)\r
+echo * Yes, it must be forward slashes.\r
+echo ***************************************************************************\r
+echo.\r
+goto warnerrors\r
+\r
+:warngnusload\r
+echo.\r
+echo ***************************************************************************\r
+echo * You should add the following line to the TOP of your Emacs\r
+echo * customization file:\r
+echo *\r
+echo * (require 'gnus-load)\r
+echo ***************************************************************************\r
+echo.\r
+\r
+:warnerrors\r
+if "%ERROR%"==":" goto noerrors\r
+set errorlevel=1\r
+echo.\r
+echo ***************************************************************************\r
+echo * WARNING ERRORS OCCURRED!\r
+echo * You should look for error messages in the output of the called programs\r
+echo * and try to find out what exactly went wrong.\r
+echo * Errors occured in the following modules:\r
+echo * %ERROR%\r
+echo ***************************************************************************\r
+echo.\r
+goto done\r
+\r
+:noerrors\r
+set errorlevel=0\r
+\r
+:done\r
+cd ..\r
+goto end\r
+\r
+:noemacs\r
+echo.\r
+echo ***************************************************************************\r
+echo * Unable to find emacs.exe or xemacs.exe on the path you specified!\r
+echo * STOP!\r
+echo ***************************************************************************\r
+echo.\r
+goto usage\r
+\r
+:usage\r
+echo.\r
+echo ***************************************************************************\r
+REM echo * Usage: make.bat :[X]Emacs-exe-dir: [/copy] [ ^> inst-log.txt 2^>^&1 ]\r
+echo * Usage: make.bat :[X]Emacs-exe-dir: [/copy]\r
+echo *\r
+echo * where: :[X]Emacs-exe-dir: is the directory your\r
+echo * emacs.exe respectively xemacs.exe resides in,\r
+echo * e.g. G:\Programme\XEmacs\XEmacs-21.4.11\i586-pc-win32\\r
+echo * or G:\Emacs\bin\r
+echo * /copy indicates that the compiled files should be copied to your\r
+echo * emacs lisp, info, and etc site directories.\r
+REM echo * ^> inst-log.txt 2^>^&1\r
+REM echo * Log output to inst-log.txt\r
+echo ***************************************************************************\r
+echo.\r
+\r
+:end\r
+rem Restore environment variables\r
+set PWD=%GNUS_PWD_SAVE%\r
+set GNUS_PWD_SAVE=\r
+set EMACSBATCH=\r
+set GNUS_LISP_DIR=\r
+set GNUS_INFO_DIR=\r
+set GNUS_ETC_DIR=\r
+set subdirwarning=\r
+set ERROR=\r
projects / gnus / blobdiff