-@echo off\r
-\r
-rem Written by Frank Schmitt <ich@frank-schmitt.net>\r
-rem based on the work by David Charlap (shamino@writeme.com)\r
-rem .\r
-rem Clear PWD so emacs doesn't get confused\r
-set GNUS_PWD_SAVE=%PWD%\r
-set PWD=\r
-set ERROR=:\r
-\r
-if "%1" == "" goto usage\r
-\r
-rem Emacs 20.7 no longer includes emacs.bat. Use emacs.exe if the batch file is\r
-rem not present -- this also fixes the problem about too many parameters on Win9x.\r
-if exist %1\emacs.bat goto ebat\r
-if exist %1\emacs.exe goto eexe\r
-if exist %1\xemacs.exe goto xemacs\r
-goto noemacs\r
-\r
-:ebat\r
-set EMACS=emacs.bat\r
-echo.\r
-echo ***************************************************************************\r
-echo * Using emacs.bat (If you've got en Emacs >= 20.3 please remove Emacs.bat, \r
-echo * it isn't needed anymore.\r
-echo ***************************************************************************\r
-echo.\r
-goto emacs\r
-\r
-:eexe\r
-set EMACS=emacs.exe\r
-echo.\r
-echo ***************************************************************************\r
-echo * Using emacs.exe\r
-echo ***************************************************************************\r
-echo.\r
-goto emacs\r
-\r
-:emacs\r
-if not "%2" == "/copy" goto emacsnocopy\r
-if not exist %1\..\site-lisp mkdir %1\..\site-lisp\r
-if not exist %1\..\site-lisp\gnus mkdir %1\..\site-lisp\gnus\r
-if not exist %1\..\site-lisp\subdirs.el set subdirwarning=yes\r
-:emacsnocopy\r
-set EMACS_ARGS=-batch -q -no-site-file\r
-set GNUS_INFO_DIR=%1\..\info\r
-set GNUS_LISP_DIR=%1\..\site-lisp\gnus\lisp\r
-set GNUS_ETC_DIR=%1\..\site-lisp\gnus\etc\r
-goto lisp\r
- \r
-:xemacs \r
-set EMACS=xemacs.exe\r
-if not "%2" == "/copy" goto xemacsnocopy\r
-if not exist %1\..\..\site-packages\ mkdir %1\..\..\site-packages\\r
-if not exist %1\..\..\site-packages\info mkdir %1\..\..\site-packages\info\r
-if not exist %1\..\..\site-packages\lisp mkdir %1\..\..\site-packages\lisp\r
-if not exist %1\..\..\site-packages\etc mkdir %1\..\..\site-packages\etc\r
-:xemacsnocopy\r
-set EMACS_ARGS=-batch -no-autoloads\r
-set GNUS_INFO_DIR=%1\..\..\site-packages\info\r
-set GNUS_LISP_DIR=%1\..\..\site-packages\lisp\gnus\r
-set GNUS_ETC_DIR=%1\..\..\site-packages\etc\r
-echo.\r
-echo ***************************************************************************\r
-echo * Using xemacs.exe\r
-echo ***************************************************************************\r
-echo.\r
-goto lisp\r
-\r
-:lisp\r
-set EMACSBATCH=call %1\%EMACS% %EMACS_ARGS%\r
-cd lisp\r
-if exist gnus-load.el del gnus-load.el\r
-echo.\r
-echo Stand by while generating autoloads.\r
-echo.\r
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-cus-load .\r
-if ErrorLevel 1 set ERROR=make-cus-load\r
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-auto-load .\r
-if ErrorLevel 1 set ERROR=%ERROR%,make-auto-load\r
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-load\r
-if ErrorLevel 1 set ERROR=%ERROR%,make-load\r
-echo.\r
-echo Stand by while compiling lisp files.\r
-echo.\r
-%EMACSBATCH% -l ./dgnushack.el -f dgnushack-compile\r
-if ErrorLevel 1 set ERROR=%ERROR%,compile\r
-\r
-if not "%2" == "/copy" goto infotest\r
-echo.\r
-echo Stand by while copying lisp files.\r
-echo.\r
-if not exist %GNUS_LISP_DIR% mkdir %GNUS_LISP_DIR%\r
-xcopy /R /Q /Y *.el* %GNUS_LISP_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-lisp\r
-goto infotest\r
-\r
-:infotest\r
-cd ..\texi\r
-if exist sieve del sieve\r
-makeinfo sieve.texi\r
-if exist sieve goto minfo \r
-REM It seems that makeinfo isn't available\r
-set EMACSINFO=%EMACSBATCH% -l infohack.el -f batch-makeinfo\r
-echo.\r
-echo ***************************************************************************\r
-echo * Using infohack.el, if you've got makeinfo.exe put it in PATH.\r
-echo ***************************************************************************\r
-echo.\r
-goto info\r
-\r
-:minfo\r
-set EMACSINFO=makeinfo \r
-echo.\r
-echo ***************************************************************************\r
-echo * Using makeinfo\r
-echo ***************************************************************************\r
-echo.\r
-goto info\r
-\r
-:info\r
-echo.\r
-echo Stand by while generating info files.\r
-echo.\r
-%EMACSINFO% emacs-mime.texi\r
-if ErrorLevel 1 set ERROR=%ERROR%,emacs-mime.texi\r
-%EMACSINFO% gnus.texi\r
-if ErrorLevel 1 set ERROR=%ERROR%,gnus.texi\r
-%EMACSINFO% sieve.texi\r
-if ErrorLevel 1 set ERROR=%ERROR%,sieve.texi\r
-%EMACSINFO% pgg.texi\r
-if ErrorLevel 1 set ERROR=%ERROR%,pgg.texi\r
-%EMACSINFO% message.texi\r
-if ErrorLevel 1 set ERROR=%ERROR%,message.texi\r
-\r
-if not "%2" == "/copy" goto nocopy\r
-if not exist %GNUS_INFO_DIR% mkdir %GNUS_INFO_DIR%\r
-\r
-echo.\r
-echo Stand by while copying info files.\r
-echo.\r
-xcopy /R /Q /Y gnus %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-info\r
-xcopy /R /Q /Y gnus-? %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-x-info\r
-xcopy /R /Q /Y gnus-?? %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-xx-info\r
-xcopy /R /Q /Y message %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-message-info\r
-if exist message-1 xcopy /R /Q /Y message-? %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-message-x-info\r
-xcopy /R /Q /Y emacs-mime %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-emacs-mime-info\r
-xcopy /R /Q /Y sieve %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-sieve-info\r
-xcopy /R /Q /Y pgg %GNUS_INFO_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-pgg-info\r
-\r
-echo.\r
-echo ***************************************************************************\r
-echo * You should add the following lines to \r
-echo * %GNUS_INFO_DIR%\dir \r
-echo * if they aren't already there:\r
-echo *\r
-echo * * PGG: (pgg). Emacs interface to various PGP implementations.\r
-echo * * Sieve: (sieve). Managing Sieve scripts in Emacs.\r
-echo ***************************************************************************\r
-echo.\r
-\r
-:etc\r
-cd ..\etc\r
-echo.\r
-echo Stand by while copying etc files.\r
-echo.\r
-if not exist %GNUS_ETC_DIR% mkdir %GNUS_ETC_DIR%\r
-xcopy /R /Q /Y gnus-tut.txt %GNUS_ETC_DIR%\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-tut-txt\r
-if not exist %GNUS_ETC_DIR%\gnus mkdir %GNUS_ETC_DIR%\gnus\r
-xcopy /R /Q /Y .\gnus\* %GNUS_ETC_DIR%\gnus\\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-*\r
-if not exist %GNUS_ETC_DIR%\smilies mkdir %GNUS_ETC_DIR%\smilies\r
-xcopy /R /Q /Y .\smilies\* %GNUS_ETC_DIR%\smilies\\r
-if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-smilies-*\r
-goto warnings\r
-\r
-:nocopy\r
-echo.\r
-echo ***************************************************************************\r
-echo * You chose not to copy the files, therefore you should add the \r
-echo * following lines to the TOP of your [X]emacs customization file:\r
-echo *\r
-echo * (add-to-list 'load-path "/Path/to/gnus/lisp")\r
-echo * (if (featurep 'xemacs)\r
-echo * (add-to-list 'Info-directory-list "c:/Path/to/gnus/texi/")\r
-echo * (add-to-list 'Info-default-directory-list "c:/Path/to/gnus/texi/")\r
-echo * (require 'gnus-load)\r
-echo *\r
-echo * Replace c:/Path/to/gnus with the Path where your new Gnus is (that's here\r
-echo * and yes, you've got to use forward slashes).\r
-echo ***************************************************************************\r
-echo.\r
-\r
-:warnings\r
-if not "%subdirwarning%" == "yes" goto warngnusload\r
-echo.\r
-echo ***************************************************************************\r
-echo * There's no subdirs.el file in your site-lisp directory, you should\r
-echo * therefor add the following line to the TOP of your Emacs\r
-echo * customization file:\r
-echo *\r
-echo * (add-to-list 'load-path "/Path/to/emacs-site-lisp-directory/gnus/lisp")\r
-echo * (require 'gnus-load)\r
-echo * Yes, it must be forward slashes.\r
-echo ***************************************************************************\r
-echo.\r
-goto warnerrors\r
-\r
-:warngnusload\r
-echo.\r
-echo ***************************************************************************\r
-echo * You should add the following line to the TOP of your Emacs\r
-echo * customization file:\r
-echo *\r
-echo * (require 'gnus-load)\r
-echo ***************************************************************************\r
-echo.\r
-\r
-:warnerrors\r
-if "%ERROR%"==":" goto noerrors\r
-set errorlevel=1\r
-echo.\r
-echo ***************************************************************************\r
-echo * WARNING ERRORS OCCURRED!\r
-echo * You should look for error messages in the output of the called programs\r
-echo * and try to find out what exactly went wrong.\r
-echo * Errors occured in the following modules:\r
-echo * %ERROR%\r
-echo ***************************************************************************\r
-echo.\r
-goto done\r
-\r
-:noerrors\r
-set errorlevel=0\r
-\r
-:done\r
-cd ..\r
-goto end\r
-\r
-:noemacs\r
-echo.\r
-echo ***************************************************************************\r
-echo * Unable to find emacs.exe or xemacs.exe on the path you specified!\r
-echo * STOP!\r
-echo ***************************************************************************\r
-echo.\r
-goto usage\r
-\r
-:usage\r
-echo.\r
-echo ***************************************************************************\r
-echo * Usage: make.bat :[X]Emacs-exe-dir: [/copy]\r
-echo *\r
-echo * where: :[X]Emacs-exe-dir: is the directory your \r
-echo * emacs.exe respectively xemacs.exe resides in, \r
-echo * e.g. G:\Programme\XEmacs\XEmacs-21.4.11\i586-pc-win32\\r
-echo * or G:\Emacs\bin\r
-echo * /copy indicates that the compiled files should be copied to your\r
-echo * emacs lisp, info, and etc site directories.\r
-echo *\r
-echo * Note: If you have Emacs/w3 you should set the environment variable \r
-echo * W3DIR to the directory where w3 is installed eg.\r
-echo * set W3DIR=d:\lisp\w3-4.0pre46\lisp\r
-echo ***************************************************************************\r
-echo.\r
-\r
-:end\r
-rem Restore environment variables\r
-set PWD=%GNUS_PWD_SAVE%\r
-set GNUS_PWD_SAVE=\r
-set EMACSBATCH=\r
-set GNUS_LISP_DIR=\r
-set GNUS_INFO_DIR=\r
-set GNUS_ETC_DIR=\r
-set subdirwarning=\r
-set ERROR=\r
+@echo off
+
+rem Written by Frank Schmitt <ich@frank-schmitt.net>
+rem based on the work by David Charlap (shamino@writeme.com)
+rem .
+rem Clear PWD so emacs doesn't get confused
+set GNUS_PWD_SAVE=%PWD%
+set PWD=
+set ERROR=:
+
+if "%1" == "" goto usage
+
+rem Emacs 20.7 no longer includes emacs.bat. Use emacs.exe if the batch file is
+rem not present -- this also fixes the problem about too many parameters on Win9x.
+if exist %1\emacs.bat goto ebat
+if exist %1\emacs.exe goto eexe
+if exist %1\xemacs.exe goto xemacs
+goto noemacs
+
+:ebat
+set EMACS=emacs.bat
+echo.
+echo ***************************************************************************
+echo * Using emacs.bat (If you've got en Emacs >= 20.3 please remove Emacs.bat,
+echo * it isn't needed anymore.
+echo ***************************************************************************
+echo.
+goto emacs
+
+:eexe
+set EMACS=emacs.exe
+echo.
+echo ***************************************************************************
+echo * Using emacs.exe
+echo ***************************************************************************
+echo.
+goto emacs
+
+:emacs
+if not "%2" == "/copy" goto emacsnocopy
+if not exist %1\..\site-lisp mkdir %1\..\site-lisp
+if not exist %1\..\site-lisp\gnus mkdir %1\..\site-lisp\gnus
+if not exist %1\..\site-lisp\subdirs.el set subdirwarning=yes
+:emacsnocopy
+set EMACS_ARGS=-batch -q -no-site-file
+set GNUS_INFO_DIR=%1\..\info
+set GNUS_LISP_DIR=%1\..\site-lisp\gnus\lisp
+set GNUS_ETC_DIR=%1\..\site-lisp\gnus\etc
+goto lisp
+
+:xemacs
+set EMACS=xemacs.exe
+if not "%2" == "/copy" goto xemacsnocopy
+if not exist %1\..\..\site-packages\ mkdir %1\..\..\site-packages\
+if not exist %1\..\..\site-packages\info mkdir %1\..\..\site-packages\info
+if not exist %1\..\..\site-packages\lisp mkdir %1\..\..\site-packages\lisp
+if not exist %1\..\..\site-packages\etc mkdir %1\..\..\site-packages\etc
+:xemacsnocopy
+set EMACS_ARGS=-batch -no-autoloads
+set GNUS_INFO_DIR=%1\..\..\site-packages\info
+set GNUS_LISP_DIR=%1\..\..\site-packages\lisp\gnus
+set GNUS_ETC_DIR=%1\..\..\site-packages\etc
+echo.
+echo ***************************************************************************
+echo * Using xemacs.exe
+echo ***************************************************************************
+echo.
+goto lisp
+
+:lisp
+set EMACSBATCH=call %1\%EMACS% %EMACS_ARGS%
+cd lisp
+if exist gnus-load.el del gnus-load.el
+echo.
+echo Stand by while generating autoloads.
+echo.
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-cus-load .
+if ErrorLevel 1 set ERROR=make-cus-load
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-auto-load .
+if ErrorLevel 1 set ERROR=%ERROR%,make-auto-load
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-make-load
+if ErrorLevel 1 set ERROR=%ERROR%,make-load
+echo.
+echo Stand by while compiling lisp files.
+echo.
+%EMACSBATCH% -l ./dgnushack.el -f dgnushack-compile
+if ErrorLevel 1 set ERROR=%ERROR%,compile
+
+if not "%2" == "/copy" goto infotest
+echo.
+echo Stand by while copying lisp files.
+echo.
+if not exist %GNUS_LISP_DIR% mkdir %GNUS_LISP_DIR%
+xcopy /R /Q /Y *.el* %GNUS_LISP_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-lisp
+goto infotest
+
+:infotest
+cd ..\texi
+if exist sieve del sieve
+makeinfo sieve.texi
+if exist sieve goto minfo
+REM It seems that makeinfo isn't available
+set EMACSINFO=%EMACSBATCH% -l infohack.el -f batch-makeinfo
+echo.
+echo ***************************************************************************
+echo * Using infohack.el, if you've got makeinfo.exe put it in PATH.
+echo ***************************************************************************
+echo.
+goto info
+
+:minfo
+set EMACSINFO=makeinfo
+echo.
+echo ***************************************************************************
+echo * Using makeinfo
+echo ***************************************************************************
+echo.
+goto info
+
+:info
+echo.
+echo Stand by while generating info files.
+echo.
+%EMACSINFO% emacs-mime.texi
+if ErrorLevel 1 set ERROR=%ERROR%,emacs-mime.texi
+%EMACSINFO% gnus.texi
+if ErrorLevel 1 set ERROR=%ERROR%,gnus.texi
+%EMACSINFO% sieve.texi
+if ErrorLevel 1 set ERROR=%ERROR%,sieve.texi
+%EMACSINFO% pgg.texi
+if ErrorLevel 1 set ERROR=%ERROR%,pgg.texi
+%EMACSINFO% message.texi
+if ErrorLevel 1 set ERROR=%ERROR%,message.texi
+
+if not "%2" == "/copy" goto nocopy
+if not exist %GNUS_INFO_DIR% mkdir %GNUS_INFO_DIR%
+
+echo.
+echo Stand by while copying info files.
+echo.
+xcopy /R /Q /Y gnus %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-info
+xcopy /R /Q /Y gnus-? %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-x-info
+xcopy /R /Q /Y gnus-?? %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-gnus-xx-info
+xcopy /R /Q /Y message %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-message-info
+if exist message-1 xcopy /R /Q /Y message-? %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-message-x-info
+xcopy /R /Q /Y emacs-mime %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-emacs-mime-info
+xcopy /R /Q /Y sieve %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-sieve-info
+xcopy /R /Q /Y pgg %GNUS_INFO_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-pgg-info
+
+echo.
+echo ***************************************************************************
+echo * You should add the following lines to
+echo * %GNUS_INFO_DIR%\dir
+echo * if they aren't already there:
+echo *
+echo * * PGG: (pgg). Emacs interface to various PGP implementations.
+echo * * Sieve: (sieve). Managing Sieve scripts in Emacs.
+echo ***************************************************************************
+echo.
+
+:etc
+cd ..\etc
+echo.
+echo Stand by while copying etc files.
+echo.
+if not exist %GNUS_ETC_DIR% mkdir %GNUS_ETC_DIR%
+xcopy /R /Q /Y gnus-tut.txt %GNUS_ETC_DIR%
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-tut-txt
+if not exist %GNUS_ETC_DIR%\gnus mkdir %GNUS_ETC_DIR%\gnus
+xcopy /R /Q /Y .\gnus\* %GNUS_ETC_DIR%\gnus\
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-gnus-*
+if not exist %GNUS_ETC_DIR%\smilies mkdir %GNUS_ETC_DIR%\smilies
+xcopy /R /Q /Y .\smilies\* %GNUS_ETC_DIR%\smilies\
+if ErrorLevel 1 set ERROR=%ERROR%,copy-etc-smilies-*
+goto warnings
+
+:nocopy
+echo.
+echo ***************************************************************************
+echo * You chose not to copy the files, therefore you should add the
+echo * following lines to the TOP of your [X]emacs customization file:
+echo *
+echo * (add-to-list 'load-path "/Path/to/gnus/lisp")
+echo * (if (featurep 'xemacs)
+echo * (add-to-list 'Info-directory-list "c:/Path/to/gnus/texi/")
+echo * (add-to-list 'Info-default-directory-list "c:/Path/to/gnus/texi/")
+echo * (require 'gnus-load)
+echo *
+echo * Replace c:/Path/to/gnus with the Path where your new Gnus is (that's here
+echo * and yes, you've got to use forward slashes).
+echo ***************************************************************************
+echo.
+
+:warnings
+if not "%subdirwarning%" == "yes" goto warngnusload
+echo.
+echo ***************************************************************************
+echo * There's no subdirs.el file in your site-lisp directory, you should
+echo * therefor add the following line to the TOP of your Emacs
+echo * customization file:
+echo *
+echo * (add-to-list 'load-path "/Path/to/emacs-site-lisp-directory/gnus/lisp")
+echo * (require 'gnus-load)
+echo * Yes, it must be forward slashes.
+echo ***************************************************************************
+echo.
+goto warnerrors
+
+:warngnusload
+echo.
+echo ***************************************************************************
+echo * You should add the following line to the TOP of your Emacs
+echo * customization file:
+echo *
+echo * (require 'gnus-load)
+echo ***************************************************************************
+echo.
+
+:warnerrors
+if "%ERROR%"==":" goto noerrors
+set errorlevel=1
+echo.
+echo ***************************************************************************
+echo * WARNING ERRORS OCCURRED!
+echo * You should look for error messages in the output of the called programs
+echo * and try to find out what exactly went wrong.
+echo * Errors occured in the following modules:
+echo * %ERROR%
+echo ***************************************************************************
+echo.
+goto done
+
+:noerrors
+set errorlevel=0
+
+:done
+cd ..
+goto end
+
+:noemacs
+echo.
+echo ***************************************************************************
+echo * Unable to find emacs.exe or xemacs.exe on the path you specified!
+echo * STOP!
+echo ***************************************************************************
+echo.
+goto usage
+
+:usage
+echo.
+echo ***************************************************************************
+echo * Usage: make.bat :[X]Emacs-exe-dir: [/copy]
+echo *
+echo * where: :[X]Emacs-exe-dir: is the directory your
+echo * emacs.exe respectively xemacs.exe resides in,
+echo * e.g. G:\Programme\XEmacs\XEmacs-21.4.11\i586-pc-win32\
+echo * or G:\Emacs\bin
+echo * /copy indicates that the compiled files should be copied to your
+echo * emacs lisp, info, and etc site directories.
+echo *
+echo * Note: If you have Emacs/w3 you should set the environment variable
+echo * W3DIR to the directory where w3 is installed eg.
+echo * set W3DIR=d:\lisp\w3-4.0pre46\lisp
+echo ***************************************************************************
+echo.
+
+:end
+rem Restore environment variables
+set PWD=%GNUS_PWD_SAVE%
+set GNUS_PWD_SAVE=
+set EMACSBATCH=
+set GNUS_LISP_DIR=
+set GNUS_INFO_DIR=
+set GNUS_ETC_DIR=
+set subdirwarning=
+set ERROR=
projects / gnus / blobdiff