heart's delight at <URL:http://www.gnus.org/> and
<URL:http://quimby.gnus.org/lmi/>.
-;; Copyright (C) 1995 Free Software Foundation, Inc.
+;; Copyright (C) 1995, 2001-2015 Free Software Foundation, Inc.
;; Author: Lars Magne Ingebrigtsen <larsi@ifi.uio.no>
;; Keywords: news
;; This file is part of GNU Emacs.
-;; GNU Emacs is free software; you can redistribute it and/or modify
+;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
-;; any later version.
+;; the Free Software Foundation, either version 3 of the License, or
+;; (at your option) any later version.
;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
+;; along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
From lars Thu Feb 23 23:20:38 1995
From: larsi@gnus.org (ding)
the news is to be found, and from *where*.
Say you want to read news from you local, friendly nntp server
-"news.my.local.server".
+"news.my.local.server".
(setq gnus-select-method '(nntp "news.my.local.server"))
(The same for the other methods, kind of.)
-You should also set `nnmail-split-methods' to something sensible:
+You should also set `nnmail-split-methods' to something sensible:
-(setq nnmail-split-methods
+(setq nnmail-split-methods
'(("mail.junk" "From:.*Lars")
("mail.misc "")))
This will put all mail from me in you junk mail group, and the rest in
-"mail.misc".
+"mail.misc".
These groups will be subscribe the same way as the normal groups, so
you will probably find them among the zombie groups after you set
Subject: Foreign newsgroups
Message-ID: <lars-doc5@eyesore.no>
-These are groups that do not come from `gnus-select-method'.
+These are groups that do not come from `gnus-select-method'.
Say you want to read "alt.furniture.couches" from "news.funet.fi". You
can then either type `B news.funet.fi <RET>' to browse that server and
-subscribe to that group, or you can type
+subscribe to that group, or you can type
`G m alt.furniture.couches<RET>nntp<RET>news.funet.fi<RET>', if you
like to type a lot.
Gnus really isn't GNUS, even though it looks like it. If you scrape
the surface, you'll find that most things have changed.
-This means that old code that relies on GNUS internals will fail.
+This means that old code that relies on GNUS internals will fail.
In particular, `gnus-newsrc-hashtb', `gnus-newsrc-assoc',
`gnus-killed-list', the `nntp-header-' macros and the display formats
(`gnus-group-prepare-hook', `gnus-summary-prepare-hook' and
`gnus-summary-article-hook'). (Well, at the very least the first
two.) Gnus provides various integrated functions for highlighting,
-which are both faster and more accurated.
+which are both faster and more accurate.
There is absolutely no chance, whatsoever, of getting Gnus to work
with Emacs 18. It won't even work on Emacsen older than Emacs
-20.3/XEmacs 20.4. Upgrade your Emacs or die.
+20.7/XEmacs 21.1. Upgrade your Emacs or die.
+
-
From lars Thu Feb 23 23:20:38 1995
From: larsi@gnus.org (ding)
Date: Fri Feb 24 13:40:45 1995
Create the group by saying
-`G V my.virtual.newsgroup<RET>nnvirtual<RET>^rec\.aquaria\.*<RET>'
+`G m my.virtual.newsgroup<RET>nnvirtual<RET>^rec\.aquaria\.*<RET>'
This will create the group "nnvirtual:my.virtual.newsgroup", which
will collect all articles from all the groups in the "rec.aquaria"
-hierarchy.
+hierarchy.
If you want to edit the regular expression, just type `M-e' on the
group line.
(setq gnus-select-group-hook
(lambda ()
- (if (eq 'nnvirtual (car (gnus-find-method-for-group
+ (if (eq 'nnvirtual (car (gnus-find-method-for-group
gnus-newsgroup-name)))
(progn
(make-local-variable 'gnus-thread-sort-functions)
give me a precise overview of your Gnus and Emacs version numbers,
along with a look at all Gnus variables you have changed.
-Du not expect a reply back, but your bug should be fixed in the next
+Do not expect a reply back, but your bug should be fixed in the next
version. If the bug persists, please re-submit your bug report.
When a bug occurs, I need a recipe for how to trigger the bug. You
have to tell me exactly what you do to uncover the bug, and you should
(setq debug-on-error t) and send me the backtrace along with the bug
-report.
+report.
If I am not able to reproduce the bug, I won't be able to fix it.
I would, of course, prefer that you locate the bug, fix it, and mail
-me the patches, but one can't have everything.
+me the patches, but one can't have everything.
If you have any questions on usage, the "ding@gnus.org" mailing list
is where to post the questions.
From fschmitt Sat Mar 22 18:13:00 2003
From: faq@my.gnus.org (Gnus FAQ team)
Date: Sat Mar 22 18:13:00 2003
-Subject: Gnus FAQ
-Message-ID: <lars-doc8@eyesore.no>
+Subject: Gnus FAQ (Frequently Asked Questions)
+Message-ID: <lars-doc9@eyesore.no>
+
+The Gnus FAQ is distributed within the Gnus manual. The home page of
+the Gnus FAQ is <URL:http://my.gnus.org/FAQ/>, where you can find the
+most recent version in HTML various other formats.
+
+To browse the FAQ now, put the cursor at the end of the following line
+and press `C-x C-e':
+
+ (info "(gnus)Frequently Asked Questions")
+
+On older XEmacs version, use:
+
+ (Info-goto-node "(gnus)Frequently Asked Questions")
-This is the text version of the Gnus FAQ, see http://my.gnus.org for
-the up to date version of this document, there you can also find a
-html version and various other formats.
-
-Frequently Asked Questions
-
-Table of Contents
-
-Introduction
-Frequently Asked Questions with Answers
-Glossary
-
-Abstract
-
-This is the new Gnus Frequently Asked Questions list. If you have a
-Web browser, the official hypertext version is at http://
-my.gnus.org/FAQ/ [http://my.gnus.org/FAQ/], the Docbook source is
-available from http://sourceforge.net [http://sourceforge.net/
-projects/gnus/].
-
-Please submit features and suggestions to the FAQ discussion list
-[mailto:faq-discuss@my.gnus.org]. The list is protected against
-junk mail with qconfirm [http://smarden.org/qconfirm/index.html].
-As a subscriber, your submissions will automatically pass. You can
-also subscribe to the list by sending a blank email to
-faq-discuss-subscribe@my.gnus.org
-[mailto:faq-discuss-subscribe@my.gnus.org] and browse the archive.
-
-Introduction
-
-This is the Gnus Frequently Asked Questions list.
-
-Gnus is a Usenet Newsreader and Electronic Mail User Agent
-implemented as a part of Emacs. It's been around in some form for
-almost a decade now, and has been distributed as a standard part of
-Emacs for much of that time. Gnus 5 is the latest (and greatest)
-incarnation. The original version was called GNUS, and was written
-by Masanobu UMEDA. When autumn crept up in '94, Lars Magne
-Ingebrigtsen grew bored and decided to rewrite Gnus.
-
-Its biggest strength is the fact that it is extremely customizable.
-It is somewhat intimidating at first glance, but most of the
-complexity can be ignored until you're ready to take advantage of
-it. If you receive a reasonable volume of e-mail (you're on various
-mailing lists), or you would like to read high-volume mailing lists
-but cannot keep up with them, or read high volume newsgroups or are
-just bored, then Gnus is what you want.
-
-This FAQ was maintained by Justin Sheehy until March 2002. He would
-like to thank Steve Baur and Per Abrahamsen for doing a wonderful
-job with this FAQ before him. We would like to do the same -
-thanks, Justin!
-
-If you have a Web browser, the official hypertext version is at:
-http://my.gnus.org/FAQ/ [http://my.gnus.org/FAQ/]. This version is
-much nicer than the unofficial hypertext versions that are archived
-at Utrecht, Oxford, Smart Pages, Ohio State, and other FAQ
-archives. See the resources question below if you want information
-on obtaining it in another format.
-
-The information contained here was compiled with the assistance of
-the Gnus development mailing list, and any errors or misprints are
-the my.gnus.org team's fault, sorry.
-
-Frequently Asked Questions with Answers
-
-1. Installation FAQ
-
- 1.1. What is the latest version of Gnus?
- 1.2. Where and how to get Gnus?
- 1.3. What to do with the tarball now?
- 1.4. Which version of Emacs do I need?
- 1.5. How do I run Gnus on both Emacs and XEmacs?
-
-2. Startup / Group buffer
-
- 2.1. Every time I start Gnus I get a message "Gnus auto-save
- file exists. Do you want to read it?", what does this mean
- and how to prevent it?
- 2.2. Gnus doesn't remember which groups I'm subscribed to,
- what's this?
- 2.3. How to change the format of the lines in Group buffer?
- 2.4. My group buffer becomes a bit crowded, is there a way to
- sort my groups into categories so I can easier browse
- through them?
- 2.5. How to manually sort the groups in Group buffer? How to
- sort the groups in a topic?
-
-3. Getting Messages
-
- 3.1. I just installed Gnus, started it via M-x gnus but it only
- says "nntp (news) open error", what to do?
- 3.2. I'm working under Windows and have no idea what ~/.gnus
- means.
- 3.3. My news server requires authentication, how to store user
- name and password on disk?
- 3.4. Gnus seems to start up OK, but I can't find out how to
- subscribe to a group.
- 3.5. Gnus doesn't show all groups / Gnus says I'm not allowed
- to post on this server as well as I am, what's that?
- 3.6. I want Gnus to fetch news from several servers, is this
- possible?
- 3.7. And how about local spool files?
- 3.8. OK, reading news works now, but I want to be able to read
- my mail with Gnus, too. How to do it?
- 3.9. And what about IMAP?
- 3.10. At the office we use one of those MS Exchange servers,
- can I use Gnus to read my mail from it?
- 3.11. Can I tell Gnus not to delete the mails on the server it
- retrieves via POP3?
-
-4. Reading messages
-
- 4.1. When I enter a group, all read messages are gone. How to
- view them again?
- 4.2. How to tell Gnus to show an important message every time I
- enter a group, even when it's read?
- 4.3. How to view the headers of a message?
- 4.4. How to view the raw unformatted message?
- 4.5. How can I change the headers Gnus displays by default at
- the top of the article buffer?
- 4.6. I'd like Gnus NOT to render HTML-mails but show me the
- text part if it's available. How to do it?
- 4.7. Can I use some other browser than w3 to render my
- HTML-mails?
- 4.8. Is there anything I can do to make poorly formatted mails
- more readable?
- 4.9. Is there a way to automatically ignore posts by specific
- authors or with specific words in the subject? And can I
- highlight more interesting ones in some way?
- 4.10. How can I disable threading in some (e.g. mail-) groups,
- or set other variables specific for some groups?
- 4.11. Can I highlight messages written by me and follow-ups to
- those?
- 4.12. The number of total messages in a group which Gnus
- displays in group buffer is by far to high, especially in
- mail groups. Is this a bug?
- 4.13. I don't like the layout of summary and article buffer,
- how to change it? Perhaps even a three pane display?
- 4.14. I don't like the way the Summary buffer looks, how to
- tweak it?
- 4.15. How to split incoming mails in several groups?
-
-5. Composing messages
-
- 5.1. What are the basic commands I need to know for sending
- mail and postings?
- 5.2. How to enable automatic word-wrap when composing messages?
- 5.3. How to set stuff like From, Organization, Reply-To,
- signature...?
- 5.4. Can I set things like From, Signature etc group based on
- the group I post too?
- 5.5. Is there a spell-checker? Perhaps even on-the-fly
- spell-checking?
- 5.6. Can I set the dictionary based on the group I'm posting
- to?
- 5.7. Is there some kind of address-book, so I needn't remember
- all those email addresses?
- 5.8. Sometimes I see little images at the top of article
- buffer. What's that and how can I send one with my
- postings, too?
- 5.9. Sometimes I accidentally hit r instead of f in newsgroups.
- Can Gnus warn me, when I'm replying by mail in newsgroups?
- 5.10. How to tell Gnus not to generate a sender header?
- 5.11. I want gnus to locally store copies of my send mail and
- news, how to do it?
- 5.12. People tell me my Message-IDs are not correct, why aren't
- they and how to fix it?
-
-6. Old messages
-
- 6.1. How to import my old mail into Gnus?
- 6.2. How to archive interesting messages?
- 6.3. How to search for a specific message?
- 6.4. How to get rid of old unwanted mail?
- 6.5. I want that all read messages are expired (at least in
- some groups). How to do it?
- 6.6. I don't want expiration to delete my mails but to move
- them to another group.
-
-7. Getting help
-
- 7.1. How to find information and help inside Emacs?
- 7.2. I can't find anything in the Gnus manual about X (e.g.
- attachments, PGP, MIME...), is it not documented?
- 7.3. Which websites should I know?
- 7.4. Which mailing lists and newsgroups are there?
- 7.5. Where to report bugs?
- 7.6. I need real-time help, where to find it?
-
-8. Tuning Gnus
-
- 8.1. Starting Gnus is really slow, how to speed it up?
- 8.2. How to speed up the process of entering a group?
- 8.3. Sending mail becomes slower and slower, what's up?
-
-1. Installation FAQ
-
-1.1. What is the latest version of Gnus?
-
- As of this posting, the latest Gnus version is 5.8.8(which is
- basically the same as Gnus 5.9 which is shipped with GNU Emacs).
- This version is very stable and should be the choice for all
- beginners. However 5.8.8 is quite old, so many people today use the
- BETA version from CVS called Oort Gnus, which contains a huge
- amount of new features. If you want to do this too, be aware that
- it's beta and might have bugs and at worst case might eat your
- mail.
-
-1.2. Where and how to get Gnus?
-
- The latest released version of Gnus is included in Emacs 21 and
- available through the package system of XEmacs 21.4, so the easiest
- way is getting one of those. If you don't want or can't do this,
- get the Gnus tarball from http://www.gnus.org/dist/gnus.tar.gz
- [http://www.gnus.org/dist/gnus.tar.gz] or via anonymous FTP from
- ftp://ftp.gnus.org/pub/gnus/gnus.tar.gz [ftp://ftp.gnus.org/pub/
- gnus/gnus.tar.gz].
-
-1.3. What to do with the tarball now?
-
- Untar it via tar xvzf gnus.tar.gz and do the common ./configure;
- make; make install circle. (under MS-Windows either get the Cygwin
- environment from http://www.cygwin.com [http://www.cygwin.com]
- which allows you to do what's described above or unpack the tarball
- with some packer (e.g. Winace from http://www.winace.com [http://
- www.winace.com]) and use the batch-file make.bat included in the
- tarball to install Gnus. If you don't want to (or aren't allowed
- to) install Gnus system-wide, you can install it in your home
- directory and add the following lines to your ~/.xemacs/init.el or
- ~/.emacs:
-
- (add-to-list 'load-path "/path/to/gnus/lisp")
- (if (featurep 'xemacs)
- (add-to-list 'Info-directory-list "/path/to/gnus/texi/")
- (add-to-list 'Info-default-directory-list "/path/to/gnus/texi/"))
-
-
- Make sure that you don't have any gnus related stuff before this
- line, on MS Windows use something like "C:/path/to/lisp" (yes, "/
- ").
-
-1.4. Which version of Emacs do I need?
-
- Gnus 5.8.8 requires an emacs version that is greater than or equal
- to Emacs 20.3 or XEmacs 20.1.
-
-1.5. How do I run Gnus on both Emacs and XEmacs?
-
- You can't use the same copy of Gnus in both as the Lisp files are
- byte-compiled to a format which is different depending on which
- Emacs did the compilation. Get one copy of Gnus for Emacs and one
- for XEmacs.
-
-2. Startup / Group buffer
-
-2.1. Every time I start Gnus I get a message "Gnus auto-save file
- exists. Do you want to read it?", what does this mean and how to
- prevent it?
-
- This message means that the last time you used Gnus, it wasn't
- properly exited and therefor couldn't write its informations to
- disk (e.g. which messages you read), you are now asked if you want
- to restore those informations from the auto-save file.
-
- To prevent this message make sure you exit Gnus via q in group
- buffer instead of just killing Emacs.
-
-2.2. Gnus doesn't remember which groups I'm subscribed to, what's this?
-
- You get the message described in the q/a pair above while starting
- Gnus, right? It's an other symptom for the same problem, so read
- the answer above.
-
-2.3. How to change the format of the lines in Group buffer?
-
- You've got to tweak the value of the variable
- gnus-group-line-format. See the manual node "Group Line
- Specification" for information on how to do this. An example for
- this (guess from whose .gnus :-)):
-
- (setq gnus-group-line-format "%P%M%S[%5t]%5y : %(%g%)\n")
-
-
-2.4. My group buffer becomes a bit crowded, is there a way to sort my
- groups into categories so I can easier browse through them?
-
- Gnus offers the topic mode, it allows you to sort your groups in,
- well, topics, e.g. all groups dealing with Linux under the topic
- linux, all dealing with music under the topic music and all dealing
- with scottish music under the topic scottish which is a subtopic of
- music.
-
- To enter topic mode, just hit t while in Group buffer. Now you can
- use T n to create a topic at point and T m to move a group to a
- specific topic. For more commands see the manual or the menu. You
- might want to include the %P specifier at the beginning of your
- gnus-group-line-format variable to have the groups nicely indented.
-
-2.5. How to manually sort the groups in Group buffer? How to sort the
- groups in a topic?
-
- Move point over the group you want to move and hit C-k, now move
- point to the place where you want the group to be and hit C-y.
-
-3. Getting Messages
-
-3.1. I just installed Gnus, started it via M-x gnus but it only says
- "nntp (news) open error", what to do?
-
- You've got to tell Gnus where to fetch the news from. Read the
- documentation for information on how to do this. As a first start,
- put those lines in ~/.gnus:
-
- (setq gnus-select-method '(nntp "news.yourprovider.net"))
- (setq user-mail-address "you@yourprovider.net")
- (setq user-full-name "Your Name")
-
-
-3.2. I'm working under Windows and have no idea what ~/.gnus means.
-
- The ~/ means the home directory where Gnus and Emacs look for the
- configuration files. However, you don't really need to know what
- this means, it suffices that Emacs knows what it means :-) You can
- type C-x C-f ~/.gnus RET (yes, with the forward slash, even on
- Windows), and Emacs will open the right file for you. (It will most
- likely be new, and thus empty.) However, I'd discourage you from
- doing so, since the directory Emacs chooses will most certainly not
- be what you want, so let's do it the correct way. The first thing
- you've got to do is to create a suitable directory (no blanks in
- directory name please) e.g. c:\myhome. Then you must set the
- environment variable HOME to this directory. To do this under Win9x
- or Me include the line
-
- SET HOME=C:\myhome
-
-
- in your autoexec.bat and reboot. Under NT, 2000 and XP, hit
- Winkey+Pause/Break to enter system options (if it doesn't work, go
- to Control Panel -> System). There you'll find the possibility to
- set environment variables, create a new one with name HOME and
- value C:\myhome, a reboot is not necessary.
-
- Now to create ~/.gnus, say C-x C-f ~/.gnus RET C-x C-s. in Emacs.
-
-3.3. My news server requires authentication, how to store user name and
- password on disk?
-
- Create a file ~/.authinfo which includes for each server a line
- like this
-
- machine news.yourprovider.net login YourUserName password YourPassword
-
- . Make sure that the file isn't readable to others if you work on a
- OS which is capable of doing so. (Under Unix say
-
- chmod 600 ~/.authinfo
-
- in a shell.)
-
-3.4. Gnus seems to start up OK, but I can't find out how to subscribe to
- a group.
-
- If you know the name of the group say U name.of.group RET in group
- buffer (use the tab-completion Luke). Otherwise hit ^ in group
- buffer, this brings you to the server buffer. Now place point (the
- cursor) over the server which carries the group you want, hit RET,
- move point to the group you want to subscribe to and say u to
- subscribe to it.
-
-3.5. Gnus doesn't show all groups / Gnus says I'm not allowed to post on
- this server as well as I am, what's that?
-
- Some providers allow restricted anonymous access and full access
- only after authorization. To make Gnus send authinfo to those
- servers append
-
- force yes
-
- to the line for those servers in ~/.authinfo.
-
-3.6. I want Gnus to fetch news from several servers, is this possible?
-
- Of course. You can specify more sources for articles in the
- variable gnus-secondary-select-methods. Add something like this in
- ~/.gnus:
-
- (add-to-list 'gnus-secondary-select-methods '(nntp "news.yourSecondProvider.net"))
- (add-to-list 'gnus-secondary-select-methods '(nntp "news.yourThirdProvider.net"))
-
-
-3.7. And how about local spool files?
-
- No problem, this is just one more select method called nnspool, so
- you want this:
-
- (add-to-list 'gnus-secondary-select-methods '(nnspool ""))
-
-
- Or this if you don't want an NNTP Server as primary news source:
-
- (setq gnus-select-method '(nnspool ""))
-
-
- Gnus will look for the spool file in /usr/spool/news, if you want
- something different, change the line above to something like this:
-
- (add-to-list 'gnus-secondary-select-methods
- '(nnspool "" (nnspool-directory "/usr/local/myspoolddir")))
-
-
- This sets the spool directory for this server only. You might have
- to specify more stuff like the program used to post articles, see
- the Gnus manual on how to do this.
-
-3.8. OK, reading news works now, but I want to be able to read my mail
- with Gnus, too. How to do it?
-
- That's a bit harder since there are many possible sources for mail,
- many possible ways for storing mail and many different ways for
- sending mail. The most common cases are these: 1: You want to read
- your mail from a pop3 server and send them directly to a SMTP
- Server 2: Some program like fetchmail retrieves your mail and
- stores it on disk from where Gnus shall read it. Outgoing mail is
- sent by Sendmail, Postfix or some other MTA. Sometimes, you even
- need a combination of the above cases.
-
- However, the first thing to do is to tell Gnus in which way it
- should store the mail, in Gnus terminology which back end to use.
- Gnus supports many different back ends, the most commonly used one
- is nnml. It stores every mail in one file and is therefor quite
- fast. However you might prefer a one file per group approach if
- your file system has problems with many small files, the nnfolder
- back end is then probably the choice for you. To use nnml add the
- following to ~/.gnus:
-
- (add-to-list 'gnus-secondary-select-methods '(nnml ""))
-
-
- As you might have guessed, if you want nnfolder, it's
-
- (add-to-list 'gnus-secondary-select-methods '(nnfolder ""))
-
-
- Now we need to tell Gnus, where to get it's mail from. If it's a
- POP3 server, then you need something like this:
-
- (eval-after-load "mail-source"
- '(add-to-list 'mail-sources '(pop :server "pop.YourProvider.net"
- :user "yourUserName"
- :password "yourPassword"))
-
-
- Make sure ~/.gnus isn't readable to others if you store your
- password there. If you want to read your mail from a traditional
- spool file on your local machine, it's
-
- (eval-after-load "mail-source"
- '(add-to-list 'mail-sources '(file :path "/path/to/spool/file"))
-
-
- If it's a Maildir, with one file per message as used by postfix,
- Qmail and (optionally) fetchmail it's
-
- (eval-after-load "mail-source"
- '(add-to-list 'mail-sources '(maildir :path "/path/to/Maildir/"
- :subdirs ("cur" "new")))
-
-
- And finally if you want to read your mail from several files in one
- directory, for example because procmail already split your mail,
- it's
-
- (eval-after-load "mail-source"
- '(add-to-list 'mail-sources '(directory :path "/path/to/procmail-dir/"
- :suffix ".prcml"))
-
-
- Where :suffix ".prcml" tells Gnus only to use files with the suffix
- .prcml.
-
- OK, now you only need to tell Gnus how to send mail. If you want to
- send mail via sendmail (or whichever MTA is playing the role of
- sendmail on your system), you don't need to do anything. However,
- if you want to send your mail to an SMTP Server you need the
- following in your ~/.gnus
-
- (setq send-mail-function 'smtpmail-send-it)
- (setq message-send-mail-function 'smtpmail-send-it)
- (setq smtpmail-default-smtp-server "smtp.yourProvider.net")
-
-
-3.9. And what about IMAP?
-
- There are two ways of using IMAP with Gnus. The first one is to use
- IMAP like POP3, that means Gnus fetches the mail from the IMAP
- server and stores it on disk. If you want to do this (you don't
- really want to do this) add the following to ~/.gnus
-
- (add-to-list 'mail-sources '(imap :server "mail.mycorp.com"
- :user "username"
- :pass "password"
- :stream network
- :authentication login
- :mailbox "INBOX"
- :fetchflag "\\Seen"))
-
-
- You might have to tweak the values for stream and/or
- authentification, see the Gnus manual node "Mail Source Specifiers"
- for possible values.
-
- If you want to use IMAP the way it's intended, you've got to follow
- a different approach. You've got to add the nnimap back end to your
- select method and give the information about the server there.
-
- (add-to-list 'gnus-secondary-select-methods
- '(nnimap "Give the baby a name"
- (nnimap-address "imap.yourProvider.net")
- (nnimap-port 143)
- (nnimap-list-pattern "archive.*")))
-
-
- Again, you might have to specify how to authenticate to the server
- if Gnus can't guess the correct way, see the Manual Node "IMAP" for
- detailed information.
-
-3.10. At the office we use one of those MS Exchange servers, can I use
- Gnus to read my mail from it?
-
- Offer your administrator a pair of new running shoes for activating
- IMAP on the server and follow the instructions above.
-
-3.11. Can I tell Gnus not to delete the mails on the server it retrieves
- via POP3?
-
- First of all, that's not the way POP3 is intended to work, if you
- have the possibility, you should use the IMAP Protocol if you want
- your messages to stay on the server. Nevertheless there might be
- situations where you need the feature, but sadly Gnus itself has no
- predefined functionality to do so.
-
- However this is Gnus county so there are possibilities to achieve
- what you want. The easiest way is to get an external program which
- retrieves copies of the mail and stores them on disk, so Gnus can
- read it from there. On Unix systems you could use e.g. fetchmail
- for this, on MS Windows you can use Hamster, an excellent local
- news and mail server.
-
- The other solution would be, to replace the method Gnus uses to get
- mail from POP3 servers by one which is capable of leaving the mail
- on the server. If you use XEmacs, get the package mail-lib, it
- includes an enhanced pop3.el, look in the file, there's
- documentation on how to tell Gnus to use it and not to delete the
- retrieved mail. For GNU Emacs look for the file epop3.el which can
- do the same (If you know the home of this file, please send me an
- e-mail). You can also tell Gnus to use an external program (e.g.
- fetchmail) to fetch your mail, see the info node "Mail Source
- Specifiers" in the Gnus manual on how to do it.
-
-4. Reading messages
-
-4.1. When I enter a group, all read messages are gone. How to view them
- again?
-
- If you enter the group by saying RET in summary buffer with point
- over the group, only unread and ticked messages are loaded. Say C-u
- RET instead to load all available messages. If you want only the
- e.g. 300 newest say C-u 300 RET
-
- Loading only unread messages can be annoying if you have threaded
- view enabled, say
-
- (setq gnus-fetch-old-headers 'some)
-
-
- in ~/.gnus to load enough old articles to prevent teared threads,
- replace 'some with t to load all articles (Warning: Both settings
- enlarge the amount of data which is fetched when you enter a group
- and slow down the process of entering a group).
-
- If you use Oort Gnus, you can say /o N In summary buffer to load
- the last N messages, this feature is not available in 5.8.8
-
- If you don't want all old messages, but the parent of the message
- you're just reading, you can say ^, if you want to retrieve the
- whole thread the message you're just reading belongs to, A T is
- your friend.
-
-4.2. How to tell Gnus to show an important message every time I enter a
- group, even when it's read?
-
- You can tick important messages. To do this hit u while point is in
- summary buffer over the message. When you want to remove the mark,
- hit either d (this deletes the tick mark and set's unread mark) or
- M c (which deletes all marks for the message).
-
-4.3. How to view the headers of a message?
-
- Say t to show all headers, one more t hides them again.
-
-4.4. How to view the raw unformatted message?
-
- Say C-u g to show the raw message g returns to normal view.
-
-4.5. How can I change the headers Gnus displays by default at the top of
- the article buffer?
-
- The variable gnus-visible-headers controls which headers are shown,
- its value is a regular expression, header lines which match it are
- shown. So if you want author, subject, date, and if the header
- exists, Followup-To and MUA / NUA say this in ~/.gnus:
-
- (setq gnus-visible-headers
- "^\\(From:\\|Subject:\\|Date:\\|Followup-To:\\|X-Newsreader:\\|User-Agent:\\|X-Mailer:\\)")
-
-
-4.6. I'd like Gnus NOT to render HTML-mails but show me the text part if
- it's available. How to do it?
-
- Say
-
- (eval-after-load "mm-decode"
- '(progn
- (add-to-list 'mm-discouraged-alternatives "text/html")
- (add-to-list 'mm-discouraged-alternatives "text/richtext")))
-
-
- in ~/.gnus. If you don't want HTML rendered, even if there's no
- text alternative add
-
- (setq mm-automatic-display (remove "text/html" mm-automatic-display))
-
-
- too.
-
-4.7. Can I use some other browser than w3 to render my HTML-mails?
-
- Only if you use Oort Gnus. In this case you've got the choice
- between w3, w3m, links, lynx and html2text, which one is used can
- be specified in the variable mm-text-html-renderer, so if you want
- links to render your mail say
-
- (setq mm-text-html-renderer 'links)
-
-
-4.8. Is there anything I can do to make poorly formatted mails more
- readable?
-
- Gnus offers you several functions to "wash" incoming mail, you can
- find them if you browse through the menu, item Article->Washing.
- The most interesting ones are probably "Wrap long lines" ( W w ),
- "Decode ROT13" ( W r ) and "Outlook Deuglify" which repairs the
- dumb quoting used by many users of Microsoft products ( W k ) sadly
- the last one is only available in Oort Gnus.
-
-4.9. Is there a way to automatically ignore posts by specific authors or
- with specific words in the subject? And can I highlight more
- interesting ones in some way?
-
- You want Scoring. Scoring means, that you define rules which assign
- each message an integer value. Depending on the value the message
- is highlighted in summary buffer (if it's high, say +2000) or
- automatically marked read (if the value is low, say -800) or some
- other action happens.
-
- There are basically three ways of setting up rules which assign the
- scoring-value to messages. The first and easiest way is to set up
- rules based on the article you are just reading. Say you're reading
- a message by a guy who always writes nonsense and you want to
- ignore his messages in the future. Hit L, to set up a rule which
- lowers the score. Now Gnus asks you which the criteria for lowering
- the Score shall be. Hit ? twice to see all possibilities, we want a
- which means the author (the from header). Now Gnus wants to know
- which kind of matching we want. Hit either e for an exact match or
- s for substring-match and delete afterwards everything but the name
- to score down all authors with the given name no matter which email
- address is used. Now you need to tell Gnus when to apply the rule
- and how long it should last, hit e.g. p to apply the rule now and
- let it last forever. If you want to raise the score instead of
- lowering it say I instead of L.
-
- You can also set up rules by hand. To do this say V f in summary
- buffer. Then you are asked for the name of the score file, it's
- name.of.group.SCORE for rules valid in only one group or all.Score
- for rules valid in all groups. See the Gnus manual for the exact
- syntax, basically it's one big list whose elements are lists again.
- the first element of those lists is the header to score on, then
- one more list with what to match, which score to assign, when to
- expire the rule and how to do the matching. If you find me very
- interesting, you could e.g. add the following to your all.Score:
-
- (("references" ("hschmi22.userfqdn.rz-online.de" 500 nil s))
- ("message-id" ("hschmi22.userfqdn.rz-online.de" 999 nil s)))
-
-
- This would add 999 to the score of messages written by me and 500
- to the score of messages which are a (possibly indirect) answer to
- a message written by me. Of course nobody with a sane mind would do
- this :-)
-
- The third alternative is adaptive scoring. This means Gnus watches
- you and tries to find out what you find interesting and what
- annoying and sets up rules which reflect this. Adaptive scoring can
- be a huge help when reading high traffic groups. If you want to
- activate adaptive scoring say
-
- (setq gnus-use-adaptive-scoring t)
-
-
- in ~/.gnus.
-
-4.10. How can I disable threading in some (e.g. mail-) groups, or set
- other variables specific for some groups?
-
- While in group buffer move point over the group and hit G c, this
- opens a buffer where you can set options for the group. At the
- bottom of the buffer you'll find an item that allows you to set
- variables locally for the group. To disable threading enter
- gnus-show-threads as name of variable and nil as value. Hit button
- done at the top of the buffer when you're ready.
-
-4.11. Can I highlight messages written by me and follow-ups to those?
-
- Stop those "Can I ..." questions, the answer is always yes in Gnus
- Country :-). It's a three step process: First we make faces
- (specifications of how summary-line shall look like) for those
- postings, then we'll give them some special score and finally we'll
- tell Gnus to use the new faces. You can find detailed instructions
- on how to do it on my.gnus.org [http://my.gnus.org/Members/dzimmerm
- /HowTo%2C2002-07-25%2C1027619165012198456/view]
-
-4.12. The number of total messages in a group which Gnus displays in
- group buffer is by far to high, especially in mail groups. Is this
- a bug?
-
- No, that's a matter of design of Gnus, fixing this would mean
- reimplementation of major parts of Gnus' back ends. Gnus thinks
- "highest-article-number - lowest-article-number =
- total-number-of-articles". This works OK for Usenet groups, but if
- you delete and move many messages in mail groups, this fails. To
- cure the symptom, enter the group via C-u RET (this makes Gnus get
- all messages), then hit M P b to mark all messages and then say B m
- name.of.group to move all messages to the group they have been in
- before, they get new message numbers in this process and the count
- is right again (until you delete and move your mail to other groups
- again).
-
-4.13. I don't like the layout of summary and article buffer, how to
- change it? Perhaps even a three pane display?
-
- You can control the windows configuration by calling the function
- gnus-add-configuration. The syntax is a bit complicated but
- explained very well in the manual node "Window Layout". Some
- popular examples:
-
- Instead 25% summary 75% article buffer 35% summary and 65% article
- (the 1.0 for article means "take the remaining space"):
-
- (gnus-add-configuration '(article (vertical 1.0 (summary .35 point) (article 1.0))))
-
-
- A three pane layout, Group buffer on the left, summary buffer
- top-right, article buffer bottom-right:
-
- (gnus-add-configuration
- '(article
- (horizontal 1.0
- (vertical 25
- (group 1.0))
- (vertical 1.0
- (summary 0.25 point)
- (article 1.0)))))
- (gnus-add-configuration
- '(summary
- (horizontal 1.0
- (vertical 25
- (group 1.0))
- (vertical 1.0
- (summary 1.0 point)))))
-
-
-4.14. I don't like the way the Summary buffer looks, how to tweak it?
-
- You've got to play around with the variable
- gnus-summary-line-format. It's value is a string of symbols which
- stand for things like author, date, subject etc. A list of the
- available specifiers can be found in the manual node "Summary
- Buffer Lines" and the often forgotten node "Formatting Variables"
- and it's sub-nodes. There you'll find useful things like
- positioning the cursor and tabulators which allow you a summary in
- table form, but sadly hard tabulators are broken in 5.8.8.
-
- Oort Gnus offers you some very nice new specifiers, e.g. %B which
- draws a thread-tree and %&user-date which gives you a date where
- the details are dependent of the articles age. Here's an example
- which uses both, DON'T TRY TO USE IT WITH 5.8.8!
-
- (setq gnus-summary-line-format ":%U%R %B %s %-60=|%4L |%-20,20f |%&user-date; \n")
-
-
- resulting in:
-
- :O Re: [Richard Stallman] rfc2047.el | 13 |Lars Magne Ingebrigt |Sat 23:06
- :O Re: Revival of the ding-patches list | 13 |Lars Magne Ingebrigt |Sat 23:12
- :R > Re: Find correct list of articles for a gro| 25 |Lars Magne Ingebrigt |Sat 23:16
- :O \-> ... | 21 |Kai Grossjohann | 0:01
- :R > Re: Cry for help: deuglify.el - moving stuf| 28 |Lars Magne Ingebrigt |Sat 23:34
- :O \-> ... | 115 |Raymond Scholz | 1:24
- :O \-> ... | 19 |Lars Magne Ingebrigt |15:33
- :O Slow mailing list | 13 |Lars Magne Ingebrigt |Sat 23:49
- :O Re: `@' mark not documented | 13 |Lars Magne Ingebrigt |Sat 23:50
- :R > Re: Gnus still doesn't count messages prope| 23 |Lars Magne Ingebrigt |Sat 23:57
- :O \-> ... | 18 |Kai Grossjohann | 0:35
- :O \-> ... | 13 |Lars Magne Ingebrigt | 0:56
-
-
-4.15. How to split incoming mails in several groups?
-
- Gnus offers two possibilities for splitting mail, the easy
- nnmail-split-methods and the more powerful Fancy Mail Splitting.
- I'll only talk about the first one, refer to the manual, node
- "Fancy Mail Splitting" for the latter.
-
- The value of nnmail-split-methods is a list, each element is a list
- which stands for a splitting rule. Each rule has the form "group
- where matching articles should go to", "regular expression which
- has to be matched", the first rule which matches wins. The last
- rule must always be a general rule (regular expression .*) which
- denotes where articles should go which don't match any other rule.
- If the folder doesn't exist yet, it will be created as soon as an
- article lands there. By default the mail will be send to all groups
- whose rules match. If you don't want that (you probably don't
- want), say
-
- (setq nnmail-crosspost nil)
-
-
- in ~/.gnus.
-
- An example might be better than thousand words, so here's my
- nnmail-split-methods. Note that I send duplicates in a special
- group and that the default group is spam, since I filter all mails
- out which are from some list I'm subscribed to or which are
- addressed directly to me before. Those rules kill about 80% of the
- Spam which reaches me (Email addresses are changed to prevent
- spammers from using them):
-
- (setq nnmail-split-methods
- '(("duplicates" "^Gnus-Warning:.*duplicate")
- ("XEmacs-NT" "^\\(To:\\|CC:\\).*localpart@xemacs.bla.*")
- ("Gnus-Tut" "^\\(To:\\|CC:\\).*localpart@socha.bla.*")
- ("tcsh" "^\\(To:\\|CC:\\).*localpart@mx.gw.bla.*")
- ("BAfH" "^\\(To:\\|CC:\\).*localpart@.*uni-muenchen.bla.*")
- ("Hamster-src" "^\\(CC:\\|To:\\).*hamster-sourcen@yahoogroups.\\(de\\|com\\).*")
- ("Tagesschau" "^From: tagesschau <localpart@www.tagesschau.bla>$")
- ("Replies" "^\\(CC:\\|To:\\).*localpart@Frank-Schmitt.bla.*")
- ("EK" "^From:.*\\(localpart@privateprovider.bla\\|localpart@workplace.bla\\).*")
- ("Spam" "^Content-Type:.*\\(ks_c_5601-1987\\|EUC-KR\\|big5\\|iso-2022-jp\\).*")
- ("Spam" "^Subject:.*\\(This really work\\|XINGA\\|ADV:\\|XXX\\|adult\\|sex\\).*")
- ("Spam" "^Subject:.*\\(\=\?ks_c_5601-1987\?\\|\=\?euc-kr\?\\|\=\?big5\?\\).*")
- ("Spam" "^X-Mailer:\\(.*BulkMailer.*\\|.*MIME::Lite.*\\|\\)")
- ("Spam" "^X-Mailer:\\(.*CyberCreek Avalanche\\|.*http\:\/\/GetResponse\.com\\)")
- ("Spam" "^From:.*\\(verizon\.net\\|prontomail\.com\\|money\\|ConsumerDirect\\).*")
- ("Spam" "^Delivered-To: GMX delivery to spamtrap@gmx.bla$")
- ("Spam" "^Received: from link2buy.com")
- ("Spam" "^CC: .*azzrael@t-online.bla")
- ("Spam" "^X-Mailer-Version: 1.50 BETA")
- ("Uni" "^\\(CC:\\|To:\\).*localpart@uni-koblenz.bla.*")
- ("Inbox" "^\\(CC:\\|To:\\).*\\(my\ name\\|address@one.bla\\|adress@two.bla\\)")
- ("Spam" "")))
-
-
-5. Composing messages
-
-5.1. What are the basic commands I need to know for sending mail and
- postings?
-
- To start composing a new mail hit m either in Group or Summary
- buffer, for a posting, it's either a in Group buffer and filling
- the Newsgroups header manually or a in the Summary buffer of the
- group where the posting shall be send to. Replying by mail is r if
- you don't want to cite the author, or import the cited text
- manually and R to cite the text of the original message. For a
- follow up to a newsgroup, it's f and F (analog to r and R.
-
- Enter new headers above the line saying "--text follows this
- line--", enter the text below the line. When ready hit C-c C-c, to
- send the message, if you want to finish it later hit C-c C-d to
- save it in the drafts group, where you can start editing it again
- by saying D e.
-
-5.2. How to enable automatic word-wrap when composing messages?
-
- Say
-
- (add-hook 'message-mode-hook
- (lambda ()
- (setq fill-column 72)
- (turn-on-auto-fill)))
-
-
- in ~/.gnus. You can reformat a paragraph by hitting M-q (as usual)
-
-5.3. How to set stuff like From, Organization, Reply-To, signature...?
-
- There are other ways, but you should use posting styles for this.
- (See below why). This example should make the syntax clear:
-
- (setq gnus-posting-styles
- '((".*"
- (name "Frank Schmitt")
- (address "me@there.bla")
- (organization "Hamme net, kren mer och nimmi")
- (signature-file "~/.signature")
- ("X-SampleHeader" "foobar")
- (eval (setq some-variable "Foo bar")))))
-
-
- The ".*" means that this settings are the default ones (see below),
- valid values for the first element of the following lists are
- signature, signature-file, organization, address, name or body. The
- attribute name can also be a string. In that case, this will be
- used as a header name, and the value will be inserted in the
- headers of the article; if the value is `nil', the header name will
- be removed. You can also say (eval (foo bar)), then the function
- foo will be evaluated with argument bar and the result will be
- thrown away.
-
-5.4. Can I set things like From, Signature etc group based on the group
- I post too?
-
- That's the strength of posting styles. Before, we used ".*" to set
- the default for all groups. You can use a regexp like "^gmane" and
- the following settings are only applied to postings you send to the
- gmane hierarchy, use ".*binaries" instead and they will be applied
- to postings send to groups containing the string binaries in their
- name etc.
-
- You can instead of specifying a regexp specify a function which is
- evaluated, only if it returns true, the corresponding settings take
- effect. Two interesting candidates for this are message-news-p
- which returns t if the current Group is a newsgroup and the
- corresponding message-mail-p.
-
- Note that all forms that match are applied, that means in the
- example below, when I post to gmane.mail.spam.spamassassin.general,
- the settings under ".*" are applied and the settings under
- message-news-p and those under "^gmane" and those under "^gmane\
- \.mail\\.spam\\.spamassassin\\.general$". Because of this put
- general settings at the top and specific ones at the bottom.
-
- (setq gnus-posting-styles
- '((".*" ;;default
- (name "Frank Schmitt")
- (organization "Hamme net, kren mer och nimmi")
- (signature-file "~/.signature") )
- ((message-news-p) ;;Usenet news?
- (address "mySpamTrap@Frank-Schmitt.bla")
- ("Reply-To" "hereRealRepliesOnlyPlease@Frank-Schmitt.bla") )
- ((message-mail-p) ;;mail?
- (address "usedForMails@Frank-Schmitt.bla") )
- ("^gmane" ;;this is mail, too in fact
- (address "usedForMails@Frank-Schmitt.net")
- ("Reply-To" nil) )
- ("^gmane.mail.spam.spamassassin.general$"
- (eval (setq mail-envelope-from "Azzrael@rz-online.de"))
- (address "Azzrael@rz-online.de")) ))
-
-
-5.5. Is there a spell-checker? Perhaps even on-the-fly spell-checking?
-
- You can use ispell.el to spell-check stuff in Emacs. So the first
- thing to do is to make sure that you've got either ispell [http://
- fmg-www.cs.ucla.edu/fmg-members/geoff/ispell.html] or aspell [http:
- //aspell.sourceforge.net/] installed and in your Path. Then you
- need ispell.el [http://www.kdstevens.com/~stevens/ispell-page.html]
- and for on-the-fly spell-checking flyspell.el [http://
- www-sop.inria.fr/mimosa/personnel/Manuel.Serrano/flyspell/
- flyspell.html]. Ispell.el is shipped with Gnus Emacs and available
- through the Emacs package system, flyspell.el is shipped with Emacs
- and part of XEmacs text-modes package which is available through
- the package system, so there should be no need to install them
- manually.
-
- Ispell.el assumes you use ispell, if you choose aspell say
-
- (setq ispell-program-name "aspell")
-
- in your Emacs configuration file.
-
- If you want your outgoing messages to be spell-checked, say
-
- (add-hook 'message-send-hook 'ispell-message)
-
- In your ~/.gnus, if you prefer on-the-fly spell-checking say
-
- (add-hook 'message-mode-hook (lambda () (flyspell-mode 1)))
-
-5.6. Can I set the dictionary based on the group I'm posting to?
-
- Yes, say something like
-
- (add-hook 'gnus-select-group-hook
- (lambda ()
- (cond
- ((string-match
- "^de\\." (gnus-group-real-name gnus-newsgroup-name))
- (ispell-change-dictionary "deutsch8"))
- (t
- (ispell-change-dictionary "english")))))
-
-
- in ~/.gnus. Change "^de\\." and "deutsch8" to something that suits
- your needs.
-
-5.7. Is there some kind of address-book, so I needn't remember all those
- email addresses?
-
- There's an very basic solution for this, mail aliases. You can
- store your mail addresses in a ~/.mailrc file using a simple alias
- syntax:
-
- alias al "Al <al@english-heritage.bla>"
-
-
- Then typing your alias (followed by a space or punctuation
- character) on a To: or Cc: line in the message buffer will cause
- gnus to insert the full address for you. See the node "Mail
- Aliases" in Message (not Gnus) manual for details.
-
- However, what you really want is the Insidious Big Brother Database
- bbdb. Get it through the XEmacs package system or from bbdb's
- homepage [http://bbdb.sourceforge.net/]. Now place the following in
- ~/.gnus, to activate bbdb for Gnus:
-
- (require 'bbdb)
- (bbdb-initialize 'gnus 'message)
-
-
- Now you probably want some general bbdb configuration, place them
- in ~/.emacs:
-
- (require 'bbdb)
- ;;If you don't live in Northern America, you should disable the
- ;;syntax check for telephone numbers by saying
- (setq bbdb-north-american-phone-numbers-p nil)
- ;;Tell bbdb about your email address:
- (setq bbdb-user-mail-names
- (regexp-opt '("Your.Email@here.bla"
- "Your.other@mail.there.bla")))
- ;;cycling while completing email addresses
- (setq bbdb-complete-name-allow-cycling t)
- ;;No popup-buffers
- (setq bbdb-use-pop-up nil)
-
-
- Now you should be ready to go. Say M-x bbdb RET RET to open a bbdb
- buffer showing all entries. Say c to create a new entry, b to
- search your BBDB and C-o to add a new field to an entry. If you
- want to add a sender to the BBDB you can also just hit `:' on the
- posting in the summary buffer and you are done. When you now
- compose a new mail, hit TAB to cycle through know recipients.
-
-5.8. Sometimes I see little images at the top of article buffer. What's
- that and how can I send one with my postings, too?
-
- Those images are called X-Faces. They are 48*48 pixel b/w pictures,
- encoded in a header line. If you want to include one in your posts,
- you've got to convert some image to a X-Face. So fire up some image
- manipulation program (say Gimp), open the image you want to
- include, cut out the relevant part, reduce color depth to 1 bit,
- resize to 48*48 and save as bitmap. Now you should get the compface
- package from this site [ftp://ftp.cs.indiana.edu:/pub/faces/]. and
- create the actual X-face by saying
-
- cat file.xbm | xbm2ikon |compface > file.face
- cat ./file.face | sed 's/\\/\\\\/g' | sed 's/\"/\\\"/g' > ./file.face.quoted
-
-
- if you can't use compface, there's an online X-face converter at
- http://www.dairiki.org/xface/ [http://www.dairiki.org/xface/]. If
- you use MS Windows, you could also use the WinFace program from
- http://www.xs4all.nl/~walterln/winface/ [http://www.xs4all.nl/
- ~walterln/winface/]. Now you only have to tell Gnus to include the
- X-face in your postings by saying
-
- (setq message-default-headers
- (with-temp-buffer
- (insert "X-Face: ")
- (insert-file-contents "~/.xemacs/xface")
- (buffer-string)))
-
-
- in ~/.gnus.
-
-5.9. Sometimes I accidentally hit r instead of f in newsgroups. Can Gnus
- warn me, when I'm replying by mail in newsgroups?
-
- Put this in ~/.gnus:
-
- (defadvice gnus-summary-reply (around reply-in-news activate)
- (interactive)
- (when (or (not (gnus-news-group-p gnus-newsgroup-name))
- (y-or-n-p "Really reply? "))
- ad-do-it))
-
-
- In Oort you can use
-
- (setq gnus-confirm-mail-reply-to-news t)
-
-
- instead to achieve the same result.
-
-5.10. How to tell Gnus not to generate a sender header?
-
- Say
-
- (eval-after-load "message"
- '(add-to-list 'message-syntax-checks '(sender . disabled)))
-
-
- in ~/.gnus. (This is the default behaviour in Oort Gnus.)
-
-5.11. I want gnus to locally store copies of my send mail and news, how
- to do it?
-
- You must set the variable gnus-message-archive-group to do this.
- You can set it to a string giving the name of the group where the
- copies shall go or like in the example below use a function which
- is evaluated and which returns the group to use.
-
- (setq gnus-message-archive-group
- '((if (message-news-p)
- "nnml:Send-News"
- "nnml:Send-Mail")))
-
-
-5.12. People tell me my Message-IDs are not correct, why aren't they and
- how to fix it?
-
- The message-ID is an unique identifier for messages you send. To
- make it unique, Gnus need to know which machine name to put after
- the "@". If the name of the machine where Gnus is running isn't
- suitable (it probably isn't at most private machines) you can tell
- Gnus what to use by saying:
-
- (defun message-make-message-id()
- (concat "<"(message-unique-id)"@yourmachine.yourdomain.tld>"))
-
-
- in ~/.gnus. If you have no idea what to insert for
- "yourmachine.yourdomain.tld", you've got several choices. You can
- either ask your provider if he allows you to use something like
- yourUserName.userfqdn.provider.net, or you can use
- somethingUnique.yourdomain.tld if you own the domain
- yourdomain.tld, or you can register at a service which gives
- private users a FQDN for free, e.g. http://www.stura.tu-freiberg.de
- /~dlx/addfqdn.html [http://www.stura.tu-freiberg.de/~dlx/
- addfqdn.html]. (Sorry but this website is in German, if you know of
- an English one offering the same, drop me a note).
-
- Finally you can tell Gnus not to generate a Message-ID for News at
- all (and letting the server do the job) by saying
-
- (setq message-required-news-headers
- (remove' Message-ID message-required-news-headers))
-
-
- you can also tell Gnus not to generate Message-IDs for mail by
- saying
-
- (setq message-required-mail-headers
- (remove' Message-ID message-required-mail-headers))
-
-
- , however some mail servers don't generate proper Message-IDs, too,
- so test if your Mail Server behaves correctly by sending yourself a
- Mail and looking at the Message-ID.
-
-6. Old messages
-
-6.1. How to import my old mail into Gnus?
-
- The easiest way is to tell your old mail program to export the
- messages in mbox format. Most Unix mailers are able to do this, if
- you come from the MS Windows world, you may find tools at http://
- mbx2mbox.sourceforge.net/ [http://mbx2mbox.sourceforge.net/].
-
- Now you've got to import this mbox file into Gnus. To do this,
- create a nndoc group based on the mbox file by saying G f /path/
- file.mbox RET in Group buffer. You now have read-only access to
- your mail. If you want to import the messages to your normal Gnus
- mail groups hierarchy, enter the nndoc group you've just created by
- saying C-u RET (thus making sure all messages are retrieved), mark
- all messages by saying M P b and either copy them to the desired
- group by saying B c name.of.group RET or send them through
- nnmail-split-methods (respool them) by saying B r.
-
-6.2. How to archive interesting messages?
-
- If you stumble across an interesting message, say in gnu.emacs.gnus
- and want to archive it there are several solutions. The first and
- easiest is to save it to a file by saying O f. However, wouldn't it
- be much more convenient to have more direct access to the archived
- message from Gnus? If you say yes, put this snippet by Frank Haun
- <pille3003@fhaun.de> in ~/.gnus:
-
- (defun my-archive-article (&optional n)
- "Copies one or more article(s) to a corresponding `nnml:' group, e.g.
- `gnus.ding' goes to `nnml:1.gnus.ding'. And `nnml:List-gnus.ding' goes
- to `nnml:1.List-gnus-ding'.
-
- Use process marks or mark a region in the summary buffer to archive
- more then one article."
- (interactive "P")
- (let ((archive-name
- (format
- "nnml:1.%s"
- (if (featurep 'xemacs)
- (replace-in-string gnus-newsgroup-name "^.*:" "")
- (replace-regexp-in-string "^.*:" "" gnus-newsgroup-name)))))
- (gnus-summary-copy-article n archive-name)))
-
-
- You can now say M-x my-archive-article in summary buffer to archive
- the article under the cursor in a nnml group. (Change nnml to your
- preferred back end)
-
- Of course you can also make sure the cache is enabled by saying
-
- (setq gnus-use-cache t)
-
-
- then you only have to set either the tick or the dormant mark for
- articles you want to keep, setting the read mark will remove them
- from cache.
-
-6.3. How to search for a specific message?
-
- There are several ways for this, too. For a posting from a Usenet
- group the easiest solution is probably to ask groups.google.com
- [http://groups.google.com] (in Oort Gnus you can search
- groups.google.com with G W), if you found the posting there, tell
- Google to display the raw message, look for the message-id, and say
- M-^ the@message.id RET in a summary buffer.
-
- Another idea which works for both mail and news groups is to enter
- the group where the message you are searching is and use the
- standard Emacs search C-s, it's smart enough to look at articles in
- collapsed threads, too. If you want to search bodies, too try M-s
- instead. Further on there are the gnus-summary-limit-to-foo
- functions, which can help you, too.
-
- Of course you can also use grep to search through your local mail,
- but this is both slow for big archives and inconvenient since you
- are not displaying the found mail in Gnus. Here comes nnir into
- action. Nnir is a front end to search engines like swish-e or
- swish++ and others. You index your mail with one of those search
- engines and with the help of nnir you can search trough the indexed
- mail and generate a temporary group with all messages which met
- your search criteria. If this sound cool to you get nnir.el from
- ftp://ls6-ftp.cs.uni-dortmund.de/pub/src/emacs/ [ftp://
- ls6-ftp.cs.uni-dortmund.de/pub/src/emacs/] or ftp://
- ftp.is.informatik.uni-duisburg.de/pub/src/emacs/ [ftp://
- ftp.is.informatik.uni-duisburg.de/pub/src/emacs/]. Instructions on
- how to use it are at the top of the file.
-
-6.4. How to get rid of old unwanted mail?
-
- You can of course just mark the mail you don't need anymore by
- saying # with point over the mail and then say B DEL to get rid of
- them forever. You could also instead of actually deleting them,
- send them to a junk-group by saying B m nnml:trash-bin which you
- clear from time to time, but both are not the intended way in Gnus.
-
- In Gnus, we let mail expire like news expires on a news server.
- That means you tell Gnus the message is expirable (you tell Gnus "I
- don't need this mail anymore") by saying E with point over the mail
- in summary buffer. Now when you leave the group, Gnus looks at all
- messages which you marked as expirable before and if they are old
- enough (default is older than a week) they are deleted.
-
-6.5. I want that all read messages are expired (at least in some
- groups). How to do it?
-
- If you want all read messages to be expired (e.g. in mailing lists
- where there's an online archive), you've got two choices:
- auto-expire and total-expire. Auto-expire means, that every article
- which has no marks set and is selected for reading is marked as
- expirable, Gnus hits E for you every time you read a message.
- Total-expire follows a slightly different approach, here all
- article where the read mark is set are expirable.
-
- To activate auto-expire, include auto-expire in the Group
- parameters for the group. (Hit G c in summary buffer with point
- over the group to change group parameters). For total-expire add
- total-expire to the group-parameters.
-
- Which method you choose is merely a matter of taste: Auto-expire is
- faster, but it doesn't play together with Adaptive Scoring, so if
- you want to use this feature, you should use total-expire.
-
- If you want a message to be excluded from expiration in a group
- where total or auto expire is active, set either tick (hit u) or
- dormant mark (hit u), when you use auto-expire, you can also set
- the read mark (hit d).
-
-6.6. I don't want expiration to delete my mails but to move them to
- another group.
-
- Say something like this in ~/.gnus:
-
- (setq nnmail-expiry-target "nnml:expired")
-
-
- (If you want to change the value of nnmail-expiry-target on a per
- group basis see the question "How can I disable threading in some
- (e.g. mail-) groups, or set other variables specific for some
- groups?")
-
-7. Getting help
-
-7.1. How to find information and help inside Emacs?
-
- The first stop should be the Gnus manual (Say C-h i d m Gnus RET to
- start the Gnus manual, then walk through the menus or do a
- full-text search with s). Then there are the general Emacs help
- commands starting with C-h, type C-h ? ? to get a list of all
- available help commands and their meaning. Finally M-x
- apropos-command lets you search through all available functions and
- M-x apropos searches the bound variables.
-
-7.2. I can't find anything in the Gnus manual about X (e.g. attachments,
- PGP, MIME...), is it not documented?
-
- There's not only the Gnus manual but also the manuals for message,
- emacs-mime, sieve and (only in Oort Gnus) pgg. Those packages are
- distributed with Gnus and used by Gnus but aren't really part of
- core Gnus, so they are documented in different info files, you
- should have a look in those manuals, too.
-
-7.3. Which websites should I know?
-
- The two most important ones are the official Gnus website [http://
- www.gnus.org]. and it's sister site my.gnus.org (MGO) [http://
- my.gnus.org], hosting an archive of lisp snippets, howtos, a (not
- really finished) tutorial and this FAQ.
-
- Tell me about other sites which are interesting.
-
-7.4. Which mailing lists and newsgroups are there?
-
- There's the newsgroup gnu.emacs.gnus (pull it from e.g.
- news.gnus.org) which deals with general questions and the ding
- mailing list (ding@gnus.org) dealing with development of Gnus. You
- can read the ding list via NNTP, too under the name gnus.ding from
- news.gnus.org.
-
- If you want to stay in the big8, news.software.newssreaders is also
- read by some Gnus users (but chances for qualified help are much
- better in the above groups) and if you speak German, there's
- de.comm.software.gnus.
-
-7.5. Where to report bugs?
-
- Say M-x gnus-bug, this will start a message to the gnus bug mailing
- list [mailto:bugs@gnus.org] including information about your
- environment which make it easier to help you.
-
-7.6. I need real-time help, where to find it?
-
- Point your IRC client to irc.my.gnus.org channel #mygnus. Don't be
- afraid if people there speak German, they are willing and capable
- of switching to English when people from outside Germany enter.
-
-8. Tuning Gnus
-
-8.1. Starting Gnus is really slow, how to speed it up?
-
- The reason for this could be the way Gnus reads it's active file,
- see the node "The Active File" in the Gnus manual for things you
- might try to speed the process up. An other idea would be to byte
- compile your ~/.gnus (say M-x byte-compile-file RET ~/.gnus RET to
- do it). Finally, if you have require statements in your .gnus, you
- could replace them with eval-after-load, which loads the stuff not
- at startup time, but when it's needed. Say you've got this in your
- ~/.gnus:
-
- (require 'message)
- (add-to-list 'message-syntax-checks '(sender . disabled))
-
-
- then as soon as you start Gnus, message.el is loaded. If you
- replace it with
-
- (eval-after-load "message"
- '(add-to-list 'message-syntax-checks '(sender . disabled)))
-
-
- it's loaded when it's needed.
-
-8.2. How to speed up the process of entering a group?
-
- A speed killer is setting the variable gnus-fetch-old-headers to
- anything different from nil, so don't do this if speed is an issue.
- To speed up building of summary say
-
- (gnus-compile)
-
-
- at the bottom of your ~/.gnus, this will make gnus byte-compile
- things like gnus-summary-line-format. then you could increase the
- value of gc-cons-threshold by saying something like
-
- (setq gc-cons-threshold 3500000)
-
-
- in ~/.emacs. If you don't care about width of CJK characters or use
- Oort Gnus together with a recent GNU Emacs, you should say
-
- (setq gnus-use-correct-string-widths nil)
-
-
- in ~/.gnus (thanks to Jesper harder for the last two suggestions).
- Finally if this also doesn't help, you might want to jump in the
- cold water and try Oort Gnus, there some work has been done to
- speed up summary generation. Read and remember the warnings about
- Oort at the top of this FAQ.
-
-8.3. Sending mail becomes slower and slower, what's up?
-
- The reason could be that you told Gnus to archive the messages you
- wrote by setting gnus-message-archive-group. Try to use a nnml
- group instead of an archive group, this should bring you back to
- normal speed.
-
-Glossary
-
-~/.gnus
-
- When the term ~/.gnus is used it just means your Gnus
- configuration file. You might as well call it ~/.gnus.el or
- specify another name.
-
-Back End
-
- In Gnus terminology a back end is a virtual server, a layer
- between core Gnus and the real NNTP-, POP3-, IMAP- or
- whatever-server which offers Gnus a standardized interface to
- functions like "get message", "get Headers" etc.
-
-Emacs
-
- When the term Emacs is used in this FAQ, it means either GNU
- Emacs or XEmacs.
-
-Message
-
- In this FAQ message means a either a mail or a posting to a
- Usenet Newsgroup or to some other fancy back end, no matter of
- which kind it is.
-
-MUA
-
- MUA is an acronym for Mail User Agent, it's the program you use
- to read and write e-mails.
-
-NUA
-
- NUA is an acronym for News User Agent, it's the program you use
- to read and write Usenet news.
-
+Or simply use RET or the middle mouse button, if the above is displayed
+as a clickable button.
projects / gnus / blobdiff