prefix = @prefix@
+# Avoid "WARNING: Makefile.in seems to ignore the --datarootdir setting":
+datarootdir = @datarootdir@
datadir = @datadir@
lispdir = @lispdir@
srcdir = @srcdir@
@SET_MAKE@
EMACS = @EMACS@
-XEMACS = xemacs21
+XEMACS = @EMACS@
+
+GZIP_PROG = @GZIP_PROG@
+
+SED_I = sed -i -e
+
+# # # # # # # # # # Release variables (for maintainer only):
+#
+# Files removed from `cvs export' output before creating the tar-ball:
+CVS_IGNORE_FILES = .cvsignore contrib/.cvsignore etc/.cvsignore \
+ lisp/.cvsignore texi/.cvsignore texi/ps/.cvsignore .arch-inventory
+# Name and mail address in ChangeLog format for the release commit:
+COMMITTER = Lars Magne Ingebrigtsen <lars@ingebrigtsen.no>
+# CODENAME for development releases (CODENAME must have a trailing space,
+# (e.g. "Oort ")
+CODENAME =
+# Codename initial (lower case), e.g. 'n' for "No Gnus".
+CIN =
+# Files with hard-coded versions numbers:
+RELEASE_COMMIT_FILES = ChangeLog \
+ etc/ChangeLog lisp/ChangeLog texi/ChangeLog \
+ README lisp/gnus.el \
+ texi/gnus.texi texi/message.texi texi/gnus-faq.texi
+# Pattern matching previous version numbers:
+OLD_PATTERN = \(5\.[0-9][0-9]\.[0-9]*\|5\.[0-9][0-9]\|0\.[1-9][0-9]*\)
+# Codename pattern
+CODENAME_PATTERN = [A-Z]*[a-z]* *
+# CVS tag of the previous version:
+OLD_TAG = v5-10-6
+# CVS tag of the current release:
+TAG = v5-10
+#
+COMMIT_STRING = $(CODENAME)Gnus v$(VERSION) is released.
+# # # # # # # # # # End of release variables
all: lick info
+fail-on-warning: lick-fail-on-warning info
+
lick:
cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" all
+lick-fail-on-warning:
+ cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" fail-on-warning
+
install:
cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" install
cd texi && $(MAKE) EMACS="$(EMACS)" install
+ cd etc && $(MAKE) EMACS="$(EMACS)" install
+
+list-installed-shadows:
+ cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" list-installed-shadows
+
+remove-installed-shadows:
+ cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" remove-installed-shadows
+
+uninstall:
+ cd lisp && $(MAKE) lispdir="$(lispdir)" uninstall
+ cd texi && $(MAKE) uninstall
+ cd etc && $(MAKE) uninstall
+
+GNUS-NEWS: texi/gnus-news.texi
+ cd texi && $(MAKE) GNUS-NEWS
+
+check:
+ cd lisp && $(MAKE) EMACS="$(EMACS)" lispdir="$(lispdir)" check
# Rule for Lars and nobody else.
some:
cd texi && $(MAKE) EMACS="$(EMACS)" all
clean:
- rm -f */*.orig */*.rej *.orig *.rej
-
-xsome:
- cd lisp && $(MAKE) EMACS="$(XEMACS)" some
+ for i in lisp texi etc texi/ps; do (cd $$i; $(MAKE) clean); done
+ rm -f *.orig *.rej *~
elclean:
- rm lisp/*.elc
+ cd lisp && rm -f *.elc auto-autoloads.el custom-load.el gnus-load.el
x:
- make EMACS=xemacs21
+ $(MAKE) EMACS=$(XEMACS)
-distclean:
- make clean
- rm -rf *~
- for i in lisp texi; do (cd $$i; make distclean); done
- rm -f config.log config.status config.cache Makefile
+xsome:
+ $(MAKE) EMACS="$(XEMACS)" some
-osome:
- make EMACS=xemacs21 some
+distclean: clean
+ for i in lisp texi etc texi/ps; do (cd $$i; $(MAKE) distclean); done
+ rm -f config.log config.status config.cache Makefile
config.status: $(srcdir)/configure
$(SHELL) ./config.status --recheck
Makefile: $(srcdir)/Makefile.in config.status
CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+# # # # # # # # # # Release targets (for maintainer only):
+
+release-check-settings:
+ @echo
+ @echo "COMMITTER = '$(COMMITTER)'"
+ @echo " (example: 'Foo Bar <foo.bar@somewhere.invalid>')"
+ @echo "VERSION = '$(VERSION)' (example: '5.10.6')"
+ @echo "TAG = '$(TAG)' (example: 'v5-10-6')"
+ @echo "OLD_TAG = '$(OLD_TAG)' (example: 'v5-10-5')"
+ @echo
+ @echo "# Only for development versions:"
+ @echo "CODENAME = '$(CODENAME)' (example: 'No ')"
+ @echo "CIN = '$(CIN)' (example: 'n', codename initial)"
+ @echo
+ @if [ x"$(VERSION)" = x ]; then echo "error: No VERSION given."; exit 1; else :; fi
+ @if [ x"$(TAG)" = x ]; then echo "error: No TAG given."; exit 1; else :; fi
+ @echo
+ @echo Settings checked successfully.
+ @echo
+ @echo You may now make...
+ @echo release-bump-version
+ @echo release-add-changelog
+ @echo release-commit
+ @echo release-files or release-files-signed
+
+release-help:
+ @echo "Available targets for releases:"
+ @echo
+ @echo "[0] release-help"
+ @echo " Display this help message."
+ @echo
+ @echo "[1] release-check-settings"
+ @echo " Check it all required variables are specified on the command line."
+ @echo " Run this target to display the variable names and current values."
+ @echo
+ @echo "[2] release-bump-version"
+ @echo " Bump the version to VERSION"
+ @echo
+ @echo "[3] release-add-changelog"
+ @echo " Add COMMITTER and COMMIT_STRING to the ChangeLogs."
+ @echo
+ @echo "[4] release-commit"
+ @echo " Commit the ChangeLogs and tag repository with TAG."
+ @echo
+ @echo "[5] release-files or release-files-signed"
+ @echo " Create the release tar-ball and diff file."
+ @echo " release-files-signed creates detached GPG signature files as well."
+ @echo
+ @echo "For a release, steps [1]-[5] need to be done. Immediately after"
+ @echo "the release, we bump the version again by performing steps [1]-[4]"
+ @echo "with the next VERSION and TAG."
+ @echo
+
+bump-version:
+ $(MAKE) COMMIT_STRING='Bump version to $(VERSION).' release-bump-version
+
+bump-version-commit:
+ $(MAKE) COMMIT_STRING='Bump version to $(VERSION).' release-commit
+
+# Needs GNU grep and a recent GNU sed:
+release-bump-version: release-check-settings
+ $(SED_I) '/^(defconst gnus-version-number /s,"$(OLD_PATTERN)","$(VERSION)",' lisp/gnus.el
+ $(SED_I) '/^.newcommand{.gnusversionname}{$(CODENAME_PATTERN)Gnus v/s,$(OLD_PATTERN),$(VERSION),' texi/gnus.texi
+ $(SED_I) '/^This manual corresponds to $(CODENAME_PATTERN)Gnus v/s,$(OLD_PATTERN),$(VERSION),' texi/gnus.texi
+ $(SED_I) '/^@samp.{$(CODENAME_PATTERN)Gnus v.*@c Adjust Makefile/s,$(OLD_PATTERN),$(VERSION),' texi/gnus.texi
+ $(SED_I) '/^corresponding to this manual is $(CODENAME_PATTERN)Gnus v/s,$(OLD_PATTERN),$(VERSION),' texi/message.texi
+ $(SED_I) 's,/[a-z]*gnus-[0-9.]*/,/$(CIN)gnus-$(VERSION)/,' README
+ if [ "x$(CODENAME)" = "x" ]; then \
+ $(SED_I) '/The current release ($(OLD_PATTERN)) should/s,$(OLD_PATTERN),$(VERSION),' texi/gnus-faq.texi; \
+ else \
+ true; \
+ fi
+# Only for going from the development version to release...
+ if [ "x$(CODENAME)" = "x" -a "$(CODENAME_TO_STABLE)" = t ]; then \
+ $(SED_I) '/^(defconst gnus-version /s,"$(CODENAME_PATTERN)Gnus v,"Gnus v,' lisp/gnus.el; \
+ $(SED_I) '/^.newcommand{.gnusversionname}{$(CODENAME_PATTERN)Gnus v/s,$(CODENAME_PATTERN)Gnus v$(OLD_PATTERN),Gnus v$(VERSION),' texi/gnus.texi; \
+ $(SED_I) '/^This manual corresponds to $(CODENAME_PATTERN)Gnus v/s,$(CODENAME_PATTERN)Gnus v$(OLD_PATTERN),Gnus v$(VERSION),' texi/gnus.texi; \
+ $(SED_I) '/^corresponding to this manual is $(CODENAME_PATTERN)Gnus v/s,$(CODENAME_PATTERN)Gnus v$(OLD_PATTERN),Gnus v$(VERSION),' texi/message.texi; \
+ else \
+ true; \
+ fi
+ $(MAKE) release-diff-commit-files
+
+# Add ChangeLog entry...
+release-add-changelog: release-check-settings
+ @echo "Updating ChangeLog files..."
+ @if grep -q "$(CODENAME)Gnus v$(VERSION) is released" ChangeLog; then \
+ echo "ChangeLog is already updated"; \
+ else \
+ $(SED_I) "1s|^|`date -I` $(COMMITTER)\n\n\t* README: $(COMMIT_STRING)\n\n|" ChangeLog; \
+ fi
+ @if grep -q "$(CODENAME)Gnus v$(VERSION) is released" etc/ChangeLog; then \
+ echo "etc/ChangeLog is already updated"; \
+ else \
+ $(SED_I) "1s|^|`date -I` $(COMMITTER)\n\n\t* ChangeLog: $(COMMIT_STRING)\n\n|" etc/ChangeLog; \
+ fi
+ @if grep -q "$(CODENAME)Gnus v$(VERSION) is released" texi/ChangeLog; then \
+ echo "texi/ChangeLog is already updated"; \
+ else \
+ $(SED_I) "1s|^|`date -I` $(COMMITTER)\n\n\t* gnus.texi, gnus-faq.texi, message.texi: $(COMMIT_STRING)\n\n|" texi/ChangeLog; \
+ fi
+ @if grep -q "$(CODENAME)Gnus v$(VERSION) is released" lisp/ChangeLog; then \
+ echo "lisp/ChangeLog is already updated"; \
+ else \
+ $(SED_I) "1s|^|`date -I` $(COMMITTER)\n\n\t* gnus.el: $(COMMIT_STRING)\n\n|" lisp/ChangeLog; \
+ fi
+ $(MAKE) release-diff-commit-files
+
+release-diff-commit-files: release-check-settings
+ cvs diff -U0 $(RELEASE_COMMIT_FILES); sleep 2
+
+release-revert-files:
+ rm -i $(RELEASE_COMMIT_FILES)
+ cvs update $(RELEASE_COMMIT_FILES)
+
+release-commit: release-check-settings
+ @echo -e '\007'
+ @echo
+ @echo "Really do the release-commit for $(CODENAME)Gnus v$(VERSION)?"
+ @echo "Command line:"
+ @echo " " cvs commit -m "$(COMMIT_STRING)" $(RELEASE_COMMIT_FILES)
+ @echo
+ @echo "Hit RET to continue or Ctrl-C to abort."
+ @echo
+ @read dummy
+ cvs commit -m "$(COMMIT_STRING)" $(RELEASE_COMMIT_FILES)
+ @echo
+ @echo "Add tag $(TAG) to CVS?"
+ @echo "Command line:"
+ @echo " " cvs tag $(TAG)
+ @echo "Hit RET to continue or Ctrl-C to abort."
+ @echo
+ @read dummy
+ cvs tag $(TAG)
+
+release-files: release-make-tar-ball release-diff
+ @echo "Release files have been created:"
+ @ls -l $(CIN)gnus-$(VERSION).tar.gz
+ @ls -l $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff.gz
+
+release-files-signed: release-files release-sign-files
+
+# Sign prepared files:
+release-sign-files:
+ if [ "x$$GPG_AGENT_INFO" = "x" ]; then \
+ read -sp "Enter pass phrase: " phrase ; \
+ gpg_opt="--passphrase-fd 0"; \
+ else \
+ gpg_opt=""; phrase=""; \
+ fi; \
+ for i in $(CIN)gnus-$(VERSION).tar.gz \
+ $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff.gz; do \
+ rm -f $$i.sig; \
+ echo "$$phrase" | gpg --detach-sign $$gpg_opt $$i; \
+ done; true
+ @ls -l $(CIN)gnus-$(VERSION).tar.gz{.sig,}
+ @ls -l $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff.gz{.sig,}
+ @gpg --verify $(CIN)gnus-$(VERSION).tar.gz{.sig,}
+ @gpg --verify $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff.gz{.sig,}
+
+release-cvs-export $(CIN)gnus-$(VERSION): release-check-settings
+ rm -fr $(CIN)gnus-$(VERSION)
+ umask 0022; cvs export -d $(CIN)gnus-$(VERSION) -r $(TAG) gnus
+
+release-make-tar-ball: $(CIN)gnus-$(VERSION)
+ [ -d $(CIN)gnus-$(VERSION) ] && cd $(CIN)gnus-$(VERSION) && \
+ rm $(CVS_IGNORE_FILES) || true
+ tar zcvf $(CIN)gnus-$(VERSION).tar.gz $(CIN)gnus-$(VERSION)
+ ls -l $(CIN)gnus-$(VERSION).tar.gz
+
+# Make a diff between current and previous release. Example:
+# ftp://quimby.gnus.org/pub/gnus/ding-patches/gnus-5.10.5-5.10.6.diff.gz
+release-diff: release-check-settings
+ cvs diff -r $(OLD_TAG) -r $(TAG) | sed -e '/^\? /d' > temp.diff || true
+ mv temp.diff $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff
+ $(GZIP_PROG) -f $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff
+ ls -l $(CIN)gnus-`echo $(OLD_TAG)%$(TAG)|tr - .|tr -d v|tr % -`.diff.gz
+
+release-post-clean: release-check-settings
+ rm -fr $(CIN)gnus-$(TAG) temp.diff
+
+# # # # # # # # # # End of release targets
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / gnus / blobdiff