-% Reference Card for (ding) Gnus 0.98
-% by Vladimir Alexiev <vladimir@cs.ualberta.ca>, 26 July 1995.
-% To be processed with latex 2.09
-\documentstyle{article}
-\textwidth 7.5in \textheight 10in \topmargin -1.0in
-%\textwidth 7.27in \textheight 10.69in \topmargin -1.69in
-% use this alternative setting for A4 (or leave it alone if you don't mind
-% a bit of space at the top and bottom of the page).
+% -*- latex -*-
+% Reference Card for (ding) Gnus 5.8.x: to be processed with LaTeX2e
+\documentclass{article}
+\def\Guide{Card}\def\guide{card}
+\def\logoscale{0.25}
+\textwidth 7.26in \textheight 10in \topmargin -1.0in
+% the same settings work for A4, although there is a bit of space at the
+% top and bottom of the page.
\oddsidemargin -0.5in \evensidemargin -0.5in
-\begin{document}
-\twocolumn\scriptsize\pagestyle{empty}
-\raggedbottom\raggedright
-\newlength{\mywidth}
-\setlength{\mywidth}{0.5\textwidth}
-\addtolength{\mywidth}{-0.75in}
-\newenvironment{keys}
- {\nopagebreak[4]\begin{tabular}{@{}l@{\hspace{\tabcolsep}}p{\mywidth}@{}}}
- {\end{tabular}\\}
-\catcode`\^=12 % allow ^ to be typed literally
-\def\Bar{\rule[-0.3ex]{0.5pt}{2ex}\hspace{0.1em}} % the bar | symbol
-
-\begin{center}
-{\bf\LARGE (ding) Gnus Reference Card\\}
-{\normalsize for version 0.98}
-\end{center}
-
-Gnus is complex. Currently it has some 346 interactive (user-callable)
-functions. Of these 279 have keybindings in the two major modes (Group and
-Summary/Article). Of these functions, 96 have more than one binding; some
-have 3 or even 4 bindings. The total number of keybindings is 389. In order
-to save 40\% space, every function is listed only once, under the ``more
-logical'' binding. Alternative bindings are given in parentheses in the
-beginning of the description.
-
-Many Gnus commands are affected by the numeric prefix. Normally you enter a
-prefix by holding the Meta key and typing a number, but in most Gnus modes
-you don't need to use Meta since the digits are not self-inserting. The
-prefixed behavior of commands is given in [brackets]. Often the prefix is
-used to specify:
-
-\quad [distance] How many objects to move the point over.
-
-\quad [scope] How many objects to operate on (including the current one).
-
-\quad [p/p] The ``Process/Prefix Convention'': If a prefix is specified
-then it determines how many objects to operate on. Else if there are some
-objects marked with the process mark \#, these are operated on. Else only
-the current object is affected.
-
-\quad [level] A group subscribedness level. Only groups with a lower or
-equal level will be affected by the operation. If no prefix is given,
-`gnus-group-default-list-level' is used. If
-`gnus-group-use-permanent-levels', then a prefix to the `g' and `l'
-commands will also set the default level.
-
-\quad [score] An article score. If no prefix is given,
-`gnus-summary-default-score' is used.
-
-Some functions were not yet documented at the time of creating this
-reference card and are clearly indicated as such.
-
-\begin{keys}
-C-c C-i & Go to the Gnus info node.\\
-C-c C-b & Send a Gnus bug report.\\
-\end{keys}
-
-\section*{Group Mode}
-\begin{keys}
-RET & (=) Select this group. [Prefix: how many articles to fetch.
-Positive: newest articles, negative: oldest ones.]\\
-SPC & Select this group and display the first unread article. [Same
-prefix as above.]\\
-? & Give a very short help message.\\
-$<$ & Go to the beginning of the Group buffer.\\
-$>$ & Go to the end of the Group buffer.\\
-, & Jump to the unread group with the lowest level.\\
-. & Jump to the first group with unread articles.\\
-^ & Enter the Server buffer mode.\\
-a & Post an article to a group.\\
-b & Find bogus groups and delete them.\\
-c & Mark all unticked articles in this group as read (catchup). [p/p]\\
-g & Check the server for new articles. [level]\\
-j & Jump to a group.\\
-l & List groups with unread articles. [level]\\
-m & Mail a message to someone.\\
-n & Go to the next group with unread articles. [distance]\\
-p & (DEL) Go to the previous group with unread articles. [distance]\\
-q & Quit Gnus.\\
-r & Read the init file.\\
-s & Save the `.newsrc.eld' file (and `.newsrc' if
-`gnus-save-newsrc-file').\\
-z & Suspend (kill all buffers of) Gnus.\\
-B & Browse a foreign server.\\
-C & Mark all articles in this group as read (catchup). [p/p]\\
-F & Find new groups and process them.\\
-L & List all groups. [level]\\
-N & Go to the next group. [distance]\\
-P & Go to the previous group. [distance]\\
-Q & Quit Gnus without saving any startup files.\\
-R & Restart Gnus.\\
-V & Display the Gnus version number.\\
-Z & Clear the dribble buffer.\\
-C-c C-d & Show the description of this group. [Prefix: re-read it from the
-server.]\\
-C-c C-s & Sort the groups by name, number of unread articles, or level
-(depending on `gnus-group-sort-function').\\
-C-c C-x & Run all expirable articles in this group through the expiry
-process.\\
-C-c M-C-x & Run all articles in all groups through the expiry process.\\
-C-x C-t & Transpose two groups.\\
-M-d & Describe ALL groups. [Prefix: re-read the description from the
-server.]\\
-M-f & Fetch this group's FAQ (using ange-ftp).\\
-M-g & Check for new articles in this group. [p/p]\\
-M-n & Go to the previous unread group of the same or lower level. [distance]\\
-M-p & Go to the next unread group of the same or lower level. [distance]\\
-\end{keys}
-
-\subsection*{List Groups}
-\begin{keys}
-A a & (C-c C-a) List all groups whose names match a regexp (apropos).\\
-A d & List all groups whose names or descriptions match a regexp.\\
-A k & (C-c C-l) List all killed groups.\\
-A m & List groups that match a regexp and have unread articles. [level]\\
-A s & (l) List groups with unread articles. [level]\\
-A u & (L) List all groups. [If no prefix is given, level 7 is the
-default]\\
-A z & List all zombie groups.\\
-A M & List groups that match a regexp.\\
-\end{keys}
-
-\subsection*{Create/Edit Foreign Groups}
-The select methods are indicated in parentheses.\\*
-\begin{keys}
-G a & Make the Gnus list archive group. (nndir over ange-ftp)\\
-G d & Make a directory group (every file must be a posting and files
-must have numeric names). (nndir)\\
-G e & (M-e) Edit this group's select method.\\
-G f & Make a group based on a file. (nndoc)\\
-G h & Make the (ding) Gnus help (documentation) group. (nndoc)\\
-G k & Make a kiboze group. (nnkiboze)\\
-G m & Make a new group.\\
-G p & Edit this group's parameters.\\
-G v & Add this group to a virtual group. [p/p]\\
-G D & Enter a directory as a (temporary) group. (nneething without
-recording articles read.)\\
-G E & Edit this group's info (select method, articles read, etc).\\
-G V & Make a new empty virtual group. (nnvirtual)\\
-\end{keys}
-You can also create mail-groups and read your mail with Gnus (very useful
-if you are subscribed to any mailing lists), using one of the methods
-nnmbox, nnbabyl, nnml, nnmh, or nnfolder. Read about it in the online info
-(C-c C-i g Reading Mail RET).
-
-\subsubsection*{Soup Commands}
-\begin{keys}
-G s b & gnus-group-brew-soup: not documented.\\
-G s p & gnus-soup-pack-packet: not documented.\\
-G s r & nnsoup-pack-replies: not documented.\\
-G s s & gnus-soup-send-replies: not documented.\\
-G s w & gnus-soup-save-areas: not documented.\\
-\end{keys}
-
-\subsection*{Mark Groups}
-\begin{keys}
-M m & (\#) Set the process mark on this group. [scope]\\
-M u & (M-\#) Remove the process mark from this group. [scope]\\
-M w & Mark all groups in the current region.\\
-\end{keys}
-
-\subsection*{Unsubscribe, Kill and Yank Groups}
-\begin{keys}
-S k & (C-k) Kill this group.\\
-S l & Set the level of this group. [p/p]\\
-S s & (U) Prompt for a group and toggle its subscription (Unsubscribe).\\
-S t & (u) Toggle subscription to this group (unsubscribe). [p/p]\\
-S w & (C-w) Kill all groups in the region.\\
-S y & (C-y) Yank the last killed group.\\
-S z & Kill all zombie groups.\\
-\end{keys}
-
-\subsection*{Group Subscribedness Levels}
-\begin{tabular}{|r|c|l|}
-\hline
-1 & mail groups & \\
-2 & mail groups & \\
-3 & & subscribed \\
-4 & & \\
-5 & default list level & \\
-\hline
-6 & & \\
-7 & & unsubscribed \\
-\hline
-8 & & zombies \\
-\hline
-9 & & killed \\
-\hline
-\end{tabular}
-
-\pagebreak[4]
-
-\section*{Summary and Article Modes}
-\begin{keys}
-SPC & (A SPC, A n) Select an article, scroll it one page, move to the
-next one.\\
-DEL & (A DEL, A p, b) Scroll this article one page back. [distance]\\
-RET & Scroll this article one line forward. [distance]\\
-$<$ & (A $<$, A b) Scroll to the beginning of this article.\\
-$>$ & (A $>$, A e) Scroll to the end of this article.\\
-j & (G g) Ask for an article number and then go to that summary line.\\
-M-n & (G M-n) Go to the next summary line of an unread article.
-[distance]\\
-M-p & (G M-p) Go to the previous summary line of an unread article.
-[distance]\\
-\end{keys}
-
-\subsection*{Article Buffer Commands}
-\begin{keys}
-A c & (C-c C-r) Do a Caesar rotate (rot13) on the article buffer.\\
-A g & (g) (Re)fetch this article. [Prefix: just show the article.]\\
-A m & Toggle MIME processing.\\
-A r & (^, A^) Go to the parent of this article (the References: header).\\
-A s & (s) Perform an isearch in the article buffer.\\
-A t & (t) Toggle the displaying of all headers.\\
-A w & (w) Remove page breaks (`^L') from this article.\\
-\end{keys}
-\subsection*{Mail-Group Commands}
-These commands (except the first one) are only valid in a mail group.\\*
-\begin{keys}
-B DEL & Delete the mail article from disk (!). [p/p]\\
-B c & Copy this article from any group to a mail group. [p/p]\\
-B e & Expire all expirable articles in this group. [p/p]\\
-B i & Import a random file into this group.\\
-B m & Move the article from one mail group to another. [p/p]\\
-B q & Where will the article go during fancy splitting?\\
-B r & Respool this mail article. [p/p]\\
-B w & (e) Edit this article.\\
-B M-C-e & Expunge (delete from disk) all expirable articles in this group
-(!). [p/p]\\
-\end{keys}
+% README:
+% *** purpose
+% this was originally thought of as a reference card, but as it is now 5+
+% pages long, I doubt that it is more useful than the online-help. It helped
+% to get an overview for the Gnus-functionality.
+%
+% *** files
+% refcard.tex (this file), gnusref.tex ("include"-file) and gnuslogo.refcard
+% (Gnus logo).
+%
+% *** printing (about 5 pages now: write me if you can make it shorter..)
+% if you are using latex-mode, you do C-c C-f (process with latex),
+% C-c C-v (view using xdvi/dvi2tty) and C-c C-p (print)
+% the original author has set up the page dimensions cleverly so that this
+% should print on both letter and a4 (see note above)
+% $latex refcard.tex
+% this creates a file refcard.dvi which you can preview using
+% $xdvi refcard.dvi [C-c C-v]
+% and print using something like
+% $dvips refcard.dvi
+% which creates refcard.ps (print using 'lpr refcard.ps')
+%
+% *** customization:
+% the part following \begin{document} in this file consists of a macro for
+% each section and section-headers (\section*{..}). It should be easy to
+% reorder things and/or remove sections (put '%' at the beginning of the line).
+% (i.e. you might want to omit \notes in the printed version ?)
+% If you think that the order is not logical and you have ideas for
+% improvements, please send mail to the current maintainer.
+%
+% *** ChangeLog:
+% 2000-03-26 Felix Natter <fnatter@gmx.net>:
+% refcard updated for Gnus 5.8.x: please send corrections or suggestions
+% to the above email-address
+% changes since 2000-03-26:
+% o Create/Edit Foreign Groups: remove S b and S B (not available in 5.8.3)
+% o Send/Reply etc.: remove w and W (the only bindings are S w and S W)
+% Mon Apr 3 18:41:09 2000:
+% o added C-c C-n and C-c C-t (Article)
+% o C-c C-a as alias for M-m f (Article) + some other M-m *-bindings
+% o added section for ``jumping'' in article-mode
+% o now there's a difference between ``reading'' and ``composition''
+% (article-modes)
+% Apr 24th, 2000:
+% o added D s, D S and D t for nndraft
+% o group-mode: i.e. C-u RET does not actually fetch fewer articles; also ,=>;
+% Fri Jul 14 23:15:43 2000:
+% o added README-section
+% Thu Jul 27 20:51:01 2000:
+% o added Unplugged-commands
+%
+% *** TODO:
+% o (LaTeX) how can you get 'tabular' to wrap around pages ?
+% o some things might not be updated: scoring and server modes, maybe more
+% o Gnus Unplugged category-buffer commands need to be written
-\subsection*{Select Articles}
-These commands select the target article. They do not understand the prefix.\\*
-\begin{keys}
-G b & (,) Go to the best article (the one with the highest score).\\
-G f & (.) Go to the first unread article.\\
-G l & (l) Go to the last article read.\\
-G n & (n) Go to the next unread article.\\
-p & Go to the previous unread article.\\
-G p & Pop an article off the summary history and go to it.\\
-G N & (N) Go to the next article.\\
-G P & (P) Go to the previous article.\\
-G C-n & (M-C-n) Go to the next article with the same subject.\\
-G C-p & (M-C-p) Go to the previous article with the same subject.\\
-\end{keys}
-
-\subsection*{Help Commands}
-\begin{keys}
-H d & (C-c C-d) Describe this group. [Prefix: re-read the description
-from the server.]\\
-H f & Try to fetch the FAQ for this group using ange-ftp.\\
-H h & Give a very short help message.\\
-H i & (C-c C-i) Go to the Gnus info node.\\
-H v & Display the Gnus version number.\\
-\end{keys}
-
-\subsection*{Article Thread Commands}
-\begin{keys}
-T \# & Mark this thread with the process mark.\\
-T d & Move to the next article in this thread (down). [distance]\\
-T h & Hide this (sub)thread.\\
-T i & Increase the score of this thread.\\
-T k & (M-C-k) Mark the current (sub)thread as read. [Negative prefix:
-tick it, positive prefix: unmark it.]\\
-T l & (M-C-l) Lower the score of this thread.\\
-T n & Go to the next thread. [distance]\\
-T p & Go to the previous thread. [distance]\\
-T s & Expose the thread hidden under this article, if any.\\
-T u & Move to the previous article in this thread (up). [distance]\\
-T H & Hide all threads.\\
-T S & Expose all hidden threads.\\
-T T & (M-C-t) Toggle threading.\\
-\end{keys}
-
-\subsection*{Mark Articles}
-\begin{keys}
-d & (M d, M r) Mark this article as read and move to the next one.
-[scope]\\
-D & Mark this article as read and move to the previous one. [scope]\\
-u & (!, M !, M t) Mark this article as interesting (tick it) and move
-to the next one. [scope]\\
-U & Mark this article as interesting and move to the previous one.
-[scope]\\
-M-u & (M SPC, M c) Clear all marks from this article and move to the next
-one. [scope]\\
-M-U & Clear all marks from this article and move to the previous one.
-[scope]\\
-M ? & (?) Mark this article as dormant (only followups are
-interesting). [scope]\\
-M b & Set a bookmark in this article.\\
-M e & (E, M x) Mark this article as expirable. [scope]\\
-M k & (k) Kill all articles with the same subject then select the next
-one.\\
-M B & Remove the bookmark from this article.\\
-M C & Catchup the articles that are not marked as unread.\\
-M D & Show all dormant articles (normally they are hidden unless they
-have any followups).\\
-M H & Catchup (mark read) this group to point.\\
-M K & (C-k) Kill all articles with the same subject as this one.\\
-C-w & Mark all articles between point and mark as read.\\
-M S & (C-c M-C-s) Show all expunged articles.\\
-M C-c & Catchup all articles in this group.\\
-M M-r & (x) Expunge all read (deleted) articles from the summary buffer.\\
-M M-D & Hide all dormant articles.\\
-M M-C-r & Expunge all articles having a given mark.\\
-\end{keys}
-
-\subsubsection*{The Process Mark}
-{\samepage These commands set and remove the process mark \#. You only need
-to use it if the set of articles you want to operate on is
-non-contiguous. Else use a numeric prefix.} \\*
-\begin{keys}
-M p a & Mark all articles (in series order).\\
-M p p & (\#, M \#) Mark this article.\\
-M p r & Mark all articles in the region.\\
-M p s & Mark all articles in the current series.\\
-M p t & Mark all articles in this (sub)thread.\\
-M p u & (M-\#, M M-\#) Unmark this article.\\
-M p R & Mark all articles matching a regexp.\\
-M p S & Mark all series that already contain a marked article.\\
-M p U & Unmark all articles.\\
-\end{keys}
-
-\subsubsection*{Mark Based on Score}
-\begin{keys}
-M s c & Clear all marks from all high-scored articles. [score]\\
-M s k & Kill all low-scored articles. [score]\\
-M s m & Mark all high-scored articles with a given mark. [score]\\
-M s u & Mark all high-scored articles as interesting (tick them). [score]\\
-\end{keys}
-
-\subsection*{Output Articles}
-\begin{keys}
-O f & Save this article in plain file format. [p/p]\\
-O h & Save this article in mh folder format. [p/p]\\
-O m & Save this article in mail format. [p/p]\\
-O o & (o) Save this article using the default article saver. [p/p]\\
-O p & (\Bar) Pipe this article to a shell command. [p/p]\\
-O r & Save this article in rmail format. [p/p]\\
-O v & Save this article in vm format. [p/p]\\
-\end{keys}
-
-\subsection*{Wash the Article Buffer}
-\begin{keys}
-W a & Hide unwanted parts of the article. Calls W h, W C-c, W s.\\
-W b & Make external references in the article (Message-Ids and URLs) to
-buttons.\\
-W c & Hide article citation.\\
-W d & Remove extra CRs from the article.\\
-W f & Look for and display any X-Face headers.\\
-W h & Hide article headers.\\
-W o & Treat overstrike or underline in the article.\\
-W q & Treat quoted-printable in the article.\\
-W s & Hide article signature.\\
-W t & Convert the article timestamp to UTC (GMT).\\
-W w & Do word wrap in the article.\\
-W A & Highlight this article. Calls W H, W C, W S, W b.\\
-W C & Highlight article citation.\\
-W H & Highlight article headers.\\
-W S & Highlight article signature.\\
-W T & Convert the article timestamp to time lapsed since it was sent.\\
-W C-c & Hide article citation using a more intelligent algorithm.\\
-\end{keys}
-
-\subsection*{Followup, Reply, Forward, Cancel}
-\samepage{These commands put you in a separate post or mail buffer. After
-editing the article, send it by pressing C-c C-c. If you are in a
-foreign group and want to post the article using the foreign server, give
-a prefix to C-c C-c.} \\*
-\begin{keys}
-S b & Post a followup to this article and send a reply.\\
-S c & (C) Cancel this article (only works if it is your own).\\
-S f & (f) Post a followup to this article.\\
-S m & (m) Send a mail to some other person.\\
-S o m & (C-c C-f) Forward this article by mail to a person.\\
-S o p & Forward this article to a newsgroup.\\
-S p & (a) Post an article to this group.\\
-S r & (r) Mail a reply to the author of this article.\\
-S s & Supersede this article with a new one (only for own articles).\\
-S u & Uuencode a file and post it as a series.\\
-S B & Post a followup, send a reply, and include the original. [p/p]\\
-S F & (F) Post a followup and include the original. [p/p]\\
-S O m & Digest these series and forward by mail. [p/p]\\
-S O p & Digest these series and forward to a newsgroup.\\
-S R & (R) Mail a reply and include the original. [p/p]\\
-\end{keys}
-If you want to cancel or supersede an article you just posted (before it
-has appeared on the server), go to the *post-news* buffer, change
-`Message-ID' to `Cancel' or `Supersedes' and send it again with C-c C-c.
-
-\subsection*{Extract Series (Uudecode etc)}
-Gnus will recognize when the current article is part of a series (multipart
-posting whose parts are identified by numbers in their subjects, e.g.\
-1/10\dots10/10) and will process the series accordingly. You can mark more
-than one series. If the posting contains any archives, they are expanded
-and gathered in a new group.\\*
-\begin{keys}
-X b & Un-{\bf b}inhex these series. [p/p]\\
-X o & Simply {\bf o}output these series (no decoding). [p/p]\\
-X p & Unpack these {\bf p}ostscript series. [p/p]\\
-X s & Un-{\bf s}har these series. [p/p]\\
-X u & {\bf U}udecode these series. [p/p]\\
-\end{keys}
-
-Each one of these commands has four variants:\\*
-\begin{keys}
-X \bf z & Decode these series. [p/p]\\
-X v \bf z & Decode and view these series. [p/p]\\
-X \bf Z & Decode and save these series. [p/p]\\
-X v \bf Z & Decode, save and view these series. [p/p]\\
-\end{keys}
-where {\bf z} identifies the decoding method (b, o ,p ,s, u).
-
-An alternative binding for the most-often used of these commands is\\*
-\begin{keys}
-C-c C-v C-v & (X v u) Uudecode and view these series. [p/p]\\
-\end{keys}
-
-\subsection*{Exit the Current Group}
-\begin{keys}
-Z c & (c) Mark all unticked articles as read and exit.\\
-Z n & Mark all articles as read and go to the next group.\\
-Z C & Mark all articles as read and exit.\\
-Z E & (Q) Exit without updating the group information.\\
-Z G & (M-g) Check for new articles in this group.\\
-Z N & Exit and go to the next group.\\
-Z P & Exit and go to the previous group.\\
-Z R & Exit this group, and then enter it again. [Prefix: select all
-articles, read and unread.]\\
-Z Z & (q, Z Q) Exit this group.\\
-\end{keys}
-
-\subsection*{Various Group Commands}
-\begin{keys}
-V \& & (\&) Execute a command on all articles matching a regexp.
-[Prefix: move backwards.]\\
-V e & (=) Expand the Summary window. [Prefix: shrink it to display the
-Article window]\\
-V k & (M-k) Edit this group's kill file.\\
-V r & (M-^) Fetch the article with a given Message-ID.\\
-V u & Execute a command on all articles having the process mark.\\
-V D & Undigestify this article into a separate group.\\
-V K & (M-K) Edit the general kill file.\\
-V T & (C-t) Toggle truncation of summary lines.\\
-V C-r & Search through all previous articles for a regexp.\\
-V C-s & Search through all subsequent articles for a regexp.\\
-\end{keys}
-
-\subsubsection*{Sort the Summary Buffer}
-\begin{keys}
-V s a & (C-c C-s C-a) Sort the summary by author.\\
-V s d & (C-c C-s C-d) Sort the summary by date.\\
-V s i & (C-c C-s C-i) Sort the summary by article score.\\
-V s n & (C-c C-s C-n) Sort the summary by article number.\\
-V s s & (C-c C-s C-s) Sort the summary by subject.\\
-\end{keys}
-
-\subsubsection*{Article Score Commands}
-\newcommand{\B}[1]{{\bf#1})} % bold l)etter
-\begin{keys}
-V S a & Add a new score entry, specifying all elements.\\
-V S c & Specify a new score file as current.\\
-V S e & Edit the current score alist.\\
-V S f & Edit a score file and make it the current one.\\
-V S m & Mark all articles below a given score as read.\\
-V S s & Set the score of this article.\\
-V S t & Display all score rules applied to this article.\\
-V S x & Expunge all low-scored articles. [score]\\
-V S C & gnus-score-customize: not documented.\\
-V S S & Display the score of this article.\\
-\bf A p m l& Make a scoring entry based on this article.\\
-\end{keys}
-
-{\samepage
-The four letters stand for:\\*
-\quad \B{A}ction: I)ncrease, L)ower;\\*
-\quad \B{p}art: a)utor (from), s)ubject, x)refs (cross-posting), d)ate, l)ines,
-message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\*
-\quad \B{m}atch type:\\*
-\qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\*
-\qquad date: b)efore, a)t, n)this,\\*
-\qquad number: $<$, =, $>$;\\*
-\quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate.
-
-If you type the second letter in uppercase, the remaining two are assumed
-to be s)ubstring and t)emporary.
-If you type the third letter in uppercase, the last one is assumed to be
-t)emporary.
-
-\quad Extra keys for manual editing of a score file:\\*
-\begin{keys}
-C-c C-c & Finish editing the score file.\\
-C-c C-d & Insert the current date as number of days.\\
-\end{keys}
-}
+\begin{document}
+\newlength{\logowidth} \setlength{\logowidth}{6.861in}
+\newlength{\logoheight} \setlength{\logoheight}{7.013in}
-\section*{Article Mode}
-All keys for Summary mode also work in Article mode.
-The normal navigation keys work in Article mode.
-Some additional keys are:\\*
-\begin{keys}
-C-c ^ & Get the article with the Message-Id near point.\\
-C-c C-m & Send reply to the address near point and include the original.\\
-h & Go to the header line of the article in the summary buffer.\\
-\end{keys}
+\def\progver{5.8}\def\refver{5.8-4} % program and refcard versions
+\def\date{July 27th, 2000}
+\def\author{Vladimir Alexiev $<$vladimir@cs.ualberta.ca$>$}
+\raggedbottom\raggedright
+\twocolumn
+%\tiny
+\scriptsize
+\pagestyle{plain}
+
+% this contains a set of commands containing the actual sections
+% (and some explanations).
+\input{gnusref}
+
+\Title
+\par
+\Logo{refcard}
+\Notes
+%
+%
+\section*{Group-Mode}
+\GroupModeGeneral
+ \subsection*{Group Subscribedness-Levels}
+ \GroupLevels
+ \subsection*{List Groups}
+ \ListGroups
+ \subsection*{Create/Edit Foreign Groups}
+ \CreateEditGroups
+ \subsection*{Unsubscribe, Kill and Yank Groups}
+ \SubscribeKillYankGroups
+ \subsection*{Mark Groups}
+ \MarkGroups
+ \subsection*{Group-Unplugged}
+ \GroupUnplugged
+% topics in group-mode
+ \subsection*{Group Topics}
+ \GroupTopicsGeneral
+ \subsubsection*{Topic Sorting}
+ \TopicSorting
+%
+% summary-mode
+\section*{Summary-Mode}
+\SummaryModeGeneral
+ \subsection*{Select Articles}
+ \SelectArticles
+%
+ \subsection*{Threading}
+ \Threading
+%
+ \subsection*{Limiting}
+ \Limiting
+ \subsection*{Sort the Summary-Buffer}
+ \SortSummary
+ \subsection*{Score (Value) Commands}
+ \Scoring
+%
+ \subsection*{MIME operations from the Summary-Buffer}
+ \MIMESummary
+ \subsection*{Extract Series (Uudecode etc)}
+ \ExtractSeries
+ \subsection*{Output Articles}
+ \OutputArticles
+%
+ \subsection*{Post, Followup, Reply, Forward, Cancel}
+ \PostReplyetc
+ \subsection*{Message-Composition}
+ \MsgCompositionGeneral
+ \subsubsection*{Jumping in message-buffer}
+ \MsgCompositionMovementArticle
+ \subsubsection*{Attachments/MML}
+ \MsgCompositionMML
+% marking articles
+ \subsection*{Mark Articles}
+ \MarkArticlesGeneral
+ \subsubsection*{Mark Based on Score}
+ \MarkByScore
+ \subsubsection*{The Process Mark}
+ \ProcessMark
+ \subsubsection*{Mark Indication-Characters}
+ \MarkCharacters
+%
+ \subsection*{Summary-Unplugged}
+ \SummaryUnplugged
+ \subsection*{Mail-Group Commands}
+ \MailGroups
+ \subsection*{Draft-Group Commands}
+ \DraftGroup
+% exiting
+ \subsection*{Exit the Summary-Buffer}
+ \ExitSummary
+%
+%
+\section*{Article Mode (reading)}
+\ArticleModeGeneral
+ \subsection*{Wash the Article-Buffer}
+ \WashArticle
+ \subsection*{Hide/Highlight Parts of the Article}
+ \HideHighlightArticle
+ \subsection*{MIME operations from the Article-Buffer (reading)}
+ \MIMEArticleMode
+%
+%
\section*{Server Mode}
-To enter this mode, press `^' while in Group mode.\\*
-\begin{keys}
-SPC & Browse this server.\\
-q & Return to the group buffer.\\
-l & List all servers.\\
-k & Kill this server. [scope]\\
-y & Yank the previously killed server.\\
-c & Copy this server.\\
-a & Add a new server.\\
-e & Edit a server.\\
-\end{keys}
-
+\ServerMode
+ \subsection*{Unplugged-Server}
+ \ServerUnplugged
+%
+%
\section*{Browse Server Mode}
-To enter this mode, press `B' while in Group mode.\\*
-\begin{keys}
-RET & Enter the current group.\\
-SPC & Enter the current group and display the first article.\\
-? & Give a very short help message.\\
-l & Exit browse mode.\\
-n & Go to the next group. [distance]\\
-p & Go to the previous group. [distance]\\
-q & Exit browse mode.\\
-u & Subscribe to the current group. [scope]\\
-\end{keys}
+\BrowseServer
-\begin{center}\samepage
-Copyright \copyright\ 1987 Free Software Foundation, Inc.\\*
-Copyright \copyright\ 1995 Vladimir Alexiev $<$vladimir@cs.ualberta.ca$>$.\\*
-Created from the Gnus manual Copyright \copyright\ 1994 Lars Magne
-Ingebrigtsen.\\*
-and the Emacs Help Bindings feature (C-h b).\\*
-\end{center}
+%\pagebreak
+\vspace*{\fill}
+\Copyright
-Permission is granted to make and distribute copies of this reference card
-provided the copyright notice and this permission are preserved on all
-copies.
-Please send corrections, additions and suggestions to the above email
-address. \hfill 26 July 1995
\end{document}