\input texinfo @c -*-texinfo-*-
@setfilename message
-@settitle Pterodactyl Message 0.77 Manual
+@settitle Message (Oort) Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
-@c @direntry
-@c * Message: (message). Mail and news composition mode that goes with Gnus.
-@c @end direntry
+@dircategory Emacs
+@direntry
+* Message: (message). Mail and news composition mode that goes with Gnus.
+@end direntry
@iftex
@finalout
@end iftex
@setchapternewpage odd
-@ifinfo
+@ifnottex
This file documents Message, the Emacs message composition mode.
-Copyright (C) 1996,97,98,99 Free Software Foundation, Inc.
+Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end ifnottex
@tex
@titlepage
-@title Pterodactyl Message 0.77 Manual
+@title Message (Oort) Manual
@author by Lars Magne Ingebrigtsen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1996,97,98,99 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-
+Copyright @copyright{} 1996, 1997, 1998, 1999, 2000
+ Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being none, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
@page
* Key Index:: List of Message mode keys.
@end menu
-This manual corresponds to Pterodactyl Message 0.77. Message is
-distributed with the Gnus distribution bearing the same version number
-as this manual.
+This manual corresponds to Oort Message. Message is distributed with
+the Gnus distribution bearing the same version number as this manual.
@node Interface
(setq message-reply-to-function
(lambda ()
(cond ((equal (mail-fetch-field "from") "somebody")
- (mail-fetch-field "sender"))
+ (list (cons 'To (mail-fetch-field "sender"))))
(t
nil))))
@end lisp
@code{message-wide-reply-to-function}. It is used in the same way as
@code{message-reply-to-function} (@pxref{Reply}).
-@findex rmail-dont-reply-to-names
-Addresses that match the @code{rmail-dont-reply-to-names} regular
+@findex message-dont-reply-to-names
+Addresses that match the @code{message-dont-reply-to-names} regular
expression will be removed from the @code{Cc} header.
news.
@table @code
-@item message-forward-start-separator
-@vindex message-forward-start-separator
-Delimiter inserted before forwarded messages. The default is@*
-@samp{------- Start of forwarded message -------\n}.
-
-@vindex message-forward-end-separator
-@item message-forward-end-separator
-@vindex message-forward-end-separator
-Delimiter inserted after forwarded messages. The default is@*
-@samp{------- End of forwarded message -------\n}.
-
-@item message-signature-before-forwarded-message
-@vindex message-signature-before-forwarded-message
-If this variable is @code{t}, which it is by default, your personal
-signature will be inserted before the forwarded message. If not, the
-forwarded message will be inserted first in the new mail.
-
-@item message-included-forward-headers
-@vindex message-included-forward-headers
-Regexp matching header lines to be included in forwarded messages.
+@item message-forward-ignored-headers
+@vindex message-forward-ignored-headers
+All headers that match this regexp will be deleted when forwarding a message.
@item message-make-forward-subject-function
@vindex message-make-forward-subject-function
@samp{(fwd)}) removed before the new subject is
constructed. The default value is @code{nil}.
+@item message-forward-as-mime
+@vindex message-forward-as-mime
+If this variable is @code{t} (the default), forwarded messages are
+included as inline MIME RFC822 parts. If it's @code{nil}, forwarded
+messages will just be copied inline to the new message, like previous,
+non MIME-savvy versions of gnus would do.
@end table
@chapter Commands
@menu
+* Buffer Entry:: Commands after entering a Message buffer.
* Header Commands:: Commands for moving to headers.
* Movement:: Moving around in message buffers.
* Insertion:: Inserting things into message buffers.
* MIME:: @sc{mime} considerations.
+* Security:: Signing and encrypting messages.
* Various Commands:: Various things.
* Sending:: Actually sending the message.
* Mail Aliases:: How to use mail aliases.
+* Spelling:: Having Emacs check your spelling.
@end menu
+@node Buffer Entry
+@section Buffer Entry
+@cindex undo
+@kindex C-_
+
+You most often end up in a Message buffer when responding to some other
+message of some sort. Message does lots of handling of quoted text, and
+may remove signatures, reformat the text, or the like---depending on
+which used settings you're using. Message usually gets things right,
+but sometimes it stumbles. To help the user unwind these stumblings,
+Message sets the undo boundary before each major automatic action it
+takes. If you press the undo key (usually located at @kbd{C-_}) a few
+times, you will get back the un-edited message you're responding to.
+
+
@node Header Commands
@section Header Commands
Yank the message that's being replied to into the message buffer
(@code{message-yank-original}).
+@item C-c M-C-y
+@kindex C-c M-C-y
+@findex message-yank-buffer
+Prompt for a buffer name and yank the contents of that buffer into the
+message buffer (@code{message-yank-buffer}).
+
@item C-c C-q
@kindex C-c C-q
@findex message-fill-yanked-message
messages. The default is @samp{.}, which means that all headers will be
removed.
+@item message-cite-prefix-regexp
+@vindex message-cite-prefix-regexp
+Regexp matching the longest possible citation prefix on a line.
+
@item message-citation-line-function
@vindex message-citation-line-function
Function called to insert the citation line. The default is
language (@pxref{Composing, , Composing, emacs-mime, The Emacs MIME
Manual}).
+@node Security
+@section Security
+@cindex Security
+@cindex S/MIME
+@cindex PGP/MIME
+@cindex sign
+@cindex encrypt
+
+Using the MML language, Message is able to create digitally signed and
+digitally encrypted messages. Message (or rather MML) currently support
+PGP/MIME and S/MIME. Instructing MML to perform security operations on
+a MIME part is done using the @code{C-c C-m s} key map for signing and the
+@code{C-c C-m c} key map for encryption, as follows.
+
+@table @kbd
+
+@item C-c C-m s s
+@kindex C-c C-m s s
+@findex mml-secure-sign-smime
+
+Digitally sign current MIME part using S/MIME.
+
+@item C-c C-m s p
+@kindex C-c C-m s p
+@findex mml-secure-sign-pgp
+
+Digitally sign current MIME part using PGP/MIME.
+
+@item C-c C-m c s
+@kindex C-c C-m c s
+@findex mml-secure-encrypt-smime
+
+Digitally encrypt current MIME part using S/MIME.
+
+@item C-c C-m c p
+@kindex C-c C-m c p
+@findex mml-secure-encrypt-pgpmime
+
+Digitally encrypt current MIME part using PGP/MIME.
+
+@end table
+
+These commands do not immediately sign or encrypt the message, they
+merely insert proper MML tags to instruct the MML engine to perform that
+operation when the message is actually sent. They may perform other
+operations too, such as locating and retrieving a S/MIME certificate of
+the person you wish to send encrypted mail to.
+
+Since signing and especially encryption often is used when sensitive
+information is sent, you may want to have some way to ensure that your
+mail is actually signed or encrypted. After invoking the above
+sign/encrypt commands, it is possible to preview the raw article by
+using @code{C-u C-m P} (@code{mml-preview}). Then you can verify that
+your long rant about what your ex-significant other or whomever actually
+did with that funny looking person at that strange party the other
+night, actually will be sent encrypted.
+
+@emph{Note!} Neither PGP/MIME nor S/MIME encrypt/signs RFC822 headers.
+They only operate on the MIME object. Keep this in mind before sending
+mail with a sensitive Subject line.
+
+Actually using the security commands above is not very difficult. At
+least not compared with making sure all involved programs talk with each
+other properly. Thus, we now describe what external libraries or
+programs are required to make things work, and some small general hints.
+
+@subsection Using S/MIME
+
+@emph{Note!} This section assume you have a basic familiarity with
+modern cryptography, S/MIME, various PKCS standards, OpenSSL and so on.
+
+The S/MIME support in Message (and MML) require OpenSSL. OpenSSL
+perform the actual S/MIME sign/encrypt operations. OpenSSL can be found
+at @code{http://www.openssl.org/}. OpenSSL 0.9.6 and later should work.
+Version 0.9.5a cannot extract mail addresses from certificates, and it
+insert a spurious CR character into MIME separators so you may wish to
+avoid it if you would like to avoid being regarded as someone who send
+strange mail. (Although by sending S/MIME messages you've probably
+already lost that contest.)
+
+To be able to send encrypted mail, a personal certificate is not
+required. Message (MML) need a certificate for the person to whom you
+wish to communicate with though. You're asked for this when you type
+@code{C-c C-m c s}. Currently there are two ways to retrieve this
+certificate, from a local file or from DNS. If you chose a local file,
+it need to contain a X.509 certificate in PEM format. If you chose DNS,
+you're asked for the domain name where the certificate is stored, the
+default is a good guess. To my belief, Message (MML) is the first mail
+agent in the world to support retrieving S/MIME certificates from DNS,
+so you're not likely to find very many certificates out there. At least
+there should be one, stored at the domain @code{simon.josefsson.org}.
+LDAP is a more popular method of distributing certificates, support for
+it is planned. (Meanwhile, you can use @code{ldapsearch} from the
+command line to retrieve a certificate into a file and use it.)
+
+As for signing messages, OpenSSL can't perform signing operations
+without some kind of configuration. Especially, you need to tell it
+where your private key and your certificate is stored. MML uses an
+Emacs interface to OpenSSL, aptly named @code{smime.el}, and it contain
+a @code{custom} group used for this configuration. So, try @code{M-x
+customize-group RET smime RET} and look around.
+
+Currently there is no support for talking to a CA (or RA) to create your
+own certificate. None is planned either. You need to do this manually
+with OpenSSL or using some other program. I used Netscape and got a
+free S/MIME certificate from one of the big CA's on the net. Netscape
+is able to export your private key and certificate in PKCS #12 format.
+Use OpenSSL to convert this into a plain X.509 certificate in PEM format
+as follows.
+
+@example
+$ openssl pkcs12 -in ns.p12 -clcerts -nodes > key+cert.pem
+@end example
+
+The @code{key+cert.pem} file should be pointed to from the
+@code{smime-keys} variable. You should now be able to send signed mail.
+
+@emph{Note!} Your private key is store unencrypted in the file, so take
+care in handling it.
+
+@subsection Using PGP/MIME
+
+PGP/MIME requires an external OpenPGP implementation, such as GNU
+Privacy Guard (@code{http://www.gnupg.org/}). It also requires an Emacs
+interface to it, such as Mailcrypt (available from
+@code{http://www.nb.net/~lbudney/linux/software/mailcrypt.html}) or
+Florian Weimer's @code{gpg.el}.
+
+Creating your own OpenPGP key is described in detail in the
+documentation of your OpenPGP implementation, so we refer to it.
@node Various Commands
@section Various Commands
@kindex C-c C-e
@findex message-elide-region
Elide the text between point and mark (@code{message-elide-region}).
-The text is killed and an ellipsis (@samp{[...]}) will be inserted in
-its place.
+The text is killed and replaced with the contents of the variable
+@code{message-elide-ellipsis}. The default value is to use an ellipsis
+(@samp{[...]}).
@item C-c C-z
@kindex C-c C-x
expansions have to be done explicitly.
+@node Spelling
+@section Spelling
+@cindex spelling
+@findex ispell-message
+
+There are two popular ways to have Emacs spell-check your messages:
+@code{ispell} and @code{flyspell}. @code{ispell} is the older and
+probably more popular package. You typically first write the message,
+and then run the entire thing through @code{ispell} and fix all the
+typos. To have this happen automatically when you send a message, put
+something like the following in your @file{.emacs} file:
+
+@lisp
+(add-hook 'message-send-hook 'ispell-message)
+@end lisp
+
+@vindex ispell-message-dictionary-alist
+If you're in the habit of writing in different languages, this can be
+controlled by the @code{ispell-message-dictionary-alist} variable:
+
+@lisp
+(setq ispell-message-dictionary-alist
+ '(("^Newsgroups:.*\\bde\\." . "deutsch8")
+ (".*" . "default")))
+@end lisp
+
+@code{ispell} depends on having the external @samp{ispell} command
+installed.
+
+The other popular method is using @code{flyspell}. This package checks
+your spelling while you're writing, and marks any mis-spelled words in
+various ways.
+
+To use @code{flyspell}, put something like the following in your
+@file{.emacs} file:
+
+@lisp
+(defun my-message-setup-routine ()
+ (flyspell-mode 1))
+(add-hook 'message-setup-hook 'my-message-setup-routine)
+@end lisp
+
+@code{flyspell} depends on having the external @samp{ispell} command
+installed.
+
@node Variables
@chapter Variables
@item message-generate-headers-first
@vindex message-generate-headers-first
-If non-@code{nil}, generate all headers before starting to compose the
-message.
+If non-@code{nil}, generate all required headers before starting to
+compose the message.
+
+The variables @code{message-required-mail-headers} and
+@code{message-required-news-headers} specify which headers are required.
+
+Note that some headers will be removed and re-generated before posting,
+because of the variable @code{message-deletable-headers} (see below).
@item message-from-style
@vindex message-from-style
@item message-subject-re-regexp
@vindex message-subject-re-regexp
Responses to messages have subjects that start with @samp{Re: }. This
-is @emph{not} an abbreviation of the English word ``response'', but in
+is @emph{not} an abbreviation of the English word ``response'', but is
Latin, and means ``in response to''. Some illiterate nincompoops have
failed to grasp this fact, and have ``internationalized'' their software
to use abonimations like @samp{Aw: } (``antwort'') or @samp{Sv: }
set this variable to a regexp that matches these prefixes. Myself, I
just throw away non-compliant mail.
+@item message-alternative-emails
+@vindex message-alternative-emails
+A regexp to match the alternative email addresses. The first matched
+address (not primary one) is used in the @code{From} field.
+
@end table
@vindex message-required-mail-headers
@xref{News Headers}, for the syntax of this variable. It is
@code{(From Date Subject (optional . In-Reply-To) Message-ID Lines
-(optional . X-Mailer))} by default.
+(optional . User-Agent))} by default.
@item message-ignored-mail-headers
@vindex message-ignored-mail-headers
Regexp of headers to be removed before mailing. The default is
-@samp{^[GF]cc:\\|^Resent-Fcc:}.
+@samp{^[GF]cc:\\|^Resent-Fcc:\\|^Xref:\\|^X-Draft-From:}.
@item message-default-mail-headers
@vindex message-default-mail-headers
messages via MH. Set it to @code{nil} if your MH can handle these
headers.
+@item message-send-mail-partially-limit
+@vindex message-send-mail-partially-limit
+The limitation of messages sent as message/partial.
+The lower bound of message size in characters, beyond which the message
+should be sent in several parts. If it is nil, the size is unlimited.
+
@end table
@findex system-name
@cindex Sun
This required header will be generated by Message. A unique ID will be
-created based on the date, time, user name and system name. Message will
-use @code{mail-host-address} as the fully qualified domain name (FQDN)
-of the machine if that variable is defined. If not, it will use
-@code{system-name}, which doesn't report a FQDN on some machines --
-notably Suns.
-
-@item X-Newsreader
-@cindex X-Newsreader
-This optional header will be filled out according to the
-@code{message-newsreader} local variable.
+created based on the date, time, user name and system name. Message
+will use @code{system-name} to determine the name of the system. If
+this isn't a fully qualified domain name (FQDN), Message will use
+@code{mail-host-address} as the FQDN of the machine.
-@item X-Mailer
+@item User-Agent
+@cindex User-Agent
This optional header will be filled out according to the
-@code{message-mailer} local variable, unless there already is an
-@code{X-Newsreader} header present.
+@code{message-newsreader} local variable.
@item In-Reply-To
This optional header is filled out using the @code{Date} and @code{From}
@item message-ignored-news-headers
@vindex message-ignored-news-headers
Regexp of headers to be removed before posting. The default is@*
-@samp{^NNTP-Posting-Host:\\|^Xref:\\|^[BGF]cc:\\|^Resent-Fcc:}.
+@samp{^NNTP-Posting-Host:\\|^Xref:\\|^[BGF]cc:\\|^Resent-Fcc:\\|^X-Draft-From:}.
@item message-default-news-headers
@vindex message-default-news-headers
@section Various Message Variables
@table @code
+@item message-default-charset
+@vindex message-default-charset
+@cindex charset
+Symbol naming a @sc{mime} charset. Non-ASCII characters in messages are
+assumed to be encoded using this charset. The default is @code{nil},
+which means ask the user. (This variable is used only on non-@sc{mule}
+Emacsen.
+@xref{Charset Translation, , Charset Translation, emacs-mime,
+ Emacs MIME Manual}, for details on the @sc{mule}-to-@sc{mime}
+translation process.
+
@item message-signature-separator
@vindex message-signature-separator
Regexp matching the signature separator. It is @samp{^-- *$} by
@lisp
(add-hook 'message-send-hook 'my-message-add-content)
(defun my-message-add-content ()
- (message-add-header
- "X-In-No-Sense: Nonsense"
- "X-Whatever: no"))
+ (message-add-header "X-In-No-Sense: Nonsense")
+ (message-add-header "X-Whatever: no"))
@end lisp
This function won't add the header if the header is already present.
@item message-fcc-handler-function
@vindex message-fcc-handler-function
A function called to save outgoing articles. This function will be
-called with the name of the file to store the article in. The default
+called with the name of the file to store the article in. The default
function is @code{message-output} which saves in Unix mailbox format.
@item message-courtesy-message