\begin{document}
% Adjust ../Makefile.in if you change the following line:
-\newcommand{\gnusversionname}{Ma Gnus v0.4}
+\newcommand{\gnusversionname}{Ma Gnus v0.6}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
luck.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to Ma Gnus v0.4
+This manual corresponds to Ma Gnus v0.6
@ifnottex
@insertcopying
the program.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to Ma Gnus v0.4
+This manual corresponds to Ma Gnus v0.6
@heading Other related manuals
@itemize
* Formatting Variables:: You can specify what buffers should look like.
* Window Layout:: Configuring the Gnus buffer windows.
* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
* Daemons:: Gnus can do things behind your back.
@lisp
(gnus-summary-prepared-hook
- '(lambda nil (local-set-key "d" (local-key-binding "n"))))
+ (lambda nil (local-set-key "d" (local-key-binding "n"))))
@end lisp
when the group is entered, the 'd' key will not mark the article as
"")))
@end lisp
+To see what variables are dynamically bound (like
+@code{gnus-tmp-group}), you have to look at the source code. The
+variable names aren't guaranteed to be stable over Gnus versions,
+either.
+
@node File Commands
@subsection File Commands
@xref{Mail Variables, ,Mail Variables,message,Message manual}, for more
information.
+
@node POP before SMTP
@section POP before SMTP
@cindex pop before smtp
-@findex message-smtpmail-send-it
@findex mail-source-touch-pop
-Does your @acronym{ISP} require the @acronym{POP}-before-@acronym{SMTP}
-authentication? It is whether you need to connect to the @acronym{POP}
-mail server within a certain time before sending mails. If so, there is
-a convenient way. To do that, put the following lines in your
-@file{~/.gnus.el} file:
+Does your @acronym{ISP} use @acronym{POP}-before-@acronym{SMTP}
+authentication? This authentication method simply requires you to
+contact the @acronym{POP} server before sending email. To do that,
+put the following lines in your @file{~/.gnus.el} file:
@lisp
-(setq message-send-mail-function 'message-smtpmail-send-it)
(add-hook 'message-send-mail-hook 'mail-source-touch-pop)
@end lisp
@noindent
-It means to let Gnus connect to the @acronym{POP} mail server in advance
-whenever you send a mail. The @code{mail-source-touch-pop} function
-does only a @acronym{POP} authentication according to the value of
-@code{mail-sources} without fetching mails, just before sending a mail.
-Note that you have to use @code{message-smtpmail-send-it} which runs
-@code{message-send-mail-hook} rather than @code{smtpmail-send-it} and
-set the value of @code{mail-sources} for a @acronym{POP} connection
-correctly. @xref{Mail Sources}.
+The @code{mail-source-touch-pop} function does @acronym{POP}
+authentication according to the value of @code{mail-sources} without
+fetching mails, just before sending a mail. @xref{Mail Sources}.
If you have two or more @acronym{POP} mail servers set in
@code{mail-sources}, you may want to specify one of them to
(mail-source-touch-pop))))
@end lisp
+
@node Mail and Post
@section Mail and Post
and says what authentication scheme to use. The default is
@code{password}.
+@item :leave
+Non-@code{nil} if the mail is to be left on the @acronym{POP} server
+after fetching. Mails once fetched will never be fetched again by the
+@acronym{UIDL} control. Only the built-in @code{pop3-movemail} program
+(the default) supports this keyword.
+
+If this is neither @code{nil} nor a number, all mails will be left on
+the server. If this is a number, leave mails on the server for this
+many days since you first checked new mails. If this is @code{nil}
+(the default), mails will be deleted on the server right after fetching.
+
+@vindex pop3-uidl-file
+The @code{pop3-uidl-file} variable specifies the file to which the
+@acronym{UIDL} data are locally stored. The default value is
+@file{~/.pop3-uidl}.
+
+Note that @acronym{POP} servers maintain no state information between
+sessions, so what the client believes is there and what is actually
+there may not match up. If they do not, then you may get duplicate
+mails or the whole thing can fall apart and leave you with a corrupt
+mailbox.
+
@end table
-@vindex pop3-movemail
+@findex pop3-movemail
@vindex pop3-leave-mail-on-server
If the @code{:program} and @code{:function} keywords aren't specified,
-@code{pop3-movemail} will be used. If @code{pop3-leave-mail-on-server}
-is non-@code{nil} the mail is to be left on the @acronym{POP} server
-after fetching when using @code{pop3-movemail}. Note that POP servers
-maintain no state information between sessions, so what the client
-believes is there and what is actually there may not match up. If they
-do not, then you may get duplicate mails or the whole thing can fall
-apart and leave you with a corrupt mailbox.
+@code{pop3-movemail} will be used.
Here are some examples for getting mail from a @acronym{POP} server.
+
Fetch from the default @acronym{POP} server, using the default user
name, and default fetcher:
:user "user-name" :password "secret")
@end lisp
+Leave mails on the server for 14 days:
+
+@lisp
+(pop :server "my.pop.server"
+ :user "user-name" :password "secret"
+ :leave 14)
+@end lisp
+
Use @samp{movemail} to move the mail:
@lisp
* Formatting Variables:: You can specify what buffers should look like.
* Window Layout:: Configuring the Gnus buffer windows.
* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
* Mode Lines:: Displaying information in the mode lines.
* Highlighting and Menus:: Making buffers look all nice and cozy.
* Daemons:: Gnus can do things behind your back.
Ignoring is done first; then cutting; then maxing; and then as the very
last operation, padding.
-If you use lots of these advanced thingies, you'll find that Gnus gets
-quite slow. This can be helped enormously by running @kbd{M-x
-gnus-compile} when you are satisfied with the look of your lines.
-@xref{Compilation}.
-
@node User-Defined Specs
@subsection User-Defined Specs
interface.
-@node Compilation
-@section Compilation
-@cindex compilation
-@cindex byte-compilation
-
-@findex gnus-compile
-
-Remember all those line format specification variables?
-@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
-on. Now, Gnus will of course heed whatever these variables are, but,
-unfortunately, changing them will mean a quite significant slow-down.
-(The default values of these variables have byte-compiled functions
-associated with them, while the user-generated versions do not, of
-course.)
-
-To help with this, you can run @kbd{M-x gnus-compile} after you've
-fiddled around with the variables and feel that you're (kind of)
-satisfied. This will result in the new specs being byte-compiled, and
-you'll get top speed again. Gnus will save these compiled specs in the
-@file{.newsrc.eld} file. (User-defined functions aren't compiled by
-this function, though---you should compile them yourself by sticking
-them into the @file{~/.gnus.el} file and byte-compiling that file.)
-
-
@node Mode Lines
@section Mode Lines
@cindex mode lines
If @code{inline}, the textual representation is replaced. If
@code{right}, picons are added right to the textual representation.
+@vindex gnus-picon-properties
+The value of the variable @code{gnus-picon-properties} is a list of
+properties applied to picons.
+
The following variables offer control over where things are located.
@table @code
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
like @c
-@samp{Ma Gnus v0.4} @c Adjust ../Makefile.in if you change this line!
+@samp{Ma Gnus v0.6} @c Adjust ../Makefile.in if you change this line!
@c
you have the right files loaded. Otherwise you have some old @file{.el}
files lying around. Delete these.
@lisp
(("summary"
- ("win95" -10000 nil s)
+ ("Windows 95" -10000 nil s)
("Gnus"))
("from"
("Lars" -1000))
projects / gnus / blobdiff