@setfilename gnus.info
@settitle Gnus Manual
+@include docstyle.texi
@syncodeindex fn cp
@syncodeindex vr cp
@syncodeindex pg cp
-@documentencoding UTF-8
-
@copying
Copyright @copyright{} 1995--2015 Free Software Foundation, Inc.
\begin{document}
% Adjust ../Makefile.in if you change the following line:
-\newcommand{\gnusversionname}{Ma Gnus v0.12}
+\newcommand{\gnusversionname}{Ma Gnus v0.14}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
luck.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to Ma Gnus v0.12
+This manual corresponds to Ma Gnus v0.14
@ifnottex
@insertcopying
the program.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to Ma Gnus v0.12
+This manual corresponds to Ma Gnus v0.14
@heading Other related manuals
@itemize
Treat quoted-printable (@code{gnus-article-de-quoted-unreadable}).
Quoted-Printable is one common @acronym{MIME} encoding employed when
sending non-@acronym{ASCII} (i.e., 8-bit) articles. It typically
-makes strings like @samp{d@'ej@`a vu} look like @samp{d=E9j=E0 vu},
+makes strings like @samp{déjà vu} look like @samp{d=E9j=E0 vu},
which doesn't look very readable to me. Note that this is usually
done automatically by Gnus if the message in question has a
@code{Content-Transfer-Encoding} header that says that this encoding
@ifinfo
@c Avoid sort of redundant entries in the same section for the printed
-@c manual, but add them in info to allow `i gnus-treat-foo-bar RET' or
-@c `i foo-bar'.
+@c manual, but add them in info to allow 'i gnus-treat-foo-bar RET' or
+@c 'i foo-bar'.
@vindex gnus-treat-buttonize
@vindex gnus-treat-buttonize-head
@vindex gnus-treat-capitalize-sentences
can use this option, and customize @code{nnimap-shell-program} to be
what you need.
+@item plain
+Non-encrypted and unsafe straight socket connection.
+@acronym{STARTTLS} will not be used even if it is available.
+
@end table
@item nnimap-authenticator
@samp{cram-md5}, @samp{anonymous} or the default @samp{login}.
@item :program
-When using the `shell' :stream, the contents of this variable is
+When using the @samp{shell} :stream, the contents of this variable is
mapped into the @code{imap-shell-program} variable. This should be a
@code{format}-like string (or list of strings). Here's an example:
If the search engine changes its output substantially, @code{nnweb}
won't be able to parse it and will fail. One could hardly fault the Web
-providers if they were to do this---their @emph{raison d'@^etre} is to
+providers if they were to do this---their @emph{raison d'être} is to
make money off of advertisements, not to provide services to the
community. Since @code{nnweb} washes the ads off all the articles, one
might think that the providers might be somewhat miffed. We'll see.
@item
You forget all about it and keep on getting and reading new mail, as usual.
@item
-From time to time, as you type `g' in the group buffer and as the date
+From time to time, as you type @kbd{g} in the group buffer and as the date
is getting closer, the message will pop up again to remind you of your
appointment, just as if it were new and unread.
@item
@end table
@item
-If you are scoring on `e' (extra) headers, you will then be prompted for
+If you are scoring on @samp{e} (extra) headers, you will then be prompted for
the header name on which you wish to score. This must be a header named
in gnus-extra-headers, and @samp{TAB} completion is available.
To work correctly the @code{nnir-namazu-remove-prefix} variable must
also be correct. This is the prefix to remove from each file name
-returned by Namazu in order to get a proper group name (albeit with `/'
-instead of `.').
+returned by Namazu in order to get a proper group name (albeit with @samp{/}
+instead of @samp{.}).
For example, suppose that Namazu returns file names such as
@samp{/home/john/Mail/mail/misc/42}. For this example, use the
Extra switches may be passed to the namazu search command by setting the
variable @code{nnir-namazu-additional-switches}. It is particularly
important not to pass any any switches to namazu that will change the
-output format. Good switches to use include `--sort', `--ascending',
-`--early' and `--late'. Refer to the Namazu documentation for further
+output format. Good switches to use include @option{--sort},
+@option{--ascending}, @option{--early} and @option{--late}.
+Refer to the Namazu documentation for further
information on valid switches.
-Mail must first be indexed with the `mknmz' program. Read the documentation
-for namazu to create a configuration file. Here is an example:
+Mail must first be indexed with the @command{mknmz} program. Read the
+documentation for namazu to create a configuration file. Here is an
+example:
@cartouche
@example
package conf; # Don't remove this line!
- # Paths which will not be indexed. Don't use `^' or `$' anchors.
+ # Paths which will not be indexed. Don't use '^' or '$' anchors.
$EXCLUDE_PATH = "spam|sent";
# Header fields which should be searchable. case-insensitive
@item nnir-summary-line-format
The format specification to be used for lines in an nnir summary buffer.
-All the items from `gnus-summary-line-format' are available, along with
+All the items from @code{gnus-summary-line-format} are available, along with
three items unique to nnir summary buffers:
@example
@item nnir-retrieve-headers-override-function
If non-@code{nil}, a function that retrieves article headers rather than using
the gnus built-in function. This function takes an article list and
-group as arguments and populates the `nntp-server-buffer' with the
+group as arguments and populates the @code{nntp-server-buffer} with the
retrieved headers. It should then return either 'nov or 'headers
indicating the retrieved header format. Failure to retrieve headers
should return @code{nil}.
@lisp
;; show the marks as single characters (see the :char property in
-;; `gnus-registry-marks'):
+;; 'gnus-registry-marks'):
;; (defalias 'gnus-user-format-function-M 'gnus-registry-article-marks-to-chars)
-;; show the marks by name (see `gnus-registry-marks'):
+;; show the marks by name (see 'gnus-registry-marks'):
;; (defalias 'gnus-user-format-function-M 'gnus-registry-article-marks-to-names)
@end lisp
Kevin Davidson---came up with the name @dfn{ding}, so blame him.
@item
-Fran@,{c}ois Pinard---many, many interesting and thorough bug reports, as
+François Pinard---many, many interesting and thorough bug reports, as
well as autoconf support.
@end itemize
Richard Hoskins,
Brad Howes,
Miguel de Icaza,
-Fran@,{c}ois Felix Ingrand,
+François Felix Ingrand,
Tatsuya Ichikawa, @c Ichikawa
Ishikawa Ichiro, @c Ishikawa
Lee Iverson,
directory is not used any more. You can safely delete the entire
hierarchy.
-@c FIXME: `gnus-load' is mentioned in README, which is not included in
+@c FIXME: 'gnus-load' is mentioned in README, which is not included in
@c the repository. We should find a better place for this item.
@item
@code{(require 'gnus-load)}
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
like @c
-@samp{Ma Gnus v0.12} @c Adjust ../Makefile.in if you change this line!
+@samp{Ma Gnus v0.14} @c Adjust ../Makefile.in if you change this line!
@c
you have the right files loaded. Otherwise you have some old @file{.el}
files lying around. Delete these.