@syncodeindex vr cp
@syncodeindex pg cp
-@documentencoding ISO-8859-1
+@documentencoding UTF-8
@copying
-Copyright @copyright{} 1995-2011 Free Software Foundation, Inc.
+Copyright @copyright{} 1995-2012 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
\begin{document}
% Adjust ../Makefile.in if you change the following line:
-\newcommand{\gnusversionname}{No Gnus v0.18}
+\newcommand{\gnusversionname}{Ma Gnus v0.2}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
luck.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to No Gnus v0.18
+This manual corresponds to Ma Gnus v0.2
@ifnottex
@insertcopying
the program.
@c Adjust ../Makefile.in if you change the following line:
-This manual corresponds to No Gnus v0.18
+This manual corresponds to Ma Gnus v0.2
@heading Other related manuals
@itemize
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
-* No Gnus:: Very punny.
+* No Gnus:: Very punny. Gnus 5.12/5.13
+* Ma Gnus:: Celebrating 25 years of Gnus.
Customization
@vindex gnus-auto-subscribed-categories
As if that wasn't enough, @code{gnus-auto-subscribed-categories} also
-allows you to specify that new groups should be subcribed based on the
+allows you to specify that new groups should be subscribed based on the
category their select methods belong to. The default is @samp{(mail
post-mail)}, meaning that all new groups from mail-like backends
should be subscribed automatically.
(to-group . "\\1"))
("mail\\.me"
- (gnus-use-scoring t))
+ (gnus-use-scoring t))
("list\\..*"
(total-expire . t)
(broken-reply-to . t))))
@end lisp
-String value of parameters will be subjected to regexp substitution, as
-the @code{to-group} example shows.
+All clauses that matches the group name will be used, but the last
+setting ``wins''. So if you have two clauses that both match the
+group name, and both set, say @code{display}, the last setting will
+override the first.
+
+Parameters that are strings will be subjected to regexp substitution,
+as the @code{to-group} example shows.
@vindex gnus-parameters-case-fold-search
By default, whether comparing the group name and one of those regexps
@table @kbd
-@item H f
-@kindex H f (Group)
-@findex gnus-group-fetch-faq
-@vindex gnus-group-faq-directory
-@cindex FAQ
-@cindex ange-ftp
-Try to fetch the @acronym{FAQ} for the current group
-(@code{gnus-group-fetch-faq}). Gnus will try to get the @acronym{FAQ}
-from @code{gnus-group-faq-directory}, which is usually a directory on
-a remote machine. This variable can also be a list of directories.
-In that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} (or @code{efs}) will be
-used for fetching the file.
-
-If fetching from the first site is unsuccessful, Gnus will attempt to go
-through @code{gnus-group-faq-directory} and try to open them one by one.
-
@item H d
@itemx C-c C-d
@c @icon{gnus-group-describe-group}
the @code{sieve} group parameter (@pxref{Group Parameters}) to specify
sieve rules that should apply to each group. Gnus provides two
commands to translate all these group parameters into a proper Sieve
-script that can be transfered to the server somehow.
+script that can be transferred to the server somehow.
@vindex gnus-sieve-file
@vindex gnus-sieve-region-start
Files with a @acronym{MIME} type matching this variable won't be viewed.
Note that Gnus tries to guess what type the file is based on the name.
@code{gnus-uu} is not a @acronym{MIME} package (yet), so this is slightly
-kludgey.
+kludgy.
@item gnus-uu-tmp-dir
@vindex gnus-uu-tmp-dir
Translate many non-@acronym{ASCII} characters into their
@acronym{ASCII} equivalents (@code{gnus-article-treat-non-ascii}).
This is mostly useful if you're on a terminal that has a limited font
-and does't show accented characters, ``advanced'' punctuation, and the
-like. For instance, @samp{»} is tranlated into @samp{>>}, and so on.
+and doesn't show accented characters, ``advanced'' punctuation, and the
+like. For instance, @samp{»} is translated into @samp{>>}, and so on.
@item W Y f
@kindex W Y f (Summary)
@item r (Article)
@kindex r (Article)
Prompt for a file name, replace the @acronym{MIME} object with an
-external body refering to the file via the message/external-body
+external body referring to the file via the message/external-body
@acronym{MIME} type. (@code{gnus-mime-replace-part}).
@findex gnus-mime-delete-part
@findex nntp-open-tls-stream
@item nntp-open-tls-stream
Opens a connection to a server over a @dfn{secure} channel. To use
-this you must have @uref{http://www.gnu.org/software/gnutls/, GNUTLS}
+this you must have @uref{http://www.gnu.org/software/gnutls/, GnuTLS}
installed. You then define a server as follows:
@lisp
@item mail-source-default-file-modes
@vindex mail-source-default-file-modes
-All new mail files will get this file mode. The default is 384.
+All new mail files will get this file mode. The default is @code{#o600}.
@item mail-source-movemail-program
@vindex mail-source-movemail-program
@lisp
(add-hook 'nnmail-pre-get-new-mail-hook
- (lambda () (set-default-file-modes 511)))
+ (lambda () (set-default-file-modes #o700)))
(add-hook 'nnmail-post-get-new-mail-hook
- (lambda () (set-default-file-modes 551)))
+ (lambda () (set-default-file-modes #o775)))
@end lisp
@item nnmail-use-long-file-names
@kbd{J a} on the server (or servers) that you wish to have covered by the
Agent (@pxref{Server Agent Commands}), or @kbd{J r} on automatically
added servers you do not wish to have covered by the Agent. By default,
-all @code{nntp} and @code{nnimap} servers in @code{gnus-select-method} and
-@code{gnus-secondary-select-methods} are agentized.
+no servers are agentized.
@item
Decide on download policy. It's fairly simple once you decide whether
as running @kbd{J a} on the servers (@pxref{Server Agent Commands}).
If the file exist, you must manage the servers manually by adding or
removing them, this variable is only applicable the first time you
-start Gnus. The default is @samp{(nntp nnimap)}.
+start Gnus. The default is @samp{nil}.
@end table
This will ensure that you can raise/lower the score of an entire thread,
even though some articles in the thread may not have complete
@code{References} headers. Note that using this may lead to
-undeterministic scores of the articles in the thread. (Using this match
+nondeterministic scores of the articles in the thread. (Using this match
key will lead to creation of @file{ADAPT} files.)
@end table
@end enumerate
@item !
@itemx not
-@itemx ¬
+@itemx Ã\82¬
This logical operator only takes a single argument. It returns the
logical negation of the value of its argument.
AND, OR, and NOT are supported, and parentheses can be used to control
operator precedence, e.g. (emacs OR xemacs) AND linux. Note that
operators must be written with all capital letters to be
-recognised. Also preceding a term with a - sign is equivalent to NOT
+recognized. Also preceding a term with a - sign is equivalent to NOT
term.
@item Automatic AND queries
AND, OR, NOT (or AND NOT), and XOR are supported, and brackets can be
used to control operator precedence, e.g. (emacs OR xemacs) AND linux.
Note that operators must be written with all capital letters to be
-recognised.
+recognized.
@item Required and excluded terms
+ and - can be used to require or exclude terms, e.g. football -american
@node The swish++ Engine
@subsubsection The swish++ Engine
-FIXEM: Say something more here.
+FIXME: Say something more here.
Documentation for swish++ may be found at the swish++ sourceforge page:
@uref{http://swishplusplus.sourceforge.net}
@node The swish-e Engine
@subsubsection The swish-e Engine
-FIXEM: Say something more here.
+FIXME: Say something more here.
Documentation for swish-e may be found at the swish-e homepage
@uref{http://swish-e.org}
automatically set for the original article. This is exactly what
@emph{marks propagation} is about.
-Marks propagation is deactivated by default. You can activate it for a
+Marks propagation is inactive by default. You can activate it for a
certain @code{nnmairix} group with
@code{nnmairix-group-toggle-propmarks-this-group} (bound to @kbd{G b
p}). This function will warn you if you try to use it with your default
(nnml "mairix" (nnml-directory "mairix") (nnml-get-new-mail nil))
@end lisp
-(The @code{nnmaildir} back end also has a server variabe
+(The @code{nnmaildir} back end also has a server variable
@code{get-new-mail}, but its default value is @code{nil}, so you don't
have to explicitly set it if you use a @code{nnmaildir} server just for
mairix.)
@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
@cindex %<<, %>>, guillemets
-@c @cindex %<<, %>>, %«, %», guillemets
+@c @cindex %<<, %>>, %Ã\82«, %Ã\82», guillemets
@vindex gnus-balloon-face-0
Text inside the @samp{%<<} and @samp{%>>} specifiers will get the
special @code{balloon-help} property set to
Write @code{spam-blackbox-register-routine} and
@code{spam-blackbox-unregister-routine} using the bogofilter
-register/unregister routines as a start, or other restister/unregister
+register/unregister routines as a start, or other register/unregister
routines more appropriate to Blackbox, if Blackbox can
register/unregister spam and ham.
@cindex Pterodactyl Gnus
@cindex Oort Gnus
@cindex No Gnus
+@cindex Ma Gnus
@cindex Gnus versions
The first ``proper'' release of Gnus 5 was done in November 1995 when it
http://git.gnus.org for details (http://www.gnus.org will be updated
with the information when possible).
+On the January 31th 2012, Ma Gnus was begun.
+
If you happen upon a version of Gnus that has a prefixed name --
``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'',
-``Pterodactyl Gnus'', ``Oort Gnus'', ``No Gnus'' -- don't panic.
-Don't let it know that you're frightened. Back away. Slowly. Whatever
-you do, don't run. Walk away, calmly, until you're out of its reach.
-Find a proper released version of Gnus and snuggle up to that instead.
+``Pterodactyl Gnus'', ``Oort Gnus'', ``No Gnus'', ``Ma Gnus'' -- don't
+panic. Don't let it know that you're frightened. Back away. Slowly.
+Whatever you do, don't run. Walk away, calmly, until you're out of
+its reach. Find a proper released version of Gnus and snuggle up to
+that instead.
@node Why?
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
* Oort Gnus:: It's big. It's far out. Gnus 5.10/5.11.
-* No Gnus:: Very punny.
+* No Gnus:: Very punny. Gnus 5.12/5.13.
+* Ma Gnus:: Celebrating 25 years of Gnus.
@end menu
These lists are, of course, just @emph{short} overviews of the
been added.
@item
-@code{nndoc} was rewritten to be easily extendable (@pxref{Document
+@code{nndoc} was rewritten to be easily extensible (@pxref{Document
Server Internals}).
@item
@acronym{TLS} wrapper shipped with Gnus
@acronym{TLS}/@acronym{SSL} is now supported in @acronym{IMAP} and
-@acronym{NNTP} via @file{tls.el} and GNUTLS.
+@acronym{NNTP} via @file{tls.el} and GnuTLS.
@item
Improved anti-spam features.
@include gnus-news.texi
+@node Ma Gnus
+@subsubsection Ma Gnus
+@cindex Ma Gnus
+
+I'm sure there will be lots of text here. It's really spelled 真
+Gnus.
+
@iftex
@page
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
like @c
-@samp{No Gnus v0.18} @c Adjust ../Makefile.in if you change this line!
+@samp{Ma Gnus v0.2} @c Adjust ../Makefile.in if you change this line!
@c
you have the right files loaded. Otherwise you have some old @file{.el}
files lying around. Delete these.
@node Score File Syntax
@subsection Score File Syntax
-Score files are meant to be easily parseable, but yet extremely
+Score files are meant to be easily parsable, but yet extremely
malleable. It was decided that something that had the same read syntax
as an Emacs Lisp list would fit that spec.
@c Local Variables:
@c mode: texinfo
-@c coding: iso-8859-1
+@c coding: utf-8
@c End: