@setfilename gnus
@settitle Gnus Manual
-@synindex fn cp
-@synindex vr cp
-@synindex pg cp
+@syncodeindex fn cp
+@syncodeindex vr cp
+@syncodeindex pg cp
@dircategory Emacs
@direntry
* Gnus: (gnus). The newsreader Gnus.
@end direntry
+@documentencoding ISO-8859-1
@iftex
@finalout
@end iftex
\makeindex
\begin{document}
-\newcommand{\gnusversionname}{Oort Gnus v0.17}
+\newcommand{\gnusversionname}{Gnus v5.10.6}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
\newcommand{\gnustt}[1]{{\gnusselectttfont{}#1}}
\newcommand{\gnuscode}[1]{\gnustt{#1}}
+\newcommand{\gnusasis}[1]{\gnustt{#1}}
+\newcommand{\gnusurl}[1]{\gnustt{#1}}
+\newcommand{\gnuscommand}[1]{\gnustt{#1}}
+\newcommand{\gnusenv}[1]{\gnustt{#1}}
\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\gnusselectttfont{}#1}''}
\newcommand{\gnuslisp}[1]{\gnustt{#1}}
\newcommand{\gnuskbd}[1]{`\gnustt{#1}'}
\newcommand{\gnusfile}[1]{`\gnustt{#1}'}
\newcommand{\gnusdfn}[1]{\textit{#1}}
\newcommand{\gnusi}[1]{\textit{#1}}
+\newcommand{\gnusr}[1]{\textrm{#1}}
\newcommand{\gnusstrong}[1]{\textbf{#1}}
\newcommand{\gnusemph}[1]{\textit{#1}}
\newcommand{\gnusvar}[1]{{\fontsize{10pt}{10}\selectfont\textsl{\textsf{#1}}}}
\newcommand{\gnusversion}[1]{{\small\textit{#1}}}
\newcommand{\gnusauthor}[1]{{\large\textbf{#1}}}
\newcommand{\gnusresult}[1]{\gnustt{=> #1}}
-\newcommand{\gnusacronym}[1]{\textit{#1}}
+\newcommand{\gnusacronym}[1]{\textsc{#1}}
\newcommand{\gnusemail}[1]{\textit{#1}}
\newcommand{\gnusbullet}{{${\bullet}$}}
}
}{\end{list}}
+\newenvironment{asislist}%
+{\begin{list}{}{
+}
+}{\end{list}}
+
\newenvironment{kbdlist}%
{\begin{list}{}{
\labelwidth=0cm
\thispagestyle{empty}
Copyright \copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003
+2002, 2003, 2004
Free Software Foundation, Inc.
This file documents Gnus, the GNU Emacs newsreader.
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@vskip 0pt plus 1filll
Copyright @copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003
+2002, 2003, 2004
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@ifinfo
You can read news (and mail) from within Emacs by using Gnus. The news
-can be gotten by any nefarious means you can think of---@sc{nntp}, local
+can be gotten by any nefarious means you can think of---@acronym{NNTP}, local
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Oort Gnus v0.17.
+This manual corresponds to Gnus v5.10.6.
@end ifinfo
* Scoring:: Assigning values to articles.
* Various:: General purpose settings.
* The End:: Farewell and goodbye.
-* Appendices:: Terminology, Emacs intro, FAQ, History, Internals.
+* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
* Index:: Variable, function and concept index.
* Key Index:: Key Index.
Other related manuals
* Message:(message). Composing messages.
-* Emacs-MIME:(emacs-mime). Composing messages; MIME-specific parts.
+* Emacs-MIME:(emacs-mime). Composing messages; @acronym{MIME}-specific parts.
* Sieve:(sieve). Managing Sieve scripts in Emacs.
-* PGG:(pgg). PGP/MIME with Gnus.
+* PGG:(pgg). @acronym{PGP/MIME} with Gnus.
+* SASL:(sasl). @acronym{SASL} authentication in Emacs.
@detailmenu
--- The Detailed Node Listing ---
Group Buffer Format
* Group Line Specification:: Deciding how the group buffer is to look.
-* Group Modeline Specification:: The group buffer modeline.
+* Group Mode Line Specification:: The group buffer mode line.
* Group Highlighting:: Having nice colors in the group buffer.
Group Topics
* Summary Mail Commands:: Sending mail.
* Summary Post Commands:: Sending news.
* Summary Message Commands:: Other Message-related commands.
-* Canceling and Superseding::
+* Canceling and Superseding::
Marking Articles
* Unread Articles:: Marks for unread articles.
* Read Articles:: Marks for read articles.
* Other Marks:: Marks that do not affect readedness.
-* Setting Marks::
-* Generic Marking Commands::
-* Setting Process Marks::
Marking Articles
* Article Date:: Grumble, UT!
* Article Display:: Display various stuff---X-Face, Picons, Smileys
* Article Signature:: What is a signature?
-* Article Miscellania:: Various other stuff.
+* Article Miscellanea:: Various other stuff.
Alternative Approaches
* Summary Group Information:: Information oriented commands.
* Searching for Articles:: Multiple article commands.
-* Summary Generation Commands::
+* Summary Generation Commands::
* Really Various Summary Commands:: Those pesky non-conformant commands.
Article Buffer
* Hiding Headers:: Deciding what headers should be displayed.
-* Using MIME:: Pushing articles through @sc{mime} before reading them.
+* Using MIME:: Pushing articles through @acronym{MIME} before reading them.
* Customizing Articles:: Tailoring the look of the articles.
* Article Keymap:: Keystrokes available in the article buffer.
* Misc Article:: Other stuff.
* Mail:: Mailing and replying.
* Posting Server:: What server should you post and mail via?
+* POP before SMTP:: You cannot send a mail unless you read a mail.
* Mail and Post:: Mailing and posting at the same time.
* Archived Messages:: Where Gnus stores the messages you've sent.
* Posting Styles:: An easier way to specify who you are.
* Getting News:: Reading USENET news with Gnus.
* Getting Mail:: Reading your personal mail with Gnus.
* Browsing the Web:: Getting messages from a plethora of Web sources.
-* IMAP:: Using Gnus as a @sc{imap} client.
+* IMAP:: Using Gnus as a @acronym{IMAP} client.
* Other Sources:: Reading directories, files, SOUP packets.
* Combined Groups:: Combining groups into one group.
* Gnus Unplugged:: Reading news and mail offline.
Getting News
-* NNTP:: Reading news from an @sc{nntp} server.
+* NNTP:: Reading news from an @acronym{NNTP} server.
* News Spool:: Reading news from the local spool.
-@sc{nntp}
+@acronym{NNTP}
* Direct Functions:: Connecting directly to the server.
* Indirect Functions:: Connecting indirectly to the server.
* Group Mail Splitting:: Use group customize to drive mail splitting.
* Incorporating Old Mail:: What about the old mail you have?
* Expiring Mail:: Getting rid of unwanted mail.
-* Washing Mail:: Removing gruft from the mail you get.
+* Washing Mail:: Removing cruft from the mail you get.
* Duplicates:: Dealing with duplicated mail.
* Not Reading Mail:: Using mail back ends for reading other files.
* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
Choosing a Mail Back End
* Unix Mail Box:: Using the (quite) standard Un*x mbox.
-* Rmail Babyl:: Emacs programs use the rmail babyl format.
+* Rmail Babyl:: Emacs programs use the Rmail Babyl format.
* Mail Spool:: Store your mail in a private spool?
* MH Spool:: An mhspool-like back end.
* Maildir:: Another one-file-per-message format.
Browsing the Web
-* Archiving Mail::
+* Archiving Mail::
* Web Searches:: Creating groups from articles that match a string.
* Slashdot:: Reading the Slashdot comments.
* Ultimate:: The Ultimate Bulletin Board systems.
* RSS:: Reading RDF site summary.
* Customizing w3:: Doing stuff to Emacs/w3 from Gnus.
-@sc{imap}
+@acronym{IMAP}
* Splitting in IMAP:: Splitting mail with nnimap.
* Expiring in IMAP:: Expiring mail with nnimap.
* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
* Expunging mailboxes:: Equivalent of a ``compress mailbox'' button.
-* A note on namespaces:: How to (not) use IMAP namespace in Gnus.
+* A note on namespaces:: How to (not) use @acronym{IMAP} namespace in Gnus.
+* Debugging IMAP:: What to do when things don't work.
Other Sources
* Agent Basics:: How it all is supposed to work.
* Agent Categories:: How to tell the Gnus Agent what to download.
* Agent Commands:: New commands for all the buffers.
+* Agent Visuals:: Ways that the agent may effect your summary buffer.
* Agent as Cache:: The Agent is a big cache too.
* Agent Expiry:: How to make old articles go away.
* Agent Regeneration:: How to recover from lost connections and other accidents.
-* Agent and IMAP:: How to use the Agent with IMAP.
+* Agent and IMAP:: How to use the Agent with @acronym{IMAP}.
* Outgoing Messages:: What happens when you post/mail something?
* Agent Variables:: Customizing is fun.
-* Example Setup:: An example @file{.gnus.el} file for offline people.
+* Example Setup:: An example @file{~/.gnus.el} file for offline people.
* Batching Agents:: How to fetch news from a @code{cron} job.
* Agent Caveats:: What you think it'll do and what it does.
* Global Score Files:: Earth-spanning, ear-splitting score files.
* Kill Files:: They are still here, but they can be ignored.
* Converting Kill Files:: Translating kill files to score files.
-* GroupLens:: Getting predictions on what you like to read.
* Advanced Scoring:: Using logical expressions to build score rules.
* Score Decays:: It can be useful to let scores wither away.
-GroupLens
-
-* Using GroupLens:: How to make Gnus use GroupLens.
-* Rating Articles:: Letting GroupLens know how you rate articles.
-* Displaying Predictions:: Displaying predictions given by GroupLens.
-* GroupLens Variables:: Customizing GroupLens.
-
Advanced Scoring
* Advanced Scoring Syntax:: A definition.
* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
* Fuzzy Matching:: What's the big fuzz?
* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Other modes:: Interaction with other modes.
* Various Various:: Things that are really various.
Formatting Variables
Image Enhancements
-* Picons:: How to display pictures of what you're reading.
-* Smileys:: Show all those happy faces the way they were meant to be shown.
* X-Face:: Display a funky, teensy black-and-white image.
+* Face:: Display a funkier, teensier colored image.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* Picons:: How to display pictures of what you're reading.
* XVarious:: Other XEmacsy Gnusey variables.
Thwarting Email Spam
* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
* SpamAssassin:: How to use external anti-spam tools.
* Hashcash:: Reduce spam by burning CPU time.
-* Filtering Spam Using The Spam ELisp Package::
-* Filtering Spam Using Statistics with spam-stat::
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
+
+Filtering Spam Using The Spam ELisp Package
+
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
+
+Filtering Spam Using Statistics with spam-stat
+
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
Appendices
* Troubleshooting:: What you might try if things do not work.
* Gnus Reference Guide:: Rilly, rilly technical stuff.
* Emacs for Heathens:: A short introduction to Emacsian terms.
-* Frequently Asked Questions::
+* Frequently Asked Questions:: The Gnus FAQ
History
* Red Gnus:: Third time best---Gnus 5.4/5.5.
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* No Gnus:: Lars, FIXME!
Customization
@kbd{M-x gnus-other-frame} instead.
If things do not go smoothly at startup, you have to twiddle some
-variables in your @file{~/.gnus} file. This file is similar to
-@file{~/.emacs}, but is read when gnus starts.
+variables in your @file{~/.gnus.el} file. This file is similar to
+@file{~/.emacs}, but is read when Gnus starts.
If you puzzle at any terms used in this manual, please refer to the
terminology section (@pxref{Terminology}).
native method. All groups not fetched with this method are
foreign groups.
-For instance, if the @samp{news.somewhere.edu} @sc{nntp} server is where
+For instance, if the @samp{news.somewhere.edu} @acronym{NNTP} server is where
you want to get your daily dosage of news from, you'd say:
@lisp
@vindex gnus-nntpserver-file
@cindex NNTPSERVER
-@cindex @sc{nntp} server
+@cindex @acronym{NNTP} server
If this variable is not set, Gnus will take a look at the
-@code{NNTPSERVER} environment variable. If that variable isn't set,
+@env{NNTPSERVER} environment variable. If that variable isn't set,
Gnus will see whether @code{gnus-nntpserver-file}
-(@file{/etc/nntpserver} by default) has any opinions on the matter. If
-that fails as well, Gnus will try to use the machine running Emacs as an @sc{nntp} server. That's a long shot, though.
+(@file{/etc/nntpserver} by default) has any opinions on the matter.
+If that fails as well, Gnus will try to use the machine running Emacs
+as an @acronym{NNTP} server. That's a long shot, though.
@vindex gnus-nntp-server
If @code{gnus-nntp-server} is set, this variable will override
@vindex gnus-secondary-servers
@vindex gnus-nntp-server
You can also make Gnus prompt you interactively for the name of an
-@sc{nntp} server. If you give a non-numerical prefix to @code{gnus}
+@acronym{NNTP} server. If you give a non-numerical prefix to @code{gnus}
(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
in the @code{gnus-secondary-servers} list (if any). You can also just
type in the name of any server you feel like visiting. (Note that this
@findex gnus-group-browse-foreign-server
@kindex B (Group)
-However, if you use one @sc{nntp} server regularly and are just
+However, if you use one @acronym{NNTP} server regularly and are just
interested in a couple of groups from a different server, you would be
better served by using the @kbd{B} command in the group buffer. It will
let you have a look at what groups are available, and you can subscribe
@vindex gnus-auto-subscribed-groups
Yet another variable that meddles here is
@code{gnus-auto-subscribed-groups}. It works exactly like
-@code{gnus-options-subscribe}, and is therefore really superfluous, but I
-thought it would be nice to have two of these. This variable is more
-meant for setting some ground rules, while the other variable is used
-more for user fiddling. By default this variable makes all new groups
-that come from mail back ends (@code{nnml}, @code{nnbabyl},
+@code{gnus-options-subscribe}, and is therefore really superfluous,
+but I thought it would be nice to have two of these. This variable is
+more meant for setting some ground rules, while the other variable is
+used more for user fiddling. By default this variable makes all new
+groups that come from mail back ends (@code{nnml}, @code{nnbabyl},
@code{nnfolder}, @code{nnmbox}, @code{nnmh}, and @code{nnmaildir})
subscribed. If you don't like that, just set this variable to
@code{nil}.
@section Changing Servers
@cindex changing servers
-Sometimes it is necessary to move from one @sc{nntp} server to another.
+Sometimes it is necessary to move from one @acronym{NNTP} server to another.
This happens very rarely, but perhaps you change jobs, or one server is
very flaky and you want to use another.
@emph{Wrong!}
Article numbers are not (in any way) kept synchronized between different
-@sc{nntp} servers, and the only way Gnus keeps track of what articles
+@acronym{NNTP} servers, and the only way Gnus keeps track of what articles
you have read is by keeping track of article numbers. So when you
change @code{gnus-select-method}, your @file{.newsrc} file becomes
worthless.
If this variable is @code{nil}, Gnus will ask for group info in total
lock-step, which isn't very fast. If it is @code{some} and you use an
-@sc{nntp} server, Gnus will pump out commands as fast as it can, and
+@acronym{NNTP} server, Gnus will pump out commands as fast as it can, and
read all the replies in one swoop. This will normally result in better
performance, but if the server does not support the aforementioned
@code{LIST ACTIVE group} command, this isn't very nice to the server.
If non-@code{nil}, the startup message won't be displayed. That way,
your boss might not notice as easily that you are reading news instead
of doing your job. Note that this variable is used before
-@file{.gnus.el} is loaded, so it should be set in @file{.emacs} instead.
+@file{~/.gnus.el} is loaded, so it should be set in @file{.emacs} instead.
@item gnus-no-groups-message
@vindex gnus-no-groups-message
@menu
* Group Line Specification:: Deciding how the group buffer is to look.
-* Group Modeline Specification:: The group buffer modeline.
+* Group Mode Line Specification:: The group buffer mode line.
* Group Highlighting:: Having nice colors in the group buffer.
@end menu
There should always be a colon on the line; the cursor always moves to
the colon after performing an operation. @xref{Positioning
-Point}. Nothing else is required---not even the group name. All
+Point}. Nothing else is required---not even the group name. All
displayed text is just window dressing, and is never examined by Gnus.
Gnus stores all real information it needs using text properties.
Estimated total number of articles. (This is really @var{max-number}
minus @var{min-number} plus 1.)
-Gnus uses this estimation because the @sc{nntp} protocol provides
+Gnus uses this estimation because the @acronym{NNTP} protocol provides
efficient access to @var{max-number} and @var{min-number} but getting
the true unread message count is not possible efficiently. For
hysterical raisins, even the mail back ends, where the true number of
comment element in the group parameters.
@item D
-Newsgroup description.
+Newsgroup description. You need to read the group descriptions
+before these will appear, and to do that, you either have to set
+@code{gnus-read-active-file} or use the group buffer @kbd{M-d}
+command.
@item o
@samp{m} if moderated.
group, or a bogus native group.
-@node Group Modeline Specification
-@subsection Group Modeline Specification
-@cindex group modeline
+@node Group Mode Line Specification
+@subsection Group Mode Line Specification
+@cindex group mode line
@vindex gnus-group-mode-line-format
The mode line can be changed by setting
(defface my-group-face-1
'((t (:foreground "Red" :bold t))) "First group face")
(defface my-group-face-2
- '((t (:foreground "DarkSeaGreen4" :bold t))) "Second group face")
+ '((t (:foreground "DarkSeaGreen4" :bold t)))
+ "Second group face")
(defface my-group-face-3
'((t (:foreground "Green4" :bold t))) "Third group face")
(defface my-group-face-4
@end table
@vindex gnus-large-newsgroup
-The @code{gnus-large-newsgroup} variable says what Gnus should consider
-to be a big group. This is 200 by default. If the group has more
+The @code{gnus-large-newsgroup} variable says what Gnus should
+consider to be a big group. If it is @code{nil}, no groups are
+considered big. The default value is 200. If the group has more
(unread and/or ticked) articles than this, Gnus will query the user
-before entering the group. The user can then specify how many articles
-should be fetched from the server. If the user specifies a negative
-number (@code{-n}), the @code{n} oldest articles will be fetched. If it
-is positive, the @code{n} articles that have arrived most recently will
-be fetched.
+before entering the group. The user can then specify how many
+articles should be fetched from the server. If the user specifies a
+negative number (@var{-n}), the @var{n} oldest articles will be
+fetched. If it is positive, the @var{n} articles that have arrived
+most recently will be fetched.
+
+@vindex gnus-large-ephemeral-newsgroup
+@code{gnus-large-ephemeral-newsgroup} is the same as
+@code{gnus-large-newsgroup}, but is only used for ephemeral
+newsgroups.
@vindex gnus-select-group-hook
@vindex gnus-auto-select-first
@item M-x gnus-group-clear-data-on-native-groups
@kindex M-x gnus-group-clear-data-on-native-groups
@findex gnus-group-clear-data-on-native-groups
-If you have switched from one @sc{nntp} server to another, all your marks
+If you have switched from one @acronym{NNTP} server to another, all your marks
and read ranges have become worthless. You can use this command to
clear out all data that you have on your native groups. Use with
caution.
@cindex making groups
Make a new group (@code{gnus-group-make-group}). Gnus will prompt you
for a name, a method and possibly an @dfn{address}. For an easier way
-to subscribe to @sc{nntp} groups, @pxref{Browse Foreign Server}.
+to subscribe to @acronym{NNTP} groups (@pxref{Browse Foreign Server}).
+
+@item G M
+@kindex G M (Group)
+@findex gnus-group-read-ephemeral-group
+Make an ephemeral group (@code{gnus-group-read-ephemeral-group}). Gnus
+will prompt you for a name, a method and an @dfn{address}.
@item G r
@kindex G r (Group)
to a particular group by using a match string like
@samp{shaving group:alt.sysadmin.recovery}.
+@item G R
+@kindex G R (Group)
+@findex gnus-group-make-rss-group
+Make a group based on an @acronym{RSS} feed
+(@code{gnus-group-make-rss-group}). You will be prompted for an URL.
+@xref{RSS}.
+
@item G DEL
@kindex G DEL (Group)
@findex gnus-group-delete-group
actually delete all the articles in the group, and forcibly remove the
group itself from the face of the Earth. Use a prefix only if you are
absolutely sure of what you are doing. This command can't be used on
-read-only groups (like @code{nntp} group), though.
+read-only groups (like @code{nntp} groups), though.
@item G V
@kindex G V (Group)
If @code{gnus-activate-foreign-newsgroups} is a positive number,
Gnus will check all foreign groups with this level or lower at startup.
This might take quite a while, especially if you subscribe to lots of
-groups from different @sc{nntp} servers. Also @pxref{Group Levels};
+groups from different @acronym{NNTP} servers. Also @pxref{Group Levels};
@code{gnus-activate-level} also affects activation of foreign
newsgroups.
parameters have this form @emph{except} local variable specs, which are
not dotted pairs, but proper lists.
-Some parameters have correspondant customizable variables, each of which
+Some parameters have correspondent customizable variables, each of which
is an alist of regexps and values.
The following group parameters can be used:
sending the message if @code{gnus-add-to-list} is set to @code{t}.
@vindex gnus-add-to-list
-If you do an @kbd{a} command in a mail group and you don't have a
-@code{to-list} group parameter, one will be added automatically upon
-sending the message.
-
@findex gnus-mailing-list-mode
-@cindex Mail List Groups
+@cindex mail list groups
If this variable is set, @code{gnus-mailing-list-mode} is turned on when
entering summary buffer.
@anchor{subscribed}
@item subscribed
@cindex subscribed
+@cindex Mail-Followup-To
+@findex gnus-find-subscribed-addresses
If this parameter is set to @code{t}, Gnus will consider the
to-address and to-list parameters for this group as addresses of
mailing lists you are subscribed to. Giving Gnus this information is
(only) a first step in getting it to generate correct Mail-Followup-To
-headers for your posts to these lists. Look here @pxref{Mailing
-Lists, , Mailing Lists, message, The Message Manual} for a complete
-treatment of available MFT support.
+headers for your posts to these lists. The second step is to put the
+following in your @file{.gnus.el}
+
+@lisp
+(setq message-subscribed-address-functions
+ '(gnus-find-subscribed-addresses))
+@end lisp
-See also @code{gnus-find-subscribed-addresses}, the function that
-directly uses this group parameter.
+@xref{Mailing Lists, ,Mailing Lists, message, The Message Manual}, for
+a complete treatment of available MFT support.
@item visible
@cindex visible
@item broken-reply-to
@cindex broken-reply-to
Elements like @code{(broken-reply-to . t)} signals that @code{Reply-To}
-headers in this group are to be ignored. This can be useful if you're
-reading a mailing list group where the listserv has inserted
-@code{Reply-To} headers that point back to the listserv itself. This is
-broken behavior. So there!
+headers in this group are to be ignored, and for the header to be hidden
+if @code{reply-to} is part of @code{gnus-boring-article-headers}. This
+can be useful if you're reading a mailing list group where the listserv
+has inserted @code{Reply-To} headers that point back to the listserv
+itself. That is broken behavior. So there!
@item to-group
@cindex to-group
generated, if @code{(gcc-self . "string")} is present, this string will
be inserted literally as a @code{gcc} header. This parameter takes
precedence over any default @code{Gcc} rules as described later
-(@pxref{Archived Messages}). CAVEAT:: It yields an error putting
-@code{(gcc-self . t)} in groups of a @code{nntp} server or so, because
-a @code{nntp} server doesn't accept articles.
+(@pxref{Archived Messages}).
+
+@strong{Caveat}: Adding @code{(gcc-self . t)} to the parameter list of
+@code{nntp} groups (or the like) isn't valid. An @code{nntp} server
+doesn't accept articles.
@item auto-expire
@cindex auto-expire
can either be a number of days (not necessarily an integer) or the
symbols @code{never} or @code{immediate}.
+@item expiry-target
+@cindex expiry-target
+Where expired messages end up. This parameter overrides
+@code{nnmail-expiry-target}.
+
@item score-file
@cindex score file group parameter
Elements that look like @code{(score-file . "file")} will make
@item an integer
Display the last @var{integer} articles in the group. This is the same as
-entering the group with C-u @var{integer}.
+entering the group with @kbd{C-u @var{integer}}.
@item default
Display the default visible articles, which normally includes unread and
@item banner
@cindex banner
-An item like @code{(banner . "regex")} causes any part of an article
-that matches the regular expression "regex" to be stripped. Instead of
-"regex", you can also use the symbol @code{signature} which strips the
+An item like @code{(banner . @var{regexp})} causes any part of an article
+that matches the regular expression @var{regexp} to be stripped. Instead of
+@var{regexp}, you can also use the symbol @code{signature} which strips the
last signature or any of the elements of the alist
@code{gnus-article-banner-alist}.
Sieve @samp{IF} control structure is generated, having the test as the
condition and @samp{fileinto "group.name";} as the body.
-For example, if the INBOX.list.sieve group has the @code{(sieve
+For example, if the @samp{INBOX.list.sieve} group has the @code{(sieve
address "sender" "sieve-admin@@extundo.com")} group parameter, when
translating the group parameter into a Sieve script (@pxref{Sieve
Commands}) the following Sieve code is generated:
@}
@end example
-The Sieve language is described in RFC 3028. @xref{Top, , Top, sieve,
-Emacs Sieve}.
+The Sieve language is described in RFC 3028. @xref{Top, Emacs Sieve,
+Top, sieve, Emacs Sieve}.
+
+@item (agent parameters)
+If the agent has been enabled, you can set any of the its parameters
+to control the behavior of the agent in individual groups. See Agent
+Parameters in @ref{Category Syntax}. Most users will choose to set
+agent parameters in either an agent category or group topic to
+minimize the configuration effort.
@item (@var{variable} @var{form})
You can use the group parameters to set variables local to the group you
in the summary buffer you enter, and the form @code{nil} will be
@code{eval}ed there.
+Note that this feature sets the variable locally to the summary buffer.
+But some variables are evaluated in the article buffer, or in the
+message buffer (of a reply or followup or otherwise newly created
+message). As a workaround, it might help to add the variable in
+question to @code{gnus-newsgroup-variables}. @xref{Various Summary
+Stuff}. So if you want to set @code{message-from-style} via the group
+parameters, then you may need the following statement elsewhere in your
+@file{~/.gnus} file:
+
+@lisp
+(add-to-list 'gnus-newsgroup-variables 'message-from-style)
+@end lisp
+
@vindex gnus-list-identifiers
-A use for this feature, is to remove a mailing list identifier tag in
-the subject fields of articles. E.g. if the news group
-@samp{nntp+news.gnus.org:gmane.text.docbook.apps} has the tag
-@samp{DOC-BOOK-APPS:} in the subject of all articles, this tag can be
-removed from the article subjects in the summary buffer for the group by
-putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")} into the group
-parameters for the group.
+A use for this feature is to remove a mailing list identifier tag in
+the subject fields of articles. E.g. if the news group
+
+@example
+nntp+news.gnus.org:gmane.text.docbook.apps
+@end example
+has the tag @samp{DOC-BOOK-APPS:} in the subject of all articles, this
+tag can be removed from the article subjects in the summary buffer for
+the group by putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")}
+into the group parameters for the group.
This can also be used as a group-specific hook function, if you'd like.
If you want to hear a beep when you enter a group, you could put
List all groups that have unread articles
(@code{gnus-group-list-groups}). If the numeric prefix is used, this
command will list only groups of level ARG and lower. By default, it
-only lists groups of level five (i. e.,
+only lists groups of level five (i.e.,
@code{gnus-group-default-list-level}) or lower (i.e., just subscribed
groups).
@item G S m
@kindex G S m (Group)
@findex gnus-group-sort-groups-by-method
-Sort the group buffer alphabetically by back end name
+Sort the group buffer alphabetically by back end name@*
(@code{gnus-group-sort-groups-by-method}).
@item G S n
@item G P m
@kindex G P m (Group)
@findex gnus-group-sort-selected-groups-by-method
-Sort the groups alphabetically by back end name
+Sort the groups alphabetically by back end name@*
(@code{gnus-group-sort-selected-groups-by-method}).
@item G P n
If you want this permanently enabled, you should add that minor mode to
the hook for the group mode. Put the following line in your
-@file{~/.gnus} file:
+@file{~/.gnus.el} file:
@lisp
(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
before all groups.
So, to move a topic to the beginning of the list of topics, just hit
-@kbd{C-k} on it. This is like the `cut' part of cut and paste. Then,
-move the cursor to the beginning of the buffer (just below the `Gnus'
-topic) and hit @kbd{C-y}. This is like the `paste' part of cut and
+@kbd{C-k} on it. This is like the ``cut'' part of cut and paste. Then,
+move the cursor to the beginning of the buffer (just below the ``Gnus''
+topic) and hit @kbd{C-y}. This is like the ``paste'' part of cut and
paste. Like I said -- E-Z.
You can use @kbd{C-k} and @kbd{C-y} on groups as well as on topics. So
@findex gnus-topic-expire-articles
Run all expirable articles in the current group or topic through the
expiry process (if any)
-(@code{gnus-topic-expire-articles}). (@pxref{Expiring Mail}).
+(@code{gnus-topic-expire-articles}). (@pxref{Expiring Mail}).
@item T r
@kindex T r (Topic)
(@code{gnus-topic-sort-groups-by-server}).
@item T S s
-@kindex T S s
+@kindex T S s (Topic)
@findex gnus-topic-sort-groups
Sort the current topic according to the function(s) given by the
@code{gnus-group-sort-function} variable
So, let's have a look at an example group buffer:
@example
+@group
Gnus
Emacs -- I wuw it!
3: comp.emacs
Misc
8: comp.binaries.fractals
13: comp.sources.unix
+@end group
@end example
So, here we have one top-level topic (@samp{Gnus}), two topics under
@subsection Topic Parameters
@cindex topic parameters
-All groups in a topic will inherit group parameters from the parent (and
-ancestor) topic parameters. All valid group parameters are valid topic
-parameters (@pxref{Group Parameters}).
+All groups in a topic will inherit group parameters from the parent
+(and ancestor) topic parameters. All valid group parameters are valid
+topic parameters (@pxref{Group Parameters}). When the agent is
+enabled, all agent parameters (See Agent Parameters in @ref{Category
+Syntax}) are also valid topic parameters.
In addition, the following parameters are only valid as topic
parameters:
verb, although you may feel free to disagree with me here.)
@example
+@group
Gnus
Emacs
3: comp.emacs
8: comp.binaries.fractals
13: comp.sources.unix
452: alt.sex.emacs
+@end group
@end example
The @samp{Emacs} topic has the topic parameter @code{(score-file
@item gnus-group-name-charset-method-alist
@vindex gnus-group-name-charset-method-alist
-An alist of method and the charset for group names. It is used to show
-non-ASCII group names.
+An alist of method and the charset for group names. It is used to show
+non-@acronym{ASCII} group names.
For example:
@lisp
@cindex UTF-8 group names
@vindex gnus-group-name-charset-group-alist
An alist of regexp of group name and the charset for group names. It
-is used to show non-ASCII group names. @code{((".*" utf-8))} is the
-default value if UTF-8 is supported, otherwise the default is
-@code{nil}.
+is used to show non-@acronym{ASCII} group names. @code{((".*"
+utf-8))} is the default value if UTF-8 is supported, otherwise the
+default is @code{nil}.
For example:
@lisp
@vindex gnus-group-faq-directory
@cindex FAQ
@cindex ange-ftp
-Try to fetch the FAQ for the current group
-(@code{gnus-group-fetch-faq}). Gnus will try to get the FAQ from
-@code{gnus-group-faq-directory}, which is usually a directory on a
-remote machine. This variable can also be a list of directories. In
-that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} (or @code{efs}) will be used
-for fetching the file.
+Try to fetch the @acronym{FAQ} for the current group
+(@code{gnus-group-fetch-faq}). Gnus will try to get the @acronym{FAQ}
+from @code{gnus-group-faq-directory}, which is usually a directory on
+a remote machine. This variable can also be a list of directories.
+In that case, giving a prefix to this command will allow you to choose
+between the various sites. @code{ange-ftp} (or @code{efs}) will be
+used for fetching the file.
If fetching from the first site is unsuccessful, Gnus will attempt to go
through @code{gnus-group-faq-directory} and try to open them one by one.
@vindex gnus-group-fetch-control-use-browse-url
@cindex control message
Fetch the control messages for the group from the archive at
-@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
+@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
group if given a prefix argument.
If @code{gnus-group-fetch-control-use-browse-url} is non-@code{nil},
@vindex gnus-init-file
@cindex reading init file
Re-read the init file (@code{gnus-init-file}, which defaults to
-@file{~/.gnus}) (@code{gnus-group-read-init-file}).
+@file{~/.gnus.el}) (@code{gnus-group-read-init-file}).
@item s
@kindex s (Group)
is only placed in the group with the first matching rule. For
example, the group parameter @samp{(sieve address "sender"
"owner-ding@@hpc.uh.edu")} will generate the following piece of Sieve
-code if @code{gnus-sieve-crosspost} is @code{nil}. (When
+code if @code{gnus-sieve-crosspost} is @code{nil}. (When
@code{gnus-sieve-crosspost} is non-@code{nil}, it looks the same
except that the line containing the call to @code{stop} is removed.)
@}
@end example
-@xref{Top, ,Top, sieve, Emacs Sieve}.
+@xref{Top, Emacs Sieve, Top, sieve, Emacs Sieve}.
@table @kbd
@item L
Number of lines in the article.
@item c
-Number of characters in the article. This specifier is not supported
+Number of characters in the article. This specifier is not supported
in some methods (like nnfolder).
@item k
Pretty-printed version of the number of characters in the article;
You can customize the appearance with the following options. Note
that it is possible to make the thread display look really neat by
-replacing the default ASCII characters with graphic line-drawing
-glyphs.
+replacing the default @acronym{ASCII} characters with graphic
+line-drawing glyphs.
@table @code
@item gnus-sum-thread-tree-root
@vindex gnus-sum-thread-tree-root
Used for the root of a thread. If @code{nil}, use subject
-instead. The default is @samp{> }.
+instead. The default is @samp{> }.
+
+@item gnus-sum-thread-tree-false-root
+@vindex gnus-sum-thread-tree-false-root
+Used for the false root of a thread (@pxref{Loose Threads}). If
+@code{nil}, use subject instead. The default is @samp{> }.
@item gnus-sum-thread-tree-single-indent
@vindex gnus-sum-thread-tree-single-indent
@item gnus-sum-thread-tree-indent
@vindex gnus-sum-thread-tree-indent
-Used for indenting. The default is @samp{ }.
+Used for indenting. The default is @samp{ }.
@item gnus-sum-thread-tree-leaf-with-other
@vindex gnus-sum-thread-tree-leaf-with-other
@item <
Twenty minus thread level spaces.
@item U
-Unread. @xref{Read Articles}.
+Unread. @xref{Read Articles}.
@item R
This misleadingly named specifier is the @dfn{secondary mark}. This
@item u
User defined specifier. The next character in the format string should
be a letter. Gnus will call the function
-@code{gnus-user-format-function-}@samp{X}, where @samp{X} is the letter
+@code{gnus-user-format-function-@var{x}}, where @var{x} is the letter
following @samp{%u}. The function will be passed the current header as
argument. The function should return a string, which will be inserted
into the summary just like information from any other summary specifier.
@vindex nnmail-extra-headers
A related variable is @code{nnmail-extra-headers}, which controls when
-to include extra headers when generating overview (@sc{nov}) files.
+to include extra headers when generating overview (@acronym{NOV}) files.
If you have old overview files, you should regenerate them after
changing this variable, by entering the server buffer using @kbd{^},
and then @kbd{g} on the appropriate mail server (e.g. nnml) to cause
@code{gnus-summary-line-format} variable.
In summary, you'd typically put something like the following in
-@file{~/.gnus}:
+@file{~/.gnus.el}:
@lisp
(setq gnus-extra-headers
support:
The above is mostly useful for mail groups, where you have control over
-the @sc{nov} files that are created. However, if you can persuade your
+the @acronym{NOV} files that are created. However, if you can persuade your
nntp admin to add (in the usual implementation, notably INN):
@example
If you have an article window open already and you press @kbd{SPACE}
again, the article will be scrolled. This lets you conveniently
-@kbd{SPACE} through an entire newsgroup. @pxref{Paging the Article}.
+@kbd{SPACE} through an entire newsgroup. @xref{Paging the Article}.
@item G n
@itemx n
@item gnus-select-article-hook
@vindex gnus-select-article-hook
This hook is called whenever an article is selected. By default it
-exposes any threads hidden under the selected article. If you would
+exposes any threads hidden under the selected article. If you would
like each article to be saved in the Agent as you read it, putting
@code{gnus-agent-fetch-selected-article} on this hook will do so.
* Summary Mail Commands:: Sending mail.
* Summary Post Commands:: Sending news.
* Summary Message Commands:: Other Message-related commands.
-* Canceling and Superseding::
+* Canceling and Superseding::
@end menu
Mail a wide reply to the author of the current article
(@code{gnus-summary-wide-reply}). A @dfn{wide reply} is a reply that
goes out to all people listed in the @code{To}, @code{From} (or
-@code{Reply-to}) and @code{Cc} headers.
+@code{Reply-to}) and @code{Cc} headers. If @code{Mail-Followup-To} is
+present, that's used instead.
@item S W
@kindex S W (Summary)
@findex gnus-summary-reply-broken-reply-to
Mail a reply to the author of the current article but ignore the
@code{Reply-To} field (@code{gnus-summary-reply-broken-reply-to}).
+If you need this because a mailing list incorrectly sets a
+@code{Reply-To} header pointing to the list, you probably want to set
+the @code{broken-reply-to} group parameter instead, so things will work
+correctly. @xref{Group Parameters}.
@item S B R
@kindex S B R (Summary)
is forwarded according to the value of (@code{message-forward-as-mime})
and (@code{message-forward-show-mml}); if the prefix is 1, decode the
message and forward directly inline; if the prefix is 2, forward message
-as an rfc822 @sc{mime} section; if the prefix is 3, decode message and
-forward as an rfc822 @sc{mime} section; if the prefix is 4, forward message
+as an rfc822 @acronym{MIME} section; if the prefix is 3, decode message and
+forward as an rfc822 @acronym{MIME} section; if the prefix is 4, forward message
directly inline; otherwise, the message is forwarded as no prefix given
but use the flipped value of (@code{message-forward-as-mime}). By
-default, the message is decoded and forwarded as an rfc822 @sc{mime}
+default, the message is decoded and forwarded as an rfc822 @acronym{MIME}
section.
@item S m
This command understands the process/prefix convention
(@pxref{Process/Prefix}).
+@item S D e
+@kindex S D e (Summary)
+@findex gnus-summary-resend-message-edit
+
+Like the previous command, but will allow you to edit the message as
+if it were a new message before resending.
+
@item S O m
@kindex S O m (Summary)
@findex gnus-uu-digest-mail-forward
@c @icon{gnus-summary-followup-with-original}
@findex gnus-summary-followup-with-original
Post a followup to the current article and include the original message
-(@code{gnus-summary-followup-with-original}). This command uses the
+(@code{gnus-summary-followup-with-original}). This command uses the
process/prefix convention.
@item S n
of (@code{message-forward-as-mime}) and
(@code{message-forward-show-mml}); if the prefix is 1, decode the
message and forward directly inline; if the prefix is 2, forward message
-as an rfc822 @sc{mime} section; if the prefix is 3, decode message and
-forward as an rfc822 @sc{mime} section; if the prefix is 4, forward message
+as an rfc822 @acronym{MIME} section; if the prefix is 3, decode message and
+forward as an rfc822 @acronym{MIME} section; if the prefix is 4, forward message
directly inline; otherwise, the message is forwarded as no prefix given
but use the flipped value of (@code{message-forward-as-mime}). By
-default, the message is decoded and forwarded as an rfc822 @sc{mime} section.
+default, the message is decoded and forwarded as an rfc822 @acronym{MIME} section.
@item S O p
@kindex S O p (Summary)
want to use the standard posting method, use the @samp{a} symbolic
prefix (@pxref{Symbolic Prefixes}).
+Gnus ensures that only you can cancel your own messages using a
+@code{Cancel-Lock} header (@pxref{Canceling News, Canceling News, ,
+message, Message Manual}).
+
If you discover that you have made some mistakes and want to do some
corrections, you can post a @dfn{superseding} article that will replace
your original article.
(months) and @code{Y} (years).
@item
-A specific date. Looks like @code{YYYYY-MM-DD}. The message will be
+A specific date. Looks like @code{YYYY-MM-DD}. The message will be
delayed until that day, at a specific time (eight o'clock by default).
See also @code{gnus-delay-default-hour}.
Articles that according to the server haven't been shown to the user
before are marked with a @samp{N} in the second column
(@code{gnus-recent-mark}). Note that not all servers support this
-mark, in which case it simply never appears. Compare with
+mark, in which case it simply never appears. Compare with
@code{gnus-unseen-mark}.
@item
@item
@vindex gnus-downloaded-mark
-When using the Gnus agent @pxref{Agent Basics}, articles may be
+When using the Gnus agent (@pxref{Agent Basics}), articles may be
downloaded for unplugged (offline) viewing. If you are using the
@samp{%O} spec, these articles get the @samp{+} mark in that spec.
(The variable @code{gnus-downloaded-mark} controls which character to
@item
@vindex gnus-undownloaded-mark
-When using the Gnus agent @pxref{Agent Basics}, some articles might
+When using the Gnus agent (@pxref{Agent Basics}), some articles might
not have been downloaded. Such articles cannot be viewed while you
are unplugged (offline). If you are using the @samp{%O} spec, these
articles get the @samp{-} mark in that spec. (The variable
@item
@vindex gnus-downloadable-mark
-The Gnus agent @pxref{Agent Basics} downloads some articles
+The Gnus agent (@pxref{Agent Basics}) downloads some articles
automatically, but it is also possible to explicitly mark articles for
download, even if they would not be downloaded automatically. Such
explicitly-marked articles get the @samp{%} mark in the first column.
article, you could say something like:
@lisp
+@group
(add-hook 'gnus-summary-mode-hook 'my-alter-summary-map)
(defun my-alter-summary-map ()
(local-set-key "!" 'gnus-summary-put-mark-as-ticked-next))
+@end group
@end lisp
+@noindent
or
@lisp
Mark articles in region (@code{gnus-uu-mark-region}).
@item M P g
-@kindex M P g
+@kindex M P g (Summary)
@findex gnus-uu-unmark-region
Unmark articles in region (@code{gnus-uu-unmark-region}).
@end table
-Also see the @kbd{&} command in @pxref{Searching for Articles} for how to
+Also see the @kbd{&} command in @ref{Searching for Articles}, for how to
set process marks based on article body contents.
@kindex / / (Summary)
@findex gnus-summary-limit-to-subject
Limit the summary buffer to articles that match some subject
-(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
+(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
matching articles.
@item / a
@kindex / a (Summary)
@findex gnus-summary-limit-to-author
Limit the summary buffer to articles that match some author
-(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
+(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
matching articles.
@item / x
@findex gnus-summary-limit-to-extra
Limit the summary buffer to articles that match one of the ``extra''
headers (@pxref{To From Newsgroups})
-(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
+(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
matching articles.
@item / u
@findex gnus-summary-limit-to-display-predicate
Limit the summary buffer to articles that satisfy the @code{display}
group parameter predicate
-(@code{gnus-summary-limit-to-display-predicate}). See @pxref{Group
-Parameters} for more on this predicate.
+(@code{gnus-summary-limit-to-display-predicate}). @xref{Group
+Parameters}, for more on this predicate.
+
+@item / r
+@kindex / r (Summary)
+@findex gnus-summary-limit-to-replied
+Limit the summary buffer to replied articles
+(@code{gnus-summary-limit-to-replied}). If given a prefix, exclude
+replied articles.
@item / E
@itemx M S
@item / c
@kindex / c (Summary)
@findex gnus-summary-limit-exclude-childless-dormant
-Exclude all dormant articles that have no children from the limit
+Exclude all dormant articles that have no children from the limit@*
(@code{gnus-summary-limit-exclude-childless-dormant}).
@item / C
@kindex / C (Summary)
@findex gnus-summary-limit-mark-excluded-as-read
Mark all excluded unread articles as read
-(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
+(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
also mark excluded ticked and dormant articles as read.
@item / N
@kindex / N (Summary)
@findex gnus-summary-insert-new-articles
-Insert all new articles in the summary buffer. It scans for new emails
+Insert all new articles in the summary buffer. It scans for new emails
if @var{back-end}@code{-get-new-mail} is non-@code{nil}.
@item / o
@kindex / o (Summary)
@findex gnus-summary-insert-old-articles
-Insert all old articles in the summary buffer. If given a numbered
+Insert all old articles in the summary buffer. If given a numbered
prefix, fetch this number of articles.
@end table
or simply missing. Weird news propagation exacerbates the problem,
so one has to employ other heuristics to get pleasing results. A
plethora of approaches exists, as detailed in horrible detail in
-@pxref{Customizing Threading}.
+@ref{Customizing Threading}.
First, a quick overview of the concepts:
@item gnus-fetch-old-headers
@vindex gnus-fetch-old-headers
If non-@code{nil}, Gnus will attempt to build old threads by fetching
-more old headers---headers to articles marked as read. If you
-would like to display as few summary lines as possible, but still
-connect as many loose threads as possible, you should set this variable
-to @code{some} or a number. If you set it to a number, no more than
-that number of extra old headers will be fetched. In either case,
-fetching old headers only works if the back end you are using carries
-overview files---this would normally be @code{nntp}, @code{nnspool},
+more old headers---headers to articles marked as read. If you would
+like to display as few summary lines as possible, but still connect as
+many loose threads as possible, you should set this variable to
+@code{some} or a number. If you set it to a number, no more than that
+number of extra old headers will be fetched. In either case, fetching
+old headers only works if the back end you are using carries overview
+files---this would normally be @code{nntp}, @code{nnspool},
@code{nnml}, and @code{nnmaildir}. Also remember that if the root of
-the thread has been expired by the server, there's not much Gnus can do
-about that.
+the thread has been expired by the server, there's not much Gnus can
+do about that.
This variable can also be set to @code{invisible}. This won't have any
visible effects, but is useful if you use the @kbd{A T} command a lot
(@pxref{Finding the Parent}).
+@item gnus-fetch-old-ephemeral-headers
+@vindex gnus-fetch-old-ephemeral-headers
+Same as @code{gnus-fetch-old-headers}, but only used for ephemeral
+newsgroups.
+
@item gnus-build-sparse-threads
@vindex gnus-build-sparse-threads
Fetching old headers can be slow. A low-rent similar effect can be
This can also be a predicate specifier (@pxref{Predicate Specifiers}).
Available predicates are @code{gnus-article-unread-p} and
-@code{gnus-article-unseen-p}).
+@code{gnus-article-unseen-p}.
Here's an example:
@item T s
@kindex T s (Summary)
@findex gnus-summary-show-thread
-Expose the (sub-)thread hidden under the current article, if any
+Expose the (sub-)thread hidden under the current article, if any@*
(@code{gnus-summary-show-thread}).
@item T h
@findex gnus-thread-sort-by-number
@findex gnus-thread-sort-by-random
@vindex gnus-thread-sort-functions
-@findex gnus-thread-sort-by-most-recent-thread
+@findex gnus-thread-sort-by-most-recent-number
+@findex gnus-thread-sort-by-most-recent-date
If you are using a threaded summary display, you can sort the threads by
setting @code{gnus-thread-sort-functions}, which can be either a single
function, a list of functions, or a list containing functions and
@cindex article pre-fetch
@cindex pre-fetch
-If you read your news from an @sc{nntp} server that's far away, the
+If you read your news from an @acronym{NNTP} server that's far away, the
network latencies may make reading articles a chore. You have to wait
for a while after pressing @kbd{n} to go to the next article before the
article appears. Why can't Gnus just go ahead and fetch the article
extra connection takes some time, so Gnus startup will be slower.
Gnus will fetch more articles than you will read. This will mean that
-the link between your machine and the @sc{nntp} server will become more
+the link between your machine and the @acronym{NNTP} server will become more
loaded than if you didn't use article pre-fetch. The server itself will
also become more loaded---both with the extra article requests, and the
extra connection.
@cindex article caching
@cindex caching
-If you have an @emph{extremely} slow @sc{nntp} connection, you may
+If you have an @emph{extremely} slow @acronym{NNTP} connection, you may
consider turning article caching on. Each article will then be stored
locally under your home directory. As you may surmise, this could
potentially use @emph{huge} amounts of disk space, as well as eat up all
picture? The @code{gnus-jog-cache} command will go through all
subscribed newsgroups, request all unread articles, score them, and
store them in the cache. You should only ever, ever ever ever, use this
-command if 1) your connection to the @sc{nntp} server is really, really,
+command if 1) your connection to the @acronym{NNTP} server is really, really,
really slow and 2) you have a really, really, really huge disk.
Seriously. One way to cut down on the number of articles downloaded is
to score unwanted articles down and have them marked as read. They will
file (@code{gnus-cache-active-file}). If this file (or any other parts
of the cache) becomes all messed up for some reason or other, Gnus
offers two functions that will try to set things right. @kbd{M-x
-gnus-cache-generate-nov-databases} will (re)build all the @sc{nov}
+gnus-cache-generate-nov-databases} will (re)build all the @acronym{NOV}
files, and @kbd{gnus-cache-generate-active} will (re)generate the active
file.
@findex gnus-cache-move-cache
@code{gnus-cache-move-cache} will move your whole
-@code{gnus-cache-directory} to some other location. You get asked to
+@code{gnus-cache-directory} to some other location. You get asked to
where, isn't that cool?
@node Persistent Articles
@item O r
@kindex O r (Summary)
@findex gnus-summary-save-article-rmail
-Save the current article in rmail format
+Save the current article in Rmail format
(@code{gnus-summary-save-article-rmail}).
@item O f
@kindex O P (Summary)
@findex gnus-summary-muttprint
@vindex gnus-summary-muttprint-program
-Save the current article into muttprint. That is, print it using the
-external program Muttprint (see
-@uref{http://muttprint.sourceforge.net/}). The program name and
-options to use is controlled by the variable
-@code{gnus-summary-muttprint-program}. (@code{gnus-summary-muttprint}).
+Save the current article into muttprint. That is, print it using the
+external program @uref{http://muttprint.sourceforge.net/,
+Muttprint}. The program name and options to use is controlled by the
+variable @code{gnus-summary-muttprint-program}.
+(@code{gnus-summary-muttprint}).
@end table
@findex gnus-summary-save-in-rmail
@vindex gnus-rmail-save-name
@findex gnus-plain-save-name
-This is the default format, @dfn{babyl}. Uses the function in the
+This is the default format, @dfn{Babyl}. Uses the function in the
@code{gnus-rmail-save-name} variable to get a file name to save the
article in. The default is @code{gnus-plain-save-name}.
@vindex gnus-article-save-directory
All of these functions, except for the last one, will save the article
in the @code{gnus-article-save-directory}, which is initialized from the
-@code{SAVEDIR} environment variable. This is @file{~/News/} by
+@env{SAVEDIR} environment variable. This is @file{~/News/} by
default.
As you can see above, the functions use different functions to find a
a spool, you could
@lisp
-(setq gnus-use-long-file-name '(not-save)) ; to get a hierarchy
+(setq gnus-use-long-file-name '(not-save)) ; @r{to get a hierarchy}
(setq gnus-default-article-saver
- 'gnus-summary-save-in-file) ; no encoding
+ 'gnus-summary-save-in-file) ; @r{no encoding}
@end lisp
Then just save with @kbd{o}. You'd then read this hierarchy with
@item gnus-uu-ignore-files-by-type
@vindex gnus-uu-ignore-files-by-type
-Files with a @sc{mime} type matching this variable won't be viewed.
+Files with a @acronym{MIME} type matching this variable won't be viewed.
Note that Gnus tries to guess what type the file is based on the name.
-@code{gnus-uu} is not a @sc{mime} package (yet), so this is slightly
+@code{gnus-uu} is not a @acronym{MIME} package (yet), so this is slightly
kludgey.
@item gnus-uu-tmp-dir
@vindex gnus-uu-view-with-metamail
@cindex metamail
Non-@code{nil} means that @code{gnus-uu} will ignore the viewing
-commands defined by the rule variables and just fudge a @sc{mime}
+commands defined by the rule variables and just fudge a @acronym{MIME}
content type based on the file name. The result will be fed to
@code{metamail} for viewing.
* Article Date:: Grumble, UT!
* Article Display:: Display various stuff---X-Face, Picons, Smileys
* Article Signature:: What is a signature?
-* Article Miscellania:: Various other stuff.
+* Article Miscellanea:: Various other stuff.
@end menu
@findex gnus-article-hide
Do quite a lot of hiding on the article buffer
(@kbd{gnus-article-hide}). In particular, this function will hide
-headers, PGP, cited text and the signature.
+headers, @acronym{PGP}, cited text and the signature.
@item W W h
@kindex W W h (Summary)
Strip list identifiers specified in @code{gnus-list-identifiers}. These
are strings some mailing list servers add to the beginning of all
@code{Subject} headers---for example, @samp{[zebra 4711]}. Any leading
-@samp{Re: } is skipped before stripping. @code{gnus-list-identifiers}
+@samp{Re: } is skipped before stripping. @code{gnus-list-identifiers}
may not contain @code{\\(..\\)}.
@table @code
@item W W P
@kindex W W P (Summary)
@findex gnus-article-hide-pem
-Hide @sc{pem} (privacy enhanced messages) cruft
+Hide @acronym{PEM} (privacy enhanced messages) cruft
(@code{gnus-article-hide-pem}).
@item W W B
sends, you can use the following element to remove them:
@lisp
-("@@yoo-hoo\\.co\\.jp\\'" . "\n_+\nDo You Yoo-hoo!\\?\n.*\n.*\n")
+("@@yoo-hoo\\.co\\.jp\\'" .
+ "\n_+\nDo You Yoo-hoo!\\?\n.*\n.*\n")
@end lisp
@end table
@item gnus-cited-lines-visible
@vindex gnus-cited-lines-visible
The number of lines at the beginning of the cited text to leave
-shown. This can also be a cons cell with the number of lines at the top
+shown. This can also be a cons cell with the number of lines at the top
and bottom of the text, respectively, to remain visible.
@end table
Unwrap lines that appear to be wrapped citation lines. You can control
what lines will be unwrapped by frobbing
@code{gnus-outlook-deuglify-unwrap-min} and
-@code{gnus-outlook-deuglify-unwrap-max}, indicating the miminum and
+@code{gnus-outlook-deuglify-unwrap-max}, indicating the minimum and
maximum length of an unwrapped citation line.
(@code{gnus-article-outlook-unwrap-lines}).
@item W Y a
@kindex W Y a (Summary)
@findex gnus-article-outlook-repair-attribution
-Repair a broken attribution line.
+Repair a broken attribution line.@*
(@code{gnus-article-outlook-repair-attribution}).
@item W Y c
@kindex W q (Summary)
@findex gnus-article-de-quoted-unreadable
Treat quoted-printable (@code{gnus-article-de-quoted-unreadable}).
-Quoted-Printable is one common @sc{mime} encoding employed when sending
-non-ASCII (i. e., 8-bit) articles. It typically makes strings like
-@samp{déjà vu} look like @samp{d=E9j=E0 vu}, which doesn't look very
-readable to me. Note that this is usually done automatically by
-Gnus if the message in question has a @code{Content-Transfer-Encoding}
-header that says that this encoding has been done.
-If a prefix is given, a charset will be asked for.
+Quoted-Printable is one common @acronym{MIME} encoding employed when
+sending non-@acronym{ASCII} (i.e., 8-bit) articles. It typically
+makes strings like @samp{d@'ej@`a vu} look like @samp{d=E9j=E0 vu},
+which doesn't look very readable to me. Note that this is usually
+done automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding
+has been done. If a prefix is given, a charset will be asked for.
@item W 6
@kindex W 6 (Summary)
@findex gnus-article-de-base64-unreadable
-Treat base64 (@code{gnus-article-de-base64-unreadable}).
-Base64 is one common @sc{mime} encoding employed when sending non-ASCII
-(i. e., 8-bit) articles. Note that this is usually done
-automatically by Gnus if the message in question has a
-@code{Content-Transfer-Encoding} header that says that this encoding has
-been done.
-If a prefix is given, a charset will be asked for.
+Treat base64 (@code{gnus-article-de-base64-unreadable}). Base64 is
+one common @acronym{MIME} encoding employed when sending
+non-@acronym{ASCII} (i.e., 8-bit) articles. Note that this is
+usually done automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding
+has been done. If a prefix is given, a charset will be asked for.
@item W Z
@kindex W Z (Summary)
common encoding employed when sending Chinese articles. It typically
makes strings look like @samp{~@{<:Ky2;S@{#,NpJ)l6HK!#~@}}.
+@item W A
+@kindex W A (Summary)
+@findex gnus-article-treat-ansi-sequences
+@cindex @acronym{ANSI} control sequences
+Translate @acronym{ANSI} SGR control sequences into overlays or
+extents (@code{gnus-article-treat-ansi-sequences}). @acronym{ANSI}
+sequences are used in some Chinese hierarchies for highlighting.
+
@item W u
@kindex W u (Summary)
@findex gnus-article-unsplit-urls
@item W h
@kindex W h (Summary)
@findex gnus-article-wash-html
-Treat @sc{html} (@code{gnus-article-wash-html}). Note that this is
+Treat @acronym{HTML} (@code{gnus-article-wash-html}). Note that this is
usually done automatically by Gnus if the message in question has a
-@code{Content-Type} header that says that the message is @sc{html}.
+@code{Content-Type} header that says that the message is @acronym{HTML}.
If a prefix is given, a charset will be asked for.
The default is to use the function specified by
@code{mm-text-html-renderer} (@pxref{Display Customization, ,Display
Customization, emacs-mime, The Emacs MIME Manual}) to convert the
-@sc{html}, but this is controlled by the
+@acronym{HTML}, but this is controlled by the
@code{gnus-article-wash-function} variable. Pre-defined functions you
can use include:
Use Emacs/w3.
@item w3m
-Use emacs-w3m (see @uref{http://emacs-w3m.namazu.org/} for more
-information).
+Use @uref{http://emacs-w3m.namazu.org/, emacs-w3m}.
@item links
-Use Links (see @uref{http://artax.karlin.mff.cuni.cz/~mikulas/links/}).
+Use @uref{http://links.sf.net/, Links}.
@item lynx
-Use Lynx (see @uref{http://lynx.browser.org/}).
+Use @uref{http://lynx.isc.org/, Lynx}.
@item html2text
-Use html2text -- a simple @sc{html} converter included with Gnus.
+Use html2text---a simple @acronym{HTML} converter included with Gnus.
@end table
@item W p
@kindex W p (Summary)
@findex gnus-article-verify-x-pgp-sig
-Verify a signed control message (@code{gnus-article-verify-x-pgp-sig}).
-Control messages such as @code{newgroup} and @code{checkgroups} are
-usually signed by the hierarchy maintainer. You need to add the PGP
-public key of the maintainer to your keyring to verify the
-message.@footnote{PGP keys for many hierarchies are available at
-@uref{ftp://ftp.isc.org/pub/pgpcontrol/README.html}}
+Verify a signed control message
+(@code{gnus-article-verify-x-pgp-sig}). Control messages such as
+@code{newgroup} and @code{checkgroups} are usually signed by the
+hierarchy maintainer. You need to add the @acronym{PGP} public key of
+the maintainer to your keyring to verify the
+message.@footnote{@acronym{PGP} keys for many hierarchies are
+available at @uref{ftp://ftp.isc.org/pub/pgpcontrol/README.html}}
@item W s
@kindex W s (Summary)
@findex gnus-summary-force-verify-and-decrypt
-Verify a signed (PGP, @sc{pgp/mime} or @sc{s/mime}) message
+Verify a signed (@acronym{PGP}, @acronym{PGP/MIME} or
+@acronym{S/MIME}) message
(@code{gnus-summary-force-verify-and-decrypt}). @xref{Security}.
@item W a
(@code{gnus-article-treat-fold-headers}).
@item W E w
-@kindex W E w
+@kindex W E w (Summary)
@findex gnus-article-remove-leading-whitespace
Remove excessive whitespace from all headers
(@code{gnus-article-remove-leading-whitespace}).
This is an alist where each entry has this form:
@lisp
-(REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
+(@var{regexp} @var{button-par} @var{use-p} @var{function} @var{data-par})
@end lisp
@table @var
used to say what headers to apply the buttonize coding to:
@lisp
-(HEADER REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
+(@var{header} @var{regexp} @var{button-par} @var{use-p} @var{function} @var{data-par})
@end lisp
@var{header} is a regular expression.
+@end table
-@subsubheading Related variables and functions
+@subsubsection Related variables and functions
+@table @code
@item gnus-button-@var{*}-level
@xref{Article Button Levels}.
@samp{foo123@@bar.invalid} is pushed. Strings like this can be either a
message ID or a mail address. If it is one of the symbols @code{mid} or
@code{mail}, Gnus will always assume that the string is a message ID or
-a mail address, respectivly. If this variable is set to the symbol
+a mail address, respectively. If this variable is set to the symbol
@code{ask}, always query the user what do do. If it is a function, this
-function will be called with the string as it's only argument. The
+function will be called with the string as its only argument. The
function must return @code{mid}, @code{mail}, @code{invalid} or
@code{ask}. The default value is the function
@code{gnus-button-mid-or-mail-heuristic}.
@item gnus-button-mid-or-mail-heuristic
@findex gnus-button-mid-or-mail-heuristic
-Function that guesses whether it's argument is a message ID or a mail
-address. Returns @code{mid} it's a message IDs, @code{mail} if it's a
-mail address, @code{ask} if unsure and @code{invalid} if the string is
-invalid.
+Function that guesses whether its argument is a message ID or a mail
+address. Returns @code{mid} if it's a message IDs, @code{mail} if
+it's a mail address, @code{ask} if unsure and @code{invalid} if the
+string is invalid.
@item gnus-button-mid-or-mail-heuristic-alist
@vindex gnus-button-mid-or-mail-heuristic-alist
variable @code{gnus-parameters}:
@lisp
-;; increase `gnus-button-*-level' in some groups:
+;; @r{increase @code{gnus-button-*-level} in some groups:}
(setq gnus-parameters
'(("\\<\\(emacs\\|gnus\\)\\>" (gnus-button-emacs-level 10))
("\\<unix\\>" (gnus-button-man-level 10))
@item gnus-button-tex-level
@vindex gnus-button-tex-level
-Controls the display of references to TeX or LaTeX stuff, e.g. for CTAN
+Controls the display of references to @TeX{} or LaTeX stuff, e.g. for CTAN
URLs. See the variables @code{gnus-ctan-url},
@code{gnus-button-ctan-handler},
@code{gnus-button-ctan-directory-regexp}, and
(gnus-start-date-timer)
@end lisp
-in your @file{.gnus.el} file, or you can run it off of some hook. If
+in your @file{~/.gnus.el} file, or you can run it off of some hook. If
you want to stop the timer, you can use the @code{gnus-stop-date-timer}
command.
@code{X-Face} headers are small black-and-white images supplied by the
message headers (@pxref{X-Face}).
-Picons, on the other hand, reside on your own system, and Gnus will
-try to match the headers to what you have (@pxref{Picons}).
+@code{Face} headers are small colored images supplied by the message
+headers (@pxref{Face}).
Smileys are those little @samp{:-)} symbols that people like to litter
their messages with (@pxref{Smileys}).
-All these functions are toggles--if the elements already exist,
+Picons, on the other hand, reside on your own system, and Gnus will
+try to match the headers to what you have (@pxref{Picons}).
+
+All these functions are toggles---if the elements already exist,
they'll be removed.
@table @kbd
@lisp
(setq gnus-signature-separator
- '("^-- $" ; The standard
- "^-- *$" ; A common mangling
- "^-------*$" ; Many people just use a looong
- ; line of dashes. Shame!
- "^ *--------*$" ; Double-shame!
- "^________*$" ; Underscores are also popular
- "^========*$")) ; Pervert!
+ '("^-- $" ; @r{The standard}
+ "^-- *$" ; @r{A common mangling}
+ "^-------*$" ; @r{Many people just use a looong}
+ ; @r{line of dashes. Shame!}
+ "^ *--------*$" ; @r{Double-shame!}
+ "^________*$" ; @r{Underscores are also popular}
+ "^========*$")) ; @r{Pervert!}
@end lisp
The more permissive you are, the more likely it is that you'll get false
signature after all.
-@node Article Miscellania
-@subsection Article Miscellania
+@node Article Miscellanea
+@subsection Article Miscellanea
@table @kbd
@item A t
@cindex viewing attachments
The following commands all understand the numerical prefix. For
-instance, @kbd{3 b} means ``view the third @sc{mime} part''.
+instance, @kbd{3 b} means ``view the third @acronym{MIME} part''.
@table @kbd
@item b
@itemx K v
@kindex b (Summary)
@kindex K v (Summary)
-View the @sc{mime} part.
+View the @acronym{MIME} part.
@item K o
@kindex K o (Summary)
-Save the @sc{mime} part.
+Save the @acronym{MIME} part.
@item K c
@kindex K c (Summary)
-Copy the @sc{mime} part.
+Copy the @acronym{MIME} part.
@item K e
@kindex K e (Summary)
-View the @sc{mime} part externally.
+View the @acronym{MIME} part externally.
@item K i
@kindex K i (Summary)
-View the @sc{mime} part internally.
+View the @acronym{MIME} part internally.
@item K |
@kindex K | (Summary)
-Pipe the @sc{mime} part to an external command.
+Pipe the @acronym{MIME} part to an external command.
@end table
-The rest of these @sc{mime} commands do not use the numerical prefix in
+The rest of these @acronym{MIME} commands do not use the numerical prefix in
the same manner:
@table @kbd
@item K b
@kindex K b (Summary)
-Make all the @sc{mime} parts have buttons in front of them. This is
+Make all the @acronym{MIME} parts have buttons in front of them. This is
mostly useful if you wish to save (or perform other actions) on inlined
parts.
@item X m
@kindex X m (Summary)
@findex gnus-summary-save-parts
-Save all parts matching a @sc{mime} type to a directory
+Save all parts matching a @acronym{MIME} type to a directory
(@code{gnus-summary-save-parts}). Understands the process/prefix
convention (@pxref{Process/Prefix}).
charset. If there is no such header in the article, you can give it a
prefix, which will prompt for the charset to decode as. In regional
groups where people post using some common encoding (but do not
-include @sc{mime} headers), you can set the @code{charset} group/topic
+include @acronym{MIME} headers), you can set the @code{charset} group/topic
parameter to the required charset (@pxref{Group Parameters}).
@item W M v
@kindex W M v (Summary)
@findex gnus-mime-view-all-parts
-View all the @sc{mime} parts in the current article
+View all the @acronym{MIME} parts in the current article
(@code{gnus-mime-view-all-parts}).
@end table
@table @code
@item gnus-ignored-mime-types
@vindex gnus-ignored-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
+This is a list of regexps. @acronym{MIME} types that match a regexp from
this list will be completely ignored by Gnus. The default value is
@code{nil}.
@item gnus-article-loose-mime
@vindex gnus-article-loose-mime
-If non-@code{nil}, Gnus won't required the @samp{MIME-Version} header
-before interpreting the message as a @sc{mime} message. This helps
+If non-@code{nil}, Gnus won't require the @samp{MIME-Version} header
+before interpreting the message as a @acronym{MIME} message. This helps
when reading messages from certain broken mail user agents. The
default is @code{nil}.
@item gnus-article-emulate-mime
@vindex gnus-article-emulate-mime
-There are other, non-@sc{mime} encoding methods used. The most common
+There are other, non-@acronym{MIME} encoding methods used. The most common
is @samp{uuencode}, but yEncode is also getting to be popular. If
-This variable is non-@code{nil}, Gnus will look in message bodies to
+this variable is non-@code{nil}, Gnus will look in message bodies to
see if it finds these encodings, and if so, it'll run them through the
-Gnus @sc{mime} machinery. The default is @code{t}.
+Gnus @acronym{MIME} machinery. The default is @code{t}.
@item gnus-unbuttonized-mime-types
@vindex gnus-unbuttonized-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
-this list won't have @sc{mime} buttons inserted unless they aren't
+This is a list of regexps. @acronym{MIME} types that match a regexp from
+this list won't have @acronym{MIME} buttons inserted unless they aren't
displayed or this variable is overridden by
@code{gnus-buttonized-mime-types}. The default value is
@code{(".*/.*")}. This variable is only used when
-@code{gnus-inhibit-mime-unbuttonizing} is nil.
+@code{gnus-inhibit-mime-unbuttonizing} is @code{nil}.
@item gnus-buttonized-mime-types
@vindex gnus-buttonized-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
-this list will have @sc{mime} buttons inserted unless they aren't
+This is a list of regexps. @acronym{MIME} types that match a regexp from
+this list will have @acronym{MIME} buttons inserted unless they aren't
displayed. This variable overrides
@code{gnus-unbuttonized-mime-types}. The default value is @code{nil}.
This variable is only used when @code{gnus-inhibit-mime-unbuttonizing}
-is nil.
+is @code{nil}.
To see e.g. security buttons but no other buttons, you could set this
variable to @code{("multipart/signed")} and leave
@item gnus-inhibit-mime-unbuttonizing
@vindex gnus-inhibit-mime-unbuttonizing
-If this is non-nil, then all @sc{mime} parts get buttons. The default
-value is @code{nil}.
+If this is non-@code{nil}, then all @acronym{MIME} parts get buttons. The
+default value is @code{nil}.
@item gnus-article-mime-part-function
@vindex gnus-article-mime-part-function
-For each @sc{mime} part, this function will be called with the @sc{mime}
+For each @acronym{MIME} part, this function will be called with the @acronym{MIME}
handle as the parameter. The function is meant to be used to allow
users to gather information from the article (e. g., add Vcard info to
the bbdb database) or to do actions based on parts (e. g., automatically
@vindex gnus-mime-multipart-functions
@item gnus-mime-multipart-functions
-Alist of @sc{mime} multipart types and functions to handle them.
+Alist of @acronym{MIME} multipart types and functions to handle them.
@vindex mm-file-name-rewrite-functions
@item mm-file-name-rewrite-functions
-List of functions used for rewriting file names of @sc{mime} parts.
+List of functions used for rewriting file names of @acronym{MIME} parts.
Each function takes a file name as input and returns a file name.
Ready-made functions include@*
@end lisp
@noindent
-to your @file{.gnus.el} file.
+to your @file{~/.gnus.el} file.
@end table
@section Charsets
@cindex charsets
-People use different charsets, and we have @sc{mime} to let us know what
+People use different charsets, and we have @acronym{MIME} to let us know what
charsets they use. Or rather, we wish we had. Many people use
-newsreaders and mailers that do not understand or use @sc{mime}, and
+newsreaders and mailers that do not understand or use @acronym{MIME}, and
just send out messages without saying what character sets they use. To
help a bit with this, some local news hierarchies have policies that say
what character set is the default. For instance, the @samp{fj}
group names) and default charsets to be used when reading these groups.
@vindex gnus-newsgroup-ignored-charsets
-In addition, some people do use soi-disant @sc{mime}-aware agents that
+In addition, some people do use soi-disant @acronym{MIME}-aware agents that
aren't. These blithely mark messages as being in @code{iso-8859-1}
even if they really are in @code{koi-8}. To help here, the
@code{gnus-newsgroup-ignored-charsets} variable can be used. The
@vindex gnus-group-posting-charset-alist
When posting, @code{gnus-group-posting-charset-alist} is used to
-determine which charsets should not be encoded using the @sc{mime}
+determine which charsets should not be encoded using the @acronym{MIME}
encodings. For instance, some hierarchies discourage using
quoted-printable header encoding.
Other charset tricks that may be useful, although not Gnus-specific:
-If there are several @sc{mime} charsets that encode the same Emacs
+If there are several @acronym{MIME} charsets that encode the same Emacs
charset, you can choose what charset to use by saying the following:
@lisp
@end lisp
This means that Russian will be encoded using @code{koi8-r} instead of
-the default @code{iso-8859-5} @sc{mime} charset.
+the default @code{iso-8859-5} @acronym{MIME} charset.
If you want to read messages in @code{koi8-u}, you can cheat and say
@findex gnus-summary-refer-parent-article
If you'd like to read the parent of the current article, and it is not
displayed in the summary buffer, you might still be able to. That is,
-if the current group is fetched by @sc{nntp}, the parent hasn't expired
+if the current group is fetched by @acronym{NNTP}, the parent hasn't expired
and the @code{References} in the current article are not mangled, you
can just press @kbd{^} or @kbd{A r}
(@code{gnus-summary-refer-parent-article}). If everything goes well,
@kindex M-^ (Summary)
@cindex Message-ID
@cindex fetching by Message-ID
-You can also ask the @sc{nntp} server for an arbitrary article, no
+You can also ask the @acronym{NNTP} server for an arbitrary article, no
matter what group it belongs to. @kbd{M-^}
(@code{gnus-summary-refer-article}) will ask you for a
@code{Message-ID}, which is one of those long, hard-to-read thingies
@vindex gnus-refer-article-method
If the group you are reading is located on a back end that does not
support fetching by @code{Message-ID} very well (like @code{nnspool}),
-you can set @code{gnus-refer-article-method} to an @sc{nntp} method. It
-would, perhaps, be best if the @sc{nntp} server you consult is the one
+you can set @code{gnus-refer-article-method} to an @acronym{NNTP} method. It
+would, perhaps, be best if the @acronym{NNTP} server you consult is the one
updating the spool you are reading from, but that's not really
necessary.
Most of the mail back ends support fetching by @code{Message-ID}, but
do not do a particularly excellent job at it. That is, @code{nnmbox},
-@code{nnbabyl}, and @code{nnmaildir} are able to locate articles from
-any groups, while @code{nnml}, @code{nnfolder}, and @code{nnimap} are
-only able to locate articles that have been posted to the current group.
-(Anything else would be too time consuming.) @code{nnmh} does not
-support this at all.
+@code{nnbabyl}, @code{nnmaildir}, @code{nnml}, are able to locate
+articles from any groups, while @code{nnfolder}, and @code{nnimap} are
+only able to locate articles that have been posted to the current
+group. (Anything else would be too time consuming.) @code{nnmh} does
+not support this at all.
@node Alternative Approaches
@item gnus-tree-brackets
@vindex gnus-tree-brackets
This is used for differentiating between ``real'' articles and
-``sparse'' articles. The format is @code{((@var{real-open} . @var{real-close})
-(@var{sparse-open} . @var{sparse-close}) (@var{dummy-open} . @var{dummy-close}))}, and the
-default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
+``sparse'' articles. The format is
+@example
+((@var{real-open} . @var{real-close})
+ (@var{sparse-open} . @var{sparse-close})
+ (@var{dummy-open} . @var{dummy-close}))
+@end example
+and the default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
@item gnus-tree-parent-child-edges
@vindex gnus-tree-parent-child-edges
Here's the same thread displayed in a vertical tree buffer:
@example
+@group
@{***@}
|--------------------------\-----\-----\
(***) [Bjo] [Gun] [Gun]
[Gun] [Eri] [Eri] [odd]
|
[Paa]
+@end group
@end example
If you're using horizontal trees, it might be nice to display the trees
side-by-side with the summary buffer. You could add something like the
-following to your @file{.gnus.el} file:
+following to your @file{~/.gnus.el} file:
@lisp
(setq gnus-use-trees t
@menu
* Summary Group Information:: Information oriented commands.
* Searching for Articles:: Multiple article commands.
-* Summary Generation Commands::
+* Summary Generation Commands::
* Really Various Summary Commands:: Those pesky non-conformant commands.
@end menu
If the value is an integer, @var{n}, update the display every @var{n}
lines. The default is @code{nil}.
+@vindex gnus-summary-display-arrow
+@item gnus-summary-display-arrow
+If non-@code{nil}, display an arrow in the fringe to indicate the
+current article.
+
@vindex gnus-summary-mode-hook
@item gnus-summary-mode-hook
This hook is called when creating a summary mode buffer.
@vindex gnus-newsgroup-variables
@item gnus-newsgroup-variables
A list of newsgroup (summary buffer) local variables, or cons of
-variables and their default values (when the default values are not
-nil), that should be made global while the summary buffer is active.
+variables and their default expressions to be evalled (when the default
+values are not @code{nil}), that should be made global while the summary
+buffer is active.
+
+Note: The default expressions will be evaluated (using function
+@code{eval}) before assignment to the local variable rather than just
+assigned to it. If the default expression is the symbol @code{global},
+that symbol will not be evaluated but the global value of the local
+variable will be used instead.
+
These variables can be used to set variables in the group parameters
while still allowing them to affect operations done in other
-buffers. For example:
+buffers. For example:
@lisp
(setq gnus-newsgroup-variables
- '(message-use-followup-to
- (gnus-visible-headers .
- "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^To:")))
+ '(message-use-followup-to
+ (gnus-visible-headers .
+ "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^To:")))
@end lisp
+Also @pxref{Group Parameters}.
@end table
@kindex H f (Summary)
@findex gnus-summary-fetch-faq
@vindex gnus-group-faq-directory
-Try to fetch the FAQ (list of frequently asked questions) for the
-current group (@code{gnus-summary-fetch-faq}). Gnus will try to get the
-FAQ from @code{gnus-group-faq-directory}, which is usually a directory
-on a remote machine. This variable can also be a list of directories.
-In that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} or @code{efs} will probably
-be used for fetching the file.
+Try to fetch the @acronym{FAQ} (list of frequently asked questions)
+for the current group (@code{gnus-summary-fetch-faq}). Gnus will try
+to get the @acronym{FAQ} from @code{gnus-group-faq-directory}, which
+is usually a directory on a remote machine. This variable can also be
+a list of directories. In that case, giving a prefix to this command
+will allow you to choose between the various sites. @code{ange-ftp}
+or @code{efs} will probably be used for fetching the file.
@item H d
@kindex H d (Summary)
string, the match is done on the entire article. If given a prefix,
search backward instead.
-For instance, @kbd{& RET some.*string #} will put the process mark on
+For instance, @kbd{& RET some.*string RET #} will put the process mark on
all articles that have heads or bodies that match @samp{some.*string}.
@item M-&
@table @kbd
@item Z Z
+@itemx Z Q
@itemx q
@kindex Z Z (Summary)
+@kindex Z Q (Summary)
@kindex q (Summary)
@findex gnus-summary-exit
@vindex gnus-summary-exit-hook
(@code{gnus-summary-catchup-and-goto-next-group}).
@item Z R
+@itemx C-x C-s
@kindex Z R (Summary)
+@kindex C-x C-s (Summary)
@findex gnus-summary-reselect-current-group
Exit this group, and then enter it again
(@code{gnus-summary-reselect-current-group}). If given a prefix, select
@cindex cross-posting
@cindex Xref
-@cindex @sc{nov}
+@cindex @acronym{NOV}
One thing that may cause Gnus to not do the cross-posting thing
-correctly is if you use an @sc{nntp} server that supports @sc{xover}
+correctly is if you use an @acronym{NNTP} server that supports @sc{xover}
(which is very nice, because it speeds things up considerably) which
-does not include the @code{Xref} header in its @sc{nov} lines. This is
+does not include the @code{Xref} header in its @acronym{NOV} lines. This is
Evil, but all too common, alas, alack. Gnus tries to Do The Right Thing
even with @sc{xover} by registering the @code{Xref} lines of all
articles you actually read, but if you kill the articles, or just mark
@cindex LIST overview.fmt
@cindex overview.fmt
-To check whether your @sc{nntp} server includes the @code{Xref} header
+To check whether your @acronym{NNTP} server includes the @code{Xref} header
in its overview files, try @samp{telnet your.nntp.server nntp},
@samp{MODE READER} on @code{inn} servers, and then say @samp{LIST
overview.fmt}. This may not work, but if it does, and the last line you
@enumerate
@item
-The @sc{nntp} server may fail to generate the @code{Xref} header. This
+The @acronym{NNTP} server may fail to generate the @code{Xref} header. This
is evil and not very common.
@item
-The @sc{nntp} server may fail to include the @code{Xref} header in the
+The @acronym{NNTP} server may fail to include the @code{Xref} header in the
@file{.overview} data bases. This is evil and all too common, alas.
@item
You may be reading the same group (or several related groups) from
-different @sc{nntp} servers.
+different @acronym{NNTP} servers.
@item
You may be getting mail that duplicates articles posted to groups.
@section Security
Gnus is able to verify signed messages or decrypt encrypted messages.
-The formats that are supported are PGP, @sc{pgp/mime} and @sc{s/mime},
-however you need some external programs to get things to work:
+The formats that are supported are @acronym{PGP}, @acronym{PGP/MIME}
+and @acronym{S/MIME}, however you need some external programs to get
+things to work:
@enumerate
@item
-To handle PGP and PGP/MIME messages, you have to install an OpenPGP
-implementation such as GnuPG. The lisp interface to GnuPG included
-with Gnus is called PGG (@pxref{Top, ,PGG, pgg, PGG Manual}), but
-Mailcrypt and gpg.el are also supported.
+To handle @acronym{PGP} and @acronym{PGP/MIME} messages, you have to
+install an OpenPGP implementation such as GnuPG. The Lisp interface
+to GnuPG included with Gnus is called PGG (@pxref{Top, ,PGG, pgg, PGG
+Manual}), but Mailcrypt and gpg.el are also supported.
@item
-To handle @sc{s/mime} message, you need to install OpenSSL. OpenSSL 0.9.6
+To handle @acronym{S/MIME} message, you need to install OpenSSL. OpenSSL 0.9.6
or newer is recommended.
@end enumerate
@vindex mm-verify-option
Option of verifying signed parts. @code{never}, not verify;
@code{always}, always verify; @code{known}, only verify known
-protocols. Otherwise, ask user.
+protocols. Otherwise, ask user.
@item mm-decrypt-option
@vindex mm-decrypt-option
Option of decrypting encrypted parts. @code{never}, no decryption;
@code{always}, always decrypt; @code{known}, only decrypt known
-protocols. Otherwise, ask user.
+protocols. Otherwise, ask user.
@item mml1991-use
@vindex mml1991-use
-Symbol indicating elisp interface to OpenPGP implementation for PGP
-messages. The default is @code{pgg}, but @code{mailcrypt} and
-@code{gpg} are also supported although deprecated.
+Symbol indicating elisp interface to OpenPGP implementation for
+@acronym{PGP} messages. The default is @code{pgg}, but
+@code{mailcrypt} and @code{gpg} are also supported although
+deprecated.
@item mml2015-use
@vindex mml2015-use
Symbol indicating elisp interface to OpenPGP implementation for
-PGP/MIME messages. The default is @code{pgg}, but @code{mailcrypt}
-and @code{gpg} are also supported although deprecated.
+@acronym{PGP/MIME} messages. The default is @code{pgg}, but
+@code{mailcrypt} and @code{gpg} are also supported although
+deprecated.
@end table
+@cindex snarfing keys
+@cindex importing PGP keys
+@cindex PGP key ring import
+Snarfing OpenPGP keys (i.e., importing keys from articles into your
+key ring) is not supported explicitly through a menu item or command,
+rather Gnus do detect and label keys as @samp{application/pgp-keys},
+allowing you to specify whatever action you think is appropriate
+through the usual @acronym{MIME} infrastructure. You can use a
+@file{~/.mailcap} entry (@pxref{mailcap, , mailcap, emacs-mime, The
+Emacs MIME Manual}) such as the following to import keys using GNU
+Privacy Guard when you click on the @acronym{MIME} button
+(@pxref{Using MIME}).
+
+@example
+application/pgp-keys; gpg --import --interactive --verbose; needsterminal
+@end example
+@noindent
+This happens to also be the default action defined in
+@code{mailcap-mime-data}.
+
@node Mailing List
@section Mailing List
+@cindex mailing list
+@cindex RFC 2396
@kindex A M (summary)
@findex gnus-mailing-list-insinuate
@item C-c C-n a
@kindex C-c C-n a (Summary)
-@findex gnus-mailing-list-owner
+@findex gnus-mailing-list-archive
Browse the mailing list archive, if List-Archive field exists.
@end table
+
@node Article Buffer
@chapter Article Buffer
@cindex article buffer
@menu
* Hiding Headers:: Deciding what headers should be displayed.
-* Using MIME:: Pushing articles through @sc{mime} before reading them.
+* Using MIME:: Pushing articles through @acronym{MIME} before reading them.
* Customizing Articles:: Tailoring the look of the articles.
* Article Keymap:: Keystrokes available in the article buffer.
* Misc Article:: Other stuff.
article. That's well and nice, but there's also lots of information
most people do not want to see---what systems the article has passed
through before reaching you, the @code{Message-ID}, the
-@code{References}, etc. ad nauseum---and you'll probably want to get rid
+@code{References}, etc. ad nauseam---and you'll probably want to get rid
of some of those lines. If you want to keep all those lines in the
article buffer, you can set @code{gnus-show-all-headers} to @code{t}.
You can hide further boring headers by setting
@code{gnus-treat-hide-boring-headers} to @code{head}. What this function
does depends on the @code{gnus-boring-article-headers} variable. It's a
-list, but this list doesn't actually contain header names. Instead is
+list, but this list doesn't actually contain header names. Instead it
lists various @dfn{boring conditions} that Gnus can check and remove
from sight.
Remove the @code{Followup-To} header if it is identical to the
@code{Newsgroups} header.
@item reply-to
-Remove the @code{Reply-To} header if it lists the same address as the
-@code{From} header.
+Remove the @code{Reply-To} header if it lists the same addresses as
+the @code{From} header, or if the @code{broken-reply-to} group
+parameter is set.
@item newsgroups
Remove the @code{Newsgroups} header if it only contains the current group
name.
@item to-address
Remove the @code{To} header if it only contains the address identical to
-the current groups's @code{to-address} parameter.
+the current group's @code{to-address} parameter.
@item to-list
Remove the @code{To} header if it only contains the address identical to
-the current groups's @code{to-list} parameter.
+the current group's @code{to-list} parameter.
@item cc-list
Remove the @code{CC} header if it only contains the address identical to
-the current groups's @code{to-list} parameter.
+the current group's @code{to-list} parameter.
@item date
Remove the @code{Date} header if the article is less than three days
old.
@node Using MIME
@section Using MIME
-@cindex @sc{mime}
+@cindex @acronym{MIME}
Mime is a standard for waving your hands through the air, aimlessly,
while people stand around yawning.
-@sc{mime}, however, is a standard for encoding your articles, aimlessly,
+@acronym{MIME}, however, is a standard for encoding your articles, aimlessly,
while all newsreaders die of fear.
-@sc{mime} may specify what character set the article uses, the encoding
+@acronym{MIME} may specify what character set the article uses, the encoding
of the characters, and it also makes it possible to embed pictures and
other naughty stuff in innocent-looking articles.
@vindex gnus-display-mime-function
@findex gnus-display-mime
-Gnus pushes @sc{mime} articles through @code{gnus-display-mime-function}
-to display the @sc{mime} parts. This is @code{gnus-display-mime} by
+Gnus pushes @acronym{MIME} articles through @code{gnus-display-mime-function}
+to display the @acronym{MIME} parts. This is @code{gnus-display-mime} by
default, which creates a bundle of clickable buttons that can be used to
-display, save and manipulate the @sc{mime} objects.
+display, save and manipulate the @acronym{MIME} objects.
The following commands are available when you have placed point over a
-@sc{mime} button:
+@acronym{MIME} button:
@table @kbd
@findex gnus-article-press-button
@item RET (Article)
@kindex RET (Article)
@itemx BUTTON-2 (Article)
-Toggle displaying of the @sc{mime} object
-(@code{gnus-article-press-button}). If builtin viewers can not display
+Toggle displaying of the @acronym{MIME} object
+(@code{gnus-article-press-button}). If built-in viewers can not display
the object, Gnus resorts to external viewers in the @file{mailcap}
files. If a viewer has the @samp{copiousoutput} specification, the
object is displayed inline.
@item M-RET (Article)
@kindex M-RET (Article)
@itemx v (Article)
-Prompt for a method, and then view the @sc{mime} object using this
+Prompt for a method, and then view the @acronym{MIME} object using this
method (@code{gnus-mime-view-part}).
@findex gnus-mime-view-part-as-type
@item t (Article)
@kindex t (Article)
-View the @sc{mime} object as if it were a different @sc{mime} media type
+View the @acronym{MIME} object as if it were a different @acronym{MIME} media type
(@code{gnus-mime-view-part-as-type}).
@findex gnus-mime-view-part-as-charset
@item C (Article)
@kindex C (Article)
-Prompt for a charset, and then view the @sc{mime} object using this
+Prompt for a charset, and then view the @acronym{MIME} object using this
charset (@code{gnus-mime-view-part-as-charset}).
@findex gnus-mime-save-part
@item o (Article)
@kindex o (Article)
-Prompt for a file name, and then save the @sc{mime} object
+Prompt for a file name, and then save the @acronym{MIME} object
(@code{gnus-mime-save-part}).
@findex gnus-mime-save-part-and-strip
@item C-o (Article)
@kindex C-o (Article)
-Prompt for a file name, then save the @sc{mime} object and strip it from
+Prompt for a file name, then save the @acronym{MIME} object and strip it from
the article. Then proceed to article editing, where a reasonable
suggestion is being made on how the altered article should look
-like. The stripped @sc{mime} object will be referred via the
-message/external-body @sc{mime} type.
+like. The stripped @acronym{MIME} object will be referred via the
+message/external-body @acronym{MIME} type.
(@code{gnus-mime-save-part-and-strip}).
@findex gnus-mime-delete-part
@item d (Article)
@kindex d (Article)
-Delete the @sc{mime} object from the article and replace it with some
-information about the removed @sc{mime} object
+Delete the @acronym{MIME} object from the article and replace it with some
+information about the removed @acronym{MIME} object
(@code{gnus-mime-delete-part}).
@findex gnus-mime-copy-part
@item c (Article)
@kindex c (Article)
-Copy the @sc{mime} object to a fresh buffer and display this buffer
+Copy the @acronym{MIME} object to a fresh buffer and display this buffer
(@code{gnus-mime-copy-part}). Compressed files like @file{.gz} and
@file{.bz2} are automatically decompressed if
@code{auto-compression-mode} is enabled (@pxref{Compressed Files,,
@findex gnus-mime-print-part
@item p (Article)
@kindex p (Article)
-Print the @sc{mime} object (@code{gnus-mime-print-part}). This
+Print the @acronym{MIME} object (@code{gnus-mime-print-part}). This
command respects the @samp{print=} specifications in the
@file{.mailcap} file.
@findex gnus-mime-inline-part
@item i (Article)
@kindex i (Article)
-Insert the contents of the @sc{mime} object into the buffer
+Insert the contents of the @acronym{MIME} object into the buffer
(@code{gnus-mime-inline-part}) as text/plain. If given a prefix, insert
the raw contents without decoding. If given a numerical prefix, you can
do semi-manual charset stuff (see
-@code{gnus-summary-show-article-charset-alist} in @pxref{Paging the
+@code{gnus-summary-show-article-charset-alist} in @ref{Paging the
Article}).
@findex gnus-mime-view-part-internally
@item E (Article)
@kindex E (Article)
-View the @sc{mime} object with an internal viewer. If no internal
+View the @acronym{MIME} object with an internal viewer. If no internal
viewer is available, use an external viewer
(@code{gnus-mime-view-part-internally}).
@findex gnus-mime-view-part-externally
@item e (Article)
@kindex e (Article)
-View the @sc{mime} object with an external viewer.
+View the @acronym{MIME} object with an external viewer.
(@code{gnus-mime-view-part-externally}).
@findex gnus-mime-pipe-part
@item | (Article)
@kindex | (Article)
-Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
+Output the @acronym{MIME} object to a process (@code{gnus-mime-pipe-part}).
@findex gnus-mime-action-on-part
@item . (Article)
@kindex . (Article)
-Interactively run an action on the @sc{mime} object
+Interactively run an action on the @acronym{MIME} object
(@code{gnus-mime-action-on-part}).
@end table
-Gnus will display some @sc{mime} objects automatically. The way Gnus
+Gnus will display some @acronym{MIME} objects automatically. The way Gnus
determines which parts to do this with is described in the Emacs
-@sc{mime} manual.
+@acronym{MIME} manual.
It might be best to just use the toggling functions from the article
buffer to avoid getting nasty surprises. (For instance, you enter the
-group @samp{alt.sing-a-long} and, before you know it, @sc{mime} has
+group @samp{alt.sing-a-long} and, before you know it, @acronym{MIME} has
decoded the sound file in the article and some horrible sing-a-long song
comes screaming out your speakers, and you can't find the volume button,
because there isn't one, and people are starting to look at you, and you
Any similarity to real events and people is purely coincidental. Ahem.
-Also see @pxref{MIME Commands}.
+Also @pxref{MIME Commands}.
@node Customizing Articles
@end enumerate
You may have noticed that the word @dfn{part} is used here. This refers
-to the fact that some messages are @sc{mime} multipart articles that may
+to the fact that some messages are @acronym{MIME} multipart articles that may
be divided into several parts. Articles that are not multiparts are
considered to contain just a single part.
@xref{Smileys}.
-@item gnus-treat-display-xface (head)
+@item gnus-treat-display-x-face (head)
@xref{X-Face}.
+@item gnus-treat-display-face (head)
+
+@xref{Face}.
+
@item gnus-treat-emphasize (t, head, integer)
@item gnus-treat-fill-article (t, integer)
@item gnus-treat-fill-long-lines (t, integer)
@item gnus-treat-play-sounds
@item gnus-treat-translate
+@item gnus-treat-ansi-sequences (t)
@item gnus-treat-x-pgp-sig (head)
@item gnus-treat-unfold-headers (head)
@vindex gnus-article-decode-hook
@item gnus-article-decode-hook
-@cindex MIME
-Hook used to decode @sc{mime} articles. The default value is
+@cindex @acronym{MIME}
+Hook used to decode @acronym{MIME} articles. The default value is
@code{(article-decode-charset article-decode-encoded-words)}
@vindex gnus-article-prepare-hook
Syntax table used in article buffers. It is initialized from
@code{text-mode-syntax-table}.
+@vindex gnus-article-over-scroll
+@item gnus-article-over-scroll
+If non-@code{nil}, allow scrolling the article buffer even when there
+no more new text to scroll in. The default is @code{nil}.
+
@vindex gnus-article-mode-line-format
@item gnus-article-mode-line-format
This variable is a format string along the same lines as
-@code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}). It
-accepts the same format specifications as that variable, with two
-extensions:
+@code{gnus-summary-mode-line-format} (@pxref{Summary Buffer Mode
+Line}). It accepts the same format specifications as that variable,
+with two extensions:
@table @samp
@end table
@item m
-The number of @sc{mime} parts in the article.
+The number of @acronym{MIME} parts in the article.
@end table
@vindex gnus-use-idna
@item gnus-use-idna
This variable controls whether Gnus performs IDNA decoding of
-internationalized domain names inside @sc{From:}, @sc{To:} and
-@sc{Cc:} headers. This requires GNU Libidn
-(@url{http://www.gnu.org/software/libidn/}, and this variable is only
-enabled if you have installed it.
+internationalized domain names inside @samp{From}, @samp{To} and
+@samp{Cc} headers. This requires
+@uref{http://www.gnu.org/software/libidn/, GNU Libidn}, and this
+variable is only enabled if you have installed it.
@end table
@menu
* Mail:: Mailing and replying.
* Posting Server:: What server should you post and mail via?
+* POP before SMTP:: You cannot send a mail unless you read a mail.
* Mail and Post:: Mailing and posting at the same time.
* Archived Messages:: Where Gnus stores the messages you've sent.
* Posting Styles:: An easier way to specify who you are.
* Signing and encrypting:: How to compose secure messages.
@end menu
-Also see @pxref{Canceling and Superseding} for information on how to
+Also @pxref{Canceling and Superseding} for information on how to
remove articles you shouldn't have posted.
If non-@code{nil}, Gnus also requests confirmation according to
@code{gnus-confirm-mail-reply-to-news} when replying to mail. This is
useful for treating mailing lists like newsgroups.
-
+
@end table
The default function, @code{message-send-mail-with-sendmail}, pipes
your article to the @code{sendmail} binary for further queuing and
sending. When your local system is not configured for sending mail
-using @code{sendmail}, and you have access to a remote @sc{smtp}
+using @code{sendmail}, and you have access to a remote @acronym{SMTP}
server, you can set @code{message-send-mail-function} to
@code{smtpmail-send-it} and make sure to setup the @code{smtpmail}
package correctly. An example:
smtpmail-default-smtp-server "YOUR SMTP HOST")
@end lisp
-To the thing similar to this, there is @code{message-smtpmail-send-it}.
-It is useful if your ISP requires the POP-before-SMTP authentication.
-See the documentation for the function @code{mail-source-touch-pop}.
+To the thing similar to this, there is
+@code{message-smtpmail-send-it}. It is useful if your @acronym{ISP}
+requires the @acronym{POP}-before-@acronym{SMTP} authentication.
+@xref{POP before SMTP}.
Other possible choices for @code{message-send-mail-function} includes
@code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
and @code{feedmail-send-it}.
+@node POP before SMTP
+@section POP before SMTP
+@cindex pop before smtp
+@findex message-smtpmail-send-it
+@findex mail-source-touch-pop
+
+Does your @acronym{ISP} require the @acronym{POP}-before-@acronym{SMTP}
+authentication? It is whether you need to connect to the @acronym{POP}
+mail server within a certain time before sending mails. If so, there is
+a convenient way. To do that, put the following lines in your
+@file{~/.gnus.el} file:
+
+@lisp
+(setq message-send-mail-function 'message-smtpmail-send-it)
+(add-hook 'message-send-mail-hook 'mail-source-touch-pop)
+@end lisp
+
+@noindent
+It means to let Gnus connect to the @acronym{POP} mail server in advance
+whenever you send a mail. The @code{mail-source-touch-pop} function
+does only a @acronym{POP} authentication according to the value of
+@code{mail-sources} without fetching mails, just before sending a mail.
+Note that you have to use @code{message-smtpmail-send-it} which runs
+@code{message-send-mail-hook} rather than @code{smtpmail-send-it} and
+set the value of @code{mail-sources} for a @acronym{POP} connection
+correctly. @xref{Mail Sources}.
+
+If you have two or more @acronym{POP} mail servers set in
+@code{mail-sources}, you may want to specify one of them to
+@code{mail-source-primary-source} as the @acronym{POP} mail server to be
+used for the @acronym{POP}-before-@acronym{SMTP} authentication. If it
+is your primary @acronym{POP} mail server (i.e., you are fetching mails
+mainly from that server), you can set it permanently as follows:
+
+@lisp
+(setq mail-source-primary-source
+ '(pop :server "pop3.mail.server"
+ :password "secret"))
+@end lisp
+
+@noindent
+Otherwise, bind it dynamically only when performing the
+@acronym{POP}-before-@acronym{SMTP} authentication as follows:
+
+@lisp
+(add-hook 'message-send-mail-hook
+ (lambda ()
+ (let ((mail-source-primary-source
+ '(pop :server "pop3.mail.server"
+ :password "secret")))
+ (mail-source-touch-pop))))
+@end lisp
+
@node Mail and Post
@section Mail and Post
@cindex mailing lists
If your news server offers groups that are really mailing lists
-gatewayed to the @sc{nntp} server, you can read those groups without
+gatewayed to the @acronym{NNTP} server, you can read those groups without
problems, but you can't post/followup to them without some difficulty.
One solution is to add a @code{to-address} to the group parameters
(@pxref{Group Parameters}). An easier thing to do is set the
@code{emacs-gnus-config} (same as @code{emacs-gnus} plus system
configuration), @code{emacs-gnus-type} (same as @code{emacs-gnus} plus
system type) or a custom string. If you set it to a string, be sure to
-use a valid format, see RFC 2616."
+use a valid format, see RFC 2616.
@end table
This variable can be used to do the following:
-@itemize @bullet
-@item
-a string
+@table @asis
+@item a string
Messages will be saved in that group.
Note that you can include a select method in the group name, then the
messages are stored in @samp{nnfolder+archive:foo}, but if you use the
value @code{"nnml:foo"}, then outgoing messages will be stored in
@samp{nnml:foo}.
-@item
-a list of strings
+
+@item a list of strings
Messages will be saved in all those groups.
-@item
-an alist of regexps, functions and forms
+
+@item an alist of regexps, functions and forms
When a key ``matches'', the result is used.
-@item
-@code{nil}
+
+@item @code{nil}
No message archiving will take place. This is the default.
-@end itemize
+@end table
Let's illustrate:
If it is the form @code{(header @var{match} @var{regexp})}, then Gnus
will look in the original article for a header whose name is
@var{match} and compare that @var{regexp}. @var{match} and
-@var{regexp} are strings. (There original article is the one you are
+@var{regexp} are strings. (The original article is the one you are
replying or following up to. If you are not composing a reply or a
followup, then there is nothing to match against.) If the
@code{match} is a function symbol, that function will be called with
Each style may contain an arbitrary amount of @dfn{attributes}. Each
attribute consists of a @code{(@var{name} @var{value})} pair. The
-attribute name can be one of @code{signature}, @code{signature-file},
-@code{x-face-file}, @code{address} (overriding
-@code{user-mail-address}), @code{name} (overriding
-@code{(user-full-name)}) or @code{body}. The attribute name can also
-be a string or a symbol. In that case, this will be used as a header
-name, and the value will be inserted in the headers of the article; if
-the value is @code{nil}, the header name will be removed. If the
-attribute name is @code{eval}, the form is evaluated, and the result
-is thrown away.
+attribute name can be one of:
+
+@itemize @bullet
+@item @code{signature}
+@item @code{signature-file}
+@item @code{x-face-file}
+@item @code{address}, overriding @code{user-mail-address}
+@item @code{name}, overriding @code{(user-full-name)}
+@item @code{body}
+@end itemize
+
+The attribute name can also be a string or a symbol. In that case,
+this will be used as a header name, and the value will be inserted in
+the headers of the article; if the value is @code{nil}, the header
+name will be removed. If the attribute name is @code{eval}, the form
+is evaluated, and the result is thrown away.
The attribute value can be a string (used verbatim), a function with
zero arguments (the return value will be used), a variable (its value
(organization "People's Front Against MWM"))
("^rec.humor"
(signature my-funny-signature-randomizer))
- ((equal (system-name) "gnarly") ;; A form
+ ((equal (system-name) "gnarly") ;; @r{A form}
(signature my-quote-randomizer))
- (message-news-p ;; A function symbol
+ (message-news-p ;; @r{A function symbol}
(signature my-news-signature))
- (window-system ;; A value symbol
+ (window-system ;; @r{A value symbol}
("X-Window-System" (format "%s" window-system)))
- ;; If I'm replying to Larsi, set the Organization header.
+ ;; @r{If I'm replying to Larsi, set the Organization header.}
((header "from" "larsi.*org")
(Organization "Somewhere, Inc."))
- ((posting-from-work-p) ;; A user defined function
+ ((posting-from-work-p) ;; @r{A user defined function}
(signature-file "~/.work-signature")
(address "user@@bar.foo")
(body "You are fired.\n\nSincerely, your boss.")
@cindex using s/mime
@cindex using smime
-Gnus can digitally sign and encrypt your messages, using vanilla PGP
-format or @sc{pgp/mime} or @sc{s/mime}. For decoding such messages,
-see the @code{mm-verify-option} and @code{mm-decrypt-option} options
-(@pxref{Security}).
+Gnus can digitally sign and encrypt your messages, using vanilla
+@acronym{PGP} format or @acronym{PGP/MIME} or @acronym{S/MIME}. For
+decoding such messages, see the @code{mm-verify-option} and
+@code{mm-decrypt-option} options (@pxref{Security}).
@vindex gnus-message-replysign
@vindex gnus-message-replyencrypt
@code{gnus-message-replysignencrypted} (on by default) will sign
automatically encrypted messages.
-Instructing MML to perform security operations on a @sc{mime} part is
-done using the @kbd{C-c C-m s} key map for signing and the @kbd{C-c
-C-m c} key map for encryption, as follows.
+Instructing @acronym{MML} to perform security operations on a
+@acronym{MIME} part is done using the @kbd{C-c C-m s} key map for
+signing and the @kbd{C-c C-m c} key map for encryption, as follows.
@table @kbd
@item C-c C-m s s
-@kindex C-c C-m s s
+@kindex C-c C-m s s (Message)
@findex mml-secure-message-sign-smime
-Digitally sign current message using @sc{s/mime}.
+Digitally sign current message using @acronym{S/MIME}.
@item C-c C-m s o
-@kindex C-c C-m s o
+@kindex C-c C-m s o (Message)
@findex mml-secure-message-sign-pgp
-Digitally sign current message using PGP.
+Digitally sign current message using @acronym{PGP}.
@item C-c C-m s p
-@kindex C-c C-m s p
+@kindex C-c C-m s p (Message)
@findex mml-secure-message-sign-pgp
-Digitally sign current message using @sc{pgp/mime}.
+Digitally sign current message using @acronym{PGP/MIME}.
@item C-c C-m c s
-@kindex C-c C-m c s
+@kindex C-c C-m c s (Message)
@findex mml-secure-message-encrypt-smime
-Digitally encrypt current message using @sc{s/mime}.
+Digitally encrypt current message using @acronym{S/MIME}.
@item C-c C-m c o
-@kindex C-c C-m c o
+@kindex C-c C-m c o (Message)
@findex mml-secure-message-encrypt-pgp
-Digitally encrypt current message using PGP.
+Digitally encrypt current message using @acronym{PGP}.
@item C-c C-m c p
-@kindex C-c C-m c p
+@kindex C-c C-m c p (Message)
@findex mml-secure-message-encrypt-pgpmime
-Digitally encrypt current message using @sc{pgp/mime}.
+Digitally encrypt current message using @acronym{PGP/MIME}.
@item C-c C-m C-n
-@kindex C-c C-m C-n
+@kindex C-c C-m C-n (Message)
@findex mml-unsecure-message
-Remove security related MML tags from message.
+Remove security related @acronym{MML} tags from message.
@end table
A @dfn{foreign group} is a group not read by the usual (or
default) means. It could be, for instance, a group from a different
-@sc{nntp} server, it could be a virtual group, or it could be your own
+@acronym{NNTP} server, it could be a virtual group, or it could be your own
personal mail group.
A foreign group (or any group, really) is specified by a @dfn{name} and
The @dfn{name} of the group is the name the back end will recognize the
group as.
-For instance, the group @samp{soc.motss} on the @sc{nntp} server
+For instance, the group @samp{soc.motss} on the @acronym{NNTP} server
@samp{some.where.edu} will have the name @samp{soc.motss} and select
method @code{(nntp "some.where.edu")}. Gnus will call this group
@samp{nntp+some.where.edu:soc.motss}, even though the @code{nntp}
* Getting News:: Reading USENET news with Gnus.
* Getting Mail:: Reading your personal mail with Gnus.
* Browsing the Web:: Getting messages from a plethora of Web sources.
-* IMAP:: Using Gnus as a @sc{imap} client.
+* IMAP:: Using Gnus as a @acronym{IMAP} client.
* Other Sources:: Reading directories, files, SOUP packets.
* Combined Groups:: Combining groups into one group.
* Gnus Unplugged:: Reading news and mail offline.
back end represents a virtual server.
For instance, the @code{nntp} back end may be used to connect to several
-different actual @sc{nntp} servers, or, perhaps, to many different ports
-on the same actual @sc{nntp} server. You tell Gnus which back end to
+different actual @acronym{NNTP} servers, or, perhaps, to many different ports
+on the same actual @acronym{NNTP} server. You tell Gnus which back end to
use, and what parameters to set by specifying a @dfn{select method}.
These select method specifications can sometimes become quite
complicated---say, for instance, that you want to read from the
-@sc{nntp} server @samp{news.funet.fi} on port number 13, which
-hangs if queried for @sc{nov} headers and has a buggy select. Ahem.
+@acronym{NNTP} server @samp{news.funet.fi} on port number 13, which
+hangs if queried for @acronym{NOV} headers and has a buggy select. Ahem.
Anyway, if you had to specify that for each group that used this
server, that would be too much work, so Gnus offers a way of naming
select methods, which is what you do in the server buffer.
@cindex proxy
@cindex firewall
-If you are behind a firewall and only have access to the @sc{nntp}
+If you are behind a firewall and only have access to the @acronym{NNTP}
server from the firewall machine, you can instruct Gnus to @code{rlogin}
-on the firewall machine and telnet from there to the @sc{nntp} server.
+on the firewall machine and telnet from there to the @acronym{NNTP} server.
Doing this can be rather fiddly, but your virtual server definition
should probably look something like this:
articles, you may want to create a virtual server to read the cache.
First you need to add a new server. The @kbd{a} command does that. It
-would probably be best to use @code{nnspool} to read the cache. You
-could also use @code{nnml} or @code{nnmh}, though.
+would probably be best to use @code{nnml} to read the cache. You
+could also use @code{nnspool} or @code{nnmh}, though.
-Type @kbd{a nnspool RET cache RET}.
+Type @kbd{a nnml RET cache RET}.
-You should now have a brand new @code{nnspool} virtual server called
+You should now have a brand new @code{nnml} virtual server called
@samp{cache}. You now need to edit it to have the right definitions.
Type @kbd{e} to edit the server. You'll be entered into a buffer that
will contain the following:
@lisp
-(nnspool "cache")
+(nnml "cache")
@end lisp
Change that to:
@lisp
-(nnspool "cache"
- (nnspool-spool-directory "~/News/cache/")
- (nnspool-nov-directory "~/News/cache/")
- (nnspool-active-file "~/News/cache/active"))
+(nnml "cache"
+ (nnml-directory "~/News/cache/")
+ (nnml-active-file "~/News/cache/active"))
@end lisp
Type @kbd{C-c C-c} to return to the server buffer. If you now press
@node Server Variables
@subsection Server Variables
+@cindex server variables
+@cindex server parameters
One sticky point when defining variables (both on back ends and in Emacs
in general) is that some variables are typically initialized from other
(nnml-newsgroups-file "~/my-mail/newsgroups"))
@end lisp
+Server variables are often called @dfn{server parameters}.
@node Servers and Methods
@subsection Servers and Methods
@cindex news back ends
A newsreader is normally used for reading news. Gnus currently provides
-only two methods of getting news---it can read from an @sc{nntp} server,
+only two methods of getting news---it can read from an @acronym{NNTP} server,
or it can read from a local spool.
@menu
-* NNTP:: Reading news from an @sc{nntp} server.
+* NNTP:: Reading news from an @acronym{NNTP} server.
* News Spool:: Reading news from the local spool.
@end menu
@subsection NNTP
@cindex nntp
-Subscribing to a foreign group from an @sc{nntp} server is rather easy.
-You just specify @code{nntp} as method and the address of the @sc{nntp}
+Subscribing to a foreign group from an @acronym{NNTP} server is rather easy.
+You just specify @code{nntp} as method and the address of the @acronym{NNTP}
server as the, uhm, address.
-If the @sc{nntp} server is located at a non-standard port, setting the
+If the @acronym{NNTP} server is located at a non-standard port, setting the
third element of the select method to this port number should allow you
to connect to the right port. You'll have to edit the group info for
that (@pxref{Foreign Groups}).
@findex nntp-send-authinfo
@findex nntp-send-mode-reader
is run after a connection has been made. It can be used to send
-commands to the @sc{nntp} server after it has been contacted. By
+commands to the @acronym{NNTP} server after it has been contacted. By
default it sends the command @code{MODE READER} to the server with the
@code{nntp-send-mode-reader} function. This function should always be
present in this hook.
@vindex nntp-authinfo-function
@findex nntp-send-authinfo
@vindex nntp-authinfo-file
-This function will be used to send @samp{AUTHINFO} to the @sc{nntp}
+This function will be used to send @samp{AUTHINFO} to the @acronym{NNTP}
server. The default function is @code{nntp-send-authinfo}, which looks
through your @file{~/.authinfo} (or whatever you've set the
@code{nntp-authinfo-file} variable to) for applicable entries. If none
@item nntp-maximum-request
@vindex nntp-maximum-request
-If the @sc{nntp} server doesn't support @sc{nov} headers, this back end
+If the @acronym{NNTP} server doesn't support @acronym{NOV} headers, this back end
will collect headers by sending a series of @code{head} commands. To
speed things up, the back end sends lots of these commands without
waiting for reply, and then reads all the replies. This is controlled
@item nntp-connection-timeout
@vindex nntp-connection-timeout
If you have lots of foreign @code{nntp} groups that you connect to
-regularly, you're sure to have problems with @sc{nntp} servers not
+regularly, you're sure to have problems with @acronym{NNTP} servers not
responding properly, or being too loaded to reply within reasonable
time. This is can lead to awkward problems, which can be helped
somewhat by setting @code{nntp-connection-timeout}. This is an integer
@c @cindex dynamic IP addresses
@c If you're running Gnus on a machine that has a dynamically assigned
@c address, Gnus may become confused. If the address of your machine
-@c changes after connecting to the @sc{nntp} server, Gnus will simply sit
+@c changes after connecting to the @acronym{NNTP} server, Gnus will simply sit
@c waiting forever for replies from the server. To help with this
@c unfortunate problem, you can set this command to a number. Gnus will
@c then, if it sits waiting for a reply from the server longer than that
@item nntp-server-hook
@vindex nntp-server-hook
-This hook is run as the last step when connecting to an @sc{nntp}
+This hook is run as the last step when connecting to an @acronym{NNTP}
server.
@item nntp-buggy-select
@item nntp-nov-is-evil
@vindex nntp-nov-is-evil
-If the @sc{nntp} server does not support @sc{nov}, you could set this
-variable to @code{t}, but @code{nntp} usually checks automatically whether @sc{nov}
+If the @acronym{NNTP} server does not support @acronym{NOV}, you could set this
+variable to @code{t}, but @code{nntp} usually checks automatically whether @acronym{NOV}
can be used.
@item nntp-xover-commands
@vindex nntp-xover-commands
-@cindex nov
+@cindex @acronym{NOV}
@cindex XOVER
-List of strings used as commands to fetch @sc{nov} lines from a
+List of strings used as commands to fetch @acronym{NOV} lines from a
server. The default value of this variable is @code{("XOVER"
"XOVERVIEW")}.
@item nntp-nov-gap
@vindex nntp-nov-gap
-@code{nntp} normally sends just one big request for @sc{nov} lines to
+@code{nntp} normally sends just one big request for @acronym{NOV} lines to
the server. The server responds with one huge list of lines. However,
if you have read articles 2-5000 in the group, and only want to read
-article 1 and 5001, that means that @code{nntp} will fetch 4999 @sc{nov}
+article 1 and 5001, that means that @code{nntp} will fetch 4999 @acronym{NOV}
lines that you will not need. This variable says how
big a gap between two consecutive articles is allowed to be before the
@code{XOVER} request is split into several request. Note that if your
@item nntp-prepare-server-hook
@vindex nntp-prepare-server-hook
-A hook run before attempting to connect to an @sc{nntp} server.
+A hook run before attempting to connect to an @acronym{NNTP} server.
@item nntp-warn-about-losing-connection
@vindex nntp-warn-about-losing-connection
@item nntp-record-commands
@vindex nntp-record-commands
If non-@code{nil}, @code{nntp} will log all commands it sends to the
-@sc{nntp} server (along with a timestamp) in the @samp{*nntp-log*}
-buffer. This is useful if you are debugging a Gnus/@sc{nntp} connection
+@acronym{NNTP} server (along with a timestamp) in the @samp{*nntp-log*}
+buffer. This is useful if you are debugging a Gnus/@acronym{NNTP} connection
that doesn't seem to work.
@item nntp-open-connection-function
@cindex direct connection functions
These functions are called direct because they open a direct connection
-between your machine and the @sc{nntp} server. The behavior of these
+between your machine and the @acronym{NNTP} server. The behavior of these
functions is also affected by commonly understood variables
(@pxref{Common Variables}).
@findex nntp-open-tls-stream
@item nntp-open-tls-stream
Opens a connection to a server over a @dfn{secure} channel. To use
-this you must have GNUTLS installed (see
-@uref{http://www.gnu.org/software/gnutls/}). You then define a server
-as follows:
+this you must have @uref{http://www.gnu.org/software/gnutls/, GNUTLS}
+installed. You then define a server as follows:
@lisp
-;; "nntps" is port 563 and is predefined in our /etc/services
-;; however, gnutls-cli -p doesn't like named ports.
+;; @r{"nntps" is port 563 and is predefined in our @file{/etc/services}}
+;; @r{however, @samp{gnutls-cli -p} doesn't like named ports.}
;;
(nntp "snews.bar.com"
(nntp-open-connection-function nntp-open-tls-stream)
@findex nntp-open-ssl-stream
@item nntp-open-ssl-stream
-Opens a connection to a server over a @dfn{secure} channel. To use this
-you must have OpenSSL (@uref{http://www.openssl.org}) or SSLeay
-installed (@uref{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}. You then
-define a server as follows:
+Opens a connection to a server over a @dfn{secure} channel. To use
+this you must have @uref{http://www.openssl.org, OpenSSL} or
+@uref{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL, SSLeay} installed. You
+then define a server as follows:
@lisp
-;; "snews" is port 563 and is predefined in our /etc/services
-;; however, openssl s_client -port doesn't like named ports.
+;; @r{"snews" is port 563 and is predefined in our @file{/etc/services}}
+;; @r{however, @samp{openssl s_client -port} doesn't like named ports.}
;;
(nntp "snews.bar.com"
(nntp-open-connection-function nntp-open-ssl-stream)
@findex nntp-open-telnet-stream
@item nntp-open-telnet-stream
-Opens a connection to an @sc{nntp} server by simply @samp{telnet}'ing
+Opens a connection to an @acronym{NNTP} server by simply @samp{telnet}'ing
it. You might wonder why this function exists, since we have the
default @code{nntp-open-network-stream} which would do the job. (One
of) the reason(s) is that if you are behind a firewall but have direct
@cindex indirect connection functions
These functions are called indirect because they connect to an
-intermediate host before actually connecting to the @sc{nntp} server.
+intermediate host before actually connecting to the @acronym{NNTP} server.
All of these functions and related variables are also said to belong to
the ``via'' family of connection: they're all prefixed with ``via'' to make
things cleaner. The behavior of these functions is also affected by
@item nntp-open-via-rlogin-and-telnet
@findex nntp-open-via-rlogin-and-telnet
Does an @samp{rlogin} on a remote system, and then does a @samp{telnet}
-to the real @sc{nntp} server from there. This is useful for instance if
+to the real @acronym{NNTP} server from there. This is useful for instance if
you need to connect to a firewall machine first.
@code{nntp-open-via-rlogin-and-telnet}-specific variables:
@vindex nntp-via-envuser
If non-@code{nil}, the intermediate @code{telnet} session (client and
server both) will support the @code{ENVIRON} option and not prompt for
-login name. This works for Solaris @code{telnet}, for instance.
+login name. This works for Solaris @code{telnet}, for instance.
@item nntp-via-shell-prompt
@vindex nntp-via-shell-prompt
@subsubsection Common Variables
The following variables affect the behavior of all, or several of the
-pre-made connection functions. When not specified, all functions are
+pre-made connection functions. When not specified, all functions are
affected.
@table @code
@item nntp-address
@vindex nntp-address
-The address of the @sc{nntp} server.
+The address of the @acronym{NNTP} server.
@item nntp-port-number
@vindex nntp-port-number
-Port number to connect to the @sc{nntp} server. The default is
-@samp{nntp}. If you use @sc{nntp} over @sc{tls}/@sc{ssl}, you may
-want to use integer ports rather than named ports (i.e, use @samp{563}
-instead of @samp{snews} or @samp{nntps}), because external TLS/SSL
-tools may not work with named ports.
+Port number to connect to the @acronym{NNTP} server. The default is
+@samp{nntp}. If you use @acronym{NNTP} over
+@acronym{tls}/@acronym{ssl}, you may want to use integer ports rather
+than named ports (i.e, use @samp{563} instead of @samp{snews} or
+@samp{nntps}), because external @acronym{TLS}/@acronym{SSL} tools may
+not work with named ports.
@item nntp-end-of-line
@vindex nntp-end-of-line
-String to use as end-of-line marker when talking to the @sc{nntp}
+String to use as end-of-line marker when talking to the @acronym{NNTP}
server. This is @samp{\r\n} by default, but should be @samp{\n} when
using a non native connection function.
@item nntp-telnet-command
@vindex nntp-telnet-command
-Command to use when connecting to the @sc{nntp} server through
-@samp{telnet}. This is NOT for an intermediate host. This is just for
-the real @sc{nntp} server. The default is @samp{telnet}.
+Command to use when connecting to the @acronym{NNTP} server through
+@samp{telnet}. This is @emph{not} for an intermediate host. This is
+just for the real @acronym{NNTP} server. The default is
+@samp{telnet}.
@item nntp-telnet-switches
@vindex nntp-telnet-switches
@item nnspool-nov-directory
@vindex nnspool-nov-directory
-Where @code{nnspool} will look for @sc{nov} files. This is normally
+Where @code{nnspool} will look for @acronym{NOV} files. This is normally@*
@file{/usr/spool/news/over.view/}.
@item nnspool-lib-dir
@item nnspool-nov-is-evil
@vindex nnspool-nov-is-evil
-If non-@code{nil}, @code{nnspool} won't try to use any @sc{nov} files
+If non-@code{nil}, @code{nnspool} won't try to use any @acronym{NOV} files
that it finds.
@item nnspool-sift-nov-with-sed
@vindex nnspool-sift-nov-with-sed
@cindex sed
If non-@code{nil}, which is the default, use @code{sed} to get the
-relevant portion from the overview file. If nil, @code{nnspool} will
-load the entire file into a buffer and process it there.
+relevant portion from the overview file. If @code{nil},
+@code{nnspool} will load the entire file into a buffer and process it
+there.
@end table
* Group Mail Splitting:: Use group customize to drive mail splitting.
* Incorporating Old Mail:: What about the old mail you have?
* Expiring Mail:: Getting rid of unwanted mail.
-* Washing Mail:: Removing gruft from the mail you get.
+* Washing Mail:: Removing cruft from the mail you get.
* Duplicates:: Dealing with duplicated mail.
* Not Reading Mail:: Using mail back ends for reading other files.
* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
But, no, it means that old messages are @dfn{expired} according to some
scheme or other. For news messages, the expire process is controlled by
the news administrator; for mail, the expire process is controlled by
-you. The expire process for mail is covered in depth in @pxref{Expiring
+you. The expire process for mail is covered in depth in @ref{Expiring
Mail}.
What many Gnus users find, after using it a while for both news and
they want to treat a message.
Many people subscribe to several mailing lists. These are transported
-via @sc{smtp}, and are therefore mail. But we might go for weeks without
+via @acronym{SMTP}, and are therefore mail. But we might go for weeks without
answering, or even reading these messages very carefully. We may not
need to save them because if we should need to read one again, they are
archived somewhere else.
Some people have local news groups which have only a handful of readers.
-These are transported via @sc{nntp}, and are therefore news. But we may need
+These are transported via @acronym{NNTP}, and are therefore news. But we may need
to read and answer a large fraction of the messages very carefully in
order to do our work. And there may not be an archive, so we may need
to save the interesting messages the same way we would personal mail.
and things will happen automatically.
For instance, if you want to use @code{nnml} (which is a ``one file per
-mail'' back end), you could put the following in your @file{.gnus.el} file:
+mail'' back end), you could put the following in your @file{~/.gnus.el} file:
@lisp
(setq gnus-secondary-select-methods '((nnml "")))
@subsection Splitting Mail
@cindex splitting mail
@cindex mail splitting
+@cindex mail filtering (splitting)
@vindex nnmail-split-methods
The @code{nnmail-split-methods} variable says how the incoming mail is
variable is @code{add-name-to-file} by default.)
@kindex M-x nnmail-split-history
-@kindex nnmail-split-history
+@findex nnmail-split-history
If you wish to see where the previous mail split put the messages, you
can use the @kbd{M-x nnmail-split-history} command. If you wish to see
where re-spooling messages would put the messages, you can use
@vindex nnmail-mail-splitting-charset
@vindex nnmail-mail-splitting-decodes
-By default the splitting codes @sc{mime} decodes headers so you can match
-on non-ASCII strings. The @code{nnmail-mail-splitting-charset}
-variable specifies the default charset for decoding. The behaviour
-can be turned off completely by binding
-@code{nnmail-mail-splitting-decodes} to nil, which is useful if you
-want to match articles based on the raw header data.
+By default the splitting codes @acronym{MIME} decodes headers so you
+can match on non-@acronym{ASCII} strings. The
+@code{nnmail-mail-splitting-charset} variable specifies the default
+charset for decoding. The behaviour can be turned off completely by
+binding @code{nnmail-mail-splitting-decodes} to @code{nil}, which is
+useful if you want to match articles based on the raw header data.
@vindex nnmail-resplit-incoming
-By default, splitting is performed on all incoming messages. If
-you specify a @code{directory} entry for the variable
-@code{mail-sources} @pxref{Mail Source Specifiers}, however, then
-splitting does @emph{not} happen by default. You can set the variable
-@code{nnmail-resplit-incoming} to a non-nil value to make splitting
-happen even in this case. (This variable has no effect on other kinds
-of entries.)
+By default, splitting is performed on all incoming messages. If you
+specify a @code{directory} entry for the variable @code{mail-sources}
+(@pxref{Mail Source Specifiers}), however, then splitting does
+@emph{not} happen by default. You can set the variable
+@code{nnmail-resplit-incoming} to a non-@code{nil} value to make
+splitting happen even in this case. (This variable has no effect on
+other kinds of entries.)
Gnus gives you all the opportunity you could possibly want for shooting
yourself in the foot. Let's say you create a group that will contain
@node Mail Sources
@subsection Mail Sources
-Mail can be gotten from many different sources---the mail spool, from a
-POP mail server, from a procmail directory, or from a maildir, for
-instance.
+Mail can be gotten from many different sources---the mail spool, from
+a @acronym{POP} mail server, from a procmail directory, or from a
+maildir, for instance.
@menu
* Mail Source Specifiers:: How to specify what a mail source is.
@table @code
@item :path
-The file name. Defaults to the value of the @code{MAIL}
+The file name. Defaults to the value of the @env{MAIL}
environment variable or the value of @code{rmail-spool-directory}
(usually something like @file{/usr/mail/spool/user-name}).
(file)
@end lisp
-If the mail spool file is not located on the local machine, it's best to
-use POP or @sc{imap} or the like to fetch the mail. You can not use ange-ftp
-file names here---it has no way to lock the mail spool while moving the
-mail.
+If the mail spool file is not located on the local machine, it's best
+to use @acronym{POP} or @acronym{IMAP} or the like to fetch the mail.
+You can not use ange-ftp file names here---it has no way to lock the
+mail spool while moving the mail.
If it's impossible to set up a proper server, you can use ssh instead.
@item directory
@vindex nnmail-scan-directory-mail-source-once
-Get mail from several files in a directory. This is typically used when
-you have procmail split the incoming mail into several files. That is,
-there is a one-to-one correspondence between files in that directory and
-groups, so that mail from the file @file{foo.bar.spool} will be put in
-the group @code{foo.bar}. (You can change the suffix to be used instead
-of @code{.spool}.) Setting
-@code{nnmail-scan-directory-mail-source-once} to non-nil forces Gnus to
-scan the mail source only once. This is particularly useful if you want
-to scan mail groups at a specified level.
+Get mail from several files in a directory. This is typically used
+when you have procmail split the incoming mail into several files.
+That is, there is a one-to-one correspondence between files in that
+directory and groups, so that mail from the file @file{foo.bar.spool}
+will be put in the group @code{foo.bar}. (You can change the suffix
+to be used instead of @code{.spool}.) Setting
+@code{nnmail-scan-directory-mail-source-once} to non-@code{nil} forces
+Gnus to scan the mail source only once. This is particularly useful
+if you want to scan mail groups at a specified level.
@vindex nnmail-resplit-incoming
There is also the variable @code{nnmail-resplit-incoming}, if you set
-that to a non-nil value, then the normal splitting process is applied
-to all the files from the directory, @ref{Splitting Mail}.
+that to a non-@code{nil} value, then the normal splitting process is
+applied to all the files from the directory, @ref{Splitting Mail}.
Keywords:
@end lisp
@item pop
-Get mail from a POP server.
+Get mail from a @acronym{POP} server.
Keywords:
@table @code
@item :server
-The name of the POP server. The default is taken from the
-@code{MAILHOST} environment variable.
+The name of the @acronym{POP} server. The default is taken from the
+@env{MAILHOST} environment variable.
@item :port
-The port number of the POP server. This can be a number (eg,
+The port number of the @acronym{POP} server. This can be a number (eg,
@samp{:port 1234}) or a string (eg, @samp{:port "pop3"}). If it is a
string, it should be a service name as listed in @file{/etc/services} on
Unix systems. The default is @samp{"pop3"}. On some systems you might
need to specify it as @samp{"pop-3"} instead.
@item :user
-The user name to give to the POP server. The default is the login
+The user name to give to the @acronym{POP} server. The default is the login
name.
@item :password
-The password to give to the POP server. If not specified, the user is
-prompted.
+The password to give to the @acronym{POP} server. If not specified,
+the user is prompted.
@item :program
-The program to use to fetch mail from the POP server. This should be
-a @code{format}-like string. Here's an example:
+The program to use to fetch mail from the @acronym{POP} server. This
+should be a @code{format}-like string. Here's an example:
@example
fetchmail %u@@%s -P %p %t
the @code{:program} keyword. This can also be a function to be run.
@item :function
-The function to use to fetch mail from the POP server. The function is
-called with one parameter---the name of the file where the mail should
-be moved to.
+The function to use to fetch mail from the @acronym{POP} server. The
+function is called with one parameter---the name of the file where the
+mail should be moved to.
@item :authentication
This can be either the symbol @code{password} or the symbol @code{apop}
If the @code{:program} and @code{:function} keywords aren't specified,
@code{pop3-movemail} will be used.
-Here are some examples. Fetch from the default POP server, using the
-default user name, and default fetcher:
+Here are some examples. Fetch from the default @acronym{POP} server,
+using the default user name, and default fetcher:
@lisp
(pop)
@table @code
@item :path
The name of the directory where the mails are stored. The default is
-taken from the @code{MAILDIR} environment variable or
+taken from the @env{MAILDIR} environment variable or
@file{~/Maildir/}.
@item :subdirs
The subdirectories of the Maildir. The default is
@end lisp
@item imap
-Get mail from a @sc{imap} server. If you don't want to use @sc{imap}
-as intended, as a network mail reading protocol (ie with nnimap), for
-some reason or other, Gnus let you treat it similar to a POP server
-and fetches articles from a given @sc{imap} mailbox. @xref{IMAP}, for
-more information.
+Get mail from a @acronym{IMAP} server. If you don't want to use
+@acronym{IMAP} as intended, as a network mail reading protocol (ie
+with nnimap), for some reason or other, Gnus let you treat it similar
+to a @acronym{POP} server and fetches articles from a given
+@acronym{IMAP} mailbox. @xref{IMAP}, for more information.
-Note that for the Kerberos, GSSAPI, TLS/SSL and STARTTLS support you
+Note that for the Kerberos, GSSAPI, @acronym{TLS}/@acronym{SSL} and STARTTLS support you
may need external programs and libraries, @xref{IMAP}.
Keywords:
@table @code
@item :server
-The name of the @sc{imap} server. The default is taken from the
-@code{MAILHOST} environment variable.
+The name of the @acronym{IMAP} server. The default is taken from the
+@env{MAILHOST} environment variable.
@item :port
-The port number of the @sc{imap} server. The default is @samp{143}, or
-@samp{993} for TLS/SSL connections.
+The port number of the @acronym{IMAP} server. The default is @samp{143}, or
+@samp{993} for @acronym{TLS}/@acronym{SSL} connections.
@item :user
-The user name to give to the @sc{imap} server. The default is the login
+The user name to give to the @acronym{IMAP} server. The default is the login
name.
@item :password
-The password to give to the @sc{imap} server. If not specified, the user is
+The password to give to the @acronym{IMAP} server. If not specified, the user is
prompted.
@item :stream
@item :predicate
The predicate used to find articles to fetch. The default, @samp{UNSEEN
UNDELETED}, is probably the best choice for most people, but if you
-sometimes peek in your mailbox with a @sc{imap} client and mark some
+sometimes peek in your mailbox with a @acronym{IMAP} client and mark some
articles as read (or; SEEN) you might want to set this to @samp{1:*}.
Then all articles in the mailbox is fetched, no matter what. For a
complete list of predicates, see RFC 2060 section 6.4.4.
but more flags are defined in RFC 2060 section 2.3.2.
@item :dontexpunge
-If non-nil, don't remove all articles marked as deleted in the mailbox
-after finishing the fetch.
+If non-@code{nil}, don't remove all articles marked as deleted in the
+mailbox after finishing the fetch.
@end table
-An example @sc{imap} mail source:
+An example @acronym{IMAP} mail source:
@lisp
(imap :server "mail.mycorp.com"
@end lisp
@item webmail
-Get mail from a webmail server, such as @uref{www.hotmail.com},
-@uref{webmail.netscape.com}, @uref{www.netaddress.com},
-@uref{mail.yahoo..com}.
+Get mail from a webmail server, such as @uref{http://www.hotmail.com/},
+@uref{http://webmail.netscape.com/}, @uref{http://www.netaddress.com/},
+@uref{http://mail.yahoo.com/}.
-NOTE: Webmail largely depends cookies. A "one-line-cookie" patch is
+NOTE: Webmail largely depends on cookies. A "one-line-cookie" patch is
required for url "4.0pre.46".
WARNING: Mails may be lost. NO WARRANTY.
prompted.
@item :dontexpunge
-If non-nil, only fetch unread articles and don't move them to trash
-folder after finishing the fetch.
+If non-@code{nil}, only fetch unread articles and don't move them to
+trash folder after finishing the fetch.
@end table
@table @code
@item :plugged
-If non-nil, fetch the mail even when Gnus is unplugged. If you use
-directory source to get mail, you can specify it as in this example:
+If non-@code{nil}, fetch the mail even when Gnus is unplugged. If you
+use directory source to get mail, you can specify it as in this
+example:
@lisp
(setq mail-sources
@table @code
@item mail-source-crash-box
@vindex mail-source-crash-box
-File where mail will be stored while processing it. The default is
+File where mail will be stored while processing it. The default is@*
@file{~/.emacs-mail-crash-box}.
@item mail-source-delete-incoming
If non-@code{nil}, delete incoming files after handling them. If
@code{t}, delete the files immediately, if @code{nil}, never delete any
files. If a positive number, delete files older than number of days
-(This will only happen, when reveiving new mail). You may also set
+(This will only happen, when receiving new mail). You may also set
@code{mail-source-delete-incoming} to @code{nil} and call
@code{mail-source-delete-old-incoming} from a hook or interactively.
@item mail-source-delete-old-incoming-confirm
@vindex mail-source-delete-old-incoming-confirm
-If @code{non-nil}, ask for for confirmation before deleting old incoming
+If non-@code{nil}, ask for for confirmation before deleting old incoming
files. This variable only applies when
@code{mail-source-delete-incoming} is a positive number.
@item mail-source-movemail-program
@vindex mail-source-movemail-program
-If non-nil, name of program for fetching new mail. If nil,
-@code{movemail} in @var{exec-directory}.
+If non-@code{nil}, name of program for fetching new mail. If
+@code{nil}, @code{movemail} in @var{exec-directory}.
@end table
@code{nil}, the mail back ends will never attempt to fetch mail by
themselves.
-If you want to fetch mail both from your local spool as well as a POP
-mail server, you'd say something like:
+If you want to fetch mail both from your local spool as well as a
+@acronym{POP} mail server, you'd say something like:
@lisp
(setq mail-sources
@vindex nnmail-split-hook
@item nnmail-split-hook
@findex gnus-article-decode-encoded-words
-@findex RFC 1522 decoding
-@findex RFC 2047 decoding
+@cindex RFC 1522 decoding
+@cindex RFC 2047 decoding
Hook run in the buffer where the mail headers of each message is kept
just before the splitting based on these headers is done. The hook is
free to modify the buffer contents in any way it sees fit---the buffer
Let's look at an example value of this variable first:
@lisp
-;; Messages from the mailer daemon are not crossposted to any of
-;; the ordinary groups. Warnings are put in a separate group
-;; from real errors.
+;; @r{Messages from the mailer daemon are not crossposted to any of}
+;; @r{the ordinary groups. Warnings are put in a separate group}
+;; @r{from real errors.}
(| ("from" mail (| ("subject" "warn.*" "mail.warning")
"mail.misc"))
- ;; Non-error messages are crossposted to all relevant
- ;; groups, but we don't crosspost between the group for the
- ;; (ding) list and the group for other (ding) related mail.
+ ;; @r{Non-error messages are crossposted to all relevant}
+ ;; @r{groups, but we don't crosspost between the group for the}
+ ;; @r{(ding) list and the group for other (ding) related mail.}
(& (| (any "ding@@ifi\\.uio\\.no" "ding.list")
("subject" "ding" "ding.misc"))
- ;; Other mailing lists...
+ ;; @r{Other mailing lists@dots{}}
(any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
(any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
- ;; Both lists below have the same suffix, so prevent
- ;; cross-posting to mkpkg.list of messages posted only to
- ;; the bugs- list, but allow cross-posting when the
- ;; message was really cross-posted.
+ ;; @r{Both lists below have the same suffix, so prevent}
+ ;; @r{cross-posting to mkpkg.list of messages posted only to}
+ ;; @r{the bugs- list, but allow cross-posting when the}
+ ;; @r{message was really cross-posted.}
(any "bugs-mypackage@@somewhere" "mypkg.bugs")
(any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
- ;; People...
+ ;; @r{People@dots{}}
(any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
- ;; Unmatched mail goes to the catch all group.
+ ;; @r{Unmatched mail goes to the catch all group.}
"misc.misc")
@end lisp
-This variable has the format of a @dfn{split}. A split is a (possibly)
-recursive structure where each split may contain other splits. Here are
-the five possible split syntaxes:
-
-@enumerate
-
-@item
-@samp{group}: If the split is a string, that will be taken as a group
-name. Normal regexp match expansion will be done. See below for
-examples.
-
-@item
-@code{(@var{field} @var{value} @code{[-} @var{restrict}
-@code{[@dots{}]}@code{]} @var{split})}: If the split is a list, the
-first element of which is a string, then store the message as
-specified by @var{split}, if header @var{field} (a regexp) contains
-@var{value} (also a regexp). If @var{restrict} (yet another regexp)
-matches some string after @var{field} and before the end of the
-matched @var{value}, the @var{split} is ignored. If none of the
-@var{restrict} clauses match, @var{split} is processed.
-
-@item
-@code{(| @var{split}@dots{})}: If the split is a list, and the first
-element is @code{|} (vertical bar), then process each @var{split} until
-one of them matches. A @var{split} is said to match if it will cause
-the mail message to be stored in one or more groups.
-
-@item
-@code{(& @var{split}@dots{})}: If the split is a list, and the first
-element is @code{&}, then process all @var{split}s in the list.
+This variable has the format of a @dfn{split}. A split is a
+(possibly) recursive structure where each split may contain other
+splits. Here are the possible split syntaxes:
-@item
-@code{junk}: If the split is the symbol @code{junk}, then don't save
-(i.e., delete) this message. Use with extreme caution.
+@table @code
-@item
-@code{(: @var{function} @var{arg1} @var{arg2} @dots{})}: If the split is
-a list, and the first element is @code{:}, then the second element will
-be called as a function with @var{args} given as arguments. The
-function should return a @var{split}.
+@item group
+If the split is a string, that will be taken as a group name. Normal
+regexp match expansion will be done. See below for examples.
+
+@item (@var{field} @var{value} [- @var{restrict} [@dots{}] ] @var{split})
+If the split is a list, the first element of which is a string, then
+store the message as specified by @var{split}, if header @var{field}
+(a regexp) contains @var{value} (also a regexp). If @var{restrict}
+(yet another regexp) matches some string after @var{field} and before
+the end of the matched @var{value}, the @var{split} is ignored. If
+none of the @var{restrict} clauses match, @var{split} is processed.
+
+@item (| @var{split} @dots{})
+If the split is a list, and the first element is @code{|} (vertical
+bar), then process each @var{split} until one of them matches. A
+@var{split} is said to match if it will cause the mail message to be
+stored in one or more groups.
+
+@item (& @var{split} @dots{})
+If the split is a list, and the first element is @code{&}, then
+process all @var{split}s in the list.
+
+@item junk
+If the split is the symbol @code{junk}, then don't save (i.e., delete)
+this message. Use with extreme caution.
+
+@item (: @var{function} @var{arg1} @var{arg2} @dots{})
+If the split is a list, and the first element is @samp{:}, then the
+second element will be called as a function with @var{args} given as
+arguments. The function should return a @var{split}.
@cindex body split
For instance, the following function could be used to split based on the
@lisp
(defun split-on-body ()
(save-excursion
- (set-buffer " *nnmail incoming*")
- (goto-char (point-min))
- (when (re-search-forward "Some.*string" nil t)
- "string.group")))
-@end lisp
-
-The @samp{" *nnmail incoming*"} is narrowed to the message in question
-when the @code{:} function is run.
+ (save-restriction
+ (widen)
+ (goto-char (point-min))
+ (when (re-search-forward "Some.*string" nil t)
+ "string.group"))))
+@end lisp
+
+The buffer is narrowed to the message in question when @var{function}
+is run. That's why @code{(widen)} needs to be called after
+@code{save-excursion} and @code{save-restriction} in the example
+above. Also note that with the nnimap backend, message bodies will
+not be downloaded by default. You need to set
+@code{nnimap-split-download-body} to @code{t} to do that
+(@pxref{Splitting in IMAP}).
+
+@item (! @var{func} @var{split})
+If the split is a list, and the first element is @code{!}, then
+@var{split} will be processed, and @var{func} will be called as a
+function with the result of @var{split} as argument. @var{func}
+should return a split.
-@item
-@code{(! @var{func} @var{split})}: If the split is a list, and the
-first element is @code{!}, then @var{split} will be processed, and
-@var{func} will be called as a function with the result of @var{split}
-as argument. @var{func} should return a split.
-
-@item
-@code{nil}: If the split is @code{nil}, it is ignored.
+@item nil
+If the split is @code{nil}, it is ignored.
-@end enumerate
+@end table
In these splits, @var{field} must match a complete field name.
@var{value} must match a complete word according to the fundamental mode
@samp{\<} and @samp{\>} pairs.
@vindex nnmail-split-abbrev-alist
-@var{field} and @var{value} can also be lisp symbols, in that case they
-are expanded as specified by the variable
-@code{nnmail-split-abbrev-alist}. This is an alist of cons cells, where
-the @code{car} of a cell contains the key, and the @code{cdr} contains the associated
-value.
+@var{field} and @var{value} can also be Lisp symbols, in that case
+they are expanded as specified by the variable
+@code{nnmail-split-abbrev-alist}. This is an alist of cons cells,
+where the @sc{car} of a cell contains the key, and the @sc{cdr}
+contains the associated value. Predefined entries in
+@code{nnmail-split-abbrev-alist} include:
+
+@table @code
+@item from
+Matches the @samp{From}, @samp{Sender} and @samp{Resent-From} fields.
+@item to
+Matches the @samp{To}, @samp{Cc}, @samp{Apparently-To},
+@samp{Resent-To} and @samp{Resent-Cc} fields.
+@item any
+Is the union of the @code{from} and @code{to} entries.
+@end table
@vindex nnmail-split-fancy-syntax-table
@code{nnmail-split-fancy-syntax-table} is the syntax table in effect
up to @samp{\\9} will be substituted with the text matched by the
groupings 1 through 9.
+@vindex nnmail-split-fancy-match-partial-words
+@code{nnmail-split-fancy-match-partial-words} controls whether partial
+words are matched during fancy splitting.
+
+Normally, regular expressions given in @code{nnmail-split-fancy} are
+implicitly surrounded by @code{\<...\>} markers, which are word
+delimiters. If this variable is true, they are not implicitly
+surrounded by anything.
+
+@example
+(any "joe" "joemail")
+@end example
+
+In this example, messages sent from @samp{joedavis@@foo.org} will
+normally not be filed in @samp{joemail}. With
+@code{nnmail-split-fancy-match-partial-words} set to t, however, the
+match will happen. In effect, the requirement of a word boundary is
+removed and instead the match becomes more like a grep.
+
@findex nnmail-split-fancy-with-parent
@code{nnmail-split-fancy-with-parent} is a function which allows you to
split followups into the same groups their parents are in. Sometimes
messages into the right group. With this function, you only have to do
it once per thread.
-To use this feature, you have to set @code{nnmail-treat-duplicates} and
-@code{nnmail-cache-accepted-message-ids} to a non-nil value. And then
-you can include @code{nnmail-split-fancy-with-parent} using the colon
-feature, like so:
+To use this feature, you have to set @code{nnmail-treat-duplicates}
+and @code{nnmail-cache-accepted-message-ids} to a non-@code{nil}
+value. And then you can include @code{nnmail-split-fancy-with-parent}
+using the colon feature, like so:
@lisp
-(setq nnmail-treat-duplicates 'warn ; or 'delete
+(setq nnmail-treat-duplicates 'warn ; @r{or @code{delete}}
nnmail-cache-accepted-message-ids t
nnmail-split-fancy
'(| (: nnmail-split-fancy-with-parent)
- ;; other splits go here
+ ;; @r{other splits go here}
))
@end lisp
This feature works as follows: when @code{nnmail-treat-duplicates} is
-non-nil, Gnus records the message id of every message it sees in the
-file specified by the variable @code{nnmail-message-id-cache-file},
-together with the group it is in (the group is omitted for non-mail
-messages). When mail splitting is invoked, the function
-@code{nnmail-split-fancy-with-parent} then looks at the References (and
-In-Reply-To) header of each message to split and searches the file
-specified by @code{nnmail-message-id-cache-file} for the message ids.
-When it has found a parent, it returns the corresponding group name
-unless the group name matches the regexp
-@code{nnmail-split-fancy-with-parent-ignore-groups}. It is recommended
-that you set @code{nnmail-message-id-cache-length} to a somewhat higher
-number than the default so that the message ids are still in the cache.
-(A value of 5000 appears to create a file some 300 kBytes in size.)
+non-@code{nil}, Gnus records the message id of every message it sees
+in the file specified by the variable
+@code{nnmail-message-id-cache-file}, together with the group it is in
+(the group is omitted for non-mail messages). When mail splitting is
+invoked, the function @code{nnmail-split-fancy-with-parent} then looks
+at the References (and In-Reply-To) header of each message to split
+and searches the file specified by @code{nnmail-message-id-cache-file}
+for the message ids. When it has found a parent, it returns the
+corresponding group name unless the group name matches the regexp
+@code{nnmail-split-fancy-with-parent-ignore-groups}. It is
+recommended that you set @code{nnmail-message-id-cache-length} to a
+somewhat higher number than the default so that the message ids are
+still in the cache. (A value of 5000 appears to create a file some
+300 kBytes in size.)
@vindex nnmail-cache-accepted-message-ids
When @code{nnmail-cache-accepted-message-ids} is non-@code{nil}, Gnus
also records the message ids of moved articles, so that the followup
Also see the variable @code{nnmail-cache-ignore-groups} if you don't
want certain groups to be recorded in the cache. For example, if all
-outgoing messages are written to an `outgoing' group, you could set
+outgoing messages are written to an ``outgoing'' group, you could set
@code{nnmail-cache-ignore-groups} to match that group name.
Otherwise, answers to all your messages would end up in the
-`outgoing' group.
+``outgoing'' group.
@node Group Mail Splitting
@findex gnus-group-split
If you subscribe to dozens of mailing lists but you don't want to
maintain mail splitting rules manually, group mail splitting is for you.
-You just have to set @var{to-list} and/or @var{to-address} in group
+You just have to set @code{to-list} and/or @code{to-address} in group
parameters or group customization and set @code{nnmail-split-methods} to
@code{gnus-group-split}. This splitting function will scan all groups
for those parameters and split mail accordingly, i.e., messages posted
-from or to the addresses specified in the parameters @var{to-list} or
-@var{to-address} of a mail group will be stored in that group.
+from or to the addresses specified in the parameters @code{to-list} or
+@code{to-address} of a mail group will be stored in that group.
Sometimes, mailing lists have multiple addresses, and you may want mail
-splitting to recognize them all: just set the @var{extra-aliases} group
+splitting to recognize them all: just set the @code{extra-aliases} group
parameter to the list of additional addresses and it's done. If you'd
-rather use a regular expression, set @var{split-regexp}.
+rather use a regular expression, set @code{split-regexp}.
All these parameters in a group will be used to create an
@code{nnmail-split-fancy} split, in which the @var{field} is @samp{any},
the @var{value} is a single regular expression that matches
-@var{to-list}, @var{to-address}, all of @var{extra-aliases} and all
-matches of @var{split-regexp}, and the @var{split} is the name of the
+@code{to-list}, @code{to-address}, all of @code{extra-aliases} and all
+matches of @code{split-regexp}, and the @var{split} is the name of the
group. @var{restrict}s are also supported: just set the
-@var{split-exclude} parameter to a list of regular expressions.
+@code{split-exclude} parameter to a list of regular expressions.
If you can't get the right split to be generated using all these
parameters, or you just need something fancier, you can set the
-parameter @var{split-spec} to an @code{nnmail-split-fancy} split. In
+parameter @code{split-spec} to an @code{nnmail-split-fancy} split. In
this case, all other aforementioned parameters will be ignored by
-@code{gnus-group-split}. In particular, @var{split-spec} may be set to
+@code{gnus-group-split}. In particular, @code{split-spec} may be set to
@code{nil}, in which case the group will be ignored by
@code{gnus-group-split}.
by defining a single @code{&} fancy split containing one split for each
group. If a message doesn't match any split, it will be stored in the
group named in @code{gnus-group-split-default-catch-all-group}, unless
-some group has @var{split-spec} set to @code{catch-all}, in which case
+some group has @code{split-spec} set to @code{catch-all}, in which case
that group is used as the catch-all group. Even though this variable is
often used just to name a group, it may also be set to an arbitrarily
complex fancy split (after all, a group name is a fancy split), and this
splits like this:
@lisp
-(: gnus-group-split-fancy GROUPS NO-CROSSPOST CATCH-ALL)
+(: gnus-group-split-fancy @var{groups} @var{no-crosspost} @var{catch-all})
@end lisp
@var{groups} may be a regular expression or a list of group names whose
parameters will be scanned to generate the output split.
@var{no-crosspost} can be used to disable cross-posting; in this case, a
-single @code{|} split will be output. @var{catch-all} is the fallback
-fancy split, used like @var{gnus-group-split-default-catch-all-group}.
-If @var{catch-all} is @code{nil}, or if @var{split-regexp} matches the
+single @code{|} split will be output. @var{catch-all} is the fall back
+fancy split, used like @code{gnus-group-split-default-catch-all-group}.
+If @var{catch-all} is @code{nil}, or if @code{split-regexp} matches the
empty string in any selected group, no catch-all split will be issued.
-Otherwise, if some group has @var{split-spec} set to @code{catch-all},
+Otherwise, if some group has @code{split-spec} set to @code{catch-all},
this group will override the value of the @var{catch-all} argument.
@findex gnus-group-split-setup
@code{nnmail-split-fancy} manually. You can do it by running
@code{gnus-group-split-update}. If you'd rather have it updated
automatically, just tell @code{gnus-group-split-setup} to do it for
-you. For example, add to your @file{.gnus.el}:
+you. For example, add to your @file{~/.gnus.el}:
@lisp
-(gnus-group-split-setup AUTO-UPDATE CATCH-ALL)
+(gnus-group-split-setup @var{auto-update} @var{catch-all})
@end lisp
If @var{auto-update} is non-@code{nil}, @code{gnus-group-split-update}
course.
To make Gnus get rid of your unwanted mail, you have to mark the
-articles as @dfn{expirable}. (With the default keybindings, this means
+articles as @dfn{expirable}. (With the default key bindings, this means
that you have to type @kbd{E}.) This does not mean that the articles
will disappear right away, however. In general, a mail article will be
deleted from your system if, 1) it is marked as expirable, AND 2) it is
NOT mark articles as EXPIRABLE, Gnus will NEVER delete those ARTICLES.
You do not have to mark articles as expirable by hand. Gnus provides
-two features, called `auto-expire' and `total-expire', that can help you
-with this. In a nutshell, `auto-expire' means that Gnus hits @kbd{E}
-for you when you select an article. And `total-expire' means that Gnus
+two features, called ``auto-expire'' and ``total-expire'', that can help you
+with this. In a nutshell, ``auto-expire'' means that Gnus hits @kbd{E}
+for you when you select an article. And ``total-expire'' means that Gnus
considers all articles as expirable that are read. So, in addition to
the articles marked @samp{E}, also the articles marked @samp{r},
@samp{R}, @samp{O}, @samp{K}, @samp{Y} and so on are considered
the articles that are supposed to stick around, you can still choose
between tick and dormant and read marks. But with total-expire, you
only have dormant and ticked to choose from. The advantage of
-total-expire is that it works well with adaptive scoring @pxref{Adaptive
-Scoring}. Auto-expire works with normal scoring but not with adaptive
+total-expire is that it works well with adaptive scoring (@pxref{Adaptive
+Scoring}). Auto-expire works with normal scoring but not with adaptive
scoring.
@vindex gnus-auto-expirable-newsgroups
articles you read as expirable, no matter if they were read or unread
before. To avoid having articles marked as read marked as expirable
automatically, you can put something like the following in your
-@file{.gnus.el} file:
+@file{~/.gnus.el} file:
@vindex gnus-mark-article-hook
@lisp
string (which should be the name of the group the message should be
moved to), or a function (which will be called in a buffer narrowed to
the message in question, and with the name of the group being moved
-from as its parameter) which should return a target -- either a group
+from as its parameter) which should return a target---either a group
name or @code{delete}.
Here's an example for specifying a group name:
With this setup, any mail that has @code{IMPORTANT} in its Subject
header and was sent in the year @code{YYYY} and month @code{MMM}, will
-get expired to the group @code{nnfolder:IMPORTANT.YYYY.MMM}. If its
+get expired to the group @code{nnfolder:IMPORTANT.YYYY.MMM}. If its
From or To header contains the string @code{boss}, it will get expired
-to @code{nnfolder:Work}. All other mail will get expired to
+to @code{nnfolder:Work}. All other mail will get expired to
@code{nnfolder:Archive-YYYY}.
@vindex nnmail-keep-last-article
@lisp
(setq nnmail-split-fancy
- '(| ;; Messages duplicates go to a separate group.
- ("gnus-warning" "duplicat\\(e\\|ion\\) of message" "duplicate")
- ;; Message from daemons, postmaster, and the like to another.
- (any mail "mail.misc")
- ;; Other rules.
- [ ... ] ))
+ '(| ;; @r{Messages duplicates go to a separate group.}
+ ("gnus-warning" "duplicat\\(e\\|ion\\) of message" "duplicate")
+ ;; @r{Message from daemons, postmaster, and the like to another.}
+ (any mail "mail.misc")
+ ;; @r{Other rules.}
+ [...] ))
@end lisp
-
+@noindent
Or something like:
@lisp
(setq nnmail-split-methods
'(("duplicates" "^Gnus-Warning:.*duplicate")
- ;; Other rules.
+ ;; @r{Other rules.}
[...]))
@end lisp
@vindex nnmh-get-new-mail
@vindex nnfolder-get-new-mail
This might be too much, if, for instance, you are reading mail quite
-happily with @code{nnml} and just want to peek at some old @sc{rmail}
+happily with @code{nnml} and just want to peek at some old Rmail
file you have stashed away with @code{nnbabyl}. All back ends have
variables called back-end-@code{get-new-mail}. If you want to disable
the @code{nnbabyl} mail reading, you edit the virtual server for the
@menu
* Unix Mail Box:: Using the (quite) standard Un*x mbox.
-* Rmail Babyl:: Emacs programs use the rmail babyl format.
+* Rmail Babyl:: Emacs programs use the Rmail Babyl format.
* Mail Spool:: Store your mail in a private spool?
* MH Spool:: An mhspool-like back end.
* Maildir:: Another one-file-per-message format.
@node Rmail Babyl
@subsubsection Rmail Babyl
@cindex nnbabyl
-@cindex rmail mbox
+@cindex Rmail mbox
@vindex nnbabyl-active-file
@vindex nnbabyl-mbox-file
-The @dfn{nnbabyl} back end will use a babyl mail box (aka. @dfn{rmail
+The @dfn{nnbabyl} back end will use a Babyl mail box (aka. @dfn{Rmail
mbox}) to store mail. @code{nnbabyl} will add extra headers to each
mail article to say which group it belongs in.
@table @code
@item nnbabyl-mbox-file
@vindex nnbabyl-mbox-file
-The name of the rmail mbox file. The default is @file{~/RMAIL}
+The name of the Rmail mbox file. The default is @file{~/RMAIL}
@item nnbabyl-active-file
@vindex nnbabyl-active-file
@node Mail Spool
@subsubsection Mail Spool
@cindex nnml
-@cindex mail @sc{nov} spool
+@cindex mail @acronym{NOV} spool
The @dfn{nnml} spool mail format isn't compatible with any other known
format. It should be used with some caution.
@code{nnml} is probably the slowest back end when it comes to article
splitting. It has to create lots of files, and it also generates
-@sc{nov} databases for the incoming mails. This makes it possibly the
+@acronym{NOV} databases for the incoming mails. This makes it possibly the
fastest back end when it comes to reading mail.
@cindex self contained nnml servers
@item nnml-nov-is-evil
@vindex nnml-nov-is-evil
-If non-@code{nil}, this back end will ignore any @sc{nov} files. The
+If non-@code{nil}, this back end will ignore any @acronym{NOV} files. The
default is @code{nil}.
@item nnml-nov-file-name
@vindex nnml-nov-file-name
-The name of the @sc{nov} files. The default is @file{.overview}.
+The name of the @acronym{NOV} files. The default is @file{.overview}.
@item nnml-prepare-save-mail-hook
@vindex nnml-prepare-save-mail-hook
@end table
@findex nnml-generate-nov-databases
-If your @code{nnml} groups and @sc{nov} files get totally out of whack,
-you can do a complete update by typing @kbd{M-x
+If your @code{nnml} groups and @acronym{NOV} files get totally out of
+whack, you can do a complete update by typing @kbd{M-x
nnml-generate-nov-databases}. This command will trawl through the
entire @code{nnml} hierarchy, looking at each and every article, so it
might take a while to complete. A better interface to this
@cindex mh-e mail spool
@code{nnmh} is just like @code{nnml}, except that is doesn't generate
-@sc{nov} databases and it doesn't keep an active file or marks file.
-This makes @code{nnmh} a @emph{much} slower back end than @code{nnml},
-but it also makes it easier to write procmail scripts for.
+@acronym{NOV} databases and it doesn't keep an active file or marks
+file. This makes @code{nnmh} a @emph{much} slower back end than
+@code{nnml}, but it also makes it easier to write procmail scripts
+for.
Virtual server settings:
@item nnmh-be-safe
@vindex nnmh-be-safe
If non-@code{nil}, @code{nnmh} will go to ridiculous lengths to make
-sure that the articles in the folder are actually what Gnus thinks they
-are. It will check date stamps and stat everything in sight, so
+sure that the articles in the folder are actually what Gnus thinks
+they are. It will check date stamps and stat everything in sight, so
setting this to @code{t} will mean a serious slow-down. If you never
-use anything but Gnus to read the @code{nnmh} articles, you do not have
-to set this variable to @code{t}. The default is @code{nil}.
+use anything but Gnus to read the @code{nnmh} articles, you do not
+have to set this variable to @code{t}. The default is @code{nil}.
@end table
@code{nnmaildir} stores mail in the maildir format, with each maildir
corresponding to a group in Gnus. This format is documented here:
@uref{http://cr.yp.to/proto/maildir.html} and here:
-@uref{http://www.qmail.org/man/man5/maildir.html}. nnmaildir also
-stores extra information in the @file{.nnmaildir/} directory within a
-maildir.
+@uref{http://www.qmail.org/man/man5/maildir.html}. @code{nnmaildir}
+also stores extra information in the @file{.nnmaildir/} directory
+within a maildir.
Maildir format was designed to allow concurrent deliveries and
-reading, without needing locks. With other backends, you would have
+reading, without needing locks. With other back ends, you would have
your mail delivered to a spool of some kind, and then you would
configure Gnus to split mail from that spool into your groups. You
-can still do that with nnmaildir, but the more common configuration is
-to have your mail delivered directly to the maildirs that appear as
-group in Gnus.
+can still do that with @code{nnmaildir}, but the more common
+configuration is to have your mail delivered directly to the maildirs
+that appear as group in Gnus.
-nnmaildir is designed to be perfectly reliable: @kbd{C-g} will never
-corrupt its data in memory, and @code{SIGKILL} will never corrupt its
-data in the filesystem.
+@code{nnmaildir} is designed to be perfectly reliable: @kbd{C-g} will
+never corrupt its data in memory, and @code{SIGKILL} will never
+corrupt its data in the filesystem.
-nnmaildir stores article marks and NOV data in each maildir. So you
-can copy a whole maildir from one Gnus setup to another, and you will
-keep your marks.
+@code{nnmaildir} stores article marks and @acronym{NOV} data in each
+maildir. So you can copy a whole maildir from one Gnus setup to
+another, and you will keep your marks.
Virtual server settings:
@table @code
@item directory
-For each of your nnmaildir servers (it's very unlikely that you'd need
-more than one), you need to create a directory and populate it with
-maildirs or symlinks to maildirs (and nothing else; do not choose a
-directory already used for other purposes). Each maildir will be
-represented in Gnus as a newsgroup on that server; the filename of the
-symlink will be the name of the group. Any filenames in the directory
-starting with `.' are ignored. The directory is scanned when you
-first start Gnus, and each time you type @kbd{g} in the group buffer;
-if any maildirs have been removed or added, nnmaildir notices at these
-times.
+For each of your @code{nnmaildir} servers (it's very unlikely that
+you'd need more than one), you need to create a directory and populate
+it with maildirs or symlinks to maildirs (and nothing else; do not
+choose a directory already used for other purposes). Each maildir
+will be represented in Gnus as a newsgroup on that server; the
+filename of the symlink will be the name of the group. Any filenames
+in the directory starting with @samp{.} are ignored. The directory is
+scanned when you first start Gnus, and each time you type @kbd{g} in
+the group buffer; if any maildirs have been removed or added,
+@code{nnmaildir} notices at these times.
The value of the @code{directory} parameter should be a Lisp form
which is processed by @code{eval} and @code{expand-file-name} to get
the path of the directory for this server. The form is @code{eval}ed
only when the server is opened; the resulting string is used until the
server is closed. (If you don't know about forms and @code{eval},
-don't worry - a simple string will work.) This parameter is not
+don't worry---a simple string will work.) This parameter is not
optional; you must specify it. I don't recommend using
@code{"~/Mail"} or a subdirectory of it; several other parts of Gnus
use that directory by default for various things, and may get confused
-if nnmaildir uses it too. @code{"~/.nnmaildir"} is a typical value.
+if @code{nnmaildir} uses it too. @code{"~/.nnmaildir"} is a typical
+value.
@item target-prefix
This should be a Lisp form which is processed by @code{eval} and
server is opened; the resulting string is used until the server is
closed.
-When you create a group on an nnmaildir server, the maildir is created
-with @code{target-prefix} prepended to its name, and a symlink
+When you create a group on an @code{nnmaildir} server, the maildir is
+created with @code{target-prefix} prepended to its name, and a symlink
pointing to that maildir is created, named with the plain group name.
So if @code{directory} is @code{"~/.nnmaildir"} and
@code{target-prefix} is @code{"../maildirs/"}, then when you create
-the group @code{foo}, nnmaildir will create
+the group @code{foo}, @code{nnmaildir} will create
@file{~/.nnmaildir/../maildirs/foo} as a maildir, and will create
@file{~/.nnmaildir/foo} as a symlink pointing to
@file{../maildirs/foo}.
value is @code{nil}.
Do @emph{not} use the same maildir both in @code{mail-sources} and as
-an nnmaildir group. The results might happen to be useful, but that
-would be by chance, not by design, and the results might be different
-in the future. If your split rules create new groups, remember to
-supply a @code{create-directory} server parameter.
+an @code{nnmaildir} group. The results might happen to be useful, but
+that would be by chance, not by design, and the results might be
+different in the future. If your split rules create new groups,
+remember to supply a @code{create-directory} server parameter.
@end table
@subsubsection Group parameters
-nnmaildir uses several group parameters. It's safe to ignore all
-this; the default behavior for nnmaildir is the same as the default
-behavior for other mail backends: articles are deleted after one week,
-etc. Except for the expiry parameters, all this functionality is
-unique to nnmaildir, so you can ignore it if you're just trying to
-duplicate the behavior you already have with another backend.
+@code{nnmaildir} uses several group parameters. It's safe to ignore
+all this; the default behavior for @code{nnmaildir} is the same as the
+default behavior for other mail back ends: articles are deleted after
+one week, etc. Except for the expiry parameters, all this
+functionality is unique to @code{nnmaildir}, so you can ignore it if
+you're just trying to duplicate the behavior you already have with
+another back end.
If the value of any of these parameters is a vector, the first element
is evaluated as a Lisp form and the result is used, rather than the
original value. If the value is not a vector, the value itself is
evaluated as a Lisp form. (This is why these parameters use names
different from those of other, similar parameters supported by other
-backends: they have different, though similar, meanings.) (For
+back ends: they have different, though similar, meanings.) (For
numbers, strings, @code{nil}, and @code{t}, you can ignore the
@code{eval} business again; for other values, remember to use an extra
quote and wrap the value in a vector when appropriate.)
@table @code
@item expire-age
-An integer specifying the minimum age, in seconds, of an article before
-it will be expired, or the symbol @code{never} to specify that
+An integer specifying the minimum age, in seconds, of an article
+before it will be expired, or the symbol @code{never} to specify that
articles should never be expired. If this parameter is not set,
-nnmaildir falls back to the usual
-@code{nnmail-expiry-wait}(@code{-function}) variables (overridable by
+@code{nnmaildir} falls back to the usual
+@code{nnmail-expiry-wait}(@code{-function}) variables (overrideable by
the @code{expiry-wait}(@code{-function}) group parameters. If you
wanted a value of 3 days, you could use something like @code{[(* 3 24
-60 60)]}; nnmaildir will evaluate the form and use the result. An
-article's age is measured starting from the article file's
+60 60)]}; @code{nnmaildir} will evaluate the form and use the result.
+An article's age is measured starting from the article file's
modification time. Normally, this is the same as the article's
delivery time, but editing an article makes it younger. Moving an
article (other than via expiry) may also make an article younger.
@item expire-group
-If this is set to a string (a full Gnus group name, like
-@code{"backend+server.address.string:group.name"}), and if it is not
-the name of the same group that the parameter belongs to, then
-articles will be moved to the specified group during expiry before
-being deleted. @emph{If this is set to an nnmaildir group, the
-article will be just as old in the destination group as it was in the
-source group.} So be careful with @code{expire-age} in the
+If this is set to a string such as a full Gnus group name, like
+@example
+"backend+server.address.string:group.name"
+@end example
+and if it is not the name of the same group that the parameter belongs
+to, then articles will be moved to the specified group during expiry
+before being deleted. @emph{If this is set to an @code{nnmaildir}
+group, the article will be just as old in the destination group as it
+was in the source group.} So be careful with @code{expire-age} in the
destination group. If this is set to the name of the same group that
the parameter belongs to, then the article is not expired at all. If
you use the vector form, the first element is evaluated once for each
article. So that form can refer to
@code{nnmaildir-article-file-name}, etc., to decide where to put the
-article. @emph{If this parameter is not set, nnmaildir does not fall
-back to the @code{expiry-target} group parameter or the
+article. @emph{If this parameter is not set, @code{nnmaildir} does
+not fall back to the @code{expiry-target} group parameter or the
@code{nnmail-expiry-target} variable.}
@item read-only
-If this is set to @code{t}, nnmaildir will treat the articles in this
-maildir as read-only. This means: articles are not renamed from
-@file{new/} into @file{cur/}; articles are only found in @file{new/},
-not @file{cur/}; articles are never deleted; articles cannot be
-edited. @file{new/} is expected to be a symlink to the @file{new/}
-directory of another maildir - e.g., a system-wide mailbox containing
-a mailing list of common interest. Everything in the maildir outside
-@file{new/} is @emph{not} treated as read-only, so for a shared
-mailbox, you do still need to set up your own maildir (or have write
-permission to the shared mailbox); your maildir just won't contain
-extra copies of the articles.
+If this is set to @code{t}, @code{nnmaildir} will treat the articles
+in this maildir as read-only. This means: articles are not renamed
+from @file{new/} into @file{cur/}; articles are only found in
+@file{new/}, not @file{cur/}; articles are never deleted; articles
+cannot be edited. @file{new/} is expected to be a symlink to the
+@file{new/} directory of another maildir---e.g., a system-wide mailbox
+containing a mailing list of common interest. Everything in the
+maildir outside @file{new/} is @emph{not} treated as read-only, so for
+a shared mailbox, you do still need to set up your own maildir (or
+have write permission to the shared mailbox); your maildir just won't
+contain extra copies of the articles.
@item directory-files
A function with the same interface as @code{directory-files}. It is
server's @code{directory-files} parameter.
@item distrust-Lines:
-If non-@code{nil}, nnmaildir will always count the lines of an
+If non-@code{nil}, @code{nnmaildir} will always count the lines of an
article, rather than use the @code{Lines:} header field. If
@code{nil}, the header field will be used if present.
@item always-marks
-A list of mark symbols, such as
-@code{['(read expire)]}. Whenever Gnus asks nnmaildir for
-article marks, nnmaildir will say that all articles have these
-marks, regardless of whether the marks stored in the filesystem
-say so. This is a proof-of-concept feature that will probably be
-removed eventually; it ought to be done in Gnus proper, or
-abandoned if it's not worthwhile.
+A list of mark symbols, such as @code{['(read expire)]}. Whenever
+Gnus asks @code{nnmaildir} for article marks, @code{nnmaildir} will
+say that all articles have these marks, regardless of whether the
+marks stored in the filesystem say so. This is a proof-of-concept
+feature that will probably be removed eventually; it ought to be done
+in Gnus proper, or abandoned if it's not worthwhile.
@item never-marks
A list of mark symbols, such as @code{['(tick expire)]}. Whenever
-Gnus asks nnmaildir for article marks, nnmaildir will say that no
-articles have these marks, regardless of whether the marks stored in
-the filesystem say so. @code{never-marks} overrides
+Gnus asks @code{nnmaildir} for article marks, @code{nnmaildir} will
+say that no articles have these marks, regardless of whether the marks
+stored in the filesystem say so. @code{never-marks} overrides
@code{always-marks}. This is a proof-of-concept feature that will
probably be removed eventually; it ought to be done in Gnus proper, or
abandoned if it's not worthwhile.
@item nov-cache-size
-An integer specifying the size of the NOV memory cache. To speed
-things up, nnmaildir keeps NOV data in memory for a limited number of
-articles in each group. (This is probably not worthwhile, and will
-probably be removed in the future.) This parameter's value is noticed
-only the first time a group is seen after the server is opened - i.e.,
-when you first start Gnus, typically. The NOV cache is never resized
-until the server is closed and reopened. The default is an estimate
-of the number of articles that would be displayed in the summary
-buffer: a count of articles that are either marked with @code{tick} or
-not marked with @code{read}, plus a little extra.
+An integer specifying the size of the @acronym{NOV} memory cache. To
+speed things up, @code{nnmaildir} keeps @acronym{NOV} data in memory
+for a limited number of articles in each group. (This is probably not
+worthwhile, and will probably be removed in the future.) This
+parameter's value is noticed only the first time a group is seen after
+the server is opened---i.e., when you first start Gnus, typically.
+The @acronym{NOV} cache is never resized until the server is closed
+and reopened. The default is an estimate of the number of articles
+that would be displayed in the summary buffer: a count of articles
+that are either marked with @code{tick} or not marked with
+@code{read}, plus a little extra.
@end table
@subsubsection Article identification
Articles are stored in the @file{cur/} subdirectory of each maildir.
Each article file is named like @code{uniq:info}, where @code{uniq}
-contains no colons. nnmaildir ignores, but preserves, the
+contains no colons. @code{nnmaildir} ignores, but preserves, the
@code{:info} part. (Other maildir readers typically use this part of
the filename to store marks.) The @code{uniq} part uniquely
identifies the article, and is used in various places in the
request the article in the summary buffer.
@subsubsection NOV data
-An article identified by @code{uniq} has its NOV data (used to
-generate lines in the summary buffer) stored in
+An article identified by @code{uniq} has its @acronym{NOV} data (used
+to generate lines in the summary buffer) stored in
@code{.nnmaildir/nov/uniq}. There is no
@code{nnmaildir-generate-nov-databases} function. (There isn't much
-need for it - an article's NOV data is updated automatically when the
-article or @code{nnmail-extra-headers} has changed.) You can force
-nnmaildir to regenerate the NOV data for a single article simply by
-deleting the corresponding NOV file, but @emph{beware}: this will also
-cause nnmaildir to assign a new article number for this article, which
-may cause trouble with @code{seen} marks, the Agent, and the cache.
+need for it---an article's @acronym{NOV} data is updated automatically
+when the article or @code{nnmail-extra-headers} has changed.) You can
+force @code{nnmaildir} to regenerate the @acronym{NOV} data for a
+single article simply by deleting the corresponding @acronym{NOV}
+file, but @emph{beware}: this will also cause @code{nnmaildir} to
+assign a new article number for this article, which may cause trouble
+with @code{seen} marks, the Agent, and the cache.
@subsubsection Article marks
An article identified by @code{uniq} is considered to have the mark
@code{flag} when the file @file{.nnmaildir/marks/flag/uniq} exists.
-When Gnus asks nnmaildir for a group's marks, nnmaildir looks for such
-files and reports the set of marks it finds. When Gnus asks nnmaildir
-to store a new set of marks, nnmaildir creates and deletes the
-corresponding files as needed. (Actually, rather than create a new
-file for each mark, it just creates hard links to
-@file{.nnmaildir/markfile}, to save inodes.)
+When Gnus asks @code{nnmaildir} for a group's marks, @code{nnmaildir}
+looks for such files and reports the set of marks it finds. When Gnus
+asks @code{nnmaildir} to store a new set of marks, @code{nnmaildir}
+creates and deletes the corresponding files as needed. (Actually,
+rather than create a new file for each mark, it just creates hard
+links to @file{.nnmaildir/markfile}, to save inodes.)
You can invent new marks by creating a new directory in
@file{.nnmaildir/marks/}. You can tar up a maildir and remove it from
your server, untar it later, and keep your marks. You can add and
remove marks yourself by creating and deleting mark files. If you do
-this while Gnus is running and your nnmaildir server is open, it's
-best to exit all summary buffers for nnmaildir groups and type @kbd{s}
-in the group buffer first, and to type @kbd{g} or @kbd{M-g} in the
-group buffer afterwards. Otherwise, Gnus might not pick up the
-changes, and might undo them.
+this while Gnus is running and your @code{nnmaildir} server is open,
+it's best to exit all summary buffers for @code{nnmaildir} groups and
+type @kbd{s} in the group buffer first, and to type @kbd{g} or
+@kbd{M-g} in the group buffer afterwards. Otherwise, Gnus might not
+pick up the changes, and might undo them.
@node Mail Folders
@cindex mbox folders
@cindex mail folders
-@code{nnfolder} is a back end for storing each mail group in a separate
-file. Each file is in the standard Un*x mbox format. @code{nnfolder}
-will add extra headers to keep track of article numbers and arrival
-dates.
+@code{nnfolder} is a back end for storing each mail group in a
+separate file. Each file is in the standard Un*x mbox format.
+@code{nnfolder} will add extra headers to keep track of article
+numbers and arrival dates.
@cindex self contained nnfolder servers
@cindex marks
proper @code{nnfolder} server) and have all your marks be preserved.
Marks for a group is usually stored in a file named as the mbox file
with @code{.mrk} concatenated to it (but see
-@code{nnfolder-marks-file-suffix}) within the @code{nnfolder} directory.
-Individual @code{nnfolder} groups are also possible to backup, use
-@kbd{G m} to restore the group (after restoring the backup into the
-@code{nnfolder} directory).
+@code{nnfolder-marks-file-suffix}) within the @code{nnfolder}
+directory. Individual @code{nnfolder} groups are also possible to
+backup, use @kbd{G m} to restore the group (after restoring the backup
+into the @code{nnfolder} directory).
Virtual server settings:
@table @code
@item nnfolder-directory
@vindex nnfolder-directory
-All the @code{nnfolder} mail boxes will be stored under this directory.
-The default is the value of @code{message-directory} (whose default is
-@file{~/Mail})
+All the @code{nnfolder} mail boxes will be stored under this
+directory. The default is the value of @code{message-directory}
+(whose default is @file{~/Mail})
@item nnfolder-active-file
@vindex nnfolder-active-file
@item nnfolder-get-new-mail
@vindex nnfolder-get-new-mail
-If non-@code{nil}, @code{nnfolder} will read incoming mail. The default
-is @code{t}
+If non-@code{nil}, @code{nnfolder} will read incoming mail. The
+default is @code{t}
@item nnfolder-save-buffer-hook
@vindex nnfolder-save-buffer-hook
@cindex backup files
Hook run before saving the folders. Note that Emacs does the normal
-backup renaming of files even with the @code{nnfolder} buffers. If you
-wish to switch this off, you could say something like the following in
-your @file{.emacs} file:
+backup renaming of files even with the @code{nnfolder} buffers. If
+you wish to switch this off, you could say something like the
+following in your @file{.emacs} file:
@lisp
(defun turn-off-backup ()
@item nnfolder-nov-is-evil
@vindex nnfolder-nov-is-evil
-If non-@code{nil}, this back end will ignore any @sc{nov} files. The
+If non-@code{nil}, this back end will ignore any @acronym{NOV} files. The
default is @code{nil}.
@item nnfolder-nov-file-suffix
@vindex nnfolder-nov-file-suffix
-The extension for @sc{nov} files. The default is @file{.nov}.
+The extension for @acronym{NOV} files. The default is @file{.nov}.
@item nnfolder-nov-directory
@vindex nnfolder-nov-directory
-The directory where the @sc{nov} files should be stored. If nil,
-@code{nnfolder-directory} is used.
+The directory where the @acronym{NOV} files should be stored. If
+@code{nil}, @code{nnfolder-directory} is used.
@item nnfolder-marks-is-evil
@vindex nnfolder-marks-is-evil
@item nnfolder-marks-directory
@vindex nnfolder-marks-directory
-The directory where the @sc{marks} files should be stored. If nil,
-@code{nnfolder-directory} is used.
+The directory where the @sc{marks} files should be stored. If
+@code{nil}, @code{nnfolder-directory} is used.
@end table
mail within spitting distance of Gnus.
The same concept exists for Usenet itself: Though access to articles is
-typically done by @sc{nntp} these days, once upon a midnight dreary, everyone
+typically done by @acronym{NNTP} these days, once upon a midnight dreary, everyone
in the world got at Usenet by running a reader on the machine where the
-articles lay (the machine which today we call an @sc{nntp} server), and
+articles lay (the machine which today we call an @acronym{NNTP} server), and
access was by the reader stepping into the articles' directory spool
area directly. One can still select between either the @code{nntp} or
@code{nnspool} back ends, to select between these methods, if one happens
format to which mail was converted, primarily involving creating a
spool-file-like entity with a scheme for inserting Babyl-specific
headers and status bits above the top of each message in the file.
-RMAIL was Emacs' first mail reader, it was written by Richard Stallman,
-and Stallman came out of that TOPS/Babyl environment, so he wrote RMAIL
+Rmail was Emacs' first mail reader, it was written by Richard Stallman,
+and Stallman came out of that TOPS/Babyl environment, so he wrote Rmail
to understand the mail files folks already had in existence. Gnus (and
VM, for that matter) continue to support this format because it's
perceived as having some good qualities in those mailer-specific
-headers/status bits stuff. RMAIL itself still exists as well, of
+headers/status bits stuff. Rmail itself still exists as well, of
course, and is still maintained by Stallman.
Both of the above forms leave your mail in a single file on your
CNews-based news system in (for instance) @file{/var/lib/news/active},
or what is returned via the @samp{NNTP LIST} verb) and also creates
@dfn{overview} files for efficient group entry, as has been defined for
-@sc{nntp} servers for some years now. It is slower in mail-splitting,
+@acronym{NNTP} servers for some years now. It is slower in mail-splitting,
due to the creation of lots of files, updates to the @code{nnml} active
file, and additions to overview files on a per-message basis, but it is
extremely fast on access because of what amounts to the indexing support
The Rand MH mail-reading system has been around UNIX systems for a very
long time; it operates by splitting one's spool file of messages into
-individual files, but with little or no indexing support -- @code{nnmh}
+individual files, but with little or no indexing support---@code{nnmh}
is considered to be semantically equivalent to ``@code{nnml} without
active file or overviews''. This is arguably the worst choice, because
one gets the slowness of individual file creation married to the
also stores the equivalent of @code{nnml}'s overview files in one file
per article, so it uses about twice as many inodes as @code{nnml}. (Use
@code{df -i} to see how plentiful your inode supply is.) If this slows
-you down or takes up very much space, consider switching to ReiserFS
-(@uref{http://www.namesys.com/}) or another non-block-structured
+you down or takes up very much space, consider switching to
+@uref{http://www.namesys.com/, ReiserFS} or another non-block-structured
file system.
Since maildirs don't require locking for delivery, the maildirs you use
as groups can also be the maildirs your mail is directly delivered to.
-This means you can skip Gnus's mail splitting if your mail is already
+This means you can skip Gnus' mail splitting if your mail is already
organized into different mailboxes during delivery. A @code{directory}
entry in @code{mail-sources} would have a similar effect, but would
require one set of mailboxes for spooling deliveries (in mbox format,
interfaces to these sources.
@menu
-* Archiving Mail::
+* Archiving Mail::
* Web Searches:: Creating groups from articles that match a string.
* Slashdot:: Reading the Slashdot comments.
* Ultimate:: The Ultimate Bulletin Board systems.
All the web sources require Emacs/w3 and the url library to work.
The main caveat with all these web sources is that they probably won't
-work for a very long time. Gleaning information from the @sc{html} data
+work for a very long time. Gleaning information from the @acronym{HTML} data
is guesswork at best, and when the layout is altered, the Gnus back end
will fail. If you have reasonably new versions of these back ends,
though, you should be ok.
server, take a recursive copy of the server directory. There is no need
to shut down Gnus, so archiving may be invoked by @code{cron} or
similar. You restore the data by restoring the directory tree, and
-adding a server definition pointing to that directory in Gnus. The
+adding a server definition pointing to that directory in Gnus. The
@ref{Article Backlog}, @ref{Asynchronous Fetching} and other things
might interfere with overwriting data, so you may want to shut down Gnus
before you restore the data.
For @code{nnml} or @code{nnmaildir}, you copy all files in the group's
directory. For @code{nnfolder} you need to copy both the base folder
file itself (@file{FOO}, say), and the marks file (@file{FOO.mrk} in
-this example). Restoring the group is done with @kbd{G m} from the Group
+this example). Restoring the group is done with @kbd{G m} from the Group
buffer. The last step makes Gnus notice the new directory.
@code{nnmaildir} notices the new directory automatically, so @kbd{G m}
is unnecessary in that case.
If the search engine changes its output substantially, @code{nnweb}
won't be able to parse it and will fail. One could hardly fault the Web
-providers if they were to do this---their @emph{raison d'être} is to
+providers if they were to do this---their @emph{raison d'@^etre} is to
make money off of advertisements, not to provide services to the
community. Since @code{nnweb} washes the ads off all the articles, one
might think that the providers might be somewhat miffed. We'll see.
@item nnweb-type
@vindex nnweb-type
What search engine type is being used. The currently supported types
-are @code{google}, @code{dejanews}, and @code{gmane}. Note that
+are @code{google}, @code{dejanews}, and @code{gmane}. Note that
@code{dejanews} is an alias to @code{google}.
@item nnweb-search
@cindex Slashdot
@cindex nnslashdot
-Slashdot (@uref{http://slashdot.org/}) is a popular news site, with
+@uref{http://slashdot.org/, Slashdot} is a popular news site, with
lively discussion following the news articles. @code{nnslashdot} will
let you read this forum in a convenient manner.
The easiest way to read this source is to put something like the
-following in your @file{.gnus.el} file:
+following in your @file{~/.gnus.el} file:
@lisp
(setq gnus-secondary-select-methods
command is the most handy tool (@pxref{Foreign Groups}).
When following up to @code{nnslashdot} comments (or posting new
-comments), some light @sc{html}izations will be performed. In
+comments), some light @acronym{HTML}izations will be performed. In
particular, text quoted with @samp{> } will be quoted with
-@code{blockquote} instead, and signatures will have @code{br} added to
-the end of each line. Other than that, you can just write @sc{html}
+@samp{blockquote} instead, and signatures will have @samp{br} added to
+the end of each line. Other than that, you can just write @acronym{HTML}
directly into the message buffer. Note that Slashdot filters out some
-@sc{html} forms.
+@acronym{HTML} forms.
The following variables can be altered to change its behavior:
@item nnslashdot-active-url
@vindex nnslashdot-active-url
-The @sc{url} format string that will be used to fetch the information on
-news articles and comments. The default is
+The @acronym{URL} format string that will be used to fetch the
+information on news articles and comments. The default is@*
@samp{http://slashdot.org/search.pl?section=&min=%d}.
@item nnslashdot-comments-url
@vindex nnslashdot-comments-url
-The @sc{url} format string that will be used to fetch comments. The
-default is
-@samp{http://slashdot.org/comments.pl?sid=%s&threshold=%d&commentsort=%d&mode=flat&startat=%d}.
+The @acronym{URL} format string that will be used to fetch comments.
@item nnslashdot-article-url
@vindex nnslashdot-article-url
-The @sc{url} format string that will be used to fetch the news article. The
-default is
+The @acronym{URL} format string that will be used to fetch the news
+article. The default is
@samp{http://slashdot.org/article.pl?sid=%s&mode=nocomment}.
@item nnslashdot-threshold
@cindex nnultimate
@cindex Ultimate Bulletin Board
-The Ultimate Bulletin Board (@uref{http://www.ultimatebb.com/}) is
+@uref{http://www.ultimatebb.com/, The Ultimate Bulletin Board} is
probably the most popular Web bulletin board system used. It has a
quite regular and nice interface, and it's possible to get the
information Gnus needs to keep groups updated.
The easiest way to get started with @code{nnultimate} is to say
something like the following in the group buffer: @kbd{B nnultimate RET
-http://www.tcj.com/messboard/ubbcgi/ RET}. (Substitute the @sc{url}
+http://www.tcj.com/messboard/ubbcgi/ RET}. (Substitute the @acronym{URL}
(not including @samp{Ultimate.cgi} or the like at the end) for a forum
you're interested in; there's quite a list of them on the Ultimate web
site.) Then subscribe to the groups you're interested in from the
@table @code
@item nnultimate-directory
@vindex nnultimate-directory
-The directory where @code{nnultimate} stores its files. The default is
+The directory where @code{nnultimate} stores its files. The default is@*
@file{~/News/ultimate/}.
@end table
@findex gnus-group-make-warchive-group
The easiest way to get started with @code{nnwarchive} is to say
something like the following in the group buffer: @kbd{M-x
-gnus-group-make-warchive-group RET an_egroup RET egroups RET
-www.egroups.com RET your@@email.address RET}. (Substitute the
-@sc{an_egroup} with the mailing list you subscribed, the
-@sc{your@@email.address} with your email address.), or to browse the
+gnus-group-make-warchive-group RET @var{an_egroup} RET egroups RET
+www.egroups.com RET @var{your@@email.address} RET}. (Substitute the
+@var{an_egroup} with the mailing list you subscribed, the
+@var{your@@email.address} with your email address.), or to browse the
back end by @kbd{B nnwarchive RET mail-archive RET}.
The following @code{nnwarchive} variables can be altered:
@table @code
@item nnwarchive-directory
@vindex nnwarchive-directory
-The directory where @code{nnwarchive} stores its files. The default is
+The directory where @code{nnwarchive} stores its files. The default is@*
@file{~/News/warchive/}.
@item nnwarchive-login
@cindex nnrss
@cindex RSS
-Some sites have RDF site summary (RSS)
-@uref{http://purl.org/rss/1.0/spec}. It has a quite regular and nice
-interface, and it's possible to get the information Gnus needs to keep
-groups updated.
+Some web sites have an RDF Site Summary (@acronym{RSS}).
+@acronym{RSS} is a format for summarizing headlines from news related
+sites (such as BBC or CNN). But basically anything list-like can be
+presented as an @acronym{RSS} feed: weblogs, changelogs or recent
+changes to a wiki (e.g. @url{http://cliki.net/recent-changes.rdf}).
+
+@acronym{RSS} has a quite regular and nice interface, and it's
+possible to get the information Gnus needs to keep groups updated.
-The easiest way to get started with @code{nnrss} is to say something
-like the following in the group buffer: @kbd{B nnrss RET RET}, then
-subscribe groups.
+@kindex G R (Summary)
+Use @kbd{G R} from the summary buffer to subscribe to a feed---you
+will be prompted for the location of the feed.
+
+An easy way to get started with @code{nnrss} is to say something like
+the following in the group buffer: @kbd{B nnrss RET y}, then
+subscribe to groups.
The following @code{nnrss} variables can be altered:
The directory where @code{nnrss} stores its files. The default is
@file{~/News/rss/}.
+@item nnrss-use-local
+@vindex nnrss-use-local
+@findex nnrss-generate-download-script
+If you set @code{nnrss-use-local} to @code{t}, @code{nnrss} will read
+the feeds from local files in @code{nnrss-directory}. You can use
+the command @code{nnrss-generate-download-script} to generate a
+download script using @command{wget}.
@end table
The following code may be helpful, if you want to show the description in
@end lisp
Put that in your @file{.emacs} file, and hitting links in w3-rendered
-@sc{html} in the Gnus article buffers will use @code{browse-url} to
+@acronym{HTML} in the Gnus article buffers will use @code{browse-url} to
follow the link.
@node IMAP
@section IMAP
@cindex nnimap
-@cindex @sc{imap}
+@cindex @acronym{IMAP}
-@sc{imap} is a network protocol for reading mail (or news, or @dots{}),
-think of it as a modernized @sc{nntp}. Connecting to a @sc{imap}
+@acronym{IMAP} is a network protocol for reading mail (or news, or @dots{}),
+think of it as a modernized @acronym{NNTP}. Connecting to a @acronym{IMAP}
server is much similar to connecting to a news server, you just
specify the network address of the server.
-@sc{imap} has two properties. First, @sc{imap} can do everything that
-POP can, it can hence be viewed as a POP++. Secondly, @sc{imap} is a
-mail storage protocol, similar to @sc{nntp} being a news storage
-protocol -- however, @sc{imap} offers more features than @sc{nntp}
-because news is more or less read-only whereas mail is read-write.
+@acronym{IMAP} has two properties. First, @acronym{IMAP} can do
+everything that @acronym{POP} can, it can hence be viewed as a
+@acronym{POP++}. Secondly, @acronym{IMAP} is a mail storage protocol,
+similar to @acronym{NNTP} being a news storage protocol---however,
+@acronym{IMAP} offers more features than @acronym{NNTP} because news
+is more or less read-only whereas mail is read-write.
-If you want to use @sc{imap} as a POP++, use an imap entry in
-@code{mail-sources}. With this, Gnus will fetch mails from the
-@sc{imap} server and store them on the local disk. This is not the
-usage described in this section--@xref{Mail Sources}.
+If you want to use @acronym{IMAP} as a @acronym{POP++}, use an imap
+entry in @code{mail-sources}. With this, Gnus will fetch mails from
+the @acronym{IMAP} server and store them on the local disk. This is
+not the usage described in this section---@xref{Mail Sources}.
-If you want to use @sc{imap} as a mail storage protocol, use an nnimap
+If you want to use @acronym{IMAP} as a mail storage protocol, use an nnimap
entry in @code{gnus-secondary-select-methods}. With this, Gnus will
-manipulate mails stored on the @sc{imap} server. This is the kind of
+manipulate mails stored on the @acronym{IMAP} server. This is the kind of
usage explained in this section.
-A server configuration in @file{~/.gnus} with a few @sc{imap} servers
-might look something like the following. (Note that for TLS/SSL, you
-need external programs and libraries, see below.)
+A server configuration in @file{~/.gnus.el} with a few @acronym{IMAP}
+servers might look something like the following. (Note that for
+@acronym{TLS}/@acronym{SSL}, you need external programs and libraries,
+see below.)
@lisp
(setq gnus-secondary-select-methods
- '((nnimap "simpleserver") ; no special configuration
- ; perhaps a ssh port forwarded server:
+ '((nnimap "simpleserver") ; @r{no special configuration}
+ ; @r{perhaps a ssh port forwarded server:}
(nnimap "dolk"
(nnimap-address "localhost")
(nnimap-server-port 1430))
- ; a UW server running on localhost
+ ; @r{a UW server running on localhost}
(nnimap "barbar"
(nnimap-server-port 143)
(nnimap-address "localhost")
(nnimap-list-pattern ("INBOX" "mail/*")))
- ; anonymous public cyrus server:
+ ; @r{anonymous public cyrus server:}
(nnimap "cyrus.andrew.cmu.edu"
(nnimap-authenticator anonymous)
(nnimap-list-pattern "archive.*")
(nnimap-stream network))
- ; a ssl server on a non-standard port:
+ ; @r{a ssl server on a non-standard port:}
(nnimap "vic20"
(nnimap-address "vic20.somewhere.com")
(nnimap-server-port 9930)
@item nnimap-address
@vindex nnimap-address
-The address of the remote @sc{imap} server. Defaults to the virtual
+The address of the remote @acronym{IMAP} server. Defaults to the virtual
server name if not specified.
@item nnimap-server-port
@vindex nnimap-server-port
-Port on server to contact. Defaults to port 143, or 993 for TLS/SSL.
+Port on server to contact. Defaults to port 143, or 993 for @acronym{TLS}/@acronym{SSL}.
Note that this should be an integer, example server specification:
@vindex nnimap-list-pattern
String or list of strings of mailboxes to limit available groups to.
This is used when the server has very many mailboxes and you're only
-interested in a few -- some servers export your home directory via
-@sc{imap}, you'll probably want to limit the mailboxes to those in
+interested in a few---some servers export your home directory via
+@acronym{IMAP}, you'll probably want to limit the mailboxes to those in
@file{~/Mail/*} then.
The string can also be a cons of REFERENCE and the string as above, what
@vindex nnimap-stream
The type of stream used to connect to your server. By default, nnimap
will detect and automatically use all of the below, with the exception
-of TLS/SSL. (@sc{imap} over TLS/SSL is being replaced by STARTTLS, which
-can be automatically detected, but it's not widely deployed yet.)
+of @acronym{TLS}/@acronym{SSL}. (@acronym{IMAP} over
+@acronym{TLS}/@acronym{SSL} is being replaced by STARTTLS, which can
+be automatically detected, but it's not widely deployed yet.)
Example server specification:
@itemize @bullet
@item
-@dfn{gssapi:} Connect with GSSAPI (usually Kerberos 5). Requires the
+@dfn{gssapi:} Connect with GSSAPI (usually Kerberos 5). Requires the
@samp{gsasl} or @samp{imtest} program.
@item
-@dfn{kerberos4:} Connect with Kerberos 4. Requires the @samp{imtest} program.
+@dfn{kerberos4:} Connect with Kerberos 4. Requires the @samp{imtest} program.
@item
@dfn{starttls:} Connect via the STARTTLS extension (similar to
-TLS/SSL). Requires the external library @samp{starttls.el} and program
+@acronym{TLS}/@acronym{SSL}). Requires the external library @samp{starttls.el} and program
@samp{starttls}.
@item
-@dfn{tls:} Connect through TLS. Requires GNUTLS (the program
+@dfn{tls:} Connect through @acronym{TLS}. Requires GNUTLS (the program
@samp{gnutls-cli}).
@item
-@dfn{ssl:} Connect through SSL. Requires OpenSSL (the program
+@dfn{ssl:} Connect through @acronym{SSL}. Requires OpenSSL (the program
@samp{openssl}) or SSLeay (@samp{s_client}).
@item
-@dfn{shell:} Use a shell command to start @sc{imap} connection.
+@dfn{shell:} Use a shell command to start @acronym{IMAP} connection.
@item
@dfn{network:} Plain, TCP/IP network connection.
@end itemize
1.5.x and 1.6.x) you need to frob @code{imap-process-connection-type}
to make @code{imap.el} use a pty instead of a pipe when communicating
with @samp{imtest}. You will then suffer from a line length
-restrictions on @sc{imap} commands, which might make Gnus seem to hang
+restrictions on @acronym{IMAP} commands, which might make Gnus seem to hang
indefinitely if you have many articles in a mailbox. The variable
@code{imap-kerberos4-program} contain parameters to pass to the imtest
program.
-For TLS connection, the @code{gnutls-cli} program from GNUTLS is
+For @acronym{TLS} connection, the @code{gnutls-cli} program from GNUTLS is
needed. It is available from
@uref{http://www.gnu.org/software/gnutls/}.
@vindex imap-gssapi-program
This parameter specifies a list of command lines that invoke a GSSAPI
-authenticated IMAP stream in a subshell. They are tried sequentially
-until a connection is made, or the list has been exhausted. By
-default, @samp{gsasl} from GNU SASL, available from
+authenticated @acronym{IMAP} stream in a subshell. They are tried
+sequentially until a connection is made, or the list has been
+exhausted. By default, @samp{gsasl} from GNU SASL, available from
@uref{http://www.gnu.org/software/gsasl/}, and the @samp{imtest}
program from Cyrus IMAPD (see @code{imap-kerberos4-program}), are
tried.
@vindex imap-ssl-program
-For SSL connections, the OpenSSL program is available from
-@uref{http://www.openssl.org/}. OpenSSL was formerly known as SSLeay,
-and nnimap support it too - although the most recent versions of
+For @acronym{SSL} connections, the OpenSSL program is available from
+@uref{http://www.openssl.org/}. OpenSSL was formerly known as SSLeay,
+and nnimap support it too---although the most recent versions of
SSLeay, 0.9.x, are known to have serious bugs making it
-useless. Earlier versions, especially 0.8.x, of SSLeay are known to
-work. The variable @code{imap-ssl-program} contain parameters to pass
+useless. Earlier versions, especially 0.8.x, of SSLeay are known to
+work. The variable @code{imap-ssl-program} contain parameters to pass
to OpenSSL/SSLeay.
@vindex imap-shell-program
@vindex imap-shell-host
-For @sc{imap} connections using the @code{shell} stream, the variable
+For @acronym{IMAP} connections using the @code{shell} stream, the variable
@code{imap-shell-program} specify what program to call.
@item nnimap-authenticator
@itemize @bullet
@item
-@dfn{gssapi:} GSSAPI (usually kerberos 5) authentication. Requires
+@dfn{gssapi:} GSSAPI (usually kerberos 5) authentication. Requires
external program @code{gsasl} or @code{imtest}.
@item
-@dfn{kerberos4:} Kerberos 4 authentication. Requires external program
+@dfn{kerberos4:} Kerberos 4 authentication. Requires external program
@code{imtest}.
@item
-@dfn{digest-md5:} Encrypted username/password via DIGEST-MD5. Requires
+@dfn{digest-md5:} Encrypted username/password via DIGEST-MD5. Requires
external library @code{digest-md5.el}.
@item
@dfn{cram-md5:} Encrypted username/password via CRAM-MD5.
@item
@dfn{login:} Plain-text username/password via LOGIN.
@item
-@dfn{anonymous:} Login as `anonymous', supplying your email address as password.
+@dfn{anonymous:} Login as ``anonymous'', supplying your email address as password.
@end itemize
@item nnimap-expunge-on-close
-@cindex Expunging
+@cindex expunging
@vindex nnimap-expunge-on-close
-Unlike Parmenides the @sc{imap} designers has decided that things that
-doesn't exist actually does exist. More specifically, @sc{imap} has
+Unlike Parmenides the @acronym{IMAP} designers have decided things that
+don't exist actually do exist. More specifically, @acronym{IMAP} has
this concept of marking articles @code{Deleted} which doesn't actually
delete them, and this (marking them @code{Deleted}, that is) is what
-nnimap does when you delete a article in Gnus (with @kbd{B DEL} or
+nnimap does when you delete an article in Gnus (with @kbd{B DEL} or
similar).
Since the articles aren't really removed when we mark them with the
closing a mailbox.
@item never
Never actually delete articles. Currently there is no way of showing
-the articles marked for deletion in nnimap, but other @sc{imap} clients
+the articles marked for deletion in nnimap, but other @acronym{IMAP} clients
may allow you to do this. If you ever want to run the EXPUNGE command
manually, @xref{Expunging mailboxes}.
@item ask
@item nnimap-importantize-dormant
@vindex nnimap-importantize-dormant
-If non-nil (the default), marks dormant articles as ticked (as well),
-for other @sc{imap} clients. Within Gnus, dormant articles will
+If non-@code{nil} (the default), marks dormant articles as ticked (as
+well), for other @acronym{IMAP} clients. Within Gnus, dormant articles will
naturally still (only) be marked as dormant. This is to make dormant
-articles stand out, just like ticked articles, in other @sc{imap}
-clients. (In other words, Gnus has two ``Tick'' marks and @sc{imap}
+articles stand out, just like ticked articles, in other @acronym{IMAP}
+clients. (In other words, Gnus has two ``Tick'' marks and @acronym{IMAP}
has only one.)
Probably the only reason for frobing this would be if you're trying
-enable per-user persistant dormant flags, using something like:
+enable per-user persistent dormant flags, using something like:
@lisp
(setcdr (assq 'dormant nnimap-mark-to-flag-alist)
as ticked for other users.
@item nnimap-expunge-search-string
-@cindex Expunging
+@cindex expunging
@vindex nnimap-expunge-search-string
-This variable contain the @sc{imap} search command sent to server when
+This variable contain the @acronym{IMAP} search command sent to server when
searching for articles eligible for expiring. The default is
@code{"UID %s NOT SINCE %s"}, where the first @code{%s} is replaced by
UID set and the second @code{%s} is replaced by a date.
Probably the only useful value to change this to is
@code{"UID %s NOT SENTSINCE %s"}, which makes nnimap use the Date: in
-messages instead of the internal article date. See section 6.4.4 of
+messages instead of the internal article date. See section 6.4.4 of
RFC 2060 for more information on valid strings.
@item nnimap-authinfo-file
variable @code{nntp-authinfo-file} for exact syntax; also see
@ref{NNTP}.
+@item nnimap-need-unselect-to-notice-new-mail
+@vindex nnimap-need-unselect-to-notice-new-mail
+
+Unselect mailboxes before looking for new mail in them. Some servers
+seem to need this under some circumstances; it was reported that
+Courier 1.7.1 did.
+
@end table
@menu
* Expiring in IMAP:: Expiring mail with nnimap.
* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
* Expunging mailboxes:: Equivalent of a ``compress mailbox'' button.
-* A note on namespaces:: How to (not) use IMAP namespace in Gnus.
+* A note on namespaces:: How to (not) use @acronym{IMAP} namespace in Gnus.
+* Debugging IMAP:: What to do when things don't work.
@end menu
@subsection Splitting in IMAP
@cindex splitting imap mail
-Splitting is something Gnus users has loved and used for years, and now
+Splitting is something Gnus users have loved and used for years, and now
the rest of the world is catching up. Yeah, dream on, not many
-@sc{imap} server has server side splitting and those that have splitting
-seem to use some non-standard protocol. This means that @sc{imap}
-support for Gnus has to do it's own splitting.
+@acronym{IMAP} servers have server side splitting and those that have
+splitting seem to use some non-standard protocol. This means that
+@acronym{IMAP} support for Gnus has to do its own splitting.
And it does.
+(Incidentally, people seem to have been dreaming on, and Sieve has
+gaining a market share and is supported by several IMAP servers.
+Fortunately, Gnus support it too, @xref{Sieve Commands}.)
+
Here are the variables of interest:
@table @code
@cindex crosspost
@vindex nnimap-split-crosspost
-If non-nil, do crossposting if several split methods match the mail. If
-nil, the first match in @code{nnimap-split-rule} found will be used.
+If non-@code{nil}, do crossposting if several split methods match the
+mail. If @code{nil}, the first match in @code{nnimap-split-rule}
+found will be used.
Nnmail equivalent: @code{nnmail-crosspost}.
@cindex inbox
@vindex nnimap-split-inbox
-A string or a list of strings that gives the name(s) of @sc{imap}
-mailboxes to split from. Defaults to nil, which means that splitting is
-disabled!
+A string or a list of strings that gives the name(s) of @acronym{IMAP}
+mailboxes to split from. Defaults to @code{nil}, which means that
+splitting is disabled!
@lisp
(setq nnimap-split-inbox
No nnmail equivalent.
@item nnimap-split-rule
-@cindex Splitting, rules
+@cindex splitting, rules
@vindex nnimap-split-rule
New mail found in @code{nnimap-split-inbox} will be split according to
this variable.
This variable contains a list of lists, where the first element in the
-sublist gives the name of the @sc{imap} mailbox to move articles
+sublist gives the name of the @acronym{IMAP} mailbox to move articles
matching the regexp in the second element in the sublist. Got that?
Neither did I, we need examples.
INBOX.nnimap, all articles containing MAKE MONEY in the Subject: line
into INBOX.junk and everything else in INBOX.private.
-The first string may contain `\\1' forms, like the ones used by
+The first string may contain @samp{\\1} forms, like the ones used by
replace-match to insert sub-expressions from the matched text. For
instance:
The second element can also be a function. In that case, it will be
called with the first element of the rule as the argument, in a buffer
-containing the headers of the article. It should return a non-nil value
-if it thinks that the mail belongs in that group.
+containing the headers of the article. It should return a
+non-@code{nil} value if it thinks that the mail belongs in that group.
Nnmail users might recollect that the last regexp had to be empty to
match all articles (like in the example above). This is not required in
@lisp
(setq nnimap-split-rule
- '(("my1server" (".*" (("ding" "ding@@gnus.org")
- ("junk" "From:.*Simon")))
+ '(("my1server" (".*" (("ding" "ding@@gnus.org")
+ ("junk" "From:.*Simon"))))
("my2server" ("INBOX" nnimap-split-fancy))
- ("my[34]server" (".*" (("private" "To:.*Simon")
- ("junk" my-junk-func)))))
+ ("my[34]server" (".*" (("private" "To:.*Simon")
+ ("junk" my-junk-func))))))
@end lisp
The virtual server name is in fact a regexp, so that the same rules
Mail matching this predicate in @code{nnimap-split-inbox} will be
split, it is a string and the default is @samp{UNSEEN UNDELETED}.
-This might be useful if you use another @sc{imap} client to read mail in
+This might be useful if you use another @acronym{IMAP} client to read mail in
your inbox but would like Gnus to split all articles in the inbox
-regardless of readedness. Then you might change this to
+regardless of readedness. Then you might change this to
@samp{UNDELETED}.
@item nnimap-split-fancy
It's possible to set @code{nnimap-split-rule} to
@code{nnmail-split-fancy} if you want to use fancy
-splitting. @xref{Fancy Mail Splitting}.
+splitting. @xref{Fancy Mail Splitting}.
However, to be able to have different fancy split rules for nnmail and
nnimap back ends you can set @code{nnimap-split-rule} to
@findex nnimap-split-download-body
@vindex nnimap-split-download-body
-Set to non-nil to download entire articles during splitting. This is
-generally not required, and will slow things down considerably. You
-may need it if you want to use an advanced splitting function that
-analyses the body to split the article.
+Set to non-@code{nil} to download entire articles during splitting.
+This is generally not required, and will slow things down
+considerably. You may need it if you want to use an advanced
+splitting function that analyses the body to split the article.
@end table
Even though @code{nnimap} is not a proper @code{nnmail} derived back
end, it supports most features in regular expiring (@pxref{Expiring
-Mail}). Unlike splitting in IMAP (@pxref{Splitting in IMAP}) it do
-not clone the @code{nnmail} variables (i.e., creating
+Mail}). Unlike splitting in @acronym{IMAP} (@pxref{Splitting in
+IMAP}) it does not clone the @code{nnmail} variables (i.e., creating
@var{nnimap-expiry-wait}) but reuse the @code{nnmail} variables. What
follows below are the variables used by the @code{nnimap} expiry
process.
-A note on how the expire mark is stored on the @sc{imap} server is
+A note on how the expire mark is stored on the @acronym{IMAP} server is
appropriate here as well. The expire mark is translated into a
@code{imap} client specific mark, @code{gnus-expire}, and stored on the
message. This means that likely only Gnus will understand and treat
This variable is supported, and internally implemented by calling the
@code{nnmail} functions that handle this. It contains an optimization
-that if the destination is a IMAP group on the same server, the
+that if the destination is a @acronym{IMAP} group on the same server, the
article is copied instead of appended (that is, uploaded again).
@end table
@subsection Editing IMAP ACLs
@cindex editing imap acls
@cindex Access Control Lists
-@cindex Editing @sc{imap} ACLs
-@kindex G l
+@cindex Editing @acronym{IMAP} ACLs
+@kindex G l (Group)
@findex gnus-group-nnimap-edit-acl
-ACL stands for Access Control List. ACLs are used in @sc{imap} for
+ACL stands for Access Control List. ACLs are used in @acronym{IMAP} for
limiting (or enabling) other users access to your mail boxes. Not all
-@sc{imap} servers support this, this function will give an error if it
+@acronym{IMAP} servers support this, this function will give an error if it
doesn't.
-To edit a ACL for a mailbox, type @kbd{G l}
-(@code{gnus-group-edit-nnimap-acl}) and you'll be presented with a ACL
+To edit an ACL for a mailbox, type @kbd{G l}
+(@code{gnus-group-edit-nnimap-acl}) and you'll be presented with an ACL
editing window with detailed instructions.
Some possible uses:
@item
At least with the Cyrus server, you are required to give the user
``anyone'' posting ("p") capabilities to have ``plussing'' work (that is,
-mail sent to user+mailbox@@domain ending up in the @sc{imap} mailbox
+mail sent to user+mailbox@@domain ending up in the @acronym{IMAP} mailbox
INBOX.mailbox).
@end itemize
@subsection Expunging mailboxes
@cindex expunging
-@cindex Expunge
-@cindex Manual expunging
-@kindex G x
+@cindex expunge
+@cindex manual expunging
+@kindex G x (Group)
@findex gnus-group-nnimap-expunge
If you're using the @code{never} setting of @code{nnimap-expunge-on-close},
@cindex IMAP namespace
@cindex namespaces
-The IMAP protocol has a concept called namespaces, described by the
-following text in the RFC:
+The @acronym{IMAP} protocol has a concept called namespaces, described
+by the following text in the RFC:
-@example
+@display
5.1.2. Mailbox Namespace Naming Convention
By convention, the first hierarchical element of any mailbox name
comp.mail.misc newsgroup would have an mailbox name of
"#news.comp.mail.misc", and the name "comp.mail.misc" could refer
to a different object (e.g. a user's private mailbox).
-@end example
+@end display
+
+While there is nothing in this text that warrants concern for the
+@acronym{IMAP} implementation in Gnus, some servers use namespace
+prefixes in a way that does not work with how Gnus uses mailbox names.
+
+Specifically, University of Washington's @acronym{IMAP} server uses
+mailbox names like @code{#driver.mbx/read-mail} which are valid only
+in the @sc{create} and @sc{append} commands. After the mailbox is
+created (or a messages is appended to a mailbox), it must be accessed
+without the namespace prefix, i.e. @code{read-mail}. Since Gnus do
+not make it possible for the user to guarantee that user entered
+mailbox names will only be used with the CREATE and APPEND commands,
+you should simply not use the namespace prefixed mailbox names in
+Gnus.
+
+See the UoW IMAPD documentation for the @code{#driver.*/} prefix
+for more information on how to use the prefixes. They are a power
+tool and should be used only if you are sure what the effects are.
-While there is nothing in this text that warrants concern for the IMAP
-implementation in Gnus, some servers use namespace prefixes in a way
-that does not work with how Gnus uses mailbox names.
+@node Debugging IMAP
+@subsection Debugging IMAP
+@cindex IMAP debugging
+@cindex protocol dump (IMAP)
-Specifically, University of Washington's IMAP server uses mailbox
-names like @code{#driver.mbx/read-mail} which are valid only in the
-@sc{create} and @sc{append} commands. After the mailbox is created
-(or a messages is appended to a mailbox), it must be accessed without
-the namespace prefix, i.e. @code{read-mail}. Since Gnus do not make it
-possible for the user to guarantee that user entered mailbox names
-will only be used with the CREATE and APPEND commands, you should
-simply not use the namespace prefixed mailbox names in Gnus.
+@acronym{IMAP} is a complex protocol, more so than @acronym{NNTP} or
+@acronym{POP3}. Implementation bugs are not unlikely, and we do our
+best to fix them right away. If you encounter odd behaviour, chances
+are that either the server or Gnus is buggy.
-See the UoW @sc{imapd} documentation for the @code{#driver.*/} prefix
-for more information on how to use the prefixes. They are a power
-tool and should be used only if you are sure what the effects are.
+If you are familiar with network protocols in general, you will
+probably be able to extract some clues from the protocol dump of the
+exchanges between Gnus and the server. Even if you are not familiar
+with network protocols, when you include the protocol dump in
+@acronym{IMAP}-related bug reports you are helping us with data
+critical to solving the problem. Therefore, we strongly encourage you
+to include the protocol dump when reporting IMAP bugs in Gnus.
+
+
+@vindex imap-log
+Because the protocol dump, when enabled, generates lots of data, it is
+disabled by default. You can enable it by setting @code{imap-log} as
+follows:
+
+@lisp
+(setq imap-log t)
+@end lisp
+
+This instructs the @code{imap.el} package to log any exchanges with
+the server. The log is stored in the buffer @samp{*imap-log*}. Look
+for error messages, which sometimes are tagged with the keyword
+@code{BAD}---but when submitting a bug, make sure to include all the
+data.
@node Other Sources
@section Other Sources
@code{ange-ftp} or @code{efs} will actually allow you to read this
directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
-@code{nndir} will use @sc{nov} files if they are present.
+@code{nndir} will use @acronym{NOV} files if they are present.
@code{nndir} is a ``read-only'' back end---you can't delete or expire
articles with this method. You can use @code{nnmh} or @code{nnml} for
as a newsgroup. Several files types are supported:
@table @code
-@cindex babyl
-@cindex rmail mbox
+@cindex Babyl
+@cindex Rmail mbox
@item babyl
-The babyl (rmail) mail box.
+The Babyl (Rmail) mail box.
@cindex mbox
@cindex Unix mbox
Netscape mail boxes.
@item mime-parts
-@sc{mime} multipart messages.
+@acronym{MIME} multipart messages.
@item standard-digest
The standard (RFC 1153) digest format.
@item mime-digest
-A @sc{mime} digest of messages.
+A @acronym{MIME} digest of messages.
@item lanl-gov-announce
Announcement messages from LANL Gov Announce.
@code{nndoc-add-type} function. It takes two parameters---the first
is the definition itself and the second (optional) parameter says
where in the document type definition alist to put this definition.
-The alist is traversed sequentially, and @code{nndoc-TYPE-type-p} is
-called for a given type @code{TYPE}. So @code{nndoc-mmdf-type-p} is
-called to see whether a document is of @code{mmdf} type, and so on.
-These type predicates should return @code{nil} if the document is not
-of the correct type; @code{t} if it is of the correct type; and a
-number if the document might be of the correct type. A high number
-means high probability; a low number means low probability with
-@samp{0} being the lowest valid number.
+The alist is traversed sequentially, and
+@code{nndoc-@var{type}-type-p} is called for a given type @var{type}.
+So @code{nndoc-mmdf-type-p} is called to see whether a document is of
+@code{mmdf} type, and so on. These type predicates should return
+@code{nil} if the document is not of the correct type; @code{t} if it
+is of the correct type; and a number if the document might be of the
+correct type. A high number means high probability; a low number
+means low probability with @samp{0} being the lowest valid number.
@node SOUP
@item nngateway-mail2news-header-transformation
Creates a @code{To} header that looks like
@code{nngateway-address}.
+@end table
+
+@end table
Here's an example:
nngateway-mail2news-header-transformation)))
@end lisp
-@end table
-
-
-@end table
-
So, to use this, simply say something like:
@lisp
component groups. So if you tick an article in a virtual group, the
article will also be ticked in the component group from whence it
came. (And vice versa---marks from the component groups will also be
-shown in the virtual group.). To create an empty virtual group, run
+shown in the virtual group.). To create an empty virtual group, run
@kbd{G V} (@code{gnus-group-make-empty-virtual}) in the group buffer
and edit the method regexp with @kbd{M-e}
(@code{gnus-group-edit-group-method})
@cindex nnkiboze
@cindex kibozing
-@dfn{Kibozing} is defined by @sc{oed} as ``grepping through (parts of)
-the news feed''. @code{nnkiboze} is a back end that will do this for
-you. Oh joy! Now you can grind any @sc{nntp} server down to a halt
-with useless requests! Oh happiness!
+@dfn{Kibozing} is defined by the @acronym{OED} as ``grepping through
+(parts of) the news feed''. @code{nnkiboze} is a back end that will
+do this for you. Oh joy! Now you can grind any @acronym{NNTP} server
+down to a halt with useless requests! Oh happiness!
@kindex G k (Group)
To create a kibozed group, use the @kbd{G k} command in the group
The address field of the @code{nnkiboze} method is, as with
@code{nnvirtual}, a regexp to match groups to be ``included'' in the
-@code{nnkiboze} group. That's where most similarities between @code{nnkiboze}
-and @code{nnvirtual} end.
+@code{nnkiboze} group. That's where most similarities between
+@code{nnkiboze} and @code{nnvirtual} end.
-In addition to this regexp detailing component groups, an @code{nnkiboze} group
-must have a score file to say what articles are to be included in
-the group (@pxref{Scoring}).
+In addition to this regexp detailing component groups, an
+@code{nnkiboze} group must have a score file to say what articles are
+to be included in the group (@pxref{Scoring}).
@kindex M-x nnkiboze-generate-groups
@findex nnkiboze-generate-groups
You must run @kbd{M-x nnkiboze-generate-groups} after creating the
-@code{nnkiboze} groups you want to have. This command will take time. Lots of
-time. Oodles and oodles of time. Gnus has to fetch the headers from
-all the articles in all the component groups and run them through the
-scoring process to determine if there are any articles in the groups
-that are to be part of the @code{nnkiboze} groups.
+@code{nnkiboze} groups you want to have. This command will take time.
+Lots of time. Oodles and oodles of time. Gnus has to fetch the
+headers from all the articles in all the component groups and run them
+through the scoring process to determine if there are any articles in
+the groups that are to be part of the @code{nnkiboze} groups.
Please limit the number of component groups by using restrictive
regexps. Otherwise your sysadmin may become annoyed with you, and the
-@sc{nntp} site may throw you off and never let you back in again.
+@acronym{NNTP} site may throw you off and never let you back in again.
Stranger things have happened.
@code{nnkiboze} component groups do not have to be alive---they can be dead,
@vindex nnkiboze-directory
The generation of an @code{nnkiboze} group means writing two files in
-@code{nnkiboze-directory}, which is @file{~/News/} by default. One
-contains the @sc{nov} header lines for all the articles in the group,
-and the other is an additional @file{.newsrc} file to store information
-on what groups have been searched through to find component articles.
+@code{nnkiboze-directory}, which is @file{~/News/kiboze/} by default.
+One contains the @acronym{NOV} header lines for all the articles in
+the group, and the other is an additional @file{.newsrc} file to store
+information on what groups have been searched through to find
+component articles.
Articles marked as read in the @code{nnkiboze} group will have
-their @sc{nov} lines removed from the @sc{nov} file.
+their @acronym{NOV} lines removed from the @acronym{NOV} file.
@node Gnus Unplugged
@section Gnus Unplugged
@cindex offline
@cindex unplugged
-@cindex Agent
-@cindex Gnus Agent
-@cindex Gnus Unplugged
+@cindex agent
+@cindex Gnus agent
+@cindex Gnus unplugged
In olden times (ca. February '88), people used to run their newsreaders
on big machines with permanent connections to the net. News transport
reading news on a machine.
Setting up Gnus as an ``offline'' newsreader is quite simple. In
-fact, you don't even have to configure anything.
+fact, you don't have to configure anything as the agent is now enabled
+by default (@pxref{Agent Variables, gnus-agent}).
Of course, to use it as such, you have to learn a few new commands.
* Agent Basics:: How it all is supposed to work.
* Agent Categories:: How to tell the Gnus Agent what to download.
* Agent Commands:: New commands for all the buffers.
+* Agent Visuals:: Ways that the agent may effect your summary buffer.
* Agent as Cache:: The Agent is a big cache too.
* Agent Expiry:: How to make old articles go away.
* Agent Regeneration:: How to recover from lost connections and other accidents.
-* Agent and IMAP:: How to use the Agent with IMAP.
+* Agent and IMAP:: How to use the Agent with @acronym{IMAP}.
* Outgoing Messages:: What happens when you post/mail something?
* Agent Variables:: Customizing is fun.
-* Example Setup:: An example @file{.gnus.el} file for offline people.
+* Example Setup:: An example @file{~/.gnus.el} file for offline people.
* Batching Agents:: How to fetch news from a @code{cron} job.
* Agent Caveats:: What you think it'll do and what it does.
@end menu
@dfn{Downloading} means fetching things from the net to your local
machine. @dfn{Uploading} is doing the opposite.
+You know that Gnus gives you all the opportunity you'd ever want for
+shooting yourself in the foot. Some people call it flexibility. Gnus
+is also customizable to a great extent, which means that the user has a
+say on how Gnus behaves. Other newsreaders might unconditionally shoot
+you in your foot, but with Gnus, you have a choice!
+
+Gnus is never really in plugged or unplugged state. Rather, it applies
+that state to each server individually. This means that some servers
+can be plugged while others can be unplugged. Additionally, some
+servers can be ignored by the Agent altogether (which means that
+they're kinda like plugged always).
+
+So when you unplug the Agent and then wonder why is Gnus opening a
+connection to the Net, the next step to do is to look whether all
+servers are agentized. If there is an unagentized server, you found
+the culprit.
+
+Another thing is the @dfn{offline} state. Sometimes, servers aren't
+reachable. When Gnus notices this, it asks you whether you want the
+server to be switched to offline state. If you say yes, then the
+server will behave somewhat as if it was unplugged, except that Gnus
+will ask you whether you want to switch it back online again.
+
Let's take a typical Gnus session using the Agent.
@itemize @bullet
You then decide to see whether any new news has arrived. You connect
your machine to the net (using PPP or whatever), and then hit @kbd{J j}
to make Gnus become @dfn{plugged} and use @kbd{g} to check for new mail
-as usual. To check for new mail in unplugged mode, see (@pxref{Mail
+as usual. To check for new mail in unplugged mode (@pxref{Mail
Source Specifiers}).
@item
-You can then read the new news immediately, or you can download the news
-onto your local machine. If you want to do the latter, you press @kbd{g}
-to check if there are any new news and then @kbd{J
-s} to fetch all the eligible articles in all the groups. (To let Gnus
-know which articles you want to download, @pxref{Agent Categories}.)
+You can then read the new news immediately, or you can download the
+news onto your local machine. If you want to do the latter, you press
+@kbd{g} to check if there are any new news and then @kbd{J s} to fetch
+all the eligible articles in all the groups. (To let Gnus know which
+articles you want to download, @pxref{Agent Categories}).
@item
After fetching the articles, you press @kbd{J j} to make Gnus become
@kbd{J a} on the server (or servers) that you wish to have covered by the
Agent (@pxref{Server Agent Commands}), or @kbd{J r} on automatically
added servers you do not wish to have covered by the Agent. By default,
-all @code{nntp} and @code{nnimap} groups in @code{gnus-select-method} and
+all @code{nntp} and @code{nnimap} servers in @code{gnus-select-method} and
@code{gnus-secondary-select-methods} are agentized.
@item
-
Decide on download policy. It's fairly simple once you decide whether
you are going to use agent categories, topic parameters, and/or group
parameters to implement your policy. If you're new to gnus, it
-is probably best to start with a category @xref{Agent Categories}.
+is probably best to start with a category, @xref{Agent Categories}.
Both topic parameters (@pxref{Topic Parameters}) and agent categories
(@pxref{Agent Categories}) provide for setting a policy that applies
to multiple groups. Which you use is entirely up to you. Topic
parameters do override categories so, if you mix the two, you'll have
to take that into account. If you have a few groups that deviate from
-your policy, you can use grou parameters (@pxref{Group Parameters}) to
+your policy, you can use group parameters (@pxref{Group Parameters}) to
configure them.
@item
a rule to decide which source to believe. This rule specifies that
the parameter sources are checked in the following order: group
parameters, topic parameters, agent category, and finally customizable
-variables. So you can mix all of these sources to produce a wide range
+variables. So you can mix all of these sources to produce a wide range
of behavior, just don't blame me if you don't remember where you put
your settings.
customizable variables. The complete list of agent parameters are
listed below.
+@cindex Agent Parameters
@table @code
-@item gnus-agent-cat-name
+@item agent-cat-name
The name of the category.
-@item gnus-agent-cat-groups
+@item agent-groups
The list of groups that are in this category.
-@item gnus-agent-cat-predicate
+@item agent-predicate
A predicate which (generally) gives a rough outline of which articles
are eligible for downloading; and
-@item gnus-agent-cat-score-file
+@item agent-score-file
a score rule which (generally) gives you a finer granularity when
deciding what articles to download. (Note that this @dfn{download
score} is not necessarily related to normal scores.)
-@item gnus-agent-cat-enable-expiration
+@item agent-enable-expiration
a boolean indicating whether the agent should expire old articles in
this group. Most groups should be expired to conserve disk space. In
fact, its probably safe to say that the gnus.* hierarchy contains the
only groups that should not be expired.
-@item gnus-agent-cat-days-until-old
+@item agent-days-until-old
an integer indicating the number of days that the agent should wait
before deciding that a read article is safe to expire.
-@item gnus-agent-cat-low-score
+@item agent-low-score
an integer that overrides the value of @code{gnus-agent-low-score}.
-@item gnus-agent-cat-high-score
+@item agent-high-score
an integer that overrides the value of @code{gnus-agent-high-score}.
-@item gnus-agent-cat-length-when-short
+@item agent-length-when-short
an integer that overrides the value of
@code{gnus-agent-short-article}.
-@item gnus-agent-cat-length-when-long
+@item agent-length-when-long
an integer that overrides the value of @code{gnus-agent-long-article}.
+
+@item agent-enable-undownloaded-faces
+a symbol indicating whether the summary buffer should display
+undownloaded articles using the @code{gnus-summary-*-undownloaded-face}
+faces. Any symbol other than @code{nil} will enable the use of
+undownloaded faces.
@end table
The name of a category can not be changed once the category has been
The above predicates apply to @emph{all} the groups which belong to the
category. However, if you wish to have a specific predicate for an
individual group within a category, or you're just too lazy to set up a
-new category, you can enter a group's individual predicate in it's group
+new category, you can enter a group's individual predicate in its group
parameters like so:
@lisp
@item
Score rule
-This has the same syntax as a normal gnus score file except only a
+This has the same syntax as a normal Gnus score file except only a
subset of scoring keywords are available as mentioned above.
example:
@kindex @@ (Agent Summary)
@findex gnus-agent-toggle-mark
Toggle whether to download the article
-(@code{gnus-agent-toggle-mark}). The dowload mark is @samp{%} by
-default.
+(@code{gnus-agent-toggle-mark}). The download mark is @samp{%} by
+default.
@item J c
@kindex J c (Agent Summary)
@item J S
@kindex J S (Agent Summary)
@findex gnus-agent-fetch-group
-Download all eligible (See @pxref{Agent Categories}) articles in this group.
+Download all eligible (@pxref{Agent Categories}) articles in this group.
(@code{gnus-agent-fetch-group}).
@item J s
@end table
+@node Agent Visuals
+@subsection Agent Visuals
+
+If you open a summary while unplugged and, Gnus knows from the group's
+active range that there are more articles than the headers currently
+stored in the Agent, you may see some articles whose subject looks
+something like @samp{[Undownloaded article #####]}. These are
+placeholders for the missing headers. Aside from setting a mark,
+there is not much that can be done with one of these placeholders.
+When Gnus finally gets a chance to fetch the group's headers, the
+placeholders will automatically be replaced by the actual headers.
+You can configure the summary buffer's maneuvering to skip over the
+placeholders if you care (See @code{gnus-auto-goto-ignores}).
+
+While it may be obvious to all, the only headers and articles
+available while unplugged are those headers and articles that were
+fetched into the Agent while previously plugged. To put it another
+way, "If you forget to fetch something while plugged, you might have a
+less than satisfying unplugged session". For this reason, the Agent
+adds two visual effects to your summary buffer. These effects display
+the download status of each article so that you always know which
+articles will be available when unplugged.
+
+The first visual effect is the @samp{%O} spec. If you customize
+@code{gnus-summary-line-format} to include this specifier, you will add
+a single character field that indicates an article's download status.
+Articles that have been fetched into either the Agent or the Cache,
+will display @code{gnus-downloaded-mark} (defaults to @samp{+}). All
+other articles will display @code{gnus-undownloaded-mark} (defaults to
+@samp{-}). If you open a group that has not been agentized, a space
+(@samp{ }) will be displayed.
+
+The second visual effect are the undownloaded faces. The faces, there
+are three indicating the article's score (low, normal, high), seem to
+result in a love/hate response from many Gnus users. The problem is
+that the face selection is controlled by a list of condition tests and
+face names (See @code{gnus-summary-highlight}). Each condition is
+tested in the order in which it appears in the list so early
+conditions have precedence over later conditions. All of this means
+that, if you tick an undownloaded article, the article will continue
+to be displayed in the undownloaded face rather than the ticked face.
+
+If you use the Agent as a cache (to avoid downloading the same article
+each time you visit it or to minimize your connection time), the
+undownloaded face will probably seem like a good idea. The reason
+being that you do all of our work (marking, reading, deleting) with
+downloaded articles so the normal faces always appear. For those
+users using the agent to improve online performance by caching the NOV
+database (most users since 5.10.2), the undownloaded faces may appear
+to be an absolutely horrible idea. The issue being that, since none
+of their articles have been fetched into the Agent, all of the
+normal faces will be obscured by the undownloaded faces.
+
+If you would like to use the undownloaded faces, you must enable the
+undownloaded faces by setting the @code{agent-enable-undownloaded-faces}
+group parameter to t. This parameter, like all other agent
+parameters, may be set on an Agent Category (@pxref{Agent
+Categories}), a Group Topic (@pxref{Topic Parameters}), or an
+individual group (@pxref{Group Parameters}).
+
@node Agent as Cache
@subsection Agent as Cache
@pxref{Agent Variables}) to always download headers and articles while
plugged. Gnus will almost certainly be slower, but it will be kept
synchronized with the server. That last point probably won't make any
-sense if you are using a nntp or nnimap backend.
+sense if you are using a nntp or nnimap back end.
@node Agent Expiry
@subsection Agent Expiry
@kindex M-x gnus-agent-expire
@kindex M-x gnus-agent-expire-group
@findex gnus-agent-expire-group
-@cindex Agent expiry
-@cindex Gnus Agent expiry
+@cindex agent expiry
+@cindex Gnus agent expiry
@cindex expiry
-The Agent backend, @code{nnagent}, doesn't handle expiry. Well, at
-least it doesn't handle it like other backends. Instead, there are
+The Agent back end, @code{nnagent}, doesn't handle expiry. Well, at
+least it doesn't handle it like other back ends. Instead, there are
special @code{gnus-agent-expire} and @code{gnus-agent-expire-group}
commands that will expire all read articles that are older than
@code{gnus-agent-expire-days} days. They can be run whenever you feel
@kbd{C-g} or anything else) once you've started one of them.
Note that other functions, e.g. @code{gnus-request-expire-articles},
-might run @code{gnus-agent-expire} for you to keep the agent
+might run @code{gnus-agent-expire} for you to keep the agent
synchronized with the group.
The agent parameter @code{agent-enable-expiration} may be used to
@node Agent Regeneration
@subsection Agent Regeneration
-@cindex Agent Regeneration
-@cindex Gnus Agent Regeneration
+@cindex agent regeneration
+@cindex Gnus agent regeneration
@cindex regeneration
The local data structures used by @code{nnagent} may become corrupted
@findex gnus-agent-regenerate-group
@kindex M-x gnus-agent-regenerate-group
The command @code{gnus-agent-regenerate-group} uses the local copies
-of individual articles to repair the local NOV(header) database. It
+of individual articles to repair the local @acronym{NOV}(header) database. It
then updates the internal data structures that document which articles
are stored locally. An optional argument will mark articles in the
agent as unread.
@subsection Agent and IMAP
The Agent works with any Gnus back end, including nnimap. However,
-since there are some conceptual differences between @sc{nntp} and
-@sc{imap}, this section (should) provide you with some information to
-make Gnus Agent work smoother as a @sc{imap} Disconnected Mode client.
+since there are some conceptual differences between @acronym{NNTP} and
+@acronym{IMAP}, this section (should) provide you with some information to
+make Gnus Agent work smoother as a @acronym{IMAP} Disconnected Mode client.
The first thing to keep in mind is that all flags (read, ticked, etc)
-are kept on the @sc{imap} server, rather than in @file{.newsrc} as is the
+are kept on the @acronym{IMAP} server, rather than in @file{.newsrc} as is the
case for nntp. Thus Gnus need to remember flag changes when
disconnected, and synchronize these flags when you plug back in.
in the group buffer.
Some things are currently not implemented in the Agent that you'd might
-expect from a disconnected @sc{imap} client, including:
+expect from a disconnected @acronym{IMAP} client, including:
@itemize @bullet
Technical note: the synchronization algorithm does not work by ``pushing''
all local flags to the server, but rather incrementally update the
server view of flags by changing only those flags that were changed by
-the user. Thus, if you set one flag on a article, quit the group and
+the user. Thus, if you set one flag on an article, quit the group and
re-select the group and remove the flag; the flag will be set and
removed from the server when you ``synchronize''. The queued flag
operations can be found in the per-server @code{flags} file in the Agent
@node Outgoing Messages
@subsection Outgoing Messages
-When Gnus is unplugged, all outgoing messages (both mail and news) are
-stored in the draft group ``queue'' (@pxref{Drafts}). You can view
-them there after posting, and edit them at will.
+By default, when Gnus is unplugged, all outgoing messages (both mail
+and news) are stored in the draft group ``queue'' (@pxref{Drafts}).
+You can view them there after posting, and edit them at will.
-When Gnus is plugged again, you can send the messages either from the
-draft group with the special commands available there, or you can use
-the @kbd{J S} command in the group buffer to send all the sendable
-messages in the draft group.
+You can control the circumstances under which outgoing mail is queued
+(see @code{gnus-agent-queue-mail}, @pxref{Agent Variables}). Outgoing
+news is always queued when Gnus is unplugged, and never otherwise.
+You can send the messages either from the draft group with the special
+commands available there, or you can use the @kbd{J S} command in the
+group buffer to send all the sendable messages in the draft group.
+Posting news will only work when Gnus is plugged, but you can send
+mail at any time.
+If sending mail while unplugged does not work for you and you worry
+about hitting @kbd{J S} by accident when unplugged, you can have Gnus
+ask you to confirm your action (see
+@code{gnus-agent-prompt-send-queue}, @pxref{Agent Variables}).
@node Agent Variables
@subsection Agent Variables
@table @code
+@item gnus-agent
+@vindex gnus-agent
+Is the agent enabled? The default is @code{t}. When first enabled,
+the agent will use @code{gnus-agent-auto-agentize-methods} to
+automatically mark some backends as agentized. You may change which
+backends are agentized using the agent commands in the server buffer.
+
+To enter the server buffer, use the @kbd{^}
+(@code{gnus-group-enter-server-mode}) command in the group buffer.
+
+
@item gnus-agent-directory
@vindex gnus-agent-directory
Where the Gnus Agent will store its files. The default is
@item gnus-agent-cache
@vindex gnus-agent-cache
-Variable to control whether use the locally stored @sc{nov} and
+Variable to control whether use the locally stored @acronym{NOV} and
articles when plugged, e.g. essentially using the Agent as a cache.
-The default is non-nil, which means to use the Agent as a cache.
+The default is non-@code{nil}, which means to use the Agent as a cache.
@item gnus-agent-go-online
@vindex gnus-agent-go-online
@item gnus-agent-consider-all-articles
@vindex gnus-agent-consider-all-articles
If @code{gnus-agent-consider-all-articles} is non-@code{nil}, the
-agent will fetch all missing headers. When @code{nil}, the agent will
-fetch only new headers. The default is @code{nil}.
+agent will let the agent predicate decide whether articles need to be
+downloaded or not, for all articles. When @code{nil}, the default,
+the agent will only let the predicate decide whether unread articles
+are downloaded or not. If you enable this, you may also want to look
+into the agent expiry settings (@pxref{Category Variables}), so that
+the agent doesn't download articles which the agent will later expire,
+over and over again.
@item gnus-agent-max-fetch-size
@vindex gnus-agent-max-fetch-size
@item gnus-server-unopen-status
@vindex gnus-server-unopen-status
-Perhaps not a Agent variable, but closely related to the Agent, this
+Perhaps not an Agent variable, but closely related to the Agent, this
variable says what will happen if Gnus cannot open a server. If the
Agent is enabled, the default, @code{nil}, makes Gnus ask the user
whether to deny the server or whether to unplug the agent. If the
@item gnus-auto-goto-ignores
@vindex gnus-auto-goto-ignores
-Another variable that isn't a Agent variable, yet so closely related
+Another variable that isn't an Agent variable, yet so closely related
that most will look for it here, this variable tells the summary
buffer how to maneuver around undownloaded (only headers stored in the
agent) and unfetched (neither article nor headers stored) articles.
ignores articles that have not been fetched), @code{unfetched}
(maneuvering ignores articles whose headers have not been fetched).
+@item gnus-agent-queue-mail
+@vindex gnus-agent-queue-mail
+When @code{gnus-agent-queue-mail} is @code{always}, Gnus will always
+queue mail rather than sending it straight away. When @code{t}, Gnus
+will queue mail when unplugged only. When @code{nil}, never queue
+mail. The default is @code{t}.
+
+@item gnus-agent-prompt-send-queue
+@vindex gnus-agent-prompt-send-queue
+When @code{gnus-agent-prompt-send-queue} is non-@code{nil} Gnus will
+prompt you to confirm that you really wish to proceed if you hit
+@kbd{J S} while unplugged. The default is @code{nil}.
+
+@item gnus-agent-auto-agentize-methods
+@vindex gnus-agent-auto-agentize-methods
+If you have never used the Agent before (or more technically, if
+@file{~/News/agent/lib/servers} does not exist), Gnus will
+automatically agentize a few servers for you. This variable control
+which backends should be auto-agentized. It is typically only useful
+to agentize remote backends. The auto-agentizing has the same effect
+as running @kbd{J a} on the servers (@pxref{Server Agent Commands}).
+If the file exist, you must manage the servers manually by adding or
+removing them, this variable is only applicable the first time you
+start Gnus. The default is @samp{(nntp nnimap)}.
+
@end table
If you don't want to read this manual, and you have a fairly standard
setup, you may be able to use something like the following as your
-@file{.gnus.el} file to get started.
+@file{~/.gnus.el} file to get started.
@lisp
-;;; Define how Gnus is to fetch news. We do this over @sc{nntp}
-;;; from your ISP's server.
+;;; @r{Define how Gnus is to fetch news. We do this over @acronym{NNTP}}
+;;; @r{from your ISP's server.}
(setq gnus-select-method '(nntp "news.your-isp.com"))
-;;; Define how Gnus is to read your mail. We read mail from
-;;; your ISP's POP server.
+;;; @r{Define how Gnus is to read your mail. We read mail from}
+;;; @r{your ISP's @acronym{POP} server.}
(setq mail-sources '((pop :server "pop.your-isp.com")))
-;;; Say how Gnus is to store the mail. We use nnml groups.
+;;; @r{Say how Gnus is to store the mail. We use nnml groups.}
(setq gnus-secondary-select-methods '((nnml "")))
-;;; Make Gnus into an offline newsreader.
-;;; (gnus-agentize) ; The obsolete setting.
-;;; (setq gnus-agent t) ; Now the default.
+;;; @r{Make Gnus into an offline newsreader.}
+;;; (gnus-agentize) ; @r{The obsolete setting.}
+;;; (setq gnus-agent t) ; @r{Now the default.}
@end lisp
That should be it, basically. Put that in your @file{~/.gnus.el} file,
If this is the first time you've run Gnus, you will be subscribed
automatically to a few default newsgroups. You'll probably want to
subscribe to more groups, and to do that, you have to query the
-@sc{nntp} server for a complete list of groups with the @kbd{A A}
+@acronym{NNTP} server for a complete list of groups with the @kbd{A A}
command. This usually takes quite a while, but you only have to do it
once.
@example
#!/bin/sh
-emacs -batch -l ~/.emacs -f -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
+emacs -batch -l ~/.emacs -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
@end example
@code{gnus-agent-fetch-selected-article} to
@code{gnus-select-article-hook}.
-@item If I read an article while plugged, and the article already exists in
+@item If I read an article while plugged, and the article already exists in
the Agent, will it get downloaded once more?
@strong{No}, unless @code{gnus-agent-cache} is @code{nil}.
* Global Score Files:: Earth-spanning, ear-splitting score files.
* Kill Files:: They are still here, but they can be ignored.
* Converting Kill Files:: Translating kill files to score files.
-* GroupLens:: Getting predictions on what you like to read.
* Advanced Scoring:: Using logical expressions to build score rules.
* Score Decays:: It can be useful to let scores wither away.
@end menu
@findex gnus-score-find-trace
Display all score rules that have been used on the current article
(@code{gnus-score-find-trace}). In the @code{*Score Trace*} buffer, you
-can use @kbd{q} to quit. @kbd{e} edits the corresponding score file.
-When point is on a string within the match element, @kbd{e} will try to
-bring you to this string in the score file.
+may type @kbd{e} to edit score file corresponding to the score rule on
+current line and @kbd{f} to format (@code{gnus-score-pretty-print}) the
+score file and edit it.
@item V w
@kindex V w (Summary)
@item e
Score on an ``extra'' header, that is, one of those in gnus-extra-headers,
-if your @sc{nntp} server tracks additional header data in overviews.
+if your @acronym{NNTP} server tracks additional header data in overviews.
@item f
Score on followups---this matches the author name, and adds scores to
@table @kbd
+@item W e
+@kindex W e (Group)
+@findex gnus-score-edit-all-score
+Edit the apply-to-all-groups all.SCORE file. You will be popped into
+a @code{gnus-score-mode} buffer (@pxref{Score File Editing}).
+
@item W f
@kindex W f (Group)
@findex gnus-score-flush-cache
@item gnus-kill-files-directory
@vindex gnus-kill-files-directory
All kill and score files will be stored in this directory, which is
-initialized from the @code{SAVEDIR} environment variable by default.
+initialized from the @env{SAVEDIR} environment variable by default.
This is @file{~/News/} by default.
@item gnus-score-file-suffix
@item gnus-score-thread-simplify
@vindex gnus-score-thread-simplify
-If this variable is non-@code{nil}, article subjects will be simplified
-for subject scoring purposes in the same manner as with
+If this variable is non-@code{nil}, article subjects will be
+simplified for subject scoring purposes in the same manner as with
threading---according to the current value of
-gnus-simplify-subject-functions. If the scoring entry uses
+@code{gnus-simplify-subject-functions}. If the scoring entry uses
@code{substring} or @code{exact} matching, the match will also be
simplified in this manner.
(eval (ding)))
@end lisp
-This example demonstrates most score file elements. For a different
-approach, see @pxref{Advanced Scoring}.
+This example demonstrates most score file elements. @xref{Advanced
+Scoring}, for a different approach.
-Even though this looks much like lisp code, nothing here is actually
-@code{eval}ed. The lisp reader is used to read this form, though, so it
+Even though this looks much like Lisp code, nothing here is actually
+@code{eval}ed. The Lisp reader is used to read this form, though, so it
has to be valid syntactically, if not semantically.
Six keys are supported by this alist:
entries will result in new score entries being added for all follow-ups
to articles that matches these score entries.
-Following this key is a arbitrary number of score entries, where each
+Following this key is an arbitrary number of score entries, where each
score entry has one to four elements.
@enumerate
gnus-extra-headers, you can score on these headers' values. In this
case, there is a 5th element in the score entry, being the name of the
header to be scored. The following entry is useful in your
-@file{all.SCORE} file in case of spam attacks from a single origin host,
-if your @sc{nntp} server tracks NNTP-Posting-Host in overviews:
+@file{all.SCORE} file in case of spam attacks from a single origin
+host, if your @acronym{NNTP} server tracks @samp{NNTP-Posting-Host} in
+overviews:
@lisp
-("111.222.333.444" -1000 nil s "NNTP-Posting-Host")
+("111.222.333.444" -1000 nil s
+ "NNTP-Posting-Host")
@end lisp
@item Lines, Chars
@end table
@end enumerate
-@cindex Score File Atoms
+@cindex score file atoms
@item mark
The value of this entry should be a number. Any articles with a score
lower than this number will be marked as read.
@vindex gnus-score-mode-hook
@code{gnus-score-menu-hook} is run in score mode buffers.
-In the summary buffer you can use commands like @kbd{V f} and @kbd{V
-e} to begin editing score files.
+In the summary buffer you can use commands like @kbd{V f}, @kbd{V e} and
+@kbd{V t} to begin editing score files.
@node Adaptive Scoring
group name, the @var{file-name} will be used as the home score file.
@item
-A function. If the function returns non-nil, the result will be used as
-the home score file.
+A function. If the function returns non-@code{nil}, the result will
+be used as the home score file.
@item
A string. Use the string as the home score file.
@lisp
(setq gnus-home-score-file
- ;; All groups that match the regexp "\\.emacs"
+ ;; @r{All groups that match the regexp @code{"\\.emacs"}}
'(("\\.emacs" "emacs.SCORE")
- ;; All the comp groups in one score file
+ ;; @r{All the comp groups in one score file}
("^comp" "comp.SCORE")))
@end lisp
matches. This takes a long time in big groups.
Now, there's not much you can do about this for news groups, but for
-mail groups, you have greater control. In the @pxref{To From
-Newsgroups} section of the manual, it's explained in greater detail what
-this mechanism does, but here's a cookbook example for @code{nnml} on
-how to allow scoring on the @samp{To} and @samp{Cc} headers.
+mail groups, you have greater control. In @ref{To From Newsgroups},
+it's explained in greater detail what this mechanism does, but here's
+a cookbook example for @code{nnml} on how to allow scoring on the
+@samp{To} and @samp{Cc} headers.
-Put the following in your @file{.gnus.el} file.
+Put the following in your @file{~/.gnus.el} file.
@lisp
(setq gnus-extra-headers '(To Cc Newsgroups Keywords)
encounters what looks like a @code{rn} kill file, it will take a stab at
interpreting it.
-Two summary functions for editing a GNUS kill file:
+Two summary functions for editing a @sc{gnus} kill file:
@table @kbd
before.
-@node GroupLens
-@section GroupLens
-@cindex GroupLens
-
-GroupLens (@uref{http://www.cs.umn.edu/Research/GroupLens/}) is a
-collaborative filtering system that helps you work together with other
-people to find the quality news articles out of the huge volume of
-news articles generated every day.
+@node Advanced Scoring
+@section Advanced Scoring
-To accomplish this the GroupLens system combines your opinions about
-articles you have already read with the opinions of others who have done
-likewise and gives you a personalized prediction for each unread news
-article. Think of GroupLens as a matchmaker. GroupLens watches how you
-rate articles, and finds other people that rate articles the same way.
-Once it has found some people you agree with it tells you, in the form
-of a prediction, what they thought of the article. You can use this
-prediction to help you decide whether or not you want to read the
-article.
+Scoring on Subjects and From headers is nice enough, but what if you're
+really interested in what a person has to say only when she's talking
+about a particular subject? Or what if you really don't want to
+read what person A has to say when she's following up to person B, but
+want to read what she says when she's following up to person C?
-@sc{Note:} Unfortunately the GroupLens system seems to have shut down,
-so this section is mostly of historical interest.
+By using advanced scoring rules you may create arbitrarily complex
+scoring patterns.
@menu
-* Using GroupLens:: How to make Gnus use GroupLens.
-* Rating Articles:: Letting GroupLens know how you rate articles.
-* Displaying Predictions:: Displaying predictions given by GroupLens.
-* GroupLens Variables:: Customizing GroupLens.
+* Advanced Scoring Syntax:: A definition.
+* Advanced Scoring Examples:: What they look like.
+* Advanced Scoring Tips:: Getting the most out of it.
@end menu
-@node Using GroupLens
-@subsection Using GroupLens
+@node Advanced Scoring Syntax
+@subsection Advanced Scoring Syntax
+
+Ordinary scoring rules have a string as the first element in the rule.
+Advanced scoring rules have a list as the first element. The second
+element is the score to be applied if the first element evaluated to a
+non-@code{nil} value.
-To use GroupLens you must register a pseudonym with your local Better
-Bit Bureau (BBB).
-@uref{http://www.cs.umn.edu/Research/GroupLens/bbb.html} is the only
-better bit in town at the moment.
+These lists may consist of three logical operators, one redirection
+operator, and various match operators.
-Once you have registered you'll need to set a couple of variables.
+Logical operators:
@table @code
+@item &
+@itemx and
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{false}, and then it'll stop. If all arguments
+evaluate to @code{true} values, then this operator will return
+@code{true}.
-@item gnus-use-grouplens
-@vindex gnus-use-grouplens
-Setting this variable to a non-@code{nil} value will make Gnus hook into
-all the relevant GroupLens functions.
-
-@item grouplens-pseudonym
-@vindex grouplens-pseudonym
-This variable should be set to the pseudonym you got when registering
-with the Better Bit Bureau.
+@item |
+@itemx or
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{true}. If no arguments are @code{true},
+then this operator will return @code{false}.
-@item grouplens-newsgroups
-@vindex grouplens-newsgroups
-A list of groups that you want to get GroupLens predictions for.
+@item !
+@itemx not
+@itemx ¬
+This logical operator only takes a single argument. It returns the
+logical negation of the value of its argument.
@end table
-That's the minimum of what you need to get up and running with GroupLens.
-Once you've registered, GroupLens will start giving you scores for
-articles based on the average of what other people think. But, to get
-the real benefit of GroupLens you need to start rating articles
-yourself. Then the scores GroupLens gives you will be personalized for
-you, based on how the people you usually agree with have already rated.
-
+There is an @dfn{indirection operator} that will make its arguments
+apply to the ancestors of the current article being scored. For
+instance, @code{1-} will make score rules apply to the parent of the
+current article. @code{2-} will make score rules apply to the
+grandparent of the current article. Alternatively, you can write
+@code{^^}, where the number of @code{^}s (carets) says how far back into
+the ancestry you want to go.
-@node Rating Articles
-@subsection Rating Articles
-
-In GroupLens, an article is rated on a scale from 1 to 5, inclusive.
-Where 1 means something like this article is a waste of bandwidth and 5
-means that the article was really good. The basic question to ask
-yourself is, ``on a scale from 1 to 5 would I like to see more articles
-like this one?''
-
-There are four ways to enter a rating for an article in GroupLens.
-
-@table @kbd
-
-@item r
-@kindex r (GroupLens)
-@findex bbb-summary-rate-article
-This function will prompt you for a rating on a scale of one to five.
-
-@item k
-@kindex k (GroupLens)
-@findex grouplens-score-thread
-This function will prompt you for a rating, and rate all the articles in
-the thread. This is really useful for some of those long running giant
-threads in rec.humor.
-
-@end table
-
-The next two commands, @kbd{n} and @kbd{,} take a numerical prefix to be
-the score of the article you're reading.
-
-@table @kbd
-
-@item 1-5 n
-@kindex n (GroupLens)
-@findex grouplens-next-unread-article
-Rate the article and go to the next unread article.
-
-@item 1-5 ,
-@kindex , (GroupLens)
-@findex grouplens-best-unread-article
-Rate the article and go to the next unread article with the highest score.
-
-@end table
-
-If you want to give the current article a score of 4 and then go to the
-next article, just type @kbd{4 n}.
-
-
-@node Displaying Predictions
-@subsection Displaying Predictions
-
-GroupLens makes a prediction for you about how much you will like a
-news article. The predictions from GroupLens are on a scale from 1 to
-5, where 1 is the worst and 5 is the best. You can use the predictions
-from GroupLens in one of three ways controlled by the variable
-@code{gnus-grouplens-override-scoring}.
-
-@vindex gnus-grouplens-override-scoring
-There are three ways to display predictions in grouplens. You may
-choose to have the GroupLens scores contribute to, or override the
-regular gnus scoring mechanism. override is the default; however, some
-people prefer to see the Gnus scores plus the grouplens scores. To get
-the separate scoring behavior you need to set
-@code{gnus-grouplens-override-scoring} to @code{'separate}. To have the
-GroupLens predictions combined with the grouplens scores set it to
-@code{'override} and to combine the scores set
-@code{gnus-grouplens-override-scoring} to @code{'combine}. When you use
-the combine option you will also want to set the values for
-@code{grouplens-prediction-offset} and
-@code{grouplens-score-scale-factor}.
-
-@vindex grouplens-prediction-display
-In either case, GroupLens gives you a few choices for how you would like
-to see your predictions displayed. The display of predictions is
-controlled by the @code{grouplens-prediction-display} variable.
-
-The following are valid values for that variable.
-
-@table @code
-@item prediction-spot
-The higher the prediction, the further to the right an @samp{*} is
-displayed.
-
-@item confidence-interval
-A numeric confidence interval.
-
-@item prediction-bar
-The higher the prediction, the longer the bar.
-
-@item confidence-bar
-Numerical confidence.
-
-@item confidence-spot
-The spot gets bigger with more confidence.
-
-@item prediction-num
-Plain-old numeric value.
-
-@item confidence-plus-minus
-Prediction +/- confidence.
-
-@end table
-
-
-@node GroupLens Variables
-@subsection GroupLens Variables
-
-@table @code
-
-@item gnus-summary-grouplens-line-format
-The summary line format used in GroupLens-enhanced summary buffers. It
-accepts the same specs as the normal summary line format (@pxref{Summary
-Buffer Lines}). The default is @samp{%U%R%z%l%I%(%[%4L: %-23,23n%]%)
-%s\n}.
-
-@item grouplens-bbb-host
-Host running the bbbd server. @samp{grouplens.cs.umn.edu} is the
-default.
-
-@item grouplens-bbb-port
-Port of the host running the bbbd server. The default is 9000.
-
-@item grouplens-score-offset
-Offset the prediction by this value. In other words, subtract the
-prediction value by this number to arrive at the effective score. The
-default is 0.
-
-@item grouplens-score-scale-factor
-This variable allows the user to magnify the effect of GroupLens scores.
-The scale factor is applied after the offset. The default is 1.
-
-@end table
-
-
-@node Advanced Scoring
-@section Advanced Scoring
-
-Scoring on Subjects and From headers is nice enough, but what if you're
-really interested in what a person has to say only when she's talking
-about a particular subject? Or what if you really don't want to
-read what person A has to say when she's following up to person B, but
-want to read what she says when she's following up to person C?
-
-By using advanced scoring rules you may create arbitrarily complex
-scoring patterns.
-
-@menu
-* Advanced Scoring Syntax:: A definition.
-* Advanced Scoring Examples:: What they look like.
-* Advanced Scoring Tips:: Getting the most out of it.
-@end menu
-
-
-@node Advanced Scoring Syntax
-@subsection Advanced Scoring Syntax
-
-Ordinary scoring rules have a string as the first element in the rule.
-Advanced scoring rules have a list as the first element. The second
-element is the score to be applied if the first element evaluated to a
-non-@code{nil} value.
-
-These lists may consist of three logical operators, one redirection
-operator, and various match operators.
-
-Logical operators:
-
-@table @code
-@item &
-@itemx and
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{false}, and then it'll stop. If all arguments
-evaluate to @code{true} values, then this operator will return
-@code{true}.
-
-@item |
-@itemx or
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{true}. If no arguments are @code{true},
-then this operator will return @code{false}.
-
-@item !
-@itemx not
-@itemx ¬
-This logical operator only takes a single argument. It returns the
-logical negation of the value of its argument.
-
-@end table
-
-There is an @dfn{indirection operator} that will make its arguments
-apply to the ancestors of the current article being scored. For
-instance, @code{1-} will make score rules apply to the parent of the
-current article. @code{2-} will make score rules apply to the
-grandparent of the current article. Alternatively, you can write
-@code{^^}, where the number of @code{^}s (carets) says how far back into
-the ancestry you want to go.
-
-Finally, we have the match operators. These are the ones that do the
-real work. Match operators are header name strings followed by a match
-and a match type. A typical match operator looks like @samp{("from"
-"Lars Ingebrigtsen" s)}. The header names are the same as when using
-simple scoring, and the match types are also the same.
+Finally, we have the match operators. These are the ones that do the
+real work. Match operators are header name strings followed by a match
+and a match type. A typical match operator looks like @samp{("from"
+"Lars Ingebrigtsen" s)}. The header names are the same as when using
+simple scoring, and the match types are also the same.
@node Advanced Scoring Examples
when he's talking about Gnus:
@example
+@group
((&
("from" "Lars Ingebrigtsen")
("subject" "Gnus"))
1000)
+@end group
@end example
Quite simple, huh?
@lisp
(defun gnus-decay-score (score)
- "Decay SCORE.
-This is done according to `gnus-score-decay-constant'
+ "Decay SCORE according to `gnus-score-decay-constant'
and `gnus-score-decay-scale'."
- (floor
- (- score
- (* (if (< score 0) 1 -1)
- (min (abs score)
- (max gnus-score-decay-constant
- (* (abs score)
- gnus-score-decay-scale)))))))
+ (let ((n (- score
+ (* (if (< score 0) -1 1)
+ (min (abs score)
+ (max gnus-score-decay-constant
+ (* (abs score)
+ gnus-score-decay-scale)))))))
+ (if (and (featurep 'xemacs)
+ ;; XEmacs' floor can handle only the floating point
+ ;; number below the half of the maximum integer.
+ (> (abs n) (lsh -1 -2)))
+ (string-to-number
+ (car (split-string (number-to-string n) "\\.")))
+ (floor n))))
@end lisp
@vindex gnus-score-decay-scale
@include sieve.texi
@chapter PGG
@include pgg.texi
+@chapter SASL
+@include sasl.texi
@end iflatex
@end iftex
* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
* Fuzzy Matching:: What's the big fuzz?
* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Other modes:: Interaction with other modes.
* Various Various:: Things that are really various.
@end menu
Gnus includes a command to help you while creating your own format
specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
update the spec in question and pop you to a buffer where you can
-examine the resulting lisp code to be run to generate the line.
+examine the resulting Lisp code to be run to generate the line.
Here's an alternative recipe for the group buffer:
@lisp
-;; Create three face types.
+;; @r{Create three face types.}
(setq gnus-face-1 'bold)
(setq gnus-face-3 'italic)
-;; We want the article count to be in
-;; a bold and green face. So we create
-;; a new face called `my-green-bold'.
+;; @r{We want the article count to be in}
+;; @r{a bold and green face. So we create}
+;; @r{a new face called @code{my-green-bold}.}
(copy-face 'bold 'my-green-bold)
-;; Set the color.
+;; @r{Set the color.}
(set-face-foreground 'my-green-bold "ForestGreen")
(setq gnus-face-2 'my-green-bold)
-;; Set the new & fancy format.
+;; @r{Set the new & fancy format.}
(setq gnus-group-line-format
"%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
@end lisp
can often be more convenient to just output the strings, and then worry
about lining up the following text afterwards.
-To do that, Gnus supplies tabulator specs--@samp{%=}. There are two
+To do that, Gnus supplies tabulator specs---@samp{%=}. There are two
different types---@dfn{hard tabulators} and @dfn{soft tabulators}.
@samp{%50=} will insert space characters to pad the line up to column
@node Wide Characters
@subsection Wide Characters
-Proportional fonts in most countries have characters of the same width.
+Fixed width fonts in most countries have characters of the same width.
Some countries, however, use Latin characters mixed with wider
characters---most notable East Asian countries.
may look like:
@example
+@group
split = frame | horizontal | vertical | buffer | form
frame = "(frame " size *split ")"
horizontal = "(horizontal " size *split ")"
buffer = "(" buf-name " " size *[ "point" ] *[ "frame-focus"] ")"
size = number | frame-params
buf-name = group | article | summary ...
+@end group
@end example
The limitations are that the @code{frame} split can only appear as the
@end lisp
You'd typically stick these @code{gnus-add-configuration} calls in your
-@file{.gnus.el} file or in some startup hook---they should be run after
+@file{~/.gnus.el} file or in some startup hook---they should be run after
Gnus has been loaded.
@vindex gnus-always-force-window-configuration
you'll get top speed again. Gnus will save these compiled specs in the
@file{.newsrc.eld} file. (User-defined functions aren't compiled by
this function, though---you should compile them yourself by sticking
-them into the @file{.gnus.el} file and byte-compiling that file.)
+them into the @file{~/.gnus.el} file and byte-compiling that file.)
@node Mode Lines
(gnus-demon-close-connections nil 30)
@end lisp
-Here's a handler that scans for PGP headers every hour when Emacs is
-idle:
+Here's a handler that scans for @acronym{PGP} headers every hour when
+Emacs is idle:
@lisp
(gnus-demon-scan-pgp 60 t)
@end lisp
-This @var{time} parameter and than @var{idle} parameter work together
+This @var{time} parameter and that @var{idle} parameter work together
in a strange, but wonderful fashion. Basically, if @var{idle} is
@code{nil}, then the function will be called every @var{time} minutes.
all the timings in the handlers will be affected.)
So, if you want to add a handler, you could put something like this in
-your @file{.gnus.el} file:
+your @file{~/.gnus.el} file:
@findex gnus-demon-add-handler
@lisp
@code{gnus-demon-add-nntp-close-connection},
@code{gnus-demon-add-scan-timestamps}, @code{gnus-demon-add-rescan}, and
@code{gnus-demon-add-scanmail}. Just put those functions in your
-@file{.gnus.el} if you want those abilities.
+@file{~/.gnus.el} if you want those abilities.
@findex gnus-demon-init
@findex gnus-demon-cancel
@item gnus-nocem-groups
@vindex gnus-nocem-groups
Gnus will look for NoCeM messages in the groups in this list. The
-default is @code{("news.lists.filters" "news.admin.net-abuse.bulletins"
-"alt.nocem.misc" "news.admin.net-abuse.announce")}.
+default is
+@lisp
+("news.lists.filters" "news.admin.net-abuse.bulletins"
+ "alt.nocem.misc" "news.admin.net-abuse.announce")
+@end lisp
@item gnus-nocem-issuers
@vindex gnus-nocem-issuers
There are many people issuing NoCeM messages. This list says what
-people you want to listen to. The default is @code{("Automoose-1"
-"clewis@@ferret.ocunix.on.ca" "cosmo.roadkill" "SpamHippo"
-"hweede@@snafu.de")}; fine, upstanding citizens all of them.
+people you want to listen to. The default is
+@lisp
+("Automoose-1" "clewis@@ferret.ocunix.on.ca"
+ "cosmo.roadkill" "SpamHippo" "hweede@@snafu.de")
+@end lisp
+fine, upstanding citizens all of them.
-Known despammers that you can put in this list are listed at
+Known despammers that you can put in this list are listed at@*
@uref{http://www.xs4all.nl/~rosalind/nocemreg/nocemreg.html}.
You do not have to heed NoCeM messages from all these people---just the
@item gnus-nocem-directory
@vindex gnus-nocem-directory
-This is where Gnus will store its NoCeM cache files. The default is
+This is where Gnus will store its NoCeM cache files. The default is@*
@file{~/News/NoCeM/}.
@item gnus-nocem-expiry-wait
(add-hook 'gnus-summary-mode-hook 'gnus-moderate)
@end lisp
-in your @file{.gnus.el} file.
+in your @file{~/.gnus.el} file.
If you are the moderator of @samp{rec.zoofle}, this is how it's
supposed to work:
@node Image Enhancements
@section Image Enhancements
-XEmacs, as well as Emacs 21, is able to display pictures and stuff, so
-Gnus has taken advantage of that.
+XEmacs, as well as Emacs 21@footnote{Emacs 21 on MS Windows doesn't
+support images yet.}, is able to display pictures and stuff, so Gnus has
+taken advantage of that.
@menu
-* Picons:: How to display pictures of what you're reading.
-* Smileys:: Show all those happy faces the way they were meant to be shown.
* X-Face:: Display a funky, teensy black-and-white image.
+* Face:: Display a funkier, teensier colored image.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* Picons:: How to display pictures of what you're reading.
* XVarious:: Other XEmacsy Gnusey variables.
@end menu
-@node Picons
-@subsection Picons
-
-@iftex
-@iflatex
-\include{picons}
-@end iflatex
-@end iftex
-
-So@dots{} You want to slow down your news reader even more! This is a
-good way to do so. Its also a great way to impress people staring
-over your shoulder as you read news.
-
-What are Picons? To quote directly from the Picons Web site:
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@quotation
-@dfn{Picons} is short for ``personal icons''. They're small,
-constrained images used to represent users and domains on the net,
-organized into databases so that the appropriate image for a given
-e-mail address can be found. Besides users and domains, there are picon
-databases for Usenet newsgroups and weather forecasts. The picons are
-in either monochrome @code{XBM} format or color @code{XPM} and
-@code{GIF} formats.
-@end quotation
-
-@vindex gnus-picon-databases
-For instructions on obtaining and installing the picons databases,
-point your Web browser at
-@uref{http://www.cs.indiana.edu/picons/ftp/index.html}.
-
-If you are using Debian GNU/Linux, saying @samp{apt-get install
-picons.*} will install the picons where Gnus can find them.
-
-To enable displaying picons, simply make sure that
-@code{gnus-picon-databases} points to the directory containing the
-Picons databases.
-
-The following variables offer control over where things are located.
-
-@table @code
-
-@item gnus-picon-databases
-@vindex gnus-picon-databases
-The location of the picons database. This is a list of directories
-containing the @file{news}, @file{domains}, @file{users} (and so on)
-subdirectories. Defaults to @code{("/usr/lib/picon"
-"/usr/local/faces")}.
-
-@item gnus-picon-news-directories
-@vindex gnus-picon-news-directories
-List of subdirectories to search in @code{gnus-picon-databases} for
-newsgroups faces. @code{("news")} is the default.
-
-@item gnus-picon-user-directories
-@vindex gnus-picon-user-directories
-List of subdirectories to search in @code{gnus-picon-databases} for user
-faces. @code{("users" "usenix" "local" "misc")} is the default.
-
-@item gnus-picon-domain-directories
-@vindex gnus-picon-domain-directories
-List of subdirectories to search in @code{gnus-picon-databases} for
-domain name faces. Defaults to @code{("domains")}. Some people may
-want to add @samp{"unknown"} to this list.
-
-@item gnus-picon-file-types
-@vindex gnus-picon-file-types
-Ordered list of suffixes on picon file names to try. Defaults to
-@code{("xpm" "gif" "xbm")} minus those not builtin your Emacs.
-
-@end table
-
-@node Smileys
-@subsection Smileys
-@cindex smileys
-
-@iftex
-@iflatex
-\gnusfig{-3cm}{0.5cm}{\epsfig{figure=ps/BigFace,height=20cm}}
-\input{smiley}
-@end iflatex
-@end iftex
-
-@dfn{Smiley} is a package separate from Gnus, but since Gnus is
-currently the only package that uses Smiley, it is documented here.
-
-In short---to use Smiley in Gnus, put the following in your
-@file{.gnus.el} file:
-
-@lisp
-(setq gnus-treat-display-smileys t)
-@end lisp
-
-Smiley maps text smiley faces---@samp{:-)}, @samp{8-)}, @samp{:-(} and
-the like---to pictures and displays those instead of the text smiley
-faces. The conversion is controlled by a list of regexps that matches
-text and maps that to file names.
-
-@vindex smiley-regexp-alist
-The alist used is specified by the @code{smiley-regexp-alist}
-variable. The first item in each element is the regexp to be matched;
-the second element is the regexp match group that is to be replaced by
-the picture; and the third element is the name of the file to be
-displayed.
-
-The following variables customize where Smiley will look for these
-files:
-
-@table @code
-
-@item smiley-data-directory
-@vindex smiley-data-directory
-Where Smiley will look for smiley faces files.
-
-@item gnus-smiley-file-types
-@vindex gnus-smiley-file-types
-List of suffixes on smiley file names to try.
-
-@end table
-
-
@node X-Face
@subsection X-Face
@cindex x-face
@cindex x-face
@findex gnus-article-display-x-face
-@findex gnus-article-x-face-command
@vindex gnus-article-x-face-command
@vindex gnus-article-x-face-too-ugly
@iftex
@end iftex
@c @anchor{X-Face}
-Decoding an @code{X-Face} header either requires an Emacs that has
+Gnus now uses the internal ELisp-based @code{uncompface} program for
+decoding an @code{X-Face} header normally in Emacs. While it doesn't
+require any other external program, you may feel it is slow if you are
+using a slow machine. In such a case, you can modify the following
+variables:
+
+@table @code
+@item uncompface-use-external
+@vindex uncompface-use-external
+Specify which of the internal or the external decoder should be used.
+@code{nil} means to use the internal ELisp-based @code{uncompface}
+program. @code{t} means to use the external decoder. The default value
+is normally @code{undecided} which means to determine it by checking
+whether the host machine is slow, being controlled by
+@code{uncompface-use-external-threshold} (which see).
+
+@item uncompface-use-external-threshold
+@vindex uncompface-use-external-threshold
+A number of seconds to check whether the host machine is slow. If the
+host takes time larger than this value for decoding an @code{X-Face}
+using the internal ELisp-based @code{uncompface} program, it will be
+changed to using the external decoder. The default is 0.1 seconds.
+@end table
+
+If the internal decoder is invalidated or if you are using XEmacs,
+decoding an @code{X-Face} header either requires an Emacs that has
@samp{compface} support (which most XEmacs versions has), or that you
have @samp{compface} installed on your system. If either is true,
Gnus will default to displaying @code{X-Face} headers.
(Note: @code{x-face} is used in the variable/function names, not
@code{xface}).
-Gnus provides a few convenience functions and variables to allow
-easier insertion of X-Face headers in outgoing messages.
+@noindent
+Face and variable:
-@findex gnus-random-x-face
+@table @code
+@item gnus-x-face
+@vindex gnus-x-face
+Face to show X-Face. The colors from this face are used as the
+foreground and background colors of the displayed X-Faces. The
+default colors are black and white.
+
+@item gnus-face-properties-alist
+@vindex gnus-face-properties-alist
+Alist of image types and properties applied to Face (@pxref{Face}) and
+X-Face images. The default value is @code{((pbm . (:face gnus-x-face))
+(png . nil))} for Emacs or @code{((xface . (:face gnus-x-face)))} for
+XEmacs. Here are examples:
+
+@lisp
+;; Specify the altitude of Face and X-Face images in the From header.
+(setq gnus-face-properties-alist
+ '((pbm . (:face gnus-x-face :ascent 80))
+ (png . (:ascent 80))))
+
+;; Show Face and X-Face images as pressed buttons.
+(setq gnus-face-properties-alist
+ '((pbm . (:face gnus-x-face :relief -2))
+ (png . (:relief -2))))
+@end lisp
+
+@pxref{Image Descriptors, ,Image Descriptors, elisp, The Emacs Lisp
+Reference Manual} for the valid properties for various image types.
+Currently, @code{pbm} is used for X-Face images and @code{png} is used
+for Face images in Emacs. Only the @code{:face} property is effective
+on the @code{xface} image type in XEmacs if it is built with the
+@samp{libcompface} library.
+@end table
+
+Gnus provides a few convenience functions and variables to allow
+easier insertion of X-Face headers in outgoing messages.
+
+@findex gnus-random-x-face
@vindex gnus-convert-pbm-to-x-face-command
@vindex gnus-x-face-directory
@code{gnus-random-x-face} goes through all the @samp{pbm} files in
@code{gnus-convert-image-to-x-face-command} shell command.
Here's how you would typically use the first function. Put something
-like the following in your @file{.gnus.el} file:
+like the following in your @file{~/.gnus.el} file:
@lisp
(setq message-required-news-headers
@end lisp
+@node Face
+@subsection Face
+@cindex face
+
+@c #### FIXME: faces and x-faces'implementations should really be harmonized.
+
+@code{Face} headers are essentially a funkier version of @code{X-Face}
+ones. They describe a 48x48 pixel colored image that's supposed to
+represent the author of the message.
+
+@cindex face
+@findex gnus-article-display-face
+The contents of a @code{Face} header must be a base64 encoded PNG image.
+See @uref{http://quimby.gnus.org/circus/face/} for the precise
+specifications.
+
+The @code{gnus-face-properties-alist} variable affects the appearance of
+displayed Face images. @xref{X-Face}.
+
+Gnus provides a few convenience functions and variables to allow
+easier insertion of Face headers in outgoing messages.
+
+@findex gnus-convert-png-to-face
+@code{gnus-convert-png-to-face} takes a 48x48 PNG image, no longer than
+726 bytes long, and converts it to a face.
+
+@findex gnus-face-from-file
+@vindex gnus-convert-image-to-face-command
+@code{gnus-face-from-file} takes a JPEG file as the parameter, and then
+converts the file to Face format by using the
+@code{gnus-convert-image-to-face-command} shell command.
+
+Here's how you would typically use this function. Put something like the
+following in your @file{~/.gnus.el} file:
+
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(Face . (lambda ()
+ (gnus-face-from-file "~/face.jpg"))))))
+@end lisp
+
+
+@node Smileys
+@subsection Smileys
+@cindex smileys
+
+@iftex
+@iflatex
+\gnusfig{-3cm}{0.5cm}{\epsfig{figure=ps/BigFace,height=20cm}}
+\input{smiley}
+@end iflatex
+@end iftex
+
+@dfn{Smiley} is a package separate from Gnus, but since Gnus is
+currently the only package that uses Smiley, it is documented here.
+
+In short---to use Smiley in Gnus, put the following in your
+@file{~/.gnus.el} file:
+
+@lisp
+(setq gnus-treat-display-smileys t)
+@end lisp
+
+Smiley maps text smiley faces---@samp{:-)}, @samp{8-)}, @samp{:-(} and
+the like---to pictures and displays those instead of the text smiley
+faces. The conversion is controlled by a list of regexps that matches
+text and maps that to file names.
+
+@vindex smiley-regexp-alist
+The alist used is specified by the @code{smiley-regexp-alist}
+variable. The first item in each element is the regexp to be matched;
+the second element is the regexp match group that is to be replaced by
+the picture; and the third element is the name of the file to be
+displayed.
+
+The following variables customize where Smiley will look for these
+files:
+
+@table @code
+
+@item smiley-data-directory
+@vindex smiley-data-directory
+Where Smiley will look for smiley faces files.
+
+@item gnus-smiley-file-types
+@vindex gnus-smiley-file-types
+List of suffixes on smiley file names to try.
+
+@end table
+
+
+@node Picons
+@subsection Picons
+
+@iftex
+@iflatex
+\include{picons}
+@end iflatex
+@end iftex
+
+So@dots{} You want to slow down your news reader even more! This is a
+good way to do so. It's also a great way to impress people staring
+over your shoulder as you read news.
+
+What are Picons? To quote directly from the Picons Web site:
+
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
+
+@quotation
+@dfn{Picons} is short for ``personal icons''. They're small,
+constrained images used to represent users and domains on the net,
+organized into databases so that the appropriate image for a given
+e-mail address can be found. Besides users and domains, there are picon
+databases for Usenet newsgroups and weather forecasts. The picons are
+in either monochrome @code{XBM} format or color @code{XPM} and
+@code{GIF} formats.
+@end quotation
+
+@vindex gnus-picon-databases
+For instructions on obtaining and installing the picons databases,
+point your Web browser at
+@uref{http://www.cs.indiana.edu/picons/ftp/index.html}.
+
+If you are using Debian GNU/Linux, saying @samp{apt-get install
+picons.*} will install the picons where Gnus can find them.
+
+To enable displaying picons, simply make sure that
+@code{gnus-picon-databases} points to the directory containing the
+Picons databases.
+
+The following variables offer control over where things are located.
+
+@table @code
+
+@item gnus-picon-databases
+@vindex gnus-picon-databases
+The location of the picons database. This is a list of directories
+containing the @file{news}, @file{domains}, @file{users} (and so on)
+subdirectories. Defaults to @code{("/usr/lib/picon"
+"/usr/local/faces")}.
+
+@item gnus-picon-news-directories
+@vindex gnus-picon-news-directories
+List of subdirectories to search in @code{gnus-picon-databases} for
+newsgroups faces. @code{("news")} is the default.
+
+@item gnus-picon-user-directories
+@vindex gnus-picon-user-directories
+List of subdirectories to search in @code{gnus-picon-databases} for user
+faces. @code{("users" "usenix" "local" "misc")} is the default.
+
+@item gnus-picon-domain-directories
+@vindex gnus-picon-domain-directories
+List of subdirectories to search in @code{gnus-picon-databases} for
+domain name faces. Defaults to @code{("domains")}. Some people may
+want to add @samp{"unknown"} to this list.
+
+@item gnus-picon-file-types
+@vindex gnus-picon-file-types
+Ordered list of suffixes on picon file names to try. Defaults to
+@code{("xpm" "gif" "xbm")} minus those not built-in your Emacs.
+
+@end table
+
+
@node XVarious
@subsection Various XEmacs Variables
* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
* SpamAssassin:: How to use external anti-spam tools.
* Hashcash:: Reduce spam by burning CPU time.
-* Filtering Spam Using The Spam ELisp Package::
-* Filtering Spam Using Statistics with spam-stat::
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
@end menu
@node The problem of spam
First, some background on spam.
If you have access to e-mail, you are familiar with spam (technically
-termed @acronym{UCE}, Unsolicited Commercial E-mail). Simply put, it exists
-because e-mail delivery is very cheap compared to paper mail, so only
-a very small percentage of people need to respond to an UCE to make it
-worthwhile to the advertiser. Ironically, one of the most common
-spams is the one offering a database of e-mail addresses for further
-spamming. Senders of spam are usually called @emph{spammers}, but terms like
-@emph{vermin}, @emph{scum}, and @emph{morons} are in common use as well.
+termed @acronym{UCE}, Unsolicited Commercial E-mail). Simply put, it
+exists because e-mail delivery is very cheap compared to paper mail,
+so only a very small percentage of people need to respond to an UCE to
+make it worthwhile to the advertiser. Ironically, one of the most
+common spams is the one offering a database of e-mail addresses for
+further spamming. Senders of spam are usually called @emph{spammers},
+but terms like @emph{vermin}, @emph{scum}, @emph{sociopaths}, and
+@emph{morons} are in common use as well.
Spam comes from a wide variety of sources. It is simply impossible to
dispose of all spam without discarding useful messages. A good
requires its users to have a basic understanding of e-mail delivery
and processing.
-The simplest approach to filtering spam is filtering. If you get 200
-spam messages per day from @samp{random-address@@vmadmin.com}, you
-block @samp{vmadmin.com}. If you get 200 messages about
-@samp{VIAGRA}, you discard all messages with @samp{VIAGRA} in the
-message. This, unfortunately, is a great way to discard legitimate
-e-mail. For instance, the very informative and useful RISKS digest
-has been blocked by overzealous mail filters because it
-@strong{contained} words that were common in spam messages.
-Nevertheless, in isolated cases, with great care, direct filtering of
-mail can be useful.
+The simplest approach to filtering spam is filtering, at the mail
+server or when you sort through incoming mail. If you get 200 spam
+messages per day from @samp{random-address@@vmadmin.com}, you block
+@samp{vmadmin.com}. If you get 200 messages about @samp{VIAGRA}, you
+discard all messages with @samp{VIAGRA} in the message. If you get
+lots of spam from Bulgaria, for example, you try to filter all mail
+from Bulgarian IPs.
+
+This, unfortunately, is a great way to discard legitimate e-mail. The
+risks of blocking a whole country (Bulgaria, Norway, Nigeria, China,
+etc.) or even a continent (Asia, Africa, Europe, etc.) from contacting
+you should be obvious, so don't do it if you have the choice.
+
+In another instance, the very informative and useful RISKS digest has
+been blocked by overzealous mail filters because it @strong{contained}
+words that were common in spam messages. Nevertheless, in isolated
+cases, with great care, direct filtering of mail can be useful.
Another approach to filtering e-mail is the distributed spam
processing, for instance DCC implements such a system. In essence,
-@code{N} systems around the world agree that a machine @samp{X} in
-China, Ghana, or California is sending out spam e-mail, and these
-@code{N} systems enter @samp{X} or the spam e-mail from @samp{X} into
-a database. The criteria for spam detection vary - it may be the
-number of messages sent, the content of the messages, and so on. When
-a user of the distributed processing system wants to find out if a
-message is spam, he consults one of those @code{N} systems.
+@var{N} systems around the world agree that a machine @var{X} in
+Ghana, Estonia, or California is sending out spam e-mail, and these
+@var{N} systems enter @var{X} or the spam e-mail from @var{X} into a
+database. The criteria for spam detection vary---it may be the number
+of messages sent, the content of the messages, and so on. When a user
+of the distributed processing system wants to find out if a message is
+spam, he consults one of those @var{N} systems.
Distributed spam processing works very well against spammers that send
a large number of messages at once, but it requires the user to set up
fairly complicated checks. There are commercial and free distributed
spam processing systems. Distributed spam processing has its risks as
well. For instance legitimate e-mail senders have been accused of
-sending spam, and their web sites have been shut down for some time
-because of the incident.
+sending spam, and their web sites and mailing lists have been shut
+down for some time because of the incident.
The statistical approach to spam filtering is also popular. It is
based on a statistical analysis of previous spam messages. Usually
analysis of spam works very well in most of the cases, but it can
classify legitimate e-mail as spam in some cases. It takes time to
run the analysis, the full message must be analyzed, and the user has
-to store the database of spam analyses.
+to store the database of spam analyses. Statistical analysis on the
+server is gaining popularity. This has the advantage of letting the
+user Just Read Mail, but has the disadvantage that it's harder to tell
+the server that it has misclassified mail.
+
+Fighting spam is not easy, no matter what anyone says. There is no
+magic switch that will distinguish Viagra ads from Mom's e-mails.
+Even people are having a hard time telling spam apart from non-spam,
+because spammers are actively looking to fool us into thinking they
+are Mom, essentially. Spamming is irritating, irresponsible, and
+idiotic behavior from a bunch of people who think the world owes them
+a favor. We hope the following sections will help you in fighting the
+spam plague.
@node Anti-Spam Basics
@subsection Anti-Spam Basics
(@pxref{Fancy Mail Splitting}):
@lisp
-(
- ...
+(...
(to "larsi@@trym.ifi.uio.no"
- (| ("subject" "re:.*" "misc")
- ("references" ".*@@.*" "misc")
- "spam"))
- ...
-)
+ (| ("subject" "re:.*" "misc")
+ ("references" ".*@@.*" "misc")
+ "spam"))
+ ...)
@end lisp
This says that all mail to this address is suspect, but if it has a
header, it's probably ok. All the rest goes to the @samp{spam} group.
(This idea probably comes from Tim Pierce.)
-In addition, many mail spammers talk directly to your @sc{smtp} server
+In addition, many mail spammers talk directly to your @acronym{SMTP} server
and do not include your email address explicitly in the @code{To}
header. Why they do this is unknown---perhaps it's to thwart this
thwarting scheme? In any case, this is trivial to deal with---you just
citizen, you can even send off complaints to the proper authorities on
each unsolicited commercial email---at your leisure.
-If you are also a lazy net citizen, you will probably prefer complaining
-automatically with the @file{gnus-junk.el} package, available FOR FREE
-at @* @uref{http://stud2.tuwien.ac.at/~e9426626/gnus-junk.html}.
-Since most e-mail spam is sent automatically, this may reconcile the
-cosmic balance somewhat.
-
This works for me. It allows people an easy way to contact me (they can
just press @kbd{r} in the usual way), and I'm not bothered at all with
spam. It's a win-win situation. Forging @code{From} headers to point
to non-existent domains is yucky, in my opinion.
+Be careful with this approach. Spammers are wise to it.
@node SpamAssassin
@cindex Vipul's Razor
@cindex DCC
-The days where the hints in the previous section was sufficient in
-avoiding spam is coming to an end. There are many tools out there
+The days where the hints in the previous section were sufficient in
+avoiding spam are coming to an end. There are many tools out there
that claim to reduce the amount of spam you get. This section could
easily become outdated fast, as new products replace old, but
fortunately most of these tools seem to have similar interfaces. Even
though this section will use SpamAssassin as an example, it should be
easy to adapt it to most other tools.
+Note that this section does not involve the @code{spam.el} package,
+which is discussed in the next section. If you don't care for all
+the features of @code{spam.el}, you can make do with these simple
+recipes.
+
If the tool you are using is not installed on the mail server, you
need to invoke it yourself. Ideas on how to use the
@code{:postscript} mail source parameter (@pxref{Mail Source
-Specifiers}) follows.
+Specifiers}) follow.
@lisp
(setq mail-sources
'((file :prescript "formail -bs spamassassin < /var/mail/%u")
(pop :user "jrl"
:server "pophost"
- :postscript "mv %t /tmp/foo; formail -bs spamc < /tmp/foo > %t")))
+ :postscript
+ "mv %t /tmp/foo; formail -bs spamc < /tmp/foo > %t")))
@end lisp
-Once you managed to process your incoming spool somehow, thus making
-the mail contain e.g. a header indicating it is spam, you are ready to
+Once you manage to process your incoming spool somehow, thus making
+the mail contain e.g.@: a header indicating it is spam, you are ready to
filter it out. Using normal split methods (@pxref{Splitting Mail}):
@lisp
...))
(defun kevin-spamassassin ()
(save-excursion
- (let ((buf (or (get-buffer " *nnmail incoming*")
- (get-buffer " *nnml move*"))))
- (if (not buf)
- (progn (message "Oops, cannot find message buffer") nil)
- (set-buffer buf)
- (if (eq 1 (call-process-region (point-min) (point-max)
- "spamc" nil nil nil "-c"))
- "spam")))))
+ (save-restriction
+ (widen)
+ (if (eq 1 (call-process-region (point-min) (point-max)
+ "spamc" nil nil nil "-c"))
+ "spam"))))
@end lisp
+Note that with the nnimap backend, message bodies will not be
+downloaded by default. You need to set
+@code{nnimap-split-download-body} to @code{t} to do that
+(@pxref{Splitting in IMAP}).
+
That is about it. As some spam is likely to get through anyway, you
might want to have a nifty function to call when you happen to read
spam. And here is the nifty function:
A novel technique to fight spam is to require senders to do something
costly for each message they send. This has the obvious drawback that
-you cannot rely on that everyone in the world uses this technique,
+you cannot rely on everyone in the world using this technique,
since it is not part of the Internet standards, but it may be useful
in smaller communities.
new form of spam appears. This means that a small percentage of spam
will always get through. It also means that somewhere, someone needs
to read lots of spam to update these tools. Hashcash avoids that, but
-instead requires that everyone you communicate with supports the
+instead prefers that everyone you contact through e-mail supports the
scheme. You can view the two approaches as pragmatic vs dogmatic.
The approaches have their own advantages and disadvantages, but as
often in the real world, a combination of them is stronger than either
The ``something costly'' is to burn CPU time, more specifically to
compute a hash collision up to a certain number of bits. The
resulting hashcash cookie is inserted in a @samp{X-Hashcash:}
-header. For more details, and for the external application
+header. For more details, and for the external application
@code{hashcash} you need to install to use this feature, see
@uref{http://www.cypherspace.org/~adam/hashcash/}. Even more
information can be found at @uref{http://www.camram.org/}.
(add-hook 'message-send-hook 'mail-add-payment)
@end lisp
-The @code{hashcash.el} library can be found at
-@uref{http://users.actrix.gen.nz/mycroft/hashcash.el}, or in the Gnus
-development contrib directory.
+The @file{hashcash.el} library can be found in the Gnus development
+contrib directory or at
+@uref{http://users.actrix.gen.nz/mycroft/hashcash.el}.
You will need to set up some additional variables as well:
@cindex spam filtering
@cindex spam
-The idea behind @code{spam.el} is to have a control center for spam detection
-and filtering in Gnus. To that end, @code{spam.el} does two things: it
-filters incoming mail, and it analyzes mail known to be spam or ham.
-@emph{Ham} is the name used throughout @code{spam.el} to indicate
+The idea behind @file{spam.el} is to have a control center for spam detection
+and filtering in Gnus. To that end, @file{spam.el} does two things: it
+filters new mail, and it analyzes mail known to be spam or ham.
+@dfn{Ham} is the name used throughout @file{spam.el} to indicate
non-spam messages.
-So, what happens when you load @code{spam.el}? First of all, you get
-the following keyboard commands:
+First of all, you @strong{must} run the function
+@code{spam-initialize} to autoload @code{spam.el} and to install the
+@code{spam.el} hooks. There is one exception: if you use the
+@code{spam-use-stat} (@pxref{spam-stat spam filtering}) setting, you
+should turn it on before @code{spam-initialize}:
+
+@example
+(setq spam-use-stat t) ;; if needed
+(spam-initialize)
+@end example
+
+So, what happens when you load @file{spam.el}?
+
+First, some hooks will get installed by @code{spam-initialize}. There
+are some hooks for @code{spam-stat} so it can save its databases, and
+there are hooks so interesting things will happen when you enter and
+leave a group. More on the sequence of events later (@pxref{Spam
+ELisp Package Sequence of Events}).
+
+You get the following keyboard commands:
@table @kbd
@end table
-Also, when you load @code{spam.el}, you will be able to customize its
+Also, when you load @file{spam.el}, you will be able to customize its
variables. Try @code{customize-group} on the @samp{spam} variable
group.
+@menu
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* SpamAssassin backend::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
+@end menu
+
+@node Spam ELisp Package Sequence of Events
+@subsubsection Spam ELisp Package Sequence of Events
+@cindex spam filtering
+@cindex spam filtering sequence of events
+@cindex spam
+
+You must read this section to understand how @code{spam.el} works.
+Do not skip, speed-read, or glance through this section.
+
+There are two @emph{contact points}, if you will, between
+@code{spam.el} and the rest of Gnus: checking new mail for spam, and
+leaving a group.
+
+Getting new mail is done in one of two ways. You can either split
+your incoming mail or you can classify new articles as ham or spam
+when you enter the group.
+
+Splitting incoming mail is better suited to mail backends such as
+@code{nnml} or @code{nnimap} where new mail appears in a single file
+called a @dfn{Spool File}. See @xref{Spam ELisp Package Filtering of
+Incoming Mail}.
+
+@vindex gnus-spam-autodetect
+@vindex gnus-spam-autodetect-methods
+For backends such as @code{nntp} there is no incoming mail spool, so
+an alternate mechanism must be used. This may also happen for
+backends where the server is in charge of splitting incoming mail, and
+Gnus does not do further splitting. The @code{spam-autodetect} and
+@code{spam-autodetect-methods} group parameters (accessible with
+@kbd{G c} and @kbd{G p} as usual), and the corresponding variables
+@code{gnus-spam-autodetect} and @code{gnus-spam-autodetect-methods}
+(accessible with @kbd{M-x customize-variable} as usual) can help.
+
+When @code{spam-autodetect} is used (you can turn it on for a
+group/topic or wholesale by regex, as needed), it hooks into the
+process of entering a group. Thus, entering a group with unseen or
+unread articles becomes the substitute for checking incoming mail.
+Whether only unseen articles or all unread articles will be processed
+is determined by the @code{spam-autodetect-recheck-messages}. When
+set to @code{t}, unread messages will be rechecked.
+
+@code{spam-autodetect} grants the user at once more and less control
+of spam filtering. The user will have more control over each group's
+spam methods, so for instance the @samp{ding} group may have
+@code{spam-use-BBDB} as the autodetection method, while the
+@samp{suspect} group may have the @code{spam-use-blacklist} and
+@code{spam-use-bogofilter} methods enabled. Every article detected to
+be spam will be marked with the spam mark @samp{$} and processed on
+exit from the group as normal spam. The user has less control over
+the @emph{sequence} of checks, as he might with @code{spam-split}.
+
+When the newly split mail goes into groups, or messages are
+autodetected to be ham or spam, those groups must be exited (after
+entering, if needed) for further spam processing to happen. It
+matters whether the group is considered a ham group, a spam group, or
+is unclassified, based on its @code{spam-content} parameter
+(@pxref{Spam ELisp Package Global Variables}). Spam groups have the
+additional characteristic that, when entered, any unseen or unread
+articles (depending on the @code{spam-mark-only-unseen-as-spam}
+variable) will be marked as spam. Thus, mail split into a spam group
+gets automatically marked as spam when you enter the group.
+
+So, when you exit a group, the @code{spam-processors} are applied, if
+any are set, and the processed mail is moved to the
+@code{ham-process-destination} or the @code{spam-process-destination}
+depending on the article's classification. If the
+@code{ham-process-destination} or the @code{spam-process-destination},
+whichever is appropriate, are @code{nil}, the article is left in the
+current group.
+
+If a spam is found in any group (this can be changed to only non-spam
+groups with @code{spam-move-spam-nonspam-groups-only}), it is
+processed by the active @code{spam-processors} (@pxref{Spam ELisp
+Package Global Variables}) when the group is exited. Furthermore, the
+spam is moved to the @code{spam-process-destination} (@pxref{Spam
+ELisp Package Global Variables}) for further training or deletion.
+You have to load the @code{gnus-registry.el} package and enable the
+@code{spam-log-to-registry} variable if you want spam to be processed
+no more than once. Thus, spam is detected and processed everywhere,
+which is what most people want. If the
+@code{spam-process-destination} is @code{nil}, the spam is marked as
+expired, which is usually the right thing to do.
+
+If spam can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+If a ham mail is found in a ham group, as determined by the
+@code{ham-marks} parameter, it is processed as ham by the active ham
+@code{spam-processor} when the group is exited. With the variables
+@code{spam-process-ham-in-spam-groups} and
+@code{spam-process-ham-in-nonham-groups} the behavior can be further
+altered so ham found anywhere can be processed. You have to load the
+@code{gnus-registry.el} package and enable the
+@code{spam-log-to-registry} variable if you want ham to be processed
+no more than once. Thus, ham is detected and processed only when
+necessary, which is what most people want. More on this in
+@xref{Spam ELisp Package Configuration Examples}.
+
+If ham can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+If all this seems confusing, don't worry. Soon it will be as natural
+as typing Lisp one-liners on a neural interface@dots{} err, sorry, that's
+50 years in the future yet. Just trust us, it's not so bad.
+
+@node Spam ELisp Package Filtering of Incoming Mail
+@subsubsection Spam ELisp Package Filtering of Incoming Mail
+@cindex spam filtering
+@cindex spam filtering incoming mail
+@cindex spam
+
+To use the @file{spam.el} facilities for incoming mail filtering, you
+must add the following to your fancy split list
+@code{nnmail-split-fancy} or @code{nnimap-split-fancy}:
+
+@example
+(: spam-split)
+@end example
+
+Note that the fancy split may be called @code{nnmail-split-fancy} or
+@code{nnimap-split-fancy}, depending on whether you use the nnmail or
+nnimap back ends to retrieve your mail.
+
+Also, @code{spam-split} will not modify incoming mail in any way.
+
+The @code{spam-split} function will process incoming mail and send the
+mail considered to be spam into the group name given by the variable
+@code{spam-split-group}. By default that group name is @samp{spam},
+but you can customize @code{spam-split-group}. Make sure the contents
+of @code{spam-split-group} are an @emph{unqualified} group name, for
+instance in an @code{nnimap} server @samp{your-server} the value
+@samp{spam} will turn out to be @samp{nnimap+your-server:spam}. The
+value @samp{nnimap+server:spam}, therefore, is wrong and will
+actually give you the group
+@samp{nnimap+your-server:nnimap+server:spam} which may or may not
+work depending on your server's tolerance for strange group names.
+
+You can also give @code{spam-split} a parameter,
+e.g. @code{spam-use-regex-headers} or @code{"maybe-spam"}. Why is
+this useful?
+
+Take these split rules (with @code{spam-use-regex-headers} and
+@code{spam-use-blackholes} set):
+
+@example
+ nnimap-split-fancy '(|
+ (any "ding" "ding")
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail")
+@end example
+
+Now, the problem is that you want all ding messages to make it to the
+ding folder. But that will let obvious spam (for example, spam
+detected by SpamAssassin, and @code{spam-use-regex-headers}) through,
+when it's sent to the ding list. On the other hand, some messages to
+the ding list are from a mail server in the blackhole list, so the
+invocation of @code{spam-split} can't be before the ding rule.
+
+You can let SpamAssassin headers supersede ding rules, but all other
+@code{spam-split} rules (including a second invocation of the
+regex-headers check) will be after the ding rule:
+
+@example
+nnimap-split-fancy
+ '(|
+ ;; @r{all spam detected by @code{spam-use-regex-headers} goes to @samp{regex-spam}}
+ (: spam-split "regex-spam" 'spam-use-regex-headers)
+ (any "ding" "ding")
+ ;; @r{all other spam detected by spam-split goes to @code{spam-split-group}}
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail")
+@end example
+
+This lets you invoke specific @code{spam-split} checks depending on
+your particular needs, and to target the results of those checks to a
+particular spam group. You don't have to throw all mail into all the
+spam tests. Another reason why this is nice is that messages to
+mailing lists you have rules for don't have to have resource-intensive
+blackhole checks performed on them. You could also specify different
+spam checks for your nnmail split vs. your nnimap split. Go crazy.
+
+You should still have specific checks such as
+@code{spam-use-regex-headers} set to @code{t}, even if you
+specifically invoke @code{spam-split} with the check. The reason is
+that when loading @file{spam.el}, some conditional loading is done
+depending on what @code{spam-use-xyz} variables you have set. This
+is usually not critical, though.
+
+@emph{Note for IMAP users}
+
+The boolean variable @code{nnimap-split-download-body} needs to be
+set, if you want to split based on the whole message instead of just
+the headers. By default, the nnimap back end will only retrieve the
+message headers. If you use @code{spam-check-bogofilter},
+@code{spam-check-ifile}, or @code{spam-check-stat} (the splitters that
+can benefit from the full message body), you should set this variable.
+It is not set by default because it will slow @acronym{IMAP} down, and
+that is not an appropriate decision to make on behalf of the user.
+
+@xref{Splitting in IMAP}.
+
+@emph{TODO: spam.el needs to provide a uniform way of training all the
+statistical databases. Some have that functionality built-in, others
+don't.}
+
+@node Spam ELisp Package Global Variables
+@subsubsection Spam ELisp Package Global Variables
+@cindex spam filtering
+@cindex spam filtering variables
+@cindex spam variables
+@cindex spam
+
+@vindex gnus-spam-process-newsgroups
The concepts of ham processors and spam processors are very important.
Ham processors and spam processors for a group can be set with the
@code{spam-process} group parameter, or the
processors take mail known to be spam and process it so similar spam
will be detected later.
+The format of the spam or ham processor entry used to be a symbol,
+but now it is a @sc{cons} cell. See the individual spam processor entries
+for more information.
+
+@vindex gnus-spam-newsgroup-contents
Gnus learns from the spam you get. You have to collect your spam in
one or more spam groups, and set or customize the variable
@code{spam-junk-mailgroups} as appropriate. You can also declare
considered @emph{unclassified}. All groups are unclassified by
default.
+@vindex gnus-spam-mark
+@cindex $
In spam groups, all messages are considered to be spam by default:
-they get the @samp{$} mark when you enter the group. You must review
-these messages from time to time and remove the @samp{$} mark for
-every message that is not spam after all. To remove the @samp{$}
-mark, you can use @kbd{M-u} to ``unread'' the article, or @kbd{d} for
-declaring it read the non-spam way. When you leave a group, all
-spam-marked (@samp{$}) articles are sent to a spam processor which
-will study them as spam samples.
+they get the @samp{$} mark (@code{gnus-spam-mark}) when you enter the
+group. If you have seen a message, had it marked as spam, then
+unmarked it, it won't be marked as spam when you enter the group
+thereafter. You can disable that behavior, so all unread messages
+will get the @samp{$} mark, if you set the
+@code{spam-mark-only-unseen-as-spam} parameter to @code{nil}. You
+should remove the @samp{$} mark when you are in the group summary
+buffer for every message that is not spam after all. To remove the
+@samp{$} mark, you can use @kbd{M-u} to ``unread'' the article, or
+@kbd{d} for declaring it read the non-spam way. When you leave a
+group, all spam-marked (@samp{$}) articles are sent to a spam
+processor which will study them as spam samples.
Messages may also be deleted in various other ways, and unless
-@code{spam-ham-marks} gets overridden below, marks @samp{R} and
-@samp{r} for default read or explicit delete, marks @samp{X} and
+@code{ham-marks} group parameter gets overridden below, marks @samp{R}
+and @samp{r} for default read or explicit delete, marks @samp{X} and
@samp{K} for automatic or explicit kills, as well as mark @samp{Y} for
low scores, are all considered to be associated with articles which
are not spam. This assumption might be false, in particular if you
use kill files or score files as means for detecting genuine spam, you
-should then adjust the @code{spam-ham-marks} variable.
-
-@defvar spam-ham-marks
-You can customize this variable to be the list of marks you want to
-consider ham. By default, the list contains the deleted, read,
-killed, kill-filed, and low-score marks.
+should then adjust the @code{ham-marks} group parameter.
+
+@defvar ham-marks
+You can customize this group or topic parameter to be the list of
+marks you want to consider ham. By default, the list contains the
+deleted, read, killed, kill-filed, and low-score marks (the idea is
+that these articles have been read, but are not spam). It can be
+useful to also include the tick mark in the ham marks. It is not
+recommended to make the unread mark a ham mark, because it normally
+indicates a lack of classification. But you can do it, and we'll be
+happy for you.
@end defvar
-@defvar spam-spam-marks
-You can customize this variable to be the list of marks you want to
-consider spam. By default, the list contains only the spam mark.
+@defvar spam-marks
+You can customize this group or topic parameter to be the list of
+marks you want to consider spam. By default, the list contains only
+the spam mark. It is not recommended to change that, but you can if
+you really want to.
@end defvar
When you leave @emph{any} group, regardless of its
spam. Best is to make sure that real spam is marked with @samp{$},
and nothing else.
+@vindex gnus-ham-process-destinations
When you leave a @emph{spam} group, all spam-marked articles are
marked as expired after processing with the spam processor. This is
not done for @emph{unclassified} or @emph{ham} groups. Also, any
determined by either the @code{ham-process-destination} group
parameter or a match in the @code{gnus-ham-process-destinations}
variable, which is a list of regular expressions matched with group
-names (it's easiest to customize this variable with
-@code{customize-variable gnus-ham-process-destinations}). The ultimate
-location is a group name. If the @code{ham-process-destination}
-parameter is not set, spam articles are only expired.
+names (it's easiest to customize this variable with @kbd{M-x
+customize-variable @key{RET} gnus-ham-process-destinations}). Each
+group name list is a standard Lisp list, if you prefer to customize
+the variable manually. If the @code{ham-process-destination}
+parameter is not set, ham articles are left in place. If the
+@code{spam-mark-ham-unread-before-move-from-spam-group} parameter is
+set, the ham articles are marked as unread before being moved.
+
+If ham can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+Note that you can use multiples destinations per group or regular
+expression! This enables you to send your ham to a regular mail
+group and to a @emph{ham training} group.
When you leave a @emph{ham} group, all ham-marked articles are sent to
a ham processor, which will study these as non-spam samples.
+@vindex spam-process-ham-in-spam-groups
+By default the variable @code{spam-process-ham-in-spam-groups} is
+@code{nil}. Set it to @code{t} if you want ham found in spam groups
+to be processed. Normally this is not done, you are expected instead
+to send your ham to a ham group and process it there.
+
+@vindex spam-process-ham-in-nonham-groups
+By default the variable @code{spam-process-ham-in-nonham-groups} is
+@code{nil}. Set it to @code{t} if you want ham found in non-ham (spam
+or unclassified) groups to be processed. Normally this is not done,
+you are expected instead to send your ham to a ham group and process
+it there.
+
+@vindex gnus-spam-process-destinations
When you leave a @emph{ham} or @emph{unclassified} group, all
@strong{spam} articles are moved to a location determined by either
the @code{spam-process-destination} group parameter or a match in the
@code{gnus-spam-process-destinations} variable, which is a list of
regular expressions matched with group names (it's easiest to
-customize this variable with @code{customize-variable
-gnus-spam-process-destinations}). The ultimate location is a group
-name. If the @code{spam-process-destination} parameter is not set,
-the spam articles are only expired.
+customize this variable with @kbd{M-x customize-variable @key{RET}
+gnus-spam-process-destinations}). Each group name list is a standard
+Lisp list, if you prefer to customize the variable manually. If the
+@code{spam-process-destination} parameter is not set, the spam
+articles are only expired. The group name is fully qualified, meaning
+that if you see @samp{nntp:servername} before the group name in the
+group buffer then you need it here as well.
+
+If spam can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+Note that you can use multiples destinations per group or regular
+expression! This enables you to send your spam to multiple @emph{spam
+training} groups.
+
+@vindex spam-log-to-registry
+The problem with processing ham and spam is that Gnus doesn't track
+this processing by default. Enable the @code{spam-log-to-registry}
+variable so @code{spam.el} will use @code{gnus-registry.el} to track
+what articles have been processed, and avoid processing articles
+multiple times. Keep in mind that if you limit the number of registry
+entries, this won't work as well as it does without a limit.
+
+@vindex spam-mark-only-unseen-as-spam
+Set this variable if you want only unseen articles in spam groups to
+be marked as spam. By default, it is set. If you set it to
+@code{nil}, unread articles will also be marked as spam.
+
+@vindex spam-mark-ham-unread-before-move-from-spam-group
+Set this variable if you want ham to be unmarked before it is moved
+out of the spam group. This is very useful when you use something
+like the tick mark @samp{!} to mark ham---the article will be placed
+in your @code{ham-process-destination}, unmarked as if it came fresh
+from the mail server.
+
+@vindex spam-autodetect-recheck-messages
+When autodetecting spam, this variable tells @code{spam.el} whether
+only unseen articles or all unread articles should be checked for
+spam. It is recommended that you leave it off.
+
+@node Spam ELisp Package Configuration Examples
+@subsubsection Spam ELisp Package Configuration Examples
+@cindex spam filtering
+@cindex spam filtering configuration examples
+@cindex spam configuration examples
+@cindex spam
-To use the @code{spam.el} facilities for incoming mail filtering, you
-must add the following to your fancy split list
-@code{nnmail-split-fancy} or @code{nnimap-split-fancy}:
+@subsubheading Ted's setup
+From Ted Zlatanov <tzz@@lifelogs.com>.
@example
-(: spam-split)
-@end example
+;; @r{for @code{gnus-registry-split-fancy-with-parent} and spam autodetection}
+;; @r{see @file{gnus-registry.el} for more information}
+(gnus-registry-initialize)
+(spam-initialize)
+
+;; @r{I like @kbd{C-s} for marking spam}
+(define-key gnus-summary-mode-map "\C-s" 'gnus-summary-mark-as-spam)
+
+(setq
+ spam-log-to-registry t ; @r{for spam autodetection}
+ spam-use-BBDB t
+ spam-use-regex-headers t ; @r{catch X-Spam-Flag (SpamAssassin)}
+ ;; @r{all groups with @samp{spam} in the name contain spam}
+ gnus-spam-newsgroup-contents
+ '(("spam" gnus-group-spam-classification-spam))
+ ;; @r{see documentation for these}
+ spam-move-spam-nonspam-groups-only nil
+ spam-mark-only-unseen-as-spam t
+ spam-mark-ham-unread-before-move-from-spam-group t
+ nnimap-split-rule 'nnimap-split-fancy
+ ;; @r{understand what this does before you copy it to your own setup!}
+ nnimap-split-fancy '(|
+ ;; @r{trace references to parents and put in their group}
+ (: gnus-registry-split-fancy-with-parent)
+ ;; @r{this will catch server-side SpamAssassin tags}
+ (: spam-split 'spam-use-regex-headers)
+ (any "ding" "ding")
+ ;; @r{note that spam by default will go to @samp{spam}}
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail"))
+
+;; @r{my parameters, set with @kbd{G p}}
+
+;; @r{all nnml groups, and all nnimap groups except}
+;; @r{@samp{nnimap+mail.lifelogs.com:train} and}
+;; @r{@samp{nnimap+mail.lifelogs.com:spam}: any spam goes to nnimap training,}
+;; @r{because it must have been detected manually}
+
+((spam-process-destination . "nnimap+mail.lifelogs.com:train"))
+
+;; @r{all @acronym{NNTP} groups}
+;; @r{autodetect spam with the blacklist and ham with the BBDB}
+((spam-autodetect-methods spam-use-blacklist spam-use-BBDB)
+;; @r{send all spam to the training group}
+ (spam-process-destination . "nnimap+mail.lifelogs.com:train"))
+
+;; @r{only some @acronym{NNTP} groups, where I want to autodetect spam}
+((spam-autodetect . t))
+
+;; @r{my nnimap @samp{nnimap+mail.lifelogs.com:spam} group}
+
+;; @r{this is a spam group}
+((spam-contents gnus-group-spam-classification-spam)
+
+ ;; @r{any spam (which happens when I enter for all unseen messages,}
+ ;; @r{because of the @code{gnus-spam-newsgroup-contents} setting above), goes to}
+ ;; @r{@samp{nnimap+mail.lifelogs.com:train} unless I mark it as ham}
+
+ (spam-process-destination "nnimap+mail.lifelogs.com:train")
+
+ ;; @r{any ham goes to my @samp{nnimap+mail.lifelogs.com:mail} folder, but}
+ ;; @r{also to my @samp{nnimap+mail.lifelogs.com:trainham} folder for training}
+
+ (ham-process-destination "nnimap+mail.lifelogs.com:mail"
+ "nnimap+mail.lifelogs.com:trainham")
+ ;; @r{in this group, only @samp{!} marks are ham}
+ (ham-marks
+ (gnus-ticked-mark))
+ ;; @r{remembers senders in the blacklist on the way out---this is}
+ ;; @r{definitely not needed, it just makes me feel better}
+ (spam-process (gnus-group-spam-exit-processor-blacklist)))
+
+;; @r{Later, on the @acronym{IMAP} server I use the @samp{train} group for training}
+;; @r{SpamAssassin to recognize spam, and the @samp{trainham} group fora}
+;; @r{recognizing ham---but Gnus has nothing to do with it.}
-Note that the fancy split may be called @code{nnmail-split-fancy} or
-@code{nnimap-split-fancy}, depending on whether you use the nnmail or
-nnimap back ends to retrieve your mail.
+@end example
-The @code{spam-split} function will process incoming mail and send the
-mail considered to be spam into the group name given by the variable
-@code{spam-split-group}. By default that group name is @samp{spam},
-but you can customize it.
+@subsubheading Using @file{spam.el} on an IMAP server with a statistical filter on the server
+From Reiner Steib <reiner.steib@@gmx.de>.
+
+My provider has set up bogofilter (in combination with @acronym{DCC}) on
+the mail server (@acronym{IMAP}). Recognized spam goes to
+@samp{spam.detected}, the rest goes through the normal filter rules,
+i.e. to @samp{some.folder} or to @samp{INBOX}. Training on false
+positives or negatives is done by copying or moving the article to
+@samp{training.ham} or @samp{training.spam} respectively. A cron job on
+the server feeds those to bogofilter with the suitable ham or spam
+options and deletes them from the @samp{training.ham} and
+@samp{training.spam} folders.
+
+With the following entries in @code{gnus-parameters}, @code{spam.el}
+does most of the job for me:
+
+@lisp
+ ("nnimap:spam\\.detected"
+ (gnus-article-sort-functions '(gnus-article-sort-by-chars))
+ (ham-process-destination "nnimap:INBOX" "nnimap:training.ham")
+ (spam-contents gnus-group-spam-classification-spam))
+ ("nnimap:\\(INBOX\\|other-folders\\)"
+ (spam-process-destination . "nnimap:training.spam")
+ (spam-contents gnus-group-spam-classification-ham))
+@end lisp
+
+@itemize
+
+@item @b{The Spam folder:}
+
+In the folder @samp{spam.detected}, I have to check for false positives
+(i.e. legitimate mails, that were wrongly judged as spam by
+bogofilter or DCC).
+
+Because of the @code{gnus-group-spam-classification-spam} entry, all
+messages are marked as spam (with @code{$}). When I find a false
+positive, I mark the message with some other ham mark (@code{ham-marks},
+@ref{Spam ELisp Package Global Variables}). On group exit, those
+messages are copied to both groups, @samp{INBOX} (where I want to have
+the article) and @samp{training.ham} (for training bogofilter) and
+deleted from the @samp{spam.detected} folder.
+
+The @code{gnus-article-sort-by-chars} entry simplifies detection of
+false positives for me. I receive lots of worms (sweN, @dots{}), that all
+have a similar size. Grouping them by size (i.e. chars) makes finding
+other false positives easier. (Of course worms aren't @i{spam}
+(@acronym{UCE}, @acronym{UBE}) strictly speaking. Anyhow, bogofilter is
+an excellent tool for filtering those unwanted mails for me.)
+
+@item @b{Ham folders:}
+
+In my ham folders, I just hit @kbd{S x}
+(@code{gnus-summary-mark-as-spam}) whenever I see an unrecognized spam
+mail (false negative). On group exit, those messages are moved to
+@samp{training.ham}.
+@end itemize
-@emph{Note for IMAP users}
+@subsubheading Reporting spam articles in Gmane groups with @code{spam-report.el}
-The boolean variable @code{nnimap-split-download-body} needs to be
-set, if you want to split based on the whole message instead of just
-the headers. By default, the nnimap backend will only retrieve the
-message headers. If you use spam-check-bogofilter, spam-check-ifile,
-or spam-check-stat (the splitters that can benefit from the full
-message body), you should set this variable. It is not set by default
-because it will slow IMAP down.
+From Reiner Steib <reiner.steib@@gmx.de>.
-@xref{Splitting in IMAP}.
+With following entry in @code{gnus-parameters}, @kbd{S x}
+(@code{gnus-summary-mark-as-spam}) marks articles in @code{gmane.*}
+groups as spam and reports the to Gmane at group exit:
-@emph{TODO: Currently, spam.el only supports insertion of articles
-into a backend. There is no way to tell spam.el that an article is no
-longer spam or ham.}
-
-@emph{TODO: spam.el needs to provide a uniform way of training all the
-statistical databases. Some have that functionality built-in, others
-don't.}
+@lisp
+ ("^gmane\\."
+ (spam-process (gnus-group-spam-exit-processor-report-gmane)))
+@end lisp
-The following are the methods you can use to control the behavior of
-@code{spam-split} and their corresponding spam and ham processors:
-
-@menu
-* Blacklists and Whitelists::
-* BBDB Whitelists::
-* Blackholes::
-* Regular Expressions Header Matching::
-* Bogofilter::
-* ifile spam filtering::
-* spam-stat spam filtering::
-* Extending the spam elisp package::
-@end menu
+Additionally, I use @code{(setq spam-report-gmane-use-article-number nil)}
+because I don't read the groups directly from news.gmane.org, but
+through my local news server (leafnode). I.e. the article numbers are
+not the same as on news.gmane.org, thus @code{spam-report.el} has to check
+the @code{X-Report-Spam} header to find the correct number.
@node Blacklists and Whitelists
@subsubsection Blacklists and Whitelists
added to a group's @code{spam-process} parameter, the senders of
spam-marked articles will be added to the blacklist.
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-blacklist}, it is recommended
+that you use @code{'(spam spam-use-blacklist)}. Everything will work
+the same way, we promise.
+
@end defvar
@defvar gnus-group-ham-exit-processor-whitelist
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, the senders of
ham-marked articles in @emph{ham} groups will be added to the
-whitelist. Note that this ham processor has no effect in @emph{spam}
-or @emph{unclassified} groups.
+whitelist.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-whitelist}, it is recommended
+that you use @code{'(ham spam-use-whitelist)}. Everything will work
+the same way, we promise.
@end defvar
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, the senders of
ham-marked articles in @emph{ham} groups will be added to the
-BBDB. Note that this ham processor has no effect in @emph{spam}
-or @emph{unclassified} groups.
+BBDB.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-BBDB}, it is recommended
+that you use @code{'(ham spam-use-BBDB)}. Everything will work
+the same way, we promise.
+
+@end defvar
+
+@node Gmane Spam Reporting
+@subsubsection Gmane Spam Reporting
+@cindex spam reporting
+@cindex Gmane, spam reporting
+@cindex Gmane, spam reporting
+@cindex spam
+
+@defvar gnus-group-spam-exit-processor-report-gmane
+
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the spam-marked
+articles groups will be reported to the Gmane administrators via a
+HTTP request.
+
+Gmane can be found at @uref{http://gmane.org}.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-report-gmane}, it is recommended
+that you use @code{'(spam spam-use-gmane)}. Everything will work the
+same way, we promise.
+
+@end defvar
+
+@defvar spam-report-gmane-use-article-number
+
+This variable is @code{t} by default. Set it to @code{nil} if you are
+running your own news server, for instance, and the local article
+numbers don't correspond to the Gmane article numbers. When
+@code{spam-report-gmane-use-article-number} is @code{nil},
+@code{spam-report.el} will use the @code{X-Report-Spam} header that
+Gmane provides.
+
+@end defvar
+
+@node Anti-spam Hashcash Payments
+@subsubsection Anti-spam Hashcash Payments
+@cindex spam filtering
+@cindex hashcash, spam filtering
+@cindex spam
+
+@defvar spam-use-hashcash
+
+Similar to @code{spam-use-whitelist} (@pxref{Blacklists and
+Whitelists}), but uses hashcash tokens for whitelisting messages
+instead of the sender address. You must have the @code{hashcash.el}
+package loaded for @code{spam-use-hashcash} to work properly.
+Messages without a hashcash payment token will be sent to the next
+spam-split rule. This is an explicit filter, meaning that unless a
+hashcash token is found, the messages are not assumed to be spam or
+ham.
@end defvar
contains outdated servers.
The blackhole check uses the @code{dig.el} package, but you can tell
-@code{spam.el} to use @code{dns.el} instead for better performance if
-you set @code{spam-use-dig} to nil. It is not recommended at this
-time to set @code{spam-use-dig} to nil despite the possible
-performance improvements, because some users may be unable to use it,
-but you can try it and see if it works for you.
+@file{spam.el} to use @code{dns.el} instead for better performance if
+you set @code{spam-use-dig} to @code{nil}. It is not recommended at
+this time to set @code{spam-use-dig} to @code{nil} despite the
+possible performance improvements, because some users may be unable to
+use it, but you can try it and see if it works for you.
@end defvar
@defvar spam-blackhole-good-server-regex
A regular expression for IPs that should not be checked against the
-blackhole server list. When set to nil, it has no effect.
+blackhole server list. When set to @code{nil}, it has no effect.
@end defvar
for debugging or for curiosity, shows the @emph{spamicity} score of
the current article (between 0.0 and 1.0).
-Bogofilter determines if a message is spam based on an internal
-threshold, set at compilation time. That threshold can't be
-customized.
+Bogofilter determines if a message is spam based on a specific
+threshold. That threshold can be customized, consult the Bogofilter
+documentation.
If the @code{bogofilter} executable is not in your path, Bogofilter
processing will be turned off.
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, spam-marked articles
will be added to the Bogofilter spam database.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-bogofilter}, it is recommended
+that you use @code{'(spam spam-use-bogofilter)}. Everything will work
+the same way, we promise.
@end defvar
@defvar gnus-group-ham-exit-processor-bogofilter
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, the ham-marked
articles in @emph{ham} groups will be added to the Bogofilter database
-of non-spam messages. Note that this ham processor has no effect in
-@emph{spam} or @emph{unclassified} groups.
+of non-spam messages.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-bogofilter}, it is recommended
+that you use @code{'(ham spam-use-bogofilter)}. Everything will work
+the same way, we promise.
@end defvar
@defvar spam-bogofilter-database-directory
@end defvar
-The Bogofilter mail classifier is similar to ifile in intent and
+The Bogofilter mail classifier is similar to @command{ifile} in intent and
purpose. A ham and a spam processor are provided, plus the
@code{spam-use-bogofilter} and @code{spam-use-bogofilter-headers}
variables to indicate to spam-split that Bogofilter should either be
used, or has already been used on the article. The 0.9.2.1 version of
Bogofilter was used to test this functionality.
+@node SpamAssassin backend
+@subsubsection SpamAssassin backend
+@cindex spam filtering
+@cindex spamassassin, spam filtering
+@cindex spam
+
+@defvar spam-use-spamassassin
+
+Set this variable if you want @code{spam-split} to use SpamAssassin.
+
+SpamAssassin assigns a score to each article based on a set of rules
+and tests, including a Bayesian filter. The Bayesian filter can be
+trained by associating the @samp{$} mark for spam articles. The
+spam score can be viewed by using the command @kbd{S t} in summary
+mode.
+
+If you set this variable, each article will be processed by
+SpamAssassin when @code{spam-split} is called. If your mail is
+preprocessed by SpamAssassin, and you want to just use the
+SpamAssassin headers, set @code{spam-use-spamassassin-headers}
+instead.
+
+You should not enable this is you use
+@code{spam-use-spamassassin-headers}.
+
+@end defvar
+
+@defvar spam-use-spamassassin-headers
+
+Set this variable if your mail is preprocessed by SpamAssassin and
+want @code{spam-split} to split based on the SpamAssassin headers.
+
+You should not enable this is you use @code{spam-use-spamassassin}.
+
+@end defvar
+
+@defvar spam-spamassassin-path
+
+This variable points to the SpamAssassin executable. If you have
+@code{spamd} running, you can set this variable to the @code{spamc}
+executable for faster processing. See the SpamAssassin documentation
+for more information on @code{spamd}/@code{spamc}.
+
+@end defvar
+
+SpamAssassin is a powerful and flexible spam filter that uses a wide
+variety of tests to identify spam. A ham and a spam processors are
+provided, plus the @code{spam-use-spamassassin} and
+@code{spam-use-spamassassin-headers} variables to indicate to
+spam-split that SpamAssassin should be either used, or has already
+been used on the article. The 2.63 version of SpamAssassin was used
+to test this functionality.
+
@node ifile spam filtering
@subsubsection ifile spam filtering
@cindex spam filtering
@defvar spam-use-ifile
-Enable this variable if you want @code{spam-split} to use ifile, a
+Enable this variable if you want @code{spam-split} to use @command{ifile}, a
statistical analyzer similar to Bogofilter.
@end defvar
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, the spam-marked
articles will be added to the spam-stat database of spam messages.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-stat}, it is recommended
+that you use @code{'(spam spam-use-stat)}. Everything will work
+the same way, we promise.
@end defvar
@defvar gnus-group-ham-exit-processor-stat
@code{gnus-spam-process-newsgroups} variable. When this symbol is
added to a group's @code{spam-process} parameter, the ham-marked
articles in @emph{ham} groups will be added to the spam-stat database
-of non-spam messages. Note that this ham processor has no effect in
-@emph{spam} or @emph{unclassified} groups.
+of non-spam messages.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-stat}, it is recommended
+that you use @code{'(ham spam-use-stat)}. Everything will work
+the same way, we promise.
@end defvar
-This enables spam.el to cooperate with spam-stat.el. spam-stat.el
-provides an internal (Lisp-only) spam database, which unlike ifile or
-Bogofilter does not require external programs. A spam and a ham
-processor, and the @code{spam-use-stat} variable for @code{spam-split}
-are provided.
+This enables @file{spam.el} to cooperate with @file{spam-stat.el}.
+@file{spam-stat.el} provides an internal (Lisp-only) spam database,
+which unlike ifile or Bogofilter does not require external programs.
+A spam and a ham processor, and the @code{spam-use-stat} variable for
+@code{spam-split} are provided.
-@node Extending the spam elisp package
-@subsubsection Extending the spam elisp package
+@node SpamOracle
+@subsubsection Using SpamOracle with Gnus
+@cindex spam filtering
+@cindex SpamOracle
+@cindex spam
+
+An easy way to filter out spam is to use SpamOracle. SpamOracle is an
+statistical mail filtering tool written by Xavier Leroy and needs to be
+installed separately.
+
+There are several ways to use SpamOracle with Gnus. In all cases, your
+mail is piped through SpamOracle in its @emph{mark} mode. SpamOracle will
+then enter an @samp{X-Spam} header indicating whether it regards the
+mail as a spam mail or not.
+
+One possibility is to run SpamOracle as a @code{:prescript} from the
+@xref{Mail Source Specifiers}, (@pxref{SpamAssassin}). This method has
+the advantage that the user can see the @emph{X-Spam} headers.
+
+The easiest method is to make @file{spam.el} (@pxref{Filtering Spam
+Using The Spam ELisp Package}) call SpamOracle.
+
+@vindex spam-use-spamoracle
+To enable SpamOracle usage by @file{spam.el}, set the variable
+@code{spam-use-spamoracle} to @code{t} and configure the
+@code{nnmail-split-fancy} or @code{nnimap-split-fancy} as described in
+the section @xref{Filtering Spam Using The Spam ELisp Package}. In
+this example the @samp{INBOX} of an nnimap server is filtered using
+SpamOracle. Mails recognized as spam mails will be moved to
+@code{spam-split-group}, @samp{Junk} in this case. Ham messages stay
+in @samp{INBOX}:
+
+@example
+(setq spam-use-spamoracle t
+ spam-split-group "Junk"
+ nnimap-split-inbox '("INBOX")
+ nnimap-split-rule 'nnimap-split-fancy
+ nnimap-split-fancy '(| (: spam-split) "INBOX"))
+@end example
+
+@defvar spam-use-spamoracle
+Set to @code{t} if you want Gnus to enable spam filtering using
+SpamOracle.
+@end defvar
+
+@defvar spam-spamoracle-binary
+Gnus uses the SpamOracle binary called @file{spamoracle} found in the
+user's PATH. Using the variable @code{spam-spamoracle-binary}, this
+can be customized.
+@end defvar
+
+@defvar spam-spamoracle-database
+By default, SpamOracle uses the file @file{~/.spamoracle.db} as a database to
+store its analyses. This is controlled by the variable
+@code{spam-spamoracle-database} which defaults to @code{nil}. That means
+the default SpamOracle database will be used. In case you want your
+database to live somewhere special, set
+@code{spam-spamoracle-database} to this path.
+@end defvar
+
+SpamOracle employs a statistical algorithm to determine whether a
+message is spam or ham. In order to get good results, meaning few
+false hits or misses, SpamOracle needs training. SpamOracle learns the
+characteristics of your spam mails. Using the @emph{add} mode
+(training mode) one has to feed good (ham) and spam mails to
+SpamOracle. This can be done by pressing @kbd{|} in the Summary buffer
+and pipe the mail to a SpamOracle process or using @file{spam.el}'s
+spam- and ham-processors, which is much more convenient. For a
+detailed description of spam- and ham-processors, @xref{Filtering Spam
+Using The Spam ELisp Package}.
+
+@defvar gnus-group-spam-exit-processor-spamoracle
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameter or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is added
+to a group's @code{spam-process} parameter, spam-marked articles will be
+sent to SpamOracle as spam samples.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-spamoracle}, it is recommended
+that you use @code{'(spam spam-use-spamoracle)}. Everything will work
+the same way, we promise.
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-spamoracle
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameter or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is added
+to a group's @code{spam-process} parameter, the ham-marked articles in
+@emph{ham} groups will be sent to the SpamOracle as samples of ham
+messages.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-spamoracle}, it is recommended
+that you use @code{'(ham spam-use-spamoracle)}. Everything will work
+the same way, we promise.
+@end defvar
+
+@emph{Example:} These are the Group Parameters of a group that has been
+classified as a ham group, meaning that it should only contain ham
+messages.
+@example
+ ((spam-contents gnus-group-spam-classification-ham)
+ (spam-process ((ham spam-use-spamoracle)
+ (spam spam-use-spamoracle))))
+@end example
+For this group the @code{spam-use-spamoracle} is installed for both
+ham and spam processing. If the group contains spam message
+(e.g. because SpamOracle has not had enough sample messages yet) and
+the user marks some messages as spam messages, these messages will be
+processed by SpamOracle. The processor sends the messages to
+SpamOracle as new samples for spam.
+
+@node Extending the Spam ELisp package
+@subsubsection Extending the Spam ELisp package
@cindex spam filtering
@cindex spam elisp package, extending
@cindex extending the spam elisp package
@enumerate
@item
-code
+Code
@lisp
(defvar spam-use-blackbox nil
@end lisp
Add
-@example
- (spam-use-blackbox . spam-check-blackbox)
-@end example
+@lisp
+(spam-use-blackbox . spam-check-blackbox)
+@end lisp
to @code{spam-list-of-checks}.
+Add
+@lisp
+(gnus-group-ham-exit-processor-blackbox ham spam-use-blackbox)
+(gnus-group-spam-exit-processor-blackbox spam spam-use-blackbox)
+@end lisp
+
+to @code{spam-list-of-processors}.
+
+Add
+@lisp
+(spam-use-blackbox spam-blackbox-register-routine
+ nil
+ spam-blackbox-unregister-routine
+ nil)
+@end lisp
+
+to @code{spam-registration-functions}. Write the register/unregister
+routines using the bogofilter register/unregister routines as a
+start, or other restister/unregister routines more appropriate to
+Blackbox.
+
@item
-functionality
+Functionality
Write the @code{spam-check-blackbox} function. It should return
-@samp{nil} or @code{spam-split-group}. See the existing
-@code{spam-check-*} functions for examples of what you can do.
+@samp{nil} or @code{spam-split-group}, observing the other
+conventions. See the existing @code{spam-check-*} functions for
+examples of what you can do, and stick to the template unless you
+fully understand the reasons why you aren't.
Make sure to add @code{spam-use-blackbox} to
@code{spam-list-of-statistical-checks} if Blackbox is a statistical
@enumerate
@item
-code
+Code
Note you don't have to provide a spam or a ham processor. Only
provide them if Blackbox supports spam or ham processing.
+Also, ham and spam processors are being phased out as single
+variables. Instead the form @code{'(spam spam-use-blackbox)} or
+@code{'(ham spam-use-blackbox)} is favored. For now, spam/ham
+processor variables are still around but they won't be for long.
+
@lisp
-(defvar gnus-group-spam-exit-processor-blackbox "blackbox"
+(defvar gnus-group-spam-exit-processor-blackbox "blackbox-spam"
"The Blackbox summary exit spam processor.
Only applicable to spam groups.")
-(defvar gnus-group-ham-exit-processor-blackbox "blackbox"
+(defvar gnus-group-ham-exit-processor-blackbox "blackbox-ham"
"The whitelist summary exit ham processor.
Only applicable to non-spam (unclassified and ham) groups.")
@end lisp
@item
-functionality
+Gnus parameters
+
+Add
+@lisp
+(const :tag "Spam: Blackbox" (spam spam-use-blackbox))
+(const :tag "Ham: Blackbox" (ham spam-use-blackbox))
+@end lisp
+to the @code{spam-process} group parameter in @code{gnus.el}. Make
+sure you do it twice, once for the parameter and once for the
+variable customization.
+Add
@lisp
-(defun spam-blackbox-register-spam-routine ()
- (spam-generic-register-routine
- ;; the spam function
- (lambda (article)
- (let ((from (spam-fetch-field-from-fast article)))
- (when (stringp from)
- (blackbox-do-something-with-this-spammer from))))
- ;; the ham function
- nil))
-
-(defun spam-blackbox-register-ham-routine ()
- (spam-generic-register-routine
- ;; the spam function
- nil
- ;; the ham function
- (lambda (article)
- (let ((from (spam-fetch-field-from-fast article)))
- (when (stringp from)
- (blackbox-do-something-with-this-ham-sender from))))))
+(variable-item spam-use-blackbox)
@end lisp
-
-Write the @code{blackbox-do-something-with-this-ham-sender} and
-@code{blackbox-do-something-with-this-spammer} functions. You can add
-more complex code than fetching the message sender, but keep in mind
-that retrieving the whole message takes significantly longer than the
-sender through @code{spam-fetch-field-from-fast}, because the message
-senders are kept in memory by Gnus.
+to the @code{spam-autodetect-methods} group parameter in
+@code{gnus.el}.
@end enumerate
this dictionary in your fancy mail splitting rules.
@menu
-* Creating a spam-stat dictionary::
-* Splitting mail using spam-stat::
-* Low-level interface to the spam-stat dictionary::
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
@end menu
@node Creating a spam-stat dictionary
@file{~/Mail/mail/misc} (this usually corresponds the the group
@samp{nnml:mail.misc}).
-When you are using IMAP, you won't have the mails available locally,
-so that will not work. One solution is to use the Gnus Agent to cache
-the articles. Then you can use directories such as
+When you are using @acronym{IMAP}, you won't have the mails available
+locally, so that will not work. One solution is to use the Gnus Agent
+to cache the articles. Then you can use directories such as
@file{"~/News/agent/nnimap/mail.yourisp.com/personal_spam"} for
@code{spam-stat-process-spam-directory}. @xref{Agent as Cache}.
@defvar spam-stat
-This variable holds the hash-table with all the statistics -- the
+This variable holds the hash-table with all the statistics---the
dictionary we have been talking about. For every word in either
collection, this hash-table stores a vector describing how often the
word appeared in spam and often it appeared in non-spam mails.
@subsubsection Splitting mail using spam-stat
In order to use @code{spam-stat} to split your mail, you need to add the
-following to your @file{~/.gnus} file:
+following to your @file{~/.gnus.el} file:
@lisp
(require 'spam-stat)
@lisp
(setq nnmail-split-fancy
`(| (: spam-stat-split-fancy)
- "mail.misc"))
+ "mail.misc"))
@end lisp
@defvar spam-stat-split-fancy-spam-group
@lisp
(setq nnmail-split-fancy
`(| ("Subject" "\\bspam-stat\\b" "mail.emacs")
- (: spam-stat-split-fancy)
- "mail.misc"))
+ (: spam-stat-split-fancy)
+ "mail.misc"))
@end lisp
If you want to filter for spam first, then you must be careful when
(setq nnmail-split-fancy
`(| (: spam-stat-split-fancy)
("Subject" "\\bspam-stat\\b" "mail.emacs")
- "mail.misc"))
+ "mail.misc"))
@end lisp
You can combine this with traditional filtering. Here, we move all
@lisp
(setq nnmail-split-fancy
`(| ("Content-Type" "text/html" "mail.spam.filtered")
- (: spam-stat-split-fancy)
+ (: spam-stat-split-fancy)
("Subject" "\\bspam-stat\\b" "mail.emacs")
- "mail.misc"))
+ "mail.misc"))
@end lisp
@end defun
Make sure you load the dictionary before using it. This requires the
-following in your @file{~/.gnus} file:
+following in your @file{~/.gnus.el} file:
@lisp
(require 'spam-stat)
Typical test will involve calls to the following functions:
-@example
+@smallexample
Reset: (setq spam-stat (make-hash-table :test 'equal))
Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
Number of words: (hash-table-count spam-stat)
Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
-@end example
+@end smallexample
Here is how you would create your dictionary:
-@example
+@smallexample
Reset: (setq spam-stat (make-hash-table :test 'equal))
Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
Repeat for any other non-spam group you need...
Reduce table size: (spam-stat-reduce-size)
Save table: (spam-stat-save)
-@end example
+@end smallexample
+
+@node Other modes
+@section Interaction with other modes
+
+@subsection Dired
+@cindex dired
+
+@code{gnus-dired-minor-mode} provided some useful functions for dired
+buffers. It is enabled with
+@lisp
+(add-hook 'dired-mode-hook 'turn-on-gnus-dired-mode)
+@end lisp
+
+@table @kbd
+@item C-c C-m C-a
+@findex gnus-dired-attach
+Send dired's marked files as an attachment (@code{gnus-dired-attach}).
+You will be prompted for a message buffer.
+
+@item C-c C-m C-l
+@findex gnus-dired-find-file-mailcap
+Visit a file according to the appropriate mailcap entry
+(@code{gnus-dired-find-file-mailcap}). With prefix, open file in a new
+buffer.
+
+@item C-c C-m C-p
+@findex gnus-dired-print
+Print file according to the mailcap entry (@code{gnus-dired-print}). If
+there is no print command, print in a PostScript image.
+@end table
@node Various Various
@section Various Various
@item gnus-directory
@vindex gnus-directory
Most Gnus storage file and directory variables will be initialized from
-this variable, which defaults to the @samp{SAVEDIR} environment
+this variable, which defaults to the @env{SAVEDIR} environment
variable, or @file{~/News/} if that variable isn't set.
-Note that Gnus is mostly loaded when the @file{.gnus.el} file is read.
+Note that Gnus is mostly loaded when the @file{~/.gnus.el} file is read.
This means that other directory variables that are initialized from this
variable won't be set properly if you set this variable in
-@file{.gnus.el}. Set this variable in @file{.emacs} instead.
+@file{~/.gnus.el}. Set this variable in @file{.emacs} instead.
@item gnus-default-directory
@vindex gnus-default-directory
on your system (you OS/2 user you), you could say something like:
@lisp
+@group
(setq nnheader-file-name-translation-alist
'((?: . ?_)))
+@end group
@end lisp
In fact, this is the default value for this variable on OS/2 and MS
@samp{:} in a group name, which is normally used to delimit method and
group).
-@sc{imap} users might want to allow @samp{/} in group names though.
+@acronym{IMAP} users might want to allow @samp{/} in group names though.
@end table
* Troubleshooting:: What you might try if things do not work.
* Gnus Reference Guide:: Rilly, rilly technical stuff.
* Emacs for Heathens:: A short introduction to Emacsian terms.
-* Frequently Asked Questions::
+* Frequently Asked Questions:: The Gnus FAQ
@end menu
@node XEmacs
@section XEmacs
@cindex XEmacs
-@cindex Installing under XEmacs
+@cindex installing under XEmacs
XEmacs is distributed as a collection of packages. You should install
whatever packages the Gnus XEmacs package requires. The current
-requirements are @samp{gnus}, @samp{w3}, @samp{mh-e},
-@samp{mailcrypt}, @samp{rmail}, @samp{eterm}, @samp{mail-lib},
-@samp{xemacs-base}, @samp{sh-script} and @samp{fsf-compat}. The
-@samp{misc-games} package is required for Morse decoding.
+requirements are @samp{gnus}, @samp{mail-lib}, @samp{xemacs-base},
+@samp{eterm}, @samp{sh-script}, @samp{net-utils}, @samp{os-utils},
+@samp{dired}, @samp{mh-e}, @samp{sieve}, @samp{ps-print}, @samp{w3},
+@samp{pgg}, @samp{mailcrypt}, @samp{ecrypto}, and @samp{sasl}.
@node History
In addition to the versions of Gnus which have had their releases
coordinated by Lars, one major development has been Semi-gnus from
-Japan. It's based on a library called @sc{semi}, which provides
-@sc{mime} capabilities.
+Japan. It's based on a library called @acronym{SEMI}, which provides
+@acronym{MIME} capabilities.
These Gnusae are based mainly on Gnus 5.6 and Pterodactyl Gnus.
Collectively, they are called ``Semi-gnus'', and different strains are
called T-gnus, ET-gnus, Nana-gnus and Chaos. These provide powerful
-@sc{mime} and multilingualization things, especially important for
+@acronym{MIME} and multilingualization things, especially important for
Japanese users.
look into implementing the changes when the draft is accepted as an RFC.
@item MIME - RFC 2045-2049 etc
-@cindex MIME
-All the various @sc{mime} RFCs are supported.
+@cindex @acronym{MIME}
+All the various @acronym{MIME} RFCs are supported.
@item Disposition Notifications - RFC 2298
Message Mode is able to request notifications from the receiver.
@item PGP - RFC 1991 and RFC 2440
@cindex RFC 1991
@cindex RFC 2440
-RFC 1991 is the original PGP message specification, published as a
-Information RFC. RFC 2440 was the follow-up, now called Open PGP, and
-put on the Standards Track. Both document a non-@sc{mime} aware PGP
-format. Gnus supports both encoding (signing and encryption) and
-decoding (verification and decryption).
+RFC 1991 is the original @acronym{PGP} message specification,
+published as an informational RFC. RFC 2440 was the follow-up, now
+called Open PGP, and put on the Standards Track. Both document a
+non-@acronym{MIME} aware @acronym{PGP} format. Gnus supports both
+encoding (signing and encryption) and decoding (verification and
+decryption).
@item PGP/MIME - RFC 2015/3156
RFC 2015 (superseded by 3156 which references RFC 2440 instead of RFC
-1991) describes the @sc{mime}-wrapping around the RF 1991/2440 format.
+1991) describes the @acronym{MIME}-wrapping around the RF 1991/2440 format.
Gnus supports both encoding and decoding.
@item S/MIME - RFC 2633
-RFC 2633 describes the @sc{s/mime} format.
+RFC 2633 describes the @acronym{S/MIME} format.
@item IMAP - RFC 1730/2060, RFC 2195, RFC 2086, RFC 2359, RFC 2595, RFC 1731
-RFC 1730 is @sc{imap} version 4, updated somewhat by RFC 2060 (@sc{imap} 4
-revision 1). RFC 2195 describes CRAM-MD5 authentication for @sc{imap}. RFC
-2086 describes access control lists (ACLs) for @sc{imap}. RFC 2359
-describes a @sc{imap} protocol enhancement. RFC 2595 describes the proper
-TLS integration (STARTTLS) with @sc{imap}. RFC 1731 describes the
-GSSAPI/Kerberos4 mechanisms for @sc{imap}.
+RFC 1730 is @acronym{IMAP} version 4, updated somewhat by RFC 2060
+(@acronym{IMAP} 4 revision 1). RFC 2195 describes CRAM-MD5
+authentication for @acronym{IMAP}. RFC 2086 describes access control
+lists (ACLs) for @acronym{IMAP}. RFC 2359 describes a @acronym{IMAP}
+protocol enhancement. RFC 2595 describes the proper @acronym{TLS}
+integration (STARTTLS) with @acronym{IMAP}. RFC 1731 describes the
+GSSAPI/Kerberos4 mechanisms for @acronym{IMAP}.
@end table
@cindex Mule
@cindex Emacs
-Gnus should work on :
+Gnus should work on:
@itemize @bullet
@item
-Emacs 20.3 and up.
+Emacs 21.1 and up.
@item
-XEmacs 20.4 and up.
+XEmacs 21.4 and up.
@end itemize
@item
Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el, webmail.el,
-nnwarchive and many, many other things connected with @sc{mime} and
+nnwarchive and many, many other things connected with @acronym{MIME} and
other types of en/decoding, as well as general bug fixing, new
functionality and stuff.
Joe Reiss---creator of the smiley faces.
@item
-Justin Sheehy--the FAQ maintainer.
+Justin Sheehy---the @acronym{FAQ} maintainer.
@item
Erik Naggum---help, ideas, support, code and stuff.
Kim-Minh Kaplan---further work on the picon code.
@item
-Brad Miller---@file{gnus-gl.el} and the GroupLens manual section
-(@pxref{GroupLens}).
+Brad Miller---@file{gnus-gl.el} and the GroupLens manual section.
@item
Sudish Joseph---innumerable bug fixes.
Kevin Davidson---came up with the name @dfn{ding}, so blame him.
@item
-François Pinard---many, many interesting and thorough bug reports, as
+Fran@,{c}ois Pinard---many, many interesting and thorough bug reports, as
well as autoconf support.
@end itemize
Christopher Davis,
Andrew Eskilsson,
Kai Grossjohann,
-David Kågedal,
+Kevin Greiner,
+Jesper Harder,
+Paul Jarc,
+Simon Josefsson,
+David K@aa{}gedal,
Richard Pieri,
Fabrice Popineau,
Daniel Quinlan,
+Michael Shields,
+Reiner Steib,
Jason L. Tibbitts, III,
+Jack Vinson,
+Katsumi Yamaoka, @c Yamaoka
and
-Jack Vinson.
+Teodor Zlatanov.
Also thanks to the following for patches and stuff:
Magnus Hammerin,
Kenichi Handa, @c Handa
Raja R. Harinath,
-Yoshiki Hayashi, @c ?
+Yoshiki Hayashi, @c Hayashi
P. E. Jareth Hein,
Hisashige Kenji, @c Hisashige
Scott Hofmann,
Richard Hoskins,
Brad Howes,
Miguel de Icaza,
-François Felix Ingrand,
-Tatsuya Ichikawa, @c ?
+Fran@,{c}ois Felix Ingrand,
+Tatsuya Ichikawa, @c Ichikawa
Ishikawa Ichiro, @c Ishikawa
Lee Iverson,
Iwamuro Motonori, @c Iwamuro
Randell Jesup,
Fred Johansen,
Gareth Jones,
-Simon Josefsson,
Greg Klanderman,
Karl Kleinpaste,
Michael Klingbeil,
Christoph Wedler,
Joe Wells,
Lee Willis,
-Katsumi Yamaoka @c Yamaoka
and
Lloyd Zusman.
* Red Gnus:: Third time best---Gnus 5.4/5.5.
* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* No Gnus:: Lars, FIXME!
@end menu
These lists are, of course, just @emph{short} overviews of the
(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
@item
-Local spool and several @sc{nntp} servers can be used at once
+Local spool and several @acronym{NNTP} servers can be used at once
(@pxref{Select Methods}).
@item
read if your machine should go down (@pxref{Auto Save}).
@item
-Gnus now has its own startup file (@file{.gnus.el}) to avoid cluttering up
-the @file{.emacs} file.
+Gnus now has its own startup file (@file{~/.gnus.el}) to avoid
+cluttering up the @file{.emacs} file.
@item
You can set the process mark on both groups and articles and perform
glitches (@pxref{Finding the Parent}).
@item
-Gnus can fetch FAQs and group descriptions (@pxref{Group Information}).
+Gnus can fetch @acronym{FAQ}s and group descriptions (@pxref{Group Information}).
@item
Digests (and other files) can be used as the basis for groups
referred.
@item
-Gnus can make use of GroupLens predictions (@pxref{GroupLens}).
+Gnus can make use of GroupLens predictions.
@item
Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
Marks}).
@item
-A new mail-to-news back end makes it possible to post even when the @sc{nntp}
+A new mail-to-news back end makes it possible to post even when the @acronym{NNTP}
server doesn't allow posting (@pxref{Mail-To-News Gateways}).
@item
@item
New functionality for using Gnus as an offline newsreader has been
-added. A plethora of new commands and modes have been added. See
-@pxref{Gnus Unplugged} for the full story.
+added. A plethora of new commands and modes have been added.
+@xref{Gnus Unplugged}, for the full story.
@item
- The @code{nndraft} back end has returned, but works differently than
+The @code{nndraft} back end has returned, but works differently than
before. All Message buffers are now also articles in the @code{nndraft}
group, which is created automatically.
values.
@item
- @code{gnus-summary-goto-article} now accept Message-ID's.
+@code{gnus-summary-goto-article} now accept Message-ID's.
@item
- A new Message command for deleting text in the body of a message
+A new Message command for deleting text in the body of a message
outside the region: @kbd{C-c C-v}.
@item
- You can now post to component group in @code{nnvirtual} groups with
+You can now post to component group in @code{nnvirtual} groups with
@kbd{C-u C-c C-c}.
@item
@code{nntp-rlogin-program}---new variable to ease customization.
@item
- @code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
+@code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
re-highlighting of the article buffer.
@item
- New element in @code{gnus-boring-article-headers}---@code{long-to}.
+New element in @code{gnus-boring-article-headers}---@code{long-to}.
@item
- @kbd{M-i} symbolic prefix command. See the section ``Symbolic
-Prefixes'' in the Gnus manual for details.
+@kbd{M-i} symbolic prefix command. @xref{Symbolic Prefixes}, for
+details.
@item
- @kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
+@kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
@kbd{a} to add the score rule to the @file{all.SCORE} file.
@item
- @code{gnus-simplify-subject-functions} variable to allow greater
+@code{gnus-simplify-subject-functions} variable to allow greater
control over simplification.
@item
- @kbd{A T}---new command for fetching the current thread.
+@kbd{A T}---new command for fetching the current thread.
@item
- @kbd{/ T}---new command for including the current thread in the
+@kbd{/ T}---new command for including the current thread in the
limit.
@item
- @kbd{M-RET} is a new Message command for breaking cited text.
+@kbd{M-RET} is a new Message command for breaking cited text.
@item
- @samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
+@samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
@item
- The @code{custom-face-lookup} function has been removed.
+The @code{custom-face-lookup} function has been removed.
If you used this function in your initialization files, you must
rewrite them to use @code{face-spec-set} instead.
@item
- Canceling now uses the current select method. Symbolic prefix
+Canceling now uses the current select method. Symbolic prefix
@kbd{a} forces normal posting method.
@item
- New command to translate M******** sm*rtq**t*s into proper
+New command to translate M******** sm*rtq**t*s into proper
text---@kbd{W d}.
@item
- For easier debugging of @code{nntp}, you can set
+For easier debugging of @code{nntp}, you can set
@code{nntp-record-commands} to a non-@code{nil} value.
@item
- @code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
-controlling where and how to send @sc{authinfo} to @sc{nntp} servers.
+@code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
+controlling where and how to send @sc{authinfo} to @acronym{NNTP} servers.
@item
- A command for editing group parameters from the summary buffer
+A command for editing group parameters from the summary buffer
has been added.
@item
- A history of where mails have been split is available.
+A history of where mails have been split is available.
@item
- A new article date command has been added---@code{article-date-iso8601}.
+A new article date command has been added---@code{article-date-iso8601}.
@item
- Subjects can be simplified when threading by setting
+Subjects can be simplified when threading by setting
@code{gnus-score-thread-simplify}.
@item
- A new function for citing in Message has been
+A new function for citing in Message has been
added---@code{message-cite-original-without-signature}.
@item
- @code{article-strip-all-blank-lines}---new article command.
+@code{article-strip-all-blank-lines}---new article command.
@item
- A new Message command to kill to the end of the article has
+A new Message command to kill to the end of the article has
been added.
@item
- A minimum adaptive score can be specified by using the
+A minimum adaptive score can be specified by using the
@code{gnus-adaptive-word-minimum} variable.
@item
- The ``lapsed date'' article header can be kept continually
+The ``lapsed date'' article header can be kept continually
updated by the @code{gnus-start-date-timer} command.
@item
- Web listserv archives can be read with the @code{nnlistserv} back end.
+Web listserv archives can be read with the @code{nnlistserv} back end.
@item
- Old dejanews archives can now be read by @code{nnweb}.
+Old dejanews archives can now be read by @code{nnweb}.
@end itemize
:suffix ".in")))
@end lisp
-More information is available in the info doc at Select Methods ->
-Getting Mail -> Mail Sources
+@xref{Mail Source Specifiers}.
@item
-Gnus is now a @sc{mime}-capable reader. This affects many parts of
+Gnus is now a @acronym{MIME}-capable reader. This affects many parts of
Gnus, and adds a slew of new commands. See the manual for details.
@item
@item
The user can now decide which extra headers should be included in
-summary buffers and @sc{nov} files.
+summary buffers and @acronym{NOV} files.
@item
@code{gnus-article-display-hook} has been removed. Instead, a number
again, to keep up with ever-changing layouts.
@item
-Gnus can now read @sc{imap} mail via @code{nnimap}.
+Gnus can now read @acronym{IMAP} mail via @code{nnimap}.
+
+@end itemize
+
+@node Oort Gnus
+@subsubsection Oort Gnus
+@cindex Oort Gnus
+
+New features in Gnus 5.10:
+
+@itemize @bullet
+
+@item
+@code{gnus-group-read-ephemeral-group} can be called interactively,
+using @kbd{G M}.
+
+@item
+In draft groups, @kbd{e} is now bound to @code{gnus-draft-edit-message}.
+Use @kbd{B w} for @code{gnus-summary-edit-article} instead.
+
+@item
+The revised Gnus @acronym{FAQ} is included in the manual,
+@xref{Frequently Asked Questions}.
+
+@item
+Upgrading from previous (stable) version if you have used Oort.
+
+If you have tried Oort (the unstable Gnus branch leading to this
+release) but went back to a stable version, be careful when upgrading to
+this version. In particular, you will probably want to remove all
+@file{.marks} (nnml) and @file{.mrk} (nnfolder) files, so that flags are
+read from your @file{.newsrc.eld} instead of from the
+@file{.marks}/@file{.mrk} file where this release store flags. See a
+later entry for more information about marks. Note that downgrading
+isn't save in general.
+
+@item
+Article Buttons
+
+More buttons for URLs, mail addresses, Message-IDs, Info links, man
+pages and Emacs or Gnus related references. @xref{Article Buttons}. The
+variables @code{gnus-button-@var{*}-level} can be used to control the
+appearance of all article buttons. @xref{Article Button Levels}.
+
+@item
+Dired integration
+
+@code{gnus-dired-minor-mode} (see @ref{Other modes}) installs key
+bindings in dired buffers to send a file as an attachment, open a file
+using the appropriate mailcap entry, and print a file using the mailcap
+entry.
+
+@item
+Gnus can display RSS newsfeeds as a newsgroup. @xref{RSS}.
+
+@item
+Single-part yenc encoded attachments can be decoded.
+
+@item
+Picons
+
+The picons code has been reimplemented to work in GNU Emacs---some of
+the previous options have been removed or renamed.
+
+Picons are small ``personal icons'' representing users, domain and
+newsgroups, which can be displayed in the Article buffer.
+@xref{Picons}.
+
+@item
+If the new option @code{gnus-treat-body-boundary} is non-@code{nil}, a
+boundary line is drawn at the end of the headers.
+
+@item
+Retrieval of charters and control messages
+
+There are new commands for fetching newsgroup charters (@kbd{H c}) and
+control messages (@kbd{H C}).
+
+@item
+Delayed articles
+
+You can delay the sending of a message with @kbd{C-c C-j} in the Message
+buffer. The messages are delivered at specified time. This is useful
+for sending yourself reminders. @xref{Delayed Articles}.
+
+@item
+If @code{auto-compression-mode} is enabled, attachments are automatically
+decompressed when activated.
+
+@item
+If the new option @code{nnml-use-compressed-files} is non-@code{nil},
+the nnml back end allows compressed message files.
+
+@item
+Signed article headers (X-PGP-Sig) can be verified with @kbd{W p}.
+
+@item
+The Summary Buffer uses an arrow in the fringe to indicate the current
+article. Use @code{(setq gnus-summary-display-arrow nil)} to disable it.
+
+@item
+Warn about email replies to news
+
+Do you often find yourself replying to news by email by mistake? Then
+the new option @code{gnus-confirm-mail-reply-to-news} is just the thing for
+you.
+
+@item
+If the new option @code{gnus-summary-display-while-building} is
+non-@code{nil}, the summary buffer is shown and updated as it's being
+built.
+
+@item
+The new @code{recent} mark @samp{.} indicates newly arrived messages (as
+opposed to old but unread messages).
+
+@item
+The new option @code{gnus-gcc-mark-as-read} automatically marks
+Gcc articles as read.
+
+@item
+The nndoc back end now supports mailman digests and exim bounces.
+
+@item
+Gnus supports RFC 2369 mailing list headers, and adds a number of
+related commands in mailing list groups. @xref{Mailing List}.
+
+@item
+The Date header can be displayed in a format that can be read aloud
+in English. @xref{Article Date}.
+
+@item
+The envelope sender address can be customized when using Sendmail.
+@xref{Mail Variables, Mail Variables,, message, Message Manual}.
+
+@item
+diffs are automatically highlighted in groups matching
+@code{mm-uu-diff-groups-regexp}
+
+@item
+@acronym{TLS} wrapper shipped with Gnus
+
+@acronym{TLS}/@acronym{SSL} is now supported in @acronym{IMAP} and
+@acronym{NNTP} via @file{tls.el} and GNUTLS. The old
+@acronym{TLS}/@acronym{SSL} support via (external third party)
+@file{ssl.el} and OpenSSL still works.
+
+@item
+New @file{make.bat} for compiling and installing Gnus under MS Windows
+
+Use @file{make.bat} if you want to install Gnus under MS Windows, the
+first argument to the batch-program should be the directory where
+@file{xemacs.exe} respectively @file{emacs.exe} is located, iff you want
+to install Gnus after compiling it, give @file{make.bat} @code{/copy} as
+the second parameter.
+
+@file{make.bat} has been rewritten from scratch, it now features
+automatic recognition of XEmacs and GNU Emacs, generates
+@file{gnus-load.el}, checks if errors occur while compilation and
+generation of info files and reports them at the end of the build
+process. It now uses @code{makeinfo} if it is available and falls
+back to @file{infohack.el} otherwise. @file{make.bat} should now
+install all files which are necessary to run Gnus and be generally a
+complete replacement for the @code{configure; make; make install}
+cycle used under Unix systems.
+
+The new @file{make.bat} makes @file{make-x.bat} superfluous, so it has
+been removed.
+
+@item
+Support for non-@acronym{ASCII} domain names
+
+Message supports non-@acronym{ASCII} domain names in From:, To: and
+Cc: and will query you whether to perform encoding when you try to
+send a message. The variable @code{message-use-idna} controls this.
+Gnus will also decode non-@acronym{ASCII} domain names in From:, To:
+and Cc: when you view a message. The variable @code{gnus-use-idna}
+controls this.
+
+@item
+Better handling of Microsoft citation styles
+
+Gnus now tries to recognize the mangled header block that some Microsoft
+mailers use to indicate that the rest of the message is a citation, even
+though it is not quoted in any way. The variable
+@code{gnus-cite-unsightly-citation-regexp} matches the start of these
+citations.
+
+@item
+@code{gnus-article-skip-boring}
+
+If you set @code{gnus-article-skip-boring} to @code{t}, then Gnus will
+not scroll down to show you a page that contains only boring text,
+which by default means cited text and signature. You can customize
+what is skippable using @code{gnus-article-boring-faces}.
+
+This feature is especially useful if you read many articles that
+consist of a little new content at the top with a long, untrimmed
+message cited below.
+
+@item
+The format spec @code{%C} for positioning point has changed to @code{%*}.
+
+@item
+The new variable @code{gnus-parameters} can be used to set group parameters.
+
+Earlier this was done only via @kbd{G p} (or @kbd{G c}), which stored
+the parameters in @file{~/.newsrc.eld}, but via this variable you can
+enjoy the powers of customize, and simplified backups since you set the
+variable in @file{~/.emacs} instead of @file{~/.newsrc.eld}. The
+variable maps regular expressions matching group names to group
+parameters, a'la:
+@lisp
+(setq gnus-parameters
+ '(("mail\\..*"
+ (gnus-show-threads nil)
+ (gnus-use-scoring nil))
+ ("^nnimap:\\(foo.bar\\)$"
+ (to-group . "\\1"))))
+@end lisp
+
+@item
+Smileys (@samp{:-)}, @samp{;-)} etc) are now iconized for Emacs too.
+
+Put @code{(setq gnus-treat-display-smileys nil)} in @file{~/.emacs} to
+disable it.
+
+@item
+Gnus no longer generate the Sender: header automatically.
+
+Earlier it was generated iff the user configurable email address was
+different from the Gnus guessed default user address. As the guessing
+algorithm is rarely correct these days, and (more controversially) the
+only use of the Sender: header was to check if you are entitled to
+cancel/supersede news (which is now solved by Cancel Locks instead,
+see another entry), generation of the header has been disabled by
+default. See the variables @code{message-required-headers},
+@code{message-required-news-headers}, and
+@code{message-required-mail-headers}.
+
+@item
+Features from third party @file{message-utils.el} added to @file{message.el}.
+
+Message now asks if you wish to remove @samp{(was: <old subject>)} from
+subject lines (see @code{message-subject-trailing-was-query}). @kbd{C-c
+M-m} and @kbd{C-c M-f} inserts markers indicating included text.
+@kbd{C-c C-f a} adds a X-No-Archive: header. @kbd{C-c C-f x} inserts
+appropriate headers and a note in the body for cross-postings and
+followups (see the variables @code{message-cross-post-@var{*}}).
+
+@item
+References and X-Draft-Headers are no longer generated when you start
+composing messages and @code{message-generate-headers-first} is
+@code{nil}.
+
+@item
+Improved anti-spam features.
+
+Gnus is now able to take out spam from your mail and news streams
+using a wide variety of programs and filter rules. Among the supported
+methods are RBL blocklists, bogofilter and white/blacklists. Hooks
+for easy use of external packages such as SpamAssassin and Hashcash
+are also new. @xref{Thwarting Email Spam}.
+
+@item
+Easy inclusion of X-Faces headers.
+
+@item
+Face headers handling.
+
+@item
+In the summary buffer, the new command @kbd{/ N} inserts new messages
+and @kbd{/ o} inserts old messages.
+
+@item
+Gnus decodes morse encoded messages if you press @kbd{W m}.
+
+@item
+Unread count correct in nnimap groups.
+
+The estimated number of unread articles in the group buffer should now
+be correct for nnimap groups. This is achieved by calling
+@code{nnimap-fixup-unread-after-getting-new-news} from the
+@code{gnus-setup-news-hook} (called on startup) and
+@code{gnus-after-getting-new-news-hook}. (called after getting new
+mail). If you have modified those variables from the default, you may
+want to add @code{nnimap-fixup-unread-after-getting-new-news} again. If
+you were happy with the estimate and want to save some (minimal) time
+when getting new mail, remove the function.
+
+@item
+Group Carbon Copy (GCC) quoting
+
+To support groups that contains SPC and other weird characters, groups
+are quoted before they are placed in the Gcc: header. This means
+variables such as @code{gnus-message-archive-group} should no longer
+contain quote characters to make groups containing SPC work. Also, if
+you are using the string @samp{nnml:foo, nnml:bar} (indicating Gcc
+into two groups) you must change it to return the list
+@code{("nnml:foo" "nnml:bar")}, otherwise the Gcc: line will be quoted
+incorrectly. Note that returning the string @samp{nnml:foo, nnml:bar}
+was incorrect earlier, it just didn't generate any problems since it
+was inserted directly.
+
+@item
+@file{~/News/overview/} not used.
+
+As a result of the following change, the @file{~/News/overview/}
+directory is not used any more. You can safely delete the entire
+hierarchy.
+
+@item
+@code{gnus-agent}
+
+The Gnus Agent has seen a major updated and is now enabled by default,
+and all nntp and nnimap servers from @code{gnus-select-method} and
+@code{gnus-secondary-select-method} are agentized by default. Earlier
+only the server in @code{gnus-select-method} was agentized by the
+default, and the agent was disabled by default. When the agent is
+enabled, headers are now also retrieved from the Agent cache instead
+of the back ends when possible. Earlier this only happened in the
+unplugged state. You can enroll or remove servers with @kbd{J a} and
+@kbd{J r} in the server buffer. Gnus will not download articles into
+the Agent cache, unless you instruct it to do so, though, by using
+@kbd{J u} or @kbd{J s} from the Group buffer. You revert to the old
+behaviour of having the Agent disabled with @code{(setq gnus-agent
+nil)}. Note that putting @code{(gnus-agentize)} in @file{~/.gnus.el}
+is not needed any more.
+
+@item
+@code{gnus-summary-line-format}
+
+The default value changed to @samp{%U%R%z%I%(%[%4L: %-23,23f%]%)
+%s\n}. Moreover @code{gnus-extra-headers},
+@code{nnmail-extra-headers} and @code{gnus-ignored-from-addresses}
+changed their default so that the users name will be replaced by the
+recipient's name or the group name posting to for @acronym{NNTP}
+groups.
+
+@item
+@file{deuglify.el} (@code{gnus-article-outlook-deuglify-article})
+
+A new file from Raymond Scholz @email{rscholz@@zonix.de} for deuglifying
+broken Outlook (Express) articles.
+
+@item
+@code{(require 'gnus-load)}
+
+If you use a stand-alone Gnus distribution, you'd better add
+@code{(require 'gnus-load)} into your @file{~/.emacs} after adding the Gnus
+lisp directory into load-path.
+
+File @file{gnus-load.el} contains autoload commands, functions and variables,
+some of which may not be included in distributions of Emacsen.
+
+@item
+@code{gnus-slave-unplugged}
+
+A new command which starts Gnus offline in slave mode.
+
+@item
+@code{message-insinuate-rmail}
+
+Adding @code{(message-insinuate-rmail)} and @code{(setq
+mail-user-agent 'gnus-user-agent)} in @file{.emacs} convinces Rmail to
+compose, reply and forward messages in message-mode, where you can
+enjoy the power of @acronym{MML}.
+
+@item
+@code{message-minibuffer-local-map}
+
+The line below enables BBDB in resending a message:
+@lisp
+(define-key message-minibuffer-local-map [(tab)]
+ 'bbdb-complete-name)
+@end lisp
+
+@item
+Externalizing and deleting of attachments.
+
+If @code{gnus-gcc-externalize-attachments} or
+@code{message-fcc-externalize-attachments} is non-@code{nil}, attach
+local files as external parts.
+
+The command @code{gnus-mime-save-part-and-strip} (bound to @kbd{C-o}
+on @acronym{MIME} buttons) saves a part and replaces the part with an
+external one. @code{gnus-mime-delete-part} (bound to @kbd{d} on
+@acronym{MIME} buttons) removes a part. It works only on back ends
+that support editing.
+
+@item
+@code{gnus-default-charset}
+
+The default value is determined from the
+@code{current-language-environment} variable, instead of
+@code{iso-8859-1}. Also the @samp{.*} item in
+@code{gnus-group-charset-alist} is removed.
+
+@item
+@code{gnus-posting-styles}
+
+Add a new format of match like
+@lisp
+((header "to" "larsi.*org")
+ (Organization "Somewhere, Inc."))
+@end lisp
+The old format like the lines below is obsolete, but still accepted.
+@lisp
+(header "to" "larsi.*org"
+ (Organization "Somewhere, Inc."))
+@end lisp
+
+@item
+@code{message-ignored-news-headers} and @code{message-ignored-mail-headers}
+
+@samp{X-Draft-From} and @samp{X-Gnus-Agent-Meta-Information} have been
+added into these two variables. If you customized those, perhaps you
+need add those two headers too.
+
+@item
+Gnus reads the @acronym{NOV} and articles in the Agent if plugged.
+If one reads an article while plugged, and the article already exists
+in the Agent, it won't get downloaded once more. @code{(setq
+gnus-agent-cache nil)} reverts to the old behavior.
+
+@item
+Gnus supports the ``format=flowed'' (RFC 2646) parameter. On
+composing messages, it is enabled by @code{use-hard-newlines}.
+Decoding format=flowed was present but not documented in earlier
+versions.
+
+@item
+Gnus supports the generation of RFC 2298 Disposition Notification requests.
+
+This is invoked with the @kbd{C-c M-n} key binding from message mode.
+
+@item
+Gnus supports Maildir groups.
+
+Gnus includes a new back end @file{nnmaildir.el}. @xref{Maildir}.
+
+@item
+Printing capabilities are enhanced.
+
+Gnus supports Muttprint natively with @kbd{O P} from the Summary and
+Article buffers. Also, each individual @acronym{MIME} part can be
+printed using @kbd{p} on the @acronym{MIME} button.
+
+@item
+Message supports the Importance: (RFC 2156) header.
+
+In the message buffer, @kbd{C-c C-f C-i} or @kbd{C-c C-u} cycles through
+the valid values.
+
+@item
+Gnus supports Cancel Locks in News.
+
+This means a header @samp{Cancel-Lock} is inserted in news posting. It is
+used to determine if you wrote an article or not (for canceling and
+superseding). Gnus generates a random password string the first time
+you post a message, and saves it in your @file{~/.emacs} using the Custom
+system. While the variable is called @code{canlock-password}, it is not
+security sensitive data. Publishing your canlock string on the web
+will not allow anyone to be able to anything she could not already do.
+The behaviour can be changed by customizing @code{message-insert-canlock}.
+
+@item
+Gnus supports server-side mail filtering using Sieve.
+
+Sieve rules can be added as Group Parameters for groups, and the
+complete Sieve script is generated using @kbd{D g} from the Group
+buffer, and then uploaded to the server using @kbd{C-c C-l} in the
+generated Sieve buffer. @xref{Sieve Commands}, and the new Sieve
+manual @ref{Top, , Top, sieve, Emacs Sieve}.
+
+@item
+Extended format specs.
+
+Format spec @samp{%&user-date;} is added into
+@code{gnus-summary-line-format-alist}. Also, user defined extended
+format specs are supported. The extended format specs look like
+@samp{%u&foo;}, which invokes function
+@code{gnus-user-format-function-@var{foo}}. Because @samp{&} is used as the
+escape character, old user defined format @samp{%u&} is no longer supported.
+
+@item
+@kbd{/ *} (@code{gnus-summary-limit-include-cached}) is rewritten.
+
+It was aliased to @kbd{Y c}
+(@code{gnus-summary-insert-cached-articles}). The new function filters
+out other articles.
+
+@item Some limiting commands accept a @kbd{C-u} prefix to negate the match.
+
+If @kbd{C-u} is used on subject, author or extra headers, i.e., @kbd{/
+s}, @kbd{/ a}, and @kbd{/ x}
+(@code{gnus-summary-limit-to-@{subject,author,extra@}}) respectively, the
+result will be to display all articles that do not match the expression.
+
+@item
+Group names are treated as UTF-8 by default.
+
+This is supposedly what USEFOR wanted to migrate to. See
+@code{gnus-group-name-charset-group-alist} and
+@code{gnus-group-name-charset-method-alist} for customization.
+
+@item
+The nnml and nnfolder back ends store marks for each groups.
+
+This makes it possible to take backup of nnml/nnfolder servers/groups
+separately of @file{~/.newsrc.eld}, while preserving marks. It also
+makes it possible to share articles and marks between users (without
+sharing the @file{~/.newsrc.eld} file) within e.g. a department. It
+works by storing the marks stored in @file{~/.newsrc.eld} in a per-group
+file @file{.marks} (for nnml) and @file{@var{groupname}.mrk} (for
+nnfolder, named @var{groupname}). If the nnml/nnfolder is moved to
+another machine, Gnus will automatically use the @file{.marks} or
+@file{.mrk} file instead of the information in @file{~/.newsrc.eld}.
+The new server variables @code{nnml-marks-is-evil} and
+@code{nnfolder-marks-is-evil} can be used to disable this feature.
+
+@item
+The menu bar item (in Group and Summary buffer) named ``Misc'' has
+been renamed to ``Gnus''.
+
+@item
+The menu bar item (in Message mode) named ``@acronym{MML}'' has been
+renamed to ``Attachments''. Note that this menu also contains security
+related stuff, like signing and encryption (@pxref{Security, Security,,
+message, Message Manual}).
+
+@item
+@code{gnus-group-charset-alist} and
+@code{gnus-group-ignored-charsets-alist}.
+
+The regexps in these variables are compared with full group names
+instead of real group names in 5.8. Users who customize these
+variables should change those regexps accordingly. For example:
+@lisp
+("^han\\>" euc-kr) -> ("\\(^\\|:\\)han\\>" euc-kr)
+@end lisp
+
+@item
+Gnus supports @acronym{PGP} (RFC 1991/2440), @acronym{PGP/MIME} (RFC
+2015/3156) and @acronym{S/MIME} (RFC 2630-2633).
+
+It needs an external @acronym{S/MIME} and OpenPGP implementation, but no
+additional Lisp libraries. This add several menu items to the
+Attachments menu, and @kbd{C-c RET} key bindings, when composing
+messages. This also obsoletes @code{gnus-article-hide-pgp-hook}.
+
+@item
+Gnus inlines external parts (message/external).
+
+@item
+@acronym{MML} (Mime compose) prefix changed from @kbd{M-m} to @kbd{C-c
+C-m}.
+
+This change was made to avoid conflict with the standard binding of
+@code{back-to-indentation}, which is also useful in message mode.
+
+@item
+The default for @code{message-forward-show-mml} changed to symbol @code{best}.
+
+The behaviour for the @code{best} value is to show @acronym{MML} (i.e.,
+convert to @acronym{MIME}) when appropriate. @acronym{MML} will not be
+used when forwarding signed or encrypted messages, as the conversion
+invalidate the digital signature.
@end itemize
+@node No Gnus
+@subsubsection No Gnus
+@cindex No Gnus
+
+New features in No Gnus:
+@c FIXME: Gnus 5.12?
+
+@include gnus-news.texi
+
@iftex
@page
@item news
@cindex news
This is what you are supposed to use this thing for---reading news.
-News is generally fetched from a nearby @sc{nntp} server, and is
+News is generally fetched from a nearby @acronym{NNTP} server, and is
generally publicly available to everybody. If you post news, the entire
world is likely to read just what you have written, and they'll all
snigger mischievously. Behind your back.
@cindex back end
Gnus considers mail and news to be mostly the same, really. The only
difference is how to access the actual articles. News articles are
-commonly fetched via the protocol NNTP, whereas mail messages could be
-read from a file on the local disk. The internal architecture of Gnus
-thus comprises a `front end' and a number of `back ends'. Internally,
-when you enter a group (by hitting @key{RET}, say), you thereby invoke
-a function in the front end in Gnus. The front end then `talks' to a
-back end and says things like ``Give me the list of articles in the foo
-group'' or ``Show me article number 4711''.
-
-So a back end mainly defines either a protocol (the @code{nntp} back end
-accesses news via NNTP, the @code{nnimap} back end accesses mail via
-IMAP) or a file format and directory layout (the @code{nnspool} back end
-accesses news via the common `spool directory' format, the @code{nnml}
-back end access mail via a file format and directory layout that's
-quite similar).
+commonly fetched via the protocol @acronym{NNTP}, whereas mail
+messages could be read from a file on the local disk. The internal
+architecture of Gnus thus comprises a ``front end'' and a number of
+``back ends''. Internally, when you enter a group (by hitting
+@key{RET}, say), you thereby invoke a function in the front end in
+Gnus. The front end then ``talks'' to a back end and says things like
+``Give me the list of articles in the foo group'' or ``Show me article
+number 4711''.
+
+So a back end mainly defines either a protocol (the @code{nntp} back
+end accesses news via @acronym{NNTP}, the @code{nnimap} back end
+accesses mail via @acronym{IMAP}) or a file format and directory
+layout (the @code{nnspool} back end accesses news via the common
+``spool directory'' format, the @code{nnml} back end access mail via a
+file format and directory layout that's quite similar).
Gnus does not handle the underlying media, so to speak---this is all
done by the back ends. A back end is a collection of functions to
access the articles.
-However, sometimes the term `back end' is also used where `server'
-would have been more appropriate. And then there is the term `select
-method' which can mean either. The Gnus terminology can be quite
+However, sometimes the term ``back end'' is also used where ``server''
+would have been more appropriate. And then there is the term ``select
+method'' which can mean either. The Gnus terminology can be quite
confusing.
@item native
@item headers
@cindex headers
A collection of such lines, or a collection of heads. Or even a
-collection of @sc{nov} lines.
+collection of @acronym{NOV} lines.
-@item @sc{nov}
-@cindex nov
+@item @acronym{NOV}
+@cindex @acronym{NOV}
When Gnus enters a group, it asks the back end for the headers of all
unread articles in the group. Most servers support the News OverView
format, which is more compact and much faster to read and parse than the
@item ephemeral groups
@cindex ephemeral groups
+@cindex temporary groups
Most groups store data on what articles you have read. @dfn{Ephemeral}
groups are groups that will have no data stored---when you exit the
group, it'll disappear into the aether.
A collection of messages in one file. The most common digest format is
specified by RFC 1153.
+@item splitting
+@cindex splitting, terminolgy
+@cindex mail sorting
+@cindex mail filtering (splitting)
+The action of sorting your emails according to certain rules. Sometimes
+incorrectly called mail filtering.
+
@end table
If you run Emacs on a machine locally, and get your news from a machine
over some very thin strings, you want to cut down on the amount of data
-Gnus has to get from the @sc{nntp} server.
+Gnus has to get from the @acronym{NNTP} server.
@table @code
@item gnus-nov-is-evil
This one has to be @code{nil}. If not, grabbing article headers from
-the @sc{nntp} server will not be very fast. Not all @sc{nntp} servers
+the @acronym{NNTP} server will not be very fast. Not all @acronym{NNTP} servers
support @sc{xover}; Gnus will detect this by itself.
@end table
@code{gnus-nov-is-evil} to @code{nil} to make entering and exiting the
summary buffer faster.
+Gnus uses the internal ELisp-based @code{uncompface} program for
+decoding an @code{X-Face} header normally in Emacs. If you feel it is
+slow, set @code{uncompface-use-external} to @code{t}. @xref{X-Face}.
+
@page
@node Troubleshooting
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
-like @samp{Gnus v5.46; nntp 4.0} you have the right files loaded. If,
-on the other hand, you get something like @samp{NNTP 3.x} or @samp{nntp
-flee}, you have some old @file{.el} files lying around. Delete these.
+like @samp{Gnus v5.10.6} you have the right files loaded. Otherwise
+you have some old @file{.el} files lying around. Delete these.
@item
-Read the help group (@kbd{G h} in the group buffer) for a FAQ and a
-how-to.
+Read the help group (@kbd{G h} in the group buffer) for a
+@acronym{FAQ} and a how-to.
@item
@vindex max-lisp-eval-depth
@cindex edebug
If you want to debug your problem further before reporting, possibly
in order to solve the problem yourself and send a patch, you can use
-edebug. Debugging lisp code is documented in the Elisp manual
+edebug. Debugging Lisp code is documented in the Elisp manual
(@pxref{Debugging, , Debugging Lisp Programs, elisp, The GNU Emacs
Lisp Reference Manual}). To get you started with edebug, consider if
you discover some weird behaviour when pressing @kbd{c}, the first
@cindex elp
@cindex profile
@cindex slow
-Sometimes, a problem do not directly generate a elisp error but
+Sometimes, a problem do not directly generate an elisp error but
manifests itself by causing Gnus to be very slow. In these cases, you
can use @kbd{M-x toggle-debug-on-quit} and press @kbd{C-g} when things are
slow, and then try to analyze the backtrace (repeating the procedure
-helps isolating the real problem areas). A fancier approach is to use
-the elisp profiler, ELP. The profiler is (or should be) fully
-documented elsewhere, but to get you started there are a few steps
-that need to be followed. First, instrument the part of Gnus you are
-interested in for profiling, e.g. @kbd{M-x elp-instrument-package RET
-gnus} or @kbd{M-x elp-instrument-package RET message}. Then perform
-the operation that is slow and press @kbd{M-x elp-results}. You will
-then see which operations that takes time, and can debug them further.
-If the entire operation takes much longer than the time spent in the
-slowest function in the profiler output, you probably profiled the
-wrong part of Gnus. To reset profiling statistics, use @kbd{M-x
-elp-reset-all}. @kbd{M-x elp-restore-all} is supposed to remove
-profiling, but given the complexities and dynamic code generation in
-Gnus, it might not always work perfectly.
-
-If you just need help, you are better off asking on
-@samp{gnu.emacs.gnus}. I'm not very helpful.
+helps isolating the real problem areas).
+
+A fancier approach is to use the elisp profiler, ELP. The profiler is
+(or should be) fully documented elsewhere, but to get you started
+there are a few steps that need to be followed. First, instrument the
+part of Gnus you are interested in for profiling, e.g. @kbd{M-x
+elp-instrument-package RET gnus} or @kbd{M-x elp-instrument-package
+RET message}. Then perform the operation that is slow and press
+@kbd{M-x elp-results}. You will then see which operations that takes
+time, and can debug them further. If the entire operation takes much
+longer than the time spent in the slowest function in the profiler
+output, you probably profiled the wrong part of Gnus. To reset
+profiling statistics, use @kbd{M-x elp-reset-all}. @kbd{M-x
+elp-restore-all} is supposed to remove profiling, but given the
+complexities and dynamic code generation in Gnus, it might not always
+work perfectly.
@cindex gnu.emacs.gnus
@cindex ding mailing list
-You can also ask on the ding mailing list---@email{ding@@gnus.org}.
-Write to @email{ding-request@@gnus.org} to subscribe.
+If you just need help, you are better off asking on
+@samp{gnu.emacs.gnus}. I'm not very helpful. You can also ask on
+@email{ding@@gnus.org, the ding mailing list}. Write to
+@email{ding-request@@gnus.org} to subscribe.
@page
@findex gnus-group-foreign-p
Says whether @var{group} is foreign or not.
-@item group-group-find-parameter
-@findex group-group-find-parameter
+@item gnus-group-find-parameter
+@findex gnus-group-find-parameter
Returns the parameter list of @var{group}. If given a second parameter,
returns the value of that parameter for @var{group}.
@node Back End Interface
@subsection Back End Interface
-Gnus doesn't know anything about @sc{nntp}, spools, mail or virtual
+Gnus doesn't know anything about @acronym{NNTP}, spools, mail or virtual
groups. It only knows how to talk to @dfn{virtual servers}. A virtual
server is a @dfn{back end} and some @dfn{back end variables}. As examples
of the first, we have @code{nntp}, @code{nnspool} and @code{nnmbox}. As
Some back ends could be said to be @dfn{server-forming} back ends, and
some might be said not to be. The latter are back ends that generally
only operate on one group at a time, and have no concept of ``server''
--- they have a group, and they deliver info on that group and nothing
+---they have a group, and they deliver info on that group and nothing
more.
Gnus identifies each message by way of group name and article number. A
few remarks about these article numbers might be useful. First of all,
the numbers are positive integers. Secondly, it is normally not
-possible for later articles to `re-use' older article numbers without
+possible for later articles to ``re-use'' older article numbers without
confusing Gnus. That is, if a group has ever contained a message
numbered 42, then no other message may get that number, or Gnus will get
mightily confused.@footnote{See the function
Third, article numbers must be assigned in order of arrival in the
group; this is not necessarily the same as the date of the message.
-The previous paragraph already mentions all the `hard' restrictions that
+The previous paragraph already mentions all the ``hard'' restrictions that
article numbers must fulfill. But it seems that it might be useful to
assign @emph{consecutive} article numbers, for Gnus gets quite confused
if there are holes in the article numbering sequence. However, due to
-the `no-reuse' restriction, holes cannot be avoided altogether. It's
+the ``no-reuse'' restriction, holes cannot be avoided altogether. It's
also useful for the article numbers to start at 1 to avoid running out
of numbers as long as possible.
-Note that by convention, backends are named @code{nnsomething}, but
+Note that by convention, back ends are named @code{nnsomething}, but
Gnus also comes with some @code{nnnotbackends}, such as
@file{nnheader.el}, @file{nnmail.el} and @file{nnoo.el}.
sequences (lists) of article numbers, and most back ends do not support
retrieval of @code{Message-ID}s. But they should try for both.
-The result data should either be HEADs or @sc{nov} lines, and the result
+The result data should either be HEADs or @acronym{NOV} lines, and the result
value should either be @code{headers} or @code{nov} to reflect this.
This might later be expanded to @code{various}, which will be a mixture
-of HEADs and @sc{nov} lines, but this is currently not supported by Gnus.
+of HEADs and @acronym{NOV} lines, but this is currently not supported by Gnus.
If @var{fetch-old} is non-@code{nil} it says to try fetching ``extra
headers'', in some meaning of the word. This is generally done by
If @var{server} is the current virtual server, and the connection to the
physical server is alive, then this function should return a
-non-@code{nil} vlue. This function should under no circumstances
+non-@code{nil} value. This function should under no circumstances
attempt to reconnect to a server we have lost connection to.
There should be no data returned.
@item (nnchoke-request-update-info GROUP INFO &optional SERVER)
A Gnus group info (@pxref{Group Info}) is handed to the back end for
-alterations. This comes in handy if the back end really carries all the
-information (as is the case with virtual and imap groups). This
+alterations. This comes in handy if the back end really carries all
+the information (as is the case with virtual and imap groups). This
function should destructively alter the info to suit its needs, and
-should return a non-nil value.
+should return a non-@code{nil} value.
There should be no result data from this function.
Set/remove/add marks on articles. Normally Gnus handles the article
marks (such as read, ticked, expired etc) internally, and store them in
-@file{~/.newsrc.eld}. Some back ends (such as @sc{imap}) however carry
+@file{~/.newsrc.eld}. Some back ends (such as @acronym{IMAP}) however carry
all information about the articles on the server, so Gnus need to
propagate the mark information to the server.
This function may be called at any time (by Gnus or anything else) to
request that the back end check for incoming articles, in one way or
-another. A mail back end will typically read the spool file or query the
-POP server when this function is invoked. The @var{group} doesn't have
-to be heeded---if the back end decides that it is too much work just
-scanning for a single group, it may do a total scan of all groups. It
-would be nice, however, to keep things local if that's practical.
+another. A mail back end will typically read the spool file or query
+the @acronym{POP} server when this function is invoked. The
+@var{group} doesn't have to be heeded---if the back end decides that
+it is too much work just scanning for a single group, it may do a
+total scan of all groups. It would be nice, however, to keep things
+local if that's practical.
There should be no result data from this function.
the function @code{message-make-date} by default). The data should be
in the active buffer format.
-It is okay for this function to return `too many' groups; some back ends
+It is okay for this function to return ``too many'' groups; some back ends
might find it cheaper to return the full list of groups, rather than
just the new groups. But don't do this for back ends with many groups.
Normally, if the user creates the groups herself, there won't be too
The function should return a cons where the @code{car} is the group name and
the @code{cdr} is the article number that the article was entered as.
-The group should exist before the backend is asked to accept the
+The group should exist before the back end is asked to accept the
article for that group.
There should be no data returned.
Below is a slightly shortened version of the @code{nndir} back end.
@lisp
-;;; nndir.el --- single directory newsgroup access for Gnus
-;; Copyright (C) 1995,96 Free Software Foundation, Inc.
+;;; @r{nndir.el --- single directory newsgroup access for Gnus}
+;; @r{Copyright (C) 1995,96 Free Software Foundation, Inc.}
-;;; Code:
+;;; @r{Code:}
(require 'nnheader)
(require 'nnmh)
(defvoo nndir-status-string "" nil nnmh-status-string)
(defconst nndir-version "nndir 1.0")
-;;; Interface functions.
+;;; @r{Interface functions.}
(nnoo-define-basics nndir)
@subsection Score File Syntax
Score files are meant to be easily parseable, but yet extremely
-mallable. It was decided that something that had the same read syntax
+mallable. It was decided that something that had the same read syntax
as an Emacs Lisp list would fit that spec.
Here's a typical score file:
@subsection Headers
Internally Gnus uses a format for storing article headers that
-corresponds to the @sc{nov} format in a mysterious fashion. One could
-almost suspect that the author looked at the @sc{nov} specification and
+corresponds to the @acronym{NOV} format in a mysterious fashion. One could
+almost suspect that the author looked at the @acronym{NOV} specification and
just shamelessly @emph{stole} the entire thing, and one would be right.
@dfn{Header} is a severely overloaded term. ``Header'' is used in
@c mode: texinfo
@c coding: iso-8859-1
@c End:
-% LocalWords: BNF mucho detailmenu cindex kindex kbd
-% LocalWords: findex Gnusae vindex dfn dfn samp nntp setq nnspool nntpserver
-% LocalWords: nnmbox newusers Blllrph NEWGROUPS dingnusdingnusdingnus
-% LocalWords: pre fab rec comp nnslashdot regex ga ga sci nnml nnbabyl nnmh
-% LocalWords: nnfolder emph looong eld newsreaders defun init elc pxref
projects / gnus / blobdiff