% gnuslogo-booklet.eps).
%
% From this LaTeX file (gnus-refcard.tex) plus a single logo (gnus-logo.eps),
-% we can generate the refcard and the booklet version. Appropriate Makefile
-% rules were added. This simplifies to distribute the refcard with Emacs.
+% we can generate the refcard and the booklet version. This simplifies to
+% distribute the refcard with Emacs. Appropriate Makefile rules were added in
+% gnus/texi/Makefile.
+
+% For Emacs, we may use the following commands (w/o) using Gnus' Makefile:
+%
+% latex gnus-refcard.tex &&
+% dvips -t letter -f gnus-refcard.dvi > gnus-refcard.ps
%
-% (Reiner Steib, March 2005)
+% latex '\def\booklettrue{}\def\letterpapertrue{}\input{gnus-refcard}' &&
+% mv gnus-refcard.dvi gnus-booklet.dvi &&
+% dvips -t letter -f gnus-booklet.dvi > gnus-booklet.ps
\usepackage{ifthen}
\ifthenelse{\isundefined{\booklettrue}}{
\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Reference Card
-
+
\def\Guide{Card}\def\guide{card}
\def\logoscale{0.25}
-
+
% Page setup for the refcard:
-
+
% \setlength{\textwidth}{7.26in} \setlength{\textheight}{10in}
% \setlength{\topmargin}{-1.0in}
% % the same settings work for A4, although there is a bit of space at the
- % % top and bottom of the page.
+ % % top and bottom of the page.
% \setlength{\oddsidemargin}{-0.5in} \setlength{\evensidemargin}{-0.5in}
\ifthenelse{\isundefined{\letterpapertrue}}{
}{
\geometry{hmargin=20mm,tmargin=10mm,bmargin=12mm}
}
-
+
}{ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Reference Booklet
-
+
\def\Guide{Booklet}\def\guide{booklet}
\def\logoscale{0.5}% FIXME: too large for 2up printing? --rsteib
-
- % FIXME: Use geometry package. --rsteib
-% \ifthenelse{\isundefined{\letterpapertrue}}{
-% \textwidth 4.9in \textheight 7.35in \topmargin -1.0in
-% }{
-% \textwidth 4.5in \textheight 7.5in \topmargin -1.0in
-% }
-% \oddsidemargin -0.5in \evensidemargin -0.5in
+
\ifthenelse{\isundefined{\letterpapertrue}}{
\geometry{a5paper,hmargin=10mm,tmargin=10mm,bmargin=4mm}
}{
- % FIXME: Use geometry package. --rsteib
\geometry{a5paper,hmargin=20mm,tmargin=10mm,bmargin=4mm}
}
-
+
\def\sec{\section}
\def\subsec{\subsection}
\def\subsubsec{\subsubsection}
\par\vspace*{\fill}\pagebreak}
}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
+% \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
%% include file for the Gnus refcard and booklet
-\def\progver{5.10}\def\refver{5.10-2} % program and refcard versions
-\def\date{Mar, 2005}
+\def\progver{5.11} % program version
+% \def\refver{5.10-2} % refcard version (not used)
+\def\date{April, 2006}
\def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$}
%%
\newcommand*{\Logo}[1]{\centerline{%
\includegraphics[width=\logoscale\logowidth]{gnus-logo}}}
+%% Contributions by:
+%% 1995 Vladimir Alexiev <vladimir@cs.ualberta.ca>
+%% 2000 Felix Natter <fnatter@gmx.net>
+%% 2001, 2002, 2003, 2005 \author.
+%% Original Gnus manual 1994 Lars Magne Ingebrigtsen
+%% Some material from Emacs Help Bindings feature (C-h b).
+%% Gnus logo by Luis Fernandes.
\newcommand{\Copyright}{%
\begin{center}
- Copyright \copyright\ 1995 Free Software Foundation, Inc.\\*
- Copyright \copyright\ 1995 Vladimir Alexiev
- $<$vladimir@cs.ualberta.ca$>$.\\*
- Copyright \copyright\ 2000 Felix Natter $<$fnatter@gmx.net$>$.\\*
- Copyright \copyright\ 2001, 2002, 2003, 2004, 2005 \author.\\*
- Created from the Gnus manual Copyright \copyright\ 1994 Lars Magne
- Ingebrigtsen.\\*
- and the Emacs Help Bindings feature (C-h b).\\*
- Gnus logo copyright \copyright\ 1995 Luis Fernandes.\\*
+ Copyright \copyright\ 1995, 2000, 2002--2013 Free Software Foundation, Inc.\\*
\end{center}
Permission is granted to make and distribute copies of this reference
\quad [distance] How many objects to move the point over.
- \quad [scope] How many objects to operate on (including the current one).
+ \quad [scope] How many objects to operate on (including current one).
\quad [p/p] The ``Process/Prefix Convention'': If a prefix is given then it
determines how many objects to operate on. Else if there are some objects
M-x gnus-no-server & start Gnus without connecting to server
(i.e. to read mail). \\
\end{keys}
- Additionally, there are the two commands \texttt{gnus-plugged} and
+ Additionally, there are two commands \texttt{gnus-plugged} and
\texttt{gnus-unplugged}, which are only used if you want to download
news and/or read previously downloaded news offline (see C-c C-i g Gnus
Unplugged RET). Note: \texttt{gnus-no-server} ignores the stuff in
\texttt{gnus-agent-directory}, and thus does not allow you to use Gnus
- Unplugged.
+ Unplugged.\\
%
\begin{keys}{C-c C-i}
C-c C-i & Go to the Gnus online {\bf info}.\\
\hline
\multicolumn{2}{|p{\markdblcolwidth}|}{{\bf ``Read'' Marks.}
All these marks appear in the first column of the summary line, and so
- are mutually exclusive.}\\
+ are mutually exclusive.}\\
\hline
` ' & (M-u, M SPC, M c) Not read.\\
! & (!, M !, M t) Ticked (interesting).\\
K & (k, M k; C-k, M K) {\bf Killed}.\\
M & Article marked as read by duplicate suppression.\\
Q & Article is part of a sparse thread (see ``Threading''
- in the manual).\\
+ in manual).\\
R & {\bf Read} (viewed in actuality).\\
X & Killed by a kill file.\\
Y & Killed due to low score.\\
\multicolumn{2}{|p{\markdblcolwidth}|}
{{\bf Marks not affecting visibility}}\\
\hline
- \# & (\#, M \#, M P p) Processable (will be affected by the next operation).
+ \# & (\#, M \#, M P p) Processable (affected by next operation).
[2]\\
A & {\bf Answered} (followed-up or replied). [2]\\
F & Forwarded. [2]\\
a & Post an {\bf article} to a group
[Prefix: use group under point to find posting-style].\\
b & Find {\bf bogus} groups and delete them.\\
- c & Mark all unticked articles in this group as read ({\bf catch-up}).
- [p/p]\\
+ c & Mark all unticked articles in group as read ({\bf catch-up}).
+ [p/p]\\
g & Check the server for new articles ({\bf get}). [level]\\
M-g & Check the server for new articles in this group ({\bf get}). [p/p]\\
j & {\bf Jump} to a group.\\
[Prefix: use group under point to find posting-style].\\
n & Go to the {\bf next} group with unread articles. [distance]\\
M-n & Go to the {\bf next} group on the same or lower level.
- [distance]\\
+ [distance]\\
p & (DEL) Go to the {\bf previous} group with unread articles.
- [distance]\\
- M-p & Go to the {\bf previous} group on the same or lower level. [distance]\\
+ [distance]\\
+ M-p & Go to the {\bf previous} group on the same or lower level. [distance]\\
q & {\bf Quit} Gnus.\\
r & Re-read the init file ({\bf reset}).\\
- s & {\bf Save} the `.newsrc.eld' file (and `.newsrc' if
- `gnus-save-newsrc-file').\\
+ s & {\bf Save} `.newsrc.eld' file (and `.newsrc' if
+ `gnus-save-newsrc-file').\\
z & Suspend (kill all buffers of) Gnus.\\
B & {\bf Browse} a foreign server.\\
C & Mark all articles in this group as read ({\bf Catch-up}). [p/p]\\
M-c & Clear data from group (marks and list of read articles). \\
C-c C-s & {\bf Sort} the groups by name, number of unread articles, or level
(depending on `gnus-group-sort-function').\\
- C-c C-x & Run all expirable articles in this group through the {\bf expiry}
+ C-c C-x & Run all expirable articles in group through the {\bf expiry}
process.\\
C-c M-C-x & Run all articles in all groups through the {\bf expiry} process.\\
C-c M-g & Activate all {\bf groups}.\\
ange-ftp). [Prefix: query for group]\\
H v & (V) Display the Gnus {\bf version} number.\\
H d & (C-c C-d) Show the {\bf description} of this group
- [Prefix: re-read from server].\\
+ [Prefix: re-read from server].\\
M-d & {\bf Describe} all groups. [Prefix: re-read from server]\\
D g & Regenerate a Sieve script from group parameters.\\
D u & Regenerate Sieve script and {\bf upload} to server.\\
\newcommand{\ListGroups}{%
{\esamepage
\begin{keys}{A M}
- A d & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\
+ A d & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\
A k & (C-c C-l) List all {\bf killed} groups.
[Prefix: look at active-file from server]\\
A l & List all groups on a specific level.
[Prefix: also list groups with no unread articles]\\
A a & (C-c C-a) List all groups whose names match a regexp
- ({\bf apropos}).\\
+ ({\bf apropos}).\\
A A & List the server's active-file.\\
A M & List groups that {\bf match} a regexp.\\
- A m & List groups that {\bf match} a regexp and have unread articles.
- [level]\\
+ A m & List groups that {\bf match} a regexp and have unread articles.
+ [level]\\
A s & (l) List all {\bf subscribed} groups with unread articles.
[level; 5 and lower is the default]\\
A u & (L) List all groups (including read and {\bf unsubscribed}).
A ? & List all groups with dormant articles. [level]\\
\end{keys}
}
-
+
\newcommand{\CreateEditGroups}{%
{\esamepage
The select methods are indicated in parentheses.\\*
\begin{keys}{M m}
M m & (\#) Set the process {\bf mark} on this group. [scope]\\
M r & Mark all groups matching regular expression.\\
- M u & (M-\#) Remove the process mark from this group ({\bf unmark}).
- [scope]\\
- M U & Remove the process mark from all groups (\textbf{umark all}).\\
+ M u & (M-\#) Remove process mark from this group ({\bf unmark}).
+ [scope]\\
+ M U & Remove the process mark from all groups (\textbf{unmark all}).\\
M w & Mark all groups in the current region. [prefix: unmark]\\
M b & Mark all groups in the {\bf buffer}. [prefix: unmark]\\
\end{keys}}
T DEL & Delete an empty topic.\\
T \# & Mark all groups in the current topic with the process-mark.\\
T M-\# & Remove the process-mark from all groups in the current topic.\\
- T TAB & (TAB) Indent current topic [Prefix: unindent].\\
+ T TAB & (TAB) Indent current topic [Prefix: unindent].\\
M-TAB & Unindent the current topic.\\
RET & (SPC) Either unfold topic or enter group [level].\\
T s & {\bf Show} the current topic. [Prefix: show permanently]\\
{\esamepage
\begin{keys}{M-RET}
SPC & (A SPC, A n) Select an article, scroll it one page, move to the
- next one.\\
+ next one.\\
DEL & (A DEL, A p, b) Scroll this article one page back. [distance]\\
RET & (A RET) Scroll this article one line forward. [distance]\\
M-RET & (A M-RET) Scroll this article one line backward. [distance]\\
[Prefix: move backwards]\\
M-\& & Execute a command on all articles having the process mark.\\
%
- M-n & (G M-n) Go to the {\bf next} summary line of an unread article.
- [distance]\\
- M-p & (G M-p) Go to the {\bf previous} summary line of an unread article.
- [distance]\\
+ M-n & (G M-n) Go to {\bf next} summary line of unread article.
+ [distance]\\
+ M-p & (G M-p) Go to {\bf previous} summary line of an unread article.
+ [distance]\\
M-s & {\bf Search} through all subsequent articles for a regexp.\\
M-r & Search through all previous articles for a regexp.\\
%
M-C-d & Like C-d, but open several documents in nndoc-groups, wrapped
in an nnvirtual group [p/p]\\
%
- A g & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\
+ A g & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\
A r & (\^{}, A \^{}) Fetch the parent(s) of this article.
[Prefix: if positive fetch \textit{n} ancestors;
negative: fetch only the \textit{n}th ancestor]\\
prefix selects which part to operate on. If the point is placed over a
MIME button in the article buffer, use the corresponding bindings for the
article buffer instead.
-
+
\begin{keys}{W M w}
K v & (b, W M b) {\bf View} the MIME-part.\\
K o & {\bf Save} the MIME part.\\
B t & {\bf Trace} the fancy splitting patterns applied to this article.\\
B w & (e) Edit this article.\\
B M-C-e & {\bf Expunge} (delete from disk) all expirable articles in this group
- (!). [p/p]\\
+ (!). [p/p]\\
K E & {\bf Encrypt} article body. [p/p]\\
\end{keys}
}
\newcommand{\SelectArticles}{% formerly \Gsubmap
{\esamepage
- These commands select the target article. They do not understand the prefix.\\*
+ These commands select the target article. They do not use the prefix.\\*
\begin{keys}{G C-n}
h & Enter article-buffer.\\
G b & (,) Go to the {\bf best} article (the one with highest score).\\
W 6 & Translate a base64 article.\\
W a & Strip certain {\bf headers} from body.\\
W b & Make Message-IDs and URLs in the article mouse-clickable
- {\bf buttons}.\\
- W c & Translate CRLF-pairs to LF and then the remaining CR's to LF's.\\
+ {\bf buttons}.\\
+ W c & Translate CRLF-pairs to LF and then remaining CR's to LF's.\\
W d & Treat {\bf dumbquotes}.\\
W e & Treat {\bf emphasized} text.\\
W h & Treat {\bf HTML}.\\
}
}
- \newcommand{\BlankAndWhitespace}{%
+ \newcommand{\BlankAndWhitespace}{%
{\esamepage
\begin{keys}{W E w}
W E l & Strip blank {\bf lines} from the beginning of the article.\\
W E m & Replace blank lines with empty lines and remove {\bf multiple}
blank lines.\\
W E t & Remove {\bf trailing} blank lines.\\
- W E a & Strip blank lines at the beginning and the end
+ W E a & Strip blank lines at start and end
(W E l, W E m and W E t).\\
W E A & Strip {\bf all} blank lines.\\
W E s & Strip leading blank lines from the article body.\\
}
}
- \newcommand{\Picons}{%
+ \newcommand{\Picons}{%
{\esamepage
\begin{keys}{W D D}
W D s & (W g) Display {\bf smilies}.\\
}
}
- \newcommand{\TimeAndDate}{%
+ \newcommand{\TimeAndDate}{%
{\esamepage
\begin{keys}{W T u}
W T u & (W T z) Display the article timestamp in GMT ({\bf UT, ZULU}).\\
W T e & Display the time {\bf elapsed} since it was sent.\\
W T o & Display the {\bf original} timestamp.\\
W T p & Display the date in format that's {\bf
- pronounceable} in English.\\
+ pronounceable} in English.\\
\end{keys}
}
}
{\esamepage
\begin{keys}{M M-C-r}
d & (M d, M r) Mark this article as read and move to the next one.
- [scope]\\
- D & Mark this article as read and move to the previous one. [scope]\\
+ [scope]\\
+ D & Mark this article as read and move to previous one. [scope]\\
! & (u, M !, M t) Tick this article (mark it as interesting) and move
to the next one. [scope]\\
- U & Tick this article and move to the previous one. [scope]\\
+ U & Tick this article and move to the previous one. [scope]\\
M ? & (?) Mark this article as dormant (only followups are
- interesting). [scope]\\
+ interesting). [scope]\\
M D & Show all {\bf dormant} articles (normally they are hidden unless they
have any followups).\\
M M-D & Hide all {\bf dormant} articles.\\
C-w & Mark all articles between point and mark as read.\\
M-u & (M SPC, M c) Clear all marks from this article and move to the next
- one. [scope]\\
+ one. [scope]\\
M-U & Clear all marks from this article and move to the previous one.
[scope]\\
%
M e & (E, M x) Mark this article as {\bf expirable}. [scope]\\
%
- M k & (k) {\bf Kill} all articles with the same subject then select the
- next unread one.\\
+ M k & (k) {\bf Kill} all articles with same subject, select
+ next unread one.\\
M K & (C-k) {\bf Kill} all articles with the same subject as this one.\\
%
M C & {\bf Catch-up} the articles that are not ticked and not dormant.\\
}
\newcommand{\ProcessMark}{%
- {\esamepage
+ {\esamepage
These commands set and remove the process mark (\#). You only need to use
it if the set of articles you want to operate on is non-contiguous. Else
use a numeric prefix.\\*
M P a & Mark {\bf all} articles (in series order).\\
M P U & \textbf{unmark} all articles.\\
M P i & {\bf Invert} the list of process-marked articles.\\
- M P k & Push the current process-mark set onto stack and unmark
+ M P k & Push process-mark set onto stack and unmark
all articles.\\
M P y & Pop process-mark set from stack and restore it.\\
M P w & Push process-mark set on the stack.\\
- M P v & Mark all articles with score over the default score. [Prefix: score]\\
+ M P v & Mark all articles with score over default score. [Prefix: score]\\
\end{keys}
}
}
/t & Ask for a number and exclude articles younger than that many days.
[Prefix: exclude older articles]\\
/n & Limit to current article. [p/p]\\
- /w & Pop the previous limit off the stack and restore it.
+ /w & Pop previous limit off stack and restore it.
[Prefix: pop all limits]\\
/v & Limit to score. [score]\\
/E & (M S) Include all expunged articles in the limit.\\
%After
%editing the article, send it by pressing C-c C-c. If you are in a
%foreign group and want to post the article using the foreign server, give
- %a prefix to C-c C-c.\\*
+ %a prefix to C-c C-c.\\*
\begin{keys}{S O m}
S p & (a) {\bf Post} an article to this group.\\
S f & (f) Post a {\bf followup} to this article.\\
S F & (F) Post a {\bf followup} and include the original. [p/p]\\
S o p & Forward this article as a {\bf post} to a newsgroup.\\
- S M-c & Send a complaint about excessive crossposting to the author of this
- article. [p/p]\\
+ S M-c & Complain about excessive crossposting to
+ article's author. [p/p]\\
%
S m & (m) Send a {\bf mail} to some other person.\\
S r & (r) Mail a {\bf reply} to the author of this article.\\
%
S O m & Digest these series and forward by {\bf mail}. [p/p]\\
S O p & Digest these series and forward as a {\bf post} to a newsgroup.
- [p/p]\\
+ [p/p]\\
%
S u & {\bf Uuencode} a file and post it as a series.\\
\end{keys}
If you want to cancel or supersede an article you just posted (before it
has appeared on the server), go to the *post-news* buffer, change
- `Message-ID' to `Cancel' or `Supersedes' and send it again with C-c C-c.
+ `Message-ID' to `Cancel' or `Supersedes' and send again with C-c C-c.
}}
\newcommand{\Threading}{% formerly \Tsubmap
T M-\# & Remove process-marks from this thread.\\
%
T t & Re-{\bf thread} the current article's thread.\\
- T \^{} & Make the current article child of the marked (or previous) article.\\
+ T \^{} & Make the current article child of the marked (or previous) one.\\
% movement
T n & (M-C-f, M-down) Go to the {\bf next} thread. [distance]\\
T p & (M-C-b, M-up) Go to the {\bf previous} thread. [distance]\\
V t & Display all score rules applied to this article ({\bf track}).\\
W w & List {\bf words} used in scoring.\\
V x & {\bf Expunge} all low-scored articles. [score]\\
- V C & {\bf Customize} the current score file through a user-friendly
+ V C & {\bf Customize} current score file with a user-friendly
interface.\\
V F & {\bf Flush} the cache of score files.\\
V R & {\bf Re-score} the summary buffer.\\
\end{keys}
The four letters stand for:\\*
\quad \B{A}ction: I)ncrease, L)ower;\\*
- \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-posting), d)ate, l)ines,
+ \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-post), d)ate, l)ines,
message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\*
\quad \B{m}atch type:\\*
\qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\*
\quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate.
If you type the second letter in uppercase, the remaining two are assumed
- to be s)ubstring and t)emporary.
- If you type the third letter in uppercase, the last one is assumed to be
+ to be s)ubstring and t)emporary.
+ If you type the third letter in uppercase, the last one is assumed to be
t)emporary.
\quad Extra keys for manual editing of a score file:\\*
archives, they are expanded and gathered in a new group.\\*
\begin{keys}{X p}
X b & Un-{\bf binhex} these series. [p/p]\\
- X o & Simply {\bf output} these series (no decoding). [p/p]\\
+ X o & Simply {\bf output} these series (no decoding). [p/p]\\
X p & Unpack these {\bf postscript} series. [p/p]\\
X s & Un-{\bf shar} these series. [p/p]\\
X u & {\bf Uudecode} these series. [p/p]\\
}
}
-% end {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
+% end {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
% o some things might not be updated: scoring and server modes, maybe more
\begin{document}
-\def\progver{5.10}\def\refver{5.10-1} % program and refcard versions
-\def\date{Jan 10th, 2004}
-\def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$}
-
\ifthenelse{\isundefined{\booklettrue}}{ % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\raggedbottom\raggedright
\twocolumn
\ListGroups
\subsection*{Create/Edit Foreign Groups}
\CreateEditGroups
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
\subsection*{Unsubscribe, Kill and Yank Groups}
\SubscribeKillYankGroups
\subsection*{Mark Groups}
\subsection*{Select Articles}
\SelectArticles
%
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
\subsection*{Threading}
\Threading
%
\SortSummary
\subsection*{Score (Value) Commands}
\Scoring
-
+
\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection*{Output Articles}
\OutputArticles
\subsection*{MIME operations from the Summary-Buffer}
\MIMESummary
-
+
\ifthenelse{\isundefined{\booklettrue}}{}{% ifbooklet %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection*{Extract Series (Uudecode etc)}
\ExtractSeries
%
\subsection*{Post, Followup, Reply, Forward, Cancel}
\PostReplyetc
-
+
\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% newpage ifcard
\subsection*{Message Composition}
\subsubsection*{Mark Indication-Characters}
\MarkCharacters
%
-\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}%
-
+%\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}%
+ \newpage
\subsection*{Summary-Unplugged}
\SummaryUnplugged
\subsection*{Mail-Group Commands}
\Picons
\subsubsection*{Time and Date}
\TimeAndDate
+ \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
\subsection*{Hide/Highlight Parts of the Article}
\HideHighlightArticle
\subsection*{MIME operations from the Article-Buffer (reading)}
\MIMEArticleMode
%
%
+\ifthenelse{\isundefined{\booklettrue}}{\pagebreak}{}%
\section*{Server Mode}
\ServerMode
\subsection*{Unplugged-Server}
%%% mode: latex
%%% TeX-master: t
%%% End:
-
-% arch-tag: be438b0e-6832-4afb-8c56-5f84743e5cd1