(gnus-spam-mark): set to `$'
[gnus] / lisp / nntp.el
index 78ccb16..f8b847d 100644 (file)
@@ -1,24 +1,26 @@
 ;;; nntp.el --- nntp access for Gnus
-;;; Copyright (C) 1987-90,92-97 Free Software Foundation, Inc.
 
-;; Author: Lars Magne Ingebrigtsen <larsi@ifi.uio.no>
+;; Copyright (C) 1987, 1988, 1989, 1990, 1992, 1993, 1994, 1995, 1996,
+;; 1997, 1998, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+;; Author: Lars Magne Ingebrigtsen <larsi@gnus.org>
 ;; Keywords: news
 
 ;; This file is part of GNU Emacs.
 
 ;; GNU Emacs is free software; you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
-;; any later version.
+;; it under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 2, or (at your
+;; option) any later version.
 
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
+;; GNU Emacs is distributed in the hope that it will be useful, but
+;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+;; General Public License for more details.
 
 ;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING.  If not, write to
-;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+;; along with GNU Emacs; see the file COPYING.  If not, write to the
+;; Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 
 ;;; Commentary:
 
 
 (nnoo-declare nntp)
 
-(eval-and-compile
-  (unless (fboundp 'open-network-stream)
-    (require 'tcp)))
-
 (eval-when-compile (require 'cl))
 
 (defvoo nntp-address nil
 (defvoo nntp-server-opened-hook '(nntp-send-mode-reader)
   "*Hook used for sending commands to the server at startup.
 The default value is `nntp-send-mode-reader', which makes an innd
-server spawn an nnrpd server.  Another useful function to put in this
-hook might be `nntp-send-authinfo', which will prompt for a password
-to allow posting from the server.  Note that this is only necessary to
-do on servers that use strict access control.")
+server spawn an nnrpd server.")
 
 (defvoo nntp-authinfo-function 'nntp-send-authinfo
-  "Function used to send AUTHINFO to the server.")
+  "Function used to send AUTHINFO to the server.
+It is called with no parameters.")
 
 (defvoo nntp-server-action-alist
-  '(("nntpd 1\\.5\\.11t"
-     (remove-hook 'nntp-server-opened-hook 'nntp-send-mode-reader))
-    ("NNRP server Netscape"
-     (setq nntp-server-list-active-group nil)))
+    '(("nntpd 1\\.5\\.11t"
+       (remove-hook 'nntp-server-opened-hook 'nntp-send-mode-reader))
+      ("NNRP server Netscape"
+       (setq nntp-server-list-active-group nil)))
   "Alist of regexps to match on server types and actions to be taken.
 For instance, if you want Gnus to beep every time you connect
 to innd, you could say something like:
@@ -69,56 +65,77 @@ You probably don't want to do that, though.")
 
 (defvoo nntp-open-connection-function 'nntp-open-network-stream
   "*Function used for connecting to a remote system.
-It will be called with the buffer to output in.
+It will be called with the buffer to output in as argument.
 
-Two pre-made functions are `nntp-open-network-stream', which is the
-default, and simply connects to some port or other on the remote
-system (see nntp-port-number).  The other are `nntp-open-rlogin',
-which does an rlogin on the remote system, and then does a telnet to
-the NNTP server available there (see nntp-rlogin-parameters) and
-`nntp-open-telnet' which telnets to a remote system, logs in and does
-the same.")
+Currently, five such functions are provided (please refer to their
+respective doc string for more information), three of them establishing
+direct connections to the nntp server, and two of them using an indirect
+host.
 
-(defvoo nntp-rlogin-program "rsh"
-  "*Program used to log in on remote machines.
-The default is \"rsh\", but \"ssh\" is a popular alternative.")
+Direct connections:
+- `nntp-open-network-stream' (the default),
+- `nntp-open-ssl-stream',
+- `nntp-open-telnet-stream'.
 
-(defvoo nntp-rlogin-parameters '("telnet" "-8" "${NNTPSERVER:=news}" "nntp")
-  "*Parameters to `nntp-open-login'.
-That function may be used as `nntp-open-connection-function'.  In that
-case, this list will be used as the parameter list given to rsh.")
+Indirect connections:
+- `nntp-open-via-rlogin-and-telnet',
+- `nntp-open-via-telnet-and-telnet'.")
 
-(defvoo nntp-rlogin-user-name nil
-  "*User name on remote system when using the rlogin connect method.")
+(defvoo nntp-pre-command nil
+  "*Pre-command to use with the various nntp-open-via-* methods.
+This is where you would put \"runsocks\" or stuff like that.")
 
-(defvoo nntp-telnet-parameters '("exec" "telnet" "-8" "${NNTPSERVER:=news}" "nntp")
-  "*Parameters to `nntp-open-telnet'.
-That function may be used as `nntp-open-connection-function'.  In that
-case, this list will be executed as a command after logging in
-via telnet.")
+(defvoo nntp-telnet-command "telnet"
+  "*Telnet command used to connect to the nntp server.
+This command is used by the various nntp-open-via-* methods.")
 
-(defvoo nntp-telnet-user-name nil
-  "User name to log in via telnet with.")
+(defvoo nntp-telnet-switches '("-8")
+  "*Switches given to the telnet command `nntp-telnet-command'.")
 
-(defvoo nntp-telnet-passwd nil
-  "Password to use to log in via telnet with.")
+(defvoo nntp-end-of-line "\r\n"
+  "*String to use on the end of lines when talking to the NNTP server.
+This is \"\\r\\n\" by default, but should be \"\\n\" when
+using and indirect connection method (nntp-open-via-*).")
 
-(defvoo nntp-open-telnet-envuser nil
-  "*If non-nil, telnet session (client and server both) will support the ENVIRON option and not prompt for login name.")
+(defvoo nntp-via-rlogin-command "rsh"
+  "*Rlogin command used to connect to an intermediate host.
+This command is used by the `nntp-open-via-rlogin-and-telnet' method.
+The default is \"rsh\", but \"ssh\" is a popular alternative.")
 
-(defvoo nntp-telnet-shell-prompt "bash\\|\$ *\r?$\\|> *\r?"
-  "*Regular expression to match the shell prompt on the remote machine.")
+(defvoo nntp-via-rlogin-command-switches nil
+  "*Switches given to the rlogin command `nntp-via-rlogin-command'.
+If you use \"ssh\" for `nntp-via-rlogin-command', you may set this to
+\(\"-C\") in order to compress all data connections, otherwise set this
+to \(\"-t\") or (\"-C\" \"-t\") if the telnet command requires a pseudo-tty
+allocation on an intermediate host.")
 
-(defvoo nntp-telnet-command "telnet"
-  "Command used to start telnet.")
+(defvoo nntp-via-telnet-command "telnet"
+  "*Telnet command used to connect to an intermediate host.
+This command is used by the `nntp-open-via-telnet-and-telnet' method.")
 
-(defvoo nntp-telnet-switches '("-8")
-  "Switches given to the telnet command.")
+(defvoo nntp-via-telnet-switches '("-8")
+  "*Switches given to the telnet command `nntp-via-telnet-command'.")
 
-(defvoo nntp-end-of-line "\r\n"
-  "String to use on the end of lines when talking to the NNTP server.
-This is \"\\r\\n\" by default, but should be \"\\n\" when
-using rlogin or telnet to communicate with the server.")
+(defvoo nntp-via-user-name nil
+  "*User name to log in on an intermediate host with.
+This variable is used by the `nntp-open-via-telnet-and-telnet' method.")
+
+(defvoo nntp-via-user-password nil
+  "*Password to use to log in on an intermediate host with.
+This variable is used by the `nntp-open-via-telnet-and-telnet' method.")
+
+(defvoo nntp-via-address nil
+  "*Address of an intermediate host to connect to.
+This variable is used by the `nntp-open-via-rlogin-and-telnet' and
+`nntp-open-via-telnet-and-telnet' methods.")
+
+(defvoo nntp-via-envuser nil
+  "*Whether both telnet client and server support the ENVIRON option.
+If non-nil, there will be no prompt for a login name.")
+
+(defvoo nntp-via-shell-prompt "bash\\|\$ *\r?$\\|> *\r?"
+  "*Regular expression to match the shell prompt on an intermediate host.
+This variable is used by the `nntp-open-via-telnet-and-telnet' method.")
 
 (defvoo nntp-large-newsgroup 50
   "*The number of the articles which indicates a large newsgroup.
@@ -144,10 +161,6 @@ by one.")
 If the gap between two consecutive articles is bigger than this
 variable, split the XOVER request into two requests.")
 
-(defvoo nntp-connection-timeout nil
-  "*Number of seconds to wait before an nntp connection times out.
-If this variable is nil, which is the default, no timers are set.")
-
 (defvoo nntp-prepare-server-hook nil
   "*Hook run before a server is opened.
 If can be used to set up a server remotely, for instance.  Say you
@@ -167,7 +180,7 @@ server there that you can connect to.  See also
   "*Coding system to write to NNTP.")
 
 (defcustom nntp-authinfo-file "~/.authinfo"
-  "Docstring."
+  ".netrc-like file that holds nntp authinfo passwords."
   :type
   '(choice file
           (repeat :tag "Entries"
@@ -185,6 +198,15 @@ server there that you can connect to.  See also
 
 \f
 
+(defvoo nntp-connection-timeout nil
+  "*Number of seconds to wait before an nntp connection times out.
+If this variable is nil, which is the default, no timers are set.
+NOTE: This variable is never seen to work in Emacs 20 and XEmacs 21.")
+
+(defvoo nntp-prepare-post-hook nil
+  "*Hook run just before posting an article.  It is supposed to be used
+to insert Cancel-Lock headers.")
+
 ;;; Internal variables.
 
 (defvar nntp-record-commands nil
@@ -201,6 +223,7 @@ server there that you can connect to.  See also
 (defvoo nntp-last-command-time nil)
 (defvoo nntp-last-command nil)
 (defvoo nntp-authinfo-password nil)
+(defvoo nntp-authinfo-user nil)
 
 (defvar nntp-connection-list nil)
 
@@ -214,8 +237,19 @@ server there that you can connect to.  See also
 (defvoo nntp-server-xover 'try)
 (defvoo nntp-server-list-active-group 'try)
 
+(defvar nntp-async-needs-kluge
+  (string-match "^GNU Emacs 20\\.3\\." (emacs-version))
+  "*When non-nil, nntp will poll asynchronous connections
+once a second.  By default, this is turned on only for Emacs
+20.3, which has a bug that breaks nntp's normal method of
+noticing asynchronous data.")
+
+(defvar nntp-async-timer nil)
+(defvar nntp-async-process-list nil)
+
 (eval-and-compile
-  (autoload 'nnmail-read-passwd "nnmail"))
+  (autoload 'mail-source-read-passwd "mail-source")
+  (autoload 'open-ssl-stream "ssl"))
 
 \f
 
@@ -230,15 +264,40 @@ server there that you can connect to.  See also
        nntp-last-command string)
   (when nntp-record-commands
     (nntp-record-command string))
-  (process-send-string process (concat string nntp-end-of-line)))
+  (process-send-string process (concat string nntp-end-of-line))
+  (or (memq (process-status process) '(open run))
+      (nntp-report "Server closed connection")))
 
 (defun nntp-record-command (string)
   "Record the command STRING."
   (save-excursion
     (set-buffer (get-buffer-create "*nntp-log*"))
     (goto-char (point-max))
-    (insert (format-time-string "%Y%m%dT%H%M%S" (current-time))
-           " " nntp-address " " string "\n")))
+    (let ((time (current-time)))
+      (insert (format-time-string "%Y%m%dT%H%M%S" time)
+             "." (format "%03d" (/ (nth 2 time) 1000))
+             " " nntp-address " " string "\n"))))
+
+(defun nntp-report (&rest args)
+  "Report an error from the nntp backend.  The first string in ARGS
+can be a format string.  For some commands, the failed command may be
+retried once before actually displaying the error report."
+
+  (when nntp-record-commands
+    (nntp-record-command "*** CALLED nntp-report ***"))
+
+  (nnheader-report 'nntp args)
+
+  (apply 'error args))
+
+(defun nntp-report-1 (&rest args)
+  "Throws out to nntp-with-open-group-error so that the connection may
+be restored and the command retried."
+
+  (when nntp-record-commands
+    (nntp-record-command "*** CONNECTION LOST ***"))
+
+  (throw 'nntp-with-open-group-error t))
 
 (defsubst nntp-wait-for (process wait-for buffer &optional decode discard)
   "Wait for WAIT-FOR to arrive from PROCESS."
@@ -250,6 +309,8 @@ server there that you can connect to.  See also
                (memq (process-status process) '(open run)))
       (when (looking-at "480")
        (nntp-handle-authinfo process))
+      (when (looking-at "^.*\n")
+       (delete-region (point) (progn (forward-line 1) (point))))
       (nntp-accept-process-output process)
       (goto-char (point-min)))
     (prog1
@@ -259,16 +320,20 @@ server there that you can connect to.  See also
            (nntp-snarf-error-message)
            nil))
         ((not (memq (process-status process) '(open run)))
-         (nnheader-report 'nntp "Server closed connection"))
+         (nntp-report "Server closed connection"))
         (t
          (goto-char (point-max))
-         (let ((limit (point-min)))
+         (let ((limit (point-min))
+               response)
            (while (not (re-search-backward wait-for limit t))
              (nntp-accept-process-output process)
              ;; We assume that whatever we wait for is less than 1000
              ;; characters long.
              (setq limit (max (- (point-max) 1000) (point-min)))
-             (goto-char (point-max))))
+             (goto-char (point-max)))
+           (setq response (match-string 0))
+           (with-current-buffer nntp-server-buffer
+             (setq nntp-process-response response)))
          (nntp-decode-text (not decode))
          (unless discard
            (save-excursion
@@ -278,25 +343,29 @@ server there that you can connect to.  See also
              ;; Nix out "nntp reading...." message.
              (when nntp-have-messaged
                (setq nntp-have-messaged nil)
-               (message ""))
-             t))))
+               (nnheader-message 5 ""))))
+         t))
       (unless discard
        (erase-buffer)))))
 
+(defun nntp-kill-buffer (buffer)
+  (when (buffer-name buffer)
+    (kill-buffer buffer)
+    (nnheader-init-server-buffer)))
+
 (defsubst nntp-find-connection (buffer)
   "Find the connection delivering to BUFFER."
   (let ((alist nntp-connection-alist)
        (buffer (if (stringp buffer) (get-buffer buffer) buffer))
        process entry)
-    (while (setq entry (pop alist))
+    (while (and alist (setq entry (pop alist)))
       (when (eq buffer (cadr entry))
        (setq process (car entry)
              alist nil)))
     (when process
       (if (memq (process-status process) '(open run))
          process
-       (when (buffer-name (process-buffer process))
-         (kill-buffer (process-buffer process)))
+       (nntp-kill-buffer (process-buffer process))
        (setq nntp-connection-alist (delq entry nntp-connection-alist))
        nil))))
 
@@ -315,33 +384,33 @@ server there that you can connect to.  See also
   "Use COMMAND to retrieve data into BUFFER from PORT on ADDRESS."
   (let ((process (or (nntp-find-connection buffer)
                     (nntp-open-connection buffer))))
-    (if (not process)
-       (nnheader-report 'nntp "Couldn't open connection to %s" address)
-      (unless (or nntp-inhibit-erase nnheader-callback-function)
-       (save-excursion
-         (set-buffer (process-buffer process))
-         (erase-buffer)))
-      (when command
-       (nntp-send-string process command))
-      (cond
-       ((eq callback 'ignore)
-       t)
-       ((and callback wait-for)
-       (save-excursion
-         (set-buffer (process-buffer process))
-         (unless nntp-inside-change-function
-           (erase-buffer))
-         (setq nntp-process-decode decode
-               nntp-process-to-buffer buffer
-               nntp-process-wait-for wait-for
-               nntp-process-callback callback
-               nntp-process-start-point (point-max)
-               after-change-functions
-               (list 'nntp-after-change-function-callback)))
-       t)
-       (wait-for
-       (nntp-wait-for process wait-for buffer decode))
-       (t t)))))
+    (if process
+        (progn
+          (unless (or nntp-inhibit-erase nnheader-callback-function)
+            (save-excursion
+              (set-buffer (process-buffer process))
+              (erase-buffer)))
+          (condition-case err
+              (progn
+                (when command
+                  (nntp-send-string process command))
+                (cond
+                 ((eq callback 'ignore)
+                  t)
+                 ((and callback wait-for)
+                  (nntp-async-wait process wait-for buffer decode callback)
+                  t)
+                 (wait-for
+                  (nntp-wait-for process wait-for buffer decode))
+                 (t t)))
+            (error
+             (nnheader-report 'nntp "Couldn't open connection to %s: %s"
+                              address err))
+            (quit
+             (message "Quit retrieving data from nntp")
+             (signal 'quit nil)
+             nil)))
+      (nnheader-report 'nntp "Couldn't open connection to %s" address))))
 
 (defsubst nntp-send-command (wait-for &rest strings)
   "Send STRINGS to server and wait until WAIT-FOR returns."
@@ -350,17 +419,57 @@ server there that you can connect to.  See also
     (save-excursion
       (set-buffer nntp-server-buffer)
       (erase-buffer)))
-  (nntp-retrieve-data
-   (mapconcat 'identity strings " ")
-   nntp-address nntp-port-number nntp-server-buffer
-   wait-for nnheader-callback-function))
+  (let* ((command (mapconcat 'identity strings " "))
+        (process (nntp-find-connection nntp-server-buffer))
+        (buffer (and process (process-buffer process)))
+        (pos (and buffer (with-current-buffer buffer (point)))))
+    (if process
+       (prog1
+           (nntp-retrieve-data command
+                               nntp-address nntp-port-number
+                               nntp-server-buffer
+                               wait-for nnheader-callback-function)
+         ;; If nothing to wait for, still remove possibly echo'ed commands.
+         ;; We don't have echos if nntp-open-connection-function
+         ;; is `nntp-open-network-stream', so we skip this in that case.
+         (unless (or wait-for
+                     (equal nntp-open-connection-function
+                            'nntp-open-network-stream))
+           (nntp-accept-response)
+           (save-excursion
+             (set-buffer buffer)
+             (goto-char pos)
+             (if (looking-at (regexp-quote command))
+                 (delete-region pos (progn (forward-line 1)
+                                           (gnus-point-at-bol))))
+             )))
+      (nnheader-report 'nntp "Couldn't open connection to %s."
+                      nntp-address))))
 
 (defun nntp-send-command-nodelete (wait-for &rest strings)
   "Send STRINGS to server and wait until WAIT-FOR returns."
-  (nntp-retrieve-data
-   (mapconcat 'identity strings " ")
-   nntp-address nntp-port-number nntp-server-buffer
-   wait-for nnheader-callback-function))
+  (let* ((command (mapconcat 'identity strings " "))
+        (process (nntp-find-connection nntp-server-buffer))
+        (buffer (and process (process-buffer process)))
+        (pos (and buffer (with-current-buffer buffer (point)))))
+    (if process
+       (prog1
+           (nntp-retrieve-data command
+                               nntp-address nntp-port-number
+                               nntp-server-buffer
+                               wait-for nnheader-callback-function)
+         ;; If nothing to wait for, still remove possibly echo'ed commands
+         (unless wait-for
+           (nntp-accept-response)
+           (save-excursion
+             (set-buffer buffer)
+             (goto-char pos)
+             (if (looking-at (regexp-quote command))
+                 (delete-region pos (progn (forward-line 1)
+                                           (gnus-point-at-bol))))
+             )))
+      (nnheader-report 'nntp "Couldn't open connection to %s."
+                      nntp-address))))
 
 (defun nntp-send-command-and-decode (wait-for &rest strings)
   "Send STRINGS to server and wait until WAIT-FOR returns."
@@ -369,10 +478,28 @@ server there that you can connect to.  See also
     (save-excursion
       (set-buffer nntp-server-buffer)
       (erase-buffer)))
-  (nntp-retrieve-data
-   (mapconcat 'identity strings " ")
-   nntp-address nntp-port-number nntp-server-buffer
-   wait-for nnheader-callback-function t))
+  (let* ((command (mapconcat 'identity strings " "))
+        (process (nntp-find-connection nntp-server-buffer))
+        (buffer (and process (process-buffer process)))
+        (pos (and buffer (with-current-buffer buffer (point)))))
+    (if process
+       (prog1
+           (nntp-retrieve-data command
+                               nntp-address nntp-port-number
+                               nntp-server-buffer
+                               wait-for nnheader-callback-function t)
+         ;; If nothing to wait for, still remove possibly echo'ed commands
+         (unless wait-for
+           (nntp-accept-response)
+           (save-excursion
+         (set-buffer buffer)
+         (goto-char pos)
+         (if (looking-at (regexp-quote command))
+             (delete-region pos (progn (forward-line 1) (gnus-point-at-bol))))
+         )))
+      (nnheader-report 'nntp "Couldn't open connection to %s."
+                      nntp-address))))
+
 
 (defun nntp-send-buffer (wait-for)
   "Send the current buffer to server and wait until WAIT-FOR returns."
@@ -382,8 +509,10 @@ server there that you can connect to.  See also
       (set-buffer (nntp-find-connection-buffer nntp-server-buffer))
       (erase-buffer)))
   (nntp-encode-text)
-  (process-send-region (nntp-find-connection nntp-server-buffer)
-                      (point-min) (point-max))
+  (mm-with-unibyte-current-buffer
+    ;; Some encoded unicode text contains character 0x80-0x9f e.g. Euro.
+    (process-send-region (nntp-find-connection nntp-server-buffer)
+                        (point-min) (point-max)))
   (nntp-retrieve-data
    nil nntp-address nntp-port-number nntp-server-buffer
    wait-for nnheader-callback-function))
@@ -395,210 +524,308 @@ server there that you can connect to.  See also
 (nnoo-define-basics nntp)
 
 (defsubst nntp-next-result-arrived-p ()
-  (let ((point (point)))
-    (cond
-     ((eq (following-char) ?2)
-      (if (re-search-forward "\n\\.\r?\n" nil t)
-         t
-       (goto-char point)
-       nil))
-     ((looking-at "[34]")
-      (forward-line 1)
-      t)
-     (t
-      nil))))
+  (cond
+   ;; A result that starts with a 2xx code is terminated by
+   ;; a line with only a "." on it.
+   ((eq (char-after) ?2)
+    (if (re-search-forward "\n\\.\r?\n" nil t)
+       t
+      nil))
+   ;; A result that starts with a 3xx or 4xx code is terminated
+   ;; by a newline.
+   ((looking-at "[34]")
+    (if (search-forward "\n" nil t)
+       t
+      nil))
+   ;; No result here.
+   (t
+    nil)))
+
+(eval-when-compile
+  (defvar nntp-with-open-group-internal nil)
+  (defvar nntp-report-n nil))
+
+(defmacro nntp-with-open-group (group server &optional connectionless &rest forms)
+  "Protect against servers that don't like clients that keep idle connections opens.
+The problem being that these servers may either close a connection or
+simply ignore any further requests on a connection.  Closed
+connections are not detected until accept-process-output has updated
+the process-status.  Dropped connections are not detected until the
+connection timeouts (which may be several minutes) or
+nntp-connection-timeout has expired.  When these occur
+nntp-with-open-group, opens a new connection then re-issues the NNTP
+command whose response triggered the error."
+  (when (and (listp connectionless)
+            (not (eq connectionless nil)))
+    (setq forms (cons connectionless forms)
+         connectionless nil))
+  `(letf ((nntp-report-n (symbol-function 'nntp-report))
+         ((symbol-function 'nntp-report) (symbol-function 'nntp-report-1))
+         (nntp-with-open-group-internal nil))
+     (while (catch 'nntp-with-open-group-error
+             ;; Open the connection to the server
+             ;; NOTE: Existing connections are NOT tested.
+             (nntp-possibly-change-group ,group ,server ,connectionless)
+
+             (let ((timer
+                    (and nntp-connection-timeout
+                         (nnheader-run-at-time
+                          nntp-connection-timeout nil
+                          '(lambda ()
+                             (let ((process (nntp-find-connection
+                                             nntp-server-buffer))
+                                   (buffer  (and process
+                                                 (process-buffer process))))
+                                       ; when I an able to identify
+                                       ; the connection to the server
+                                       ; AND I've received NO reponse
+                                       ; for nntp-connection-timeout
+                                       ; seconds.
+                               (when (and buffer (eq 0 (buffer-size buffer)))
+                                       ; Close the connection.  Take
+                                       ; no other action as the
+                                       ; accept input code will
+                                       ; handle the closed
+                                       ; connection.
+                                 (nntp-kill-buffer buffer))))))))
+               (unwind-protect
+                   (setq nntp-with-open-group-internal
+                          (condition-case nil
+                             (progn ,@forms)
+                           (quit
+                            (nntp-close-server)
+                             (signal 'quit nil)))
+                          )
+                 (when timer
+                   (nnheader-cancel-timer timer)))
+               nil))
+       (setf (symbol-function 'nntp-report) nntp-report-n))
+     nntp-with-open-group-internal))
 
 (deffoo nntp-retrieve-headers (articles &optional group server fetch-old)
   "Retrieve the headers of ARTICLES."
-  (nntp-possibly-change-group group server)
-  (save-excursion
-    (set-buffer (nntp-find-connection-buffer nntp-server-buffer))
-    (erase-buffer)
-    (if (and (not gnus-nov-is-evil)
-            (not nntp-nov-is-evil)
-            (nntp-retrieve-headers-with-xover articles fetch-old))
-       ;; We successfully retrieved the headers via XOVER.
-        'nov
-      ;; XOVER didn't work, so we do it the hard, slow and inefficient
-      ;; way.
-      (let ((number (length articles))
-           (count 0)
-           (received 0)
-           (last-point (point-min))
-           (buf (nntp-find-connection-buffer nntp-server-buffer))
-           (nntp-inhibit-erase t)
-           article)
-       ;; Send HEAD commands.
-      (while (setq article (pop articles))
-       (nntp-send-command
-        nil
-        "HEAD" (if (numberp article)
-                   (int-to-string article)
-                 ;; `articles' is either a list of article numbers
-                 ;; or a list of article IDs.
-                 article))
-       (incf count)
-       ;; Every 400 requests we have to read the stream in
-       ;; order to avoid deadlocks.
-       (when (or (null articles)       ;All requests have been sent.
-                 (zerop (% count nntp-maximum-request)))
-         (nntp-accept-response)
-         (while (progn
-                  (set-buffer buf)
-                  (goto-char last-point)
-                  ;; Count replies.
-                  (while (nntp-next-result-arrived-p)
-                    (setq last-point (point))
-                    (incf received))
-                  (< received count))
-           ;; If number of headers is greater than 100, give
-           ;;  informative messages.
-           (and (numberp nntp-large-newsgroup)
-                (> number nntp-large-newsgroup)
-                (zerop (% received 20))
-                (nnheader-message 6 "NNTP: Receiving headers... %d%%"
-                                  (/ (* received 100) number)))
-           (nntp-accept-response))))
-       (and (numberp nntp-large-newsgroup)
-            (> number nntp-large-newsgroup)
-            (nnheader-message 6 "NNTP: Receiving headers...done"))
-
-       ;; Now all of replies are received.  Fold continuation lines.
-       (nnheader-fold-continuation-lines)
-       ;; Remove all "\r"'s.
-       (nnheader-strip-cr)
-       (copy-to-buffer nntp-server-buffer (point-min) (point-max))
-       'headers))))
+  (nntp-with-open-group
+   group server
+   (save-excursion
+     (set-buffer (nntp-find-connection-buffer nntp-server-buffer))
+     (erase-buffer)
+     (if (and (not gnus-nov-is-evil)
+              (not nntp-nov-is-evil)
+              (nntp-retrieve-headers-with-xover articles fetch-old))
+         ;; We successfully retrieved the headers via XOVER.
+         'nov
+       ;; XOVER didn't work, so we do it the hard, slow and inefficient
+       ;; way.
+       (let ((number (length articles))
+             (articles articles)
+             (count 0)
+             (received 0)
+             (last-point (point-min))
+             (buf (nntp-find-connection-buffer nntp-server-buffer))
+             (nntp-inhibit-erase t)
+             article)
+         ;; Send HEAD commands.
+         (while (setq article (pop articles))
+           (nntp-send-command
+            nil
+            "HEAD" (if (numberp article)
+                       (int-to-string article)
+                     ;; `articles' is either a list of article numbers
+                     ;; or a list of article IDs.
+                     article))
+           (incf count)
+           ;; Every 400 requests we have to read the stream in
+           ;; order to avoid deadlocks.
+           (when (or (null articles)    ;All requests have been sent.
+                     (zerop (% count nntp-maximum-request)))
+             (nntp-accept-response)
+             (while (progn
+                      (set-buffer buf)
+                      (goto-char last-point)
+                      ;; Count replies.
+                      (while (nntp-next-result-arrived-p)
+                        (setq last-point (point))
+                        (incf received))
+                      (< received count))
+               ;; If number of headers is greater than 100, give
+               ;;  informative messages.
+               (and (numberp nntp-large-newsgroup)
+                    (> number nntp-large-newsgroup)
+                    (zerop (% received 20))
+                    (nnheader-message 6 "NNTP: Receiving headers... %d%%"
+                                      (/ (* received 100) number)))
+               (nntp-accept-response))))
+         (and (numberp nntp-large-newsgroup)
+              (> number nntp-large-newsgroup)
+              (nnheader-message 6 "NNTP: Receiving headers...done"))
+
+         ;; Now all of replies are received.  Fold continuation lines.
+         (nnheader-fold-continuation-lines)
+         ;; Remove all "\r"'s.
+         (nnheader-strip-cr)
+         (copy-to-buffer nntp-server-buffer (point-min) (point-max))
+         'headers)))))
 
 (deffoo nntp-retrieve-groups (groups &optional server)
   "Retrieve group info on GROUPS."
-  (nntp-possibly-change-group nil server)
-  (save-excursion
-    (set-buffer (nntp-find-connection-buffer nntp-server-buffer))
-    ;; The first time this is run, this variable is `try'.  So we
-    ;; try.
-    (when (eq nntp-server-list-active-group 'try)
-      (nntp-try-list-active (car groups)))
-    (erase-buffer)
-    (let ((count 0)
-         (received 0)
-         (last-point (point-min))
-         (nntp-inhibit-erase t)
-         (command (if nntp-server-list-active-group "LIST ACTIVE" "GROUP")))
-      (while groups
-       ;; Send the command to the server.
-       (nntp-send-command nil command (pop groups))
-       (incf count)
-       ;; Every 400 requests we have to read the stream in
-       ;; order to avoid deadlocks.
-       (when (or (null groups)         ;All requests have been sent.
-                 (zerop (% count nntp-maximum-request)))
-         (nntp-accept-response)
-         (while (progn
-                  (goto-char last-point)
-                  ;; Count replies.
-                  (while (re-search-forward "^[0-9]" nil t)
-                    (incf received))
-                  (setq last-point (point))
-                  (< received count))
-           (nntp-accept-response))))
-
-      ;; Wait for the reply from the final command.
-      (goto-char (point-max))
-      (re-search-backward "^[0-9]" nil t)
-      (when (looking-at "^[23]")
-       (while (progn
-                (goto-char (point-max))
-                (if (not nntp-server-list-active-group)
-                    (not (re-search-backward "\r?\n" (- (point) 3) t))
-                  (not (re-search-backward "^\\.\r?\n" (- (point) 4) t))))
-         (nntp-accept-response)))
-
-      ;; Now all replies are received.  We remove CRs.
-      (goto-char (point-min))
-      (while (search-forward "\r" nil t)
-       (replace-match "" t t))
-
-      (if (not nntp-server-list-active-group)
-         (progn
-           (copy-to-buffer nntp-server-buffer (point-min) (point-max))
-           'group)
-       ;; We have read active entries, so we just delete the
-       ;; superfluous gunk.
-       (goto-char (point-min))
-       (while (re-search-forward "^[.2-5]" nil t)
-         (delete-region (match-beginning 0)
-                        (progn (forward-line 1) (point))))
-       (copy-to-buffer nntp-server-buffer (point-min) (point-max))
-       'active))))
+  (nntp-with-open-group
+   nil server
+   (when (nntp-find-connection-buffer nntp-server-buffer)
+     (catch 'done
+       (save-excursion
+         ;; Erase nntp-server-buffer before nntp-inhibit-erase.
+         (set-buffer nntp-server-buffer)
+         (erase-buffer)
+         (set-buffer (nntp-find-connection-buffer nntp-server-buffer))
+         ;; The first time this is run, this variable is `try'.  So we
+         ;; try.
+         (when (eq nntp-server-list-active-group 'try)
+           (nntp-try-list-active (car groups)))
+         (erase-buffer)
+         (let ((count 0)
+               (groups groups)
+               (received 0)
+               (last-point (point-min))
+               (nntp-inhibit-erase t)
+               (buf (nntp-find-connection-buffer nntp-server-buffer))
+               (command (if nntp-server-list-active-group
+                            "LIST ACTIVE" "GROUP")))
+           (while groups
+             ;; Timeout may have killed the buffer.
+             (unless (gnus-buffer-live-p buf)
+               (nnheader-report 'nntp "Connection to %s is closed." server)
+               (throw 'done nil))
+             ;; Send the command to the server.
+             (nntp-send-command nil command (pop groups))
+             (incf count)
+             ;; Every 400 requests we have to read the stream in
+             ;; order to avoid deadlocks.
+             (when (or (null groups)    ;All requests have been sent.
+                       (zerop (% count nntp-maximum-request)))
+               (nntp-accept-response)
+               (while (and (gnus-buffer-live-p buf)
+                           (progn
+                             ;; Search `blue moon' in this file for the
+                             ;; reason why set-buffer here.
+                             (set-buffer buf)
+                             (goto-char last-point)
+                             ;; Count replies.
+                             (while (re-search-forward "^[0-9]" nil t)
+                               (incf received))
+                             (setq last-point (point))
+                             (< received count)))
+                 (nntp-accept-response))))
+
+           ;; Wait for the reply from the final command.
+           (unless (gnus-buffer-live-p buf)
+             (nnheader-report 'nntp "Connection to %s is closed." server)
+             (throw 'done nil))
+           (set-buffer buf)
+           (goto-char (point-max))
+           (re-search-backward "^[0-9]" nil t)
+           (when (looking-at "^[23]")
+             (while (and (gnus-buffer-live-p buf)
+                         (progn
+                           (set-buffer buf)
+                           (goto-char (point-max))
+                           (if (not nntp-server-list-active-group)
+                               (not (re-search-backward "\r?\n"
+                                                       (- (point) 3) t))
+                             (not (re-search-backward "^\\.\r?\n"
+                                                      (- (point) 4) t)))))
+               (nntp-accept-response)))
+
+           ;; Now all replies are received.  We remove CRs.
+           (unless (gnus-buffer-live-p buf)
+             (nnheader-report 'nntp "Connection to %s is closed." server)
+             (throw 'done nil))
+           (set-buffer buf)
+           (goto-char (point-min))
+           (while (search-forward "\r" nil t)
+             (replace-match "" t t))
+
+           (if (not nntp-server-list-active-group)
+               (progn
+                 (copy-to-buffer nntp-server-buffer (point-min) (point-max))
+                 'group)
+             ;; We have read active entries, so we just delete the
+             ;; superfluous gunk.
+             (goto-char (point-min))
+             (while (re-search-forward "^[.2-5]" nil t)
+               (delete-region (match-beginning 0)
+                              (progn (forward-line 1) (point))))
+             (copy-to-buffer nntp-server-buffer (point-min) (point-max))
+             'active)))))))
 
 (deffoo nntp-retrieve-articles (articles &optional group server)
-  (nntp-possibly-change-group group server)
-  (save-excursion
-    (let ((number (length articles))
-         (count 0)
-         (received 0)
-         (last-point (point-min))
-         (buf (nntp-find-connection-buffer nntp-server-buffer))
-         (nntp-inhibit-erase t)
-         (map (apply 'vector articles))
-         (point 1)
-         article alist)
-      (set-buffer buf)
-      (erase-buffer)
-      ;; Send ARTICLE command.
-      (while (setq article (pop articles))
-       (nntp-send-command
-        nil
-        "ARTICLE" (if (numberp article)
-                      (int-to-string article)
-                    ;; `articles' is either a list of article numbers
-                    ;; or a list of article IDs.
-                    article))
-       (incf count)
-       ;; Every 400 requests we have to read the stream in
-       ;; order to avoid deadlocks.
-       (when (or (null articles)       ;All requests have been sent.
-                 (zerop (% count nntp-maximum-request)))
-         (nntp-accept-response)
-         (while (progn
-                  (set-buffer buf)
-                  (goto-char last-point)
-                  ;; Count replies.
-                  (while (nntp-next-result-arrived-p)
-                    (aset map received (cons (aref map received) (point)))
-                    (setq last-point (point))
-                    (incf received))
-                  (< received count))
-           ;; If number of headers is greater than 100, give
-           ;;  informative messages.
-           (and (numberp nntp-large-newsgroup)
-                (> number nntp-large-newsgroup)
-                (zerop (% received 20))
-                (nnheader-message 6 "NNTP: Receiving articles... %d%%"
-                                  (/ (* received 100) number)))
-           (nntp-accept-response))))
-      (and (numberp nntp-large-newsgroup)
-          (> number nntp-large-newsgroup)
-          (nnheader-message 6 "NNTP: Receiving articles...done"))
-      
-      ;; Now we have all the responses.  We go through the results,
-      ;; washes it and copies it over to the server buffer.
-      (set-buffer nntp-server-buffer)
-      (erase-buffer)
-      (setq last-point (point-min))
-      (mapcar
-       (lambda (entry)
-        (narrow-to-region
-         (setq point (goto-char (point-max)))
-         (progn
-           (insert-buffer-substring buf last-point (cdr entry))
-           (point-max)))
-        (setq last-point (cdr entry))
-        (nntp-decode-text)
-        (widen)
-        (cons (car entry) point))
-       map))))
+  (nntp-with-open-group
+    group server
+   (save-excursion
+     (let ((number (length articles))
+           (articles articles)
+           (count 0)
+           (received 0)
+           (last-point (point-min))
+           (buf (nntp-find-connection-buffer nntp-server-buffer))
+           (nntp-inhibit-erase t)
+           (map (apply 'vector articles))
+           (point 1)
+           article)
+       (set-buffer buf)
+       (erase-buffer)
+       ;; Send ARTICLE command.
+       (while (setq article (pop articles))
+         (nntp-send-command
+          nil
+          "ARTICLE" (if (numberp article)
+                        (int-to-string article)
+                      ;; `articles' is either a list of article numbers
+                      ;; or a list of article IDs.
+                      article))
+         (incf count)
+         ;; Every 400 requests we have to read the stream in
+         ;; order to avoid deadlocks.
+         (when (or (null articles)     ;All requests have been sent.
+                   (zerop (% count nntp-maximum-request)))
+           (nntp-accept-response)
+           (while (progn
+                    (set-buffer buf)
+                    (goto-char last-point)
+                    ;; Count replies.
+                    (while (nntp-next-result-arrived-p)
+                      (aset map received (cons (aref map received) (point)))
+                      (setq last-point (point))
+                      (incf received))
+                    (< received count))
+             ;; If number of headers is greater than 100, give
+             ;;  informative messages.
+             (and (numberp nntp-large-newsgroup)
+                  (> number nntp-large-newsgroup)
+                  (zerop (% received 20))
+                  (nnheader-message 6 "NNTP: Receiving articles... %d%%"
+                                    (/ (* received 100) number)))
+             (nntp-accept-response))))
+       (and (numberp nntp-large-newsgroup)
+            (> number nntp-large-newsgroup)
+            (nnheader-message 6 "NNTP: Receiving articles...done"))
+
+       ;; Now we have all the responses.  We go through the results,
+       ;; wash it and copy it over to the server buffer.
+       (set-buffer nntp-server-buffer)
+       (erase-buffer)
+       (setq last-point (point-min))
+       (mapcar
+        (lambda (entry)
+          (narrow-to-region
+           (setq point (goto-char (point-max)))
+           (progn
+             (insert-buffer-substring buf last-point (cdr entry))
+             (point-max)))
+          (setq last-point (cdr entry))
+          (nntp-decode-text)
+          (widen)
+          (cons (car entry) point))
+        map)))))
 
 (defun nntp-try-list-active (group)
   (nntp-list-active-group group)
@@ -612,43 +839,54 @@ server there that you can connect to.  See also
           (setq nntp-server-list-active-group t)))))
 
 (deffoo nntp-list-active-group (group &optional server)
-  "Return the active info on GROUP (which can be a regexp."
-  (nntp-possibly-change-group nil server)
-  (nntp-send-command "^.*\r?\n" "LIST ACTIVE" group))
+  "Return the active info on GROUP (which can be a regexp)."
+  (nntp-with-open-group
+   nil server
+   (nntp-send-command "^\\.*\r?\n" "LIST ACTIVE" group)))
+
+(deffoo nntp-request-group-articles (group &optional server)
+  "Return the list of existing articles in GROUP."
+  (nntp-with-open-group
+   nil server
+   (nntp-send-command "^\\.*\r?\n" "LISTGROUP" group)))
 
 (deffoo nntp-request-article (article &optional group server buffer command)
-  (nntp-possibly-change-group group server)
-  (when (nntp-send-command-and-decode
-        "\r?\n\\.\r?\n" "ARTICLE"
-        (if (numberp article) (int-to-string article) article))
-    (if (and buffer
-            (not (equal buffer nntp-server-buffer)))
-       (save-excursion
-         (set-buffer nntp-server-buffer)
-         (copy-to-buffer buffer (point-min) (point-max))
-         (nntp-find-group-and-number))
-      (nntp-find-group-and-number))))
+  (nntp-with-open-group
+    group server
+    (when (nntp-send-command-and-decode
+           "\r?\n\\.\r?\n" "ARTICLE"
+           (if (numberp article) (int-to-string article) article))
+      (if (and buffer
+               (not (equal buffer nntp-server-buffer)))
+          (save-excursion
+            (set-buffer nntp-server-buffer)
+            (copy-to-buffer buffer (point-min) (point-max))
+            (nntp-find-group-and-number group))
+        (nntp-find-group-and-number group)))))
 
 (deffoo nntp-request-head (article &optional group server)
-  (nntp-possibly-change-group group server)
-  (when (nntp-send-command
-        "\r?\n\\.\r?\n" "HEAD"
-        (if (numberp article) (int-to-string article) article))
-    (prog1
-       (nntp-find-group-and-number)
-      (nntp-decode-text))))
+  (nntp-with-open-group
+   group server
+   (when (nntp-send-command
+          "\r?\n\\.\r?\n" "HEAD"
+          (if (numberp article) (int-to-string article) article))
+     (prog1
+         (nntp-find-group-and-number group)
+       (nntp-decode-text)))))
 
 (deffoo nntp-request-body (article &optional group server)
-  (nntp-possibly-change-group group server)
-  (nntp-send-command-and-decode
-   "\r?\n\\.\r?\n" "BODY"
-   (if (numberp article) (int-to-string article) article)))
+  (nntp-with-open-group
+   group server
+   (nntp-send-command-and-decode
+    "\r?\n\\.\r?\n" "BODY"
+    (if (numberp article) (int-to-string article) article))))
 
 (deffoo nntp-request-group (group &optional server dont-check)
-  (nntp-possibly-change-group nil server)
-  (when (nntp-send-command "^21.*\n" "GROUP" group)
-    (let ((entry (nntp-find-connection-entry nntp-server-buffer)))
-      (setcar (cddr entry) group))))
+  (nntp-with-open-group 
+    nil server
+    (when (nntp-send-command "^