* gnus.el (gnus-find-method-for-group): On killed/unknown groups, try

[gnus] / texi / message.texi

diff --git a/texi/message.texi b/texi/message.texi
index 8393358..2de9d51 100644 (file)
--- a/texi/message.texi
+++ b/texi/message.texi
@@ -8,8 +8,8 @@
 @copying
 This file documents Message, the Emacs message composition mode.
 
 @copying
 This file documents Message, the Emacs message composition mode.
 

-Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-   2005, 2006 Free Software Foundation, Inc.
+Copyright @copyright{} 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+2004, 2005, 2006 Free Software Foundation, Inc.

 
 @quotation
 Permission is granted to copy, distribute and/or modify this document
 
 @quotation
 Permission is granted to copy, distribute and/or modify this document


@@ -67,9 +67,10 @@ Message mode buffers.
 * Key Index::         List of Message mode keys.
 @end menu
 
 * Key Index::         List of Message mode keys.
 @end menu
 

-This manual corresponds to Message v5.10.6.  Message is distributed
-with the Gnus distribution bearing the same version number as this
-manual.
+@c Adjust ../Makefile.in if you change the following lines:
+Message is distributed with Gnus.  The Gnus distribution
+@c
+corresponding to this manual is No Gnus v0.4.

 
 
 @node Interface
 
 
 @node Interface


@@ -96,6 +97,9 @@ sending it.
 * Mailing Lists::        Send mail to mailing lists.
 @end menu
 
 * Mailing Lists::        Send mail to mailing lists.
 @end menu
 

+You can customize the Message Mode tool bar, see @kbd{M-x
+customize-apropos RET message-tool-bar}.  This feature is only available
+in Emacs.

 
 @node New Mail Message
 @section New Mail Message
 
 @node New Mail Message
 @section New Mail Message


@@ -174,7 +178,8 @@ but you can change the behavior to suit your needs by fiddling with the
 
 @vindex message-dont-reply-to-names
 Addresses that match the @code{message-dont-reply-to-names} regular
 
 @vindex message-dont-reply-to-names
 Addresses that match the @code{message-dont-reply-to-names} regular

-expression will be removed from the @code{Cc} header.
+expression (or list of regular expressions) will be removed from the
+@code{Cc} header. A value of @code{nil} means exclude your name only.

 
 @vindex message-wide-reply-confirm-recipients
 If @code{message-wide-reply-confirm-recipients} is non-@code{nil} you
 
 @vindex message-wide-reply-confirm-recipients
 If @code{message-wide-reply-confirm-recipients} is non-@code{nil} you


@@ -820,10 +825,12 @@ doesn't have to do anything to make the @acronym{MIME} happen---Message will
 automatically add the @code{Content-Type} and
 @code{Content-Transfer-Encoding} headers.
 
 automatically add the @code{Content-Type} and
 @code{Content-Transfer-Encoding} headers.
 

+@findex mml-attach
+@kindex C-c C-a

 The most typical thing users want to use the multipart things in
 @acronym{MIME} for is to add ``attachments'' to mail they send out.
 The most typical thing users want to use the multipart things in
 @acronym{MIME} for is to add ``attachments'' to mail they send out.

-This can be done with the @kbd{C-c C-a} command, which will prompt for
-a file name and a @acronym{MIME} type.
+This can be done with the @kbd{C-c C-a} command (@kbd{M-x mml-attach}),
+which will prompt for a file name and a @acronym{MIME} type.

 
 @vindex mml-dnd-protocol-alist
 @vindex mml-dnd-attach-options
 
 @vindex mml-dnd-protocol-alist
 @vindex mml-dnd-attach-options


@@ -1193,11 +1200,13 @@ Kill the message buffer and exit (@code{message-kill-buffer}).
 @section Mail Aliases
 @cindex mail aliases
 @cindex aliases
 @section Mail Aliases
 @cindex mail aliases
 @cindex aliases

+@cindex completion
+@cindex ecomplete

 
 @vindex message-mail-alias-type
 The @code{message-mail-alias-type} variable controls what type of mail
 
 @vindex message-mail-alias-type
 The @code{message-mail-alias-type} variable controls what type of mail

-alias expansion to use.  Currently only one form is supported---Message
-uses @code{mailabbrev} to handle mail aliases.  If this variable is
+alias expansion to use.  Currently two forms are supported:
+@code{mailabbrev} and @code{ecomplete}.  If this variable is

 @code{nil}, no mail alias expansion will be performed.
 
 @code{mailabbrev} works by parsing the @file{/etc/mailrc} and
 @code{nil}, no mail alias expansion will be performed.
 
 @code{mailabbrev} works by parsing the @file{/etc/mailrc} and


@@ -1215,6 +1224,14 @@ on) headers and press @kbd{SPC} to expand the alias.
 No expansion will be performed upon sending of the message---all
 expansions have to be done explicitly.
 
 No expansion will be performed upon sending of the message---all
 expansions have to be done explicitly.
 

+If you're using @code{ecomplete}, all addresses from @code{To} and
+@code{Cc} headers will automatically be put into the
+@file{~/.ecompleterc} file.  When you enter text in the @code{To} and
+@code{Cc} headers, @code{ecomplete} will check out the values stored
+there and ``electrically'' say what completions are possible.  To
+choose one of these completions, use the @kbd{M-n} command to move
+down to the list.  Use @kbd{M-n} and @kbd{M-p} to move down and up the
+list, and @kbd{RET} to choose a completion.

 
 @node Spelling
 @section Spelling
 
 @node Spelling
 @section Spelling


@@ -1693,56 +1710,73 @@ to this list.
 Valid checks are:
 
 @table @code
 Valid checks are:
 
 @table @code

-@item subject-cmsg
-Check the subject for commands.
-@item sender
-@cindex Sender
-Insert a new @code{Sender} header if the @code{From} header looks odd.
-@item multiple-headers
-Check for the existence of multiple equal headers.
-@item sendsys
-@cindex sendsys
-Check for the existence of version and sendsys commands.
-@item message-id
-Check whether the @code{Message-ID} looks ok.
-@item from
-Check whether the @code{From} header seems nice.
-@item long-lines
-@cindex long lines
-Check for too long lines.
-@item control-chars
-Check for invalid characters.
-@item size
-Check for excessive size.
-@item new-text
-Check whether there is any new text in the messages.
-@item signature
-Check the length of the signature.

 @item approved
 @cindex approved
 Check whether the article has an @code{Approved} header, which is
 something only moderators should include.
 @item approved
 @cindex approved
 Check whether the article has an @code{Approved} header, which is
 something only moderators should include.

+@item continuation-headers
+Check whether there are continuation header lines that don't begin with
+whitespace.
+@item control-chars
+Check for invalid characters.

 @item empty
 Check whether the article is empty.
 @item empty
 Check whether the article is empty.

-@item invisible-text
-Check whether there is any invisible text in the buffer.
-@item empty-headers
-Check whether any of the headers are empty.

 @item existing-newsgroups
 Check whether the newsgroups mentioned in the @code{Newsgroups} and
 @code{Followup-To} headers exist.
 @item existing-newsgroups
 Check whether the newsgroups mentioned in the @code{Newsgroups} and
 @code{Followup-To} headers exist.

-@item valid-newsgroups
-Check whether the @code{Newsgroups} and @code{Followup-to} headers
-are valid syntactically.
+@item from
+Check whether the @code{From} header seems nice.
+@item illegible-text
+Check whether there is any non-printable character in the body.
+@item invisible-text
+Check whether there is any invisible text in the buffer.
+@item long-header-lines
+Check for too long header lines.
+@item long-lines
+@cindex long lines
+Check for too long lines in the body.
+@item message-id
+Check whether the @code{Message-ID} looks syntactically ok.
+@item multiple-headers
+Check for the existence of multiple equal headers.
+@item new-text
+Check whether there is any new text in the messages.
+@item newsgroups
+Check whether the @code{Newsgroups} header exists and is not empty.
+@item quoting-style
+Check whether text follows last quoted portion.

 @item repeated-newsgroups
 Check whether the @code{Newsgroups} and @code{Followup-to} headers
 contains repeated group names.
 @item repeated-newsgroups
 Check whether the @code{Newsgroups} and @code{Followup-to} headers
 contains repeated group names.

+@item reply-to
+Check whether the @code{Reply-To} header looks ok.
+@item sender
+@cindex Sender
+Insert a new @code{Sender} header if the @code{From} header looks odd.
+@item sendsys
+@cindex sendsys
+Check for the existence of version and sendsys commands.
+@item shoot
+Check whether the domain part of the @code{Message-ID} header looks ok.

 @item shorten-followup-to
 Check whether to add a @code{Followup-to} header to shorten the number
 of groups to post to.
 @item shorten-followup-to
 Check whether to add a @code{Followup-to} header to shorten the number
 of groups to post to.

+@item signature
+Check the length of the signature.
+@item size
+Check for excessive size.
+@item subject
+Check whether the @code{Subject} header exists and is not empty.
+@item subject-cmsg
+Check the subject for commands.
+@item valid-newsgroups
+Check whether the @code{Newsgroups} and @code{Followup-to} headers
+are valid syntactically.

 @end table
 
 @end table
 

-All these conditions are checked by default.
+All these conditions are checked by default, except for @code{sender}
+for which the check is disabled by default if
+@code{message-insert-canlock} is non-@code{nil} (@pxref{Canceling News}).

 
 @item message-ignored-news-headers
 @vindex message-ignored-news-headers
 
 @item message-ignored-news-headers
 @vindex message-ignored-news-headers


@@ -1800,6 +1834,9 @@ that look like:
 Hallvard B Furuseth <h.b.furuseth@@usit.uio.no> writes:
 @end example
 
 Hallvard B Furuseth <h.b.furuseth@@usit.uio.no> writes:
 @end example
 

+@c FIXME: Add `message-insert-formated-citation-line' and
+@c `message-citation-line-format'
+

 Point will be at the beginning of the body of the message when this
 function is called.
 
 Point will be at the beginning of the body of the message when this
 function is called.